System ----------------------- K3b Version: 1.0.1 KDE Version: 3.5.5 "release 45.4" QT Version: 3.3.7 Kernel: 2.6.18.8-0.3-default Devices ----------------------- LG CD-ROM CRD-8521B 1.01 (/dev/hdc, ) [CD-ROM] [Fehler] [Keine] PLEXTOR DVDR PX-712A 1.07 (/dev/hdb, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW] [DVD-ROM, DVD-R Sequentiell, DVD-RW Eingeschränktes Überbrennen, DVD-RW Sequentiell, DVD+RW, DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben] Used versions ----------------------- cdrecord: 1.0pre1 cdrecord ----------------------- This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any way, don't refer to it as "cdrecord". Send problem reports to debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any problems caused by this application. Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling scsidev: '/dev/hdb' devname: '/dev/hdb' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). /usr/bin/wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 TOC Type: 0 = CD-DA Using libscg version 'debburn project-0.8ubuntu1+debburn1'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'DVDR PX-712A ' Revision : '1.07' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC GIGAREC FORCESPEED SPEEDREAD SINGLESESSION HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 4802784 = 4690 KB Drive DMA Speed: 7224 kB/s 41x CD 5x DVD FIFO size : 4194304 = 4096 KB /usr/bin/wodim: DMA speed too slow (OK for 33x). Cannot write at speed 48x. Track 01: audio 33 MB (03:16.90) no preemp swab Track 02: audio 36 MB (03:34.00) no preemp swab Total size: 69 MB (06:50.90) = 30818 sectors Lout start: 69 MB (06:52/68) = 30818 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable ATIP start of lead in: -11674 (97:26/26) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 23 Manufacturer: SKC Co., Ltd. Single session is OFF. Hide CDR is OFF. Speed-Read is OFF. GigaRec is off. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 329030 Forcespeed is OFF. Power-Rec is ON. Power-Rec write speed: 48x (recommended) Speed set to 8467 KB/s Starting to write CD/DVD at speed 48.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Performing OPC... /usr/bin/wodim: Success. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 33.842s timeout 200s /usr/bin/wodim: OPC failed. Writing time: 41.715s resid: 4 Last selected write speed: 48x Max media write speed: 48x Last actual write speed: 0x BURN-Free was never needed. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/hdb speed=48 -dao driveropts=burnfree -eject -useinfo -audio /tmp/kde-horst/k3b_audio_2_01.inf /tmp/kde-horst/k3b_audio_2_02.inf