[Debburn-changes] r439 - cdrkit/trunk/doc/READMEs
Eduard Bloch
blade at alioth.debian.org
Thu Nov 23 20:44:14 CET 2006
Author: blade
Date: 2006-11-23 20:44:13 +0100 (Thu, 23 Nov 2006)
New Revision: 439
Removed:
cdrkit/trunk/doc/READMEs/README
Log:
Too h... with that README, there is not much value in listing dozens of 10 year old recorders and libscg ads
Deleted: cdrkit/trunk/doc/READMEs/README
===================================================================
--- cdrkit/trunk/doc/READMEs/README 2006-11-23 19:33:10 UTC (rev 438)
+++ cdrkit/trunk/doc/READMEs/README 2006-11-23 19:44:13 UTC (rev 439)
@@ -1,492 +0,0 @@
-# README for cdrkit
-
-This README is an adapted version for the cdrkit suite. The old README file
-contents pulled from the cdrtools package (as created by Joerg Schilling) are
-attached below.
-
-Most of the installation instructions mentioned below are void in context of
-cdrkit. Don't rely on them. Read the INSTALL file for instructions on how to
-install cdrkit.
-
-Many compatibility and portability descriptions below are void in context of
-cdrkit. Cdrkit is less portable than cdrtools and may support fewer devices.
-Cdrkit maintainers encourage to submit results from users of non-Linux
-platforms.
-
-Application name(s) have been changed. The wodim executable is the one used for
-CD/DVD recording within the cdrkit suite.
-
-The same applies to most README.<topic> files found in this directory.
-
-Wodim has been successfully tested on the following drives:
-
-BENQ DVD DD DW1640
-Philips CDD 3610
-Lite-ON LTR-24102B
-
-It seems that all drives manufactured in this millenium are MMC compliant and
-therefore they should be supported by wodim. When problems appear, you may have
-found a firmware bug in this drive. Try upgrading the firmware in this case.
-
- -- Eduard Bloch <blade at debian.org> Wed, 06 Sep 2006 18:08:08 +0200
-
-# @(#)README 1.25 02/12/25 Copyright 1996-2002 J. Schilling
-
-This is Version 2.0 of cdrecord
-
-Cdrecord allows you to create CD's on a CD-Recorder.
-Cdrecord runs on:
-
-SunOS 4.1.3 or later: m68k sparc
-Solaris 2.3 or later: sparc x86 ppc.
-
-Linux: alpha x86 IA-64 m68k mips mipsel parisc parisc64 ppc s390 sparc sparc64 strongarm
-
-FreeBSD: alpha arm IA-64 powerpc sparc sparc64 x86 x86-64
-NetBSD: alpha amiga x86 m68k sparc
-OpenBSD: x86
-
-AIX: rs6000
-AmigaOS m68k
-Apollo Domain/OS m68k ???
-Apple Rhapsody: ppc, x86
-Apple MacOS X: ppc
-Apple Darwin: ppc
-BeOS: m68k x86
-BSD/OS (BSDi): sparc x86
-Caldera OpenUnix: x86
-HP-UX: hppa
-GNU HURD: x86
-NeXt Step: mc68xxx x86 and hppa
-OS/2: x86
-OSF1: alpha
-SCO Openserver 5.x: x86
-SCO Unixware 2.x: x86
-SCO Unixware 7.x: x86
-SGI IRIX: mips
-Win95: x86
-Win98: x86
-WinME: x86
-WinNT: x86
-WinNT-5 (aka Win2000): x86
-WinNT-5.1 (aka WinXP): x86
-VMS: *VAX alpha
-QNX: x86 (coming soon)
-
-
-To learn how to compile and install cdrecord, read README.compile
-
-To compile on currently unknown platforms you definitely need 'smake'
-from ftp.berlios.de/pub/smake or ftp.berlios.de/pub/smake
-GNUmake is too dump to do this job as it does not include automake features
-like 'smake' does.
