[Debian-ppc64-devel] Successful installation in an OpenPower 720
Express
Roberto Suarez Soto
robe at allenta.com
Wed Sep 14 11:50:34 UTC 2005
Hi,
after finishing with a pSeries 6E4 (Power4), we've been lucky to
have an OpenPower 720 Express to test Debian on it. I'm attaching the dmesg
output with this message (file "dmesg-marduk.txt"). Thanks to all involved
for your efforts in making this work :-)
Notes about the installation:
I used the ISO at
http://ftp.uni-augsburg.de/pub/tuxppc/test/Debian-Installer-CD/. It
installed correctly, but when I booted it crashed. I think it was the
problem addressed by Harald Görl (the creator of the CD) relative to Matrox
support in the kernel (message of 09 Jun 2005). The installation kernel
worked perfectly, but the kernel that is installed (though it has the
option CONFIG_FB_MATROX=y, which IIRC was the issue) crashed. I'm attaching
the output of the kernel until the crashing (file "dmesg-kaboom.txt").
I used the installation CD to mount the installed system and
retrieve the latest kernel in Sven's website
(http://people.debian.org/~luther/ppc64/),
kernel-image-2.6.12-sven64_1_powerpc.deb. I installed it, and voila, it
booted. The differences relative to Matrox between those two kernels are
these ("diff 2.6.11-pseries 2.6.12-sven64"):
> CONFIG_W1_MATROX=m
4,6c5,8
< # CONFIG_FB_MATROX_G is not set
< # CONFIG_FB_MATROX_I2C is not set
< # CONFIG_FB_MATROX_MULTIHEAD is not set
---
> CONFIG_FB_MATROX_G=y
> CONFIG_FB_MATROX_I2C=m
> CONFIG_FB_MATROX_MAVEN=m
> CONFIG_FB_MATROX_MULTIHEAD=y
So any of those options has something to do with the crash. I don't
know if the difference between initrds is also implicated. You tell me :-)
I used Cajus' mirror. I don't know if I could have used the
official one (I was in a hurry and wanted to play safe). Could I? I'm
willing to try another install, I've done nothing yet with this
installation and don't mind wiping it all now that I know it can be
installed :-)
And in a slightly related note ... does anyone know how to
configure the RAID controller in these things? I realized it had one when I
did a dmesg (we didn't receive any tech specs with the OP), and I like to
configure it properly. Any pointer to documentation will be greatly
appreciated. Thanks in advance :-)
--
Roberto Suarez Soto Allenta Consulting
robe at allenta.com www.allenta.com
-------------- next part --------------
Loading ramdisk...
ramdisk loaded at 02200000, size: 1776 Kbytes
OF stdout device is: /vdevice/vty at 30000000
Hypertas detected, assuming LPAR !
command line: root=/dev/sda2 ro ramdisk_size=8192
memory layout at init:
alloc_bottom : 00000000023bc000
alloc_top : 0000000008000000
alloc_top_hi : 00000000ef000000
rmo_top : 0000000008000000
ram_top : 00000000ef000000
Looking for displays
found display : /pci at 800000020000002/pci at 2,6/pci at 1/display at 0, opening ... done
instantiating rtas at 0x00000000077d7000... done
0000000000000000 : boot cpu 0000000000000000
0000000000000002 : starting cpu hw idx 0000000000000002... done
Processor is not HMT capable
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000026bd000 -> 0x00000000026be297
Device tree struct 0x00000000026bf000 -> 0x00000000026d7000
Found initrd at 0xc000000002200000:0xc0000000023bc000
firmware_features = 0x1ffd5f
Partition configured for 4 cpus.
