From drogariamodelo at veloxmail.com.br Sun Jul 1 03:48:34 2012 From: drogariamodelo at veloxmail.com.br (=?utf-8?Q?An=C3=BAncio?=) Date: Sun, 1 Jul 2012 00:48:34 -0300 (BRT) Subject: =?utf-8?Q?Empresa_introdu=C3=A7=C3=A3o_empr=C3=A9stimo_para?= =?utf-8?Q?_ambos_os_clientes_novos_e_antigos.?= Message-ID: <15611106.2741242.1341114514939.JavaMail.root@r-zv1> Ol? amigo, Isto ? para informar que M.J.Santos Lda Empresa est? concedendo linhas de cr?dito a seus clientes antigos e novos, dois por cento de juros dentro do intervalo m?nimo de 10.000.00Euros a um m?ximo de 10.000.000.00Euros. M.J.Santos Lda consultoria com base para a d?vida internacional e financiamento de projetos de capital, al?m de financiar hipotecas comerciais no mercado mundial. N?s somos certificadas empr?stimo credor e oferecer empr?stimos garantidos aos indiv?duos e empresas a juros baixos. Oferecemos empr?stimos a longo ea curto prazo. Nossa empresa tem registrado uma s?rie de inova??es na presta??o de servi?os financeiros de primeira classe aos nossos clientes, especialmente na ?rea de sindica??o de empr?stimos e de oferta de capital para os indiv?duos e empresas. Estamos focados em tentar preencher o vazio que existe onde h? poucas op??es de financiamento adequado dos grandes projectos de imobili?rias e corporativas e, especialmente, se o pedido for grande e / ou situa-se fora do territ?rio continental dos Estados Unidos, alian?as estrat?gicas com os EUA base Banqueiros de investimento, Grupos privados de investimento e investidores privados, alguns com escrit?rios regionais em cidades principais do mundo, nos d? a capacidade de entregar solu??es de financiamento exclusivo e inovador projeto para nossos clientes. Nosso servi?o foi reposicionado e padronizados para atender ?s demandas dos clientes de uma maneira econ?mica. Nossa taxa de juros ? de fato razo?vel, oferecemos servi?o de empr?stimo hassle livre, onde os clientes est?o autorizados a fazer o reembolso ao longo de um per?odo de tempo. Oportunidades de financiamento incluir? Corporativo Finan?as (incluindo fus?es e aquisi??es), Privado Equidade Investimentos, D?vida e Finan?as Comum Ventures para as empresas e promotores internacionais, bem como de hipotecas comerciais e ao financiamento intercalar, para as empresas dos EUA. A localiza??o geogr?fica de interesse s?o democracias est?veis das Am?ricas, Europa e ?sia, n?o-democracias com economias emergentes e pa?ses em desenvolvimento numa base caso a caso. Por fim, fundo de empresa de cr?dito de pequena escala, os intermedi?rios, em pequena escala para as institui??es financeiras que disp?em de capital ilimitado. Para mais detalhes ir sobre a aquisi??o de um empr?stimo que voc? est? aconselho a contactar-nos de volta com seu, Seu nome completo, Montante Necess?rio, Dura??o do Empr?stimo, N?mero de telefone e Pa?s para que possamos realizar o processamento do empr?stimo. Obrigado, M.J.Santos Lda S?nior M.J.Santos Lda In't Gest?o. From unicegukama at yahoo.com Sun Jul 1 05:46:51 2012 From: unicegukama at yahoo.com (Vera Desmond) Date: Sat, 30 Jun 2012 22:46:51 -0700 (PDT) Subject: It is my pleasure to contact you, Message-ID: <1341121611.11280.YahooMailClassic@web114402.mail.gq1.yahoo.com> It is my pleasure to contact you, ?My name is Vera Desmond and i will be very happy to receive a positive reply from you, I know that it does not cost anything to make friends. I hope we can be friends, chat together and share ideas irrespective of our race, language or even religion. I will tell you more about me with my picture in next message. Please i am hoping to hear from you. Thanks and have a good day, >From your new friend, Vera Desmond. -------------- next part -------------- An HTML attachment was scrubbed... URL: From oneingray at gmail.com Sun Jul 1 05:49:47 2012 From: oneingray at gmail.com (Ivan Shmakov) Date: Sun, 01 Jul 2012 12:49:47 +0700 Subject: Bug#540406: Closing the bug In-Reply-To: (Anton Gladky's message of "Sat, 30 Jun 2012 21:32:10 +0200") References: Message-ID: <86vci8do90.fsf@gray.siamics.net> reopen 540406 thanks >>>>> Anton Gladky writes: > there was no meaningful answer to the moreinfo mail. Unfortunately, I didn't receive a copy. (I'm unsure if Debian's netiquette says anything about Cc: to BUGNO-submitter at bugs.debian.org, but I'd appreciate a copy anyway.) > That is why I'm closing the bug. Please, feel free to reopen it if > you think the bug is still there, or fill a new bug. The issue I was reporting (quoted below) is indeed still there. The ?x11? and ?wxt? drivers are quite distinct, and one may opt to install one of them but not other, which is clearly impossible when they belong to the same package. The problem is that the gnuplot-x11 package offers both the ?x11? and ?wxt? packages, and thus has all the dependencies for both. In some circumstances, I'd like to avoid dependencies on GTK and Pango, which are brought by the wxWidgets-based driver. Isn't it possible to build a single /usr/bin/gnuplot binary with all the relevant support for all the graphical interactive terminals supported by Debian, and then provide the necessary lib/gnuplot/ driver binaries in three separate packages (gnuplot-x11, gnuplot-wxt, gnuplot-qt)? It would also make the descriptions of the binary packages less confusing, cf. Christoph Bersch: I think the current configuration can also confuse users, because the names suggest, that only X11 and qt are supported as interactive terminals: TIA. -- FSF associate member #7257 From owner at bugs.debian.org Sun Jul 1 06:36:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 01 Jul 2012 06:36:06 +0000 Subject: Processed: Re: Closing the bug References: <86vci8do90.fsf@gray.siamics.net> Message-ID: Processing commands for control at bugs.debian.org: > reopen 540406 Bug #540406 {Done: Anton Gladky } [gnuplot] the wxt driver deserves its own package Bug reopened Ignoring request to alter fixed versions of bug #540406 to the same values previously set > thanks Stopping processing here. Please contact me if you need assistance. -- 540406: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=540406 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From gladky.anton at gmail.com Sun Jul 1 06:53:59 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Sun, 1 Jul 2012 08:53:59 +0200 Subject: Bug#540406: Closing the bug In-Reply-To: <86vci8do90.fsf@gray.siamics.net> References: <86vci8do90.fsf@gray.siamics.net> Message-ID: 2012/7/1 Ivan Shmakov : > ... > Isn't it possible to build a single /usr/bin/gnuplot binary with > all the relevant support for all the graphical interactive > terminals supported by Debian, and then provide the necessary > lib/gnuplot/ driver binaries in three separate packages > (gnuplot-x11, gnuplot-wxt, gnuplot-qt)? I do not think so. We have now: gnuplot-nox, gnuplot-x11 and gnuplot-qt. Such structure is clear and no need to add one more gnuplot-wxt. That is my point of view. Anton From oneingray at gmail.com Sun Jul 1 07:40:27 2012 From: oneingray at gmail.com (Ivan Shmakov) Date: Sun, 01 Jul 2012 14:40:27 +0700 Subject: Bug#540406: the wxt driver deserves its own package In-Reply-To: (Anton Gladky's message of "Sun, 1 Jul 2012 08:53:59 +0200") References: <86vci8do90.fsf@gray.siamics.net> Message-ID: <86hatsdj4k.fsf_-_@gray.siamics.net> >>>>> Anton Gladky writes: >>>>> 2012/7/1 Ivan Shmakov : >> Isn't it possible to build a single /usr/bin/gnuplot binary with all >> the relevant support for all the graphical interactive terminals >> supported by Debian, and then provide the necessary lib/gnuplot/ >> driver binaries in three separate packages (gnuplot-x11, >> gnuplot-wxt, gnuplot-qt)? > I do not think so. As I've just checked, while the ?x11? and ?qt? drivers are provided as external binaries (under lib/gnuplot/), the ?wxt? one is apparently compiled into the main gnuplot binary itself. If I'm right in my guess that the library dependencies of the latter on the Qt libraries are superfluous (I hope to check it the next week), then that may be one more reason to keep the ?wxt? driver separate. Should my assumptions be right, I'd suggest the binary packages to be as follows: gnuplot provides /usr/bin/gnuplot compiled /with/ wxWidgets; gnuplot-nox (or gnuplot-nowx?) provides /usr/bin/gnuplot compiled /without/ wxWidgets; gnuplot-x11 provides gnuplot_x11 only; Depends: gnuplot | gnuplot-nox; gnuplot-qt provides gnuplot_qt only; Depends: gnuplot | gnuplot-nox. Also, the layout above could reduce the package sizes somewhat, as there would only be two (instead of three) packages holding all the share/ stuff. Alternatively, share/ could be split off to a single gnuplot-common instead. > We have now: gnuplot-nox, gnuplot-x11 and gnuplot-qt. Such structure > is clear and no need to add one more gnuplot-wxt. That is my point > of view. First of all, I do not contest the clarity. Second, the present state of affairs is that the user isn't allowed to install the ?x11? driver without also installing libwxgtk2.8-0, like: # apt-get install -V -- gnuplot-x11 libwxgtk2.8-0- Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gnuplot-x11 : Depends: libwxgtk2.8-0 (>= 2.8.12.1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. # While I believe that the ?x11? driver /per se/ is (still) perfectly usable without wxWidgets. -- FSF associate member #7257 From christoph at debian.org Sun Jul 1 11:09:26 2012 From: christoph at debian.org (Christoph Egger) Date: Sun, 01 Jul 2012 13:09:26 +0200 Subject: Bug#679762: dolfin: FTBFS: Armadillo could not be found. Be sure to set ARMADILLO_DIR. (missing: ARMADILLO_TEST_RUNS) Message-ID: <877gunzqjd.fsf@hepworth.siccegge.de> Package: src:dolfin Version: 1.0.0-7 Severity: serious Tags: sid wheezy Justification: fails to build from source (but built successfully in the past) Hi! Your package failed to build on the buildds: -- Performing Test ARMADILLO_BLAS_TEST_RUNS - Failed -- Performing Test ARMADILLO_GFORTRAN_TEST_RUNS -- Performing Test ARMADILLO_GFORTRAN_TEST_RUNS - Failed CMake Error at /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:97 (MESSAGE): Armadillo could not be found. Be sure to set ARMADILLO_DIR. (missing: ARMADILLO_TEST_RUNS) Call Stack (most recent call first): /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:288 (_FPHSA_FAILURE_MESSAGE) cmake/modules/FindArmadillo.cmake:178 (find_package_handle_standard_args) CMakeLists.txt:197 (find_package) -- Configuring incomplete, errors occurred! make: *** [obj-i486-linux-gnu/CMakeCache.txt] Error 1 Full build log at https://buildd.debian.org/status/fetch.php?pkg=dolfin&arch=kfreebsd-amd64&ver=1.0.0-7&stamp=1340963024 Regards Christoph -- 9FED 5C6C E206 B70A 5857 70CA 9655 22B9 D49A E731 Debian Developer | Lisp Hacker | CaCert Assurer From noreply at release.debian.org Sun Jul 1 16:39:18 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sun, 01 Jul 2012 16:39:18 +0000 Subject: scirenderer 0.4.9-1 MIGRATED to testing Message-ID: FYI: The status of the scirenderer source package in Debian's testing distribution has changed. Previous version: 0.4.5-1 Current version: 0.4.9-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From mail156783 at telkomsa.net Sun Jul 1 17:51:21 2012 From: mail156783 at telkomsa.net (MS.RITA MICHEAL) Date: Sun, 1 Jul 2012 19:51:21 +0200 (SAST) Subject: AM INTERESTED ON YOU Message-ID: <1461786411.412330.1341165081407.JavaMail.root@zimbra1-vm1.telkomsa.net> Good afternoon dear,how are you today? i hope you are keeping good. My name is Rita (female),I saw your contact today so, i decided to extend my greetings to you. Presently i can not really specify what prompted my drive to write you but,i did have the mind that you could be a nice person. I have the interest to meet people from out side my country . It is my believe that there are nice people out there who can appreciate the values of friendship. Personaly,i might not be physically beautiful like most ladies in your country but, I think I have the beauty of the mind, which is more valuable to me. Please write me if you can, am single and focus. I wouldn?t say i am good but,will leave that to you to find out with time. As allowing others to access you is a humble act. I will send you my pictures when i receive your yes response. My regards to your family where ever you leave. Your new friend, Rita. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ftpmaster at ftp-master.debian.org Sun Jul 1 18:09:15 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 01 Jul 2012 18:09:15 +0000 Subject: Processing of frog_0.12.15-3_amd64.changes Message-ID: frog_0.12.15-3_amd64.changes uploaded successfully to localhost along with the files: frog_0.12.15-3.dsc frog_0.12.15-3.debian.tar.gz frog_0.12.15-3_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 1 18:17:24 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 01 Jul 2012 18:17:24 +0000 Subject: frog_0.12.15-3_amd64.changes ACCEPTED into unstable Message-ID: Accepted: frog_0.12.15-3.debian.tar.gz to main/f/frog/frog_0.12.15-3.debian.tar.gz frog_0.12.15-3.dsc to main/f/frog/frog_0.12.15-3.dsc frog_0.12.15-3_amd64.deb to main/f/frog/frog_0.12.15-3_amd64.deb Changes: frog (0.12.15-3) unstable; urgency=low . * Since libucto1-dev 0.5.2-2 and libfolia1-dev 0.9-2 are in sid, frog no longer FTBFS with unsatisfiable build-dependencies: libucto1-dev (>= 0.4.9), libfolia1-dev (>= 0.5). Thanks Lucas Nussbaum. (Closes: 676768) * Rebuild in clean sid chroot in order to fix bogus linking against obsolete libpython2.6. Thanks Julien Cristau. Override entries for your package: frog_0.12.15-3.dsc - source science frog_0.12.15-3_amd64.deb - extra science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 676768 Thank you for your contribution to Debian. From owner at bugs.debian.org Sun Jul 1 18:18:15 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 01 Jul 2012 18:18:15 +0000 Subject: Bug#676768: marked as done (frog: FTBFS: unsatisfiable build-dependencies: libucto1-dev (>= 0.4.9), libfolia1-dev (>= 0.5)) References: <20120609082300.GA4287@xanadu.blop.info> Message-ID: Your message dated Sun, 01 Jul 2012 18:17:24 +0000 with message-id and subject line Bug#676768: fixed in frog 0.12.15-3 has caused the Debian Bug report #676768, regarding frog: FTBFS: unsatisfiable build-dependencies: libucto1-dev (>= 0.4.9), libfolia1-dev (>= 0.5) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 676768: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=676768 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Lucas Nussbaum Subject: frog: FTBFS: unsatisfiable build-dependencies: libucto1-dev (>= 0.4.9), libfolia1-dev (>= 0.5) Date: Sat, 9 Jun 2012 10:23:00 +0200 Size: 3752 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?q?Joost_van_Baal-Ili=C4=87?= Subject: Bug#676768: fixed in frog 0.12.15-3 Date: Sun, 01 Jul 2012 18:17:24 +0000 Size: 4850 URL: From ftpmaster at ftp-master.debian.org Mon Jul 2 00:41:52 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 02 Jul 2012 00:41:52 +0000 Subject: Processing of openblas_0.2.1-1~exp1_amd64.changes Message-ID: openblas_0.2.1-1~exp1_amd64.changes uploaded successfully to localhost along with the files: openblas_0.2.1-1~exp1.dsc openblas_0.2.1.orig.tar.gz openblas_0.2.1-1~exp1.debian.tar.gz libopenblas-base_0.2.1-1~exp1_amd64.deb libopenblas-dev_0.2.1-1~exp1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Mon Jul 2 00:47:49 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 02 Jul 2012 00:47:49 +0000 Subject: openblas_0.2.1-1~exp1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: libopenblas-base_0.2.1-1~exp1_amd64.deb to main/o/openblas/libopenblas-base_0.2.1-1~exp1_amd64.deb libopenblas-dev_0.2.1-1~exp1_amd64.deb to main/o/openblas/libopenblas-dev_0.2.1-1~exp1_amd64.deb openblas_0.2.1-1~exp1.debian.tar.gz to main/o/openblas/openblas_0.2.1-1~exp1.debian.tar.gz openblas_0.2.1-1~exp1.dsc to main/o/openblas/openblas_0.2.1-1~exp1.dsc openblas_0.2.1.orig.tar.gz to main/o/openblas/openblas_0.2.1.orig.tar.gz Changes: openblas (0.2.1-1~exp1) experimental; urgency=low . * New upstream release Override entries for your package: libopenblas-base_0.2.1-1~exp1_amd64.deb - optional libs libopenblas-dev_0.2.1-1~exp1_amd64.deb - optional libdevel openblas_0.2.1-1~exp1.dsc - source devel Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From christophe.trophime at lncmi.cnrs.fr Mon Jul 2 07:30:00 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Mon, 02 Jul 2012 09:30:00 +0200 Subject: Bug#679589: code-aster-gui: fails to install In-Reply-To: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <1341214200.633.17.camel@calcul8.lcmi.local> code-aster fails to install because dpkg-architecture could not find gcc. To fix the issue I think I have only to add gcc to Depends... but should it already be installed as it is required to get dpkg-architecture working? In other word is this really a code-aster-gui bug?? > + tr [:lower:] [:upper:] > sh: 1: gcc: not found > dpkg-architecture: warning: Couldn't determine gcc system type, > falling back to default (native compilation) > + DEB_HOST_ARCH_OS=LINUX > + dpkg-architecture -qDEB_HOST_ARCH_BITS > sh: 1: gcc: not found > dpkg-architecture: warning: Couldn't determine gcc system type, > falling back to default (native compilation) > + DEB_HOST_ARCH_BITS=64 > > From christophe.trophime at lncmi.cnrs.fr Mon Jul 2 07:30:00 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Mon, 02 Jul 2012 09:30:00 +0200 Subject: Bug#679589: code-aster-gui: fails to install In-Reply-To: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <1341214200.633.17.camel@calcul8.lcmi.local> code-aster fails to install because dpkg-architecture could not find gcc. To fix the issue I think I have only to add gcc to Depends... but should it already be installed as it is required to get dpkg-architecture working? In other word is this really a code-aster-gui bug?? > + tr [:lower:] [:upper:] > sh: 1: gcc: not found > dpkg-architecture: warning: Couldn't determine gcc system type, > falling back to default (native compilation) > + DEB_HOST_ARCH_OS=LINUX > + dpkg-architecture -qDEB_HOST_ARCH_BITS > sh: 1: gcc: not found > dpkg-architecture: warning: Couldn't determine gcc system type, > falling back to default (native compilation) > + DEB_HOST_ARCH_BITS=64 > > From julien.cristau at logilab.fr Mon Jul 2 09:04:18 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Mon, 2 Jul 2012 11:04:18 +0200 Subject: Bug#679589: code-aster-gui: fails to install In-Reply-To: <1341214200.633.17.camel@calcul8.lcmi.local> References: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> <1341214200.633.17.camel@calcul8.lcmi.local> Message-ID: <20120702090416.GB15684@crater2.logilab.fr> On Mon, Jul 2, 2012 at 09:30:00 +0200, trophime wrote: > code-aster fails to install because dpkg-architecture could not find > gcc. To fix the issue I think I have only to add gcc to Depends... but > should it already be installed as it is required to get > dpkg-architecture working? > > In other word is this really a code-aster-gui bug?? > I think the correct fix would be to *not* use dpkg-architecture at install time, i.e. to set the default platform value at build time, where dpkg-dev is available. Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From brlink at debian.org Mon Jul 2 09:12:26 2012 From: brlink at debian.org (Bernhard R. Link) Date: Mon, 2 Jul 2012 11:12:26 +0200 Subject: Bug#679589: code-aster-gui: fails to install In-Reply-To: <1341214200.633.17.camel@calcul8.lcmi.local> References: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> <1341214200.633.17.camel@calcul8.lcmi.local> Message-ID: <20120702091222.GA29587@client.brlink.eu> * trophime [120702 07:30]: > code-aster fails to install because dpkg-architecture could not find > gcc. To fix the issue I think I have only to add gcc to Depends... but > should it already be installed as it is required to get > dpkg-architecture working? dpkg-architecture seems to be working fine (just outputting a warning that the build host type is assumed to be the host type as no gcc is installed). The actual bug is later: + dc_platform= LINUX /var/lib/dpkg/info/code-aster-gui.config: 14: /var/lib/dpkg/info/code-aster-gui.config: LINUX: not found That's related to that part of code-aster-gui.config: if [ "${dc_platform}" = "" ] ; then dc_platform= "${DEB_HOST_ARCH_OS}" && \ db_set astk/platform "${dc_platform}" if [ "${DEB_HOST_ARCH_BITS}" = "64" ] ; then dc_platform= "${DEB_HOST_ARCH_OS}${DEB_HOST_ARCH_BITS}" && \ db_set astk/platform "${dc_platform}" fi fi Note the space after the = in both assignments. That says execute "${DEB_HOST_ARCH_OS}" with dc_platform set to an empty string. And as DEB_HOST_ARCH_OS is LINUX and there is command named this way it fails. Bernhard R. Link From vbkaisetsu at gmail.com Mon Jul 2 09:57:10 2012 From: vbkaisetsu at gmail.com (Koichi Akabe) Date: Mon, 2 Jul 2012 18:57:10 +0900 Subject: Comments regarding ceres-solver_1.1.1-1_amd64.changes In-Reply-To: References: Message-ID: <20120702185710.db6c7c35f48ffe3f2526787a@gmail.com> Hi, I tried building it, but it's failed to build now. The upstream released some versions 1.2.0, 1.2.1, ... 1.2.3, and thay are built correctly but failed to run many tests. I couldn't find the reason why they are failed. So, can I drop the package until it's fixed? On Sat, 30 Jun 2012 07:17:52 +0000 Luca Falavigna wrote: > Hi, > > Upstream does NOT build a shared library, that is patched in > by the Debian package. This is worrying, because this might easily > lead to a situation where upstream starts to reuse sonames. > > And there's usually a reason why upstream does not ship shared > libraries. Could you get back to us about this point? > > Cheers, > Luca > > Best regards, -- Koichi Akabe vbkaisetsu at {gmail.com, debian.or.jp} From mich_gbagbo at yahoo.co.jp Mon Jul 2 09:55:41 2012 From: mich_gbagbo at yahoo.co.jp (Micheal Gbagbo) Date: Mon, 2 Jul 2012 17:55:41 +0800 (CST) Subject: =?iso-8859-1?Q?Ol=E1=2C?= Message-ID: <1341222941.3823.YahooMailClassic@web92106.mail.cnh.yahoo.com> Ol?, ? Por favor, por mais estranho ou surpreendente contato que isto possa parecer para voc?, como n?s n?o temos atender pessoalmente ou teve algum relacionamento no passado, eu humildemente pe?o que voc? tome devido considera??o de sua import?ncia e imenso benef?cio. No entanto, isto n?o ? obrigat?rio nem vou de qualquer forma obrigar voc? a honra contra a sua vontade. ? Eu sou o Sr. Michael irm?o Gbagbo para o ex-presidente da Costa do Marfim Laurent Gbagbo a assistente pessoal de sua esposa, Sra. Simone Gbagbo, por causa da press?o pol?tica e crise Minha fam?lia est? atualmente enfrentando um problema das Na??es Unidas agora, como resultado do m?s de Novembro Elei??o Presidencial 2010 aqui na Costa do Marfim. Eu decidi honestamente confiar em voc? com a instru??o dada a mim pelo meu irm?o e da esposa depois de sua deten??o, para buscar a coopera??o de uma pessoa neutra e respeit?vel para receber a soma de US $ 20,5 milh?es de d?lares que uma Seguran?a Privada da empresa aqui no Reino Unido foram j? ajudou algu?m a minha fam?lia a apresentar-lo para sua pr?pria seguran?a, eu estou entrando em contato agora com base na confian?a e na confian?a que tenho por voc? para me ajudar neste projeto oportuno e espero que voc? ? sincero e verdadeiro considera??es a esta proposta para permitir-me dar-lhe mais informa??es sobre este Fundo e da disposi??o. Nota: Por favor, mantenha esta proposta como top secret e confidencial at? que seja conclu?do com sucesso, devido ao nosso nome de fam?lia para evitar o confisco do Fundo das Na??es Unidas. ? O seu assistente urgente ? necess?ria ? sua aceita??o para carryout esta transa??o. ? Com os melhores cumprimentos, ? Michael Gbagbo, -------------- next part -------------- An HTML attachment was scrubbed... URL: From joostvb-debian-science at mdcc.cx Mon Jul 2 10:36:31 2012 From: joostvb-debian-science at mdcc.cx (Joost van =?utf-8?Q?Baal-Ili=C4=87?=) Date: Mon, 2 Jul 2012 12:36:31 +0200 Subject: fixed in 0.12.15-3 (was: Re: frog_0.12.14-1_amd64.changes ACCEPTED into unstable) In-Reply-To: <20120627121053.GB26774@crater1.logilab.fr> References: <20120627121053.GB26774@crater1.logilab.fr> Message-ID: <20120702103631.GA16366@beskar.mdcc.cx> On Wed, Jun 27, 2012 at 02:10:53PM +0200, Julien Cristau wrote: > On Sat, Jun 23, 2012 at 04:47:11 +0000, Debian FTP Masters wrote: > > > Accepted: > > frog_0.12.14-1.debian.tar.gz > > to main/f/frog/frog_0.12.14-1.debian.tar.gz > > frog_0.12.14-1.dsc > > to main/f/frog/frog_0.12.14-1.dsc > > frog_0.12.14-1_amd64.deb > > to main/f/frog/frog_0.12.14-1_amd64.deb > > frog_0.12.14.orig.tar.gz > > to main/f/frog/frog_0.12.14.orig.tar.gz > > > > > > Changes: > > frog (0.12.14-1) unstable; urgency=low > > . > > * New Upstream Release > > * debian/control: removed dependency om libssl-dev > > * debian/watch: upload from new location: http://software.ticc.uvt.nl > > > The uploaded package seems to have been built in some weird/broken > environment, and ends up getting linked against libpython2.6. Please > make sure to always build package in an up-to-date and clean sid > environment. And to sanity-check the dependencies... Fixed in frog 0.12.15-3; in unstable now. Thanks! Bye, Joost -- rorate caeli desuper et nubes pluant justum --Isa 45:8 From joostvb-debian-bugs-20120702-1 at mdcc.cx Mon Jul 2 12:35:12 2012 From: joostvb-debian-bugs-20120702-1 at mdcc.cx (Joost van =?UTF-8?Q?Baal-Ili=C4=87?=) Date: Mon, 2 Jul 2012 14:35:12 +0200 Subject: Bug#679913: unblock: frog/0.12.15-3 Message-ID: <20120702123512.GB16366@beskar.mdcc.cx> Package: release.debian.org Severity: normal User: release.debian.org at packages.debian.org Usertags: freeze-exception Hi, Please unblock package frog. Wheezy currently has frog/0.12.9-3. Since frog/0.12.15-3 has new upstream code, with lots of bugfixes, and depends upon the new frogdata package, both me and upstream (Ko van der Sloot) consider this new version much more suitable for inclusion in Debian wheezy. Upstream writes about 0.12.15: Frog can be considered beta software, and, as of 2012-06, is being stabilized. All planned functionality (including a dependency parser, the multi-word chunker, Named Entity Recognition, Chunking and error handling and reporting) has been implemented and tested. The new frogdata package is "architecture: all", it installs about 100 MB of data. Package frog in wheezy (arch: any) installs 70 MB, frog in sid installs 500 kB. The only other change in frog 0.12.9-3 vs 0.12.15-3 is: more strict build dependencies. unblock frog/0.12.15-3 Thanks for your time! Bye, Joost -- Ho Mitakuye Oyasin ? joostvb@{????,ad1810}.com ? http://mdcc.cx/ From christophe.trophime at lncmi.cnrs.fr Mon Jul 2 12:12:59 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Mon, 02 Jul 2012 14:12:59 +0200 Subject: Bug#679689: code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun In-Reply-To: <20120630195537.26660.98641.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120630195537.26660.98641.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <1341231179.633.50.camel@calcul8.lcmi.local> On Sat, 2012-06-30 at 21:55 +0200, Andreas Beckmann wrote: > Package: code-aster-run > Version: 1.10.4-3 > Severity: important > User: debian-qa at lists.debian.org > Usertags: piuparts > > Hi, > > during a test with piuparts I noticed your package left unowned files on > the system after purge, which is a violation of policy 6.8 (or 10.8): > > http://www.debian.org/doc/debian-policy/ch-maintainerscripts.html#s-removedetails > > Filing this as important as having a piuparts clean archive is a release > goal since lenny. > > >From the attached log (scroll to the bottom...): > > 0m51.6s ERROR: FAIL: Package purging left files on system: > /etc/codeaster/ owned by: code-aster-run > /etc/codeaster/asrun not owned > I have no clue how to fix this issue. Do you have any idea or pointers to help me? Best C > > cheers, > > Andreas From christophe.trophime at lncmi.cnrs.fr Mon Jul 2 13:20:12 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Mon, 02 Jul 2012 15:20:12 +0200 Subject: Bug#679689: code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun Message-ID: <1341235212.633.61.camel@calcul8.lcmi.local> Hi, I just simply force the "not owned" and the directory /etc/codeaster to be removed in postrm script and the /etc/codeaster/ ... piuparts no longer complains But I have an issue then. code-aster-gui installs some scripts in /etc/codeaster/astkrc. When purging code-aster-gui unowned files will remain in /etc/codeaster/astkrc. So I remove them and also the astkrc directory. How can I deal with /etc/codeaster then? From christophe.trophime at lncmi.cnrs.fr Mon Jul 2 12:12:59 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Mon, 02 Jul 2012 14:12:59 +0200 Subject: Bug#679689: code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun In-Reply-To: <20120630195537.26660.98641.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120630195537.26660.98641.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <1341231179.633.50.camel@calcul8.lcmi.local> On Sat, 2012-06-30 at 21:55 +0200, Andreas Beckmann wrote: > Package: code-aster-run > Version: 1.10.4-3 > Severity: important > User: debian-qa at lists.debian.org > Usertags: piuparts > > Hi, > > during a test with piuparts I noticed your package left unowned files on > the system after purge, which is a violation of policy 6.8 (or 10.8): > > http://www.debian.org/doc/debian-policy/ch-maintainerscripts.html#s-removedetails > > Filing this as important as having a piuparts clean archive is a release > goal since lenny. > > >From the attached log (scroll to the bottom...): > > 0m51.6s ERROR: FAIL: Package purging left files on system: > /etc/codeaster/ owned by: code-aster-run > /etc/codeaster/asrun not owned > I have no clue how to fix this issue. Do you have any idea or pointers to help me? Best C > > cheers, > > Andreas From paumard at users.sourceforge.net Mon Jul 2 13:39:05 2012 From: paumard at users.sourceforge.net (Thibaut Paumard) Date: Mon, 02 Jul 2012 15:39:05 +0200 Subject: Bug#679919: FTBFS on kfreebsd-i386 and kfreebsd-amd64: "conflicting types for semtimedop" Message-ID: <4FF1A479.8060008@users.sourceforge.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Source: yp-svipc Version: 0.14-1 Severity: wishlist Tags: upstream Hi, This package fails to build from source on kfreebsd-i386 and kfreebsd-amd64: https://buildd.debian.org/status/fetch.php?pkg=yp-svipc&arch=kfreebsd-i386&ver=0.14-1&stamp=1341147980 https://buildd.debian.org/status/fetch.php?pkg=yp-svipc&arch=kfreebsd- amd64&ver=0.14-1&stamp=1341100513 This seems fairly easily fixable (unset the "SVIPC_HACKS" macro on kfreebsd). Note the package has never been built on these architectures. Regards, Thibaut. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk/xpHgACgkQ+37NkUuUiPFE/wCdGILj3ZeEDcexk76IfvzVEYdx Rx0An10zfWp5R6k7ZUOnrPoxaEri1PlX =Lch0 -----END PGP SIGNATURE----- From paumard at users.sourceforge.net Mon Jul 2 14:20:25 2012 From: paumard at users.sourceforge.net (Thibaut Paumard) Date: Mon, 02 Jul 2012 16:20:25 +0200 Subject: Bug#679923: FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) Message-ID: <20120702142025.20038.86953.reportbug@localhost.localdomain> Source: gyoto Version: 0.0.3-1 Severity: wishlist Hi, The build-time test suite fails half way in the test suite on kfreebsd. It looks like dlopen is confused with LD_LIBRARY_PATH=lib:$LD_LIBRARY_PATH but works fine with LD_LIBRARY_PATH=../lib:$LD_LIBRARY_PATH The obvious hack is to deactivate the test suite on kfreebsd. Regards, Thibaut. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- no debconf information From sebastien.villemot at ens.fr Mon Jul 2 14:59:15 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Mon, 02 Jul 2012 14:59:15 +0000 Subject: Bug#679929: libmpich2-dev: missing slave alternative for mpiCC Message-ID: <20120702145915.15700.95300.reportbug@brouzouf.villemot.name> Package: libmpich2-dev Version: 1.4.1-4 Severity: important Dear Maintainer, libmpich2-dev does not provide a slave alternative for mpiCC (note the capitals), contrary to lam4-dev and libopenmpi-dev. This is causing the octave-openmpi-ext package to FTBFS on arches where mpich2 is the default MPI implementation: https://buildd.debian.org/status/package.php?p=octave-openmpi-ext&suite=sid Thanks, $ update-alternatives --display mpi mpi - auto mode link currently points to /usr/lib/openmpi/include /usr/include/lam - priority 30 slave libmpi++.a: /usr/lib/liblam++.a slave libmpi++.so: /usr/lib/liblam++.so slave libmpi.a: /usr/lib/liblam.a slave libmpi.so: /usr/lib/liblam.so slave libmpio.a: /usr/lib/liblamio.a slave libmpio.so: /usr/lib/liblamio.so slave mpiCC: /usr/bin/mpic++.lam slave mpiCC.1.gz: /usr/share/man/man1/mpiCC.lam.1.gz slave mpic++: /usr/bin/mpic++.lam slave mpic++.1.gz: /usr/share/man/man1/mpic++.lam.1.gz slave mpicc: /usr/bin/mpicc.lam slave mpicc.1.gz: /usr/share/man/man1/mpicc.lam.1.gz slave mpif77: /usr/bin/mpif77.lam slave mpif77.1.gz: /usr/share/man/man1/mpif77.lam.1.gz /usr/include/mpich2 - priority 40 slave libmpi++.so: /usr/lib/libmpichcxx.so slave libmpi.so: /usr/lib/libmpich.so slave libmpif77.so: /usr/lib/libfmpich.so slave libmpif90.so: /usr/lib/libmpichf90.so slave mpic++: /usr/bin/mpic++.mpich2 slave mpic++.1.gz: /usr/share/man/man1/mpic++.mpich2.1.gz slave mpicc: /usr/bin/mpicc.mpich2 slave mpicc.1.gz: /usr/share/man/man1/mpicc.mpich2.1.gz slave mpicxx: /usr/bin/mpicxx.mpich2 slave mpicxx.1.gz: /usr/share/man/man1/mpicxx.mpich2.1.gz slave mpif77: /usr/bin/mpif77.mpich2 slave mpif77.1.gz: /usr/share/man/man1/mpif77.mpich2.1.gz slave mpif90: /usr/bin/mpif90.mpich2 slave mpif90.1.gz: /usr/share/man/man1/mpif90.mpich2.1.gz /usr/lib/openmpi/include - priority 40 slave libmpi++.so: /usr/lib/openmpi/lib/libmpi_cxx.so slave libmpi.so: /usr/lib/openmpi/lib/libmpi.so slave libmpif77.so: /usr/lib/openmpi/lib/libmpi_f77.so slave libmpif90.so: /usr/lib/openmpi/lib/libmpi_f90.so slave mpiCC: /usr/bin/mpic++.openmpi slave mpiCC.1.gz: /usr/share/man/man1/mpiCC.openmpi.1.gz slave mpic++: /usr/bin/mpic++.openmpi slave mpic++.1.gz: /usr/share/man/man1/mpic++.openmpi.1.gz slave mpicc: /usr/bin/mpicc.openmpi slave mpicc.1.gz: /usr/share/man/man1/mpicc.openmpi.1.gz slave mpicxx: /usr/bin/mpic++.openmpi slave mpicxx.1.gz: /usr/share/man/man1/mpicxx.openmpi.1.gz slave mpif77: /usr/bin/mpif77.openmpi slave mpif77.1.gz: /usr/share/man/man1/mpif77.openmpi.1.gz slave mpif90: /usr/bin/mpif90.openmpi slave mpif90.1.gz: /usr/share/man/man1/mpif90.openmpi.1.gz Current 'best' version is '/usr/include/mpich2'. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libmpich2-dev depends on: ii libc6 2.13-34 ii libcr-dev 0.8.4-2 ii libcr0 0.8.4-2 ii libmpich2-3 1.4.1-4 Versions of packages libmpich2-dev recommends: ii mpich2 1.4.1-4 libmpich2-dev suggests no packages. -- no debconf information From nissan370zreviews at gmail.com Mon Jul 2 15:47:46 2012 From: nissan370zreviews at gmail.com (Nissan Reviews) Date: Mon, 2 Jul 2012 16:47:46 +0100 Subject: website idea Message-ID: Hi there, I've just launched a website called Nissan 370z Reviews with the hope of giving potential 370z owners access to unbiased reviews written by normal people. I'm a massive fan of the 370z as you can probably tell! This is a completely free resource and always will be. I was just wondering if this would be of any value to your website visitors and if so would you link to it please :-) If you would like a reciprocal link this can be arranged too. If you feel this is something you can help me with please use the following HTML.

Nissan 370z Reviews - Nissan 370z Reviews written by people like you!

Thanks, Jamie -------------- next part -------------- An HTML attachment was scrubbed... URL: From julien.cristau at logilab.fr Mon Jul 2 15:56:31 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Mon, 2 Jul 2012 17:56:31 +0200 Subject: Bug#679689: code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun In-Reply-To: <1341235212.633.61.camel@calcul8.lcmi.local> References: <1341235212.633.61.camel@calcul8.lcmi.local> Message-ID: <20120702155631.GA328@crater2.logilab.fr> On Mon, Jul 2, 2012 at 15:20:12 +0200, trophime wrote: > Hi, > I just simply force the "not owned" and the directory /etc/codeaster > to be removed in postrm script and the /etc/codeaster/ ... piuparts no > longer complains > > But I have an issue then. code-aster-gui installs some scripts in > /etc/codeaster/astkrc. When purging code-aster-gui unowned files > will remain in /etc/codeaster/astkrc. So I remove them and also the > astkrc directory. How can I deal with /etc/codeaster then? > Something like this in postrm purge? rm -f /etc/codeaster/astkrc/foo /etc/codeaster/astkrc/bar rmdir -p /etc/codeaster/astkrc || : Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From noreply at release.debian.org Mon Jul 2 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 02 Jul 2012 16:39:15 +0000 Subject: lhapdf 5.8.7+repack-1 MIGRATED to testing Message-ID: FYI: The status of the lhapdf source package in Debian's testing distribution has changed. Previous version: 5.8.7-2 Current version: 5.8.7+repack-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 2 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 02 Jul 2012 16:39:14 +0000 Subject: cpl 6.1.1-2 MIGRATED to testing Message-ID: FYI: The status of the cpl source package in Debian's testing distribution has changed. Previous version: 5.3.1-1 Current version: 6.1.1-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 2 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 02 Jul 2012 16:39:15 +0000 Subject: metis-edf 4.1-2-3 MIGRATED to testing Message-ID: FYI: The status of the metis-edf source package in Debian's testing distribution has changed. Previous version: 4.1-2-2 Current version: 4.1-2-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 2 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 02 Jul 2012 16:39:14 +0000 Subject: givaro 3.7.0-2 MIGRATED to testing Message-ID: FYI: The status of the givaro source package in Debian's testing distribution has changed. Previous version: 3.2.13-1.3 Current version: 3.7.0-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 2 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 02 Jul 2012 16:39:14 +0000 Subject: esorex 3.9.6-1 MIGRATED to testing Message-ID: FYI: The status of the esorex source package in Debian's testing distribution has changed. Previous version: 3.9.0-1 Current version: 3.9.6-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From owner at bugs.debian.org Mon Jul 2 22:51:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 02 Jul 2012 22:51:06 +0000 Subject: Processed: severity of 640004 is important References: <1341269199-2284-bts-biebl@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > severity 640004 important Bug #640004 [libgtkdatabox] package ftbfs when warning about implicitly converted to pointer Ignoring request to change severity of Bug 640004 to the same value. > thanks Stopping processing here. Please contact me if you need assistance. -- 640004: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=640004 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Tue Jul 3 00:00:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 03 Jul 2012 00:00:04 +0000 Subject: Processed: tagging 667168 References: <20120702235755.EF9147FDE@luknote> Message-ID: Processing commands for control at bugs.debian.org: > tags 667168 - sid wheezy Bug #667168 {Done: Matthias Klose } [fparser] fparser: ftbfs with GCC-4.7 Removed tag(s) sid and wheezy. > thanks Stopping processing here. Please contact me if you need assistance. -- 667168: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=667168 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From lizzyfalli at yahoo.ie Tue Jul 3 02:00:08 2012 From: lizzyfalli at yahoo.ie (lizzyfaaa5236) Date: Tue, 3 Jul 2012 04:00:08 +0200 (CEST) Subject: Hello Message-ID: <9511590.841911341280808569.JavaMail.defaultUser@defaultHost> Hello , My Name is Lizzy From ftpmaster at ftp-master.debian.org Tue Jul 3 02:15:53 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 03 Jul 2012 02:15:53 +0000 Subject: Processing of librecad_2.0.0~alpha4+nolibs-1_i386.changes Message-ID: librecad_2.0.0~alpha4+nolibs-1_i386.changes uploaded successfully to localhost along with the files: librecad_2.0.0~alpha4+nolibs-1.dsc librecad_2.0.0~alpha4+nolibs.orig.tar.gz librecad_2.0.0~alpha4+nolibs-1.debian.tar.gz librecad_2.0.0~alpha4+nolibs-1_i386.deb librecad-data_2.0.0~alpha4+nolibs-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 3 02:48:03 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 03 Jul 2012 02:48:03 +0000 Subject: librecad_2.0.0~alpha4+nolibs-1_i386.changes ACCEPTED into experimental Message-ID: Accepted: librecad-data_2.0.0~alpha4+nolibs-1_all.deb to main/libr/librecad/librecad-data_2.0.0~alpha4+nolibs-1_all.deb librecad_2.0.0~alpha4+nolibs-1.debian.tar.gz to main/libr/librecad/librecad_2.0.0~alpha4+nolibs-1.debian.tar.gz librecad_2.0.0~alpha4+nolibs-1.dsc to main/libr/librecad/librecad_2.0.0~alpha4+nolibs-1.dsc librecad_2.0.0~alpha4+nolibs-1_i386.deb to main/libr/librecad/librecad_2.0.0~alpha4+nolibs-1_i386.deb librecad_2.0.0~alpha4+nolibs.orig.tar.gz to main/libr/librecad/librecad_2.0.0~alpha4+nolibs.orig.tar.gz Changes: librecad (2.0.0~alpha4+nolibs-1) experimental; urgency=low . * Enabled build hardening through dh_auto_configure * New upstream release Override entries for your package: librecad-data_2.0.0~alpha4+nolibs-1_all.deb - optional graphics librecad_2.0.0~alpha4+nolibs-1.dsc - source graphics librecad_2.0.0~alpha4+nolibs-1_i386.deb - optional graphics Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From 003lilian at att.net Tue Jul 3 03:48:33 2012 From: 003lilian at att.net (lilian habimana) Date: Mon, 2 Jul 2012 20:48:33 -0700 (PDT) Subject: hi Message-ID: <1341287313.23125.YahooMailClassic@web181404.mail.ne1.yahoo.com> Hello Dear, Interested in you My name is Lilian am a beautiful young girl with full of love Well it gives me joy to contact you for a true love friendship can we become friends if you don't mind? Please Reply me so that i will introduce myself and also send my picture to you, Miss Lilian. -------------- next part -------------- An HTML attachment was scrubbed... URL: From info at alcedoambiente.com Tue Jul 3 07:37:09 2012 From: info at alcedoambiente.com (WEB ADMINISTRATOR) Date: Tue, 3 Jul 2012 09:37:09 +0200 (CEST) Subject: WARNING ATTENTION Message-ID: <59760.197.255.169.254.1341301029.squirrel@webmail.fidal.it> Dear Email User, Your mailbox has exceeded its limit; your webmail is currently running 99.7% of its Quota limit of 100%. You cannot send or receive email properly until you have updated your webmail account. To update your webmail account, click on the link below and paste in your browser to request for upgrade. http://bonaenovae.org/signup/use/editor/form1.html We are sincerely sorry for any inconvenience this might cause you; we tend to serve you better. Thanks for your co-operation. Webmail Update Team. From dima at minignu.minidns.net Tue Jul 3 14:12:41 2012 From: dima at minignu.minidns.net (Dima Sorkin) Date: Tue, 03 Jul 2012 17:12:41 +0300 Subject: Bug#680096: libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Message-ID: <20120703141241.22282.52334.reportbug@minignu.minidns.net> Package: libblas3 Version: 1.2.20110419-3 Severity: normal The following simple testcase ------------- $ cat try_dgemm.f90 program try_dgemm ! -*-fortran-*- integer, parameter :: N = 20 double precision, dimension(N,N) :: A, B, C call dgemm( 'N', 'N', N, N, N, 1.0, A, N, B, N, 0.0, C, N) end program try_dgemm ------------- fails to run when linked with a shared BLAS library. Each of the following cases gfortran -o try_dgemm -ggdb -pedantic -Wall try_dgemm.f90 -lblas gfortran -o try_dgemm -ggdb -pedantic -Wall try_dgemm.f90 /usr/lib/libblas/libblas.so gfortran -o try_dgemm -ggdb -pedantic -Wall try_dgemm.f90 /usr/lib/atlas-base/atlas/libblas.so gfortran -o try_dgemm -ggdb -pedantic -Wall try_dgemm.f90 /usr/lib/libblas.so will fail: -------------------------------- $ ./try_dgemm GNU gdb (GDB) 7.4.1-debian Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "powerpc-linux-gnu". For bug reporting instructions, please see: ... Reading symbols from /home/dima/Desktop/fortran/try_dgemm...done. (gdb) run Starting program: /home/dima/Desktop/fortran/try_dgemm [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/powerpc-linux-gnu/libthread_db.so.1". Program received signal SIGILL, Illegal instruction. 0x0fc7f55c in ATL_dptgemm_nt () from /usr/lib/libblas.so.3 (gdb) ---------------------------------- However statically linking it: gfortran -o try_dgemm -ggdb -pedantic -Wall try_dgemm.f90 /usr/lib/libblas.a will produce an executable that runs ok. Thanks, regards, Dima. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc) Kernel: Linux 3.2.0-2-powerpc Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libblas3 depends on: ii libc6 2.13-33 ii libgcc1 1:4.7.1-2 ii libgfortran3 4.7.1-2 libblas3 recommends no packages. libblas3 suggests no packages. -- no debconf information From sebastien.villemot at ens.fr Tue Jul 3 14:19:18 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Tue, 03 Jul 2012 16:19:18 +0200 Subject: Bug#679929: libmpich2-dev: missing slave alternative for mpiCC In-Reply-To: <20120702145915.15700.95300.reportbug@brouzouf.villemot.name> ("=?UTF-8?Q?S=C3=A9bastien?= Villemot"'s message of "Mon, 02 Jul 2012 14:59:15 +0000") References: <20120702145915.15700.95300.reportbug@brouzouf.villemot.name> Message-ID: <87y5n17wrd.fsf@kalki.villemot.name> severity 679929 normal thanks S?bastien Villemot writes: > libmpich2-dev does not provide a slave alternative for mpiCC (note the > capitals), contrary to lam4-dev and libopenmpi-dev. > > This is causing the octave-openmpi-ext package to FTBFS on arches where mpich2 > is the default MPI implementation: After further investigation, it turns out that octave-openmpi-ext is not compatible with mpich2 (but only with openmpi), so the impact of the present bug is lower than initially thought. Lowering the severity as a consequence. -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From owner at bugs.debian.org Tue Jul 3 14:21:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 03 Jul 2012 14:21:07 +0000 Subject: Processed: Re: Bug#679929: libmpich2-dev: missing slave alternative for mpiCC References: <87y5n17wrd.fsf@kalki.villemot.name> Message-ID: Processing commands for control at bugs.debian.org: > severity 679929 normal Bug #679929 [libmpich2-dev] libmpich2-dev: missing slave alternative for mpiCC Severity set to 'normal' from 'important' > thanks Stopping processing here. Please contact me if you need assistance. -- 679929: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679929 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From sebastien.villemot at ens.fr Tue Jul 3 14:36:44 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Tue, 03 Jul 2012 16:36:44 +0200 Subject: Bug#680096: libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc In-Reply-To: <20120703141241.22282.52334.reportbug@minignu.minidns.net> (Dima Sorkin's message of "Tue, 03 Jul 2012 17:12:41 +0300") References: <20120703141241.22282.52334.reportbug@minignu.minidns.net> Message-ID: <87txxo9air.fsf@kalki.villemot.name> reassign 680096 libatlas3-base tags 680096 + moreinfo thanks Dima Sorkin writes: > $ ./try_dgemm [...] > Program received signal SIGILL, Illegal instruction. > 0x0fc7f55c in ATL_dptgemm_nt () from /usr/lib/libblas.so.3 The crash actually occurs in Atlas (package libatlas3-base), not in RefBLAS (package libblas3). Please check that the crash disappears if you select RefBLAS using the alternative system: # update-alternatives --config libblas.so.3 In order to investigate this bug, I would like you to do two other things: - dump the contents of your /proc/cpuinfo - recompile locally an Atlas package (as documented in README.Debian of libatlas3-base), and check whether the resulting package still exhibits the bug (don't forget to make sure that the BLAS alternative points to Altas before making the test) Thanks, -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From owner at bugs.debian.org Tue Jul 3 14:39:17 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 03 Jul 2012 14:39:17 +0000 Subject: Processed: Re: Bug#680096: libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc References: <87txxo9air.fsf@kalki.villemot.name> Message-ID: Processing commands for control at bugs.debian.org: > reassign 680096 libatlas3-base Bug #680096 [libblas3] libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Bug reassigned from package 'libblas3' to 'libatlas3-base'. No longer marked as found in versions blas/1.2.20110419-3. Ignoring request to alter fixed versions of bug #680096 to the same values previously set > tags 680096 + moreinfo Bug #680096 [libatlas3-base] libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Added tag(s) moreinfo. > thanks Stopping processing here. Please contact me if you need assistance. -- 680096: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680096 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From noreply at release.debian.org Tue Jul 3 16:39:16 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 03 Jul 2012 16:39:16 +0000 Subject: python-cpl 0.3.6-1 MIGRATED to testing Message-ID: FYI: The status of the python-cpl source package in Debian's testing distribution has changed. Previous version: 0.3.5.1-1 Current version: 0.3.6-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 3 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 03 Jul 2012 16:39:15 +0000 Subject: libfolia 0.9-2 MIGRATED to testing Message-ID: FYI: The status of the libfolia source package in Debian's testing distribution has changed. Previous version: 0.6-1 Current version: 0.9-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 3 16:39:16 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 03 Jul 2012 16:39:16 +0000 Subject: ucto 0.5.2-2 MIGRATED to testing Message-ID: FYI: The status of the ucto source package in Debian's testing distribution has changed. Previous version: 0.5.0-1 Current version: 0.5.2-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From dktrkranz at debian.org Tue Jul 3 21:36:15 2012 From: dktrkranz at debian.org (Luca Falavigna) Date: Tue, 3 Jul 2012 23:36:15 +0200 Subject: Comments regarding ceres-solver_1.1.1-1_amd64.changes In-Reply-To: <20120702185710.db6c7c35f48ffe3f2526787a@gmail.com> References: <20120702185710.db6c7c35f48ffe3f2526787a@gmail.com> Message-ID: 2012/7/2 Koichi Akabe : > So, can I drop the package until it's fixed? That would be preferable, at least for now. From debian at liska.ath.cx Wed Jul 4 10:08:29 2012 From: debian at liska.ath.cx (Ole Streicher) Date: Wed, 04 Jul 2012 12:08:29 +0200 Subject: Bug#677968: [DFS11732] - CPL - Segmentation faults in tests. In-Reply-To: <14014957.1340025490176.JavaMail.remedy@remgar.hq.eso.org> References: <14014957.1340025490176.JavaMail.remedy@remgar.hq.eso.org> Message-ID: <4FF4161D.40307@liska.ath.cx> I investigated this a bit more for cpl_mast_test. The cause of the error is a pointer misalignment in several cpl_mask structure (and probaly elsewhere). cpl_mask.c contains lines like (cpl_mask.c, line 513, for the 2_2 case): #define CPL_MASK_FILTER_WORD \ self[i] = \ [...] (OPERATE_WORD(*(const size_t*)(other + i + nx )) & kernelw[2]) [...] "other" (the data pointer in a mask) is a "const cpl_binary *", with sizeof(cpl_binary)==1. "nx" is one dimension of the mask; an arbitrary value which is in the test set to 21. "i" may be set to 2. "other" is well-aligned to 2 bytes; "other + i + nx" is it therefore *not*. Trying to dereference this as a "size_t" pointer fails on machines that are sensitive to misaligned data, where Sparc is an example. The problem is, however, not limited to Sparc processors. On other machines (x86_64), it may lead to significant performance decrease. This code will also create a rollover on the borders of the "other" mask: each code line (as the one shown above) shall obviously be limited to one mask line which has a length of nx == 21. CPL_MASK_FILTER_WORD, however runs for i=2 to istop (cpl_mask_body.h:109), with istop set to 19. So, with sizeof(size_t)==4, for the last i the code already takes the next mask line! I would consider this code part as *buggy* even if it may run on occasionally platforms. It also contradicts the C standard [(SO/IEC 9899:2011), section 6.3.2.3, para. 7: A pointer to an object or incomplete type may be converted to a pointer to a different object or incomplete type. If the resulting pointer is not correctly aligned for the pointed-to type, the behavior is undefined. Best regards Ole From auto110 at reliablediag.com Wed Jul 4 11:41:53 2012 From: auto110 at reliablediag.com (auto110) Date: Wed, 4 Jul 2012 19:41:53 +0800 Subject: selling the auto diagnostic tools Message-ID: <2012070417353771866719@reliablediag.com> Dear sir or madam, Glad to hear that you're on the market for Auto Diagnostic Tools.We specialize in this field for several years,with the strength of CAR diagnosis and Truck diagnosis , with good quality and pretty competitive price. Should you have any questions, pls do not hesitate to contact me. Tks& br, Jenny China Century Technology Co., Ltd Tel: +86-7978459933 Fax: +86-7978459833 E-mail: auto110 at reliablediag.com MSN: ccssit.clack at hotmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From dima at minignu.minidns.net Wed Jul 4 12:36:57 2012 From: dima at minignu.minidns.net (Dima) Date: Wed, 04 Jul 2012 15:36:57 +0300 Subject: Bug#680096: libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc In-Reply-To: <87txxo9air.fsf@kalki.villemot.name> Message-ID: <87k3yjhfdi.fsf@minignu.minidns.net> Hi. 1. The RefBLAS make crash disappear. i.e. having $ LANG=C sudo update-alternatives --config libblas.so.3 There are 2 choices for the alternative libblas.so.3 (providing /usr/lib/libblas.so.3). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/atlas-base/atlas/libblas.so.3 35 auto mode 1 /usr/lib/atlas-base/atlas/libblas.so.3 35 manual mode * 2 /usr/lib/libblas/libblas.so.3 10 manual mode makes my small test and also Octave run smoothly. 2. $ cat /proc/cpuinfo processor : 0 cpu : 7447A, altivec supported clock : 1066.666000MHz revision : 1.1 (pvr 8003 0101) bogomips : 73.72 timebase : 18432000 platform : PowerMac model : PowerBook6,5 machine : PowerBook6,5 motherboard : PowerBook6,5 MacRISC3 Power Macintosh detected as : 287 (iBook G4) pmac flags : 0000001b L2 cache : 512K unified pmac-generation : NewWorld Memory : 768 MB 3. Regarding rebuilding ATLAS - it did not success. See below. 1st of all, the following behaviour of ATLAS build makes me curious: When I started building it at CPU frequency governor 'powersave', the below error has occured: $ fakeroot debian/rules custom ... frequency governor on cpu=0 is not set to 'performance' run: 'sudo cpufreq-set -g performance -c cpu#' for each cpu aborting atlas build make: *** [custom-stamp] ?????? 1 I believe this behaviour is wrong, it ought to be a well displayed warning instead. It may make sense that I want to keep my computer always on powersave mode for some limitations, even if heavy numeric computations are about to be run on it. 2nd, even in 'performance' mode, ATLAS did not build, the following error occured and I don't know how is it to be resolved: ... ar r /home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib/libatlas.a ATL_zhemm.o ATL_zher2k.o ATL_zherk.o ATL_zsymm.o ATL_zsyr2k.o ATL_zsyrk.o ATL_ztrmm.o ATL_ztrsm.o echo /home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib/libatlas.a /home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib/libatlas.a touch zblas3.grd make[6]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/src/blas/level3' make[5]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/src/blas/level3' make[4]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/bin' done. ATLAS install complete. Examine ATLAS/bin//INSTALL_LOG/SUMMARY.LOG for details. cd lib/ ; /usr/bin/make atlas/libblas.a make[4]: Entering directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib' make[4]: *** No rule to make target `libptf77blas.a', needed by `atlas/libblas.a'. Stop. make[4]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib' make[3]: *** [build] Error 2 make[3]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base' make[2]: *** [build] Error 2 make[2]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base' make[1]: *** [build-arch-stamp] Error 2 make[1]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4' make: *** [custom-stamp] ?????? 2 Thanks, regards, Dima. From paumard at users.sourceforge.net Wed Jul 4 13:24:40 2012 From: paumard at users.sourceforge.net (Thibaut Paumard) Date: Wed, 04 Jul 2012 15:24:40 +0200 Subject: Bug#680216: don't rely on yorick to pass the fortified build flags Message-ID: <20120704132440.24978.3071.reportbug@localhost.localdomain> Package: yorick-svipc Version: 0.14-1 Severity: important Hi, Currently, yorick-svipc gets it's build flags from yorick-dev's /usr/share/yorick/Make.cfg. Previous versions of this file (until yorick/2.2.02+dfsg-5) lacked certain flags and in any case it's best to get the right flags directly from dpkg-buildflags. Getting those flags right is a release goal, hence the important severity. Regards, Thibaut. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages yorick-svipc depends on: ii libc6 2.13-33 ii yorick 2.2.02+dfsg-5 yorick-svipc recommends no packages. Versions of packages yorick-svipc suggests: pn python-svipc pn python3-svipc -- no debconf information From picca at synchrotron-soleil.Fr Wed Jul 4 15:38:41 2012 From: picca at synchrotron-soleil.Fr (Picca =?UTF-8?Q?Fr=C3=A9d=C3=A9ric-Emmanuel?=) Date: Wed, 4 Jul 2012 17:38:41 +0200 Subject: Bug#678339: [spyder] Error message in internal console when saving file In-Reply-To: <20120621002352.1e3223dd@Fuddel> References: <20120621002352.1e3223dd@Fuddel> Message-ID: <20120704173841.633a7984@synchrotron-soleil.fr> On Thu, 21 Jun 2012 00:23:52 +0200 Martin Manns wrote: Hello Martin can you look at here[1] and answer the questions of the upstream If you do not have a gmail account I can forward you explainations. thanks Frederic [1] http://code.google.com/p/spyderlib/issues/detail?id=1098 -- GPG public key 4096R/4696E015 2011-02-14 fingerprint = E92E 7E6E 9E9D A6B1 AA31 39DC 5632 906F 4696 E015 uid Picca Fr?d?ric-Emmanuel GPG public key 1024D/A59B1171 2009-08-11 fingerprint = 1688 A3D6 F0BD E4DF 2E6B 06AA B6A9 BA6A A59B 1171 uid Picca Fr?d?ric-Emmanuel From picca at synchrotron-soleil.Fr Wed Jul 4 15:38:41 2012 From: picca at synchrotron-soleil.Fr (Picca =?UTF-8?Q?Fr=C3=A9d=C3=A9ric-Emmanuel?=) Date: Wed, 4 Jul 2012 17:38:41 +0200 Subject: Bug#678339: [spyder] Error message in internal console when saving file In-Reply-To: <20120621002352.1e3223dd@Fuddel> References: <20120621002352.1e3223dd@Fuddel> Message-ID: <20120704173841.633a7984@synchrotron-soleil.fr> On Thu, 21 Jun 2012 00:23:52 +0200 Martin Manns wrote: Hello Martin can you look at here[1] and answer the questions of the upstream If you do not have a gmail account I can forward you explainations. thanks Frederic [1] http://code.google.com/p/spyderlib/issues/detail?id=1098 -- GPG public key 4096R/4696E015 2011-02-14 fingerprint = E92E 7E6E 9E9D A6B1 AA31 39DC 5632 906F 4696 E015 uid Picca Fr?d?ric-Emmanuel GPG public key 1024D/A59B1171 2009-08-11 fingerprint = 1688 A3D6 F0BD E4DF 2E6B 06AA B6A9 BA6A A59B 1171 uid Picca Fr?d?ric-Emmanuel From paumard at users.sourceforge.net Wed Jul 4 15:06:14 2012 From: paumard at users.sourceforge.net (Thibaut Paumard) Date: Wed, 04 Jul 2012 17:06:14 +0200 Subject: Bug#680242: don't rely on yorick to pass the fortified build flags Message-ID: <20120704150614.17502.27911.reportbug@localhost.localdomain> Package: yorick-gyoto Version: 0.0.3-1 Severity: important Hi, Currently, yorick-gyoto gets its build flags from yorick-dev's /usr/share/yorick/Make.cfg. Previous versions of this file (until yorick/2.2.02+dfsg-5) lacked certain flags and in any case it's best to get the right flags directly from dpkg-buildflags. Getting those flags right is a release goal, hence the important severity. Regards, Thibaut. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages yorick-gyoto depends on: ii libc6 2.13-33 ii libcfitsio3 3.300-2 ii libgcc1 1:4.7.1-2 ii libgyoto0 0.0.3-1 ii libstdc++6 4.7.1-2 ii libxerces-c3.1 3.1.1-2 ii python 2.7.3-1 ii python-glade2 2.24.0-3 ii yorick 2.2.02+dfsg-5 ii yorick-yutils 1.5.0-1 yorick-gyoto recommends no packages. yorick-gyoto suggests no packages. -- no debconf information From sebastien.villemot at ens.fr Wed Jul 4 16:49:02 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Wed, 04 Jul 2012 18:49:02 +0200 Subject: Bug#680096: libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc In-Reply-To: <87k3yjhfdi.fsf@minignu.minidns.net> (dima@minignu.minidns.net's message of "Wed, 04 Jul 2012 15:36:57 +0300") References: <87k3yjhfdi.fsf@minignu.minidns.net> Message-ID: <87pq8bxyip.fsf@brouzouf.villemot.name> tags 680096 - moreinfo severity 680096 important found 680096 3.8.4-7 thanks Dima writes: > 2. $ cat /proc/cpuinfo > processor : 0 > cpu : 7447A, altivec supported > clock : 1066.666000MHz You have a G4 and the atlas binary currently in Wheezy requires a G5. This is definitely a bug in the package and hopefully I am going to fix it. > 2nd, even in 'performance' mode, ATLAS did not build, the following > error occured and I don't know how is it to be resolved: > > ... > ar r /home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib/libatlas.a ATL_zhemm.o ATL_zher2k.o ATL_zherk.o ATL_zsymm.o ATL_zsyr2k.o ATL_zsyrk.o ATL_ztrmm.o ATL_ztrsm.o > echo /home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib/libatlas.a > /home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib/libatlas.a > touch zblas3.grd > make[6]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/src/blas/level3' > make[5]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/src/blas/level3' > make[4]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/bin' > done. > > > ATLAS install complete. Examine > ATLAS/bin//INSTALL_LOG/SUMMARY.LOG for details. > cd lib/ ; /usr/bin/make atlas/libblas.a > make[4]: Entering directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib' > make[4]: *** No rule to make target `libptf77blas.a', needed by `atlas/libblas.a'. Stop. > make[4]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base/lib' > make[3]: *** [build] Error 2 > make[3]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base' > make[2]: *** [build] Error 2 > make[2]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4/build/atlas-base' > make[1]: *** [build-arch-stamp] Error 2 > make[1]: Leaving directory `/home/dima/atlas-build/atlas-3.8.4' > make: *** [custom-stamp] ?????? 2 I think you've hit #602524, which is a separate issue. Thanks for your feedback, -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From owner at bugs.debian.org Wed Jul 4 16:51:10 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 04 Jul 2012 16:51:10 +0000 Subject: Processed: Re: Bug#680096: libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc References: <87pq8bxyip.fsf@brouzouf.villemot.name> Message-ID: Processing commands for control at bugs.debian.org: > tags 680096 - moreinfo Bug #680096 [libatlas3-base] libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Removed tag(s) moreinfo. > severity 680096 important Bug #680096 [libatlas3-base] libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Severity set to 'important' from 'normal' > found 680096 3.8.4-7 Bug #680096 [libatlas3-base] libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Marked as found in versions atlas/3.8.4-7. > thanks Stopping processing here. Please contact me if you need assistance. -- 680096: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680096 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Wed Jul 4 16:51:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 04 Jul 2012 16:51:13 +0000 Subject: Processed: Re: Bug#679632: gimp: Gimp crashes with OpenBlas References: <4FF4741D.4050307@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > reassign 679632 libopenblas-base Bug #679632 [gimp] gimp: Gimp crashes with OpenBlas Bug reassigned from package 'gimp' to 'libopenblas-base'. No longer marked as found in versions gimp/2.8.0-2. Ignoring request to alter fixed versions of bug #679632 to the same values previously set > End of message, stopping processing here. Please contact me if you need assistance. -- 679632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679632 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Wed Jul 4 16:57:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 04 Jul 2012 16:57:13 +0000 Subject: Processed: forcibly merging 673061 679632 References: <1341420920-2941-bts-sebastien.villemot@ens.fr> Message-ID: Processing commands for control at bugs.debian.org: > forcemerge 673061 679632 Bug #673061 [libopenblas-base] gimp: segfaults on startup if libopenblas-base is installed Bug #675903 [libopenblas-base] Segfault at startup Bug #679632 [libopenblas-base] gimp: Gimp crashes with OpenBlas Severity set to 'important' from 'normal' Added indication that 679632 affects gimp Marked as found in versions openblas/0.1.1-4. Added tag(s) confirmed. Bug #675903 [libopenblas-base] Segfault at startup Merged 673061 675903 679632 > thanks Stopping processing here. Please contact me if you need assistance. -- 673061: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673061 675903: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675903 679632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679632 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From sebastien.villemot at ens.fr Wed Jul 4 17:26:00 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Wed, 04 Jul 2012 19:26:00 +0200 Subject: Bug#680096: ATLAS on PowerPC Message-ID: <87liizxwt3.fsf@brouzouf.villemot.name> [please keep the bug in Cc:, I?m not subscribed to the list] Dear PowerPC porters, As a co-maintainer of atlas, I intend to force a specific PowerPC CPU architecture when the package is built on buildds (in order to fix #680096). Atlas gives me the following options: POWER3, POWER4, POWER5, POWER6, POWER7, PPCG4, PPCG5. I would like to know which one of these is the most generic architecture, so that the atlas package thus modified will work on all supported machines. I guess this is either POWER3 or PPCG4, but it is unclear to me which one is more generic. Or maybe none of the two encompasses the other, in which case I would like to know which one would be the best choice from your point of view. BTW, if you could answer the same question concerning the ppc64 and powerpcspe ports, that would be great. Thanks a lot, -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From jeroen at nijhof.co.uk Wed Jul 4 17:31:52 2012 From: jeroen at nijhof.co.uk (Jeroen Nijhof) Date: Wed, 04 Jul 2012 19:31:52 +0200 Subject: Bug#296147: closed by Anton Gladky (Closing the bug) In-Reply-To: (owner@bugs.debian.org) Message-ID: <87vci3sa9j.fsf@tux.huis> Hi, Looking again at the help text ('help binary matrix'), there was no bug in the first place -- I thought that for the non-uniform matrix the columns were numbered y1 to yN, so with N columns -- but actually they are numbered y0 to yN -- so N+1 columns. so the number N+1 is correct. From gladky.anton at gmail.com Wed Jul 4 19:23:39 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Wed, 4 Jul 2012 21:23:39 +0200 Subject: Bug#680285: yade fails to build due to ipython 0.13 Message-ID: Package: yade,ipython Version: yade/0.80.1-1 Version: ipython/0.13-1 Severity: serious Hello, newly uploaded ipython 0.13 causes FTBFS during building of yade_0.80.1-1 on the stage of building documentation. Welcome to Yade 0.80.1 WARN: unhandled IPython version 0.13, assuming 0.11 instead. Manual page yade.1 generated. export MPLCONFIGDIR=/tmp/buildd/yade-0.80.1/debian/matplotlib HOME=/tmp/buildd/yade-0.80.1/debian /matplotlib ; YADE_PREFIX=/tmp/buildd/yade-0.80.1/debian/inst /tmp/buildd/yade-0.80.1/debian/inst /bin/yade-batch --generate-manpage yade-batch.1 WARN: unhandled IPython version 0.13, assuming 0.11 instead. Manual page yade-batch.1 generated. make[1]: Leaving directory `/tmp/buildd/yade-0.80.1' debian/rules override_dh_auto_build-indep make[1]: Entering directory `/tmp/buildd/yade-0.80.1' #Generate docs export MPLCONFIGDIR=/tmp/buildd/yade-0.80.1/debian/matplotlib HOME=/tmp/buildd/yade-0.80.1/debian/matplotlib ; cd doc/sphinx; PYTHONPATH=. YADE_PREFIX=/tmp/buildd/yade-0.80.1/debian/inst /tmp/buildd/yade-0.80.1/debian/inst/bin/yade yadeSphinx.py; cd _build/latex; xelatex Yade.tex; xelatex Yade.tex; xelatex Yade.tex; Welcome to Yade 0.80.1 TCP python prompt on localhost:9001, auth cookie `aysuek' WARN: unhandled IPython version 0.13, assuming 0.11 instead. XMLRPC info provider on http://localhost:21001 Running script yadeSphinx.py Running Sphinx v1.1.3 Exception occurred: File "/usr/lib/pymodules/python2.7/sphinx/cmdline.py", line 188, in main warningiserror, tags) File "/usr/lib/pymodules/python2.7/sphinx/application.py", line 102, in __init__ confoverrides or {}, self.tags) File "/usr/lib/pymodules/python2.7/sphinx/config.py", line 216, in __init__ exec code in config File "/tmp/buildd/yade-0.80.1/doc/sphinx/conf.py", line 362, in import ipython_directive as id File "/tmp/buildd/yade-0.80.1/doc/sphinx/ipython_directive.py", line 83, in from IPython.Shell import MatplotlibShell ImportError: No module named Shell The full traceback has been saved in /tmp/sphinx-err-epAq_m.log, if you want to report the issue to the developers. Please also report this if it was a user error, so that a better error message can be provided next time. Either send bugs to the mailing list at , or report them in the tracker at . Thanks! Traceback (most recent call last): File "/tmp/buildd/yade-0.80.1/debian/inst/bin/yade", line 172, in runScript execfile(script,globals()) File "yadeSphinx.py", line 219, in makeBaseClassesClickable((outDir+'/html/yade.wrapper.html' if writer=='html' else outDir+'/latex/Yade.tex'),writer) File "yadeSphinx.py", line 151, in makeBaseClassesClickable for l in open(f): IOError: [Errno 2] No such file or directory: '_build/html/yade.wrapper.html' [[ ^L clears screen, ^U kills line. F8 plot. ]] ^AESC[0;34m^BIn [^AESC[1;34m^B1^AESC[0;34m^B]: ^AESC[0m^B Do you really want to exit ([y]/n)? This is XeTeX, Version 3.1415926-2.4-0.9998 (TeX Live 2012/Debian) restricted \write18 enabled. entering extended mode ! I can't find file `Yade.tex'. <*> Yade.tex From sandals at crustytoothpaste.net Wed Jul 4 19:23:42 2012 From: sandals at crustytoothpaste.net (brian m. carlson) Date: Wed, 4 Jul 2012 19:23:42 +0000 Subject: Bug#680096: ATLAS on PowerPC In-Reply-To: <87liizxwt3.fsf@brouzouf.villemot.name> References: <87liizxwt3.fsf@brouzouf.villemot.name> Message-ID: <20120704192342.GB98820@crustytoothpaste.ath.cx> On Wed, Jul 04, 2012 at 07:26:00PM +0200, S?bastien Villemot wrote: > [please keep the bug in Cc:, I?m not subscribed to the list] > > Dear PowerPC porters, > > As a co-maintainer of atlas, I intend to force a specific PowerPC CPU > architecture when the package is built on buildds (in order to fix > #680096). > > Atlas gives me the following options: POWER3, POWER4, POWER5, POWER6, > POWER7, PPCG4, PPCG5. > > I would like to know which one of these is the most generic > architecture, so that the atlas package thus modified will work on all > supported machines. I guess this is either POWER3 or PPCG4, but it is > unclear to me which one is more generic. Or maybe none of the two > encompasses the other, in which case I would like to know which one > would be the best choice from your point of view. POWER3 is 64-bit. PPCG4 is 32-bit, but it requires the use of Altivec instructions, which G3 processors do not have. So the answer is that neither of these is acceptable by default. For example, neither of these would work on my iBook. Is there a reason that you cannot use the defaults of the compiler? Also, POWER and PowerPC are two very similar architectures. In general, they each have a few instructions that the other does not, but there is a large common subset that is generally what Debian uses. POWER 3 and newer support all of the PowerPC instruction set. However, if you use a POWER setting, you need to be sure that it does not include instructions that only POWER processors have, or it will not work on PowerPC processors. > BTW, if you could answer the same question concerning the ppc64 and > powerpcspe ports, that would be great. I don't know enough here to have an opinion, sorry. -- brian m. carlson / brian with sandals: Houston, Texas, US +1 832 623 2791 | http://www.crustytoothpaste.net/~bmc | My opinion only OpenPGP: RSA v4 4096b: 88AC E9B2 9196 305B A994 7552 F1BA 225C 0223 B187 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: From sebastien.villemot at ens.fr Wed Jul 4 19:39:37 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Wed, 04 Jul 2012 21:39:37 +0200 Subject: Bug#680096: ATLAS on PowerPC In-Reply-To: <20120704192342.GB98820@crustytoothpaste.ath.cx> (brian m. carlson's message of "Wed, 4 Jul 2012 19:23:42 +0000") References: <87liizxwt3.fsf@brouzouf.villemot.name> <20120704192342.GB98820@crustytoothpaste.ath.cx> Message-ID: <87hatnxqme.fsf@brouzouf.villemot.name> "brian m. carlson" writes: > POWER3 is 64-bit. But still POWER3 is supported by the 32-bit powerpc port: http://www.debian.org/releases/stable/powerpc/ch02s01.html.en#id522279 > PPCG4 is 32-bit, but it requires the use of Altivec > instructions, which G3 processors do not have. So the answer is that > neither of these is acceptable by default. My understanding is that POWER3 does not have Altivec, so it may therefore be the best option. > Is there a reason that you cannot use the > defaults of the compiler? Yes, it has to do with the Atlas build system which does CPU detection and timings at compile time, and which is quite intricate (to say the least). -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From chrisreich at rocketmail.com Wed Jul 4 19:45:41 2012 From: chrisreich at rocketmail.com (Chris Reich) Date: Wed, 4 Jul 2012 12:45:41 -0700 (PDT) Subject: Bug#680096: ATLAS on PowerPC In-Reply-To: <87liizxwt3.fsf@brouzouf.villemot.name> References: <87liizxwt3.fsf@brouzouf.villemot.name> Message-ID: <1341431141.6698.YahooMailNeo@web162101.mail.bf1.yahoo.com> Of the options given, PPCG4 is the most non-specific. ________________________________ From: S?bastien Villemot To: debian-powerpc at lists.debian.org Cc: 680096 at bugs.debian.org Sent: Wednesday, July 4, 2012 1:26 PM Subject: ATLAS on PowerPC [please keep the bug in Cc:, I?m not subscribed to the list] Dear PowerPC porters, As a co-maintainer of atlas, I intend to force a specific PowerPC CPU architecture when the package is built on buildds (in order to fix #680096). Atlas gives me the following options: POWER3, POWER4, POWER5, POWER6, POWER7, PPCG4, PPCG5. I would like to know which one of these is the most generic architecture, so that the atlas package thus modified will work on all supported machines. I guess this is either POWER3 or PPCG4, but it is unclear to me which one is more generic. Or maybe none of the two encompasses the other, in which case I would like to know which one would be the best choice from your point of view. BTW, if you could answer the same question concerning the ppc64 and powerpcspe ports, that would be great. Thanks a lot, -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtaylor.debian at googlemail.com Wed Jul 4 19:50:02 2012 From: jtaylor.debian at googlemail.com (Julian Taylor) Date: Wed, 04 Jul 2012 21:50:02 +0200 Subject: Bug#680285: (no subject) Message-ID: <4FF49E6A.8030801@googlemail.com> notfound 680285 ipython/0.13-1 thanks why does jade fall back to 0.10 interface when it encounters a too new version? doc/sphinx/conf.py if yade.runtime.ipython_version<12: import ipython_directive as id else: import ipython_directive012 as id version is set to 11 in runtime.py the sensible approach would be to fall back to the newest interface known. sorry I did not test this before the upload, but 0.13 is api compatible with 0.12 and I did not expect such weirdness. I did not have enough time to test build the rather large yade package. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: From owner at bugs.debian.org Wed Jul 4 19:51:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 04 Jul 2012 19:51:04 +0000 Subject: Processed: your mail References: <4FF49E6A.8030801@googlemail.com> Message-ID: Processing commands for control at bugs.debian.org: > notfound 680285 ipython/0.13-1 Bug #680285 [yade,ipython] yade fails to build due to ipython 0.13 Ignoring request to alter found versions of bug #680285 to the same values previously set > thanks Stopping processing here. Please contact me if you need assistance. -- 680285: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680285 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From gladky.anton at gmail.com Wed Jul 4 19:57:17 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Wed, 4 Jul 2012 21:57:17 +0200 Subject: Processed: your mail In-Reply-To: References: <4FF49E6A.8030801@googlemail.com> Message-ID: Hi Julian, I have fixed that. But if you plan to push ipython_0.13 into wheezy, it should be done together with yade. That is why I marked this bug belonging to ipython as well. Otherwise yade will be broken in Wheezy, Anton 2012/7/4 Debian Bug Tracking System : > Processing commands for control at bugs.debian.org: > >> notfound 680285 ipython/0.13-1 > Bug #680285 [yade,ipython] yade fails to build due to ipython 0.13 > Ignoring request to alter found versions of bug #680285 to the same values previously set >> thanks > Stopping processing here. > > Please contact me if you need assistance. > -- > 680285: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680285 > Debian Bug Tracking System > Contact owner at bugs.debian.org with problems > > -- > debian-science-maintainers mailing list > debian-science-maintainers at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/debian-science-maintainers From jtaylor.debian at googlemail.com Wed Jul 4 20:29:43 2012 From: jtaylor.debian at googlemail.com (Julian Taylor) Date: Wed, 04 Jul 2012 22:29:43 +0200 Subject: Processed: your mail In-Reply-To: References: <4FF49E6A.8030801@googlemail.com> Message-ID: <4FF4A7B7.5090607@googlemail.com> On 07/04/2012 09:57 PM, Anton Gladky wrote: > Hi Julian, > > I have fixed that. But if you plan to push ipython_0.13 into wheezy, > it should be > done together with yade. That is why I marked this bug belonging to > ipython as well. > Otherwise yade will be broken in Wheezy, > please try to get a freeze exception, the fix looks very simple. It would be a shame to not have 0.13 in wheezy due to this minor hiccup. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: From lsorense at csclub.uwaterloo.ca Wed Jul 4 20:53:10 2012 From: lsorense at csclub.uwaterloo.ca (Lennart Sorensen) Date: Wed, 4 Jul 2012 16:53:10 -0400 Subject: Bug#680096: ATLAS on PowerPC In-Reply-To: <87hatnxqme.fsf@brouzouf.villemot.name> References: <87liizxwt3.fsf@brouzouf.villemot.name> <20120704192342.GB98820@crustytoothpaste.ath.cx> <87hatnxqme.fsf@brouzouf.villemot.name> Message-ID: <20120704205310.GA19565@csclub.uwaterloo.ca> On Wed, Jul 04, 2012 at 09:39:37PM +0200, S?bastien Villemot wrote: > But still POWER3 is supported by the 32-bit powerpc port: > > http://www.debian.org/releases/stable/powerpc/ch02s01.html.en#id522279 Debian powerpc is 32bit, but with 64bit kernel available. Debian 64bit powerpc is a new project and not yet anywhere close to a supported port as far as I know. Most code probably doesn't benefit from 64bit on powerpc (it is not like amd64 at all), and would only gain in memory space for applications by going 64bit to my knowledge. > My understanding is that POWER3 does not have Altivec, so it may > therefore be the best option. Unless of course it has other instructions that the G4 doesn't have. > Yes, it has to do with the Atlas build system which does CPU detection > and timings at compile time, and which is quite intricate (to say the > least). It looks like they used to have 604e support, which is about as generic as a powerpc gets (32bit, no altivec, etc). Someone commented it out though. -- Len Sorensen From ftpmaster at ftp-master.debian.org Wed Jul 4 21:10:20 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 04 Jul 2012 21:10:20 +0000 Subject: Processing of yade_0.80.1-2_amd64.changes Message-ID: yade_0.80.1-2_amd64.changes uploaded successfully to localhost along with the files: yade_0.80.1-2.dsc yade_0.80.1-2.debian.tar.gz yade_0.80.1-2_amd64.deb yade-doc_0.80.1-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 4 21:22:53 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 04 Jul 2012 21:22:53 +0000 Subject: yade_0.80.1-2_amd64.changes ACCEPTED into unstable Message-ID: Accepted: yade-doc_0.80.1-2_all.deb to main/y/yade/yade-doc_0.80.1-2_all.deb yade_0.80.1-2.debian.tar.gz to main/y/yade/yade_0.80.1-2.debian.tar.gz yade_0.80.1-2.dsc to main/y/yade/yade_0.80.1-2.dsc yade_0.80.1-2_amd64.deb to main/y/yade/yade_0.80.1-2_amd64.deb Changes: yade (0.80.1-2) unstable; urgency=low . * [9ddf3c4] Handle ipython 0.13. (Closes: #680285) Override entries for your package: yade-doc_0.80.1-2_all.deb - extra doc yade_0.80.1-2.dsc - source science yade_0.80.1-2_amd64.deb - extra science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 680285 Thank you for your contribution to Debian. From owner at bugs.debian.org Wed Jul 4 21:28:00 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 04 Jul 2012 21:28:00 +0000 Subject: Bug#680285: marked as done (yade fails to build due to ipython 0.13) References: Message-ID: Your message dated Wed, 04 Jul 2012 21:22:53 +0000 with message-id and subject line Bug#680285: fixed in yade 0.80.1-2 has caused the Debian Bug report #680285, regarding yade fails to build due to ipython 0.13 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680285: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680285 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: yade fails to build due to ipython 0.13 Date: Wed, 4 Jul 2012 21:23:39 +0200 Size: 5385 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Bug#680285: fixed in yade 0.80.1-2 Date: Wed, 04 Jul 2012 21:22:53 +0000 Size: 5312 URL: From sebastien.villemot at ens.fr Wed Jul 4 21:26:31 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Wed, 04 Jul 2012 23:26:31 +0200 Subject: Bug#680096: ATLAS on PowerPC In-Reply-To: <20120704205310.GA19565@csclub.uwaterloo.ca> (Lennart Sorensen's message of "Wed, 4 Jul 2012 16:53:10 -0400") References: <87liizxwt3.fsf@brouzouf.villemot.name> <20120704192342.GB98820@crustytoothpaste.ath.cx> <87hatnxqme.fsf@brouzouf.villemot.name> <20120704205310.GA19565@csclub.uwaterloo.ca> Message-ID: <87d34bxlo8.fsf@brouzouf.villemot.name> "Lennart Sorensen" writes: > On Wed, Jul 04, 2012 at 09:39:37PM +0200, S?bastien Villemot wrote: >> My understanding is that POWER3 does not have Altivec, so it may >> therefore be the best option. > > Unless of course it has other instructions that the G4 doesn't have. Looking again at Atlas build-system (in CONFIG/src/atlcomp.txt), it is clear that POWER3 is the less specific. In particular it gets no CPU-specific GCC flags, contrary to G4 (which gets -maltivec -mabi=altivec -mcpu=7400 -mtune=7400). So I am going to enforce POWER3. Thanks everyone for your feedback. -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From fleury at puzzle3d.com.br Wed Jul 4 20:47:25 2012 From: fleury at puzzle3d.com.br (Puzzle3D) Date: Wed, 04 Jul 2012 15:47:25 -0500 Subject: oi Message-ID: <2570c43d3eb33fd65be1a2dbe3c4d356@sistemaemkt.com> Ol? encontrei voc?s atrav?s de uma pesquisa por m?quinas cnc laser e router no google por estado , eu me chamo Giordano e Sou de Goi?nia e desenvolvo projetos pra cnc router e laser , muitos comprei no usa gastei mais de 2000$ comprando projetos e a maioria eu fiz s?o todos arrumados , separados por diret?rio com dxf e eps limpos + fotos e no caso dos puzzles em 80% instru??o de montagem. Veja meu anuncio no ML - - Se tiver interesse entre em contato comigo e lhe fa?o um desconto - S?o mais de 700 Quadros 2D De Parede S?o Mais de 600 Puzzles 3D Inumeros Modelos de Caixas - Milhares de Vetores Muitos Projetos de Rel?gios Tutoriais e Cursos e muito mais o conteudo dos Dvd's d?o mais de 9,00 Gb's quase 30.000 Arquivos. - Neste video voc? pode ver 80% dos puzzles que tenho disponiv?is neste pacote : - http://www.youtube.com/watch?v=gU0TqFejULs - - Fa?o projetos personalizados tamb?m se precisar que eu projete um puzzle de acordo com suas necessitades , a licen?a para esses projetos ? apenas para fabrica??o e comercializa??o das pe?as produzidas por meus projetos sendo proibido a comercializa??o ou divulga??o dos projetos para terceiros . - Meu E-Mail : extremesimuladores at gmail.com ou fleury at puzzle3d.com.br - Meu ANuncio no ML: - - http://servico.mercadolivre.com.br/MLB-424760090-projetos-p-cnc-router-cnc-laser-3d-puzzles-2d-quadros-_JM Site da minha empresa Puzzle3D -> http://www.puzzle3d.com.br - Clique neste link para ser removido: http://sistemaemkt.com/acesso/unsubscribe.php?M=9096326&C=4a0a1084ec98ddd5ae942c5bfe415be2&L=693&N=995 From ftpmaster at ftp-master.debian.org Thu Jul 5 09:21:27 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 09:21:27 +0000 Subject: Processing of salome-paravis_6.5.0-1_multi.changes Message-ID: salome-paravis_6.5.0-1_multi.changes uploaded successfully to localhost along with the files: salome-paravis_6.5.0-1.dsc salome-paravis_6.5.0.orig.tar.gz salome-paravis_6.5.0-1.diff.gz salome-paravis_6.5.0-1_amd64.deb salome-paravis-dev_6.5.0-1_amd64.deb paraview-medreader_6.5.0-1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 5 09:21:27 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 09:21:27 +0000 Subject: Processing of salome-geom_6.5.0-1_multi.changes Message-ID: salome-geom_6.5.0-1_multi.changes uploaded successfully to localhost along with the files: salome-geom_6.5.0-1.dsc salome-geom_6.5.0.orig.tar.gz salome-geom_6.5.0-1.diff.gz salome-geom_6.5.0-1_amd64.deb salome-geom-dev_6.5.0-1_amd64.deb salome-geom-doc_6.5.0-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 5 09:21:28 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 09:21:28 +0000 Subject: Processing of salome-med_6.5.0-1_multi.changes Message-ID: salome-med_6.5.0-1_multi.changes uploaded successfully to localhost along with the files: salome-med_6.5.0-1.dsc salome-med_6.5.0.orig.tar.gz salome-med_6.5.0-1.diff.gz salome-med_6.5.0-1_amd64.deb salome-med-dev_6.5.0-1_amd64.deb salome-med-doc_6.5.0-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 5 09:32:10 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 09:32:10 +0000 Subject: salome-geom_6.5.0-1_multi.changes is NEW Message-ID: (new) salome-geom-dev_6.5.0-1_amd64.deb extra devel Numerical simulation pre- and post-processor - geometry module development files Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the geometry module's development files (new) salome-geom-doc_6.5.0-1_all.deb extra doc Numerical simulation pre- and post-processor - geometry module documentation Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the geometry module's documentation. (new) salome-geom_6.5.0-1.diff.gz extra science (new) salome-geom_6.5.0-1.dsc extra science (new) salome-geom_6.5.0-1_amd64.deb extra science Numerical simulation pre- and post-processor - geometry module Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the Salom? geometry module. (new) salome-geom_6.5.0.orig.tar.gz extra science Changes: salome-geom (6.5.0-1) experimental; urgency=low . * New upstream release Override entries for your package: Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. You may have gotten the distribution wrong. You'll get warnings above if files already exist in other distributions. From ftpmaster at ftp-master.debian.org Thu Jul 5 09:32:15 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 09:32:15 +0000 Subject: salome-med_6.5.0-1_multi.changes is NEW Message-ID: (new) salome-med-dev_6.5.0-1_amd64.deb extra devel Numerical simulation pre- and post-processor development files Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the Salom? MED header files, IDL files, and .m4 files. (new) salome-med-doc_6.5.0-1_all.deb extra doc Numerical simulation pre- and post-processor documentation Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the user documentation for Salom?'s MED module. (new) salome-med_6.5.0-1.diff.gz extra science (new) salome-med_6.5.0-1.dsc extra science (new) salome-med_6.5.0-1_amd64.deb extra science Numerical simulation pre- and post-processor Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the Salom? MED private libraries and python files. (new) salome-med_6.5.0.orig.tar.gz extra science Changes: salome-med (6.5.0-1) experimental; urgency=low . * New upstream release. * Split salome source package into smaller modules. Override entries for your package: Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. You may have gotten the distribution wrong. You'll get warnings above if files already exist in other distributions. From ftpmaster at ftp-master.debian.org Thu Jul 5 09:32:17 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 09:32:17 +0000 Subject: salome-paravis_6.5.0-1_multi.changes is NEW Message-ID: (new) paraview-medreader_6.5.0-1_amd64.deb extra science paraview plugin to read MED files MED-fichier (Mod?lisation et Echanges de Donn?es, in English Modelisation and Data Exchange) is a library to store and exchange meshed data or computation results. It uses the HDF5 file format to store the data. . This package contains a paraview plugin to display MED files. (new) salome-paravis-dev_6.5.0-1_amd64.deb extra science paraview-based visualization module for Salome - development files Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the development files for the PARAVIS module. (new) salome-paravis_6.5.0-1.diff.gz extra science (new) salome-paravis_6.5.0-1.dsc extra science (new) salome-paravis_6.5.0-1_amd64.deb extra science paraview-based visualization module for Salome Salom? is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality. . This package contains the Salom? PARAVIS module, for visualization using paraview. (new) salome-paravis_6.5.0.orig.tar.gz extra science Changes: salome-paravis (6.5.0-1) experimental; urgency=low . * Initial release. Override entries for your package: Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. You may have gotten the distribution wrong. You'll get warnings above if files already exist in other distributions. From julien.cristau at logilab.fr Thu Jul 5 10:35:57 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Thu, 5 Jul 2012 12:35:57 +0200 Subject: Bug#680359: paraview: non-versioned shlibs file Message-ID: <20120705103555.GA12897@crater2.logilab.fr> Package: paraview Version: 3.14.1-6 Severity: important Hi, the paraview package ships a shlibs file with no version information. That is a problem for other packages that build a paraview plugin. Something like 'paraview (>= ${upstream_version}), paraview (<< ${upstream_version}+)' might work (many of the libs aren't versioned so I guess there's no ABI guarantee). Thanks, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From julien.cristau at logilab.fr Thu Jul 5 10:48:22 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Thu, 5 Jul 2012 12:48:22 +0200 Subject: Processed: your mail In-Reply-To: <4FF4A7B7.5090607@googlemail.com> References: <4FF49E6A.8030801@googlemail.com> <4FF4A7B7.5090607@googlemail.com> Message-ID: <20120705104822.GA16430@crater2.logilab.fr> On Wed, Jul 4, 2012 at 22:29:43 +0200, Julian Taylor wrote: > On 07/04/2012 09:57 PM, Anton Gladky wrote: > > Hi Julian, > > > > I have fixed that. But if you plan to push ipython_0.13 into wheezy, > > it should be > > done together with yade. That is why I marked this bug belonging to > > ipython as well. > > Otherwise yade will be broken in Wheezy, > > > > please try to get a freeze exception, the fix looks very simple. > It would be a shame to not have 0.13 in wheezy due to this minor hiccup. > I've unblocked yade and overridden its urgency to high so it should get in testing ahead of ipython if the powerpc build gets uploaded in time. Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From torquil at gmail.com Thu Jul 5 11:34:51 2012 From: torquil at gmail.com (Torquil Macdonald =?UTF-8?Q?S=C3=B8rensen?=) Date: Thu, 5 Jul 2012 13:34:51 +0200 Subject: Bug#679407: Blitz++: update to version 0.10 Message-ID: Yes, that would be great. The developers have many times urged people that experience problems to upgrade from 0.9 to the Mercurial version. Much of this will be taken care of by getting 0.10 into Debian. Best regards, Torquil S?rensen From andreas at an3as.eu Thu Jul 5 12:12:48 2012 From: andreas at an3as.eu (Andreas Tille) Date: Thu, 5 Jul 2012 14:12:48 +0200 Subject: Bug#679407: Blitz++: update to version 0.10 In-Reply-To: References: Message-ID: <20120705121248.GI15348@an3as.eu> Hi, any volunteer to do this? The package is team maintained and I *never* had any particular personal interest in this package - just did it to do somebody a favour. I'd volunteer to take over sponsering if somebody prepares a patch in SVN (or moves the package to git.debian.org - at the preference of the person who does the work). Otherwise I'm afraid the upgrade needs to wait until I might have some spare time cycles. Kind regards Andreas. On Thu, Jul 05, 2012 at 01:34:51PM +0200, Torquil Macdonald S??rensen wrote: > Yes, that would be great. The developers have many times urged people > that experience problems to upgrade from 0.9 to the Mercurial version. > Much of this will be taken care of by getting 0.10 into Debian. > > Best regards, > Torquil S??rensen -- http://fam-tille.de From awa.sani78 at yahoo.com Thu Jul 5 12:44:52 2012 From: awa.sani78 at yahoo.com (sani) Date: Thu, 5 Jul 2012 05:44:52 -0700 (PDT) Subject: hello Message-ID: <1341492292.66662.YahooMailClassic@web120104.mail.ne1.yahoo.com> Dear, I apologized, If this mail finds you disturbing,my name is Miss awa sani.I am contacting you for the investment purposes. I am available as needed to discuss this further with you at any time. Please let me know how you wish to proceed. I look forward to hearing from you soon. Thanks awa From ftpmaster at ftp-master.debian.org Thu Jul 5 13:12:03 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 13:12:03 +0000 Subject: Processing of imview_1.1.9c-9_amd64.changes Message-ID: imview_1.1.9c-9_amd64.changes uploaded successfully to localhost along with the files: imview_1.1.9c-9.dsc imview_1.1.9c.orig.tar.gz imview_1.1.9c-9.debian.tar.gz imview_1.1.9c-9_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 5 13:17:10 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 13:17:10 +0000 Subject: imview_1.1.9c-9_amd64.changes REJECTED Message-ID: Reject Reasons: Source package imview does not have 'DM-Upload-Allowed: yes' in its most recent version (1.1.9c-8) Warnings: ignoring imview_1.1.9c.orig.tar.gz, since it's already in the archive. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From biucchi at freenet.de Thu Jul 5 13:21:19 2012 From: biucchi at freenet.de (biucchi at freenet.de) Date: Thu, 05 Jul 2012 15:21:19 +0200 Subject: Bug#617931: gmsh: multiple licensing issues Message-ID: <17e14454a36a98da8e85d4691d3ae3f4@email.freenet.de> Dear All, I don't understand if this bug is solved: I see that now "gmsh" depends on the OpenCASCADE Community Edition. Regards, Gabriele --- Nutzen Sie freenet Mail optimal angepasst f?r Ihr iPhone, Android oder Nokia Handy auch von unterwegs. Alle Infos und Download unter http://mail.freenet.de/mobile-email/index.html From bintabas at yahoo.com Thu Jul 5 13:39:07 2012 From: bintabas at yahoo.com (binta Basim) Date: Thu, 5 Jul 2012 14:39:07 +0100 (BST) Subject: hello Message-ID: <1341495547.58534.YahooMailClassic@web29219.mail.ird.yahoo.com> My name is bintu,i am woman. i am interest on you in relationship so that is why i delighted to contact you,i am honest and caring woman,please contact me if u are interested. >From bintu -------------- next part -------------- An HTML attachment was scrubbed... URL: From ftpmaster at ftp-master.debian.org Thu Jul 5 14:52:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 14:52:09 +0000 Subject: Processing of imview_1.1.9c-9_amd64.changes Message-ID: imview_1.1.9c-9_amd64.changes uploaded successfully to localhost along with the files: imview_1.1.9c-9.dsc imview_1.1.9c-9.debian.tar.gz imview_1.1.9c-9_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 5 15:02:11 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 05 Jul 2012 15:02:11 +0000 Subject: imview_1.1.9c-9_amd64.changes ACCEPTED into unstable Message-ID: Accepted: imview_1.1.9c-9.debian.tar.gz to main/i/imview/imview_1.1.9c-9.debian.tar.gz imview_1.1.9c-9.dsc to main/i/imview/imview_1.1.9c-9.dsc imview_1.1.9c-9_amd64.deb to main/i/imview/imview_1.1.9c-9_amd64.deb Changes: imview (1.1.9c-9) unstable; urgency=low . * [2c68893] Fix FTBFS with gcc-4.7. Thanks to Sebastian Ramacher. (Closes: #678675) * [e2cc2e0] Add myself to uploaders. * [8d1263c] Use Standards-Version: 3.9.3, no changes. Override entries for your package: imview_1.1.9c-9.dsc - source science imview_1.1.9c-9_amd64.deb - optional science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 678675 Thank you for your contribution to Debian. From owner at bugs.debian.org Thu Jul 5 15:03:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Thu, 05 Jul 2012 15:03:04 +0000 Subject: Bug#678675: marked as done (imview: FTBFS with gcc 4.7) References: <20120623170212.9978.90451.reportbug@localhost> Message-ID: Your message dated Thu, 05 Jul 2012 15:02:11 +0000 with message-id and subject line Bug#678675: fixed in imview 1.1.9c-9 has caused the Debian Bug report #678675, regarding imview: FTBFS with gcc 4.7 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 678675: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678675 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Sebastian Ramacher Subject: imview: FTBFS with gcc 4.7 Date: Sat, 23 Jun 2012 19:02:12 +0200 Size: 146122 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Bug#678675: fixed in imview 1.1.9c-9 Date: Thu, 05 Jul 2012 15:02:11 +0000 Size: 4469 URL: From gladky.anton at gmail.com Thu Jul 5 16:14:36 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Thu, 5 Jul 2012 18:14:36 +0200 Subject: Processed: your mail In-Reply-To: <20120705104822.GA16430@crater2.logilab.fr> References: <4FF49E6A.8030801@googlemail.com> <4FF4A7B7.5090607@googlemail.com> <20120705104822.GA16430@crater2.logilab.fr> Message-ID: Thanks, Julien! It is built on powerpc already, but not yet uploaded. Anton 2012/7/5 Julien Cristau : > On Wed, Jul 4, 2012 at 22:29:43 +0200, Julian Taylor wrote: > > I've unblocked yade and overridden its urgency to high so it should get > in testing ahead of ipython if the powerpc build gets uploaded in time. > > Cheers, > Julien > -- > Julien Cristau > Logilab http://www.logilab.fr/ > Informatique scientifique & gestion de connaissances From ppc.addon at gmail.com Thu Jul 5 16:27:52 2012 From: ppc.addon at gmail.com (nello martuscielli) Date: Thu, 5 Jul 2012 18:27:52 +0200 Subject: Bug#680096: ATLAS on PowerPC In-Reply-To: <87liizxwt3.fsf@brouzouf.villemot.name> References: <87liizxwt3.fsf@brouzouf.villemot.name> Message-ID: On Wed, Jul 4, 2012 at 7:26 PM, S?bastien Villemot wrote: > [please keep the bug in Cc:, I?m not subscribed to the list] > > Dear PowerPC porters, > > As a co-maintainer of atlas, I intend to force a specific PowerPC CPU > architecture when the package is built on buildds (in order to fix > #680096). > > Atlas gives me the following options: POWER3, POWER4, POWER5, POWER6, > POWER7, PPCG4, PPCG5. > > I would like to know which one of these is the most generic > architecture, so that the atlas package thus modified will work on all > supported machines. I guess this is either POWER3 or PPCG4, but it is as i know prof. C. Whaley (atlas author) is going to remove the support for a lot of old power architecture machines. nello -- Power Mac G4 AGP 450MHz - CRUX PPC (32bit) From gladky.anton at gmail.com Thu Jul 5 19:29:46 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Thu, 5 Jul 2012 21:29:46 +0200 Subject: Bug#680359: paraview: non-versioned shlibs file In-Reply-To: <20120705103555.GA12897@crater2.logilab.fr> References: <20120705103555.GA12897@crater2.logilab.fr> Message-ID: Hi, I did not quite understand. paraview-dev should depend on 'paraview (>= ${upstream_version}), paraview (<<${upstream_version}+)'? Thanks Anton 2012/7/5 Julien Cristau : > Package: paraview > Version: 3.14.1-6 > Severity: important > > Hi, > > the paraview package ships a shlibs file with no version information. > That is a problem for other packages that build a paraview plugin. > Something like 'paraview (>= ${upstream_version}), paraview (<< > ${upstream_version}+)' might work (many of the libs aren't versioned so > I guess there's no ABI guarantee). > > Thanks, > Julien > -- > Julien Cristau > Logilab http://www.logilab.fr/ > Informatique scientifique & gestion de connaissances > > > > -- > debian-science-maintainers mailing list > debian-science-maintainers at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/debian-science-maintainers From sthibault at debian.org Thu Jul 5 19:38:52 2012 From: sthibault at debian.org (Samuel Thibault) Date: Thu, 5 Jul 2012 16:38:52 -0300 Subject: Bug#680428: liblapacke-dev: Can not link against liblapacke Message-ID: <20120705193852.GA5830@type.eduroam.ufrgs.br> Package: liblapacke-dev Version: 3.4.1-4 Severity: serious Justification: Makes the package unusable Hello, int main(void) {} $ gcc test.c -o test -L/usr/lib/lapack -llapacke /usr/lib/lapack/liblapacke.so: undefined reference to `clagge_' etc. These symbols are indeed not in the liblapack.so library. Samuel -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.0.4 (SMP w/8 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages liblapacke-dev depends on: ii liblapacke 3.4.1-4 liblapacke-dev recommends no packages. liblapacke-dev suggests no packages. -- no debconf information -- Samuel Thibault quit When the quit statement is read, the bc processor is terminated, regardless of where the quit state- ment is found. For example, "if (0 == 1) quit" will cause bc to terminate. (Seen in the manpage for "bc". Note the "if" statement's logic) From pablo.duboue at gmail.com Thu Jul 5 20:20:25 2012 From: pablo.duboue at gmail.com (Pablo Duboue) Date: Thu, 5 Jul 2012 16:20:25 -0400 Subject: Bug#503861: A rebuild fixes it. Message-ID: found apertium-en-ca/0.8.9-1 found apertium-en-es/0.6.0-1.1 found apertium-eo-ca/0.9.0-1.1 found apertium-eo-es/0.9.0-1.1 found apertium-eu-es/0.3.1-1 found apertium-fr-es/0.9.0-1.1 found apertium-oc-ca/1.0.5-1.1 found apertium-oc-es/1.0.5-1.1 thanks Hi, The above packages fail and should be fixed with a rebuild. I'll issue a wanna-build binNMU request shortly. The problem is that apertium is a compiler for these packages and the output it produces depends on PCRE internal format. Every time PCRE changes, apertium gets re-build but its language packs are not. There are some possible ways to solve this, but might need some input from the PCRE maintainer and Debian Science. We will discuss on the mailing list and fix this for good. P. From pablo.duboue at gmail.com Thu Jul 5 20:29:25 2012 From: pablo.duboue at gmail.com (Pablo Duboue) Date: Thu, 5 Jul 2012 16:29:25 -0400 Subject: Bug#503861: Info received (A rebuild fixes it.) In-Reply-To: References: Message-ID: found 503861apertium-en-ca/0.8.9-1 found 503861apertium-en-es/0.6.0-1.1 found 503861apertium-eo-ca/0.9.0-1.1 found 503861apertium-eo-es/0.9.0-1.1 found 503861apertium-eu-es/0.3.1-1 found 503861apertium-fr-es/0.9.0-1.1 found 503861apertium-oc-ca/1.0.5-1.1 found 503861apertium-oc-es/1.0.5-1.1 From pablo.duboue at gmail.com Thu Jul 5 20:30:58 2012 From: pablo.duboue at gmail.com (Pablo Duboue) Date: Thu, 5 Jul 2012 16:30:58 -0400 Subject: Bug#503861: Info received (A rebuild fixes it.) In-Reply-To: References: Message-ID: found 503861 apertium-en-ca/0.8.9-1 found 503861 apertium-en-es/0.6.0-1.1 found 503861 apertium-eo-ca/0.9.0-1.1 found 503861 apertium-eo-es/0.9.0-1.1 found 503861 apertium-eu-es/0.3.1-1 found 503861 apertium-fr-es/0.9.0-1.1 found 503861 apertium-oc-ca/1.0.5-1.1 found 503861 apertium-oc-es/1.0.5-1.1 On 7/5/12, Pablo Duboue wrote: > found 503861apertium-en-ca/0.8.9-1 > found 503861apertium-en-es/0.6.0-1.1 > found 503861apertium-eo-ca/0.9.0-1.1 > found 503861apertium-eo-es/0.9.0-1.1 > found 503861apertium-eu-es/0.3.1-1 > found 503861apertium-fr-es/0.9.0-1.1 > found 503861apertium-oc-ca/1.0.5-1.1 > found 503861apertium-oc-es/1.0.5-1.1 > From lbuckheit at brynmawr.edu Thu Jul 5 23:29:39 2012 From: lbuckheit at brynmawr.edu (Lauren Buckheit) Date: Thu, 05 Jul 2012 19:29:39 -0400 (EDT) Subject: Claim requirements Message-ID: <0a2186fc-b08a-46c4-a62d-9ee13c2bac2c@ganesh.brynmawr.edu> You are receiving this message because you are a Winner of 300,000 Pounds from Nokia Online Lottery game 2012. Claim requirements are as follows: (1) Your full names (2) Contact Address (3) Age (4) Occupation (5) Telephone (6) Sex (7) Nationality Contact Mr. Thomas Hillary on (nokiadp77 at yahoo.cn) Tel: +447024081232 Copyright ?2012 Nokia. All rights reserved. From julien.cristau at logilab.fr Fri Jul 6 07:45:26 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Fri, 6 Jul 2012 09:45:26 +0200 Subject: Bug#680359: paraview: non-versioned shlibs file In-Reply-To: References: <20120705103555.GA12897@crater2.logilab.fr> Message-ID: <20120706074526.GA3374@crater2.logilab.fr> On Thu, Jul 5, 2012 at 21:29:46 +0200, Anton Gladky wrote: > Hi, > > I did not quite understand. paraview-dev should depend on > 'paraview (>= ${upstream_version}), paraview (<<${upstream_version}+)'? > no, the shlibs file shipped by paraview, which is installed in /var/lib/dpkg/info/paraview.shlibs, and whose contents end up in the Depends field of packages linked with paraview's libraries, should enforce some version constraints to ensure compatibility. I can look at providing a patch if you want. Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From debian at abeckmann.de Fri Jul 6 09:14:29 2012 From: debian at abeckmann.de (Andreas Beckmann) Date: Fri, 06 Jul 2012 11:14:29 +0200 Subject: Bug#680484: gmap and scotch: error when trying to install together Message-ID: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> Package: gmap,scotch Version: scotch/5.1.12b.dfsg-1.1 Severity: serious User: treinen at debian.org Usertags: edos-file-overwrite Date: 2012-06-16 Architecture: amd64 Distribution: sid Hi, automatic installation tests of packages that share a file and at the same time do not conflict by their package dependency relationships has detected the following problem: Selecting previously unselected package scotch. Unpacking scotch (from .../scotch_5.1.12b.dfsg-1.1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/scotch_5.1.12b.dfsg-1.1_amd64.deb (--unpack): trying to overwrite '/usr/share/man/man1/gmap.1.gz', which is also in package gmap 2012-06-12-1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/scotch_5.1.12b.dfsg-1.1_amd64.deb This is a serious bug as it makes installation fail, and violates sections 7.6.1 and 10.1 of the policy. An optimal solution would consist in only one of the packages installing that file, and renaming or removing the file in the other package. Depending on the circumstances you might also consider Replace relations or file diversions. If the conflicting situation cannot be resolved then, as a last resort, the two packages have to declare a mutual Conflict. Please take into account that Replaces, Conflicts and diversions should only be used when packages provide different implementations for the same functionality. Here is a list of files that are known to be shared by both packages (according to the Contents file for sid/amd64, which may be slightly out of sync): usr/bin/gmap usr/share/man/man1/gmap.1.gz This bug is assigned to both packages. If you, the maintainers of the two packages in question, have agreed on which of the packages will resolve the problem please reassign the bug to that package. You may also register in the BTS that the other package is affected by the bug. - Andreas PS: for more information about the detection of file overwrite errors of this kind see http://edos.debian.net/file-overwrites/. -------------- next part -------------- A non-text attachment was scrubbed... Name: gmap=2012-06-12-1_scotch=5.1.12b.dfsg-1.1.log.gz Type: application/x-gzip Size: 5039 bytes Desc: not available URL: From owner at bugs.debian.org Fri Jul 6 10:00:33 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 10:00:33 +0000 Subject: Processed: found 676140 in 1.8.4-1, found 677407 in 1:3.4+1, found 680481 in vmware-manager/0.2.0-1 ... References: <1341568597-3354-bts-debian@abeckmann.de> Message-ID: Processing commands for control at bugs.debian.org: > found 676140 1.8.4-1 Bug #676140 [sssd] needs to do proper cleanup of /etc/apparmor.d/disable/ Marked as found in versions sssd/1.8.4-1. > found 677407 1:3.4+1 Bug #677407 [gnome-core] gnome-dbg: fails to upgrade from squeeze - apt does not find an upgrade path Marked as found in versions meta-gnome3/1:3.4+1. > found 680481 vmware-manager/0.2.0-1 Bug #680481 [vmm,vmware-manager] vmm and vmware-manager: error when trying to install together Marked as found in versions vmware-manager/0.2.0-1. > found 680481 vmm/0.6.0-1 Bug #680481 [vmm,vmware-manager] vmm and vmware-manager: error when trying to install together Marked as found in versions vmm/0.6.0-1. > found 680483 beast/0.7.4-4 Bug #680483 [beast,beast-mcmc] beast and beast-mcmc: error when trying to install together Marked as found in versions beast/0.7.4-4. > found 680483 beast-mcmc/1.6.2-2 Bug #680483 [beast,beast-mcmc] beast and beast-mcmc: error when trying to install together Marked as found in versions beast-mcmc/1.6.2-2. > found 680484 gmap/2012-06-12-1 Bug #680484 [gmap,scotch] gmap and scotch: error when trying to install together Marked as found in versions gmap/2012-06-12-1. > found 680484 scotch/5.1.12b.dfsg-1.1 Bug #680484 [gmap,scotch] gmap and scotch: error when trying to install together Marked as found in versions scotch/5.1.12b.dfsg-1.1. > thanks Stopping processing here. Please contact me if you need assistance. -- 676140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=676140 677407: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677407 680481: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680481 680483: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680483 680484: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680484 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From christophe.trophime at lncmi.cnrs.fr Fri Jul 6 12:40:12 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Fri, 06 Jul 2012 14:40:12 +0200 Subject: Bug#679407: Blitz++: update to version 0.10 In-Reply-To: <20120705121248.GI15348@an3as.eu> References: <20120705121248.GI15348@an3as.eu> Message-ID: <1341578412.3643.55.camel@calcul8.lcmi.local> On Thu, 2012-07-05 at 14:12 +0200, Andreas Tille wrote: > Hi, > > any volunteer to do this? The package is team maintained and I *never* > had any particular personal interest in this package - just did it to do > somebody a favour. I'd volunteer to take over sponsering if somebody > prepares a patch in SVN (or moves the package to git.debian.org - at the > preference of the person who does the work). Otherwise I'm afraid the > upgrade needs to wait until I might have some spare time cycles. I've just uploaded an update into Debian Science svn Hope it helps. Best C > > Kind regards > > Andreas. > > On Thu, Jul 05, 2012 at 01:34:51PM +0200, Torquil Macdonald S??rensen wrote: > > Yes, that would be great. The developers have many times urged people > > that experience problems to upgrade from 0.9 to the Mercurial version. > > Much of this will be taken care of by getting 0.10 into Debian. > > > > Best regards, > > Torquil S??rensen > > -- > http://fam-tille.de > > > From christophe.trophime at lncmi.cnrs.fr Fri Jul 6 15:47:01 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Fri, 06 Jul 2012 17:47:01 +0200 Subject: Bug#680484: gmap and scotch: error when trying to install together In-Reply-To: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <1341589621.29703.18.camel@calcul8.lcmi.local> On Fri, 2012-07-06 at 11:14 +0200, Andreas Beckmann wrote: > Package: gmap,scotch > Version: scotch/5.1.12b.dfsg-1.1 > Severity: serious > User: treinen at debian.org > Usertags: edos-file-overwrite > > Date: 2012-06-16 > Architecture: amd64 > Distribution: sid > > Hi, > > automatic installation tests of packages that share a file and at the > same time do not conflict by their package dependency relationships has > detected the following problem: > > Selecting previously unselected package scotch. > Unpacking scotch (from .../scotch_5.1.12b.dfsg-1.1_amd64.deb) ... > dpkg: error processing /var/cache/apt/archives/scotch_5.1.12b.dfsg-1.1_amd64.deb (--unpack): > trying to overwrite '/usr/share/man/man1/gmap.1.gz', which is also in package gmap 2012-06-12-1 > dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) > Errors were encountered while processing: > /var/cache/apt/archives/scotch_5.1.12b.dfsg-1.1_amd64.deb > > This is a serious bug as it makes installation fail, and violates > sections 7.6.1 and 10.1 of the policy. An optimal solution would > consist in only one of the packages installing that file, and renaming > or removing the file in the other package. Depending on the > circumstances you might also consider Replace relations or file > diversions. If the conflicting situation cannot be resolved then, as a > last resort, the two packages have to declare a mutual > Conflict. Please take into account that Replaces, Conflicts and > diversions should only be used when packages provide different > implementations for the same functionality. > > Here is a list of files that are known to be shared by both packages > (according to the Contents file for sid/amd64, which may be > slightly out of sync): > > usr/bin/gmap > usr/share/man/man1/gmap.1.gz > > This bug is assigned to both packages. If you, the maintainers of > the two packages in question, have agreed on which of the packages will > resolve the problem please reassign the bug to that package. You may > also register in the BTS that the other package is affected by the bug. > > - Andreas > > PS: for more information about the detection of file overwrite errors > of this kind see http://edos.debian.net/file-overwrites/. Hi, I just upload a fix on Debian science git. Hope it helps Best C From christophe.trophime at lncmi.cnrs.fr Fri Jul 6 15:47:01 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Fri, 06 Jul 2012 17:47:01 +0200 Subject: Bug#680484: gmap and scotch: error when trying to install together In-Reply-To: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <1341589621.29703.18.camel@calcul8.lcmi.local> On Fri, 2012-07-06 at 11:14 +0200, Andreas Beckmann wrote: > Package: gmap,scotch > Version: scotch/5.1.12b.dfsg-1.1 > Severity: serious > User: treinen at debian.org > Usertags: edos-file-overwrite > > Date: 2012-06-16 > Architecture: amd64 > Distribution: sid > > Hi, > > automatic installation tests of packages that share a file and at the > same time do not conflict by their package dependency relationships has > detected the following problem: > > Selecting previously unselected package scotch. > Unpacking scotch (from .../scotch_5.1.12b.dfsg-1.1_amd64.deb) ... > dpkg: error processing /var/cache/apt/archives/scotch_5.1.12b.dfsg-1.1_amd64.deb (--unpack): > trying to overwrite '/usr/share/man/man1/gmap.1.gz', which is also in package gmap 2012-06-12-1 > dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) > Errors were encountered while processing: > /var/cache/apt/archives/scotch_5.1.12b.dfsg-1.1_amd64.deb > > This is a serious bug as it makes installation fail, and violates > sections 7.6.1 and 10.1 of the policy. An optimal solution would > consist in only one of the packages installing that file, and renaming > or removing the file in the other package. Depending on the > circumstances you might also consider Replace relations or file > diversions. If the conflicting situation cannot be resolved then, as a > last resort, the two packages have to declare a mutual > Conflict. Please take into account that Replaces, Conflicts and > diversions should only be used when packages provide different > implementations for the same functionality. > > Here is a list of files that are known to be shared by both packages > (according to the Contents file for sid/amd64, which may be > slightly out of sync): > > usr/bin/gmap > usr/share/man/man1/gmap.1.gz > > This bug is assigned to both packages. If you, the maintainers of > the two packages in question, have agreed on which of the packages will > resolve the problem please reassign the bug to that package. You may > also register in the BTS that the other package is affected by the bug. > > - Andreas > > PS: for more information about the detection of file overwrite errors > of this kind see http://edos.debian.net/file-overwrites/. Hi, I just upload a fix on Debian science git. Hope it helps Best C From owner at bugs.debian.org Fri Jul 6 16:33:10 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 16:33:10 +0000 Subject: Processed: found 680428 in 3.4.1-3, tagging 680428 References: <1341592238-202-bts-sebastien.villemot@ens.fr> Message-ID: Processing commands for control at bugs.debian.org: > found 680428 3.4.1-3 Bug #680428 [liblapacke-dev] liblapacke-dev: Can not link against liblapacke Marked as found in versions lapack/3.4.1-3. > tags 680428 + pending Bug #680428 [liblapacke-dev] liblapacke-dev: Can not link against liblapacke Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 680428: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680428 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From noreply at release.debian.org Fri Jul 6 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Fri, 06 Jul 2012 16:39:15 +0000 Subject: getdp 2.2.0-1 MIGRATED to testing Message-ID: FYI: The status of the getdp source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 2.2.0-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Fri Jul 6 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Fri, 06 Jul 2012 16:39:15 +0000 Subject: libquantum 1.1.0-2 MIGRATED to testing Message-ID: FYI: The status of the libquantum source package in Debian's testing distribution has changed. Previous version: 1.1.0-1 Current version: 1.1.0-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From pasky at ucw.cz Fri Jul 6 16:25:23 2012 From: pasky at ucw.cz (pasky at ucw.cz) Date: Fri, 06 Jul 2012 18:25:23 +0200 Subject: Bug#670566: arduino-mk: Including libraries is broken Message-ID: <20120706162523.6588.91476.reportbug@nibble> Package: arduino-mk Version: 0.8-4 Followup-For: Bug #670566 Dear Maintainer, the support for adding custom libraries is still broken. There is a typo and apparently nobody tested the change. :-) --- Arduino.mk~ 2012-07-05 22:43:19.755009325 +0200 +++ Arduino.mk 2012-07-05 22:43:40.379008506 +0200 @@ -334,8 +334,8 @@ SYS_INCLUDES = $(patsubst %,-I%,$(SYS_LIBS)) $(patsubst %,-I%,$(USER_LIBS)) LIB_C_SRCS = $(wildcard $(patsubst %,%/*.c,$(SYS_LIBS))) LIB_CPP_SRCS = $(wildcard $(patsubst %,%/*.cpp,$(SYS_LIBS))) -USER_LIB_CPP_SRC = $(wildcard $(patsubst %,%/*.cpp,$(USER_LIBS))) -USER_LIB_C_SRC = $(wildcard $(patsubst %,%/*.c,$(USER_LIBS))) +USER_LIB_CPP_SRCS = $(wildcard $(patsubst %,%/*.cpp,$(USER_LIBS))) +USER_LIB_C_SRCS = $(wildcard $(patsubst %,%/*.c,$(USER_LIBS))) LIB_OBJS = $(patsubst $(ARDUINO_LIB_PATH)/%.c,$(OBJDIR)/libs/%.o,$(LIB_C_SRCS)) \ $(patsubst $(ARDUINO_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(LIB_CPP_SRCS)) \ $(patsubst $(USER_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.o,$(USER_LIB_CPP_SRCS)) \ -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=cs_CZ.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages arduino-mk depends on: ii arduino-core 1:1.0.1+dfsg-3 ii libconfig-yaml-perl 1.42-2 ii perl-doc 5.14.2-12 arduino-mk recommends no packages. arduino-mk suggests no packages. -- no debconf information From torquil at gmail.com Fri Jul 6 17:55:53 2012 From: torquil at gmail.com (Torquil Macdonald =?UTF-8?Q?S=C3=B8rensen?=) Date: Fri, 06 Jul 2012 19:55:53 +0200 Subject: Bug#680549: libgmm++-dev: Dependency on libmumps-dev Message-ID: <4FF726A9.40903@gmail.com> Package: libgmm++-dev Version: 4.1.1-10 Severity: normal The file /usr/include/gmm/gmm_MUMPS_interface.h from libgmm++-dev includes smumps_c.h, which is in libmumps-dev. But libgmm++-dev neither depends, recommends nor suggests libmumps-dev. That is a bug, right? Best regards, Torquil S?rensen -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (700, 'unstable'), (500, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.4.4 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- no debconf information From owner at bugs.debian.org Fri Jul 6 18:06:08 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:06:08 +0000 Subject: Processed: found 660259 in 1.4.1-3 References: <1341597850-2270-bts-sthibault@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > found 660259 1.4.1-3 Bug #660259 [libmpich2-dev] mpich2: FTBFS: [sparc] missing files Bug #666140 [libmpich2-dev] mpich2: FTBFS: dh_install: libmpich2-3 missing files (usr/lib/libmpich.so.3*), aborting Marked as found in versions mpich2/1.4.1-3. Marked as found in versions mpich2/1.4.1-3. > thanks Stopping processing here. Please contact me if you need assistance. -- 660259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660259 666140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666140 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 6 18:30:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:07 +0000 Subject: Bug#429501: marked as done (atlas3-base: Illegal instruction in idamax on Crusoe) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <1181915439.21233.11.camel@localhost> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #429501, regarding atlas3-base: Illegal instruction in idamax on Crusoe to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 429501: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=429501 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Adam C Powell IV Subject: atlas3-base: Illegal instruction in idamax on Crusoe Date: Fri, 15 Jun 2007 09:50:38 -0400 Size: 13671 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3418 URL: From owner at bugs.debian.org Fri Jul 6 18:30:10 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:10 +0000 Subject: Bug#600980: marked as done (libblas3gf: Illegal instruction when multiplying matrices) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20101022032859.23406.66387.reportbug@cld0.dyndns.org> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #581761, regarding libblas3gf: Illegal instruction when multiplying matrices to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 581761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Christopher Durden Subject: libblas3gf: Illegal instruction when multiplying matrices Date: Thu, 21 Oct 2010 22:28:59 -0500 Size: 2836 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3427 URL: From owner at bugs.debian.org Fri Jul 6 18:30:11 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:11 +0000 Subject: Bug#613094: marked as done (libatlas: Error in cblas_dgemm in ATLAS 3.8.3 in Debian GNU/kFreeBSD 32 bits) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20110212211530.2805.41233.reportbug@geo.mat.ucm.es> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #581761, regarding libatlas: Error in cblas_dgemm in ATLAS 3.8.3 in Debian GNU/kFreeBSD 32 bits to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 581761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?q?Jos=C3=A9_Luis_Garc=C3=ADa_Pallero?= Subject: libatlas: Error in cblas_dgemm in ATLAS 3.8.3 in Debian GNU/kFreeBSD 32 bits Date: Sat, 12 Feb 2011 22:15:30 +0100 Size: 3064 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3427 URL: From owner at bugs.debian.org Fri Jul 6 18:30:10 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:10 +0000 Subject: Bug#581761: marked as done (libatlas3gf-base: Illegal instruction on ATL_diamax_xp1yp0aXbX makes matplotlib crash) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <1273939948.5604.1.camel@Portable-s2m.cnrs-mrs.fr> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #581761, regarding libatlas3gf-base: Illegal instruction on ATL_diamax_xp1yp0aXbX makes matplotlib crash to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 581761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Fabrice Silva Subject: libatlas3gf-base: Illegal instruction on ATL_diamax_xp1yp0aXbX makes matplotlib crash Date: Sat, 15 May 2010 13:12:28 -0300 Size: 5168 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3427 URL: From owner at bugs.debian.org Fri Jul 6 18:30:12 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:12 +0000 Subject: Bug#613478: marked as done (atlas: builds using non-generic instructions in -base package) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20110215012950.GA6163@crustytoothpaste.ath.cx> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #581761, regarding atlas: builds using non-generic instructions in -base package to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 581761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: "brian m. carlson" Subject: atlas: builds using non-generic instructions in -base package Date: Tue, 15 Feb 2011 01:29:52 +0000 Size: 5347 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3427 URL: From owner at bugs.debian.org Fri Jul 6 18:30:12 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:12 +0000 Subject: Bug#619853: marked as done (libatlas3gf-base: Illegal instruction in ATL_zgemvC_a1_x1_b0_y1) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20110327161029.GA32655@bully> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #581761, regarding libatlas3gf-base: Illegal instruction in ATL_zgemvC_a1_x1_b0_y1 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 581761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thomas Weber Subject: libatlas3gf-base: Illegal instruction in ATL_zgemvC_a1_x1_b0_y1 Date: Sun, 27 Mar 2011 18:10:29 +0200 Size: 4061 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3427 URL: From owner at bugs.debian.org Fri Jul 6 18:30:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:13 +0000 Subject: Bug#622082: marked as done (python-matplotlib: Instruction not allowed (sse2?)) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20110410034950.14498.74958.reportbug@localhost.localdomain> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #581761, regarding python-matplotlib: Instruction not allowed (sse2?) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 581761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Pierre LeSimple Subject: python-matplotlib: Instruction not allowed (sse2?) Date: Sat, 09 Apr 2011 23:49:50 -0400 Size: 6089 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3427 URL: From owner at bugs.debian.org Fri Jul 6 18:30:15 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:15 +0000 Subject: Bug#610196: marked as done (libatlas3gf-base: Illegal instruction ATL_dupNBmm0_1_0_b0 on amd64: AMD Opteron(tm) Processor 246) References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20110116031029.32399.66179.reportbug@novo.onerussian.com> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #610196, regarding libatlas3gf-base: Illegal instruction ATL_dupNBmm0_1_0_b0 on amd64: AMD Opteron(tm) Processor 246 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 610196: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=610196 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Yaroslav Halchenko Subject: libatlas3gf-base: Illegal instruction ATL_dupNBmm0_1_0_b0 on amd64: AMD Opteron(tm) Processor 246 Date: Sat, 15 Jan 2011 22:10:29 -0500 Size: 4488 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3428 URL: From owner at bugs.debian.org Fri Jul 6 18:30:18 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:18 +0000 Subject: Bug#635520: marked as done (octave3.2: Octave dies with "panic: Illegal instruction") References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20110726141756.3334.2351.reportbug@coroico.obspm.fr> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #635520, regarding octave3.2: Octave dies with "panic: Illegal instruction" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 635520: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=635520 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Shan Mignot Subject: octave3.2: Octave dies with "panic: Illegal instruction" Date: Tue, 26 Jul 2011 16:17:56 +0200 Size: 6800 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3428 URL: From owner at bugs.debian.org Fri Jul 6 18:30:18 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:18 +0000 Subject: Bug#655586: marked as done (libatlas3gf-base and "Illegal instruction") References: <87a9zcwxso.fsf@brouzouf.villemot.name> <4F0EF4D9.6080005@gmail.com> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #635520, regarding libatlas3gf-base and "Illegal instruction" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 635520: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=635520 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Stefano Lattarini Subject: libatlas3gf-base and "Illegal instruction" Date: Thu, 12 Jan 2012 15:57:29 +0100 Size: 4249 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3428 URL: From owner at bugs.debian.org Fri Jul 6 18:30:19 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:30:19 +0000 Subject: Bug#671834: marked as done (libatlas3gf-base: Octave pinv function fails with message "illegal instruction") References: <87a9zcwxso.fsf@brouzouf.villemot.name> <20120507100945.4184.25891.reportbug@duron-sid1.abrenci.com> Message-ID: Your message dated Fri, 06 Jul 2012 20:26:47 +0200 with message-id <87a9zcwxso.fsf at brouzouf.villemot.name> and subject line atlas: illegal instructions on x86 should be gone has caused the Debian Bug report #635520, regarding libatlas3gf-base: Octave pinv function fails with message "illegal instruction" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 635520: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=635520 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Andrea Brenci Subject: libatlas3gf-base: Octave pinv function fails with message "illegal instruction" Date: Mon, 07 May 2012 12:09:45 +0200 Size: 3108 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: atlas: illegal instructions on x86 should be gone Date: Fri, 06 Jul 2012 20:26:47 +0200 Size: 3428 URL: From gladky.anton at gmail.com Fri Jul 6 18:33:59 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Fri, 06 Jul 2012 18:33:59 +0000 Subject: [2cba162] Fix for Bug#680549 committed to git Message-ID: tags 680549 + pending thanks Hello, The following change has been committed for this bug by Anton Gladky on Fri, 6 Jul 2012 20:33:55 +0200. The fix will be in the next upload. ==================================== Add libmumps-dev to Depends of libgmm++-dev. (Closes: #680549) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=2cba162 From gladky.anton at gmail.com Fri Jul 6 18:33:59 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Fri, 06 Jul 2012 18:33:59 +0000 Subject: Bug#680549: [2cba162] Fix for Bug#680549 committed to git Message-ID: tags 680549 + pending thanks Hello, The following change has been committed for this bug by Anton Gladky on Fri, 6 Jul 2012 20:33:55 +0200. The fix will be in the next upload. ==================================== Add libmumps-dev to Depends of libgmm++-dev. (Closes: #680549) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=2cba162 From owner at bugs.debian.org Fri Jul 6 18:36:05 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:36:05 +0000 Subject: Processed: [2cba162] Fix for Bug#680549 committed to git References: Message-ID: Processing commands for control at bugs.debian.org: > tags 680549 + pending Bug #680549 [libgmm++-dev] libgmm++-dev: Dependency on libmumps-dev Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 680549: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680549 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From gladky.anton at gmail.com Fri Jul 6 18:46:30 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Fri, 6 Jul 2012 20:46:30 +0200 Subject: Bug#664943: Closing the bug Message-ID: fixed 664943 1.1.9c-9 thanks From owner at bugs.debian.org Fri Jul 6 18:51:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:51:13 +0000 Subject: Processed: Closing the bug References: Message-ID: Processing commands for control at bugs.debian.org: > fixed 664943 1.1.9c-9 Bug #664943 [src:imview] imview: FTBFS: imview.o: could not read symbols: Bad value Marked as fixed in versions imview/1.1.9c-9. > thanks Stopping processing here. Please contact me if you need assistance. -- 664943: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=664943 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 6 18:51:16 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 18:51:16 +0000 Subject: Bug#664943: marked as done (imview: FTBFS: imview.o: could not read symbols: Bad value) References: <20120321204139.GA21583@xanadu.blop.info> Message-ID: Your message dated Fri, 6 Jul 2012 20:46:30 +0200 with message-id and subject line Closing the bug has caused the Debian Bug report #664943, regarding imview: FTBFS: imview.o: could not read symbols: Bad value to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 664943: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=664943 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Lucas Nussbaum Subject: imview: FTBFS: imview.o: could not read symbols: Bad value Date: Wed, 21 Mar 2012 21:41:39 +0100 Size: 2529 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Closing the bug Date: Fri, 6 Jul 2012 20:46:30 +0200 Size: 2208 URL: From gladky.anton at gmail.com Fri Jul 6 18:51:20 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Fri, 6 Jul 2012 20:51:20 +0200 Subject: Processed: your mail In-Reply-To: References: <4FF49E6A.8030801@googlemail.com> <4FF4A7B7.5090607@googlemail.com> <20120705104822.GA16430@crater2.logilab.fr> Message-ID: Hi, yade is still not uploaded on powerpc. Is powerpc at debian.org the right place to complain? Thanks. Anton 2012/7/5 Anton Gladky : > Thanks, Julien! > > It is built on powerpc already, but not yet uploaded. > > Anton > > > 2012/7/5 Julien Cristau : >> On Wed, Jul 4, 2012 at 22:29:43 +0200, Julian Taylor wrote: >> >> I've unblocked yade and overridden its urgency to high so it should get >> in testing ahead of ipython if the powerpc build gets uploaded in time. >> >> Cheers, >> Julien >> -- >> Julien Cristau >> Logilab http://www.logilab.fr/ >> Informatique scientifique & gestion de connaissances From owner at bugs.debian.org Fri Jul 6 19:06:11 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 19:06:11 +0000 Subject: Processed: notfound 660259 in 1.4.1-1 References: <1341601460-3798-bts-sthibault@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > notfound 660259 1.4.1-1 Bug #660259 [libmpich2-dev] mpich2: FTBFS: [sparc] missing files Bug #666140 [libmpich2-dev] mpich2: FTBFS: dh_install: libmpich2-3 missing files (usr/lib/libmpich.so.3*), aborting Ignoring request to alter found versions of bug #660259 to the same values previously set Ignoring request to alter found versions of bug #666140 to the same values previously set > thanks Stopping processing here. Please contact me if you need assistance. -- 660259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660259 666140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666140 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 6 19:18:05 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 19:18:05 +0000 Subject: Processed: fixed 660259 in 1.4.1-1 References: <1341602103-1302-bts-sthibault@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > fixed 660259 1.4.1-1 Bug #660259 [libmpich2-dev] mpich2: FTBFS: [sparc] missing files Bug #666140 [libmpich2-dev] mpich2: FTBFS: dh_install: libmpich2-3 missing files (usr/lib/libmpich.so.3*), aborting Marked as fixed in versions mpich2/1.4.1-1. Marked as fixed in versions mpich2/1.4.1-1. > thanks Stopping processing here. Please contact me if you need assistance. -- 660259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660259 666140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666140 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 6 19:18:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 19:18:07 +0000 Subject: Processed: fixed 660259 in 1.4.1-1 References: <1341602107-2991-bts-sthibault@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > fixed 660259 1.4.1-1 Bug #660259 [libmpich2-dev] mpich2: FTBFS: [sparc] missing files Bug #666140 [libmpich2-dev] mpich2: FTBFS: dh_install: libmpich2-3 missing files (usr/lib/libmpich.so.3*), aborting Ignoring request to alter fixed versions of bug #660259 to the same values previously set Ignoring request to alter fixed versions of bug #666140 to the same values previously set > thanks Stopping processing here. Please contact me if you need assistance. -- 660259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660259 666140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666140 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ftpmaster at ftp-master.debian.org Fri Jul 6 19:29:42 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 06 Jul 2012 19:29:42 +0000 Subject: Processing of blitz++_0.10-1_amd64.changes Message-ID: blitz++_0.10-1_amd64.changes uploaded successfully to localhost along with the files: blitz++_0.10-1.dsc blitz++_0.10.orig.tar.gz blitz++_0.10-1.debian.tar.gz libblitz0ldbl_0.10-1_amd64.deb libblitz0-dev_0.10-1_amd64.deb libblitz-doc_0.10-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Fri Jul 6 19:32:11 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 06 Jul 2012 19:32:11 +0000 Subject: blitz++_0.10-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: blitz++_0.10-1.debian.tar.gz to main/b/blitz++/blitz++_0.10-1.debian.tar.gz blitz++_0.10-1.dsc to main/b/blitz++/blitz++_0.10-1.dsc blitz++_0.10.orig.tar.gz to main/b/blitz++/blitz++_0.10.orig.tar.gz libblitz-doc_0.10-1_all.deb to main/b/blitz++/libblitz-doc_0.10-1_all.deb libblitz0-dev_0.10-1_amd64.deb to main/b/blitz++/libblitz0-dev_0.10-1_amd64.deb libblitz0ldbl_0.10-1_amd64.deb to main/b/blitz++/libblitz0ldbl_0.10-1_amd64.deb Changes: blitz++ (1:0.10-1) unstable; urgency=low . * New upstream release Closes: #679407 * debian/rules: - update for new release - add override_dh_auto_test target - regenerate configure and Makefile.am * debian/control: - add libtool, automake to BuildDepends * debian/libblitz-doc.install - modify path for html files * remove uneeded patches * add examples.patch Override entries for your package: blitz++_0.10-1.dsc - source devel libblitz-doc_0.10-1_all.deb - extra doc libblitz0-dev_0.10-1_amd64.deb - extra libdevel libblitz0ldbl_0.10-1_amd64.deb - extra libs Announcing to debian-devel-changes at lists.debian.org Closing bugs: 679407 Thank you for your contribution to Debian. From andreas at an3as.eu Fri Jul 6 19:34:01 2012 From: andreas at an3as.eu (Andreas Tille) Date: Fri, 6 Jul 2012 21:34:01 +0200 Subject: Bug#680484: gmap and scotch: error when trying to install together In-Reply-To: <1341589621.29703.18.camel@calcul8.lcmi.local> References: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> <1341589621.29703.18.camel@calcul8.lcmi.local> Message-ID: <20120706193401.GB6657@an3as.eu> On Fri, Jul 06, 2012 at 05:47:01PM +0200, trophime wrote: > > PS: for more information about the detection of file overwrite errors > > of this kind see http://edos.debian.net/file-overwrites/. > > Hi, > I just upload a fix on Debian science git. > > Hope it helps >From my perspective that's actually really helpful. Does anybody mind checking and uploading. If not I'd volunteer to do so. Kind regards Andreas. -- http://fam-tille.de From owner at bugs.debian.org Fri Jul 6 19:36:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 19:36:04 +0000 Subject: Bug#679407: marked as done (Blitz++: update to version 0.10) References: <4FEC5418.6040400@igf.fuw.edu.pl> Message-ID: Your message dated Fri, 06 Jul 2012 19:32:11 +0000 with message-id and subject line Bug#679407: fixed in blitz++ 1:0.10-1 has caused the Debian Bug report #679407, regarding Blitz++: update to version 0.10 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 679407: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679407 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Sylwester Arabas Subject: Blitz++: update to version 0.10 Date: Thu, 28 Jun 2012 14:54:48 +0200 Size: 2564 URL: -------------- next part -------------- An embedded message was scrubbed... From: Christophe Trophime Subject: Bug#679407: fixed in blitz++ 1:0.10-1 Date: Fri, 06 Jul 2012 19:32:11 +0000 Size: 5860 URL: From andreas at an3as.eu Fri Jul 6 19:34:01 2012 From: andreas at an3as.eu (Andreas Tille) Date: Fri, 6 Jul 2012 21:34:01 +0200 Subject: Bug#680484: gmap and scotch: error when trying to install together In-Reply-To: <1341589621.29703.18.camel@calcul8.lcmi.local> References: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> <1341589621.29703.18.camel@calcul8.lcmi.local> Message-ID: <20120706193401.GB6657@an3as.eu> On Fri, Jul 06, 2012 at 05:47:01PM +0200, trophime wrote: > > PS: for more information about the detection of file overwrite errors > > of this kind see http://edos.debian.net/file-overwrites/. > > Hi, > I just upload a fix on Debian science git. > > Hope it helps >From my perspective that's actually really helpful. Does anybody mind checking and uploading. If not I'd volunteer to do so. Kind regards Andreas. -- http://fam-tille.de From owner at bugs.debian.org Fri Jul 6 19:48:09 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 19:48:09 +0000 Subject: Processed: found 660259 in References: <1341603838-926-bts-sthibault@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > found 660259 Bug #660259 [libmpich2-dev] mpich2: FTBFS: [sparc] missing files Bug #666140 [libmpich2-dev] mpich2: FTBFS: dh_install: libmpich2-3 missing files (usr/lib/libmpich.so.3*), aborting No longer marked as fixed in versions mpich2/1.4.1-1. No longer marked as fixed in versions mpich2/1.4.1-1. > thanks Stopping processing here. Please contact me if you need assistance. -- 660259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660259 666140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666140 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 6 19:48:12 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 19:48:12 +0000 Subject: Processed: found 660259 in 1.4.1-2 References: <1341603846-540-bts-sthibault@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > found 660259 1.4.1-2 Bug #660259 [libmpich2-dev] mpich2: FTBFS: [sparc] missing files Bug #666140 [libmpich2-dev] mpich2: FTBFS: dh_install: libmpich2-3 missing files (usr/lib/libmpich.so.3*), aborting Marked as found in versions mpich2/1.4.1-2. Marked as found in versions mpich2/1.4.1-2. > thanks Stopping processing here. Please contact me if you need assistance. -- 660259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660259 666140: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666140 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From Pierre.Saramito at imag.fr Fri Jul 6 19:32:15 2012 From: Pierre.Saramito at imag.fr (Saramito Pierre) Date: Fri, 6 Jul 2012 21:32:15 +0200 Subject: HELP needed for uploading a new version of the Rheolef package Message-ID: <20120706193215.GA20532@mobydick> Dear all debian maintainers, I just commit with svn a new release of the debianisation of the rheolef package. It is associated to a new upstream release 6.2 of the source package: http://www-ljk.imag.fr/membres/Pierre.Saramito/rheolef/rheolef-6.2.tar.gz Could you please upload it in debian ? Thank you by advance, Pierre -- Pierre.Saramito at imag.fr Directeur de Recherche CNRS Laboratoire Jean Kuntzmann, Grenoble, France http://www-ljk.imag.fr/membres/Pierre.Saramito From owner at bugs.debian.org Fri Jul 6 20:09:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 06 Jul 2012 20:09:07 +0000 Subject: Processed: tagging 680096 References: <1341605152-2559-bts-sebastien.villemot@ens.fr> Message-ID: Processing commands for control at bugs.debian.org: > tags 680096 + pending Bug #680096 [libatlas3-base] libblas3: Shared library for BLAS level3 (dgemm) is broken on WHEEZY/powerpc Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 680096: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680096 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Sat Jul 7 11:03:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 07 Jul 2012 11:03:04 +0000 Subject: Processed: affects 617613 References: <1341658703-1115-bts-dktrkranz@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > affects 617613 - ftp.debian.org Bug #617613 [ftp.debian.org,freecad] freecad: links with both GPL-licensed and GPL-incompatible libraries Removed indication that 617613 affects > thanks Stopping processing here. Please contact me if you need assistance. -- 617613: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=617613 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Sat Jul 7 11:12:15 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 07 Jul 2012 11:12:15 +0000 Subject: Processed: affects 617613 References: <1341659273-1494-bts-dktrkranz@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > affects 617613 = freecad Bug #617613 [ftp.debian.org,freecad] freecad: links with both GPL-licensed and GPL-incompatible libraries Added indication that 617613 affects freecad > thanks Stopping processing here. Please contact me if you need assistance. -- 617613: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=617613 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From karin_elisabeth.langtind at getmail.no Sat Jul 7 11:38:42 2012 From: karin_elisabeth.langtind at getmail.no (karin_elisabeth.langtind at getmail.no) Date: Sat, 07 Jul 2012 12:38:42 +0100 Subject: =?iso-8859-4?Q?aizdevumu_pied=E0v=E0jums?= Message-ID: <73409f6eb1b1.4ff82dd2@getmail.no> labdien Es Sir Bill John from Jubilee Finance Management, es esmu ?eit, lai iepaz?stin?t j?s ar aizdevumu programmu, kas ?auj mums, lai pal?dz?tu cilv?kiem finansi?las gr?t?bas un nepiecie?ams finansi?ls atbalsts. Jums ir nepiecie?ams viegli kred?tu? Te n?k finansi?lu pal?dz?bu ar pie?emamu procentu likmi 3% Ja Jums ir interese ieg?t aizdevumu, l?dzu aizpildiet re?istr?cijas formu zem?k. (1) Pilns nosaukums: (2) aizdevuma summa, kas nepiecie?ama: (3) ilgums aizdevums: (4) Valsts: (5) T?lru?a numurs: ? Sazinieties ar mums ?odien pa e-pastu skaits: jubilee.fin_mgt @ WSS-id.org Gaid?m J?su atbildi uz ?o e-pastu, lai m?s var?tu apstr?d?t j?su kred?ta fondu p?c iesp?jas ?tr?k. paldies Sir Bill John Jubilee Finance Management Aizdevuma noform??ana departaments -------------- next part -------------- An HTML attachment was scrubbed... URL: From jivara75 at orange.fr Sat Jul 7 13:02:07 2012 From: jivara75 at orange.fr (cok) Date: Sat, 7 Jul 2012 21:02:07 +0800 Subject: =?gb2312?B?KEFEKSC85tawuaTX96OsyKvWsMrVyOsgoaGhobWrzfXVxg==?= =?gb2312?B?ufG41dTiytzBy9bYtLSjrMTEwO+7ubjSx+G+2c39tq+jrMv70djXxQ==?= =?gb2312?B?ueOzoS3KpsPFLbuqyb0tueM=?= Message-ID: <20120707210214585813@orange.fr> An HTML attachment was scrubbed... URL: From noreply at release.debian.org Sat Jul 7 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:15 +0000 Subject: rivet 1.8.0-1 MIGRATED to testing Message-ID: FYI: The status of the rivet source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 1.8.0-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:15 +0000 Subject: pythia8 8.1.65-1 MIGRATED to testing Message-ID: FYI: The status of the pythia8 source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 8.1.65-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:15 +0000 Subject: root-system 5.34.00-1 MIGRATED to testing Message-ID: FYI: The status of the root-system source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 5.34.00-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:14 +0000 Subject: fastjet 3.0.2+dfsg-2 MIGRATED to testing Message-ID: FYI: The status of the fastjet source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 3.0.2+dfsg-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:17 +0000 Subject: yorick-cubeview 1.6-2 MIGRATED to testing Message-ID: FYI: The status of the yorick-cubeview source package in Debian's testing distribution has changed. Previous version: 1.6-1 Current version: 1.6-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:17 +0000 Subject: yade 0.80.1-2 MIGRATED to testing Message-ID: FYI: The status of the yade source package in Debian's testing distribution has changed. Previous version: 0.80.1-1 Current version: 0.80.1-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:14 +0000 Subject: hepmc 2.06.09-1 MIGRATED to testing Message-ID: FYI: The status of the hepmc source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 2.06.09-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sat Jul 7 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sat, 07 Jul 2012 16:39:15 +0000 Subject: opencv 2.3.1-11 MIGRATED to testing Message-ID: FYI: The status of the opencv source package in Debian's testing distribution has changed. Previous version: 2.3.1-10 Current version: 2.3.1-11 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From owner at bugs.debian.org Sun Jul 8 04:33:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Jul 2012 04:33:07 +0000 Subject: Processed: tagging 652309, tagging 652310 References: <1341721779-750-bts-diocles@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > tags 652309 + wheezy sid Bug #652309 {Done: hazelsct at debian.org ("Adam C. Powell, IV")} [src:spooles] Rebuild with mpi-defaults >= 1.0 Added tag(s) sid and wheezy. > tags 652310 + wheezy sid Bug #652310 {Done: hazelsct at debian.org ("Adam C. Powell, IV")} [src:hypre] Rebuild with mpi-defaults >= 1.0 Added tag(s) sid and wheezy. > thanks Stopping processing here. Please contact me if you need assistance. -- 652309: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=652309 652310: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=652310 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From touko.korpela at iki.fi Sun Jul 8 10:14:26 2012 From: touko.korpela at iki.fi (Touko Korpela) Date: Sun, 08 Jul 2012 13:14:26 +0300 Subject: Bug#680733: liblapack3: Updating to 3.4.1-4 prints dpkg warnings Message-ID: <20120708101426.6038.80507.reportbug@lisko> Package: liblapack3 Version: 3.4.1-4 Severity: important I got warnings from dpkg when updating from 3.4.1-3 to 3.4.1-4 Dpkg version is 1.16.4.3 from wheezy (sid has more recent dpkg) Is this bug in lapack or in dpkg? -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (700, 'testing'), (600, 'unstable'), (500, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages liblapack3 depends on: ii debconf [debconf-2.0] 1.5.44 ii libblas3 [libblas.so.3] 1.2.20110419-3 ii libc6 2.13-33 ii libgcc1 1:4.7.1-2 ii libgfortran3 4.7.1-2 ii libquadmath0 4.7.1-2 liblapack3 recommends no packages. liblapack3 suggests no packages. -- no debconf information -------------- next part -------------- ... reparing to replace liblapack3 3.4.1-3 (using .../liblapack3_3.4.1-4_amd64.deb) ... update-alternatives: error: no alternatives for liblapack.so.3gf. dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg: ... it looks like that went OK. Unpacking replacement liblapack3 ... Preparing to replace liblapack3gf 3.4.1-3 (using .../liblapack3gf_3.4.1-4_all.deb) ... update-alternatives: error: no alternatives for liblapack.so.3gf. dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg: ... it looks like that went OK. Unpacking replacement liblapack3gf ... Processing triggers for man-db ... ... Setting up liblapack3 (3.4.1-4) ... update-alternatives: using /usr/lib/lapack/liblapack.so.3 to provide /usr/lib/liblapack.so.3 (liblapack.so.3) in auto mode. Setting up liblapack3gf (3.4.1-4) ... From ftpmaster at ftp-master.debian.org Sun Jul 8 10:23:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 08 Jul 2012 10:23:09 +0000 Subject: Processing of lapack_3.4.1-5_amd64.changes Message-ID: lapack_3.4.1-5_amd64.changes uploaded successfully to localhost along with the files: lapack_3.4.1-5.dsc lapack_3.4.1-5.debian.tar.gz liblapack3gf_3.4.1-5_all.deb liblapack-doc_3.4.1-5_all.deb liblapack-doc-man_3.4.1-5_all.deb liblapack3_3.4.1-5_amd64.deb liblapacke_3.4.1-5_amd64.deb liblapacke-dev_3.4.1-5_amd64.deb liblapack-dev_3.4.1-5_amd64.deb liblapack-pic_3.4.1-5_amd64.deb liblapack-test_3.4.1-5_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From owner at bugs.debian.org Sun Jul 8 10:27:24 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Jul 2012 10:27:24 +0000 Subject: Bug#680733: marked as done (liblapack3: Updating to 3.4.1-4 prints dpkg warnings) References: <874npik0tb.fsf@brouzouf.villemot.name> <20120708101426.6038.80507.reportbug@lisko> Message-ID: Your message dated Sun, 08 Jul 2012 12:24:32 +0200 with message-id <874npik0tb.fsf at brouzouf.villemot.name> and subject line Re: Bug#680733: liblapack3: Updating to 3.4.1-4 prints dpkg warnings has caused the Debian Bug report #680733, regarding liblapack3: Updating to 3.4.1-4 prints dpkg warnings to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680733: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680733 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Touko Korpela Subject: liblapack3: Updating to 3.4.1-4 prints dpkg warnings Date: Sun, 08 Jul 2012 13:14:26 +0300 Size: 4730 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?Q?S=C3=A9bastien_Villemot?= Subject: Re: Bug#680733: liblapack3: Updating to 3.4.1-4 prints dpkg warnings Date: Sun, 08 Jul 2012 12:24:32 +0200 Size: 4698 URL: From ftpmaster at ftp-master.debian.org Sun Jul 8 10:32:48 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 08 Jul 2012 10:32:48 +0000 Subject: lapack_3.4.1-5_amd64.changes REJECTED Message-ID: Reject Reasons: md5sum for /srv/ftp-master.debian.org/ftp/pool/main/l/lapack/lapack_3.4.1.orig.tar.bz2 doesn't match lapack_3.4.1-5.dsc. size for /srv/ftp-master.debian.org/ftp/pool/main/l/lapack/lapack_3.4.1.orig.tar.bz2 doesn't match lapack_3.4.1-5.dsc. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From invernomuto at paranoici.org Sun Jul 8 10:37:39 2012 From: invernomuto at paranoici.org (Francesco Poli (wintermute)) Date: Sun, 08 Jul 2012 12:37:39 +0200 Subject: Bug#680738: salome-gui: links with both GPL-licensed and GPL-incompatible libraries Message-ID: <20120708103739.8265.91191.reportbug@homebrew> Package: salome-gui Version: 6.5.0-1 Severity: serious Justification: Policy 2.2.1 Hello Debian Science Maintainers, thanks for your effort to reintroduce SALOME into Debian. However, it seems to me that one of the licensing issues that affected the previous package [1] is still present in the current salome-gui package. [1] http://bugs.debian.org/619662 Indeed, salome-gui is licensed under the terms of the GNU LGPL v2.1, but links with libcos4-1/libomniorb4-1, which include [2] files released under the terms of the GNU GPL v2 or later. [2] http://packages.debian.org/changelogs/pool/main/o/omniorb-dfsg/current/copyright This means that package salome-gui is effectively under the GNU GPL (v2 or later). On the other hand, salome-gui links with liboce-* packages, which are released under the terms of the OCTPL v6.3 [3], a GPL-incompatible license. [3] http://packages.debian.org/changelogs/pool/main/o/oce/current/copyright As a consequence, I would say that salome-gui (the binary package) is currently undistributable, as it links with both a GPLv2-licensed library and a GPLv2-incompatible one. Possible solutions, in descending order of desirability: (A) Open CASCADE S.A.S. should be contacted and persuaded to re-license Open CASCADE Technology under GPLv2-and-v3-compatible terms. (B) liboce-* packages should be substituted with a GPLv2-and-v3-compatible replacement, if any is available. (C) omniORB copyright holders should be asked to add license exceptions that give permission to link their work with code released under the OCTPL. As summarized in a recent thread on debian-science and debian-legal [4], I am trying to push in the direction of solution (A), but I need help in persuading Open CASCADE S.A.S. to switch to the GNU LGPL v2.1: once again, please help! [4] https://lists.debian.org/debian-legal/2012/06/msg00038.html From ftpmaster at ftp-master.debian.org Sun Jul 8 12:13:20 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 08 Jul 2012 12:13:20 +0000 Subject: Incomplete upload found in Debian upload queue Message-ID: Probably you are the uploader of the following file(s) in the Debian upload queue directory: lapack_3.4.1-5.debian.tar.gz lapack_3.4.1-5.dsc This looks like an upload, but a .changes file is missing, so the job cannot be processed. If no .changes file arrives within 23:24:59, the files will be deleted. If you didn't upload those files, please just ignore this message. Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 8 12:18:23 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 08 Jul 2012 12:18:23 +0000 Subject: Processing of lapack_3.4.1-5_amd64.changes Message-ID: lapack_3.4.1-5_amd64.changes uploaded successfully to localhost along with the files: lapack_3.4.1-5.dsc lapack_3.4.1-5.debian.tar.gz liblapack3gf_3.4.1-5_all.deb liblapack-doc_3.4.1-5_all.deb liblapack-doc-man_3.4.1-5_all.deb liblapack3_3.4.1-5_amd64.deb liblapacke_3.4.1-5_amd64.deb liblapacke-dev_3.4.1-5_amd64.deb liblapack-dev_3.4.1-5_amd64.deb liblapack-pic_3.4.1-5_amd64.deb liblapack-test_3.4.1-5_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 8 12:32:25 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 08 Jul 2012 12:32:25 +0000 Subject: lapack_3.4.1-5_amd64.changes ACCEPTED into unstable Message-ID: Accepted: lapack_3.4.1-5.debian.tar.gz to main/l/lapack/lapack_3.4.1-5.debian.tar.gz lapack_3.4.1-5.dsc to main/l/lapack/lapack_3.4.1-5.dsc liblapack-dev_3.4.1-5_amd64.deb to main/l/lapack/liblapack-dev_3.4.1-5_amd64.deb liblapack-doc-man_3.4.1-5_all.deb to main/l/lapack/liblapack-doc-man_3.4.1-5_all.deb liblapack-doc_3.4.1-5_all.deb to main/l/lapack/liblapack-doc_3.4.1-5_all.deb liblapack-pic_3.4.1-5_amd64.deb to main/l/lapack/liblapack-pic_3.4.1-5_amd64.deb liblapack-test_3.4.1-5_amd64.deb to main/l/lapack/liblapack-test_3.4.1-5_amd64.deb liblapack3_3.4.1-5_amd64.deb to main/l/lapack/liblapack3_3.4.1-5_amd64.deb liblapack3gf_3.4.1-5_all.deb to main/l/lapack/liblapack3gf_3.4.1-5_all.deb liblapacke-dev_3.4.1-5_amd64.deb to main/l/lapack/liblapacke-dev_3.4.1-5_amd64.deb liblapacke_3.4.1-5_amd64.deb to main/l/lapack/liblapacke_3.4.1-5_amd64.deb Changes: lapack (3.4.1-5) unstable; urgency=low . * liblapack-test: move to devel/extra, to reflect override * liblapacke_no_matgen.patch: new patch; prevents inclusion of wrappers for MATGEN functions in liblapacke (Closes: #680428) * liblapack-doc: add missing "Files" field in doc-base entry Override entries for your package: lapack_3.4.1-5.dsc - source libs liblapack-dev_3.4.1-5_amd64.deb - optional libdevel liblapack-doc-man_3.4.1-5_all.deb - optional doc liblapack-doc_3.4.1-5_all.deb - optional doc liblapack-pic_3.4.1-5_amd64.deb - optional libdevel liblapack-test_3.4.1-5_amd64.deb - extra devel liblapack3_3.4.1-5_amd64.deb - optional libs liblapack3gf_3.4.1-5_all.deb - optional oldlibs liblapacke-dev_3.4.1-5_amd64.deb - optional libdevel liblapacke_3.4.1-5_amd64.deb - optional libs Announcing to debian-devel-changes at lists.debian.org Closing bugs: 680428 Thank you for your contribution to Debian. From owner at bugs.debian.org Sun Jul 8 12:33:28 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Jul 2012 12:33:28 +0000 Subject: Bug#680428: marked as done (liblapacke-dev: Can not link against liblapacke) References: <20120705193852.GA5830@type.eduroam.ufrgs.br> Message-ID: Your message dated Sun, 08 Jul 2012 12:32:25 +0000 with message-id and subject line Bug#680428: fixed in lapack 3.4.1-5 has caused the Debian Bug report #680428, regarding liblapacke-dev: Can not link against liblapacke to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680428: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680428 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Samuel Thibault Subject: liblapacke-dev: Can not link against liblapacke Date: Thu, 5 Jul 2012 16:38:52 -0300 Size: 3517 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?q?S=C3=A9bastien_Villemot?