-
-For multi session please read README.multi
-
-In general, it is a good idea to read all README's and check whether
-they may apply for your needs/problems.
-
-Cdrecord runs without problems on a loaded Solaris system.
-On Solaris, cdrecord uses the SVr4 priocntl() call to establish
-SVr4 real-time scheduling which grants to run cdrecord in a even higher
-priority than all kernel processes. On system that provide POSIX real-time
-scheduling the result may be slightly worse as not all POSIX RT implementations
-grant decent real time behaviour.
-
-The cdrtools distribution contains a SCSI user level transport library
-called libscg. The SCSI library is suitable to talk to any SCSI device without
-having a special device specific driver for it.
-Cdrecord may be easily ported to any system that has a generic SCSI device
-driver similar to the scg driver.
-
-On SunOS/Solaris:
-You *need* the SCSI general driver 'scg' in order to run cdrecord.
-
-SunOS 4.1.3 only:
- The 'scg' driver is Copyright 1986-1995 Jörg Schilling,
- it is supplied binary in a loadable format.
- There is no future support, there is no non loadable support.
-
-Solaris only:
- The 'scg' driver is Copyright 1986-1995 Jörg Schilling,
- it is supplied binary in pkgadd(1m) format and is tested
- on Solaris 2.3, Solaris 2.4 & Solaris 2.5 (sparc).
-
-Solaris only:
- It is _nice to have_ the 'fbk' driver to mount files that contain
- images of file systems. Fbk means File simulates Block Device.
-
- The 'fbk' driver is Copyright 1988-1995 Jörg Schilling,
- it is supplied binary in pkgadd(1m) format and is tested
- on Solaris 2.3, Solaris 2.4 & Solaris 2.5 (sparc).
-
-On other OS, libscg uses the SCSI drivers that are present on the system.
-
-Cdrecord-1.3 or later adopts the right BUF_SIZE for each architecture.
-This is to reduce some performance problems on Solaris x86.
-It may be that the reason for this performance problems is that
-the PC-architecture has no IO-MMU and therefore is not able to do DVMA.
-If this points out to be the reason, I have to
-change the scg driver & cdrecord, but this would
-be needed on Linux anyway.
-
-Cdrecord is currently maintained with the following drives:
-
- Plextor PX-W4824A
- Plextor PX-W4012A
- Plextor PX-W2410A
- Plextor PX-W1210S
- Plextor PX-W1210A
- Plextor PX-W124
- Plextor PX-W8220
- Plextor PX-W4220
- Plextor PX-R820
- Plextor PX-R412C
- Yamaha F-1
- Yamaha CRW-2200S
- Yamaha CRW-2200A
- Yamaha CRW-2100S
- Yamaha CRW-4416
- Yamaha CDR-400
- Ricoh MP-7040A
- Ricoh MP-7040S
- Ricoh MP-7060S (available only to Thomas Niederreiter and Heiko Eißfeld)
- Ricoh MP-7063A
- Ricoh MP-7080A
- Ricoh MP-7083A
- Ricoh MP-9060A
- Ricoh MP-7163A
- Ricoh DVD+RW MP5125 (DVD+ writing not yet supported)
- HP DVD-200i (DVD+ writing not yet supported)
- Philips DVD-RW 1208 (DVD+ writing not yet supported)
- TEAC CD-R55S
- TEAC CD-R58S
- TEAC CD-W54E
- TEAC CD-W28E
- Sanyo CDR-Bp2
- Sanyo CDR-Bp3A
- Sony CDU948S
- Sony CRX-145E
- Sony CRX-200E (DDCD writing not supported)
- COMPRO/Matsushita/Panasonic CW-7502
- COMPRO/Matsushita/Panasonic CW-7586
- Philips CDD-2000
- Philips PCRW-804
- Goldstar LG 8080
- AOPEN CRW-4048
- Cyberdrive CW-038D
- Cyberdrive CW-078D
- Pioneer DVD-R A03
-
-It should run also on:
-
- All SCSI-3/mmc compliant drives
- All ATAPI/mmc compliant drives
-
- NOTE:
-
- It seems that all drives that have been initially released in 1999
- or later are MMC compliant. If a recent drive does not work with
- cdrecord, you most likely found a firmware bug in this drive.