Starting Linux PPC64 2.6.11-pseries
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_debug_switch = 0x0
ppc64_interrupt_controller = 0x2
systemcfg = 0xc000000000005000
systemcfg->platform = 0x101
systemcfg->processorCount = 0x4
systemcfg->physicalMemorySize = 0xef000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.11-pseries (root at ppclinux) (gcc version 3.3.3 (Debian 20040401)) #1 SMP Thu Mar 10 15:36:53 CE5
[boot]0012 Setup Arch
Node 0 Memory: 0x0-0xef000000
0000000000000001 : starting thread
0000000000000003 : starting thread
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using dedicated idle loop
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro ramdisk_size=8192
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 188.045000 MHz
time_init: processor frequency = 1504.360000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 3839232k/3915776k available (2576k kernel code, 76208k reserved, 1284k data, 253k bss, 216k init)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Processor 1 found.
Processor 2 found.
Processor 3 found.
Brought up 4 CPUs
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 1776k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging disabled
mapping IO 3fe00200000 -> e000000000000000, size: 100000
mapping IO 3fe00700000 -> e000000000100000, size: 100000
PCI: Probing PCI hardware done
usbcore: registered new driver hub
TC classifier action (bugs to netdev at oss.sgi.com cc hadi at cyberus.ca)
i/pSeries Real Time Clock Driver v1.1
RTAS daemon started
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Using unsupported 640x480 MTRX,G450 at c0000000, depth=8, pitch=640
Oops: Kernel access of bad area, sig: 7 [#1]
SMP NR_CPUS=32 NUMA PSERIES LPAR
Modules linked in:
NIP: C000000000171038 XER: 0000000D LR: C000000000165E70 CTR: C000000000170BC4
REGS: c0000000023d2dc0 TRAP: 0300 Not tainted (2.6.11-pseries)
MSR: 8000000000009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 CR: 24042044
DAR: e000000080000000 DSISR: 0000000042000000
TASK: c000000005b697e0[1] 'swapper' THREAD: c0000000023d0000 CPU: 1
GPR00: 0000000000000000 C0000000023D3040 C0000000004673D8 000000000000000F
GPR04: C0000000EEC90000 0000000000000000 C0000000EEC90000 E000000080000000
GPR08: E000000080000004 0000000000000000 E000000080000000 0000000000000004
GPR12: C000000002656280 C000000000374800 0000000000000000 0000000000000000
GPR16: 0000000000000002 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000001 0000000000000000 0000000000000001
GPR24: C0000000003C4E08 000000000000000F 0000000000000000 0000000000000004
GPR28: C000000002664000 0000000000000000 C0000000003F66D8 C0000000023D3040
NIP [c000000000171038] .cfb_imageblit+0x474/0x68c
LR [c000000000165e70] .soft_cursor+0x1e0/0x270
Call Trace:
[c0000000023d3040] [c000000000375000] 0xc000000000375000 (unreliable)
[c0000000023d3150] [c000000000165e70] .soft_cursor+0x1e0/0x270
[c0000000023d3220] [c00000000015f99c] .bit_cursor+0x3b8/0x61c
[c0000000023d3380] [c00000000015a6dc] .fbcon_cursor+0x220/0x30c
[c0000000023d3440] [c00000000018957c] .hide_cursor+0x5c/0x8c
[c0000000023d34d0] [c000000000189b3c] .redraw_screen+0x2e0/0x2e4
[c0000000023d3580] [c000000000158ab0] .fbcon_prepare_logo+0x318/0x460
[c0000000023d3670] [c000000000159e1c] .fbcon_init+0x338/0x3c8
[c0000000023d3750] [c000000000189d64] .visual_init+0x1d8/0x27c
[c0000000023d3800] [c00000000018f008] .take_over_console+0x448/0x668
[c0000000023d38e0] [c00000000015872c] .fbcon_takeover+0xa4/0x110
[c0000000023d3970] [c00000000015eae0] .fbcon_fb_registered+0xe8/0xf8
[c0000000023d3a10] [c00000000015ec8c] .fbcon_event_notify+0xb8/0x110
[c0000000023d3aa0] [c000000000065c8c] .notifier_call_chain+0x60/0xa4
[c0000000023d3b30] [c0000000001619f4] .register_framebuffer+0x164/0x1f4
[c0000000023d3c30] [c00000000030ecec] .offb_init_fb+0x2f8/0x584
[c0000000023d3d20] [c00000000030e9bc] .offb_init_nodriver+0x1fc/0x234
[c0000000023d3de0] [c00000000030e794] .offb_init+0xf4/0x120
[c0000000023d3e70] [c0000000002eeb34] .do_initcalls+0x68/0x134
[c0000000023d3f00] [c00000000000c378] .init+0x7c/0x1e0
[c0000000023d3f90] [c000000000013750] .kernel_thread+0x4c/0x6c
Instruction dump:
39080004 796b0020 2f00ffff 7c0507b4 7d295e30 2f8b0000 7f294838 79291764
7c09c02e 7c00d038 7c00ea78 78000020 <900a0000> 409e000c 39600008 38c60001
<0>Kernel panic - not syncing: Attempted to kill init!