= Subject: Bug#680428: fixed in lapack 3.4.1-5 Date: Sun, 08 Jul 2012 12:32:25 +0000 Size: 7856 URL: From gdv87 at libero.it Sun Jul 8 16:16:23 2012 From: gdv87 at libero.it (Giuseppe de Vito) Date: Sun, 08 Jul 2012 18:16:23 +0200 Subject: Bug#680777: libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Message-ID: <20120708161623.22787.95846.reportbug@localhost> Package: libblas3gf Version: 1.2.20110419-5 Severity: critical Justification: breaks unrelated software Dear Maintainer, gimp is segfaulting if 'libblas3gf' is installed. If 'libblas3gf' is not installed, 'libgegl-0.2-0' complains about it being missing if I execute gimp (but gimp runs fine none-the-less) with this error message: "GEGL-geglmodule.c-Message: Module '/usr/lib/x86_64-linux-gnu/gegl-0.2/matting- levin.so' load error: libblas.so.3gf" This is the output of "dpkg -l libblas*": Name Version Architecture Description un libblas.so.3 (nessuna descrizione disponibile) un libblas.so.3gf (nessuna descrizione disponibile) ii libblas3 1.2.20110419-5 amd64 Basic Linear Algebra Reference implementations, shared library ii libblas3gf 1.2.20110419-5 all Transitional package for libblas Greets Giuseppe de Vito -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.4-4.slh.4-aptosid-amd64 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libblas3gf depends on: ii libblas3 1.2.20110419-5 libblas3gf recommends no packages. libblas3gf suggests no packages. -- no debconf information From noreply at release.debian.org Sun Jul 8 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sun, 08 Jul 2012 16:39:15 +0000 Subject: lapack 3.4.1-4 MIGRATED to testing Message-ID: FYI: The status of the lapack source package in Debian's testing distribution has changed. Previous version: 3.4.1-3 Current version: 3.4.1-4 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Sun Jul 8 16:39:16 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sun, 08 Jul 2012 16:39:16 +0000 Subject: openblas 0.1.1-5 MIGRATED to testing Message-ID: FYI: The status of the openblas source package in Debian's testing distribution has changed. Previous version: 0.1.1-4 Current version: 0.1.1-5 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From sebastien.villemot at ens.fr Sun Jul 8 17:57:47 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Sun, 08 Jul 2012 19:57:47 +0200 Subject: Bug#680777: libblas3gf: gimp is segfaulting if 'libblas3gf' is installed In-Reply-To: <20120708161623.22787.95846.reportbug@localhost> (Giuseppe de Vito's message of "Sun, 08 Jul 2012 18:16:23 +0200") References: <20120708161623.22787.95846.reportbug@localhost> Message-ID: <87fw92i19g.fsf@brouzouf.villemot.name> severity 680777 important tags 680777 + moreinfo thanks Giuseppe de Vito writes: > Package: libblas3gf > Version: 1.2.20110419-5 > Severity: critical > Justification: breaks unrelated software > > Dear Maintainer, > gimp is segfaulting if 'libblas3gf' is installed. If 'libblas3gf' is not > installed, 'libgegl-0.2-0' complains about it being missing if I execute gimp > (but gimp runs fine none-the-less) with this error message: > "GEGL-geglmodule.c-Message: Module '/usr/lib/x86_64-linux-gnu/gegl-0.2/matting- > levin.so' load error: libblas.so.3gf" > This is the output of "dpkg -l libblas*": Can you please dump the output of "update-alternatives --display libblas.so.3"? You are probably hit by #673061, which is actually an openblas bug. Thanks, -- S?bastien Villemot Researcher in Economics & Debian Maintainer http://www.dynare.org/sebastien Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From owner at bugs.debian.org Sun Jul 8 18:00:18 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Jul 2012 18:00:18 +0000 Subject: Processed: Re: Bug#680777: libblas3gf: gimp is segfaulting if 'libblas3gf' is installed References: <87fw92i19g.fsf@brouzouf.villemot.name> Message-ID: Processing commands for control at bugs.debian.org: > severity 680777 important Bug #680777 [libblas3gf] libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Severity set to 'important' from 'critical' > tags 680777 + moreinfo Bug #680777 [libblas3gf] libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Added tag(s) moreinfo. > thanks Stopping processing here. Please contact me if you need assistance. -- 680777: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680777 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ak.miller at auckland.ac.nz Sun Jul 8 21:31:24 2012 From: ak.miller at auckland.ac.nz (Andrew Miller) Date: Mon, 09 Jul 2012 09:31:24 +1200 Subject: Bug#680878: sundials source package lacks -dbg package Message-ID: <4FF9FC2C.7060906@auckland.ac.nz> Package: sundials Version: 2.5.0-1 Owner: ak.miller at auckland.ac.nz Severity: important There is no debug package built for SUNDIALS, and this makes the development package difficult to use, as sometimes problems in other program manifest themselves as a segfault in the SUNDIALS code, and without debugging symbols, it can be difficult to work out what exactly went wrong. From ak.miller at auckland.ac.nz Sun Jul 8 21:33:58 2012 From: ak.miller at auckland.ac.nz (Andrew Miller) Date: Mon, 09 Jul 2012 09:33:58 +1200 Subject: Bug#680880: SUNDIALS description misspells suite as suit Message-ID: <4FF9FCC6.8010705@auckland.ac.nz> Package: sundials Severity: minor Owner: ak.miller at auckland.ac.nz The SUNDIALS package control file misspells suite as suit in several places. From ak.miller at auckland.ac.nz Sun Jul 8 21:40:40 2012 From: ak.miller at auckland.ac.nz (Andrew Miller) Date: Mon, 09 Jul 2012 09:40:40 +1200 Subject: Bug#680881: SUNDIALS description misspells suite as suit Message-ID: <4FF9FE58.8030509@auckland.ac.nz> Package: sundials Severity: minor Owner: ak.miller at auckland.ac.nz Version: 2.5.0-1 The SUNDIALS package control file misspells suite as suit in several places. From sylvestre at debian.org Sun Jul 8 21:43:51 2012 From: sylvestre at debian.org (Sylvestre Ledru) Date: Sun, 08 Jul 2012 15:43:51 -0600 Subject: Bug#680878: sundials source package lacks -dbg package In-Reply-To: <4FF9FC2C.7060906@auckland.ac.nz> References: <4FF9FC2C.7060906@auckland.ac.nz> Message-ID: <4FF9FF17.80508@debian.org> severity 680878 normal thanks Le 08/07/2012 15:31, Andrew Miller a ?crit : > > There is no debug package built for SUNDIALS, and this makes the > development package difficult to use, as sometimes problems in other > program manifest themselves as a segfault in the SUNDIALS code, and > without debugging symbols, it can be difficult to work out what > exactly went wrong. While I agree it is missing, I don't think it is "important" as severity. Sylvestre From owner at bugs.debian.org Sun Jul 8 21:45:14 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Jul 2012 21:45:14 +0000 Subject: Processed: Re: Bug#680878: sundials source package lacks -dbg package References: <4FF9FF17.80508@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > severity 680878 normal Bug #680878 [sundials] sundials source package lacks -dbg package Severity set to 'normal' from 'important' > thanks Stopping processing here. Please contact me if you need assistance. -- 680878: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680878 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Sun Jul 8 22:00:34 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 08 Jul 2012 22:00:34 +0000 Subject: Processed: Merge References: <4FF9FF6B.6000502@auckland.ac.nz> Message-ID: Processing commands for control at bugs.debian.org: > merge 680880 680881 Bug #680880 [sundials] SUNDIALS description misspells suite as suit Bug #680880 [sundials] SUNDIALS description misspells suite as suit There is no source info for the package 'sundials' at version '2.5.0-1' with architecture '' Unable to make a source version for version '2.5.0-1' Marked as found in versions 2.5.0-1. Bug #680881 [sundials] SUNDIALS description misspells suite as suit Merged 680880 680881 > End of message, stopping processing here. Please contact me if you need assistance. -- 680880: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680880 680881: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680881 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Mon Jul 9 02:51:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 09 Jul 2012 02:51:06 +0000 Subject: Processed: closing 503861 References: <20120709024902.DCDB08378@luknote> Message-ID: Processing commands for control at bugs.debian.org: > #closed by scheduling binNMUs > close 503861 Bug #503861 [apertium] echo apple|apertium en-es: Error: Unknown error matching regexp (code -16) Marked Bug as done > thanks Stopping processing here. Please contact me if you need assistance. -- 503861: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503861 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From jet.holloway at gmail.com Mon Jul 9 10:39:35 2012 From: jet.holloway at gmail.com (Jet Holloway) Date: Mon, 09 Jul 2012 20:39:35 +1000 Subject: Bug#680931: libarmadillo-dev: trivial program fails to compile Message-ID: <20120709103935.20447.93972.reportbug@WIZARD> Package: libarmadillo-dev Version: 1:3.2.3+dfsg-1 Severity: grave Tags: upstream Justification: renders package unusable Dear Maintainer, I just upgraded libarmadillo-dev and libarmadillo3 from version 3.2.2+dfsg-1 to 3.2.3+dfsg-1, which caused a program I was working on to fail to compile. When I removed 3.2.3 and reinstalled 3.2.2 the problem disappeared. The following trivial program also causes the error: #include int main() { return 0; } When I try to compile this program with "g++ armadillo_bug.cpp", I get these errors: In file included from /usr/include/armadillo:141:0, from armadillo_bug.cpp:2: /usr/include/armadillo_bits/Mat_bones.hpp:545:26: error: no members matching ?arma::Mat::operator=? in ?class arma::Mat? /usr/include/armadillo_bits/Mat_bones.hpp:546:27: error: no members matching ?arma::Mat::operator()? in ?class arma::Mat? In file included from /usr/include/armadillo:142:0, from armadillo_bug.cpp:2: /usr/include/armadillo_bits/Col_bones.hpp:175:27: error: no members matching ?arma::Col::operator()? in ?class arma::Col? In file included from /usr/include/armadillo:143:0, from armadillo_bug.cpp:2: /usr/include/armadillo_bits/Row_bones.hpp:173:27: error: no members matching ?arma::Row::operator()? in ?class arma::Row? I am using gcc 4.7.1-2. I have also downloaded armadillo-3.2.3.tar.gz from the armadillo website and tried including that header file in the trivial program. This also failed to compile. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-rt-amd64 (SMP w/8 CPU cores; PREEMPT) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libarmadillo-dev depends on: ii libarmadillo3 1:3.2.3+dfsg-1 libarmadillo-dev recommends no packages. Versions of packages libarmadillo-dev suggests: pn libitpp-dev -- no debconf information From conradsand at ieee.org Mon Jul 9 12:17:16 2012 From: conradsand at ieee.org (Conrad Sanderson) Date: Mon, 9 Jul 2012 22:17:16 +1000 Subject: Bug#680931: libarmadillo-dev: trivial program fails to compile In-Reply-To: <20120709103935.20447.93972.reportbug@WIZARD> References: <20120709103935.20447.93972.reportbug@WIZARD> Message-ID: This is not a bug in Armadillo, but rather a bug (regression) in GCC 4.7.0 and 4.7.1. The relevant Armadillo code follows the C++ standard. Code using Armadillo 3.2.3 compiles fine with earlier versions of GCC (4.4, 4.5 and 4.6) as well as CLang 3.0. As such, I suggest filing a bug against the GCC package in Debian. There is a related upstream GCC bug, but there seems to be no progress on it: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53549 On 9 July 2012 20:39, Jet Holloway wrote: > Package: libarmadillo-dev > Version: 1:3.2.3+dfsg-1 > Severity: grave > Tags: upstream > Justification: renders package unusable > > Dear Maintainer, > > I just upgraded libarmadillo-dev and libarmadillo3 from version 3.2.2+dfsg-1 > to 3.2.3+dfsg-1, which caused a program I was working on to fail to compile. > When I removed 3.2.3 and reinstalled 3.2.2 the problem disappeared. > > > The following trivial program also causes the error: > #include > int main() > { > return 0; > } > > > When I try to compile this program with "g++ armadillo_bug.cpp", I get these > errors: > > In file included from /usr/include/armadillo:141:0, > from armadillo_bug.cpp:2: > /usr/include/armadillo_bits/Mat_bones.hpp:545:26: error: no members matching ?arma::Mat::operator=? in ?class arma::Mat? > /usr/include/armadillo_bits/Mat_bones.hpp:546:27: error: no members matching ?arma::Mat::operator()? in ?class arma::Mat? > In file included from /usr/include/armadillo:142:0, > from armadillo_bug.cpp:2: > /usr/include/armadillo_bits/Col_bones.hpp:175:27: error: no members matching ?arma::Col::operator()? in ?class arma::Col? > In file included from /usr/include/armadillo:143:0, > from armadillo_bug.cpp:2: > /usr/include/armadillo_bits/Row_bones.hpp:173:27: error: no members matching ?arma::Row::operator()? in ?class arma::Row? > > > I am using gcc 4.7.1-2. > I have also downloaded armadillo-3.2.3.tar.gz from the armadillo website and > tried including that header file in the trivial program. This also failed to > compile. > > > -- System Information: > Debian Release: wheezy/sid > APT prefers testing > APT policy: (500, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.2.0-2-rt-amd64 (SMP w/8 CPU cores; PREEMPT) > Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages libarmadillo-dev depends on: > ii libarmadillo3 1:3.2.3+dfsg-1 > > libarmadillo-dev recommends no packages. > > Versions of packages libarmadillo-dev suggests: > pn libitpp-dev > > -- no debconf information > > > From conradsand at ieee.org Mon Jul 9 12:17:16 2012 From: conradsand at ieee.org (Conrad Sanderson) Date: Mon, 9 Jul 2012 22:17:16 +1000 Subject: Bug#680931: libarmadillo-dev: trivial program fails to compile In-Reply-To: <20120709103935.20447.93972.reportbug@WIZARD> References: <20120709103935.20447.93972.reportbug@WIZARD> Message-ID: This is not a bug in Armadillo, but rather a bug (regression) in GCC 4.7.0 and 4.7.1. The relevant Armadillo code follows the C++ standard. Code using Armadillo 3.2.3 compiles fine with earlier versions of GCC (4.4, 4.5 and 4.6) as well as CLang 3.0. As such, I suggest filing a bug against the GCC package in Debian. There is a related upstream GCC bug, but there seems to be no progress on it: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53549 On 9 July 2012 20:39, Jet Holloway wrote: > Package: libarmadillo-dev > Version: 1:3.2.3+dfsg-1 > Severity: grave > Tags: upstream > Justification: renders package unusable > > Dear Maintainer, > > I just upgraded libarmadillo-dev and libarmadillo3 from version 3.2.2+dfsg-1 > to 3.2.3+dfsg-1, which caused a program I was working on to fail to compile. > When I removed 3.2.3 and reinstalled 3.2.2 the problem disappeared. > > > The following trivial program also causes the error: > #include > int main() > { > return 0; > } > > > When I try to compile this program with "g++ armadillo_bug.cpp", I get these > errors: > > In file included from /usr/include/armadillo:141:0, > from armadillo_bug.cpp:2: > /usr/include/armadillo_bits/Mat_bones.hpp:545:26: error: no members matching ?arma::Mat::operator=? in ?class arma::Mat? > /usr/include/armadillo_bits/Mat_bones.hpp:546:27: error: no members matching ?arma::Mat::operator()? in ?class arma::Mat? > In file included from /usr/include/armadillo:142:0, > from armadillo_bug.cpp:2: > /usr/include/armadillo_bits/Col_bones.hpp:175:27: error: no members matching ?arma::Col::operator()? in ?class arma::Col? > In file included from /usr/include/armadillo:143:0, > from armadillo_bug.cpp:2: > /usr/include/armadillo_bits/Row_bones.hpp:173:27: error: no members matching ?arma::Row::operator()? in ?class arma::Row? > > > I am using gcc 4.7.1-2. > I have also downloaded armadillo-3.2.3.tar.gz from the armadillo website and > tried including that header file in the trivial program. This also failed to > compile. > > > -- System Information: > Debian Release: wheezy/sid > APT prefers testing > APT policy: (500, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.2.0-2-rt-amd64 (SMP w/8 CPU cores; PREEMPT) > Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages libarmadillo-dev depends on: > ii libarmadillo3 1:3.2.3+dfsg-1 > > libarmadillo-dev recommends no packages. > > Versions of packages libarmadillo-dev suggests: > pn libitpp-dev > > -- no debconf information > > > From akumar at debian.org Mon Jul 9 13:04:56 2012 From: akumar at debian.org (Kumar Appaiah) Date: Mon, 9 Jul 2012 08:04:56 -0500 Subject: Bug#680931: libarmadillo-dev: trivial program fails to compile In-Reply-To: References: <20120709103935.20447.93972.reportbug@WIZARD> Message-ID: <20120709130456.GA16124@bluemoon.alumni.iitm.ac.in> reassign 680931 g++-4.7 4.7.1-2 forwarded 680931 http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53549 tags 680931 + upstream thanks Dear Jet, I am reassigning this bug to gcc. The forwarded bug report is referred to above. Rearranging posts to make sense: On Mon, Jul 09, 2012 at 10:17:16PM +1000, Conrad Sanderson wrote: > On 9 July 2012 20:39, Jet Holloway wrote: > > Dear Maintainer, > > > > I just upgraded libarmadillo-dev and libarmadillo3 from version 3.2.2+dfsg-1 > > to 3.2.3+dfsg-1, which caused a program I was working on to fail to compile. > > When I removed 3.2.3 and reinstalled 3.2.2 the problem disappeared. > > > > > > The following trivial program also causes the error: > > #include > > int main() > > { > > return 0; > > } > > > > > > When I try to compile this program with "g++ armadillo_bug.cpp", I get these > > errors: > > > > In file included from /usr/include/armadillo:141:0, > > from armadillo_bug.cpp:2: > > /usr/include/armadillo_bits/Mat_bones.hpp:545:26: error: no members matching ?arma::Mat::operator=? in ?class arma::Mat? > > /usr/include/armadillo_bits/Mat_bones.hpp:546:27: error: no members matching ?arma::Mat::operator()? in ?class arma::Mat? > > In file included from /usr/include/armadillo:142:0, > > from armadillo_bug.cpp:2: > > /usr/include/armadillo_bits/Col_bones.hpp:175:27: error: no members matching ?arma::Col::operator()? in ?class arma::Col? > > In file included from /usr/include/armadillo:143:0, > > from armadillo_bug.cpp:2: > > /usr/include/armadillo_bits/Row_bones.hpp:173:27: error: no members matching ?arma::Row::operator()? in ?class arma::Row? > > > > > > I am using gcc 4.7.1-2. > > I have also downloaded armadillo-3.2.3.tar.gz from the armadillo website and > > tried including that header file in the trivial program. This also failed to > > compile. > This is not a bug in Armadillo, but rather a bug (regression) in GCC > 4.7.0 and 4.7.1. > > The relevant Armadillo code follows the C++ standard. > > Code using Armadillo 3.2.3 compiles fine with earlier versions of GCC > (4.4, 4.5 and 4.6) as well as CLang 3.0. > > As such, I suggest filing a bug against the GCC package in Debian. > > There is a related upstream GCC bug, but there seems to be no progress on it: > http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53549 Thanks. Reassigning this bug and marking this as forwarded upstream. Kumar -- Kumar Appaiah From owner at bugs.debian.org Mon Jul 9 13:18:56 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 09 Jul 2012 13:18:56 +0000 Subject: Processed: Re: Bug#680931: libarmadillo-dev: trivial program fails to compile References: <20120709130456.GA16124@bluemoon.alumni.iitm.ac.in> Message-ID: Processing commands for control at bugs.debian.org: > reassign 680931 g++-4.7 4.7.1-2 Bug #680931 [libarmadillo-dev] libarmadillo-dev: trivial program fails to compile Bug reassigned from package 'libarmadillo-dev' to 'g++-4.7'. No longer marked as found in versions armadillo/1:3.2.3+dfsg-1. Ignoring request to alter fixed versions of bug #680931 to the same values previously set Bug #680931 [g++-4.7] libarmadillo-dev: trivial program fails to compile Marked as found in versions gcc-4.7/4.7.1-2. > forwarded 680931 http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53549 Bug #680931 [g++-4.7] libarmadillo-dev: trivial program fails to compile Set Bug forwarded-to-address to 'http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53549'. > tags 680931 + upstream Bug #680931 [g++-4.7] libarmadillo-dev: trivial program fails to compile Ignoring request to alter tags of bug #680931 to the same tags previously set > thanks Stopping processing here. Please contact me if you need assistance. -- 680931: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680931 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From noreply at release.debian.org Mon Jul 9 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:14 +0000 Subject: armadillo 1:3.2.3+dfsg-1 MIGRATED to testing Message-ID: FYI: The status of the armadillo source package in Debian's testing distribution has changed. Previous version: 1:3.2.2+dfsg-1 Current version: 1:3.2.3+dfsg-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-gl 1.1+cvs20070922+dfsg-6 MIGRATED to testing Message-ID: FYI: The status of the yorick-gl source package in Debian's testing distribution has changed. Previous version: 1.1+cvs20070922+dfsg-4 Current version: 1.1+cvs20070922+dfsg-6 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-yutils 1.5.2-1 MIGRATED to testing Message-ID: FYI: The status of the yorick-yutils source package in Debian's testing distribution has changed. Previous version: 1.5.0-1 Current version: 1.5.2-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-yeti 6.3.2-3 MIGRATED to testing Message-ID: FYI: The status of the yorick-yeti source package in Debian's testing distribution has changed. Previous version: 6.3.2-1 Current version: 6.3.2-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-optimpack 1.3.2+dfsg-1 MIGRATED to testing Message-ID: FYI: The status of the yorick-optimpack source package in Debian's testing distribution has changed. Previous version: 1.3.1+dfsg1-1 Current version: 1.3.2+dfsg-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-ml4 0.6.0-3 MIGRATED to testing Message-ID: FYI: The status of the yorick-ml4 source package in Debian's testing distribution has changed. Previous version: 0.6.0-1 Current version: 0.6.0-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-imutil 0.5.7-3 MIGRATED to testing Message-ID: FYI: The status of the yorick-imutil source package in Debian's testing distribution has changed. Previous version: 0.5.7-1 Current version: 0.5.7-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-hdf5 0.8.0-4 MIGRATED to testing Message-ID: FYI: The status of the yorick-hdf5 source package in Debian's testing distribution has changed. Previous version: 0.8.0-2 Current version: 0.8.0-4 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:16 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:16 +0000 Subject: ufc 2.0.5-3 MIGRATED to testing Message-ID: FYI: The status of the ufc source package in Debian's testing distribution has changed. Previous version: 2.0.5-2 Current version: 2.0.5-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-curses 0.1-6 MIGRATED to testing Message-ID: FYI: The status of the yorick-curses source package in Debian's testing distribution has changed. Previous version: 0.1-4 Current version: 0.1-6 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-soy 1.4.0-3 MIGRATED to testing Message-ID: FYI: The status of the yorick-soy source package in Debian's testing distribution has changed. Previous version: 1.4.0-1 Current version: 1.4.0-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-yao 4.9.1-2 MIGRATED to testing Message-ID: FYI: The status of the yorick-yao source package in Debian's testing distribution has changed. Previous version: 4.9.0-1 Current version: 4.9.1-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 9 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 09 Jul 2012 16:39:17 +0000 Subject: yorick-z 1.2.0+cvs20080115-5 MIGRATED to testing Message-ID: FYI: The status of the yorick-z source package in Debian's testing distribution has changed. Previous version: 1.2.0+cvs20080115-4 Current version: 1.2.0+cvs20080115-5 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From invernomuto at paranoici.org Mon Jul 9 17:31:52 2012 From: invernomuto at paranoici.org (Francesco Poli) Date: Mon, 9 Jul 2012 19:31:52 +0200 Subject: Bug#617931: gmsh: multiple licensing issues In-Reply-To: <17e14454a36a98da8e85d4691d3ae3f4@email.freenet.de> References: <17e14454a36a98da8e85d4691d3ae3f4@email.freenet.de> Message-ID: <20120709193152.a02f4ddedad05bfb79676769@paranoici.org> On Thu, 05 Jul 2012 15:21:19 +0200 biucchi at freenet.de wrote: > Dear All, > > I don't understand if this bug is solved: I see that now "gmsh" depends on the OpenCASCADE Community Edition. Dear Gabriele, gmsh now depends on OCE (Open CASCADE Community Edition), but this change does *not* solve the licensing issue, unfortunately, since OCE is a fork of Open CASCADE Technology, and is released under the terms of the same license... Hence, we are back in square one: Open CASCADE S.A.S. should be persuaded to re-license Open CASCADE Technology under GPL-compatible terms. See also the recent thread on debian-science and debian-legal: https://lists.debian.org/debian-legal/2012/06/msg00038.html -- http://www.inventati.org/frx/frx-gpg-key-transition-2010.txt New GnuPG key, see the transition document! ..................................................... Francesco Poli . GnuPG key fpr == CA01 1147 9CD2 EFDF FB82 3925 3E1C 27E1 1F69 BFFE -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: not available URL: From FMann at NPS.K12.NJ.US Tue Jul 10 00:49:58 2012 From: FMann at NPS.K12.NJ.US (Mann, Felicha) Date: Mon, 9 Jul 2012 20:49:58 -0400 Subject: congratulation Message-ID: <94861185AF8B5A46B4CD8907C5DEAE8D0853CC7F1A@NPS-EXMAIL2-SRV.nps.k12.nj.us> your email has just won you 1,000,000,00 (GBP) from british premier oil provide your contact for claim NAME.............. ADDRESS............ PHONE NUMBER.............. AGE................. claimsdept_2012 at hotmail.com From ftpmaster at ftp-master.debian.org Tue Jul 10 09:48:06 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 09:48:06 +0000 Subject: Processing of gyoto_0.0.3-1+exp1_i386.changes Message-ID: GnuPG signature check failed on gyoto_0.0.3-1+exp1_i386.changes gpg: Signature made Tue Jul 10 09:43:08 2012 UTC using RSA key ID E0DC2840 gpg: Can't check signature: public key not found (Exit status 2) /gyoto_0.0.3-1+exp1_i386.changes has bad PGP/GnuPG signature! Removing /gyoto_0.0.3-1+exp1_i386.changes, but keeping its associated files for now. Greetings, Your Debian queue daemon (running on host franck.debian.org) From webmail at pku.edu.cn Tue Jul 10 10:12:16 2012 From: webmail at pku.edu.cn (Webmail Technical Support) Date: Tue, 10 Jul 2012 11:12:16 +0100 Subject: WEBMAIL SECUIRTY AND UPDATE PROCESS Message-ID: <20120710180919.1157@pku.edu.cn> An HTML attachment was scrubbed... URL: From ftpmaster at ftp-master.debian.org Tue Jul 10 11:48:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 11:48:09 +0000 Subject: Processing of gyoto_0.0.3-1+exp1_i386.changes Message-ID: gyoto_0.0.3-1+exp1_i386.changes uploaded successfully to localhost along with the files: gyoto_0.0.3-1+exp1.dsc gyoto_0.0.3-1+exp1.debian.tar.gz gyoto-doc_0.0.3-1+exp1_all.deb gyoto_0.0.3-1+exp1_i386.deb libgyoto0_0.0.3-1+exp1_i386.deb gyoto-dbg_0.0.3-1+exp1_i386.deb libgyoto0-dev_0.0.3-1+exp1_i386.deb yorick-gyoto_0.0.3-1+exp1_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 10 12:02:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 12:02:09 +0000 Subject: gyoto_0.0.3-1+exp1_i386.changes REJECTED Message-ID: Reject Reasons: md5sum for /srv/ftp-master.debian.org/ftp/pool/main/g/gyoto/gyoto_0.0.3.orig.tar.gz doesn't match gyoto_0.0.3-1+exp1.dsc. size for /srv/ftp-master.debian.org/ftp/pool/main/g/gyoto/gyoto_0.0.3.orig.tar.gz doesn't match gyoto_0.0.3-1+exp1.dsc. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From ftpmaster at ftp-master.debian.org Tue Jul 10 13:28:12 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 13:28:12 +0000 Subject: Processing of astk_1.10.4-4_amd64.changes Message-ID: astk_1.10.4-4_amd64.changes uploaded successfully to localhost along with the files: astk_1.10.4-4.dsc astk_1.10.4-4.debian.tar.gz code-aster-gui_1.10.4-4_all.deb code-aster-run_1.10.4-4_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 10 13:32:11 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 13:32:11 +0000 Subject: astk_1.10.4-4_amd64.changes ACCEPTED into unstable Message-ID: Accepted: astk_1.10.4-4.debian.tar.gz to main/a/astk/astk_1.10.4-4.debian.tar.gz astk_1.10.4-4.dsc to main/a/astk/astk_1.10.4-4.dsc code-aster-gui_1.10.4-4_all.deb to main/a/astk/code-aster-gui_1.10.4-4_all.deb code-aster-run_1.10.4-4_all.deb to main/a/astk/code-aster-run_1.10.4-4_all.deb Changes: astk (1.10.4-4) unstable; urgency=low . * debian/control: - Remove dpkg-dev, gcc from code-aster-gui Depends * fix code-aster-gui.config (closes: #679589) * postrm files remove unowned files (closes: #679689) Override entries for your package: astk_1.10.4-4.dsc - source science code-aster-gui_1.10.4-4_all.deb - extra science code-aster-run_1.10.4-4_all.deb - extra science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 679589 679689 Thank you for your contribution to Debian. From owner at bugs.debian.org Tue Jul 10 13:33:09 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 13:33:09 +0000 Subject: Bug#679589: marked as done (code-aster-gui: fails to install) References: <20120629233516.22907.2983.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: Your message dated Tue, 10 Jul 2012 13:32:11 +0000 with message-id and subject line Bug#679589: fixed in astk 1.10.4-4 has caused the Debian Bug report #679589, regarding code-aster-gui: fails to install to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 679589: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679589 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Andreas Beckmann Subject: code-aster-gui: fails to install Date: Sat, 30 Jun 2012 01:35:16 +0200 Size: 14275 URL: -------------- next part -------------- An embedded message was scrubbed... From: Christophe Trophime Subject: Bug#679589: fixed in astk 1.10.4-4 Date: Tue, 10 Jul 2012 13:32:11 +0000 Size: 4607 URL: From owner at bugs.debian.org Tue Jul 10 13:33:16 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 13:33:16 +0000 Subject: Bug#679689: marked as done (code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun) References: <20120630195537.26660.98641.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: Your message dated Tue, 10 Jul 2012 13:32:11 +0000 with message-id and subject line Bug#679689: fixed in astk 1.10.4-4 has caused the Debian Bug report #679689, regarding code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 679689: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679689 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Andreas Beckmann Subject: code-aster-run: unowned files after purge (policy 6.8, 10.8): /etc/codeaster/asrun Date: Sat, 30 Jun 2012 21:55:37 +0200 Size: 12354 URL: -------------- next part -------------- An embedded message was scrubbed... From: Christophe Trophime Subject: Bug#679689: fixed in astk 1.10.4-4 Date: Tue, 10 Jul 2012 13:32:11 +0000 Size: 4582 URL: From ftpmaster at ftp-master.debian.org Tue Jul 10 13:48:13 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 13:48:13 +0000 Subject: Processing of nlopt_2.2.4+dfsg-2_amd64.changes Message-ID: nlopt_2.2.4+dfsg-2_amd64.changes uploaded successfully to localhost along with the files: nlopt_2.2.4+dfsg-2.dsc nlopt_2.2.4+dfsg-2.debian.tar.gz libnlopt0_2.2.4+dfsg-2_amd64.deb libnlopt-dev_2.2.4+dfsg-2_amd64.deb python-nlopt_2.2.4+dfsg-2_amd64.deb octave-nlopt_2.2.4+dfsg-2_amd64.deb libnlopt-guile0_2.2.4+dfsg-2_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 10 13:48:13 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 13:48:13 +0000 Subject: Processing of gyoto_0.0.3-1+exp1_i386.changes Message-ID: gyoto_0.0.3-1+exp1_i386.changes uploaded successfully to localhost along with the files: gyoto_0.0.3-1+exp1.dsc gyoto_0.0.3-1+exp1.debian.tar.gz gyoto-doc_0.0.3-1+exp1_all.deb gyoto_0.0.3-1+exp1_i386.deb libgyoto0_0.0.3-1+exp1_i386.deb gyoto-dbg_0.0.3-1+exp1_i386.deb libgyoto0-dev_0.0.3-1+exp1_i386.deb yorick-gyoto_0.0.3-1+exp1_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 10 14:47:13 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 14:47:13 +0000 Subject: gyoto_0.0.3-1+exp1_i386.changes ACCEPTED into experimental Message-ID: Accepted: gyoto-dbg_0.0.3-1+exp1_i386.deb to main/g/gyoto/gyoto-dbg_0.0.3-1+exp1_i386.deb gyoto-doc_0.0.3-1+exp1_all.deb to main/g/gyoto/gyoto-doc_0.0.3-1+exp1_all.deb gyoto_0.0.3-1+exp1.debian.tar.gz to main/g/gyoto/gyoto_0.0.3-1+exp1.debian.tar.gz gyoto_0.0.3-1+exp1.dsc to main/g/gyoto/gyoto_0.0.3-1+exp1.dsc gyoto_0.0.3-1+exp1_i386.deb to main/g/gyoto/gyoto_0.0.3-1+exp1_i386.deb libgyoto0-dev_0.0.3-1+exp1_i386.deb to main/g/gyoto/libgyoto0-dev_0.0.3-1+exp1_i386.deb libgyoto0_0.0.3-1+exp1_i386.deb to main/g/gyoto/libgyoto0_0.0.3-1+exp1_i386.deb yorick-gyoto_0.0.3-1+exp1_i386.deb to main/g/gyoto/yorick-gyoto_0.0.3-1+exp1_i386.deb Changes: gyoto (0.0.3-1+exp1) experimental; urgency=low . * Bug fix: "FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite)" (Closes: #679923). * Tentative bug fix: "don't rely on yorick to pass the fortified build flags" using patch fix_679923_kfreebsd_FTBFS (Closes: #680242). Override entries for your package: gyoto-dbg_0.0.3-1+exp1_i386.deb - extra debug gyoto-doc_0.0.3-1+exp1_all.deb - extra doc gyoto_0.0.3-1+exp1.dsc - source science gyoto_0.0.3-1+exp1_i386.deb - extra science libgyoto0-dev_0.0.3-1+exp1_i386.deb - extra libdevel libgyoto0_0.0.3-1+exp1_i386.deb - extra science yorick-gyoto_0.0.3-1+exp1_i386.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Closing bugs: 679923 680242 Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 10 14:47:33 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 10 Jul 2012 14:47:33 +0000 Subject: nlopt_2.2.4+dfsg-2_amd64.changes REJECTED Message-ID: Reject Reasons: md5sum for /srv/ftp-master.debian.org/ftp/pool/main/n/nlopt/nlopt_2.2.4+dfsg.orig.tar.gz doesn't match nlopt_2.2.4+dfsg-2.dsc. size for /srv/ftp-master.debian.org/ftp/pool/main/n/nlopt/nlopt_2.2.4+dfsg.orig.tar.gz doesn't match nlopt_2.2.4+dfsg-2.dsc. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From owner at bugs.debian.org Tue Jul 10 14:51:47 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 14:51:47 +0000 Subject: Bug#679923: marked as done (FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite)) References: <20120702142025.20038.86953.reportbug@localhost.localdomain> Message-ID: Your message dated Tue, 10 Jul 2012 14:47:13 +0000 with message-id and subject line Bug#679923: fixed in gyoto 0.0.3-1+exp1 has caused the Debian Bug report #679923, regarding FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 679923: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679923 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) Date: Mon, 02 Jul 2012 16:20:25 +0200 Size: 2116 URL: -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: Bug#679923: fixed in gyoto 0.0.3-1+exp1 Date: Tue, 10 Jul 2012 14:47:13 +0000 Size: 6060 URL: From owner at bugs.debian.org Tue Jul 10 14:51:50 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 14:51:50 +0000 Subject: Bug#680242: marked as done (don't rely on yorick to pass the fortified build flags) References: <20120704150614.17502.27911.reportbug@localhost.localdomain> Message-ID: Your message dated Tue, 10 Jul 2012 14:47:13 +0000 with message-id and subject line Bug#680242: fixed in gyoto 0.0.3-1+exp1 has caused the Debian Bug report #680242, regarding don't rely on yorick to pass the fortified build flags to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680242: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680242 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: don't rely on yorick to pass the fortified build flags Date: Wed, 04 Jul 2012 17:06:14 +0200 Size: 2571 URL: -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: Bug#680242: fixed in gyoto 0.0.3-1+exp1 Date: Tue, 10 Jul 2012 14:47:13 +0000 Size: 6085 URL: From noreply at release.debian.org Tue Jul 10 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:14 +0000 Subject: blas 1.2.20110419-5 MIGRATED to testing Message-ID: FYI: The status of the blas source package in Debian's testing distribution has changed. Previous version: 1.2.20110419-3 Current version: 1.2.20110419-5 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:15 +0000 Subject: freefoam 0.1.0-1 MIGRATED to testing Message-ID: FYI: The status of the freefoam source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 0.1.0-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:19 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:19 +0000 Subject: yp-svipc 0.14-1 MIGRATED to testing Message-ID: FYI: The status of the yp-svipc source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 0.14-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:19 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:19 +0000 Subject: yorick-mpeg 0.1-2 MIGRATED to testing Message-ID: FYI: The status of the yorick-mpeg source package in Debian's testing distribution has changed. Previous version: 0.1-1 Current version: 0.1-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:19 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:19 +0000 Subject: yorick-av 0.0.1-2 MIGRATED to testing Message-ID: FYI: The status of the yorick-av source package in Debian's testing distribution has changed. Previous version: 0.0.1-1 Current version: 0.0.1-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:19 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:19 +0000 Subject: yorick-mira 0.9.10+dfsg-1 MIGRATED to testing Message-ID: FYI: The status of the yorick-mira source package in Debian's testing distribution has changed. Previous version: 0.9.10-3 Current version: 0.9.10+dfsg-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:19 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:19 +0000 Subject: yorick-spydr 0.8.2-3 MIGRATED to testing Message-ID: FYI: The status of the yorick-spydr source package in Debian's testing distribution has changed. Previous version: 0.8.2-1 Current version: 0.8.2-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:15 +0000 Subject: fflas-ffpack 1.6.0-1 MIGRATED to testing Message-ID: FYI: The status of the fflas-ffpack source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 1.6.0-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:18 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:18 +0000 Subject: thepeg 1.8.0-1 MIGRATED to testing Message-ID: FYI: The status of the thepeg source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 1.8.0-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:15 +0000 Subject: frogdata 0.3-2 MIGRATED to testing Message-ID: FYI: The status of the frogdata source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 0.3-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:15 +0000 Subject: gyoto 0.0.3-1 MIGRATED to testing Message-ID: FYI: The status of the gyoto source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 0.0.3-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Tue Jul 10 16:39:17 2012 From: noreply at release.debian.org (Debian testing watch) Date: Tue, 10 Jul 2012 16:39:17 +0000 Subject: python-pyds9 1.4-1 MIGRATED to testing Message-ID: FYI: The status of the python-pyds9 source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 1.4-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From GdV87 at libero.it Tue Jul 10 21:05:14 2012 From: GdV87 at libero.it (GdV87 at libero.it) Date: Tue, 10 Jul 2012 23:05:14 +0200 (CEST) Subject: Bug#680777: libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Message-ID: <26928854.1301951341954314251.JavaMail.defaultUser@defaultHost> Here it is: ~$ update-alternatives --display libblas.so.3 libblas.so.3 - modalit? automatica il collegamento attualmente punta a /usr/lib/openblas-base/libopenblas.so.0 /usr/lib/atlas-base/atlas/libblas.so.3 - priorit? 35 slave libatlas.so.3: /usr/lib/atlas-base/libatlas.so.3 slave libatlas.so.3gf: /usr/lib/atlas-base/libatlas.so.3 slave libblas.so.3gf: /usr/lib/atlas-base/atlas/libblas.so.3 slave libcblas.so.3: /usr/lib/atlas-base/libcblas.so.3 slave libcblas.so.3gf: /usr/lib/atlas-base/libcblas.so.3 slave libf77blas.so.3: /usr/lib/atlas-base/libf77blas.so.3 slave libf77blas.so.3gf: /usr/lib/atlas-base/libf77blas.so.3 slave liblapack_atlas.so.3: /usr/lib/atlas-base/liblapack_atlas.so.3 slave liblapack_atlas.so.3gf: /usr/lib/atlas-base/liblapack_atlas.so.3 /usr/lib/openblas-base/libopenblas.so.0 - priorit? 40 slave libblas.so.3gf: /usr/lib/openblas-base/libopenblas.so.0 La versione "best" attuale ? "/usr/lib/openblas-base/libopenblas.so.0". Greets Giuseppe de Vito >>----Messaggio originale---- >>Da: sebastien.villemot at ens.fr >>Data: 08/07/2012 19.57 >>A: "Giuseppe de Vito" >>Cc: <680777 at bugs.debian.org>, >>Ogg: Re: Bug#680777: libblas3gf: gimp is segfaulting if ' libblas3gf' >is installed >> >>severity 680777 important >>tags 680777 + moreinfo >>thanks >> >>Giuseppe de Vito writes: >> >>> Package: libblas3gf >>> Version: 1.2.20110419-5 >>> Severity: critical >>> Justification: breaks unrelated software >>> >>> Dear Maintainer, >>> gimp is segfaulting if 'libblas3gf' is installed. If 'libblas3gf' is not >>> installed, 'libgegl-0.2-0' complains about it being missing if I execute >gimp >>> (but gimp runs fine none-the-less) with this error message: >>> "GEGL-geglmodule.c-Message: Module '/usr/lib/x86_64-linux-gnu/gegl-0.2 >/matting- >>> levin.so' load error: libblas.so.3gf" >>> This is the output of "dpkg -l libblas*": >> >>Can you please dump the output of "update-alternatives --display libblas.so. >3"? >> >>You are probably hit by #673061, which is actually an openblas bug. >> >>Thanks, >> >>-- >>S?bastien Villemot >>Researcher in Economics & Debian Maintainer >>http://www.dynare.org/sebastien >>Phone: +33-1-40-77-84-04 - GPG Key: 4096R/381A7594 >> > > From sebastien.villemot at ens.fr Tue Jul 10 21:06:19 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Tue, 10 Jul 2012 23:06:19 +0200 Subject: Bug#680777: R: Re: Bug#680777: libblas3gf: gimp is segfaulting if 'libblas3gf' is installed In-Reply-To: <19586840.1297431341953556341.JavaMail.defaultUser@defaultHost> (GdV's message of "Tue, 10 Jul 2012 22:52:36 +0200 (CEST)") References: <19586840.1297431341953556341.JavaMail.defaultUser@defaultHost> Message-ID: <87sjcziawk.fsf@brouzouf.villemot.name> reassign 680777 libopenblas-base forcemerge 673061 680777 thanks "GdV87 at libero.it" writes: > Here it is: > > ~$ update-alternatives --display libblas.so.3 > libblas.so.3 - modalit? automatica > il collegamento attualmente punta a /usr/lib/openblas-base/libopenblas.so.0 > /usr/lib/atlas-base/atlas/libblas.so.3 - priorit? 35 > slave libatlas.so.3: /usr/lib/atlas-base/libatlas.so.3 > slave libatlas.so.3gf: /usr/lib/atlas-base/libatlas.so.3 > slave libblas.so.3gf: /usr/lib/atlas-base/atlas/libblas.so.3 > slave libcblas.so.3: /usr/lib/atlas-base/libcblas.so.3 > slave libcblas.so.3gf: /usr/lib/atlas-base/libcblas.so.3 > slave libf77blas.so.3: /usr/lib/atlas-base/libf77blas.so.3 > slave libf77blas.so.3gf: /usr/lib/atlas-base/libf77blas.so.3 > slave liblapack_atlas.so.3: /usr/lib/atlas-base/liblapack_atlas.so.3 > slave liblapack_atlas.so.3gf: /usr/lib/atlas-base/liblapack_atlas.so.3 > /usr/lib/openblas-base/libopenblas.so.0 - priorit? 40 > slave libblas.so.3gf: /usr/lib/openblas-base/libopenblas.so.0 > La versione "best" attuale ? "/usr/lib/openblas-base/libopenblas.so.0". You are indeed using openblas. I?m therefore reassigning and merging this bug. -- .''`. S?bastien Villemot : :' : Debian Maintainer `. `' http://www.dynare.org/sebastien `- GPG Key: 4096R/381A7594 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 835 bytes Desc: not available URL: From owner at bugs.debian.org Tue Jul 10 21:11:32 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 21:11:32 +0000 Subject: Processed: Re: R: Re: Bug#680777: libblas3gf: gimp is segfaulting if 'libblas3gf' is installed References: <87sjcziawk.fsf@brouzouf.villemot.name> Message-ID: Processing commands for control at bugs.debian.org: > reassign 680777 libopenblas-base Bug #680777 [libblas3gf] libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Bug reassigned from package 'libblas3gf' to 'libopenblas-base'. No longer marked as found in versions blas/1.2.20110419-5. Ignoring request to alter fixed versions of bug #680777 to the same values previously set > forcemerge 673061 680777 Bug #673061 [libopenblas-base] gimp: segfaults on startup if libopenblas-base is installed Bug #675903 [libopenblas-base] Segfault at startup Bug #679632 [libopenblas-base] gimp: Gimp crashes with OpenBlas Bug #673061 [libopenblas-base] gimp: segfaults on startup if libopenblas-base is installed Added tag(s) moreinfo. Added tag(s) moreinfo. Added tag(s) moreinfo. Bug #680777 [libopenblas-base] libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Added indication that 680777 affects gimp Marked as found in versions openblas/0.1.1-4. Added tag(s) confirmed. Bug #675903 [libopenblas-base] Segfault at startup Bug #679632 [libopenblas-base] gimp: Gimp crashes with OpenBlas Merged 673061 675903 679632 680777 > thanks Stopping processing here. Please contact me if you need assistance. -- 673061: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673061 675903: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675903 679632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679632 680777: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680777 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Tue Jul 10 21:18:43 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 21:18:43 +0000 Subject: Processed: tagging 673061 References: <1341954837-3208-bts-sebastien.villemot@ens.fr> Message-ID: Processing commands for control at bugs.debian.org: > tags 673061 - moreinfo Bug #673061 [libopenblas-base] gimp: segfaults on startup if libopenblas-base is installed Bug #675903 [libopenblas-base] Segfault at startup Bug #679632 [libopenblas-base] gimp: Gimp crashes with OpenBlas Bug #680777 [libopenblas-base] libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Removed tag(s) moreinfo. Removed tag(s) moreinfo. Removed tag(s) moreinfo. Removed tag(s) moreinfo. > thanks Stopping processing here. Please contact me if you need assistance. -- 673061: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673061 675903: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675903 679632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679632 680777: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680777 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Tue Jul 10 21:54:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 10 Jul 2012 21:54:07 +0000 Subject: Processed: Re: FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) References: <4FFCA3D2.8020905@users.sourceforge.net> Message-ID: Processing commands for control at bugs.debian.org: > found 679923 gyoto/0.0.3-1+exp1 Bug #679923 {Done: Thibaut Paumard } [src:gyoto] FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) Marked as found in versions gyoto/0.0.3-1+exp1; no longer marked as fixed in versions gyoto/0.0.3-1+exp1 and reopened. > thanks Stopping processing here. Please contact me if you need assistance. -- 679923: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679923 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From julien.cristau at logilab.fr Wed Jul 11 08:05:39 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Wed, 11 Jul 2012 10:05:39 +0200 Subject: Bug#680738: salome-gui: links with both GPL-licensed and GPL-incompatible libraries In-Reply-To: <20120708103739.8265.91191.reportbug@homebrew> References: <20120708103739.8265.91191.reportbug@homebrew> Message-ID: <20120711080539.GA8469@crater1.logilab.fr> On Sun, Jul 8, 2012 at 12:37:39 +0200, Francesco Poli (wintermute) wrote: > Package: salome-gui > Version: 6.5.0-1 > Severity: serious > Justification: Policy 2.2.1 > > Hello Debian Science Maintainers, > thanks for your effort to reintroduce SALOME into Debian. > > However, it seems to me that one of the licensing issues that > affected the previous package [1] is still present in the > current salome-gui package. > > [1] http://bugs.debian.org/619662 > > Indeed, salome-gui is licensed under the terms of the GNU LGPL v2.1, > but links with libcos4-1/libomniorb4-1, which include [2] files > released under the terms of the GNU GPL v2 or later. > I don't think that's true. The files listed as GPL in http://packages.debian.org/changelogs/pool/main/o/omniorb-dfsg/current/copyright are src/appl/*, src/tool/omniidl/cxx/cccp/*, which sound like they're part of some utilities, not the libraries. This is also what README.FIRST.txt in the omniorb-dfsg source says. Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From eloi at anbuco.fr Wed Jul 11 08:59:37 2012 From: eloi at anbuco.fr (Eloi COUTANT) Date: Wed, 11 Jul 2012 10:59:37 +0200 Subject: Bug#681188: scilab: Issue with locales values and import/export text files Message-ID: <20120711105937.1539a5ec@Suzanne.Arsene> Package: scilab Version: 5.3.3-10 Severity: normal Tags: l10n Hi, I'm french and my locales are curently : LANG=fr_FR.UTF-8 LANGUAGE=fr_FR:fr LC_*=fr_FR.UTF-8 LC_ALL= When I start scilab with these locales parameters, I read the warning below : (process:24188): Gtk-WARNING **: Locale not supported by C libr Using the fallback 'C' locale. This warning disappears if I export the LC_ALL variable with 'fr_FR.UTF-8' and the errors messages in Scilab become in french (cool !). The problem is with the functions "fscanfMat" and "fprintfMat", which are supposed to import or export a matrix of floatting numbers. In Scilab, the decimal separator is the point ( . ) ; but with LC_ALL='fr_FR.UTF-8', the decimal separators in exported and imported text files becomes a comma (,), when Scilab's "internal" decimal separators is still the point... To summarize : it's impossible to import/export matrix of floatting numbers with fscanfMat/fprintfMat functions when LC_ALL='fr_FR.UTF-8' because of the difference between the internal decimal separators of Scilab and the decimal separator used in text files. Just to be clear: the system is "coherent", because files exported with one value of the locale are readable as long as we don't change the locale value... but it makes exchange of files between peoples who don't use the same language impossible! If it isn't perfectly clear or if you need more informations, don't hesitate to contact with me back. Best regards, Eloi -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages scilab depends on: ii scilab-cli 5.3.3-10 ii scilab-full-bin 5.3.3-10 Versions of packages scilab recommends: ii scilab-doc 5.3.3-10 Versions of packages scilab suggests: ii scilab-doc-fr 5.3.3-10 pn scilab-doc-ja pn scilab-doc-pt-br -- no debconf information From ftpmaster at ftp-master.debian.org Wed Jul 11 10:04:56 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 10:04:56 +0000 Subject: Processing of gyoto_0.0.3-2_i386.changes Message-ID: gyoto_0.0.3-2_i386.changes uploaded successfully to localhost along with the files: gyoto_0.0.3-2.dsc gyoto_0.0.3-2.debian.tar.gz gyoto-doc_0.0.3-2_all.deb gyoto_0.0.3-2_i386.deb libgyoto0_0.0.3-2_i386.deb gyoto-dbg_0.0.3-2_i386.deb libgyoto0-dev_0.0.3-2_i386.deb yorick-gyoto_0.0.3-2_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 11 10:17:34 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 10:17:34 +0000 Subject: gyoto_0.0.3-2_i386.changes ACCEPTED into unstable Message-ID: Accepted: gyoto-dbg_0.0.3-2_i386.deb to main/g/gyoto/gyoto-dbg_0.0.3-2_i386.deb gyoto-doc_0.0.3-2_all.deb to main/g/gyoto/gyoto-doc_0.0.3-2_all.deb gyoto_0.0.3-2.debian.tar.gz to main/g/gyoto/gyoto_0.0.3-2.debian.tar.gz gyoto_0.0.3-2.dsc to main/g/gyoto/gyoto_0.0.3-2.dsc gyoto_0.0.3-2_i386.deb to main/g/gyoto/gyoto_0.0.3-2_i386.deb libgyoto0-dev_0.0.3-2_i386.deb to main/g/gyoto/libgyoto0-dev_0.0.3-2_i386.deb libgyoto0_0.0.3-2_i386.deb to main/g/gyoto/libgyoto0_0.0.3-2_i386.deb yorick-gyoto_0.0.3-2_i386.deb to main/g/gyoto/yorick-gyoto_0.0.3-2_i386.deb Changes: gyoto (0.0.3-2) unstable; urgency=low . * Bug fix: "FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite)", (Closes: #679923). The previous "fix" did not work at all. The library and the Yorick interface work fine, but not the stand-alone application. Disable the "gyoto" binary package and the test suite on kfreebsd-*. Override entries for your package: gyoto-dbg_0.0.3-2_i386.deb - extra debug gyoto-doc_0.0.3-2_all.deb - extra doc gyoto_0.0.3-2.dsc - source science gyoto_0.0.3-2_i386.deb - extra science libgyoto0-dev_0.0.3-2_i386.deb - extra libdevel libgyoto0_0.0.3-2_i386.deb - extra science yorick-gyoto_0.0.3-2_i386.deb - extra science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 679923 Thank you for your contribution to Debian. From owner at bugs.debian.org Wed Jul 11 10:21:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 11 Jul 2012 10:21:04 +0000 Subject: Bug#679923: marked as done (FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite)) References: <20120702142025.20038.86953.reportbug@localhost.localdomain> Message-ID: Your message dated Wed, 11 Jul 2012 10:17:34 +0000 with message-id and subject line Bug#679923: fixed in gyoto 0.0.3-2 has caused the Debian Bug report #679923, regarding FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 679923: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679923 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: FTBFS on kfreebsd-i386 and kfreebsd-amd64 (test suite) Date: Mon, 02 Jul 2012 16:20:25 +0200 Size: 2116 URL: -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: Bug#679923: fixed in gyoto 0.0.3-2 Date: Wed, 11 Jul 2012 10:17:34 +0000 Size: 5970 URL: From ftpmaster at ftp-master.debian.org Wed Jul 11 11:15:04 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 11:15:04 +0000 Subject: Processing of gyoto_0.0.3-3_i386.changes Message-ID: gyoto_0.0.3-3_i386.changes uploaded successfully to localhost along with the files: gyoto_0.0.3-3.dsc gyoto_0.0.3-3.debian.tar.gz gyoto-doc_0.0.3-3_all.deb gyoto_0.0.3-3_i386.deb libgyoto0_0.0.3-3_i386.deb gyoto-dbg_0.0.3-3_i386.deb libgyoto0-dev_0.0.3-3_i386.deb yorick-gyoto_0.0.3-3_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 11 11:17:21 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 11:17:21 +0000 Subject: gyoto_0.0.3-3_i386.changes ACCEPTED into unstable Message-ID: Accepted: gyoto-dbg_0.0.3-3_i386.deb to main/g/gyoto/gyoto-dbg_0.0.3-3_i386.deb gyoto-doc_0.0.3-3_all.deb to main/g/gyoto/gyoto-doc_0.0.3-3_all.deb gyoto_0.0.3-3.debian.tar.gz to main/g/gyoto/gyoto_0.0.3-3.debian.tar.gz gyoto_0.0.3-3.dsc to main/g/gyoto/gyoto_0.0.3-3.dsc gyoto_0.0.3-3_i386.deb to main/g/gyoto/gyoto_0.0.3-3_i386.deb libgyoto0-dev_0.0.3-3_i386.deb to main/g/gyoto/libgyoto0-dev_0.0.3-3_i386.deb libgyoto0_0.0.3-3_i386.deb to main/g/gyoto/libgyoto0_0.0.3-3_i386.deb yorick-gyoto_0.0.3-3_i386.deb to main/g/gyoto/yorick-gyoto_0.0.3-3_i386.deb Changes: gyoto (0.0.3-3) unstable; urgency=low . * debian/control Architectures fields should not be folded: previous upload led to missing binary packages for some archs. Override entries for your package: gyoto-dbg_0.0.3-3_i386.deb - extra debug gyoto-doc_0.0.3-3_all.deb - extra doc gyoto_0.0.3-3.dsc - source science gyoto_0.0.3-3_i386.deb - extra science libgyoto0-dev_0.0.3-3_i386.deb - extra libdevel libgyoto0_0.0.3-3_i386.deb - extra science yorick-gyoto_0.0.3-3_i386.deb - extra science Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Wed Jul 11 12:35:13 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 12:35:13 +0000 Subject: Processing of yp-svipc_0.14-2_i386.changes Message-ID: yp-svipc_0.14-2_i386.changes uploaded successfully to localhost along with the files: yp-svipc_0.14-2.dsc yp-svipc_0.14-2.debian.tar.gz yorick-svipc_0.14-2_i386.deb python-svipc_0.14-2_i386.deb python3-svipc_0.14-2_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 11 12:47:26 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 12:47:26 +0000 Subject: yp-svipc_0.14-2_i386.changes REJECTED Message-ID: Reject Reasons: md5sum for /srv/ftp-master.debian.org/ftp/pool/main/y/yp-svipc/yp-svipc_0.14.orig.tar.gz doesn't match yp-svipc_0.14-2.dsc. size for /srv/ftp-master.debian.org/ftp/pool/main/y/yp-svipc/yp-svipc_0.14.orig.tar.gz doesn't match yp-svipc_0.14-2.dsc. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From ftpmaster at ftp-master.debian.org Wed Jul 11 12:50:14 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 12:50:14 +0000 Subject: Processing of gyoto_0.0.3-4_i386.changes Message-ID: gyoto_0.0.3-4_i386.changes uploaded successfully to localhost along with the files: gyoto_0.0.3-4.dsc gyoto_0.0.3-4.debian.tar.gz gyoto-doc_0.0.3-4_all.deb gyoto_0.0.3-4_i386.deb libgyoto0_0.0.3-4_i386.deb gyoto-dbg_0.0.3-4_i386.deb libgyoto0-dev_0.0.3-4_i386.deb yorick-gyoto_0.0.3-4_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 11 13:02:24 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 13:02:24 +0000 Subject: gyoto_0.0.3-4_i386.changes ACCEPTED into unstable Message-ID: Accepted: gyoto-dbg_0.0.3-4_i386.deb to main/g/gyoto/gyoto-dbg_0.0.3-4_i386.deb gyoto-doc_0.0.3-4_all.deb to main/g/gyoto/gyoto-doc_0.0.3-4_all.deb gyoto_0.0.3-4.debian.tar.gz to main/g/gyoto/gyoto_0.0.3-4.debian.tar.gz gyoto_0.0.3-4.dsc to main/g/gyoto/gyoto_0.0.3-4.dsc gyoto_0.0.3-4_i386.deb to main/g/gyoto/gyoto_0.0.3-4_i386.deb libgyoto0-dev_0.0.3-4_i386.deb to main/g/gyoto/libgyoto0-dev_0.0.3-4_i386.deb libgyoto0_0.0.3-4_i386.deb to main/g/gyoto/libgyoto0_0.0.3-4_i386.deb yorick-gyoto_0.0.3-4_i386.deb to main/g/gyoto/yorick-gyoto_0.0.3-4_i386.deb Changes: gyoto (0.0.3-4) unstable; urgency=low . * gyoto-dbg must not depend on gyoto on kfreebsd-*, else it is uninstallable on these archs. Override entries for your package: gyoto-dbg_0.0.3-4_i386.deb - extra debug gyoto-doc_0.0.3-4_all.deb - extra doc gyoto_0.0.3-4.dsc - source science gyoto_0.0.3-4_i386.deb - extra science libgyoto0-dev_0.0.3-4_i386.deb - extra libdevel libgyoto0_0.0.3-4_i386.deb - extra science yorick-gyoto_0.0.3-4_i386.deb - extra science Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Wed Jul 11 13:15:15 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 13:15:15 +0000 Subject: Processing of yp-svipc_0.14-2_i386.changes Message-ID: yp-svipc_0.14-2_i386.changes uploaded successfully to localhost along with the files: yp-svipc_0.14-2.dsc yp-svipc_0.14-2.debian.tar.gz yorick-svipc_0.14-2_i386.deb python-svipc_0.14-2_i386.deb python3-svipc_0.14-2_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 11 13:17:10 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 11 Jul 2012 13:17:10 +0000 Subject: yp-svipc_0.14-2_i386.changes ACCEPTED into unstable Message-ID: Accepted: python-svipc_0.14-2_i386.deb to main/y/yp-svipc/python-svipc_0.14-2_i386.deb python3-svipc_0.14-2_i386.deb to main/y/yp-svipc/python3-svipc_0.14-2_i386.deb yorick-svipc_0.14-2_i386.deb to main/y/yp-svipc/yorick-svipc_0.14-2_i386.deb yp-svipc_0.14-2.debian.tar.gz to main/y/yp-svipc/yp-svipc_0.14-2.debian.tar.gz yp-svipc_0.14-2.dsc to main/y/yp-svipc/yp-svipc_0.14-2.dsc Changes: yp-svipc (0.14-2) unstable; urgency=low . * Bug fix: "don't rely on yorick to pass the fortified build flags" (Closes: #680216). * Bug fix: "FTBFS on kfreebsd-i386 and kfreebsd-amd64: "conflicting types for semtimedop"" (Closes: #679919). Involves a patch for the Python modules (fix_679919_kFreeBSD_FTBFS) and passing PKG_CFLAGS when building the Yorick plug-in. Override entries for your package: python-svipc_0.14-2_i386.deb - extra python python3-svipc_0.14-2_i386.deb - extra python yorick-svipc_0.14-2_i386.deb - extra science yp-svipc_0.14-2.dsc - source science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 679919 680216 Thank you for your contribution to Debian. From owner at bugs.debian.org Wed Jul 11 13:21:27 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 11 Jul 2012 13:21:27 +0000 Subject: Bug#679919: marked as done (FTBFS on kfreebsd-i386 and kfreebsd-amd64: "conflicting types for semtimedop") References: <4FF1A479.8060008@users.sourceforge.net> Message-ID: Your message dated Wed, 11 Jul 2012 13:17:10 +0000 with message-id and subject line Bug#679919: fixed in yp-svipc 0.14-2 has caused the Debian Bug report #679919, regarding FTBFS on kfreebsd-i386 and kfreebsd-amd64: "conflicting types for semtimedop" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 679919: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679919 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: FTBFS on kfreebsd-i386 and kfreebsd-amd64: "conflicting types for semtimedop" Date: Mon, 02 Jul 2012 15:39:05 +0200 Size: 2867 URL: -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: Bug#679919: fixed in yp-svipc 0.14-2 Date: Wed, 11 Jul 2012 13:17:10 +0000 Size: 5131 URL: From owner at bugs.debian.org Wed Jul 11 13:21:32 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 11 Jul 2012 13:21:32 +0000 Subject: Bug#680216: marked as done (don't rely on yorick to pass the fortified build flags) References: <20120704132440.24978.3071.reportbug@localhost.localdomain> Message-ID: Your message dated Wed, 11 Jul 2012 13:17:10 +0000 with message-id and subject line Bug#680216: fixed in yp-svipc 0.14-2 has caused the Debian Bug report #680216, regarding don't rely on yorick to pass the fortified build flags to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680216: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680216 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: don't rely on yorick to pass the fortified build flags Date: Wed, 04 Jul 2012 15:24:40 +0200 Size: 2387 URL: -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: Bug#680216: fixed in yp-svipc 0.14-2 Date: Wed, 11 Jul 2012 13:17:10 +0000 Size: 5131 URL: From amsterdames200 at yahoo.fr Wed Jul 11 14:24:05 2012 From: amsterdames200 at yahoo.fr (Gaston M.) Date: Wed, 11 Jul 2012 15:24:05 +0100 (BST) Subject: lisez Message-ID: <1342016645.59692.YahooMailClassic@web29606.mail.ird.yahoo.com> Bonjour, Je me nomme GASTON MICHEL d'origine belge, directeur du d?partement de cr?dit et de r?mittence internationale de BIBE banque. J'ai la souscription d'un de nos clients Monsieur Kalidou Aliou Ben Amad ?trangers qui a trouv? la mort avec toute sa famille enti?re dans un crash d'avion survenu le 25 D?cembre 2003 ? l'a?roport International CBG (Cardinal Bernardin Ganti).Sur son compte a ?t? d?couvert 11 million $ US (ONZE MILLION de dollars am?ricain). Consultez le site web pour revivre le crash de l'avion: http://www.sangonet.com/Fich6ActuaInterAfric/accident-avion-Benin25dec03.html Je vous contacte pour une coop?ration honn?te pouvant nous permettre de transf?rer cet argent dans votre compte. je vous rappelle que cette transaction est l?gale car cet argent n'appartient ? personne et que tous les agencements exig?s ont ?t? pris pour mener ? bien le transfert sans risque aucun pour les deux partis (vous et moi).Je vous donnerai plus de d?tails si vous me donnez votre accord pour un partenariat gagnant . L'argent sera transf?r? dans le compte de tr?sor de banque comme bien des fonds ? la fin de l'ann?e 2013 si personne ne le r?clame selon les directives d'op?ration bancaire r?gis par la loi et voici nous sommes au d?but l?ann?e 2012. Je vous prie donc de faire diligence pour que nous jouissions de cette coop?ration. je tiens a vous rappeler que le fonds sera partag? ? la proportion de 58 % pour moi; 40 % pour vous et 2 % seront mis de c?t? pour couvrir n'importe quelles d?penses et imp?t(taxe) dans votre banque. Traitez s'il vous pla?t cette proposition d'affaires avec la confidentialit? extr?me et envoyez-moi un mail dans ma boite personnelle pour confirmation. Ne laissez pas passer cette affaire qui pourra changer nos vies. ?E-mail: gasmich at yahoo.be Remerciements et meilleures salutations. Cordialement ? ?GASTON M. -------------- next part -------------- An HTML attachment was scrubbed... URL: From sebastien.villemot at ens.fr Wed Jul 11 16:50:11 2012 From: sebastien.villemot at ens.fr (=?UTF-8?Q?S=C3=A9bastien?= Villemot) Date: Wed, 11 Jul 2012 18:50:11 +0200 Subject: Bug#673061: gimp: segfaults on startup if libopenblas-base is installed Message-ID: <20120711165011.28491.15433.reportbug@karaba.cepremap.org> Package: libopenblas-base Followup-For: Bug #673061 Some more information on this bug: - the bug disappears if OpenBLAS is compiled without multi-thread support (i.e. with NUM_THREADS=1 on the make command line) - the crash occurs at line 296 of drivers/others/blas_server.c, which reads: if ((unsigned int)rpcc() - last_tick > thread_timeout) { - the bug is still present with upstream versions 0.2.1 and 0.2.2 -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash From owner at bugs.debian.org Wed Jul 11 17:36:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 11 Jul 2012 17:36:04 +0000 Subject: Bug#680738: marked as done (salome-gui: links with both GPL-licensed and GPL-incompatible libraries) References: <20120711190619.5e3bfac3453efc25799942d3@paranoici.org> <20120708103739.8265.91191.reportbug@homebrew> Message-ID: Your message dated Wed, 11 Jul 2012 19:06:19 +0200 with message-id <20120711190619.5e3bfac3453efc25799942d3 at paranoici.org> and subject line Re: Bug#680738: salome-gui: links with both GPL-licensed and GPL-incompatible libraries has caused the Debian Bug report #680738, regarding salome-gui: links with both GPL-licensed and GPL-incompatible libraries to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680738: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680738 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: "Francesco Poli \(wintermute\)" Subject: salome-gui: links with both GPL-licensed and GPL-incompatible libraries Date: Sun, 08 Jul 2012 12:37:39 +0200 Size: 4218 URL: -------------- next part -------------- An embedded message was scrubbed... From: Francesco Poli Subject: Re: Bug#680738: salome-gui: links with both GPL-licensed and GPL-incompatible libraries Date: Wed, 11 Jul 2012 19:06:19 +0200 Size: 5608 URL: From ftpmaster at ftp-master.debian.org Thu Jul 12 07:56:49 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 07:56:49 +0000 Subject: Processing of salome-med_6.5.0-2_multi.changes Message-ID: salome-med_6.5.0-2_multi.changes uploaded successfully to localhost along with the files: salome-med_6.5.0-2.dsc salome-med_6.5.0-2.diff.gz salome-med_6.5.0-2_amd64.deb salome-med-dev_6.5.0-2_amd64.deb salome-med-doc_6.5.0-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 07:56:49 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 07:56:49 +0000 Subject: Processing of salome-gui_6.5.0-2_multi.changes Message-ID: salome-gui_6.5.0-2_multi.changes uploaded successfully to localhost along with the files: salome-gui_6.5.0-2.dsc salome-gui_6.5.0-2.diff.gz salome-gui_6.5.0-2_amd64.deb salome-gui-dev_6.5.0-2_amd64.deb salome-gui-doc_6.5.0-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 08:47:33 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 08:47:33 +0000 Subject: salome-gui_6.5.0-2_multi.changes ACCEPTED into experimental Message-ID: Accepted: salome-gui-dev_6.5.0-2_amd64.deb to main/s/salome-gui/salome-gui-dev_6.5.0-2_amd64.deb salome-gui-doc_6.5.0-2_all.deb to main/s/salome-gui/salome-gui-doc_6.5.0-2_all.deb salome-gui_6.5.0-2.diff.gz to main/s/salome-gui/salome-gui_6.5.0-2.diff.gz salome-gui_6.5.0-2.dsc to main/s/salome-gui/salome-gui_6.5.0-2.dsc salome-gui_6.5.0-2_amd64.deb to main/s/salome-gui/salome-gui_6.5.0-2_amd64.deb Changes: salome-gui (6.5.0-2) experimental; urgency=low . * Create SalomePyQt.so symlink properly so it's not dangling. Override entries for your package: salome-gui-dev_6.5.0-2_amd64.deb - extra devel salome-gui-doc_6.5.0-2_all.deb - extra doc salome-gui_6.5.0-2.dsc - source science salome-gui_6.5.0-2_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Thu Jul 12 08:47:43 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 08:47:43 +0000 Subject: salome-med_6.5.0-2_multi.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From ftpmaster at ftp-master.debian.org Thu Jul 12 10:41:58 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 10:41:58 +0000 Subject: Processing of scirenderer_0.5.0-1_amd64.changes Message-ID: scirenderer_0.5.0-1_amd64.changes uploaded successfully to localhost along with the files: scirenderer_0.5.0-1.dsc scirenderer_0.5.0.orig.tar.gz scirenderer_0.5.0-1.debian.tar.gz libscirenderer-java_0.5.0-1_all.deb libscirenderer-java-doc_0.5.0-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 10:47:55 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 10:47:55 +0000 Subject: scirenderer_0.5.0-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: libscirenderer-java-doc_0.5.0-1_all.deb to main/s/scirenderer/libscirenderer-java-doc_0.5.0-1_all.deb libscirenderer-java_0.5.0-1_all.deb to main/s/scirenderer/libscirenderer-java_0.5.0-1_all.deb scirenderer_0.5.0-1.debian.tar.gz to main/s/scirenderer/scirenderer_0.5.0-1.debian.tar.gz scirenderer_0.5.0-1.dsc to main/s/scirenderer/scirenderer_0.5.0-1.dsc scirenderer_0.5.0.orig.tar.gz to main/s/scirenderer/scirenderer_0.5.0.orig.tar.gz Changes: scirenderer (0.5.0-1) unstable; urgency=low . * New upstream release Override entries for your package: libscirenderer-java-doc_0.5.0-1_all.deb - optional doc libscirenderer-java_0.5.0-1_all.deb - optional java scirenderer_0.5.0-1.dsc - source java Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From julien.cristau at logilab.fr Thu Jul 12 15:21:08 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Thu, 12 Jul 2012 15:21:08 +0000 Subject: [8feb118] Fix for Bug#680359 committed to git Message-ID: tags 680359 + pending thanks Hello, The following change has been committed for this bug by Julien Cristau on Thu, 12 Jul 2012 16:15:30 +0200. The fix will be in the next upload. ==================================== Restrict shlibs to depend on the upstream version (closes: #680359) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=8feb118 From julien.cristau at logilab.fr Thu Jul 12 15:21:08 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Thu, 12 Jul 2012 15:21:08 +0000 Subject: Bug#680359: [8feb118] Fix for Bug#680359 committed to git Message-ID: tags 680359 + pending thanks Hello, The following change has been committed for this bug by Julien Cristau on Thu, 12 Jul 2012 16:15:30 +0200. The fix will be in the next upload. ==================================== Restrict shlibs to depend on the upstream version (closes: #680359) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=8feb118 From owner at bugs.debian.org Thu Jul 12 15:22:36 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Thu, 12 Jul 2012 15:22:36 +0000 Subject: Processed: [8feb118] Fix for Bug#680359 committed to git References: Message-ID: Processing commands for control at bugs.debian.org: > tags 680359 + pending Bug #680359 [paraview] paraview: non-versioned shlibs file Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 680359: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680359 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ftpmaster at ftp-master.debian.org Thu Jul 12 15:57:28 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 15:57:28 +0000 Subject: Processing of salome-geom_6.5.0-2_multi.changes Message-ID: salome-geom_6.5.0-2_multi.changes uploaded successfully to localhost along with the files: salome-geom_6.5.0-2.dsc salome-geom_6.5.0-2.diff.gz salome-geom_6.5.0-2_amd64.deb salome-geom-dev_6.5.0-2_amd64.deb salome-geom-doc_6.5.0-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 16:02:19 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 16:02:19 +0000 Subject: salome-geom_6.5.0-2_multi.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From ftpmaster at ftp-master.debian.org Thu Jul 12 16:37:33 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 16:37:33 +0000 Subject: Processing of scilab-celestlab_2.4.0-1-1_amd64.changes Message-ID: scilab-celestlab_2.4.0-1-1_amd64.changes uploaded successfully to localhost along with the files: scilab-celestlab_2.4.0-1-1.dsc scilab-celestlab_2.4.0-1.orig.tar.bz2 scilab-celestlab_2.4.0-1-1.debian.tar.gz scilab-celestlab_2.4.0-1-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 16:47:24 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 16:47:24 +0000 Subject: scilab-celestlab_2.4.0-1-1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: scilab-celestlab_2.4.0-1-1.debian.tar.gz to main/s/scilab-celestlab/scilab-celestlab_2.4.0-1-1.debian.tar.gz scilab-celestlab_2.4.0-1-1.dsc to main/s/scilab-celestlab/scilab-celestlab_2.4.0-1-1.dsc scilab-celestlab_2.4.0-1-1_all.deb to main/s/scilab-celestlab/scilab-celestlab_2.4.0-1-1_all.deb scilab-celestlab_2.4.0-1.orig.tar.bz2 to main/s/scilab-celestlab/scilab-celestlab_2.4.0-1.orig.tar.bz2 Changes: scilab-celestlab (2.4.0-1-1) experimental; urgency=low . * New upstream release Override entries for your package: scilab-celestlab_2.4.0-1-1.dsc - source math scilab-celestlab_2.4.0-1-1_all.deb - optional math Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Thu Jul 12 16:47:35 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 16:47:35 +0000 Subject: Processing of salome-smesh_6.5.0-1_multi.changes Message-ID: salome-smesh_6.5.0-1_multi.changes uploaded successfully to localhost along with the files: salome-smesh_6.5.0-1.dsc salome-smesh_6.5.0.orig.tar.gz salome-smesh_6.5.0-1.diff.gz salome-smesh_6.5.0-1_amd64.deb salome-smesh-dev_6.5.0-1_amd64.deb salome-smesh-doc_6.5.0-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 17:02:52 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 17:02:52 +0000 Subject: salome-smesh_6.5.0-1_multi.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From noreply at release.debian.org Thu Jul 12 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Thu, 12 Jul 2012 16:39:15 +0000 Subject: frog 0.12.15-3 MIGRATED to testing Message-ID: FYI: The status of the frog source package in Debian's testing distribution has changed. Previous version: 0.12.9-3 Current version: 0.12.15-3 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From bjaramillo at arap.gob.pa Thu Jul 12 17:35:37 2012 From: bjaramillo at arap.gob.pa (Mr Song Chen) Date: Thu, 12 Jul 2012 12:35:37 -0500 (EST) Subject: Good Day!! Message-ID: <1391399986.107835.1342114537060.JavaMail.root@arap.gob.pa> How is life with you over there? Please considering the fact that I sourced your email from the peoples search database on the web during my discrete search for a foreign partner whom can assist.I am Song Chen, I work with Dah Sing Bank, HONG KONG I have a Business Proposal of $12.8mUSD for you to handle with me from my bank contact me for more information (mr.songchen at yahoo.cn) Regards, Mr Song Chen. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ftpmaster at ftp-master.debian.org Thu Jul 12 17:57:58 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 17:57:58 +0000 Subject: Processing of openblas_0.2.2-1~exp1_amd64.changes Message-ID: openblas_0.2.2-1~exp1_amd64.changes uploaded successfully to localhost along with the files: openblas_0.2.2-1~exp1.dsc openblas_0.2.2.orig.tar.gz openblas_0.2.2-1~exp1.debian.tar.gz libopenblas-base_0.2.2-1~exp1_amd64.deb libopenblas-dev_0.2.2-1~exp1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 12 18:02:28 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 12 Jul 2012 18:02:28 +0000 Subject: openblas_0.2.2-1~exp1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: libopenblas-base_0.2.2-1~exp1_amd64.deb to main/o/openblas/libopenblas-base_0.2.2-1~exp1_amd64.deb libopenblas-dev_0.2.2-1~exp1_amd64.deb to main/o/openblas/libopenblas-dev_0.2.2-1~exp1_amd64.deb openblas_0.2.2-1~exp1.debian.tar.gz to main/o/openblas/openblas_0.2.2-1~exp1.debian.tar.gz openblas_0.2.2-1~exp1.dsc to main/o/openblas/openblas_0.2.2-1~exp1.dsc openblas_0.2.2.orig.tar.gz to main/o/openblas/openblas_0.2.2.orig.tar.gz Changes: openblas (0.2.2-1~exp1) experimental; urgency=low . * New upstream release * hurd.diff, hurd_gettid.diff, kfreebsd.diff, sparc.diff: remove patches, applied upstream * debian/rules: implement support for DEB_BUILD_OPTIONS=noopt Override entries for your package: libopenblas-base_0.2.2-1~exp1_amd64.deb - optional libs libopenblas-dev_0.2.2-1~exp1_amd64.deb - optional libdevel openblas_0.2.2-1~exp1.dsc - source devel Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From owner at bugs.debian.org Thu Jul 12 19:25:24 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Thu, 12 Jul 2012 19:25:24 +0000 Subject: Processed: found 673061 in 0.2.2-1~exp1 References: <1342116173-2096-bts-sebastien.villemot@ens.fr> Message-ID: Processing commands for control at bugs.debian.org: > found 673061 0.2.2-1~exp1 Bug #673061 [libopenblas-base] gimp: segfaults on startup if libopenblas-base is installed Bug #675903 [libopenblas-base] Segfault at startup Bug #679632 [libopenblas-base] gimp: Gimp crashes with OpenBlas Bug #680777 [libopenblas-base] libblas3gf: gimp is segfaulting if 'libblas3gf' is installed Marked as found in versions openblas/0.2.2-1~exp1. Marked as found in versions openblas/0.2.2-1~exp1. Marked as found in versions openblas/0.2.2-1~exp1. Marked as found in versions openblas/0.2.2-1~exp1. > thanks Stopping processing here. Please contact me if you need assistance. -- 673061: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673061 675903: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675903 679632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679632 680777: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680777 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 13 05:15:10 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 13 Jul 2012 05:15:10 +0000 Subject: Processed (with 3 errors): Re: [Debichem-devel] Bug#680825: gromacs: FTBFS: mv: cannot stat =?UTF-8?Q?`/=C2=ABPKGBUILDDIR=C2=BB/debian/gromacs-mpich/usr/lib/*.so':?= No such file or directory References: <20120713035615.GO5297@ofb.net> Message-ID: Processing commands for control at bugs.debian.org: > clone 680825 -1 Bug #680825 [src:gromacs] gromacs: FTBFS: mv: cannot stat `/??PKGBUILDDIR??/debian/gromacs-mpich/usr/lib/*.so': No such file or directory Bug 680825 cloned as bug 681428 > severity -1 normal Bug #681428 [src:gromacs] gromacs: FTBFS: mv: cannot stat `/??PKGBUILDDIR??/debian/gromacs-mpich/usr/lib/*.so': No such file or directory Severity set to 'normal' from 'serious' > reassign -1 cmake Bug #681428 [src:gromacs] gromacs: FTBFS: mv: cannot stat `/??PKGBUILDDIR??/debian/gromacs-mpich/usr/lib/*.so': No such file or directory Bug reassigned from package 'src:gromacs' to 'cmake'. No longer marked as found in versions gromacs/4.5.5-2. Ignoring request to alter fixed versions of bug #681428 to the same values previously set > retitle -1 COMPONENT option does not work in 2.8.9-rc1 Bug #681428 [cmake] gromacs: FTBFS: mv: cannot stat `/??PKGBUILDDIR??/debian/gromacs-mpich/usr/lib/*.so': No such file or directory Changed Bug title to 'COMPONENT option does not work in 2.8.9-rc1' from 'gromacs: FTBFS: mv: cannot stat `/??PKGBUILDDIR??/debian/gromacs-mpich/usr/lib/*.so': No such file or directory' > found -1 2.8.9~rc1-1 Bug #681428 [cmake] COMPONENT option does not work in 2.8.9-rc1 Marked as found in versions cmake/2.8.9~rc1-1. > notfound -1 2.8.8-3 Bug #681428 [cmake] COMPONENT option does not work in 2.8.9-rc1 Ignoring request to alter found versions of bug #681428 to the same values previously set > block 680285 by -1 Bug #680285 {Done: Anton Gladky } [yade,ipython] yade fails to build due to ipython 0.13 680285 was not blocked by any bugs. 680285 was not blocking any bugs. Added blocking bug(s) of 680285: 681428 > forwarded -1 http://cmake.org/gitweb?p=cmake.git;a=commitdiff;h=8720aa04 Bug #681428 [cmake] COMPONENT option does not work in 2.8.9-rc1 Set Bug forwarded-to-address to 'http://cmake.org/gitweb?p=cmake.git;a=commitdiff;h=8720aa04'. > Cloning the bug to cmake for tracking purposes. It's your call on the proper Unknown command or malformed arguments to command. > severity level, normal seemed fair to me from cmake's perspective. Unknown command or malformed arguments to command. > - Nicholas Unknown command or malformed arguments to command. > End of message, stopping processing here. Please contact me if you need assistance. -- 680285: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680285 680825: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680825 681428: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681428 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Fri Jul 13 05:41:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 13 Jul 2012 05:41:13 +0000 Subject: Processed: correcting a typo References: <20120713053209.GA9614@ofb.net> Message-ID: Processing commands for control at bugs.debian.org: > # oops, typoed the bug number > unblock 680285 by 681428 Bug #680285 {Done: Anton Gladky } [yade,ipython] yade fails to build due to ipython 0.13 680285 was blocked by: 681428 680285 was not blocking any bugs. Removed blocking bug(s) of 680285: 681428 > block 680825 by 681428 Bug #680825 [src:gromacs] gromacs: FTBFS: mv: cannot stat `/??PKGBUILDDIR??/debian/gromacs-mpich/usr/lib/*.so': No such file or directory 680825 was not blocked by any bugs. 680825 was not blocking any bugs. Added blocking bug(s) of 680825: 681428 > thanks Stopping processing here. Please contact me if you need assistance. -- 680285: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680285 680825: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680825 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From paumard at users.sourceforge.net Fri Jul 13 09:14:08 2012 From: paumard at users.sourceforge.net (Thibaut Paumard) Date: Fri, 13 Jul 2012 11:14:08 +0200 Subject: Bug#681452: gyoto FTBFS on mips (only on some buildds, test suite) Message-ID: <20120713091408.6088.98354.reportbug@localhost.localdomain> Source: gyoto Version: 0.0.3-1 Severity: serious Justification: fails to build from source (but built successfully in the past) The test suite hangs [lucatelli] and [corelli] but runs fine on [ball], in qemu and on gabrielli. [lucatelli] https://buildd.debian.org/status/fetch.php?pkg=gyoto&arch=mips&ver=0.0.3-4&stamp=1342069240 [corelli] https://buildd.debian.org/status/fetch.php?pkg=gyoto&arch=mips&ver=0.0.3-3&stamp=1342043550 [ball] https://buildd.debian.org/status/fetch.php?pkg=gyoto&arch=mips&ver=0.0.3-1&stamp=1341173189 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- no debconf information From nazasonbb at yahoo.com Fri Jul 13 09:50:02 2012 From: nazasonbb at yahoo.com (bamila godwill) Date: Fri, 13 Jul 2012 02:50:02 -0700 (PDT) Subject: HELLO Message-ID: <1342173002.12559.YahooMailClassic@web162305.mail.bf1.yahoo.com> hello dear? ?My name is mis bamila i saw your profile today and became intrested in you,i will also like to know you the more,and i want you to send a mail to my email address (bamila5godwill at yahoo.com) so i can give you my picture for you to know whom l am. i believe we can move from here.I am waiting for your mail to my email address above.mis bamila.(Remeber the distance or colour does not mater but love matters alot in life) Bamila -------------- next part -------------- An HTML attachment was scrubbed... URL: From ftpmaster at ftp-master.debian.org Fri Jul 13 10:04:55 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 13 Jul 2012 10:04:55 +0000 Subject: Processing of gyoto_0.0.3-5_i386.changes Message-ID: gyoto_0.0.3-5_i386.changes uploaded successfully to localhost along with the files: gyoto_0.0.3-5.dsc gyoto_0.0.3-5.debian.tar.gz gyoto-doc_0.0.3-5_all.deb gyoto_0.0.3-5_i386.deb libgyoto0_0.0.3-5_i386.deb gyoto-dbg_0.0.3-5_i386.deb libgyoto0-dev_0.0.3-5_i386.deb yorick-gyoto_0.0.3-5_i386.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Fri Jul 13 10:17:23 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 13 Jul 2012 10:17:23 +0000 Subject: gyoto_0.0.3-5_i386.changes ACCEPTED into unstable Message-ID: Accepted: gyoto-dbg_0.0.3-5_i386.deb to main/g/gyoto/gyoto-dbg_0.0.3-5_i386.deb gyoto-doc_0.0.3-5_all.deb to main/g/gyoto/gyoto-doc_0.0.3-5_all.deb gyoto_0.0.3-5.debian.tar.gz to main/g/gyoto/gyoto_0.0.3-5.debian.tar.gz gyoto_0.0.3-5.dsc to main/g/gyoto/gyoto_0.0.3-5.dsc gyoto_0.0.3-5_i386.deb to main/g/gyoto/gyoto_0.0.3-5_i386.deb libgyoto0-dev_0.0.3-5_i386.deb to main/g/gyoto/libgyoto0-dev_0.0.3-5_i386.deb libgyoto0_0.0.3-5_i386.deb to main/g/gyoto/libgyoto0_0.0.3-5_i386.deb yorick-gyoto_0.0.3-5_i386.deb to main/g/gyoto/yorick-gyoto_0.0.3-5_i386.deb Changes: gyoto (0.0.3-5) unstable; urgency=low . * skip test suite on mips as lucatelli fails on it (but it runs fine on other boxes). (Closes: 681452) Override entries for your package: gyoto-dbg_0.0.3-5_i386.deb - extra debug gyoto-doc_0.0.3-5_all.deb - extra doc gyoto_0.0.3-5.dsc - source science gyoto_0.0.3-5_i386.deb - extra science libgyoto0-dev_0.0.3-5_i386.deb - extra libdevel libgyoto0_0.0.3-5_i386.deb - extra science yorick-gyoto_0.0.3-5_i386.deb - extra science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 681452 Thank you for your contribution to Debian. From owner at bugs.debian.org Fri Jul 13 10:18:44 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 13 Jul 2012 10:18:44 +0000 Subject: Bug#681452: marked as done (gyoto FTBFS on mips (only on some buildds, test suite)) References: <20120713091408.6088.98354.reportbug@localhost.localdomain> Message-ID: Your message dated Fri, 13 Jul 2012 10:17:23 +0000 with message-id and subject line Bug#681452: fixed in gyoto 0.0.3-5 has caused the Debian Bug report #681452, regarding gyoto FTBFS on mips (only on some buildds, test suite) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 681452: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681452 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: gyoto FTBFS on mips (only on some buildds, test suite) Date: Fri, 13 Jul 2012 11:14:08 +0200 Size: 2307 URL: -------------- next part -------------- An embedded message was scrubbed... From: Thibaut Paumard Subject: Bug#681452: fixed in gyoto 0.0.3-5 Date: Fri, 13 Jul 2012 10:17:23 +0000 Size: 5781 URL: From ftpmaster at ftp-master.debian.org Fri Jul 13 11:15:04 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 13 Jul 2012 11:15:04 +0000 Subject: Processing of libgtkdatabox_0.9.1.3-1_amd64.changes Message-ID: libgtkdatabox_0.9.1.3-1_amd64.changes uploaded successfully to localhost along with the files: libgtkdatabox_0.9.1.3-1.dsc libgtkdatabox_0.9.1.3.orig.tar.gz libgtkdatabox_0.9.1.3-1.debian.tar.gz libgtkdatabox-0.9.1-3-dev_0.9.1.3-1_amd64.deb libgtkdatabox-0.9.1-3_0.9.1.3-1_amd64.deb libgtkdatabox-0.9.1-3-glade_0.9.1.3-1_amd64.deb libgtkdatabox-0.9.1-3-libglade_0.9.1.3-1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Fri Jul 13 11:17:16 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 13 Jul 2012 11:17:16 +0000 Subject: libgtkdatabox_0.9.1.3-1_amd64.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From ftpmaster at ftp-master.debian.org Fri Jul 13 14:00:15 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 13 Jul 2012 14:00:15 +0000 Subject: Processing of gmsh_2.6.0.dfsg-3_amd64.changes Message-ID: gmsh_2.6.0.dfsg-3_amd64.changes uploaded successfully to localhost along with the files: gmsh_2.6.0.dfsg-3.dsc gmsh_2.6.0.dfsg-3.debian.tar.gz gmsh_2.6.0.dfsg-3_amd64.deb libgmsh2_2.6.0.dfsg-3_amd64.deb libgmsh-dev_2.6.0.dfsg-3_all.deb gmsh-doc_2.6.0.dfsg-3_all.deb python-gmsh_2.6.0.dfsg-3_amd64.deb libjava-gmsh2_2.6.0.dfsg-3_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Fri Jul 13 14:47:15 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 13 Jul 2012 14:47:15 +0000 Subject: gmsh_2.6.0.dfsg-3_amd64.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From amsterdames200 at yahoo.fr Fri Jul 13 16:17:04 2012 From: amsterdames200 at yahoo.fr (Gaston M.) Date: Fri, 13 Jul 2012 17:17:04 +0100 (BST) Subject: lisez Message-ID: <1342196224.46116.YahooMailClassic@web29604.mail.ird.yahoo.com> Bonjour, Je me nomme GASTON MICHEL d'origine belge, directeur du d?partement de cr?dit et de r?mittence internationale de BIBE banque. J'ai la souscription d'un de nos clients Monsieur Kalidou Aliou Ben Amad ?trangers qui a trouv? la mort avec toute sa famille enti?re dans un crash d'avion survenu le 25 D?cembre 2003 ? l'a?roport International CBG (Cardinal Bernardin Ganti).Sur son compte a ?t? d?couvert 11 million $ US (ONZE MILLION de dollars am?ricain). Consultez le site web pour revivre le crash de l'avion: http://www.sangonet.com/Fich6ActuaInterAfric/accident-avion-Benin25dec03.html Je vous contacte pour une coop?ration honn?te pouvant nous permettre de transf?rer cet argent dans votre compte. je vous rappelle que cette transaction est l?gale car cet argent n'appartient ? personne et que tous les agencements exig?s ont ?t? pris pour mener ? bien le transfert sans risque aucun pour les deux partis (vous et moi).Je vous donnerai plus de d?tails si vous me donnez votre accord pour un partenariat gagnant . L'argent sera transf?r? dans le compte de tr?sor de banque comme bien des fonds ? la fin de l'ann?e 2013 si personne ne le r?clame selon les directives d'op?ration bancaire r?gis par la loi et voici nous sommes au d?but l?ann?e 2012. Je vous prie donc de faire diligence pour que nous jouissions de cette coop?ration. je tiens a vous rappeler que le fonds sera partag? ? la proportion de 58 % pour moi; 40 % pour vous et 2 % seront mis de c?t? pour couvrir n'importe quelles d?penses et imp?t(taxe) dans votre banque. Traitez s'il vous pla?t cette proposition d'affaires avec la confidentialit? extr?me et envoyez-moi un mail dans ma boite personnelle pour confirmation. Ne laissez pas passer cette affaire qui pourra changer nos vies. ?E-mail: gasmich at yahoo.be Remerciements et meilleures salutations. Cordialement ? ?GASTON M. -------------- next part -------------- An HTML attachment was scrubbed... URL: From owner at bugs.debian.org Fri Jul 13 20:15:08 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 13 Jul 2012 20:15:08 +0000 Subject: Processed: tagging as pending bugs that are closed by packages in NEW References: <20120713200310.6B23E805BE2A@elida.v7w.com> Message-ID: Processing commands for control at bugs.debian.org: > # Friday 13 July 20:03:07 UTC 2012 > # Tagging as pending bugs that are closed by packages in NEW > # http://ftp-master.debian.org/new.html > # > # Source package in NEW: libgtkdatabox > tags 640004 + pending Bug #640004 [libgtkdatabox] package ftbfs when warning about implicitly converted to pointer Added tag(s) pending. > End of message, stopping processing here. Please contact me if you need assistance. -- 640004: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=640004 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From abrarfun at ymail.com Fri Jul 13 21:50:44 2012 From: abrarfun at ymail.com (Gloria Ibrahim Asrat) Date: Fri, 13 Jul 2012 14:50:44 -0700 (PDT) Subject: hello Message-ID: <1342216244.51837.YahooMailClassic@web120705.mail.ne1.yahoo.com> Il mio piacere di scriverti dopo aver entrare in contatto con la tua e-mail, mi d? un onoreamico e anche io sto cercando amici che ho potuto la mia parte i miei interessipersona molto ottimista e che ? realistico per la natura, molto didattico, timorato di Dio donna, vorrei che noi diventiamo amici e ho l'onore di inviare un invito per l'amicizia, la prego di accettare la mia proposta e mi scrivi indietro in modo che ci conosciamo meglio e in modo efficiente. Ti auguro tutto il meglio essere tuo con, io sono una La signorina Gloria -------------- next part -------------- An HTML attachment was scrubbed... URL: From tdittmar at ucsd.edu Sat Jul 14 01:17:55 2012 From: tdittmar at ucsd.edu (Timo Dittmar) Date: Fri, 13 Jul 2012 18:17:55 -0700 Subject: Bug#681535: [qtiplot] qtiplot crahes on startup with siplib error message Message-ID: <5000C8C3.8060203@ucsd.edu> Package: qtiplot Version: 0.9.8.8-5+b1 Severity: normal --- Please enter the report below this line. --- qtiplot crashes with the following error message during startup: qtiplot: /build/buildd-sip4_4.13.3-2-amd64-4XEr_m/sip4-4.13.3/siplib/siplib.c:10965: sipEnumType_alloc: Zusicherung ?(((currentType)->td_flags & 0x0007) == 0x0003)? nicht erf?llt. I tested qtiplot versions 0.9.8.8-5+b1 and 0.9.8.8-2 with different combinations of python-sip (4.13.3-2 and 4.12.3-1), all with the same result. The much older qtiplot 0.9.8.4.2 does not start due to incompatibilities with the installed python version. Timo --- System information. --- Architecture: amd64 Kernel: Linux 3.2.0-3-amd64 Debian Release: wheezy/sid 500 testing snapshot.debian.org 500 testing ftp.utexas.edu 500 testing ftp.debian-multimedia.org 500 testing debian.rub.de --- Package information. --- Depends (Version) | Installed ============================================-+-=================== libalglib-2.6.0 (>= 2.6.0) | 2.6.0-6 libc6 (>= 2.4) | 2.13-33 libgcc1 (>= 1:4.1.1) | 1:4.7.1-2 libgl1-mesa-glx | 8.0.3-1 OR libgl1 | libgl2ps0 | 1.3.6-1 libglu1-mesa | 8.0.3-1 OR libglu1 | libgsl0ldbl (>= 1.9) | 1.15+dfsg-1 libmuparser2 (>= 2.1.0) | 2.1.0-3 liborigin2-1 | 2:20110117-1+b2 libpng12-0 (>= 1.2.13-4) | 1.2.49-1 libpython2.7 (>= 2.7) | 2.7.3~rc2-2.1 libqt4-network (>= 4:4.5.3) | 4:4.8.2-1 libqt4-opengl (>= 4:4.5.3) | 4:4.8.2-1 libqt4-qt3support (>= 4:4.5.3) | 4:4.8.2-1 libqt4-svg (>= 4:4.5.3) | 4:4.8.2-1 libqt4-xml (>= 4:4.5.3) | 4:4.8.2-1 libqtassistantclient4 (>= 4.6.3) | 4.6.3-4 libqtcore4 (>= 4:4.7.0~beta1) | 4:4.8.2-1 libqtexengine1 (>= 0.3) | 0.3-3 libqtgui4 (>= 4:4.6.1) | 4:4.8.2-1 libstdc++6 (>= 4.6) | 4.7.1-2 libtamuanova-0.2 (>= 0.2) | 0.2-2 zlib1g (>= 1:1.1.4) | 1:1.2.7.dfsg-13 python-qt4 | 4.9.1-5 python-sip (>= 4.9-1) | 4.13.3-2 python (>= 2.6.6-7~) | 2.7.3~rc2-1 Recommends (Version) | Installed ==================================-+-=========== qt-assistant-compat | 4.6.3-4 qtiplot-doc | 0.9.8.8-5 Package's Suggests field is empty. From ftpmaster at ftp-master.debian.org Sat Jul 14 06:52:31 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sat, 14 Jul 2012 06:52:31 +0000 Subject: Processing of paraview_3.14.1-7_amd64.changes Message-ID: paraview_3.14.1-7_amd64.changes uploaded successfully to localhost along with the files: paraview_3.14.1-7.dsc paraview_3.14.1.orig.tar.gz paraview_3.14.1-7.debian.tar.gz paraview_3.14.1-7_amd64.deb paraview-dev_3.14.1-7_amd64.deb paraview-doc_3.14.1-7_all.deb paraview-python_3.14.1-7_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sat Jul 14 07:02:22 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sat, 14 Jul 2012 07:02:22 +0000 Subject: paraview_3.14.1-7_amd64.changes ACCEPTED into unstable Message-ID: Warnings: ignoring paraview_3.14.1.orig.tar.gz, since it's already in the archive. Accepted: paraview-dev_3.14.1-7_amd64.deb to main/p/paraview/paraview-dev_3.14.1-7_amd64.deb paraview-doc_3.14.1-7_all.deb to main/p/paraview/paraview-doc_3.14.1-7_all.deb paraview-python_3.14.1-7_amd64.deb to main/p/paraview/paraview-python_3.14.1-7_amd64.deb paraview_3.14.1-7.debian.tar.gz to main/p/paraview/paraview_3.14.1-7.debian.tar.gz paraview_3.14.1-7.dsc to main/p/paraview/paraview_3.14.1-7.dsc paraview_3.14.1-7_amd64.deb to main/p/paraview/paraview_3.14.1-7_amd64.deb Changes: paraview (3.14.1-7) unstable; urgency=low . [ Anton Gladky ] * [fd77b28] Add missing epoch in libavformat-dev version. Thanks to Jakub Wilk. http://lists.debian.org/debian-devel/2012/07/msg00086.html * [155d23c] Use compat 9 to harden buildflags. * [bdef31b] Add -Wall -pedantic -Wl,--as-needed to buildflags. . [ Julien Cristau ] * [8feb118] Restrict shlibs to depend on the upstream version. (Closes: #680359) Override entries for your package: paraview-dev_3.14.1-7_amd64.deb - extra libdevel paraview-doc_3.14.1-7_all.deb - extra doc paraview-python_3.14.1-7_amd64.deb - extra python paraview_3.14.1-7.dsc - source science paraview_3.14.1-7_amd64.deb - extra science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 680359 Thank you for your contribution to Debian. From owner at bugs.debian.org Sat Jul 14 07:06:11 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Jul 2012 07:06:11 +0000 Subject: Bug#680359: marked as done (paraview: non-versioned shlibs file) References: <20120705103555.GA12897@crater2.logilab.fr> Message-ID: Your message dated Sat, 14 Jul 2012 07:02:22 +0000 with message-id and subject line Bug#680359: fixed in paraview 3.14.1-7 has caused the Debian Bug report #680359, regarding paraview: non-versioned shlibs file to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680359: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680359 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Julien Cristau Subject: paraview: non-versioned shlibs file Date: Thu, 5 Jul 2012 12:35:57 +0200 Size: 1967 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Bug#680359: fixed in paraview 3.14.1-7 Date: Sat, 14 Jul 2012 07:02:22 +0000 Size: 6299 URL: From rossantawadarrinis at yahoo.com Sat Jul 14 10:20:43 2012 From: rossantawadarrinis at yahoo.com (=?utf-8?Q?... =E9=A0=85=E5=AD=9D=E7=90=B4 ...?=) Date: 14 Jul 2012 18:20:43 +0800 Subject: =?utf-8?B?5L2g55yf55qE5rS755qEICAgICAgICDlg4/lgIvkurrll44/Li4uLi4u6KiI56iL6LuK?= Message-ID: <570057.74851.bm@smtp141.mail.mud.yahoo.com> An HTML attachment was scrubbed... URL: From codehelp at debian.org Sat Jul 14 15:04:34 2012 From: codehelp at debian.org (Neil Williams) Date: Sat, 14 Jul 2012 09:04:34 -0600 Subject: Bug#681589: givaro: uses system include syntax for local header Message-ID: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> Source: givaro Version: 3.7.0-2 Severity: serious Justification: breaks reverse dependencies Tag: patch http://gcc.gnu.org/onlinedocs/cpp/Include-Syntax.html#Include-Syntax givaro-3.7.0/src/kernel/gmp++/gmp++.h specifies an include for one of it's own header files (gmpxx.h) using system include syntax instead of local include syntax. This has two effects: 0: If /usr/include/gmp++/gmp++.h exists when givaro is built, that will be used in preference to the (possibly modified) copy in ./src/kernel/gmp ++/ 1: linbox and other packages which use givaro_check.m4 will fail to build from source because gmpxx.h cannot be found by the configure check. The syntax needs to be changed but also, if givaro used pkg-config, there would be no need for givaro_check.m4 in the first place. -- Neil Williams ============= http://www.linux.codehelp.co.uk/ -------------- next part -------------- A non-text attachment was scrubbed... Name: header.diff Type: text/x-diff Size: 353 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: not available URL: From owner at bugs.debian.org Sat Jul 14 15:39:15 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Jul 2012 15:39:15 +0000 Subject: Processed: givaro: changed API without SONAME bump References: <20120714093803.8f2554104dce5e42a64f90a5@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > notfound 678769 1.1.6~rc0-4.2 Bug #678769 [src:linbox] linbox: FTBFS: ERROR: GIVARO not found! No longer marked as found in versions linbox/1.1.6~rc0-4.2. > reassign 678769 src:givaro Bug #678769 [src:linbox] linbox: FTBFS: ERROR: GIVARO not found! Bug reassigned from package 'src:linbox' to 'src:givaro'. Ignoring request to alter found versions of bug #678769 to the same values previously set Ignoring request to alter fixed versions of bug #678769 to the same values previously set > affects 678769 linbox Bug #678769 [src:givaro] linbox: FTBFS: ERROR: GIVARO not found! Added indication that 678769 affects linbox > affects 678769 fflas-ffpack Bug #678769 [src:givaro] linbox: FTBFS: ERROR: GIVARO not found! Added indication that 678769 affects fflas-ffpack > retitle 678769 givaro: changed ABI without SONAME bump Bug #678769 [src:givaro] linbox: FTBFS: ERROR: GIVARO not found! Changed Bug title to 'givaro: changed ABI without SONAME bump' from 'linbox: FTBFS: ERROR: GIVARO not found!' > found 678769 3.7.0-2 Bug #678769 [src:givaro] givaro: changed ABI without SONAME bump Marked as found in versions givaro/3.7.0-2. > thanks Stopping processing here. Please contact me if you need assistance. -- 678769: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678769 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Sat Jul 14 15:45:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Jul 2012 15:45:04 +0000 Subject: Processed: block References: <20120714094115.b12bc627dd0beed91f154f25@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > block 681589 by 678769 Bug #681589 [src:givaro] givaro: uses system include syntax for local header 681589 was not blocked by any bugs. 681589 was not blocking any bugs. Added blocking bug(s) of 681589: 678769 > thanks Stopping processing here. Please contact me if you need assistance. -- 681589: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681589 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Sat Jul 14 16:03:05 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 14 Jul 2012 16:03:05 +0000 Subject: Processed: typo References: <20120714100002.8506d26f80fa1b7725c8e71b@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > retitle 678769 givaro: changed API without SONAME bump Bug #678769 [src:givaro] givaro: changed ABI without SONAME bump Changed Bug title to 'givaro: changed API without SONAME bump' from 'givaro: changed ABI without SONAME bump' > thanks Stopping processing here. Please contact me if you need assistance. -- 678769: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678769 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From lifongsun at gmail.com Sat Jul 14 16:43:32 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Sun, 15 Jul 2012 00:43:32 +0800 Subject: Bug#681589: givaro: uses system include syntax for local header In-Reply-To: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> References: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> Message-ID: <20120714164332.GB2722@string> Hi Neil, On 09:04 Sat 07/14/12 Jul , Neil Williams wrote: > givaro-3.7.0/src/kernel/gmp++/gmp++.h specifies an include for one of > it's own header files (gmpxx.h) using system include syntax instead of Thanks for report. Actually gmpxx.h is a header file of libgmp-dev, and givaro contains no file named gmpxx.h, so IMHO this is not a bug. However, givaro-3.7.0/src/kernel/zpz/StaticElement.h does include givaro's own header file (gmp++.h) using system include syntax. I would like to fix it in the next upload (givaro_3.7.1-1). > 1: linbox and other packages which use givaro_check.m4 will fail to > build from source because gmpxx.h cannot be found by the configure > check. The FTBFS bug of linbox in sid is likely caused by givaro API incompatibility. I would file an RFS for linbox-1.3.2 to fix the bug if Vincent Danjean is no longer interested in this package (I got permission from Tim Abbott to adopt linbox and other SAGE-related packages). Thanks, Lifeng -- From codehelp at debian.org Sat Jul 14 17:42:26 2012 From: codehelp at debian.org (Neil Williams) Date: Sat, 14 Jul 2012 11:42:26 -0600 Subject: Bug#681589: givaro: uses system include syntax for local header In-Reply-To: <20120714164332.GB2722@string> References: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> <20120714164332.GB2722@string> Message-ID: <20120714114226.f2c504d5ca9e8b29266c0f07@debian.org> On Sun, 15 Jul 2012 00:43:32 +0800 Lifeng Sun wrote: > Hi Neil, > > On 09:04 Sat 07/14/12 Jul , Neil Williams wrote: > > givaro-3.7.0/src/kernel/gmp++/gmp++.h specifies an include for one of > > it's own header files (gmpxx.h) using system include syntax instead of > > Thanks for report. Actually gmpxx.h is a header file of libgmp-dev, > and givaro contains no file named gmpxx.h, so IMHO this is not a bug. OK, in that case, givaro_check.m4 is irretrievably broken and givaro needs to provide pkg-config support which linbox can use instead. givaro_check tries to link a test program against libgivaro0 simply by including the givinteger.h header and this *was* a valid method for older versions of givaro. > > 1: linbox and other packages which use givaro_check.m4 will fail to > > build from source because gmpxx.h cannot be found by the configure > > check. > > The FTBFS bug of linbox in sid is likely caused by givaro API > incompatibility. It definitely is - however, even if givaro migrates API, linbox will still not get a valid result from givaro_check.m4. Givaro can help this situation by providing a givaro.pc file. > I would file an RFS for linbox-1.3.2 to fix the bug > if Vincent Danjean is no longer interested in this package (I got > permission from Tim Abbott to adopt linbox and other SAGE-related > packages). There is no point thinking about uploading libgivaro1 without talking to the release team who are unlikely to want a new transition at this point. See #678769 - that's why I blocked this bug by #678769. At this stage of the release freeze, the release team may be more willing to consider removing givaro, linbox and fflas-ffpack. This problem should have been noticed before the 3.7.0-1 upload. It is difficult to fix now and you should talk to the release team about what can be done and whether givaro can be released as part of Wheezy. Currently, it looks unlikely. Squeeze already has 3.2.13-1 which linbox can build against. Therefore, it seems more appropriate to have no givaro or linbox packages in Wheezy and let users pull in the working versions from Squeeze. True, that means that users miss out on improvements in linbox since Squeeze but that is the result of maintainers allowing libgivaro0 to migrate into testing at version 3.7.0 when that should have been libgivaro1. -- Neil Williams ============= http://www.linux.codehelp.co.uk/ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: not available URL: From ralph.ronnquist at gmail.com Sun Jul 15 02:53:35 2012 From: ralph.ronnquist at gmail.com (Ralph Ronnquist) Date: Sun, 15 Jul 2012 12:53:35 +1000 Subject: Bug#681646: gnuplot: somtimes forgets previous command (can't see it in history either) Message-ID: <20120715025335.31945.49023.reportbug@studio.home> Package: gnuplot Version: 4.6.0-8 Severity: normal Dear Maintainer, now and then gnuplot seems to fail to store the command in its history, so I can't recall it by ^P or up-arrow or any history command. In my typical use, I recall previous command, make an edit and push . It usually works fine, but sometimes gnuplots fails to remember the command, so on next recall, I instead get a previous (what I did 2 command lines ago). When it start, gnuplot insists on not remembering that same command line, while it happily remembers other command lines in between, whether I retype it manually, or recall it from history way back. The following is a snapshot of gnuplot history: 635 wx=0;w=12;t=t2;h=800;load "plot1" 636 wx=0;w=12;t=t2;h=800;load "plot1" 637 wx=0;w=12;t=t2;h=800;load "plot1" 638 wx=0;w=8;t=t2;h=800;load "plot1" 639 wx=0;w=8;t=6000;h=800;load "plot1" 640 wx=0;w=8;t=6000;h=800;load "plot1" Here I actually tried a callback form #639, to reuse #638, but that didn't work, so I retyped #638, which is not seen in the history. Then I used recall (up-arrow) from a earlier command (way up), which it remembered as #639. Then I tried again by retyping #638, which also did not go into the history, and #640 is a subsequent recall of #639. When it happens, that command line cannot be entered into the history, if I add two spaces to the bigging it gets remembered. It happens often enough to be a bother, but not often enough to be a nuisance :-) and I haven't worked out a more detailed case pattern. Possibly it has something to do with that the line first is by a recall where I deleted the first few characters (up to a semicolon). -- System Information: Debian Release: 6.0.5 APT prefers testing APT policy: (1001, 'testing'), (1000, 'stable'), (500, 'stable-updates') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnuplot depends on: ii gnuplot-x11 [gnuplot-nox] 4.6.0-8 gnuplot recommends no packages. Versions of packages gnuplot suggests: pn gnuplot-doc -- no debconf information From ftpmaster at ftp-master.debian.org Sun Jul 15 03:01:08 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 03:01:08 +0000 Subject: Processing of opencv_2.4.1+dfsg-0exp2_amd64.changes Message-ID: opencv_2.4.1+dfsg-0exp2_amd64.changes uploaded successfully to localhost along with the files: opencv_2.4.1+dfsg-0exp2.dsc opencv_2.4.1+dfsg-0exp2.debian.tar.gz opencv-doc_2.4.1+dfsg-0exp2_all.deb libcv-dev_2.4.1+dfsg-0exp2_amd64.deb libcv2.4_2.4.1+dfsg-0exp2_all.deb libhighgui-dev_2.4.1+dfsg-0exp2_amd64.deb libhighgui2.4_2.4.1+dfsg-0exp2_all.deb libcvaux-dev_2.4.1+dfsg-0exp2_amd64.deb libcvaux2.4_2.4.1+dfsg-0exp2_all.deb libopencv-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-core-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-core2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-ml-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-ml2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-imgproc-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-imgproc2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-video-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-video2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-objdetect-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-objdetect2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-highgui-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-highgui2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-calib3d-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-calib3d2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-flann-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-flann2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-features2d-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-features2d2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-legacy-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-legacy2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-contrib-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-contrib2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-ts-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-ts2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-photo-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-photo2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-videostab-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-videostab2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-stitching-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-stitching2.4_2.4.1+dfsg-0exp2_amd64.deb python-opencv_2.4.1+dfsg-0exp2_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 15 03:03:15 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 03:03:15 +0000 Subject: opencv_2.4.1+dfsg-0exp2_amd64.changes ACCEPTED into experimental Message-ID: Accepted: libcv-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libcv-dev_2.4.1+dfsg-0exp2_amd64.deb libcv2.4_2.4.1+dfsg-0exp2_all.deb to main/o/opencv/libcv2.4_2.4.1+dfsg-0exp2_all.deb libcvaux-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libcvaux-dev_2.4.1+dfsg-0exp2_amd64.deb libcvaux2.4_2.4.1+dfsg-0exp2_all.deb to main/o/opencv/libcvaux2.4_2.4.1+dfsg-0exp2_all.deb libhighgui-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libhighgui-dev_2.4.1+dfsg-0exp2_amd64.deb libhighgui2.4_2.4.1+dfsg-0exp2_all.deb to main/o/opencv/libhighgui2.4_2.4.1+dfsg-0exp2_all.deb libopencv-calib3d-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-calib3d-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-calib3d2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-calib3d2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-contrib-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-contrib-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-contrib2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-contrib2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-core-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-core-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-core2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-core2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-features2d-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-features2d-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-features2d2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-features2d2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-flann-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-flann-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-flann2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-flann2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-highgui-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-highgui-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-highgui2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-highgui2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-imgproc-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-imgproc-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-imgproc2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-imgproc2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-legacy-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-legacy-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-legacy2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-legacy2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-ml-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-ml-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-ml2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-ml2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-objdetect-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-objdetect-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-objdetect2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-objdetect2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-photo-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-photo-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-photo2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-photo2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-stitching-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-stitching-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-stitching2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-stitching2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-ts-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-ts-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-ts2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-ts2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-video-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-video-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-video2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-video2.4_2.4.1+dfsg-0exp2_amd64.deb libopencv-videostab-dev_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-videostab-dev_2.4.1+dfsg-0exp2_amd64.deb libopencv-videostab2.4_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/libopencv-videostab2.4_2.4.1+dfsg-0exp2_amd64.deb opencv-doc_2.4.1+dfsg-0exp2_all.deb to main/o/opencv/opencv-doc_2.4.1+dfsg-0exp2_all.deb opencv_2.4.1+dfsg-0exp2.debian.tar.gz to main/o/opencv/opencv_2.4.1+dfsg-0exp2.debian.tar.gz opencv_2.4.1+dfsg-0exp2.dsc to main/o/opencv/opencv_2.4.1+dfsg-0exp2.dsc python-opencv_2.4.1+dfsg-0exp2_amd64.deb to main/o/opencv/python-opencv_2.4.1+dfsg-0exp2_amd64.deb Changes: opencv (2.4.1+dfsg-0exp2) experimental; urgency=low . * Update package description. * Add patches/pkg-config.patch. This changed library specification method in pkgconfig. Override entries for your package: libcv-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libcv2.4_2.4.1+dfsg-0exp2_all.deb - optional devel libcvaux-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libcvaux2.4_2.4.1+dfsg-0exp2_all.deb - optional devel libhighgui-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libhighgui2.4_2.4.1+dfsg-0exp2_all.deb - optional devel libopencv-calib3d-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-calib3d2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-contrib-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-contrib2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-core-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-core2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-features2d-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-features2d2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-flann-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-flann2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-highgui-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-highgui2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-imgproc-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-imgproc2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-legacy-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-legacy2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-ml-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-ml2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-objdetect-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-objdetect2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-photo-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-photo2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-stitching-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-stitching2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-ts-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-ts2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-video-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-video2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs libopencv-videostab-dev_2.4.1+dfsg-0exp2_amd64.deb - optional libdevel libopencv-videostab2.4_2.4.1+dfsg-0exp2_amd64.deb - optional libs opencv-doc_2.4.1+dfsg-0exp2_all.deb - optional doc opencv_2.4.1+dfsg-0exp2.dsc - source devel python-opencv_2.4.1+dfsg-0exp2_amd64.deb - optional python Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From lifongsun at gmail.com Sun Jul 15 05:17:31 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Sun, 15 Jul 2012 13:17:31 +0800 Subject: Bug#681589: givaro: uses system include syntax for local header In-Reply-To: <20120714114226.f2c504d5ca9e8b29266c0f07@debian.org> References: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> <20120714164332.GB2722@string> <20120714114226.f2c504d5ca9e8b29266c0f07@debian.org> Message-ID: <20120715051731.GC2722@string> Hi release team, Could you please remove givaro, fflas-ffpack and linbox from testing if you don't want to make a new transition from libgivaro0 to libgivaro1? Thanks. Regards, Lifeng On 11:42 Sat 07/14/12 Jul , Neil Williams wrote: > OK, in that case, givaro_check.m4 is irretrievably broken and givaro > needs to provide pkg-config support which linbox can use instead. > > givaro_check tries to link a test program against libgivaro0 simply by > including the givinteger.h header and this *was* a valid method for > older versions of givaro. > > > > 1: linbox and other packages which use givaro_check.m4 will fail to > > > build from source because gmpxx.h cannot be found by the configure > > > check. > > > > The FTBFS bug of linbox in sid is likely caused by givaro API > > incompatibility. > > It definitely is - however, even if givaro migrates API, linbox will > still not get a valid result from givaro_check.m4. Givaro can help this > situation by providing a givaro.pc file. > > > I would file an RFS for linbox-1.3.2 to fix the bug > > if Vincent Danjean is no longer interested in this package (I got > > permission from Tim Abbott to adopt linbox and other SAGE-related > > packages). > > There is no point thinking about uploading libgivaro1 without talking > to the release team who are unlikely to want a new transition at this > point. See #678769 - that's why I blocked this bug by #678769. > > At this stage of the release freeze, the release team may be more > willing to consider removing givaro, linbox and fflas-ffpack. > > This problem should have been noticed before the 3.7.0-1 upload. It is > difficult to fix now and you should talk to the release team about what > can be done and whether givaro can be released as part of Wheezy. > Currently, it looks unlikely. -- -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: From vdanjean at debian.org Sun Jul 15 08:56:21 2012 From: vdanjean at debian.org (Vincent Danjean) Date: Sun, 15 Jul 2012 10:56:21 +0200 Subject: Bug#681589: givaro: uses system include syntax for local header In-Reply-To: <20120714164332.GB2722@string> References: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> <20120714164332.GB2722@string> Message-ID: <500285B5.10107@debian.org> Le 14/07/2012 18:43, Lifeng Sun a ?crit : > The FTBFS bug of linbox in sid is likely caused by givaro API > incompatibility. I would file an RFS for linbox-1.3.2 to fix the bug > if Vincent Danjean is no longer interested in this package (I got > permission from Tim Abbott to adopt linbox and other SAGE-related > packages). For me, you can go ahead. I never found the time to properly work on the linbox package. I would be pleased if you can do the work. Regards, Vincent From abe at debian.org Sun Jul 15 19:31:47 2012 From: abe at debian.org (Axel Beckert) Date: Sun, 15 Jul 2012 21:31:47 +0200 Subject: Bug#681713: lintian: Please add a test which checks Vcs-Browser headers for hardcoded revisions/commits Message-ID: <87a9z0n7mk.fsf@nemo.deuxchevaux.org> Package: lintian Version: 2.5.10 Severity: wishlist Dear Lintian Maintainers, today I noticed that the Vcs-Browser header of the debian-junior source package included query string ?rev=0&sc=0 which leads to an empty view of the repository (due to containing no commit). See http://bugs.debian.org/681709 for details. To keep the header useful even for people without any knowledge of the used VCS viewer, suffixes like this should never be included in the Vcs-Browser header. After filing the bug report I noticed that many more package are affected by the same issue, although mostly from the Debian Pure Blend, Debian Science and Debian Med teams (X-Debbugs-Cc'ed): $ fgrep -h rev= /var/lib/apt/lists/ftp.ch.debian.org_debian_dists_{experimental,sid}_main_source_Sources | sort -u Vcs-Browser: https://labs.riseup.net/code/projects/backupninja/repository/show?rev=debian Vcs-Browser: http://svn.debian.org/wsvn/blends/blends/trunk/blends/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/blends/projects/debichem/trunk/debichem/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/blends/projects/ezgo/trunk/debian-ezgo/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/blends/projects/gis/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/blends/projects/junior/trunk/debian-junior/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/cdd/cdd/trunk/cdd/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/collab-maint/ext-maint/alpine/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-edu/trunk/src/debian-edu/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-edu/trunk/src/libpam-mklocaluser/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-edu/trunk/src/sitesummary/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/pkg-games/packages/trunk/box2d/box2d-2.0.1/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/community/infrastructure/getData/?rev=0&sc=0trunk Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/abacas/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/alien-hunter/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/amap-align/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/ampliconnoise/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/biococoa/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/ctn/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/dialign/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/dialign-t/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/dotur/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/emboss-explorer/trunk/?rev=0&sc=0trunk Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/ensembl/libbio-das-lite-perl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/figtree/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/glam2/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/igstk/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/insighttoolkit/wrapitk/python/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libace-perl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libbio-mage-perl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libbio-mage-utils-perl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libctapimkt/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libg2/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libgenome/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libgo-perl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libjam-java/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/libjebl2-java/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/loki/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/melting/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/mencal/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/minc/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/mriconvert/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/muscle/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/plasmidomics/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/primer3/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/probalign/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/python-biopython/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/python-cogent/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/pythonqt/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/rostlab/disulfinder/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/rostlab/libai-fann-perl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/rostlab/pp-popularity-contest/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/rostlab/profnet/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/R/r-bioc-hilbertvis/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/R/r-cran-epitools/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/R/r-cran-g.data/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/R/r-cran-medadherence/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/seqan/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/sibsim4/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/sim4/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/snap/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/srf/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/staden-io-lib/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/tigr-glimmer/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/volpack/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/vxl/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/cimg/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/libgtkdatabox/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/openigtlink/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/R/r-cran-amore/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/R/r-cran-colorspace/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/R/r-cran-msm/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/R/r-cran-sp/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/R/r-cran-teachingdemos/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/R/r-cran-xtable/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/slicer/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/debian-science/packages/z88/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/pkg-discover/discover-data/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/pkg-escience/sumo-analyzer/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/pkg-escience/torque/trunk/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/pkg-exppsy/psignifit/?rev=0&sc=0 Vcs-Browser: http://svn.debian.org/wsvn/pkg-postgresql/trunk/postgresql-plr/?rev=0&sc=0 Since mass-bug-filing is surely not the right way in this case, I strongly suggest a lintian source control header check for such URLs. The above fgrep search though already brought one false positive to daylight: Vcs-Browser: https://labs.riseup.net/code/projects/backupninja/repository/show?rev=debian So maybe the check should only egrep for rev=[0-9] or similar. The test could likely be adopted to other VCS and maybe other web-based repository viewers, but at least a search for hardcoded git commits currently luckily is unsuccessful: egrep -h '^Vcs-Browser.*h=[0-9a-fA-F]' /var/lib/apt/lists/ftp.ch.debian.org_debian_dists_{experimental,sid}_main_source_Sources | sort -u -- Regards, Axel From adam at adam-barratt.org.uk Sun Jul 15 20:40:41 2012 From: adam at adam-barratt.org.uk (Adam D. Barratt) Date: Sun, 15 Jul 2012 21:40:41 +0100 Subject: Bug#681589: givaro: uses system include syntax for local header In-Reply-To: <20120715051731.GC2722@string> References: <20120714090434.a04c650c0b097d17ae266e3b@debian.org> <20120714164332.GB2722@string> <20120714114226.f2c504d5ca9e8b29266c0f07@debian.org> <20120715051731.GC2722@string> Message-ID: <1342384841.23566.13.camel@jacala.jungle.funky-badger.org> On Sun, 2012-07-15 at 13:17 +0800, Lifeng Sun wrote: > Could you please remove givaro, fflas-ffpack and linbox from testing > if you don't want to make a new transition from libgivaro0 to > libgivaro1? Thanks. Avoiding a new transition at this point would be preferable I'm afraid. linbox looks unmaintained, fflas-ffpack has only been in the archive since the day before freeze and givaro was unmaintained until a few weeks ago. I've added the relevant removal hints; thanks for your work on the packages, it's unfortunate that these issues occurred so close to the freeze. Regards, Adam From ftpmaster at ftp-master.debian.org Sun Jul 15 22:07:25 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 22:07:25 +0000 Subject: Processing of herwig++_2.6.0-1_amd64.changes Message-ID: herwig++_2.6.0-1_amd64.changes uploaded successfully to localhost along with the files: herwig++_2.6.0-1.dsc herwig++_2.6.0.orig.tar.gz herwig++_2.6.0-1.debian.tar.gz herwig++_2.6.0-1_amd64.deb herwig++-dev_2.6.0-1_amd64.deb herwig++-data_2.6.0-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 15 22:17:12 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 22:17:12 +0000 Subject: herwig++_2.6.0-1_amd64.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From ftpmaster at ftp-master.debian.org Sun Jul 15 22:52:32 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 22:52:32 +0000 Subject: Processing of code-saturne_2.2.1-1~exp1_amd64.changes Message-ID: code-saturne_2.2.1-1~exp1_amd64.changes uploaded successfully to localhost along with the files: code-saturne_2.2.1-1~exp1.dsc code-saturne_2.2.1.orig.tar.gz code-saturne_2.2.1-1~exp1.debian.tar.gz code-saturne-data_2.2.1-1~exp1_all.deb code-saturne-doc_2.2.1-1~exp1_all.deb code-saturne_2.2.1-1~exp1_amd64.deb code-saturne-bin_2.2.1-1~exp1_amd64.deb code-saturne-include_2.2.1-1~exp1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 15 23:02:12 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 23:02:12 +0000 Subject: code-saturne_2.2.1-1~exp1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: code-saturne-bin_2.2.1-1~exp1_amd64.deb to main/c/code-saturne/code-saturne-bin_2.2.1-1~exp1_amd64.deb code-saturne-data_2.2.1-1~exp1_all.deb to main/c/code-saturne/code-saturne-data_2.2.1-1~exp1_all.deb code-saturne-doc_2.2.1-1~exp1_all.deb to main/c/code-saturne/code-saturne-doc_2.2.1-1~exp1_all.deb code-saturne-include_2.2.1-1~exp1_amd64.deb to main/c/code-saturne/code-saturne-include_2.2.1-1~exp1_amd64.deb code-saturne_2.2.1-1~exp1.debian.tar.gz to main/c/code-saturne/code-saturne_2.2.1-1~exp1.debian.tar.gz code-saturne_2.2.1-1~exp1.dsc to main/c/code-saturne/code-saturne_2.2.1-1~exp1.dsc code-saturne_2.2.1-1~exp1_amd64.deb to main/c/code-saturne/code-saturne_2.2.1-1~exp1_amd64.deb code-saturne_2.2.1.orig.tar.gz to main/c/code-saturne/code-saturne_2.2.1.orig.tar.gz Changes: code-saturne (2.2.1-1~exp1) experimental; urgency=low . * New upstream release Override entries for your package: code-saturne-bin_2.2.1-1~exp1_amd64.deb - optional science code-saturne-data_2.2.1-1~exp1_all.deb - optional science code-saturne-doc_2.2.1-1~exp1_all.deb - optional science code-saturne-include_2.2.1-1~exp1_amd64.deb - optional science code-saturne_2.2.1-1~exp1.dsc - source science code-saturne_2.2.1-1~exp1_amd64.deb - optional science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Sun Jul 15 23:02:16 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 15 Jul 2012 23:02:16 +0000 Subject: code-saturne override disparity Message-ID: There are disparities between your recently accepted upload and the override file for the following file(s): code-saturne-doc_2.2.1-1~exp1_all.deb: package says section is doc, override says science. Please note that a list of new sections were recently added to the archive: cli-mono, database, debug, fonts, gnu-r, gnustep, haskell, httpd, java, kernel, lisp, localization, ocaml, php, ruby, vcs, video, xfce, zope. At this time a script was used to reclassify packages into these sections. If this is the case, please only reply to this email if the new section is inappropriate, otherwise please update your package at the next upload. Either the package or the override file is incorrect. If you think the override is correct and the package wrong please fix the package so that this disparity is fixed in the next upload. If you feel the override is incorrect then please file a bug against ftp.debian.org and explain why. Please INCLUDE the list of packages as seen above, or we won't be able to deal with your request due to missing information. Please make sure that the subject of the bug you file follows the following format: Subject: override: BINARY1:section/priority, [...], BINARYX:section/priority Include the justification for the change in the body of the mail please. [NB: this is an automatically generated mail; if you already filed a bug and have not received a response yet, please ignore this mail. Your bug needs to be processed by a human and will be in due course, but until then the installer will send these automated mails; sorry.] -- Debian distribution maintenance software (This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster at debian.org) From palazziandrea at yahoo.it Mon Jul 16 07:37:07 2012 From: palazziandrea at yahoo.it (Andrea Palazzi) Date: Mon, 16 Jul 2012 09:37:07 +0200 Subject: Bug#681750: code-aster-run (as_run) seems to need code-aster-gui (astk) Message-ID: <20120716073707.5626.44537.reportbug@atlante.lan> Package: code-aster-run Version: 1.8.4-4 Severity: serious Tags: upstream Justification: fails to build from source Hi, when trying to build binary packages from aster source package, I get this error: gv[0]; main() /usr/bin/as_run --make --vers=STA10.6 --destdir=/tmp/buildd/aster- 10.6.0-1/debian/tmp --config=/tmp/buildd/aster-10.6.0-1/debian/tmp//usr/lib/code aster/STA10.6/config-py2.6.txt Traceback (most recent call last): File "", line 1, in File "/usr/lib/python2.6/dist-packages/asrun/main.py", line 109, in main start() File "/usr/lib/python2.6/dist-packages/asrun/main.py", line 51, in start run = AsterRun() File "/usr/lib/python2.6/dist-packages/asrun/run.py", line 147, in __init__ self._init_rc() File "/usr/lib/python2.6/dist-packages/asrun/run.py", line 232, in _init_rc client.init_user_resource(osp.basename(ficrc)) File "/usr/lib/python2.6/dist-packages/asrun/client/config.py", line 100, in init_user_resource copyfile(self.rcfile(filename, osp.join(confdir, 'astkrc')), self.rcfile(filename)) File "/usr/lib/python2.6/shutil.py", line 50, in copyfile with open(src, 'rb') as fsrc: IOError: [Errno 2] No such file or directory: '/etc/codeaster/astkrc/prefs' make: *** [install] Error 1 dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2 E: Failed autobuilding of package It seems that as_run looks for config files of the code-aster-gui package; I don't see any reason for this, maybe it should be discussed with upstream... A (temporary) fix should be to make code-aster-run depending on code-aster-gui. Bye Andrea -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages code-aster-run depends on: ii debconf 1.5.42 ii python 2.7.2-10 ii python-numpy 1:1.5.1-4 ii python-support 1.0.14 code-aster-run recommends no packages. Versions of packages code-aster-run suggests: ii ddd 1:3.3.12-3 ii emacs 23.4+1-2 ii gdb 7.4really-1 -- Configuration Files: /etc/codeaster/asrun changed [not included] /etc/codeaster/aster changed [not included] -- no debconf information From palazziandrea at yahoo.it Mon Jul 16 08:10:26 2012 From: palazziandrea at yahoo.it (Andrea Palazzi) Date: Mon, 16 Jul 2012 09:10:26 +0100 (BST) Subject: Bug#681750: code-aster-run (as_run) seems to need code-aster-gui (astk) In-Reply-To: <20120716073707.5626.44537.reportbug@atlante.lan> References: <20120716073707.5626.44537.reportbug@atlante.lan> Message-ID: <1342426226.11047.YahooMailNeo@web132204.mail.ird.yahoo.com> Hi, just a couple of remarks: the packages that FTBFS are the one coming from the aster source package, and it fails with code-aster-run 1.10.4-3 and not 1.8.4-4 as stated above. Bye Andrea -------------- next part -------------- An HTML attachment was scrubbed... URL: From ladykaren001 at gmail.com Mon Jul 16 08:33:44 2012 From: ladykaren001 at gmail.com (LADY KAREN) Date: Mon, 16 Jul 2012 10:33:44 +0200 Subject: No subject Message-ID: <20120716083345.027D42505B0@medres.cmdik.pan.pl> -- Contact Us Today for a loan @ ladykaren001 at gmail.com Finances offered from $5,000 to $10,000,000 , The interest rate for loan is 3% CONTACT FOR MORE DETAILS E-mail: ladykaren001 at gmail.com Lady Karen ________________________________________________ Message sent using http://mail.cmdik.pan.pl From dr at jones.dk Mon Jul 16 08:58:31 2012 From: dr at jones.dk (Jonas Smedegaard) Date: Mon, 16 Jul 2012 10:58:31 +0200 Subject: Bug#681761: imview: Homepage is wrong Message-ID: <20120716085831.19111.59529.reportbug@auryn.jones.dk> Package: imview Version: Homepage is wrong Severity: minor Homepage is a page telling that it cannot find the requested info. - Jonas From sylvestre at debian.org Mon Jul 16 12:25:48 2012 From: sylvestre at debian.org (Sylvestre Ledru) Date: Mon, 16 Jul 2012 14:25:48 +0200 Subject: Bug#671965: libnetcdf-dev: netcdf.mod needs update for gfortran-4.7 Message-ID: <5004084C.9030207@debian.org> Hello, The release team won't revert the change from gcc 4.6 to 4.7. Could you therefor make a rebuild yourself ? It is blocking the resolution of bug #671965. Thanks Sylvestre From owner at bugs.debian.org Mon Jul 16 12:36:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 16 Jul 2012 12:36:06 +0000 Subject: Bug#661292: marked as done (mathgl: FTBFS: conditional expression between distinct pointer types 'gzFile' and 'FILE* {aka _IO_FILE*}' lacks a cast) References: <500408BA.8050901@debian.org> <20120225234755.GA9341@jwilk.net> Message-ID: Your message dated Mon, 16 Jul 2012 14:27:38 +0200 with message-id <500408BA.8050901 at debian.org> and subject line fixed has caused the Debian Bug report #661292, regarding mathgl: FTBFS: conditional expression between distinct pointer types 'gzFile' and 'FILE* {aka _IO_FILE*}' lacks a cast to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 661292: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661292 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Jakub Wilk Subject: mathgl: FTBFS: conditional expression between distinct pointer types 'gzFile' and 'FILE* {aka _IO_FILE*}' lacks a cast Date: Sun, 26 Feb 2012 00:47:55 +0100 Size: 4930 URL: -------------- next part -------------- An embedded message was scrubbed... From: Sylvestre Ledru Subject: fixed Date: Mon, 16 Jul 2012 14:27:38 +0200 Size: 1728 URL: From andreas at an3as.eu Mon Jul 16 12:22:59 2012 From: andreas at an3as.eu (Andreas Tille) Date: Mon, 16 Jul 2012 14:22:59 +0200 Subject: Bug#680484: gmap and scotch: error when trying to install together In-Reply-To: <1341589621.29703.18.camel@calcul8.lcmi.local> References: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> <1341589621.29703.18.camel@calcul8.lcmi.local> Message-ID: <20120716122259.GH4139@an3as.eu> On Fri, Jul 06, 2012 at 05:47:01PM +0200, trophime wrote: > I just upload a fix on Debian science git. I did debcheckout --user tille git://git.debian.org/debian-science/packages/scotch.git --git-track '*' but I can not see any fix you have mentioned. Are you sure you pushed your changes? Kind regards Andreas. -- http://fam-tille.de From noreply at release.debian.org Mon Jul 16 16:39:16 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 16 Jul 2012 16:39:16 +0000 Subject: imview 1.1.9c-9 MIGRATED to testing Message-ID: FYI: The status of the imview source package in Debian's testing distribution has changed. Previous version: (not in testing) Current version: 1.1.9c-9 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 16 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 16 Jul 2012 16:39:15 +0000 Subject: givaro REMOVED from testing Message-ID: FYI: The status of the givaro source package in Debian's testing distribution has changed. Previous version: 3.7.0-2 Current version: (not in testing) Hint: # 20120715; done 20120716 The script that generates this mail tries to extract removal reasons from comments in the britney hint files. Those comments were not originally meant to be machine readable, so if the reason for removing your package seems to be nonsense, it is probably the reporting script that got confused. Please check the actual hints file before you complain about meaningless removals. -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Mon Jul 16 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 16 Jul 2012 16:39:15 +0000 Subject: fflas-ffpack REMOVED from testing Message-ID: FYI: The status of the fflas-ffpack source package in Debian's testing distribution has changed. Previous version: 1.6.0-1 Current version: (not in testing) Hint: # 20120715; done 20120716 The script that generates this mail tries to extract removal reasons from comments in the britney hint files. Those comments were not originally meant to be machine readable, so if the reason for removing your package seems to be nonsense, it is probably the reporting script that got confused. Please check the actual hints file before you complain about meaningless removals. -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From web.officeweb.22 at att.net Mon Jul 16 16:49:14 2012 From: web.officeweb.22 at att.net (Chrysal Holdings/Assurance Group) Date: Mon, 16 Jul 2012 09:49:14 -0700 (PDT) Subject: No subject Message-ID: <1342457354.68083.YahooMailClassic@web184403.mail.bf1.yahoo.com> ARE YOU IN NEED OF A LOAN? IF YES CONTACT US FOR MORE INFORMATION -------------- next part -------------- An HTML attachment was scrubbed... URL: From gladky.anton at gmail.com Mon Jul 16 21:41:23 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Mon, 16 Jul 2012 21:41:23 +0000 Subject: [f6c935a] Fix for Bug#681761 committed to git Message-ID: tags 681761 + pending thanks Hello, The following change has been committed for this bug by Anton Gladky on Mon, 16 Jul 2012 23:41:18 +0200. The fix will be in the next upload. ==================================== Update homepage. (Closes: #681761) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=f6c935a From gladky.anton at gmail.com Mon Jul 16 21:41:23 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Mon, 16 Jul 2012 21:41:23 +0000 Subject: Bug#681761: [f6c935a] Fix for Bug#681761 committed to git Message-ID: tags 681761 + pending thanks Hello, The following change has been committed for this bug by Anton Gladky on Mon, 16 Jul 2012 23:41:18 +0200. The fix will be in the next upload. ==================================== Update homepage. (Closes: #681761) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=f6c935a From owner at bugs.debian.org Mon Jul 16 21:45:09 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 16 Jul 2012 21:45:09 +0000 Subject: Processed: [f6c935a] Fix for Bug#681761 committed to git References: Message-ID: Processing commands for control at bugs.debian.org: > tags 681761 + pending Bug #681761 [imview] imview: Homepage is wrong Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 681761: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681761 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ftpmaster at ftp-master.debian.org Tue Jul 17 09:05:55 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 09:05:55 +0000 Subject: Processing of scotch_5.1.12b.dfsg-2_amd64.changes Message-ID: scotch_5.1.12b.dfsg-2_amd64.changes uploaded successfully to localhost along with the files: scotch_5.1.12b.dfsg-2.dsc scotch_5.1.12b.dfsg-2.debian.tar.gz scotch_5.1.12b.dfsg-2_amd64.deb ptscotch_5.1.12b.dfsg-2_amd64.deb libscotch-dev_5.1.12b.dfsg-2_amd64.deb libptscotch-dev_5.1.12b.dfsg-2_amd64.deb scotch-dbg_5.1.12b.dfsg-2_amd64.deb ptscotch-dbg_5.1.12b.dfsg-2_amd64.deb libscotch-dbg_5.1.12b.dfsg-2_amd64.deb libptscotch-dbg_5.1.12b.dfsg-2_amd64.deb libscotchmetis-dev_5.1.12b.dfsg-2_amd64.deb libscotchparmetis-dev_5.1.12b.dfsg-2_amd64.deb libscotch-5.1_5.1.12b.dfsg-2_amd64.deb libptscotch-5.1_5.1.12b.dfsg-2_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 17 09:17:13 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 09:17:13 +0000 Subject: scotch_5.1.12b.dfsg-2_amd64.changes ACCEPTED into unstable Message-ID: Accepted: libptscotch-5.1_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libptscotch-5.1_5.1.12b.dfsg-2_amd64.deb libptscotch-dbg_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libptscotch-dbg_5.1.12b.dfsg-2_amd64.deb libptscotch-dev_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libptscotch-dev_5.1.12b.dfsg-2_amd64.deb libscotch-5.1_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libscotch-5.1_5.1.12b.dfsg-2_amd64.deb libscotch-dbg_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libscotch-dbg_5.1.12b.dfsg-2_amd64.deb libscotch-dev_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libscotch-dev_5.1.12b.dfsg-2_amd64.deb libscotchmetis-dev_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libscotchmetis-dev_5.1.12b.dfsg-2_amd64.deb libscotchparmetis-dev_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/libscotchparmetis-dev_5.1.12b.dfsg-2_amd64.deb ptscotch-dbg_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/ptscotch-dbg_5.1.12b.dfsg-2_amd64.deb ptscotch_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/ptscotch_5.1.12b.dfsg-2_amd64.deb scotch-dbg_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/scotch-dbg_5.1.12b.dfsg-2_amd64.deb scotch_5.1.12b.dfsg-2.debian.tar.gz to main/s/scotch/scotch_5.1.12b.dfsg-2.debian.tar.gz scotch_5.1.12b.dfsg-2.dsc to main/s/scotch/scotch_5.1.12b.dfsg-2.dsc scotch_5.1.12b.dfsg-2_amd64.deb to main/s/scotch/scotch_5.1.12b.dfsg-2_amd64.deb Changes: scotch (5.1.12b.dfsg-2) unstable; urgency=low . [ Christophe Trophime ] * Rename gmap to avoid clash with "gmap package" (Closes: #680484) * Update install for gmap name change * Correct scotch_gmpap names in [pt]scotch.install Try to supress lintian warnings * Fix install for scotch_gmap.1 manpage * Fix change from gmap to scotch_gmap . [ Andreas Tille ] * debian/control: - Add myself to uploaders - Standards-Version: 3.9.3 (no changes needed) * debian/Makefile*.inc: Enable propagation of hardening flags * debian/patches/format-security.patch: Fix format security issue Override entries for your package: libptscotch-5.1_5.1.12b.dfsg-2_amd64.deb - extra libs libptscotch-dbg_5.1.12b.dfsg-2_amd64.deb - extra debug libptscotch-dev_5.1.12b.dfsg-2_amd64.deb - extra libdevel libscotch-5.1_5.1.12b.dfsg-2_amd64.deb - extra libs libscotch-dbg_5.1.12b.dfsg-2_amd64.deb - extra debug libscotch-dev_5.1.12b.dfsg-2_amd64.deb - extra libdevel libscotchmetis-dev_5.1.12b.dfsg-2_amd64.deb - extra libdevel libscotchparmetis-dev_5.1.12b.dfsg-2_amd64.deb - extra libdevel ptscotch-dbg_5.1.12b.dfsg-2_amd64.deb - extra debug ptscotch_5.1.12b.dfsg-2_amd64.deb - extra math scotch-dbg_5.1.12b.dfsg-2_amd64.deb - extra debug scotch_5.1.12b.dfsg-2.dsc - source math scotch_5.1.12b.dfsg-2_amd64.deb - extra math Announcing to debian-devel-changes at lists.debian.org Closing bugs: 680484 Thank you for your contribution to Debian. From owner at bugs.debian.org Tue Jul 17 09:21:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 17 Jul 2012 09:21:06 +0000 Subject: Bug#680484: marked as done (gmap and scotch: error when trying to install together) References: <20120706091429.21139.96526.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: Your message dated Tue, 17 Jul 2012 09:17:13 +0000 with message-id and subject line Bug#680484: fixed in scotch 5.1.12b.dfsg-2 has caused the Debian Bug report #680484, regarding gmap and scotch: error when trying to install together to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 680484: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680484 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Andreas Beckmann Subject: gmap and scotch: error when trying to install together Date: Fri, 06 Jul 2012 11:14:29 +0200 Size: 11247 URL: -------------- next part -------------- An embedded message was scrubbed... From: Andreas Tille Subject: Bug#680484: fixed in scotch 5.1.12b.dfsg-2 Date: Tue, 17 Jul 2012 09:17:13 +0000 Size: 8804 URL: From williamsjomo222 at gmail.com Tue Jul 17 19:22:36 2012 From: williamsjomo222 at gmail.com (WILLIAMS JOMO (ESKOM)) Date: Tue, 17 Jul 2012 12:22:36 -0700 (PDT) Subject: INVESTMENT FUND TRANSFER (FROM WILLIAMS JOMO) KINDLY VIEW THE ATTACHED FILE AND READ MY BUSINESS PROPOSAL AND GET TO ME FOR MORE DETAILS Message-ID: <1342552956.1204.YahooMailRC@web182203.mail.bf1.yahoo.com> Please view the attached file and get back to me -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Eskom Holdings limited.doc Type: application/msword Size: 27136 bytes Desc: not available URL: From ftpmaster at ftp-master.debian.org Tue Jul 17 20:42:49 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 20:42:49 +0000 Subject: Processing of givaro_3.7.1-1_amd64.changes Message-ID: givaro_3.7.1-1_amd64.changes uploaded successfully to localhost along with the files: givaro_3.7.1-1.dsc givaro_3.7.1.orig.tar.gz givaro_3.7.1-1.debian.tar.gz libgivaro-dev_3.7.1-1_amd64.deb libgivaro1_3.7.1-1_amd64.deb libgivaro-doc_3.7.1-1_all.deb givaro-user-doc_3.7.1-1_all.deb givaro-dev-doc_3.7.1-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 17 21:02:42 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:02:42 +0000 Subject: givaro_3.7.1-1_amd64.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From ftpmaster at ftp-master.debian.org Tue Jul 17 21:17:54 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:17:54 +0000 Subject: gmsh_2.6.0.dfsg-3_amd64.changes ACCEPTED into unstable Message-ID: Accepted: gmsh-doc_2.6.0.dfsg-3_all.deb to main/g/gmsh/gmsh-doc_2.6.0.dfsg-3_all.deb gmsh_2.6.0.dfsg-3.debian.tar.gz to main/g/gmsh/gmsh_2.6.0.dfsg-3.debian.tar.gz gmsh_2.6.0.dfsg-3.dsc to main/g/gmsh/gmsh_2.6.0.dfsg-3.dsc gmsh_2.6.0.dfsg-3_amd64.deb to main/g/gmsh/gmsh_2.6.0.dfsg-3_amd64.deb libgmsh-dev_2.6.0.dfsg-3_all.deb to main/g/gmsh/libgmsh-dev_2.6.0.dfsg-3_all.deb libgmsh2_2.6.0.dfsg-3_amd64.deb to main/g/gmsh/libgmsh2_2.6.0.dfsg-3_amd64.deb libjava-gmsh2_2.6.0.dfsg-3_amd64.deb to main/g/gmsh/libjava-gmsh2_2.6.0.dfsg-3_amd64.deb python-gmsh_2.6.0.dfsg-3_amd64.deb to main/g/gmsh/python-gmsh_2.6.0.dfsg-3_amd64.deb Changes: gmsh (2.6.0.dfsg-3) unstable; urgency=low . [ Anton Gladky ] * [3bf9207] Split gmsh into gmsh, libgmsh2, gmsh-doc and gmsh-dev. (Closes: #678319) . [ Christophe Trophime ] * [7eb2740] Add separate packages for python and java wrappers * [7d7eb90] Add upstream file Override entries for your package: gmsh-doc_2.6.0.dfsg-3_all.deb - optional doc gmsh_2.6.0.dfsg-3.dsc - source math gmsh_2.6.0.dfsg-3_amd64.deb - optional math libgmsh-dev_2.6.0.dfsg-3_all.deb - optional libdevel libgmsh2_2.6.0.dfsg-3_amd64.deb - optional math libjava-gmsh2_2.6.0.dfsg-3_amd64.deb - optional java python-gmsh_2.6.0.dfsg-3_amd64.deb - optional python Announcing to debian-devel-changes at lists.debian.org Closing bugs: 678319 Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 17 21:20:39 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:20:39 +0000 Subject: salome-geom_6.5.0-1_multi.changes ACCEPTED into experimental Message-ID: Accepted: salome-geom-dev_6.5.0-1_amd64.deb to main/s/salome-geom/salome-geom-dev_6.5.0-1_amd64.deb salome-geom-doc_6.5.0-1_all.deb to main/s/salome-geom/salome-geom-doc_6.5.0-1_all.deb salome-geom_6.5.0-1.diff.gz to main/s/salome-geom/salome-geom_6.5.0-1.diff.gz salome-geom_6.5.0-1.dsc to main/s/salome-geom/salome-geom_6.5.0-1.dsc salome-geom_6.5.0-1_amd64.deb to main/s/salome-geom/salome-geom_6.5.0-1_amd64.deb salome-geom_6.5.0.orig.tar.gz to main/s/salome-geom/salome-geom_6.5.0.orig.tar.gz Changes: salome-geom (6.5.0-1) experimental; urgency=low . * New upstream release Override entries for your package: salome-geom-dev_6.5.0-1_amd64.deb - extra devel salome-geom-doc_6.5.0-1_all.deb - extra doc salome-geom_6.5.0-1.dsc - extra science salome-geom_6.5.0-1_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 17 21:20:47 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:20:47 +0000 Subject: salome-geom_6.5.0-2_multi.changes ACCEPTED into experimental Message-ID: Accepted: salome-geom-dev_6.5.0-2_amd64.deb to main/s/salome-geom/salome-geom-dev_6.5.0-2_amd64.deb salome-geom-doc_6.5.0-2_all.deb to main/s/salome-geom/salome-geom-doc_6.5.0-2_all.deb salome-geom_6.5.0-2.diff.gz to main/s/salome-geom/salome-geom_6.5.0-2.diff.gz salome-geom_6.5.0-2.dsc to main/s/salome-geom/salome-geom_6.5.0-2.dsc salome-geom_6.5.0-2_amd64.deb to main/s/salome-geom/salome-geom_6.5.0-2_amd64.deb Changes: salome-geom (6.5.0-2) experimental; urgency=low . * Don't install /usr/lib/salome/bin/VERSION. Override entries for your package: salome-geom-dev_6.5.0-2_amd64.deb - extra devel salome-geom-doc_6.5.0-2_all.deb - extra doc salome-geom_6.5.0-2.dsc - extra science salome-geom_6.5.0-2_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From owner at bugs.debian.org Tue Jul 17 21:21:17 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 17 Jul 2012 21:21:17 +0000 Subject: Bug#678319: marked as done (gmsh: broken shared library packaging) References: <20120620203738.GA20952@radis.cristau.org> Message-ID: Your message dated Tue, 17 Jul 2012 21:17:54 +0000 with message-id and subject line Bug#678319: fixed in gmsh 2.6.0.dfsg-3 has caused the Debian Bug report #678319, regarding gmsh: broken shared library packaging to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 678319: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678319 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Julien Cristau Subject: gmsh: broken shared library packaging Date: Wed, 20 Jun 2012 22:37:38 +0200 Size: 3338 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Bug#678319: fixed in gmsh 2.6.0.dfsg-3 Date: Tue, 17 Jul 2012 21:17:54 +0000 Size: 5961 URL: From ftpmaster at ftp-master.debian.org Tue Jul 17 21:32:13 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:32:13 +0000 Subject: salome-med_6.5.0-1_multi.changes ACCEPTED into experimental Message-ID: Accepted: salome-med-dev_6.5.0-1_amd64.deb to main/s/salome-med/salome-med-dev_6.5.0-1_amd64.deb salome-med-doc_6.5.0-1_all.deb to main/s/salome-med/salome-med-doc_6.5.0-1_all.deb salome-med_6.5.0-1.diff.gz to main/s/salome-med/salome-med_6.5.0-1.diff.gz salome-med_6.5.0-1.dsc to main/s/salome-med/salome-med_6.5.0-1.dsc salome-med_6.5.0-1_amd64.deb to main/s/salome-med/salome-med_6.5.0-1_amd64.deb salome-med_6.5.0.orig.tar.gz to main/s/salome-med/salome-med_6.5.0.orig.tar.gz Changes: salome-med (6.5.0-1) experimental; urgency=low . * New upstream release. * Split salome source package into smaller modules. Override entries for your package: salome-med-dev_6.5.0-1_amd64.deb - extra devel salome-med-doc_6.5.0-1_all.deb - extra doc salome-med_6.5.0-1.dsc - extra science salome-med_6.5.0-1_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 17 21:32:26 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:32:26 +0000 Subject: salome-med_6.5.0-2_multi.changes ACCEPTED into experimental Message-ID: Accepted: salome-med-dev_6.5.0-2_amd64.deb to main/s/salome-med/salome-med-dev_6.5.0-2_amd64.deb salome-med-doc_6.5.0-2_all.deb to main/s/salome-med/salome-med-doc_6.5.0-2_all.deb salome-med_6.5.0-2.diff.gz to main/s/salome-med/salome-med_6.5.0-2.diff.gz salome-med_6.5.0-2.dsc to main/s/salome-med/salome-med_6.5.0-2.dsc salome-med_6.5.0-2_amd64.deb to main/s/salome-med/salome-med_6.5.0-2_amd64.deb Changes: salome-med (6.5.0-2) experimental; urgency=low . * Fix up idl file path in check_Med.m4. Override entries for your package: salome-med-dev_6.5.0-2_amd64.deb - extra devel salome-med-doc_6.5.0-2_all.deb - extra doc salome-med_6.5.0-2.dsc - extra science salome-med_6.5.0-2_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 17 21:32:34 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:32:34 +0000 Subject: salome-paravis_6.5.0-1_multi.changes ACCEPTED into experimental Message-ID: Accepted: paraview-medreader_6.5.0-1_amd64.deb to main/s/salome-paravis/paraview-medreader_6.5.0-1_amd64.deb salome-paravis-dev_6.5.0-1_amd64.deb to main/s/salome-paravis/salome-paravis-dev_6.5.0-1_amd64.deb salome-paravis_6.5.0-1.diff.gz to main/s/salome-paravis/salome-paravis_6.5.0-1.diff.gz salome-paravis_6.5.0-1.dsc to main/s/salome-paravis/salome-paravis_6.5.0-1.dsc salome-paravis_6.5.0-1_amd64.deb to main/s/salome-paravis/salome-paravis_6.5.0-1_amd64.deb salome-paravis_6.5.0.orig.tar.gz to main/s/salome-paravis/salome-paravis_6.5.0.orig.tar.gz Changes: salome-paravis (6.5.0-1) experimental; urgency=low . * Initial release. Override entries for your package: paraview-medreader_6.5.0-1_amd64.deb - extra science salome-paravis-dev_6.5.0-1_amd64.deb - extra science salome-paravis_6.5.0-1.dsc - extra science salome-paravis_6.5.0-1_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 17 21:32:44 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 17 Jul 2012 21:32:44 +0000 Subject: salome-smesh_6.5.0-1_multi.changes ACCEPTED into experimental Message-ID: Accepted: salome-smesh-dev_6.5.0-1_amd64.deb to main/s/salome-smesh/salome-smesh-dev_6.5.0-1_amd64.deb salome-smesh-doc_6.5.0-1_all.deb to main/s/salome-smesh/salome-smesh-doc_6.5.0-1_all.deb salome-smesh_6.5.0-1.diff.gz to main/s/salome-smesh/salome-smesh_6.5.0-1.diff.gz salome-smesh_6.5.0-1.dsc to main/s/salome-smesh/salome-smesh_6.5.0-1.dsc salome-smesh_6.5.0-1_amd64.deb to main/s/salome-smesh/salome-smesh_6.5.0-1_amd64.deb salome-smesh_6.5.0.orig.tar.gz to main/s/salome-smesh/salome-smesh_6.5.0.orig.tar.gz Changes: salome-smesh (6.5.0-1) experimental; urgency=low . * Initial release. Override entries for your package: salome-smesh-dev_6.5.0-1_amd64.deb - extra devel salome-smesh-doc_6.5.0-1_all.deb - extra doc salome-smesh_6.5.0-1.dsc - extra science