- Contact your drive vendor in this case.
-
-Drives that have been reported to work or should work because
-Andy MCFadden (see also http://www.fadden.com/cdrfaq/faq05.html) listed
-them to be identical to working drives. Note that this list may be outdated
-
- ACER CR-1420C
- ACER CDRW 6206A
- AOPEN CRW9420 (Re-writable)
- BTC BCE 621E
- COMPRO CW-7502
- COMPRO/Matsushita/Panasonic CW-7586
- Dysan CR-622 ???? See Wearnes 622
- Dysan CR-1622
- DynaTec CDM-240J (see Pinnacle RCD-4x4)
- DynaTec CDM-240 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- DynaTec CDM-400 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- Grundig CDR-100
- Hewlett Packard 4020i
- Hewlett Packard 6020i
- HP C4324/C4325 (HP SureStore 4020i/6020i)
- HP 7100
- HP 7110
- HP 7200
- HP 8100
- HP 8210
- HP CD-Writer+ M820
- Hi-Val CD-R (see Pinnacle RCD-4x4)
- IMATION CD-RW IMW040420
- JVC XR-W2001 (uses TEAC code - see below - audio not working)
- JVC XR-W2010 (uses TEAC code - see below - audio not working)
- JVC XR-W2020 (uses TEAC code - see below - audio not working)
- JVC XR-W2080 (first MMC drive from JVC)
- Kodak PCD-200 or Kodak PCD-200 Plus
- Kodak PCD-225
- Kodak PCD-240
- Kodak PCD-600
- Matsushita CW-7502
- Matsushita CW-7503
- Matsushita CW-7582
- Matsushita CW-7586
- Memorex CR-622 ???? See Wearnes 622
- Memorex CR-1622
- Memorex CRW-1622
- Microboards PlayWrite 2000 (use cdrecord driver=sony_cdu924 and report inquiry)
- Microboards PlayWrite 4000 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- Microboards PlayWrite 4001RW
- MicroNet MasterCD Plus 4x4 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- MicroNet MasterCD Plus 4x6
- Mitsubishi MCA-CDRW 226
- Mitsumi CR-2401-TS
- Mitsumi CR-2600-TE
- Mitsumi CR-2801-TE
- Mitsumi CR-4801-TE
- Mitsumi CR-4802-TE ???
- Nomai 680.rw
- Olympus CDS615E
- Olympus CDS620E (use cdrecord driver=sony_cdu924 and report inquiry)
- Olympus CD-R2x6 (use cdrecord driver=sony_cdu924 and report inquiry)
- Optima Dis Kovery 650 CD-R
- OTI CDRW 965
- OTI-975 Socrates 1.0 (CDRW)
- Panasonic CW-7502
- Panasonic CW-7503
- Panasonic CW-7582
- Panasonic CW-7586
- Philips CDD 521 (CDD521/02 Revision: 2.06 has bad firmware - seems not to work)
- Philips CDD 521 (upgraded units only: ID: CDD521/10 Revision: 2.07)
- Philips CDD 522
- Philips CDD 2000
- Philips CDD 2600
- Philips CDD 3600
- Philips CDD 3610
- Philips CDRW400
- Philips Omniwriter 26
- Philips Omniwriter 26A
- Philips CDD4201 CD-RW
- Philips PCRW-804
- Pinnacle Micro RCD-1000 (see TEAC/JVC): Need to upgrade firmware to 2.35
- Pinnacle Micro RCD-5020 (see TEAC/JVC - audio not working)
- Pinnacle Micro RCD-5040 (see TEAC/JVC - audio not working)
- Pinnacle Micro RCD-4x4
- Pioneer DW-S114X
- Plasmon CDR 4220
- Plasmon RF-4100