-------------- next part --------------
Found initrd at 0xc000000002200000:0xc000000002404000
firmware_features = 0x1ffd5f
Partition configured for 4 cpus.
Starting Linux PPC64 2.6.12-sven64
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_debug_switch = 0x0
ppc64_interrupt_controller = 0x2
systemcfg = 0xc000000000358000
systemcfg->platform = 0x101
systemcfg->processorCount = 0x4
systemcfg->physicalMemorySize = 0xef000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.12-sven64 (sven at tael) (gcc version 4.0.1 (Debian 4.0.1-1ubuntu1)) #2 SMP Fri Jul 15 20:13:02 UTC 2005
[boot]0012 Setup Arch
Node 0 Memory: 0x0-0xef000000
Syscall map setup, 242 32 bits and 220 64 bits syscalls
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using dedicated idle loop
On node 0 totalpages: 978944
DMA zone: 978944 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro ramdisk_size=8192
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 188.047000 MHz
time_init: processor frequency = 1504.376000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 3838332k/3915776k available (2852k kernel code, 76764k reserved, 1348k data, 268k bss, 236k init)
Calibrating delay loop... 374.78 BogoMIPS (lpj=187392)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Processor 1 found.
Processor 2 found.
Processor 3 found.
Brought up 4 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
domain 1: span 0000000f
groups: 00000003 0000000c
domain 2: span 0000000f
groups: 0000000f
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
domain 1: span 0000000f
groups: 00000003 0000000c
domain 2: span 0000000f
groups: 0000000f
CPU2 attaching sched-domain:
domain 0: span 0000000c
groups: 00000004 00000008
domain 1: span 0000000f
groups: 0000000c 00000003
domain 2: span 0000000f
groups: 0000000f
CPU3 attaching sched-domain:
domain 0: span 0000000c
groups: 00000008 00000004
domain 1: span 0000000f
groups: 0000000c 00000003
domain 2: span 0000000f
groups: 0000000f
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2064k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging enabled
mapping IO 3fe00200000 -> e000000000000000, size: 100000
mapping IO 3fe00700000 -> e000000000100000, size: 100000
PCI: Probing PCI hardware done
i/pSeries Real Time Clock Driver v1.1
probe_bus_pseries: processing c0000000eeff78a0
probe_bus_pseries: processing c0000000eeff7a88
RTAS daemon started
probe_bus_pseries: processing c0000000eeff7c70
probe_bus_pseries: processing c0000000eeff7dd8
probe_bus_pseries: processing c0000000eeff7f60
RTAS: event: 13, Type: Dump Notification Event, Severity: 2
audit: initializing netlink socket (disabled)
audit(12601584.088:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
matroxfb: probe of 0000:d9:00.0 failed with error -1
Using unsupported 640x480 display at 40080000000, depth=8, pitch=640
Console: switching to colour frame buffer device 80x30
fb0: Open Firmware frame buffer device on /pci at 800000020000002/pci at 2,6/pci at 1/display at 0
vio_register_driver: driver hvc_console registering
HVSI: registered 2 devices
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh at kernel.crashing.org>)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2064KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 236k freed
NET: Registered protocol family 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:c8:01.0: NEC Corporation USB
ohci_hcd 0000:c8:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:c8:01.0: irq 133, io mem 0x400b8001000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: over-current change on port 1
ohci_hcd 0000:c8:01.1: NEC Corporation USB (#2)
ohci_hcd 0000:c8:01.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:c8:01.1: irq 133, io mem 0x400b8000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device: (0000:c8:01.2), cmd 142