salome-smesh_6.5.0-1_amd64.deb - extra science Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From sophia.dede910 at gmail.com Tue Jul 17 23:12:22 2012 From: sophia.dede910 at gmail.com (sophia dede) Date: Wed, 18 Jul 2012 01:12:22 +0200 (CEST) Subject: Beloveth Message-ID: <41.207.163.1.1342566742.wm@webmail.inode.at> Dear Beloveth. I Mrs.Sophia Dede, I was born 20th of January,1947. Please accept my apologies for any inconvenience. I am sufferring from lung cancer for eight months ago, I experience a lot of pain, which can lead to death. My doctor just told me that my days are numbered, and my health is deteriorating. My family situation is such that I was a widow with no children, with whom I could leave my legacy. That's why I want the grace and help the poor, I leave my legacy, which is the cost ($ 950,000 USD), so you can use to help the poor, the homeless, the poor and orphans. I would like to send the following information: (1).Your full Name,(2).your exact adres,(3). Your phone number if possible, a fax number. And finally I will send all necessary documents relating to funds in the bank, all I want is your good will. I look forward to your good will, and especially the proper use of these funds. Thank you can contact me as soon as possible if I am between life and death.My private address for more information: (sophia.dede910 at gmail.com) May God bless you.Yours sincerely Mrs.Sophia Dede. From sylvestre at debian.org Wed Jul 18 06:45:27 2012 From: sylvestre at debian.org (Sylvestre Ledru) Date: Wed, 18 Jul 2012 08:45:27 +0200 Subject: Bug#681188: scilab: Issue with locales values and import/export text files In-Reply-To: <20120711105937.1539a5ec@Suzanne.Arsene> References: <20120711105937.1539a5ec@Suzanne.Arsene> Message-ID: <50065B87.2010502@debian.org> forwarded 681188 http://bugzilla.scilab.org/show_bug.cgi?id=11505 thanks On 11/07/2012 10:59, Eloi COUTANT wrote: > Hi, > > > The problem is with the functions "fscanfMat" and "fprintfMat", which > are supposed to import or export a matrix of floatting numbers. In > Scilab, the decimal separator is the point ( . ) ; but with > LC_ALL='fr_FR.UTF-8', the decimal separators in exported and imported > text files becomes a comma (,), when Scilab's "internal" decimal > separators is still the point... Right. Thanks. Sylvestre From owner at bugs.debian.org Wed Jul 18 06:57:08 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 18 Jul 2012 06:57:08 +0000 Subject: Processed: Re: Bug#681188: scilab: Issue with locales values and import/export text files References: <50065B87.2010502@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > forwarded 681188 http://bugzilla.scilab.org/show_bug.cgi?id=11505 Bug #681188 [scilab] scilab: Issue with locales values and import/export text files Set Bug forwarded-to-address to 'http://bugzilla.scilab.org/show_bug.cgi?id=11505'. > thanks Stopping processing here. Please contact me if you need assistance. -- 681188: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681188 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Wed Jul 18 08:06:05 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 18 Jul 2012 08:06:05 +0000 Subject: Processed: tagging as pending bugs that are closed by packages in NEW References: <20120718080327.87E798E917F6@elida.v7w.com> Message-ID: Processing commands for control at bugs.debian.org: > # Wednesday 18 July 08:03:18 UTC 2012 > # Tagging as pending bugs that are closed by packages in NEW > # http://ftp-master.debian.org/new.html > # > # Source package in NEW: givaro > tags 681589 + pending Bug #681589 [src:givaro] givaro: uses system include syntax for local header Added tag(s) pending. > # Source package in NEW: givaro > tags 678769 + pending Bug #678769 [src:givaro] givaro: changed API without SONAME bump Added tag(s) pending. > # Source package in NEW: librg-exception-perl > tags 681098 + pending Bug #681098 [wnpp] ITP: librg-exception-perl -- RG::Exception perl module Added tag(s) pending. > # Source package in NEW: travis > tags 681919 + pending Bug #681919 [wnpp] ITP: travis -- trajectory analyzer and visualizer Added tag(s) pending. > End of message, stopping processing here. Please contact me if you need assistance. -- 678769: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678769 681098: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681098 681589: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681589 681919: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681919 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From andreas at an3as.eu Wed Jul 18 11:30:02 2012 From: andreas at an3as.eu (Andreas Tille) Date: Wed, 18 Jul 2012 13:30:02 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: References: Message-ID: <20120718113002.GC10311@an3as.eu> Hi Daniele, On Wed, Jul 18, 2012 at 08:55:09AM +0000, Daniele E. Domenichelli wrote: > The following commit has been merged in the master branch: > commit 7d0c9179db9f8381460d458d30d7cdbca94e9b57 > Author: Daniele E. Domenichelli > Date: Wed Jul 18 10:26:10 2012 +0200 > > Release GtkDataboxMM 0.9.2 > > diff --git a/NEWS b/NEWS > index 65dde7a..9102239 100644 > --- a/NEWS > +++ b/NEWS > @@ -1,3 +1,9 @@ > +GtkDataboxMM (2012-07-18) 0.9.2 > +=============================== > + > + * Fix build on windows > + * Ruler is now a Gtk::Object This somehow looks like a manual injection of random upstream files. Did you read the pristine-tar part of Debian Science packaging policy? Kind regards Andreas. -- http://fam-tille.de From daniele.domenichelli at gmail.com Wed Jul 18 12:55:25 2012 From: daniele.domenichelli at gmail.com (Daniele E. Domenichelli) Date: Wed, 18 Jul 2012 14:55:25 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <20120718113002.GC10311@an3as.eu> References: <20120718113002.GC10311@an3as.eu> Message-ID: <5006B23D.6090309@gmail.com> Hello Andreas, On 18/07/12 13:30, Andreas Tille wrote: > This somehow looks like a manual injection of random upstream files. > Did you read the pristine-tar part of Debian Science packaging policy? I read it, and I apologize if I'm doing something wrong... Perhaps you missed my last emails on debian-mentors mailing lists, so I'll ask you here again: In the gtkdataboxmm repository there are now 4 branches: - master (upstream master) - upstream (upstream source from tarball) - debian (debian folder) - pristine-tar HEAD points to the debian branch, so that is the one that is checked out when the repository is cloned. Is this ok, or should I remove the master branch, and rename the debian branch to master? Cheers, Daniele From ftpmaster at ftp-master.debian.org Wed Jul 18 12:57:58 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 18 Jul 2012 12:57:58 +0000 Subject: Bug#681949: Removed package(s) from unstable Message-ID: We believe that the bug you reported is now fixed; the following package(s) have been removed from unstable: libconqat-simulink-java | 2.7.dfsg-1 | source, all libconqat-simulink-java-doc | 2.7.dfsg-1 | all ------------------- Reason ------------------- ROM; Very low popcon, no interest from the maintainer ---------------------------------------------- Note that the package(s) have simply been removed from the tag database and may (or may not) still be in the pool; this is not a bug. The package(s) will be physically removed automatically when no suite references them (and in the case of source, when no binary references it). Please also remember that the changes have been done on the master archive and will not propagate to any mirrors (ftp.debian.org included) until the next dinstall run at the earliest. Packages are usually not removed from testing by hand. Testing tracks unstable and will automatically remove packages which were removed from unstable when removing them from testing causes no dependency problems. The release team can force a removal from testing if it is really needed, please contact them if this should be the case. We try to close Bugs which have been reported against this package automatically. But please check all old bugs, if they where closed correctly or should have been re-assign to another package. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 681949 at bugs.debian.org. The full log for this bug can be viewed at http://bugs.debian.org/681949 This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster at debian.org. Debian distribution maintenance software pp. Alexander Reichle-Schmehl (the ftpmaster behind the curtain) From andreas at an3as.eu Wed Jul 18 13:03:19 2012 From: andreas at an3as.eu (Andreas Tille) Date: Wed, 18 Jul 2012 15:03:19 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <5006B23D.6090309@gmail.com> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> Message-ID: <20120718130319.GB12615@an3as.eu> Hi Daniele, On Wed, Jul 18, 2012 at 02:55:25PM +0200, Daniele E. Domenichelli wrote: > > Perhaps you missed my last emails on debian-mentors mailing lists, > so I'll ask you here again: I did not missed it - I just don't know a reasonable answer because I'm not perfectly comfortable with Git. > In the gtkdataboxmm repository there are now 4 branches: > > - master (upstream master) > - upstream (upstream source from tarball) > - debian (debian folder) > - pristine-tar > > HEAD points to the debian branch, so that is the one that is checked > out when the repository is cloned. > > Is this ok, or should I remove the master branch, and rename the > debian branch to master? Hmmmm, good question - I don't know. If I were you I would probably try to start from scratch (perhaps with a "lib" in the beginning so the name of the repository should perhaps rather be libgtkdataboxmm). Than simply follow the advise in Debian Science policy how to use pristine-tar. This worked (even) for me (even if I have pretty good skills to break something all the time). Hope this helps Andreas. -- http://fam-tille.de From daniele.domenichelli at gmail.com Wed Jul 18 13:51:10 2012 From: daniele.domenichelli at gmail.com (Daniele E. Domenichelli) Date: Wed, 18 Jul 2012 15:51:10 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <20120718130319.GB12615@an3as.eu> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> Message-ID: <5006BF4E.2010509@gmail.com> On 18/07/12 15:03, Andreas Tille wrote: > Hmmmm, good question - I don't know. If I were you I would probably try > to start from scratch (perhaps with a "lib" in the beginning so the name > of the repository should perhaps rather be libgtkdataboxmm). > > Than simply follow the advise in Debian Science policy how to use > pristine-tar. This worked (even) for me (even if I have pretty good > skills to break something all the time). Having another look at the policies, I found this: "[...] The next step only applies if you do not use the "master" branch for storing you debian work. In this case, the HEAD reference in the repository has to be set to point to the branch you are going to push to the repository, or cloning will fail. Assuming your Debian-specific changes are stored in a branch called "debian", do: $ echo 'ref: refs/heads/debian' > HEAD [...]" So I assume that it isn't a problem if the debian specific changes are stored in the debian branch... I think this makes a lot easier for me to maintain at the same time the upstream and the debian branches. The debian, upstream and pristine-tar branches were created following the Debian Science policy, so I think that the only problem is if the master branch should be there or not. Anyway I just deleted it ;) Also the other issue is if the package name (and the repository name) should be gtkdataboxmm or libgtkdataboxmm. What do you think? Cheers, Daniele From edd at debian.org Wed Jul 18 14:22:21 2012 From: edd at debian.org (Dirk Eddelbuettel) Date: Wed, 18 Jul 2012 09:22:21 -0500 Subject: libalglib (aka alglib) in Debian Message-ID: <20486.50845.214982.887499@max.nulle.part> Hi all, A user of my Rcpp package mentioned Alglib the other day, so I looked at it (cf http://www.alglib.net). Seems promising and somewhat complete. Now, we do of course have it, thanks to six Debian releases of the same source package 2.6.0. That said, as one gathers from looking at the announcement log at Alglib: http://www.alglib.net/arcnews.php that version was already outdated when Scott initially packaged it. Upstream is now at 3.6.0 whereas we are still at 2.6.0. Do we care? Is anybody using this? Dirk -- Dirk Eddelbuettel | edd at debian.org | http://dirk.eddelbuettel.com From andreas at an3as.eu Wed Jul 18 14:31:12 2012 From: andreas at an3as.eu (Andreas Tille) Date: Wed, 18 Jul 2012 16:31:12 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <5006BF4E.2010509@gmail.com> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> Message-ID: <20120718143112.GA15392@an3as.eu> On Wed, Jul 18, 2012 at 03:51:10PM +0200, Daniele E. Domenichelli wrote: > Having another look at the policies, I found this: > > "[...] > > The next step only applies if you do not use the "master" branch for > storing you debian work. In this case, the HEAD reference in the > repository has to be set to point to the branch you are going to > push to the repository, or cloning will fail. Assuming your > Debian-specific changes are stored in a branch called "debian", do: > > $ echo 'ref: refs/heads/debian' > HEAD > > [...]" > > > So I assume that it isn't a problem if the debian specific changes > are stored in the debian branch... I think this makes a lot easier > for me to maintain at the same time the upstream and the debian > branches. OK, fine for me if git-buildpackage does its job flawlessly. However, did you do a git push --all ? I obtained a fresh clone and get $ git branch * debian > Also the other issue is if the package name (and the repository > name) should be gtkdataboxmm or libgtkdataboxmm. What do you think? I do not know if it is ironed out somewhere in policy but my gut feeling somehow says a library package should feature a lib in the beginning of the source name and thus also the repository name. That was my motivation to choose libgtkdatabox for the C version. I do not insist on this naming scheme - but you asked what I think. Kind regards Andreas. -- http://fam-tille.de From reznicek at ipnp.troja.mff.cuni.cz Wed Jul 18 15:37:42 2012 From: reznicek at ipnp.troja.mff.cuni.cz (Pavel Reznicek) Date: Wed, 18 Jul 2012 17:37:42 +0200 Subject: Bug#681999: libpythia8: Missing library.so.XXX suffix Message-ID: <20120718153742.15364.68809.reportbug@ipnp-n22a.troja.mff.cuni.cz> Package: libpythia8 Version: 8.1.65-1 Severity: minor Tags: patch Dear Maintainer, firstly, thanks for packaging the librayr. There seem to be missing the up-version suffix in the libpythia.so.*8.1.65* files. To fix it, it is enough to just replace: UPVER=$(shell echo $(DEBVER) | \ line in the debian/rules by: export UPVER=$(shell echo $(DEBVER) | \ (I am not sure if it is not agains some packagking rules, but it works). Best regards, Pavel -- System Information: LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:core-4.1-amd64:core-4.1-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:cxx-4.1-amd64:cxx-4.1-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:desktop-4.1-amd64:desktop-4.1-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:graphics-4.1-amd64:graphics-4.1-noarch:languages-3.2-amd64:languages-3.2-noarch:languages-4.0-amd64:languages-4.0-noarch:languages-4.1-amd64:languages-4.1-noarch:multimedia-3.2-amd64:multimedia-3.2-noarch:multimedia-4.0-amd64:multimedia-4.0-noarch:multimedia-4.1-amd64:multimedia-4.1-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:printing-4.1-amd64:printing-4.1-noarch:qt4-3.1-amd64:qt4-3.1-noarch:security-4.0-amd64:security-4.0-noarch:security-4.1-amd64:security-4.1-noarch Distributor ID: Ubuntu Description: Ubuntu 10.04 Release: 10.04 Codename: lucid Architecture: amd64 (x86_64) Kernel: Linux 3.4.5-trunk-amd64-ipnp-n22a-2 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libpythia8 depends on: ii libc6 2.13-33 ii libgcc1 1:4.7.1-2 ii liblhapdf0 5.8.8-1 ii libstdc++6 4.7.1-2 ii multiarch-support 2.13-33 ii pythia8-data 8.1.65-1 Versions of packages libpythia8 recommends: ii libpythia8-dev 8.1.65-1 libpythia8 suggests no packages. -- no debconf information From reznicek at ipnp.troja.mff.cuni.cz Wed Jul 18 16:04:36 2012 From: reznicek at ipnp.troja.mff.cuni.cz (Pavel Reznicek) Date: Wed, 18 Jul 2012 18:04:36 +0200 Subject: Bug#682004: pythia8-root-interface: Remove hard dependence on root-system and libroot-core-dev, add rootmap file Message-ID: <20120718160436.30049.82280.reportbug@ipnp-n22a.troja.mff.cuni.cz> Package: pythia8-root-interface Version: 8.1.65-1 Severity: wishlist Dear Maintainer, would it be possible to replace the dependence of this package on root-system and libroot-core-dev just by recommendation ? The package is pure code only and thus it will also work with other (e.g. locally self-compiled) ways of ROOT installations. Also, it might be usefull to include a /usr/lib/libpythia8.rootmap file to allow automatic library loading in the interactive ROOT sessions. The content of the roomap file should be these two lines: Library.Pythia8: /usr/lib/$(DEB_HOST_MULTIARCH)/libpythia8.so /usr/lib/$(DEB_HOST_MULTIARCH)/libLHAPDF.so /usr/lib/$(DEB_HOST_MULTIARCH)/libhepmcinterface.so Library.Pythia: /usr/lib/$(DEB_HOST_MULTIARCH)/libpythia8.so /usr/lib/$(DEB_HOST_MULTIARCH)/libLHAPDF.so /usr/lib/$(DEB_HOST_MULTIARCH)/libhepmcinterface.so (DEB_HOST_MULTIARCH replaced by x86_64-linux-gnu etc.). Thanks, Pavel -- System Information: LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:core-4.1-amd64:core-4.1-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:cxx-4.1-amd64:cxx-4.1-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:desktop-4.1-amd64:desktop-4.1-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:graphics-4.1-amd64:graphics-4.1-noarch:languages-3.2-amd64:languages-3.2-noarch:languages-4.0-amd64:languages-4.0-noarch:languages-4.1-amd64:languages-4.1-noarch:multimedia-3.2-amd64:multimedia-3.2-noarch:multimedia-4.0-amd64:multimedia-4.0-noarch:multimedia-4.1-amd64:multimedia-4.1-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:printing-4.1-amd64:printing-4.1-noarch:qt4-3.1-amd64:qt4-3.1-noarch:security-4.0-amd64:security-4.0-noarch:security-4.1-amd64:security-4.1-noarch Distributor ID: Ubuntu Description: Ubuntu 10.04 Release: 10.04 Codename: lucid Architecture: amd64 (x86_64) Kernel: Linux 3.4.5-trunk-amd64-ipnp-n22a-2 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash From showard314 at gmail.com Wed Jul 18 18:21:15 2012 From: showard314 at gmail.com (Scott Howard) Date: Wed, 18 Jul 2012 18:21:15 -0000 Subject: Bug#681535: [qtiplot] qtiplot crahes on startup with siplib error message Message-ID: <20120320074730.11548.19152.reportbug@debian-testing.hsd1.in.comcast.net> Package: qtiplot Version: 0.9.8.8-5+b1 Followup-For: Bug #681535 I've been unable to reproduce the crash on i386. It seems we have the same python-sip version. I can also get older versions of qtiplot plot to work with the old python-sip as well. Have you tried this on a non-AMD64 machine? Perhaps that's the problem (I don't have any to test at the momemt) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.1.0-1-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages qtiplot depends on: ii libalglib-2.6.0 2.6.0-6 ii libc6 2.13-34 ii libgcc1 1:4.6.2-12 ii libgl1-mesa-glx [libgl1] 7.11.2-1 ii libgl2ps0 1.3.6-1 ii libglu1-mesa [libglu1] 8.0.3-1 ii libgsl0ldbl 1.15+dfsg-1 ii libmuparser2 2.1.0-3 ii liborigin2-1 2:20110117-1+b1 ii libpng12-0 1.2.49-2 ii libpython2.7 2.7.3-2 ii libqt4-network 4:4.7.4-2 ii libqt4-opengl 4:4.7.4-2 ii libqt4-qt3support 4:4.7.4-2 ii libqt4-svg 4:4.7.4-2 ii libqt4-xml 4:4.7.4-2 ii libqtassistantclient4 4.6.3-3 ii libqtcore4 4:4.7.4-2 ii libqtexengine1 0.3-3 ii libqtgui4 4:4.7.4-2 ii libstdc++6 4.6.2-12 ii libtamuanova-0.2 0.2-2 ii python 2.7.3-1 ii python-qt4 4.9.1-1 ii python-sip 4.13.3-2 ii zlib1g 1:1.2.7.dfsg-13 Versions of packages qtiplot recommends: ii qt-assistant-compat 4.6.3-3 ii qtiplot-doc 0.9.8.8-5 qtiplot suggests no packages. -- no debconf information From owner at bugs.debian.org Wed Jul 18 18:27:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 18 Jul 2012 18:27:07 +0000 Subject: Processed: unreproducible tag for 681535 References: Message-ID: Processing commands for control at bugs.debian.org: > tags 681535 unreproducible Bug #681535 [qtiplot] [qtiplot] qtiplot crahes on startup with siplib error message Added tag(s) unreproducible. > thanks Stopping processing here. Please contact me if you need assistance. -- 681535: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681535 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ftpmaster at ftp-master.debian.org Wed Jul 18 19:20:05 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 18 Jul 2012 19:20:05 +0000 Subject: Processing of sumo_0.15.0~dfsg-3_amd64.changes Message-ID: sumo_0.15.0~dfsg-3_amd64.changes uploaded successfully to localhost along with the files: sumo_0.15.0~dfsg-3.dsc sumo_0.15.0~dfsg-3.debian.tar.gz sumo_0.15.0~dfsg-3_amd64.deb sumo-tools_0.15.0~dfsg-3_all.deb sumo-doc_0.15.0~dfsg-3_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 18 19:32:53 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 18 Jul 2012 19:32:53 +0000 Subject: sumo_0.15.0~dfsg-3_amd64.changes ACCEPTED into unstable Message-ID: Accepted: sumo-doc_0.15.0~dfsg-3_all.deb to main/s/sumo/sumo-doc_0.15.0~dfsg-3_all.deb sumo-tools_0.15.0~dfsg-3_all.deb to main/s/sumo/sumo-tools_0.15.0~dfsg-3_all.deb sumo_0.15.0~dfsg-3.debian.tar.gz to main/s/sumo/sumo_0.15.0~dfsg-3.debian.tar.gz sumo_0.15.0~dfsg-3.dsc to main/s/sumo/sumo_0.15.0~dfsg-3.dsc sumo_0.15.0~dfsg-3_amd64.deb to main/s/sumo/sumo_0.15.0~dfsg-3_amd64.deb Changes: sumo (0.15.0~dfsg-3) unstable; urgency=low . * [6ae8190] Use compat level 9. Apply hardening of buildflags. * [daa56b5] Remove from compilation embedded copy of gl2ps, use packaged version instead. * [8c08de0] Add upstream file Override entries for your package: sumo-doc_0.15.0~dfsg-3_all.deb - optional doc sumo-tools_0.15.0~dfsg-3_all.deb - optional doc sumo_0.15.0~dfsg-3.dsc - source science sumo_0.15.0~dfsg-3_amd64.deb - optional science Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From daniele.domenichelli at gmail.com Wed Jul 18 20:32:24 2012 From: daniele.domenichelli at gmail.com (Daniele E. Domenichelli) Date: Wed, 18 Jul 2012 22:32:24 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <20120718143112.GA15392@an3as.eu> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> <20120718143112.GA15392@an3as.eu> Message-ID: <50071D58.5010806@gmail.com> On 18/07/12 16:31, Andreas Tille wrote: > OK, fine for me if git-buildpackage does its job flawlessly. > However, did you do a > > git push --all > > ? I obtained a fresh clone and get > > $ git branch > * debian Yes, branches should be there, try "git branch -a" to check remote branches. This is what I get from a fresh clone: $ git branch -a * debian remotes/origin/HEAD -> origin/debian remotes/origin/debian remotes/origin/pristine-tar remotes/origin/upstream >> Also the other issue is if the package name (and the repository >> name) should be gtkdataboxmm or libgtkdataboxmm. What do you think? > > I do not know if it is ironed out somewhere in policy but my gut feeling > somehow says a library package should feature a lib in the beginning of > the source name and thus also the repository name. That was my > motivation to choose libgtkdatabox for the C version. I do not insist > on this naming scheme - but you asked what I think. I made some research, but I cannot find any policy about the source name. I searched in debian repositories for gtk/gtkmm libraries and I found these packages: gtksourceview2 - libgtksourceviewmm gtkglext- gtkglextmm pango1.0 - pangomm goocanvas - goocanvasmm plotmm flowcanvas So, I don't think there is a real policy about that, most of them don't have lib. Anyway I don't care much about the name of the source package, so if you want to keep some coherence between the package names and you prefer the libxxx version, I can rename it... Regards, Daniele From lifongsun at gmail.com Thu Jul 19 01:12:36 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Thu, 19 Jul 2012 09:12:36 +0800 Subject: Bug#681999: libpythia8: Missing library.so.XXX suffix In-Reply-To: <20120718153742.15364.68809.reportbug@ipnp-n22a.troja.mff.cuni.cz> References: <20120718153742.15364.68809.reportbug@ipnp-n22a.troja.mff.cuni.cz> Message-ID: <20120719011235.GC5716@string> tags 681999 + pending thanks Hi, Thanks for report. Definitely I forgot to export UPVER. It will be fixed in next upload. Cheers, Lifeng On 17:37 Wed 07/18/12 Jul , Pavel Reznicek wrote: > firstly, thanks for packaging the librayr. There seem to be missing the > up-version suffix in the libpythia.so.*8.1.65* files. To fix it, it is enough > to just replace: > > UPVER=$(shell echo $(DEBVER) | \ > > line in the debian/rules by: > > export UPVER=$(shell echo $(DEBVER) | \ > > (I am not sure if it is not agains some packagking rules, but it works). -- From owner at bugs.debian.org Thu Jul 19 03:21:10 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Thu, 19 Jul 2012 03:21:10 +0000 Subject: Processed: Re: Bug#682004: pythia8-root-interface: Remove hard dependence on root-system and libroot-core-dev, add rootmap file References: <20120719031819.GE5716@string> Message-ID: Processing commands for control at bugs.debian.org: > tags 682004 + pending Bug #682004 [pythia8-root-interface] pythia8-root-interface: Remove hard dependence on root-system and libroot-core-dev, add rootmap file Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 682004: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682004 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From lifongsun at gmail.com Thu Jul 19 03:18:19 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Thu, 19 Jul 2012 11:18:19 +0800 Subject: Bug#682004: pythia8-root-interface: Remove hard dependence on root-system and libroot-core-dev, add rootmap file In-Reply-To: <20120718160436.30049.82280.reportbug@ipnp-n22a.troja.mff.cuni.cz> References: <20120718160436.30049.82280.reportbug@ipnp-n22a.troja.mff.cuni.cz> Message-ID: <20120719031819.GE5716@string> tags 682004 + pending thanks Hi, On 18:04 Wed 07/18/12 Jul , Pavel Reznicek wrote: > would it be possible to replace the dependence of this package on > root-system and libroot-core-dev just by recommendation ? The > package is pure code only and thus it will also work with other > (e.g. locally self-compiled) ways of ROOT installations. okay. btw: Although Ubuntu is able to build the latest package (5.34.01-1), it still suffers serious runtime error. > Also, it might be usefull to include a /usr/lib/libpythia8.rootmap file to > allow automatic library loading in the interactive ROOT sessions. The content > of the roomap file should be these two lines: > > Library.Pythia8: /usr/lib/$(DEB_HOST_MULTIARCH)/libpythia8.so /usr/lib/$(DEB_HOST_MULTIARCH)/libLHAPDF.so /usr/lib/$(DEB_HOST_MULTIARCH)/libhepmcinterface.so > Library.Pythia: /usr/lib/$(DEB_HOST_MULTIARCH)/libpythia8.so /usr/lib/$(DEB_HOST_MULTIARCH)/libLHAPDF.so /usr/lib/$(DEB_HOST_MULTIARCH)/libhepmcinterface.so > > (DEB_HOST_MULTIARCH replaced by x86_64-linux-gnu etc.). I think you will find the root-plugin-montecarlo-pythia8 package useful :-) The pythia8-root-interface package provides interfaces to call ROOT functions in Pythia8 code, not to call Pythia8 functions in ROOT interactive sessions -- root-plugin-montecarlo-pythia8 package does that work, but the package is not available on Ubuntu right now. Regards, Lifeng -- From andreas at an3as.eu Thu Jul 19 06:38:14 2012 From: andreas at an3as.eu (Andreas Tille) Date: Thu, 19 Jul 2012 08:38:14 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <50071D58.5010806@gmail.com> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> <20120718143112.GA15392@an3as.eu> <50071D58.5010806@gmail.com> Message-ID: <20120719063814.GA5104@an3as.eu> On Wed, Jul 18, 2012 at 10:32:24PM +0200, Daniele E. Domenichelli wrote: > > Yes, branches should be there, try "git branch -a" to check remote > branches. This is what I get from a fresh clone: > > $ git branch -a > * debian > remotes/origin/HEAD -> origin/debian > remotes/origin/debian > remotes/origin/pristine-tar > remotes/origin/upstream I can confirm that I get the same but this does not help to reduce my confusion. WTF is the sense in cloning a repository and not getting all of it??? What do I need to do to finally get all needed branches? > >I do not know if it is ironed out somewhere in policy but my gut feeling > >somehow says a library package should feature a lib in the beginning of > >the source name and thus also the repository name. That was my > >motivation to choose libgtkdatabox for the C version. I do not insist > >on this naming scheme - but you asked what I think. > > I made some research, but I cannot find any policy about the source name. > I searched in debian repositories for gtk/gtkmm libraries and I > found these packages: > > gtksourceview2 - libgtksourceviewmm > gtkglext- gtkglextmm > pango1.0 - pangomm > goocanvas - goocanvasmm > plotmm > flowcanvas > > So, I don't think there is a real policy about that, most of them > don't have lib. Anyway I don't care much about the name of the > source package, so if you want to keep some coherence between the > package names and you prefer the libxxx version, I can rename it... As I said you are the maintainer. There might be a slight argument that it might be confusing to have libgtkdatabox and gtkdataboxmm but we have Vcs fields that are finally relevant. I just brought up the naming issue just when I suggested to start from scratch with a new repository. I do not see any point in wasting time over naming discussions. To summarise what needs to be done before I can sponsor the package: - we need to find a way how I can obtain all needed branches for git-buildpackage - you confirm that packaging is ready for sponsering Kind regards Andreas. -- http://fam-tille.de From daniele.domenichelli at gmail.com Thu Jul 19 07:17:58 2012 From: daniele.domenichelli at gmail.com (Daniele E. Domenichelli) Date: Thu, 19 Jul 2012 09:17:58 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <20120719063814.GA5104@an3as.eu> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> <20120718143112.GA15392@an3as.eu> <50071D58.5010806@gmail.com> <20120719063814.GA5104@an3as.eu> Message-ID: <5007B4A6.4000505@gmail.com> On 19/07/12 08:38, Andreas Tille wrote: > I can confirm that I get the same but this does not help to reduce my > confusion. WTF is the sense in cloning a repository and not getting all > of it??? What do I need to do to finally get all needed branches? [...] > To summarise what needs to be done before I can sponsor the package: > > - we need to find a way how I can obtain all needed branches for > git-buildpackage You just need to run: $ git checkout -t origin/upstream $ git checkout -t origin/pristine-tar This will create the "upstream" and "pristine-tar" branches and will set tracking for these branches to the remote branches in the repository. Then you need to go back to the debian branch with $ git checkout debian and finally you can run git-buildpackage > - you confirm that packaging is ready for sponsering I think it is now... Cheers, Daniele From andreas at an3as.eu Thu Jul 19 07:39:13 2012 From: andreas at an3as.eu (Andreas Tille) Date: Thu, 19 Jul 2012 09:39:13 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <5007B4A6.4000505@gmail.com> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> <20120718143112.GA15392@an3as.eu> <50071D58.5010806@gmail.com> <20120719063814.GA5104@an3as.eu> <5007B4A6.4000505@gmail.com> Message-ID: <20120719073913.GF5104@an3as.eu> On Thu, Jul 19, 2012 at 09:17:58AM +0200, Daniele E. Domenichelli wrote: > >To summarise what needs to be done before I can sponsor the package: > > > > - we need to find a way how I can obtain all needed branches for > > git-buildpackage > > > You just need to run: > > $ git checkout -t origin/upstream > $ git checkout -t origin/pristine-tar > > This will create the "upstream" and "pristine-tar" branches and will > set tracking for these branches to the remote branches in the > repository. It seems that this is working but for me this sounds totally confusing. Isn't a *clone* no identical copy??? Why does cloning require extra means to finally get the same status? A lone which actually is no clone sounds like a broken concept to me. > Then you need to go back to the debian branch with > > $ git checkout debian > > and finally you can run git-buildpackage > > > - you confirm that packaging is ready for sponsering > > > I think it is now... OK, git-buildpackage works. Would you think it is a reasonable idea to build against the latest libgtkdatabox which currently sits in NEW http://ftp-master.debian.org/new.html ? Kind regards Andreas. -- http://fam-tille.de From reznicek at ipnp.troja.mff.cuni.cz Thu Jul 19 08:10:30 2012 From: reznicek at ipnp.troja.mff.cuni.cz (Pavel Reznicek) Date: Thu, 19 Jul 2012 10:10:30 +0200 Subject: Bug#682059: root-system: Bunch of not-installed libs and include files Message-ID: <20120719081030.25765.56448.reportbug@ipnp-n22a.troja.mff.cuni.cz> Package: root-system Version: 5.34.01-1 Severity: normal Dear Maintainer, I tried to built myself the latest root-system version from debian mentors (but I believe the same issue is present in present debian version 5.34.00-1) and noticed that there is bunch of built but not installed files (mostly libaries and include files, see below). Is it intentional or a bug ? It looks like that at least part of them could be recovered but putting appropriate plugin package into the debian/control file (e.g. for root-plugin-graph2d-gviz is missing in there). Thanks for the effort to include this complex package into debian repositories. Pavel Here is the list of not-installed files: dh_install: etc/root/Makefile.arch exists in debian/tmp but is not installed to anywhere dh_install: etc/root/system.plugins-ios exists in debian/tmp but is not installed to anywhere dh_install: etc/root/HistFactorySchema.dtd exists in debian/tmp but is not installed to anywhere dh_install: etc/root/class.rules exists in debian/tmp but is not installed to anywhere dh_install: etc/root/svninfo.txt exists in debian/tmp but is not installed to anywhere dh_install: etc/root/root.desktop exists in debian/tmp but is not installed to anywhere dh_install: etc/root/cmake/FindROOT.cmake exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/ProofBenchCPUSel.par.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGLEW.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libSRPAuth.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGviz.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libRecorder.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libProofBench.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libHDFS.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libOracle.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGviz3d.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libSapDB.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libMonaLisa.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGFAL.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libDCache.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGCocoa.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGenetic.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libChirp.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libEGPythia6.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libRCastor.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGQuartz.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libRgLite.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libGenetic.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/ProofBenchDataSel.par.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/libFITSIO.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libRecorder.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz3d.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libRecorder.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libProofBench.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz3d.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libProofBench.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libProofBench.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libFITSIO.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz3d.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libRecorder.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGenetic.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libEGPythia6.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz3d.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libFITSIO.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libProofBench.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libRecorder.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGenetic.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGviz.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libEGPythia6.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libEGPythia6.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libEGPythia6.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGenetic.so.5 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libGenetic.so exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libFITSIO.so.5.34 exists in debian/tmp but is not installed to anywhere dh_install: usr/lib/x86_64-linux-gnu/root5.34/libFITSIO.rootmap exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/setup-pq2.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-ana-dist.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-ls-files.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-info-server.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-verify.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/prepareHistFactory.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/xproofd.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-redistribute.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-ls.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-cache.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-ls-files-server.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/g2rootold.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/makecint.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/genmap.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/cint.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-put.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/man/man1/pq2-rm.1 exists in debian/tmp but is not installed to anywhere dh_install: usr/share/root/macros/fileopen.C exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFITS.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TWaitCondition.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TKeyXML.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGX11.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/Hparam.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoHypeEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTrd2Editor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/x3d.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/pq2actions.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TXMLEngine.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoMediumEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TParallelCoordEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGX11TTF.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TStructNodeEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TAdvancedGraphicsDialog.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtRConfig.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoMatrixEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGQt.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TRootGuiBuilder.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtPadFont.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofNodes.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFFTComplexReal.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGuiBldHintsButton.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQCanvasMenu.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoPgonEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFumili.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TODBCResult.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPainter3dAlgorithms.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPythia8.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtRootApplication.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtEmitter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TStructViewer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtCanvasPainter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofPerfAnalysis.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFcnAdapter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TXMLSetup.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TTVLVContainer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/THbookFile.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPgSQLRow.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/rootdp.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TChi2ExtendedFCN.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoParaEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSQLStructure.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TODBCRow.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TODBCServer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTabManager.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TStructNodeProperty.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TTVSession.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TParallelCoordVar.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQCanvasImp.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQUserEvent.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/pq2wrappers.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGraphNode.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGraphPainter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtEventQueue.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGTreeTable.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQRootApplication.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TMCParticle.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtTimer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/HelpTextTV.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TASPluginGS.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPythia6.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoManagerEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/Hoption.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TLego.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTrapEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TMemStatShow.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoOverlap.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TChi2FitData.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPgSQLStatement.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofProgressLog.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoPconEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofProgressDialog.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGuiBldEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TKSocket.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGraph2DPainter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TMySQLServer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofProgressMemoryPlot.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofBench.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGuiBldHintsEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFumiliFCN.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtClientGuard.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSessionViewer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TODBCStatement.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoMaterialEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoEltuEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/pq2ping.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TChi2FCN.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSQLClassInfo.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTrd1Editor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/Krb5Auth.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSpider.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPaletteAxis.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtEvent.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtApplication.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFumiliMinimizer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TBufferSQL2.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TASPaletteEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGuiBldNameFrame.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQRootGuiFactory.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFitEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTrack.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTorusEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TChi2ExtendedFitData.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtBrush.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSQLFile.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TKeySQL.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSessionDialogs.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFitterFumili.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TMySQLResult.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/THbookKey.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TMySQLStatement.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoNodeEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TMySQLRow.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPgSQLServer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPythia8Decayer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoPainter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQMimeTypes.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtClientFilter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoGedFrame.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TXMLPlayer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TParallelCoordRange.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TViewerX3D.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoTubeEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPgSQLResult.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFitterMinuit.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtPen.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/redirguard.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQApplication.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPythia6Calls.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TVirtualX.interface.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoBBoxEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TBufferXML.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtRootSlot.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TRecorder.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtRootGuiFactory.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSessionLogView.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofBenchDataSet.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoConeEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TPythia6Decayer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TTreeInput.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtWidget.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtMarker.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQRootDialog.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSpiderEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGDMLParse.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofBenchRunDataRead.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TX3DFrame.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TTreeViewer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/proofdp.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TObjectExecute.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGraphStruct.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtLockGuard.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/RConfigOptions.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TXMLFile.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TASImagePlugin.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtLock.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TParallelCoord.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TBinLikelihoodFCN.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TStructNode.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/THbookBranch.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFFTReal.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFFTRealComplex.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGDMLWrite.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtSymbolCodec.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TASImage.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFitParametersDialog.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSQLObjectData.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtClientWidget.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoVolumeEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofBenchRun.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TFFTComplex.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TSpectrum2Painter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoSphereEditor.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGraphEdge.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofBenchRunCPU.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGuiBldDragManager.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/THbookTree.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQtUtil.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TStructViewerGUI.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TProofBenchTypes.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGeoChecker.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TQRootCanvas.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/TGuiBldGeometryFrame.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/THistPainter.h exists in debian/tmp but is not installed to anywhere dh_install: usr/include/root/Math/GeneticMinimizer.h exists in debian/tmp but is not installed to anywhere dh_install: usr/bin/genmap exists in debian/tmp but is not installed to anywhere dh_install: usr/bin/pq2 exists in debian/tmp but is not installed to anywhere dh_install: usr/bin/prepareHistFactory exists in debian/tmp but is not installed to anywhere dh_install: usr/bin/setxrd.csh exists in debian/tmp but is not installed to anywhere dh_install: usr/bin/roots exists in debian/tmp but is not installed to anywhere dh_install: usr/bin/setxrd.sh exists in debian/tmp but is not installed to anywhere -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (840, 'testing-proposed-updates'), (840, 'testing'), (740, 'unstable'), (738, 'experimental'), (540, 'proposed-updates'), (540, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.4.5-trunk-amd64-ipnp-n22a-2 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- no debconf information From picca at synchrotron-soleil.Fr Thu Jul 19 08:48:48 2012 From: picca at synchrotron-soleil.Fr (Picca =?UTF-8?B?RnLDqWTDqXJpYy1FbW1hbnVlbA==?