- Plasmon RF-4102
- Plasmon CDR 4400 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- Plasmon CDR 480
- Plextor PX-R24CS (use cdrecord driver=ricoh_ro1420c and report inquiry)
- Plextor PX-R412C
- Plextor PX-R820
- Plextor PX-W4220
- Plextor PX-W8220
- Plextor PX-W124
- Plextor PX-W1210S
- Plextor PX-W1210A
- Procom PCDR 4 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- Ricoh RO-1420C
- Ricoh MP-6200
- Ricoh MP-6200I
- Ricoh MP-6201
- Ricoh MP-7040A
- Ricoh MP-7040S
- Ricoh MP-7060S
- Ricoh MP-7063A
- Ricoh MP-7080A
- Ricoh MP-7083A
- Ricoh MP-9060A
- Sanyo CDR-Bp2
- Sanyo CDR-Bp3
- Smart & Friendly CD-R1002 (use cdrecord driver=sony_cdu924 and report inquiry)
- Smart & Friendly CD-R1004 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- Smart & Friendly CD-R2004 (use cdrecord driver=sony_cdu924 and report inquiry)
- Smart & Friendly CD-R2006 PLUS
- Smart & Friendly CD-R2006 PRO
- Smart & Friendly CD-R4000 (use cdrecord driver=yamaha_cdr100 and report inquiry)
- Smart & Friendly CD-R4006
- Smart & Friendly CD-R4012
- Smart & Friendly CD-RW226
- Smart & Friendly CD-R8020
- Sony CDU920S
- Sony CDU924S
- Sony CDU926S
- Sony CDU928S
- Sony CDU940S
- Sony CDU948S
- Sony CRX-100
- Sony CRX-140
- Sony CRX-145
- Taiyo Yuden CD-WO EW-50
- TEAC CD-R50S
- TEAC CD-R55S
- TEAC CD-R56S
- TEAC CD-R58S
- TEAC CD-W54E
- That's Write CDR-N820S
- Traxdata CDRW-2260EL-PRO
- Traxdata CDR-4120
- Traxdata CDRW-4260
- Turtle Beach 2040R (use cdrecord driver=ricoh_ro1420c and report inquiry)
- WAITEK WT2036
- Wearnes CD-R622
- Wearnes CD-R632P
- Yamaha CDR-100
- Yamaha CDR-102
- Yamaha CDR-200
- Yamaha CDR-400(Firmware revision 1.0d and up otherwise upgrade)
- Yamaha CDR-401
- Yamaha CRW-4001
- Yamaha CRW-2260
- Yamaha CRW-2261
- Yamaha CRW-4260
- Yamaha CRW-4261
- Yamaha CRW-4416
- Yamaha CRW-6416
- Yamaha CRW-8424
- Yamaha CRW-2100
-
-Multi-session has not been tested with the Plasmon RF-4100
-
-All companies that support me with SCSI command reference manuals and drives
-will get (continued) support in the following releases.
-
-The following drives will never be supported by cdrecord because they are too old:
-
- JVC XR-W1001
- Pinnacle Micro RCD-202
- Ricoh RS-9200CD
-
-The following drives are currently not supported because I don't get specs:
-(some of them may partially work: see above)
-
- Creative Labs CDR 4210
- JVC XR-W2001
- JVC XR-W2010
- JVC XR-W2020
- Pinnacle Micro RCD-1000
- Pinnacle Micro RCD-5020
- Pinnacle Micro RCD-5040
- Plasmon CDR-4240
- Sony CDW-900E
-
-The following drives may get support soon (If I get time to do so):
-
- Panasonic CW-7501
- Ricoh RS-1060C
-
-If you understang German, it makes sense to have a look at http://www.dchlb.de/
-and http://www.brennmeister.com/ for additional information.