ehci_hcd 0000:c8:01.2: NEC Corporation USB 2.0
ehci_hcd 0000:c8:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:c8:01.2: irq 133, io mem 0x400b8002000
ehci_hcd 0000:c8:01.2: park 0
ehci_hcd 0000:c8:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Enabling device: (0001:c0:01.0), cmd 143
e100: eth0: e100_probe: addr 0x401e8030000, irq 163, MAC addr 00:0D:60:0B:40:67
PCI: Enabling device: (0001:d8:01.0), cmd 143
e100: eth1: e100_probe: addr 0x401c0030000, irq 169, MAC addr 00:0D:60:0B:40:6A
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
PCI: Enabling device: (0001:c8:01.0), cmd 143
usb 2-1: new low speed USB device using ohci_hcd and address 3
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Enabling device: (0001:c8:01.1), cmd 143
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
SCSI subsystem initialized
ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21, 2005)
ipr 0000:d0:01.0: Found IOA with IRQ: 135
ipr 0000:d0:01.0: Starting IOA initialization sequence.
ipr 0000:d0:01.0: Adapter firmware version: 03090061
ipr 0000:d0:01.0: IOA initialized.
scsi0 : IBM 5703 Storage Adapter
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: VSBPD4E2 U4SCSI Rev: 5105
Type: Enclosure ANSI SCSI revision: 02
scsi: unknown device type 31
Vendor: IBM Model: 5703001 Rev: 0150
Type: Unknown ANSI SCSI revision: 00
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A0057
ipr 0001:d0:01.0: IOA initialized.
scsi1 : IBM 570B Storage Adapter
Vendor: IBM Model: DDS Gen5 Rev: V314
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28G
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770
Type: Enclosure ANSI SCSI revision: 02
scsi: unknown device type 31
Vendor: IBM Model: 570B001 Rev: 0150
Type: Unknown ANSI SCSI revision: 00
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target5/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 5, lun 0
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target8/lun0:
Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host1/bus0/target5/lun0:
Attached scsi disk sdc at scsi1, channel 0, id 5, lun 0
SCSI device sdd: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdd: drive cache: write through
SCSI device sdd: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdd: drive cache: write through
/dev/scsi/host1/bus0/target8/lun0:
Attached scsi disk sdd at scsi1, channel 0, id 8, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3905528k swap on /dev/sda3. Priority:-1 extents:1
EXT3 FS on sda2, internal journal
PDC20275: IDE controller at PCI slot 0000:cc:01.0
PCI: Enabling device: (0000:cc:01.0), cmd 3
PDC20275: chipset revision 1
PDC20275: 100% native mode on irq 134
ide2: BM-DMA at 0xeec00-0xeec07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xeec08-0xeec0f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: IBM DROM00205, ATAPI CD/DVD-ROM drive
ide2 at 0xee400-0xee407,0xedc02 on irq 134
Probing IDE interface ide3...
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw at saw.sw.com.sg> and others
usbcore: registered new driver hiddev
input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:c8:01.1-1
input,hiddev0: USB HID v1.10 Mouse [NOVATEK USB Keyboard] on usb-0000:c8:01.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ts: Compaq touchscreen protocol output
e1000: eth2: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 17
RTAS: event: 14, Type: Dump Notification Event, Severity: 2
NET: Registered protocol family 10
Disabled Privacy Extensions on device c000000000431c50(lo)
IPv6 over IPv4 tunneling driver
eth2: no IPv6 routers present
More information about the Debian-ppc64-devel
mailing list