-
-To install get:
-
-Solaris only:
- SCHILYscg.sparc.tar.Z The scg driver in pkgadd format (sparc).
- SCHILYfbk.sparc.tar.Z The fbk driver in pkgadd format (sparc).
- SCHILYscg.i386.tar.Z The scg driver in pkgadd format (x86).
- SCHILYfbk.i386.tar.Z The fbk driver in pkgadd format (x86).
-
-Note that the fbk driver packet is for Solaris 2.4 and not system independent.
-
-All Systems:
- cdrtools-2.0.tar.gz The cdrtools for source distribution.
-
-NOTE: All these tar archives are 100% ansi compatible. Solaris 2.x tar and GNU
- tar may get some minor trouble.
-
-WARNING: Do not use 'mc' to extract the tar file!
- All mc versions before 4.0.14 cannot extract symbolic links correctly.
-
-To unpack the archive use:
-
- gzip -d < cdrtools-2.0.tar.gz | tar -xpf -
-
- Replace 'cdrtools-2.0' by the actual archive name.
-
- If your Platform does not support hard links or symbolic links, you
- first need to compile "star" and then call:
-
- star -xpz -copy-links < cdrtools-2.0.tar.gz
-
- If your platform does not support hard links but supports
- symbolic links, you only need to call the command above once.
- If your platform does not support symbolic links, you need to call
- the command twice because a symbolic link may occur in the archive
- before the file it points to.
-
-
-
-
-
-The files are located on:
-
-ftp://ftp.berlios.de/pub/cdrecord/ ...
-ftp://ftp.berlios.de/pub/schily/kernel/scg/ ...
-ftp://ftp.berlios.de/pub/schily/kernel/fbk/ ...
-
-Only use the mkisofs that is contained in this release.
-All other mkisofs versions are too buggy.
-
-
-Installation Process:
-
-Solaris only:
- 1) scg driver
- untar SCHILYscg.tar:
- su
- Password: xxxxx
- cd /tmp
- zcat SCHILYscg.tar | tar -xvf -
- pkgadd -d .
- reboot -- -r
-
- 2) fbk driver
- similar to scg driver (see above)
-
- 3) Switch the CD-Writer to an unused target id (2 should do it)
-
-
-NOTE:
- Be very careful. pkgadd does not check for the right target
- architecture. Do not install drivers for intel on sparc
- and vice versa. You will get a corrupt system.
-
- You need to be root because you need access to /dev/scg? and to be
- able to put cdrecord into the real-time scheduling class.
-
-All Systems:
-
-The SCSI transport library has been taken from the sformat program.
-Sformat is the first SCSI disk formatting/analyzing/repairing that runs on
-SunOS/Solaris. The first release of sformat has been made for SunOS 3.0
-(two years before Sun introduced their format utility). Sformat source
-including 10 years of competence in SCSI disk handling is available
-on:
- ftp://ftp.berlios.de/pub/sformat
-
-I am interested to hear if someone is interested in a kernel based
-filesystem for Solaris that uses packet writing on the CD-Recorder.
-The filesystem will create a single session CD that may be finally converted
-to a hybrid filesystem that allows to be read as
-ISO-9660 with Rock Ridge extensions too.
-Please mail suggestions to: wofs at schily.isdn.cs.tu-berlin.de
-
-If you want to use the CD-recorder as CD-ROM device, have a look at
-
-Solaris only:
-ftp://ftp.berlios.de/pub/schily/kernel/sd
-
-Current information on cdrecord may be found on:
-
- http://www.fokus.fhg.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html
-
-
- Joerg Schilling
-
- (really Jörg Schilling if you have ISO-8859-1)
-
-If you have questions mail to:
-
- HOME: joerg at schily.isdn.cs.tu-berlin.de
- UNIVERSITY: js at cs.tu-berlin.de
- WORK: schilling at fokus.fhg.de
More information about the Debburn-changes
mailing list