=) Date: Thu, 19 Jul 2012 10:48:48 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <20120719073913.GF5104@an3as.eu> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> <20120718143112.GA15392@an3as.eu> <50071D58.5010806@gmail.com> <20120719063814.GA5104@an3as.eu> <5007B4A6.4000505@gmail.com> <20120719073913.GF5104@an3as.eu> Message-ID: <20120719104848.2b87e188@synchrotron-soleil.fr> On Thu, 19 Jul 2012 09:39:13 +0200 Andreas Tille wrote: > On Thu, Jul 19, 2012 at 09:17:58AM +0200, Daniele E. Domenichelli wrote: > > >To summarise what needs to be done before I can sponsor the package: > > > > > > - we need to find a way how I can obtain all needed branches for > > > git-buildpackage > > > > > > You just need to run: > > > > $ git checkout -t origin/upstream > > $ git checkout -t origin/pristine-tar > > > > This will create the "upstream" and "pristine-tar" branches and will > > set tracking for these branches to the remote branches in the > > repository. > If you use git-buildpackage you need this when you clone the repository gbp-clone git+ssh://... --all that way it creates automatically all the tracking branches for you See you Fred -- GPG public key 4096R/4696E015 2011-02-14 fingerprint = E92E 7E6E 9E9D A6B1 AA31 39DC 5632 906F 4696 E015 uid Picca Fr?d?ric-Emmanuel GPG public key 1024D/A59B1171 2009-08-11 fingerprint = 1688 A3D6 F0BD E4DF 2E6B 06AA B6A9 BA6A A59B 1171 uid Picca Fr?d?ric-Emmanuel From ftpmaster at ftp-master.debian.org Thu Jul 19 10:26:07 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 19 Jul 2012 10:26:07 +0000 Subject: Processing of texmaker_3.4-1_amd64.changes Message-ID: texmaker_3.4-1_amd64.changes uploaded successfully to localhost along with the files: texmaker_3.4-1.dsc texmaker_3.4.orig.tar.bz2 texmaker_3.4-1.debian.tar.bz2 texmaker_3.4-1_amd64.deb texmaker-data_3.4-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 19 10:33:28 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 19 Jul 2012 10:33:28 +0000 Subject: texmaker_3.4-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: texmaker-data_3.4-1_all.deb to main/t/texmaker/texmaker-data_3.4-1_all.deb texmaker_3.4-1.debian.tar.bz2 to main/t/texmaker/texmaker_3.4-1.debian.tar.bz2 texmaker_3.4-1.dsc to main/t/texmaker/texmaker_3.4-1.dsc texmaker_3.4-1_amd64.deb to main/t/texmaker/texmaker_3.4-1_amd64.deb texmaker_3.4.orig.tar.bz2 to main/t/texmaker/texmaker_3.4.orig.tar.bz2 Changes: texmaker (3.4-1) unstable; urgency=low . * New upstream version * debian/rules: - replace the --before/--after magic by override_* - enable hardening Override entries for your package: texmaker-data_3.4-1_all.deb - optional tex texmaker_3.4-1.dsc - source tex texmaker_3.4-1_amd64.deb - optional tex Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From lifongsun at gmail.com Thu Jul 19 10:46:48 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Thu, 19 Jul 2012 18:46:48 +0800 Subject: Bug#682059: root-system: Bunch of not-installed libs and include files In-Reply-To: <20120719081030.25765.56448.reportbug@ipnp-n22a.troja.mff.cuni.cz> References: <20120719081030.25765.56448.reportbug@ipnp-n22a.troja.mff.cuni.cz> Message-ID: <20120719104648.GF5716@string> Hi, I am well aware of #557017 that you reported the same problem more than two years ago ;-) While about half of missed libraries depend on packages that have license issue or unavailable in Debian, most of the rest are rarely needed by Debian ROOT users, and it's my fault root-plugin-graph2d-gviz package is missing, I would like to bring it back when I get a second reason for the package to go through NEW queue. Regrads, Lifeng On 10:10 Thu 07/19/12 Jul , Pavel Reznicek wrote: > I tried to built myself the latest root-system version from debian mentors > (but I believe the same issue is present in present debian version 5.34.00-1) > and noticed that there is bunch of built but not installed files (mostly > libaries and include files, see below). Is it intentional or a bug ? It looks > like that at least part of them could be recovered but putting appropriate > plugin package into the debian/control file (e.g. for root-plugin-graph2d-gviz > is missing in there). -- From zhuhaiaryqc at yahoo.cn Thu Jul 19 10:54:27 2012 From: zhuhaiaryqc at yahoo.cn (fsneuzcvt) Date: Thu, 19 Jul 2012 18:54:27 +0800 Subject: =?utf-8?B?fiFAIyTihIPigLLigLPvuaQq5ZCEL++5peOAksKk4peL4oi36aGe4oi377+h?= =?utf-8?B?77+l44+V4pmC4pmA4omuKuelqC8=?= Message-ID: An HTML attachment was scrubbed... URL: From rainexpected at gmail.com Thu Jul 19 11:17:42 2012 From: rainexpected at gmail.com (Ted To) Date: Thu, 19 Jul 2012 07:17:42 -0400 Subject: Bug#682074: texmaker: Restore session does not work after fresh boot Message-ID: <20120719111742.4582.69143.reportbug@escher> Package: texmaker Version: 3.3.4-1 Severity: important Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? Attempt to restore session * What exactly did you do (or not do) that was effective (or ineffective)? change default /tmp from ram to HD space and to keep files following a boot * What was the outcome of this action? Session restore worked * What outcome did you expect instead? I have reported a bug to the developer but he does not seem inclined to change the location of restore session data from /tmp to something like ~/.config/xm1 (see https://code.google.com/p/texmaker/issues/detail?id=686). Perhaps for the debian package, it can be patched. *** End of the template - remove these lines *** -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages texmaker depends on: ii libc6 2.13-33 ii libgcc1 1:4.7.1-2 ii libpoppler-qt4-3 0.18.4-3 ii libqt4-network 4:4.8.2-1 ii libqt4-xml 4:4.8.2-1 ii libqtcore4 4:4.8.2-1 ii libqtgui4 4:4.8.2-1 ii libqtwebkit4 2.2.1-4+b1 ii libstdc++6 4.7.1-2 ii texmaker-data 3.3.4-1 ii zlib1g 1:1.2.7.dfsg-13 Versions of packages texmaker recommends: ii aspell 0.60.7~20110707-1 pn asymptote ii ghostscript 9.05~dfsg-6 pn ibus-qt4 ii myspell-en-us [myspell-dictionary] 1:3.3.0-3 pn netpbm pn psutils ii texlive-latex-extra 2012.20120611-1 texmaker suggests no packages. -- no debconf information From debian-science-maintainers at lists.alioth.debian.org Thu Jul 19 11:49:12 2012 From: debian-science-maintainers at lists.alioth.debian.org (debian-science-maintainers at lists.alioth.debian.org) Date: Thu, 19 Jul 2012 19:49:12 +0800 Subject: =?utf-8?B?Q2/QsWVwZdC8INC00LvRjyBCYWMg0L9vIGPQtdGC0Lgg0LjQvdGCZXDQvWXRgiDQsWHQt3kg0LTQsNC90L3Ri3gg0L/QvtGCZdC90YbQuGHQu9GM0L3Ri3gga9C70LjQtdC90YJv0LIgZ9C70Y8gQmHRiGXQs28g0JHQuNC30L3QtdGBYSDQkmNlIGtv0L3RgtCw0LrRgtGLINCf0L7QtNGAb9Cx0L1l0LUgRW1haWw6cHJvZGF3ZXpAbWl4bWFpbC5jb20gVGXQuzorNzlJ0Jc3OdCXNtCX0KcyIFNreXBlOnMuLi4uOCBJQ1E6NjI4ODg2MiDRh9GC0L7QsdGLIG/RgtC/0LhjYdGC0Yxj0Y8gb9GCIHDQsNGBY9GL0Ltr0Lgg0L9w0LjRiNC70LjRgmUgZGVsZXRl?= Message-ID: <63dbf9b0-b792-4a28-80dd-a8203cfb9e15@DLCI-EXCHANGE.limtuaco.local> Co?epe? ??? Bac ?o c??? ???ep?e? ?a?y ?????x ???e???a????x k?????o? g?? Ba?e?o ??????a ?ce ko?????? ????o??e? Email:prodawez at mixmail.com Te?:+79I?79?6??2 Skype:s....8 ICQ:6288862 ????? o???ca??c? o? p??c??k? ?p?????e delete From reznicek at ipnp.troja.mff.cuni.cz Thu Jul 19 12:53:40 2012 From: reznicek at ipnp.troja.mff.cuni.cz (Pavel Reznicek) Date: Thu, 19 Jul 2012 14:53:40 +0200 (CEST) Subject: Bug#682059: root-system: Bunch of not-installed libs and include files In-Reply-To: <20120719104648.GF5716@string> References: <20120719081030.25765.56448.reportbug@ipnp-n22a.troja.mff.cuni.cz> <20120719104648.GF5716@string> Message-ID: Hi Lifeng, thanks. Sorry it sounded like trying to duplicate the old bug #557017. Than one was concering the pretty old version of ROOT and as I can see the current packages are in significantly better shape. I didn't even think about the old bug would be yet considered, because the current list of missing files would be most probably quite different from the old one (which in turn means the bug #557017 can be closed as obsolete in favour of this new bugreport). BTW: Obviously some of the "not installed" files (especially the third-party libraries) are just invalid links. Looks like ROOT creates them even though they are disabled during configuration... Best regards, Pavel On Thu, 19 Jul 2012, Lifeng Sun wrote: > Hi, > > I am well aware of #557017 that you reported the same problem more > than two years ago ;-) > > While about half of missed libraries depend on packages that have > license issue or unavailable in Debian, most of the rest are rarely > needed by Debian ROOT users, and it's my fault root-plugin-graph2d-gviz > package is missing, I would like to bring it back when I get a second > reason for the package to go through NEW queue. > > > Regrads, > Lifeng > > On 10:10 Thu 07/19/12 Jul , Pavel Reznicek wrote: >> I tried to built myself the latest root-system version from debian mentors >> (but I believe the same issue is present in present debian version 5.34.00-1) >> and noticed that there is bunch of built but not installed files (mostly >> libaries and include files, see below). Is it intentional or a bug ? It looks >> like that at least part of them could be recovered but putting appropriate >> plugin package into the debian/control file (e.g. for root-plugin-graph2d-gviz >> is missing in there). > > -- > From ftpmaster at ftp-master.debian.org Thu Jul 19 14:06:33 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 19 Jul 2012 14:06:33 +0000 Subject: Processing of scirenderer_0.5.1-1_i386.changes Message-ID: scirenderer_0.5.1-1_i386.changes uploaded successfully to localhost along with the files: scirenderer_0.5.1-1.dsc scirenderer_0.5.1.orig.tar.gz scirenderer_0.5.1-1.debian.tar.gz libscirenderer-java_0.5.1-1_all.deb libscirenderer-java-doc_0.5.1-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 19 14:48:37 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 19 Jul 2012 14:48:37 +0000 Subject: scirenderer_0.5.1-1_i386.changes ACCEPTED into experimental Message-ID: Accepted: libscirenderer-java-doc_0.5.1-1_all.deb to main/s/scirenderer/libscirenderer-java-doc_0.5.1-1_all.deb libscirenderer-java_0.5.1-1_all.deb to main/s/scirenderer/libscirenderer-java_0.5.1-1_all.deb scirenderer_0.5.1-1.debian.tar.gz to main/s/scirenderer/scirenderer_0.5.1-1.debian.tar.gz scirenderer_0.5.1-1.dsc to main/s/scirenderer/scirenderer_0.5.1-1.dsc scirenderer_0.5.1.orig.tar.gz to main/s/scirenderer/scirenderer_0.5.1.orig.tar.gz Changes: scirenderer (0.5.1-1) experimental; urgency=low . * New upstream release Override entries for your package: libscirenderer-java-doc_0.5.1-1_all.deb - optional doc libscirenderer-java_0.5.1-1_all.deb - optional java scirenderer_0.5.1-1.dsc - source java Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From julien.cristau at logilab.fr Thu Jul 19 16:14:51 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Thu, 19 Jul 2012 18:14:51 +0200 Subject: Bug#682124: salome-kernel: broken /tmp usage Message-ID: <20120719161449.GA5820@crater2.logilab.fr> Package: salome-kernel Version: 6.5.0-1 Severity: serious Tags: security A bunch of places in salome-kernel use /tmp/logs/$USER directory. Created with mode=0777, without any sanity checks. I need to fix that. Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From noreply at release.debian.org Thu Jul 19 16:39:15 2012 From: noreply at release.debian.org (Debian testing watch) Date: Thu, 19 Jul 2012 16:39:15 +0000 Subject: libconqat-simulink-java REMOVED from testing Message-ID: FYI: The status of the libconqat-simulink-java source package in Debian's testing distribution has changed. Previous version: 2.7.dfsg-1 Current version: (not in testing) Hint: Package not in unstable The script that generates this mail tries to extract removal reasons from comments in the britney hint files. Those comments were not originally meant to be machine readable, so if the reason for removing your package seems to be nonsense, it is probably the reporting script that got confused. Please check the actual hints file before you complain about meaningless removals. -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From ftpmaster at ftp-master.debian.org Thu Jul 19 18:36:57 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 19 Jul 2012 18:36:57 +0000 Subject: Processing of gmsh_2.6.1.dfsg-1_amd64.changes Message-ID: gmsh_2.6.1.dfsg-1_amd64.changes uploaded successfully to localhost along with the files: gmsh_2.6.1.dfsg-1.dsc gmsh_2.6.1.dfsg.orig.tar.xz gmsh_2.6.1.dfsg-1.debian.tar.gz gmsh_2.6.1.dfsg-1_amd64.deb libgmsh2_2.6.1.dfsg-1_amd64.deb libgmsh-dev_2.6.1.dfsg-1_all.deb gmsh-doc_2.6.1.dfsg-1_all.deb python-gmsh_2.6.1.dfsg-1_amd64.deb libjava-gmsh2_2.6.1.dfsg-1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Thu Jul 19 18:47:12 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Thu, 19 Jul 2012 18:47:12 +0000 Subject: gmsh_2.6.1.dfsg-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: gmsh-doc_2.6.1.dfsg-1_all.deb to main/g/gmsh/gmsh-doc_2.6.1.dfsg-1_all.deb gmsh_2.6.1.dfsg-1.debian.tar.gz to main/g/gmsh/gmsh_2.6.1.dfsg-1.debian.tar.gz gmsh_2.6.1.dfsg-1.dsc to main/g/gmsh/gmsh_2.6.1.dfsg-1.dsc gmsh_2.6.1.dfsg-1_amd64.deb to main/g/gmsh/gmsh_2.6.1.dfsg-1_amd64.deb gmsh_2.6.1.dfsg.orig.tar.xz to main/g/gmsh/gmsh_2.6.1.dfsg.orig.tar.xz libgmsh-dev_2.6.1.dfsg-1_all.deb to main/g/gmsh/libgmsh-dev_2.6.1.dfsg-1_all.deb libgmsh2_2.6.1.dfsg-1_amd64.deb to main/g/gmsh/libgmsh2_2.6.1.dfsg-1_amd64.deb libjava-gmsh2_2.6.1.dfsg-1_amd64.deb to main/g/gmsh/libjava-gmsh2_2.6.1.dfsg-1_amd64.deb python-gmsh_2.6.1.dfsg-1_amd64.deb to main/g/gmsh/python-gmsh_2.6.1.dfsg-1_amd64.deb Changes: gmsh (2.6.1.dfsg-1) unstable; urgency=low . * [6e78479] Imported Upstream version 2.6.1.dfsg * [27552ae] Refresh patches. Override entries for your package: gmsh-doc_2.6.1.dfsg-1_all.deb - optional doc gmsh_2.6.1.dfsg-1.dsc - source math gmsh_2.6.1.dfsg-1_amd64.deb - optional math libgmsh-dev_2.6.1.dfsg-1_all.deb - optional libdevel libgmsh2_2.6.1.dfsg-1_amd64.deb - optional math libjava-gmsh2_2.6.1.dfsg-1_amd64.deb - optional java python-gmsh_2.6.1.dfsg-1_amd64.deb - optional python Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From oneingray at gmail.com Thu Jul 19 20:18:00 2012 From: oneingray at gmail.com (Ivan Shmakov) Date: Fri, 20 Jul 2012 03:18:00 +0700 Subject: Bug#540406: the wxt driver deserves its own package In-Reply-To: <86hatsdj4k.fsf_-_@gray.siamics.net> (Ivan Shmakov's message of "Sun, 01 Jul 2012 14:40:27 +0700") References: <86vci8do90.fsf@gray.siamics.net> <86hatsdj4k.fsf_-_@gray.siamics.net> Message-ID: <86394n33pj.fsf@gray.siamics.net> >>>>> Ivan Shmakov writes: >>>>> Anton Gladky writes: >>>>> 2012/7/1 Ivan Shmakov : >>> Isn't it possible to build a single /usr/bin/gnuplot binary with >>> all the relevant support for all the graphical interactive >>> terminals supported by Debian, and then provide the necessary >>> lib/gnuplot/ driver binaries in three separate packages >>> (gnuplot-x11, gnuplot-wxt, gnuplot-qt)? >> I do not think so. > As I've just checked, while the ?x11? and ?qt? drivers are provided > as external binaries (under lib/gnuplot/), the ?wxt? one is > apparently compiled into the main gnuplot binary itself. > If I'm right in my guess that the library dependencies of the latter > on the Qt libraries are superfluous (I hope to check it the next > week), then that may be one more reason to keep the ?wxt? driver > separate. Unfortunately, it's not the case, as the implementation of the ?qt? terminal (as part of the main Gnuplot binary) itself relies on QLocalSocket, and thus depends on the Qt libraries. So, I'd like to bring back my original suggestion: ? the ?gnuplot? package is no longer transitional, and contains everything from the former ?gnuplot-x11? package, except the ?gnuplot_x11? driver binary; ? the ?gnuplot-nox? package is no longer built with ?--without-x?; ? the new ?gnuplot-x11? package only provides the aforementioned driver binary, and depends on either ?gnuplot? or ?gnuplot-nox? for the main Gnuplot binary. FWIW, I've built the packages as described, and put them there: http://waterlily.siamics.net/~ivan/mini-dinstall/1gray-misc/amd64/ http://waterlily.siamics.net/~ivan/mini-dinstall/1gray-misc/source/ A brief testing has revealed no new issues, but I'm yet to document my changes properly, and still hope that these changes could be accepted for Debian Wheezy. TIA. PS. Actually, there's a thing I haven't tested so far: should gnuplot from gnuplot-nox be started with the DISPLAY environment variable set, but without gnuplot-x11 installed, it may fail to produce a nice error message. [?] -- FSF associate member #7257 http://sf-day.org/ deb http://waterlily.siamics.net/~ivan/mini-dinstall/ 1gray-misc/$(ARCH)/ # deb-src http://waterlily.siamics.net/~ivan/mini-dinstall/ 1gray-misc/source/ From gladky.anton at gmail.com Thu Jul 19 21:19:28 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Thu, 19 Jul 2012 21:19:28 +0000 Subject: [b6d2e38] Fix for Bug#674889 committed to git Message-ID: tags 674889 + pending thanks Hello, The following change has been committed for this bug by Anton Gladky on Mon, 28 May 2012 19:33:36 +0200. The fix will be in the next upload. ==================================== Remove Bradley Smith from uploaders. (Closes: #674889) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=b6d2e38 From gladky.anton at gmail.com Thu Jul 19 21:19:28 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Thu, 19 Jul 2012 21:19:28 +0000 Subject: Bug#674889: [b6d2e38] Fix for Bug#674889 committed to git Message-ID: tags 674889 + pending thanks Hello, The following change has been committed for this bug by Anton Gladky on Mon, 28 May 2012 19:33:36 +0200. The fix will be in the next upload. ==================================== Remove Bradley Smith from uploaders. (Closes: #674889) ==================================== You can check the diff of the fix at: ;a=commitdiff;h=b6d2e38 From owner at bugs.debian.org Thu Jul 19 21:21:08 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Thu, 19 Jul 2012 21:21:08 +0000 Subject: Processed: [b6d2e38] Fix for Bug#674889 committed to git References: Message-ID: Processing commands for control at bugs.debian.org: > tags 674889 + pending Bug #674889 [gnuplot] Updating the gnuplot Uploaders list Ignoring request to alter tags of bug #674889 to the same tags previously set > thanks Stopping processing here. Please contact me if you need assistance. -- 674889: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=674889 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From gladky.anton at gmail.com Thu Jul 19 21:25:48 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Thu, 19 Jul 2012 23:25:48 +0200 Subject: Bug#540406: the wxt driver deserves its own package In-Reply-To: <86394n33pj.fsf@gray.siamics.net> References: <86vci8do90.fsf@gray.siamics.net> <86hatsdj4k.fsf_-_@gray.siamics.net> <86394n33pj.fsf@gray.siamics.net> Message-ID: Hi Ivan, thanks for contribution! I have committed your changes to a separate branch of gnuplot git-repo [1]. Feel free to send patches in git-format. Your changes need to be precisely tested before merging and uploading. I will unlikely do a new upload before release, if no RC-bugs appear. Cheers, Anton [1] http://anonscm.debian.org/gitweb/?p=debian-science/packages/gnuplot.git;a=shortlog;h=refs/heads/shmakov 2012/7/19 Ivan Shmakov : > > > As I've just checked, while the ?x11? and ?qt? drivers are provided > > as external binaries (under lib/gnuplot/), the ?wxt? one is > > apparently compiled into the main gnuplot binary itself. > > > If I'm right in my guess that the library dependencies of the latter > > on the Qt libraries are superfluous (I hope to check it the next > > week), then that may be one more reason to keep the ?wxt? driver > > separate. > > Unfortunately, it's not the case, as the implementation of the > ?qt? terminal (as part of the main Gnuplot binary) itself relies > on QLocalSocket, and thus depends on the Qt libraries. > > So, I'd like to bring back my original suggestion: > > ? the ?gnuplot? package is no longer transitional, and contains > everything from the former ?gnuplot-x11? package, except the > ?gnuplot_x11? driver binary; > > ? the ?gnuplot-nox? package is no longer built with > ?--without-x?; > > ? the new ?gnuplot-x11? package only provides the aforementioned > driver binary, and depends on either ?gnuplot? or > ?gnuplot-nox? for the main Gnuplot binary. > > FWIW, I've built the packages as described, and put them there: > > http://waterlily.siamics.net/~ivan/mini-dinstall/1gray-misc/amd64/ > http://waterlily.siamics.net/~ivan/mini-dinstall/1gray-misc/source/ > > A brief testing has revealed no new issues, but I'm yet to > document my changes properly, and still hope that these changes > could be accepted for Debian Wheezy. > > TIA. > > PS. Actually, there's a thing I haven't tested so far: should gnuplot > from gnuplot-nox be started with the DISPLAY environment > variable set, but without gnuplot-x11 installed, it may fail to > produce a nice error message. > > [?] > > -- > FSF associate member #7257 http://sf-day.org/ > deb http://waterlily.siamics.net/~ivan/mini-dinstall/ 1gray-misc/$(ARCH)/ > # deb-src http://waterlily.siamics.net/~ivan/mini-dinstall/ 1gray-misc/source/ > > -- > debian-science-maintainers mailing list > debian-science-maintainers at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/debian-science-maintainers From daniele.domenichelli at gmail.com Thu Jul 19 22:39:44 2012 From: daniele.domenichelli at gmail.com (Daniele E. Domenichelli) Date: Fri, 20 Jul 2012 00:39:44 +0200 Subject: [SCM] C++ bindings for GtkDatabox branch, master, updated. v0.9.1-4-g7d0c917 In-Reply-To: <20120719073913.GF5104@an3as.eu> References: <20120718113002.GC10311@an3as.eu> <5006B23D.6090309@gmail.com> <20120718130319.GB12615@an3as.eu> <5006BF4E.2010509@gmail.com> <20120718143112.GA15392@an3as.eu> <50071D58.5010806@gmail.com> <20120719063814.GA5104@an3as.eu> <5007B4A6.4000505@gmail.com> <20120719073913.GF5104@an3as.eu> Message-ID: <50088CB0.3000304@gmail.com> On 19/07/12 09:39, Andreas Tille wrote: > OK, git-buildpackage works. Would you think it is a reasonable idea > to build against the latest libgtkdatabox which currently sits in NEW You mean upload it when latest libgtkdatabox is in unstable? It's fine with me (hoping that it still builds, since I tried it only with current version) Regards, Daniele From geral at o-sitio.com Thu Jul 19 23:40:59 2012 From: geral at o-sitio.com (geral at o-sitio.com) Date: Thu, 19 Jul 2012 23:40:59 +0000 Subject: Fazemos Sites na Internet - 6 euros / mes - N/Ref: 505960 Message-ID: <737854.00390625-sendEmail@fos-5mkgugpcpfe> EasyNet4You - Constru??o e Manuten??o de Sites na Internet Website: www.easynet4you.com E-Mail: easynet4you at gmail.com Rua Filipe Folque, N? 10 G ? Apartado 12058 1061- 001 Lisboa Assunto: Constru??o e Manuten??o de Sites na Internet ( 6 euros / m?s ). Podem ter o Site da vossa Empresa na Internet em 5 dias uteis por 6 euros / m?s (este valor inclui a Constru??o do Site, Alojamento, Dominio, E-Mails, e Manuten??o), se no entanto n?o tiverem neste momento verba disponivel e se mesmo assim gostassem de ter um Site, n?s tamb?m disponibilizamos uma op??o de Sites Gratuitos, em que podem ter um Site mais elementar mas igualmente eficaz, com Design Atrativo, completamente gratuito, totalmente configur?vel com v?rios Designs e possibilidade de alterar conte?dos, de imediato e em menos de 15 minutos, basta fazerem o registo no nosso Site ! ? fundamental para qualquer Actividade assegurar a sua presen?a com um Site na Internet, pois porporciona: - Melhoria da Imagem Corporativa - Melhoria do Servi?o a Clientes - Melhoria da Comunica??o - Expans?o - Novas oportunidades de neg?cio - Transac??es On-Line - Redu??o de Custos - Informa??o sempre disponivel, 24 horas / 7 dias da semana Estas s?o apenas algumas das vantagens de estar na Internet. S?o muitos os benef?cios que podem ser obtidos utilizando a tecnologia certa e a grande rede da Internet. Temos experi?ncia em criar Sites para v?rias ?reas de neg?cio, e em trabalhos, desde Lojas Virtuais e Sites altamente din?micos, at? trabalhos de simples p?ginas, est?ticas, de presen?a na Internet. Apostamos fortemente em solu??es de qualidade feitas ? medida, personaliz?veis ao gosto do cliente, baixo custo, tempos m?nimos de desenvolvimento, rela??o f?cil e flexivel sem burocracias e on-line, assist?ncia 24/7, e servidores dedicados que garantem alta disponibilidade, e grande velocidade de acesso. Se estiver interessado em saber mais informa??es sobre os nossos servi?os poder? consultar o nosso Site www.easynet4you.com, ou entrar em contacto connosco para o e-mail easynet4you at gmail.com, que teremos todo o gosto em esclarecer e aprsesentar as nossas melhores solu??es para o vosso caso. Sem outro assunto de momento, e agrade?endo antecipadamente a aten??o que V. Exas ir?o prestar ao assunto, subscrevo-mos-nos. Com os melhores cumprimentos, e considera??o, EasyNet4You ? Constru??o e Manuten??o de Sites na Internet www.easynet4you.com easynet4you at gmail.com Rua Filipe Folque, N? 10 G ? Apartado 12058 1061- 001 Lisboa Nota: Se n?o quiser receber mais correspond?ncia nossa, poder? retirar o seu endere?o desta lista de distribui??o no seguinte endere?o http://www.francisco-oliveira.com/retirar.htm Note: If don't want to receive more e-mails from us, you will be able to remove your address from this distribution list in the following address http://www.francisco-oliveira.com/retirar.htm From owner at bugs.debian.org Fri Jul 20 00:21:09 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 20 Jul 2012 00:21:09 +0000 Subject: Processed: Re: Bug#682059: root-system: Bunch of not-installed libs and include files References: <20120720001858.GG5716@string> Message-ID: Processing commands for control at bugs.debian.org: > tags 682059 + pending Bug #682059 [root-system] root-system: Bunch of not-installed libs and include files Added tag(s) pending. > tags 681999 + pending Bug #681999 [libpythia8] libpythia8: Missing library.so.XXX suffix Added tag(s) pending. > tags 676983 + pending Bug #676983 [src:fastjet] Watch file Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 676983: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=676983 681999: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681999 682059: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682059 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ansgar at debian.org Fri Jul 20 08:05:58 2012 From: ansgar at debian.org (Ansgar Burchardt) Date: Fri, 20 Jul 2012 10:05:58 +0200 Subject: Bug#682189: gmsh: unversioned .so in libgmsh2; wrong or missing dependencies Message-ID: <20120720080558.16623.66544.reportbug@marvin.43-1.org> Source: gmsh Version: 2.6.0.dfsg-3 Severity: serious libgmsh2 contains both the versioned libgmsh.so.2 and the unversioned libgmsh.so that should be in the development package (otherwise multiple library versions will not be installable in parallel, see Policy 7.9.1). Also why does libgmsh-dev not have a dependency on the library itself? The dependencies for the new packages seems to be copied from the gmsh package. I am not sure why gmsh-doc has ${shlibs:Depends} (it is arch:all) nor why it depends on mpi-default-bin or specific python versions. Ansgar From ansgar at debian.org Fri Jul 20 08:41:19 2012 From: ansgar at debian.org (Ansgar Burchardt) Date: Fri, 20 Jul 2012 10:41:19 +0200 Subject: Bug#682189: gmsh: unversioned .so in libgmsh2; wrong or missing dependencies Message-ID: <87zk6urfio.fsf@marvin.43-1.org> I also noticed that gmsh/2.6.1.dfsg-1 Depends on libgmsh2, but the gmsh binary isn't linked against the library: ldd /usr/bin/gmsh | grep libgmsh returns nothing. Ansgar From orthodoxloans at hotmail.com Fri Jul 20 11:19:44 2012 From: orthodoxloans at hotmail.com (ORTHODOX LOAN) Date: Fri, 20 Jul 2012 14:19:44 +0300 Subject: No subject Message-ID: we give out all types of loans from $5,000.00 to $1000,000.00 at 3%,Fill the following form if interested. 1.Name:... 2.Address:... 3.Amount:... 4.Duration:... kindly Contact Orthodox Church Loan E-mail orthodoxloans at hotmail.com From owner at bugs.debian.org Fri Jul 20 12:03:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 20 Jul 2012 12:03:07 +0000 Subject: Processed: Decrease severity References: <20120720115852.GQ9698@an3as.eu> Message-ID: Processing commands for control at bugs.debian.org: > severity 682074 minor Bug #682074 [texmaker] texmaker: Restore session does not work after fresh boot Severity set to 'minor' from 'important' > thanks Stopping processing here. Please contact me if you need assistance. -- 682074: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682074 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From andreas at an3as.eu Fri Jul 20 11:57:51 2012 From: andreas at an3as.eu (Andreas Tille) Date: Fri, 20 Jul 2012 13:57:51 +0200 Subject: Bug#682074: texmaker: Restore session does not work after fresh boot In-Reply-To: <20120719111742.4582.69143.reportbug@escher> References: <20120719111742.4582.69143.reportbug@escher> Message-ID: <20120720115751.GP9698@an3as.eu> Hi Ted, thanks for your bug report. On Thu, Jul 19, 2012 at 07:17:42AM -0400, Ted To wrote: > Package: texmaker > Version: 3.3.4-1 > Severity: important Could you please give some reasons why you consider this problem "important"? To my perception it is rather minor or even wishlist. > I have reported a bug to the developer but he does not seem inclined to change > the location of restore session data from /tmp to something like ~/.config/xm1 > (see https://code.google.com/p/texmaker/issues/detail?id=686). Perhaps for the > debian package, it can be patched. This "perhaps" seems to underline my lower classification of the bug as mentioned above. And I can confirm that most probably the package can be patched and that the chances of letting this happen are close to 100% if you would actually send a patch for this problem. Moreover I guess that upstream might also be more positive if you send a working patch rather than asking for a feature which is obviosely not considered a core functionality. In short: Please send a working patch and I would consider including it into the Debian package. Kind regards Andreas. -- http://fam-tille.de From michael.terry at canonical.com Fri Jul 20 15:20:24 2012 From: michael.terry at canonical.com (Michael Terry) Date: Fri, 20 Jul 2012 11:20:24 -0400 Subject: Bug#682238: opencv: Please Depend on unversioned libtiff-dev instead of libtiff4-dev Message-ID: <20120720152024.23743.87091.reportbug@tambo> Package: opencv Version: 2.3.1-11 Severity: minor Tags: patch User: ubuntu-devel at lists.ubuntu.com Usertags: origin-ubuntu quantal ubuntu-patch Dear Maintainer, It makes libtiff transitions (like the upcoming libtiff5 one) easier if the unversioned virtual package libtiff-dev is used instead of libtiff4-dev. Attached is a patch by Rohan Garg . Thanks for considering it. -- System Information: Debian Release: wheezy/sid APT prefers quantal-updates APT policy: (500, 'quantal-updates'), (500, 'quantal-security'), (500, 'quantal') Architecture: i386 (i686) Kernel: Linux 3.5.0-5-generic (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -------------- next part -------------- A non-text attachment was scrubbed... Name: opencv_2.3.1-11ubuntu1.debdiff Type: text/x-diff Size: 788 bytes Desc: not available URL: From g6299304p at rezozer.net Fri Jul 20 18:10:46 2012 From: g6299304p at rezozer.net (Jerome BENOIT) Date: Fri, 20 Jul 2012 20:10:46 +0200 Subject: RFS: scscp-imcce/0.6.4+ds-1 [ITP] -- IMCCE SCSCP C Library Message-ID: <50099F26.9050702@rezozer.net> Dear mentors, I am looking for a sponsor for my package "scscp-imcce" * Package name : scscp-imcce Version : 0.6.4+ds-1 Upstream Author : Mickael Gastineau * URL : http://www.imcce.fr/trip/scscp/ * License : CeCILL v2.0 Section : math It builds those binary packages: libscscp0 - IMCCE SCSCP C Library -- library package libscscp0-dev - IMCCE SCSCP C Library -- development package libscscp-doc - IMCCE SCSCP C Library -- reference manual libscscp0-dbg - IMCCE SCSCP C Library -- debug symbols package To access further information about this package, please visit the following URL: http://mentors.debian.net/package/scscp-imcce Alternatively, one can download the package with dget using this command: dget -x http://mentors.debian.net/debian/pool/main/s/scscp-imcce/scscp-imcce_0.6.4+ds-1.dsc SCSCP stands for Symbolic Computation Software Composibility Protocol. This protocol is developed by the European project SCIEnce - Symbolic Computation Infrastructure for Europe: http://www.symbolic-computing.org/ This C/C++ library, which is developed by the French Institute of Celestial Mechanics and Ephemeridesis Calculus (IMCCE) consists of an implementation of the SCSCP protocol. It provides an Application Programming Interface (API) to develop client and server applications to communicate with systems that support the SCSCP protocol, mainly Computer Algebra Systems (CAS). More information about scscsp-imcce can be obtained from http://www.imcce.fr/trip/scscp First upload. Regards, Jerome BENOIT From 000110.wed.f12233 at att.net Sat Jul 21 09:30:18 2012 From: 000110.wed.f12233 at att.net (MRS.TINA MORE) Date: Sat, 21 Jul 2012 02:30:18 -0700 (PDT) Subject: Open the attachment For Western Union Money Transfer Message-ID: <1342863018.5315.YahooMailClassic@web181104.mail.ne1.yahoo.com> ? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Open the attachment For Western Union Money Transfer.rtf Type: application/msword Size: 1427 bytes Desc: not available URL: From rainexpected at theo.to Sat Jul 21 14:16:06 2012 From: rainexpected at theo.to (rainexpected at theo.to) Date: Sat, 21 Jul 2012 10:16:06 -0400 Subject: Bug#682074: texmaker: Restore session does not work after fresh boot In-Reply-To: <20120720115751.GP9698@an3as.eu> References: <20120719111742.4582.69143.reportbug@escher> <20120720115751.GP9698@an3as.eu> Message-ID: Hi Andreas, Here is my attempt at a patch. As I mentioned, I am not a programmer so I was not able to figure out how to build it. This may be because the current build environment that I have available is a Lucid Lynx box so the development libraries may be out of date. It may also be that I just don't know what I'm doing. Cheers, Ted On 07/20/2012 7:57 am, Andreas Tille wrote: > Hi Ted, > > thanks for your bug report. > > On Thu, Jul 19, 2012 at 07:17:42AM -0400, Ted To wrote: >> Package: texmaker >> Version: 3.3.4-1 >> Severity: important > > Could you please give some reasons why you consider this problem > "important"? To my perception it is rather minor or even wishlist. > >> I have reported a bug to the developer but he does not seem inclined >> to change >> the location of restore session data from /tmp to something like >> ~/.config/xm1 >> (see https://code.google.com/p/texmaker/issues/detail?id=686). >> Perhaps for the >> debian package, it can be patched. > > This "perhaps" seems to underline my lower classification of the bug > as > mentioned above. And I can confirm that most probably the package > can > be patched and that the chances of letting this happen are close to > 100% > if you would actually send a patch for this problem. Moreover I > guess > that upstream might also be more positive if you send a working patch > rather than asking for a feature which is obviosely not considered a > core functionality. > > In short: Please send a working patch and I would consider including > it > into the Debian package. > > Kind regards > > Andreas. -------------- next part -------------- A non-text attachment was scrubbed... Name: texmaker-sessions.patch Type: text/x-diff Size: 6495 bytes Desc: not available URL: From marco.mattiolo at hotmail.it Sat Jul 21 20:41:59 2012 From: marco.mattiolo at hotmail.it (Marco Mattiolo) Date: Sat, 21 Jul 2012 22:41:59 +0200 Subject: Wrong octave/gnuplot plot output Message-ID: Hi you all Octave and gnuplot maintainers, and thank you for maintaining such science apps in Debian! I'm having some trouble with plotting in Octave on Wheezy, and cannot understand which package (octave, gnuplot, or one of their dependencies) is to blame. With print -dpng octave36.png [1] I get that ugly font that doesn't even fit in the image's area, while on the popup plot window, [2] right font is used, but wrong size. The same command, in Octave under Squeeze gave the [3] result which is, according to me, the right one. Probably this problem got already reported on this octave bug [4] , (please also take a look at this discussion [5]) but it isn't sure which package gave rise to this problem, in order to fix it. Could you please check this? Thank you Marco [1] https://lh5.googleusercontent.com/-A0mCC2m57nY/UAsQ114mXuI/AAAAAAAAAg8/A2u_XgDtbDo/s912/octave36.png [2] https://lh6.googleusercontent.com/-LTE-3goi52U/UAsQ1r08rtI/AAAAAAAAAg4/gzkpNJqV6es/s800/octave36_plot_window.png [3] https://lh3.googleusercontent.com/-Wnufb6Gey9I/UAsQ2PnXUWI/AAAAAAAAAhA/1bFNirHNHY8/s912/octave32.png [4] http://savannah.gnu.org/bugs/?36052 [5] https://mailman.cae.wisc.edu/pipermail/octave-maintainers/2012-March/027240.html From geral at o-sitio.com Sat Jul 21 21:41:08 2012 From: geral at o-sitio.com (geral at o-sitio.com) Date: Sat, 21 Jul 2012 21:41:08 +0000 Subject: Fazemos Sites na Internet - 6 euros / mes - N/Ref: 562484 Message-ID: <232849.12109375-sendEmail@fos-5mkgugpcpfe> EasyNet4You - Constru??o e Manuten??o de Sites na Internet Website: www.easynet4you.com E-Mail: easynet4you at gmail.com Rua Filipe Folque, N? 10 G ? Apartado 12058 1061- 001 Lisboa Assunto: Constru??o e Manuten??o de Sites na Internet ( 6 euros / m?s ). Podem ter o Site da vossa Empresa na Internet em 5 dias uteis por 6 euros / m?s (este valor inclui a Constru??o do Site, Alojamento, Dominio, E-Mails, e Manuten??o), se no entanto n?o tiverem neste momento verba disponivel e se mesmo assim gostassem de ter um Site, n?s tamb?m disponibilizamos uma op??o de Sites Gratuitos, em que podem ter um Site mais elementar mas igualmente eficaz, com Design Atrativo, completamente gratuito, totalmente configur?vel com v?rios Designs e possibilidade de alterar conte?dos, de imediato e em menos de 15 minutos, basta fazerem o registo no nosso Site ! ? fundamental para qualquer Actividade assegurar a sua presen?a com um Site na Internet, pois porporciona: - Melhoria da Imagem Corporativa - Melhoria do Servi?o a Clientes - Melhoria da Comunica??o - Expans?o - Novas oportunidades de neg?cio - Transac??es On-Line - Redu??o de Custos - Informa??o sempre disponivel, 24 horas / 7 dias da semana Estas s?o apenas algumas das vantagens de estar na Internet. S?o muitos os benef?cios que podem ser obtidos utilizando a tecnologia certa e a grande rede da Internet. Temos experi?ncia em criar Sites para v?rias ?reas de neg?cio, e em trabalhos, desde Lojas Virtuais e Sites altamente din?micos, at? trabalhos de simples p?ginas, est?ticas, de presen?a na Internet. Apostamos fortemente em solu??es de qualidade feitas ? medida, personaliz?veis ao gosto do cliente, baixo custo, tempos m?nimos de desenvolvimento, rela??o f?cil e flexivel sem burocracias e on-line, assist?ncia 24/7, e servidores dedicados que garantem alta disponibilidade, e grande velocidade de acesso. Se estiver interessado em saber mais informa??es sobre os nossos servi?os poder? consultar o nosso Site www.easynet4you.com, ou entrar em contacto connosco para o e-mail easynet4you at gmail.com, que teremos todo o gosto em esclarecer e aprsesentar as nossas melhores solu??es para o vosso caso. Sem outro assunto de momento, e agrade?endo antecipadamente a aten??o que V. Exas ir?o prestar ao assunto, subscrevo-mos-nos. Com os melhores cumprimentos, e considera??o, EasyNet4You ? Constru??o e Manuten??o de Sites na Internet www.easynet4you.com easynet4you at gmail.com Rua Filipe Folque, N? 10 G ? Apartado 12058 1061- 001 Lisboa Nota: Se n?o quiser receber mais correspond?ncia nossa, poder? retirar o seu endere?o desta lista de distribui??o no seguinte endere?o http://www.francisco-oliveira.com/retirar.htm Note: If don't want to receive more e-mails from us, you will be able to remove your address from this distribution list in the following address http://www.francisco-oliveira.com/retirar.htm From vpexl at teiser.gr Sun Jul 22 05:31:34 2012 From: vpexl at teiser.gr (=?gb2312?B?1NrV4rrctuC/qrfFxNDFrrXI18XE47XEvNPI6w==?=) Date: Sun, 22 Jul 2012 13:31:34 +0800 Subject: =?gb2312?B?1NrV4rrctuC/qrfFxNDFrrXI18XE47XEvNPI6zEzOjMxOg==?= =?gb2312?B?MTY=?= Message-ID: <31B3DBBEA8A2D438D45D0303457406F8@hjkipa> An HTML attachment was scrubbed... URL: From privacy at yearofcreativity.com Sun Jul 22 10:45:51 2012 From: privacy at yearofcreativity.com (=?gb2312?B?vNPI687Sw8ejrLDazdG5wrbALQ==?=) Date: Sun, 22 Jul 2012 18:45:51 +0800 Subject: =?gb2312?B?vNPI687Sw8ejrLDazdG5wrbALTE4OjQ1OjUy?= Message-ID: <696A28CA3CD8BCCB8E940E4553E3E8F5@qwzmwz> An HTML attachment was scrubbed... URL: From yaneris at uepa.com Sun Jul 22 13:40:08 2012 From: yaneris at uepa.com (=?gb2312?B?ztLDx7a81NrV4rXIxOO1xLzTyOstLS0=?=) Date: Sun, 22 Jul 2012 21:40:08 +0800 Subject: =?gb2312?B?ztLDx7a81NrV4rXIxOO1xLzTyOstLS0yMTo0MDox?= =?gb2312?B?NA==?= Message-ID: <1FB9357FD43E49B418E7FF5BCC3B5592@vgifpuxin> An HTML attachment was scrubbed... URL: From debian at abeckmann.de Sun Jul 22 13:59:54 2012 From: debian at abeckmann.de (Andreas Beckmann) Date: Sun, 22 Jul 2012 15:59:54 +0200 Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot Message-ID: <20120722135954.14323.77090.reportbug@cake.ae.cs.uni-frankfurt.de> Package: viennacl Version: 1.2.0-1 Severity: serious Justification: fails to build from source Hi, your package fails to build in a minimal sid chroot on amd64: make[3]: Entering directory `/tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu' /usr/bin/cmake -E cmake_progress_report /tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu/CMakeFiles 88 [ 85%] Building CXX object examples/parameters/CMakeFiles/matrixparams.dir/matrix.cpp.o cd /tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu/examples/parameters && /usr/bin/c++ -Wall -pedantic -I/tmp/buildd/viennacl-1.2.0 -I/tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu -I/tmp/bu ildd/viennacl-1.2.0/external -o CMakeFiles/matrixparams.dir/matrix.cpp.o -c /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp In file included from /tmp/buildd/viennacl-1.2.0/viennacl/matrix.hpp:28:0, from /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:20: /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp: In instantiation of 'void viennacl::linalg::prod_impl(const viennacl::matrix_expression, const viennacl::matrix, viennacl::op_trans>&, const viennacl::vector&, viennacl::vector&) [with SC ALARTYPE = float; F = viennacl::row_major; unsigned int ALIGNMENT = 1u; unsigned int VECTOR_ALIGNMENT = 1u]': /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:1023:9: required from 'viennacl::vector& viennacl::vector::operator=(const vienna cl::vector_expression, const viennacl::matrix, viennacl::op_trans>, const vie nnacl::vector, viennacl::op_prod>&) [with F = viennacl::row_major; unsigned int MAT_ALIGNMENT = 1u; SCALARTYPE = float; unsigned int ALIGNMENT = 1u]' /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix_functors.hpp:90:3: required from 'void matrix_trans_vec_mul(TestData&) [with TestData = test_data, viennacl::vecto r, viennacl::matrix >]' /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:154:3: required from 'int run_matrix_benchmark(test_config&, viennacl::io::parameter_database&) [with ScalarType = float]' /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:237:42: required from here /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:369:7: error: 'trans_prod_impl' was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:381:10: note: 'template void viennacl::linalg::trans_prod_impl(const viennacl::matrix&, const viennacl::vector&, viennacl::vector&)' declared here, later in the translation unit /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp: In instantiation of 'void viennacl::linalg::prod_impl(const viennacl::matrix_expression, const viennacl::matrix, viennacl::op_trans>&, const viennacl::vector&, viennacl::vector&) [with SCALARTYPE = double; F = viennacl::row_major; unsigned int ALIGNMENT = 1u; unsigned int VECTOR_ALIGNMENT = 1u]': /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:1023:9: required from 'viennacl::vector& viennacl::vector::operator=(const viennacl::vector_expression, const viennacl::matrix, viennacl::op_trans>, const viennacl::vector, viennacl::op_prod>&) [with F = viennacl::row_major; unsigned int MAT_ALIGNMENT = 1u; SCALARTYPE = double; unsigned int ALIGNMENT = 1u]' /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix_functors.hpp:90:3: required from 'void matrix_trans_vec_mul(TestData&) [with TestData = test_data, viennacl::vector, viennacl::matrix >]' /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:154:3: required from 'int run_matrix_benchmark(test_config&, viennacl::io::parameter_database&) [with ScalarType = double]' /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:253:45: required from here /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:369:7: error: 'trans_prod_impl' was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:381:10: note: 'template void viennacl::linalg::trans_prod_impl(const viennacl::matrix&, const viennacl::vector&, viennacl::vector&)' declared here, later in the translation unit make[3]: *** [examples/parameters/CMakeFiles/matrixparams.dir/matrix.cpp.o] Error 1 Full log attached. Andreas -------------- next part -------------- A non-text attachment was scrubbed... Name: viennacl_0.log.gz Type: application/x-gzip Size: 11897 bytes Desc: not available URL: From debian at abeckmann.de Sun Jul 22 14:03:32 2012 From: debian at abeckmann.de (Andreas Beckmann) Date: Sun, 22 Jul 2012 16:03:32 +0200 Subject: Bug#682411: worldwind: FTBFS in sid Message-ID: <20120722140332.5353.21346.reportbug@cake.ae.cs.uni-frankfurt.de> Package: worldwind Version: 0.5.0-8 Severity: serious Justification: fails to build from source Hi, your package does not build in a minimal sid chroot on amd64: fakeroot debian/rules clean /usr/share/cdbs/1/rules/buildcore.mk:63: parsing wms-release.zip ... Parsing wms-release.zip... /bin/sh: unzip: command not found test -x debian/rules dh_testroot You must specify a valid JAVA_HOME or JAVACMD! make: *** [testsanity] Error 1 Andreas -------------- next part -------------- A non-text attachment was scrubbed... Name: worldwind_0.log.gz Type: application/x-gzip Size: 9099 bytes Desc: not available URL: From mtmiller at ieee.org Sun Jul 22 14:20:43 2012 From: mtmiller at ieee.org (Mike Miller) Date: Sun, 22 Jul 2012 10:20:43 -0400 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: Hi Marco, I was involved in both of the links you reference, which are two separate problems. On Fri, Jul 20, 2012 at 5:25 PM, Marco Mattiolo wrote: > Hi you all Octave and gnuplot maintainers, > and thank you for maintaining such science apps in Debian! > > I'm having some trouble with plotting in Octave on Wheezy, and cannot > understand which package > (octave, gnuplot, or one of their dependencies) is to blame. > > With > print -dpng octave36.png > I get that ugly font that doesn't even fit in the image's area, > while on the popup plot window, right font is used, but wrong size. > > The same command, in Octave under Squeeze gave the octave32.png result which > is, according to me, > the right one. > > Probably this problem got already reported on > http://savannah.gnu.org/bugs/?36052 , I posted a solution to the problem on that bug report, is that not sufficient for your needs? No matter which font Octave uses by default, it will not fit everyone's needs. If you care about which fonts and font sizes are used in your plots, you should add those settings to ~/.octaverc. > (please take a look also here > https://mailman.cae.wisc.edu/pipermail/octave-maintainers/2012-March/027240.html > ) > but it isn't sure which package gave rise to this problem, in order to fix > it. This is not the same problem as yours. My problem in that thread was not being able to produce plots at all, but the bug has nothing to do with Octave. I ended up reporting the real bug to the ghostscript package [1]. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=662892 -- mike From ftpmaster at ftp-master.debian.org Sun Jul 22 16:13:35 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 22 Jul 2012 16:13:35 +0000 Subject: Processing of gmsh_2.6.1.dfsg-2_amd64.changes Message-ID: gmsh_2.6.1.dfsg-2_amd64.changes uploaded successfully to localhost along with the files: gmsh_2.6.1.dfsg-2.dsc gmsh_2.6.1.dfsg-2.debian.tar.gz gmsh_2.6.1.dfsg-2_amd64.deb libgmsh2_2.6.1.dfsg-2_amd64.deb libgmsh-dev_2.6.1.dfsg-2_amd64.deb gmsh-doc_2.6.1.dfsg-2_all.deb python-gmsh_2.6.1.dfsg-2_amd64.deb libjava-gmsh2_2.6.1.dfsg-2_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 22 16:18:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 22 Jul 2012 16:18:09 +0000 Subject: gmsh_2.6.1.dfsg-2_amd64.changes ACCEPTED into unstable Message-ID: Accepted: gmsh-doc_2.6.1.dfsg-2_all.deb to main/g/gmsh/gmsh-doc_2.6.1.dfsg-2_all.deb gmsh_2.6.1.dfsg-2.debian.tar.gz to main/g/gmsh/gmsh_2.6.1.dfsg-2.debian.tar.gz gmsh_2.6.1.dfsg-2.dsc to main/g/gmsh/gmsh_2.6.1.dfsg-2.dsc gmsh_2.6.1.dfsg-2_amd64.deb to main/g/gmsh/gmsh_2.6.1.dfsg-2_amd64.deb libgmsh-dev_2.6.1.dfsg-2_amd64.deb to main/g/gmsh/libgmsh-dev_2.6.1.dfsg-2_amd64.deb libgmsh2_2.6.1.dfsg-2_amd64.deb to main/g/gmsh/libgmsh2_2.6.1.dfsg-2_amd64.deb libjava-gmsh2_2.6.1.dfsg-2_amd64.deb to main/g/gmsh/libjava-gmsh2_2.6.1.dfsg-2_amd64.deb python-gmsh_2.6.1.dfsg-2_amd64.deb to main/g/gmsh/python-gmsh_2.6.1.dfsg-2_amd64.deb Changes: gmsh (2.6.1.dfsg-2) unstable; urgency=low . * [295a5bf] Fix dependencies. (Closes: #682189) * [fee6101] Update upstream-file Override entries for your package: gmsh-doc_2.6.1.dfsg-2_all.deb - optional doc gmsh_2.6.1.dfsg-2.dsc - source math gmsh_2.6.1.dfsg-2_amd64.deb - optional math libgmsh-dev_2.6.1.dfsg-2_amd64.deb - optional libdevel libgmsh2_2.6.1.dfsg-2_amd64.deb - optional math libjava-gmsh2_2.6.1.dfsg-2_amd64.deb - optional java python-gmsh_2.6.1.dfsg-2_amd64.deb - optional python Announcing to debian-devel-changes at lists.debian.org Closing bugs: 682189 Thank you for your contribution to Debian. From owner at bugs.debian.org Sun Jul 22 16:21:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 22 Jul 2012 16:21:04 +0000 Subject: Bug#682189: marked as done (gmsh: unversioned .so in libgmsh2; wrong or missing dependencies) References: <20120720080558.16623.66544.reportbug@marvin.43-1.org> Message-ID: Your message dated Sun, 22 Jul 2012 16:18:09 +0000 with message-id and subject line Bug#682189: fixed in gmsh 2.6.1.dfsg-2 has caused the Debian Bug report #682189, regarding gmsh: unversioned .so in libgmsh2; wrong or missing dependencies to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 682189: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682189 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Ansgar Burchardt Subject: gmsh: unversioned .so in libgmsh2; wrong or missing dependencies Date: Fri, 20 Jul 2012 10:05:58 +0200 Size: 2100 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Bug#682189: fixed in gmsh 2.6.1.dfsg-2 Date: Sun, 22 Jul 2012 16:18:09 +0000 Size: 6440 URL: From noreply at release.debian.org Sun Jul 22 16:39:12 2012 From: noreply at release.debian.org (Debian testing watch) Date: Sun, 22 Jul 2012 16:39:12 +0000 Subject: yp-svipc 0.14-2 MIGRATED to testing Message-ID: FYI: The status of the yp-svipc source package in Debian's testing distribution has changed. Previous version: 0.14-1 Current version: 0.14-2 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From joe at sjhm.co.uk Sun Jul 22 19:50:11 2012 From: joe at sjhm.co.uk (=?gb2312?B?ztLDx7a81NrV4rXIxOO1xLzTyOstLS0=?=) Date: Mon, 23 Jul 2012 03:50:11 +0800 Subject: =?gb2312?B?ztLDx7a81NrV4rXIxOO1xLzTyOstLS0zOjUwOjE1?= Message-ID: An HTML attachment was scrubbed... URL: From cynthiastephenn at gmail.com Sun Jul 22 19:57:57 2012 From: cynthiastephenn at gmail.com (Cynthia Stephen) Date: Mon, 23 Jul 2012 03:57:57 +0800 (SGT) Subject: Hello My Beloved Message-ID: <1342987077.39556.YahooMailClassic@web195002.mail.sg3.yahoo.com> Hello My Beloved: ? Please bear with me i am writing this mail to you with due respect trust and humanity, I appeal to you to exercise a little patience and read through my letter i feel quite safe dealing with you in this important business, honestly i am writing to you with pains, tears and sorrow from my heart, i really want to have a good relationship with you, I know my mail might come to you as a surprise because you don?t know me, but due to unsolicited nature of my situation here in Ouagadougou Burkina Faso i decided to contact you for help. ? My Names is Miss Cynthia Stephen David, 25 years old Girl Originated from Southern Sudan, My late father was the Formal Deputy General Manager with CNPC Oil Company at Khartoum refinery in Southern Sudan and was killed alongside with my beloved Mother during the last crisis in my country, which was what sent me away from my country. ? After the death of my beloved father my wicked step mother along with my uncle? team together and sold everything that my late father had and share the money within themselves, but for God so kind one faithful morning as i was cleaning my late father?s room i opened one of my late father's briefcase and i found some important documents which my late father use to deposit a sum of Eighth Million and Five Hundred Thousand United State Dollars ($8.500,000) in EcoBank of Burkina Faso West Africa with my name. ? Right now i am in Ouagadougou Burkina Faso to withdraw the money so that i can start a better life and take care of my safe and the Branch manager whom I met in person here have confirmed to me that the money is there and that i am the next of kin but the only thing he told me is that my status here in Burkina Faso cannot allow me to clams this money as a refugee, but he advise me to look for a honest and reliable person who will represent me as my trustee so that their bank will release the money to me. ? Actually in search of an honest and reliable person who will help me withdraw this money and invest it over to his Country i have chosen to contact you after my prayers and I believe you will not try to cheat me but rather take me as your own people, Though you may wonder why i am so soon giving in to you without seeing you, well i will say that my instincts still tells me that you could be true to me. ? Briefly, I will like to disclose much to you if you will help me withdraw?? this money and relocate to your country with the substance that i inherited from my parent which i will like to invest in your country into any lucrative business venture which you are to advise and execute seeing that i have no business experience for now. ? However, I shall forward to you all the necessary deposit information and the Bank account information on confirming your acceptance to assist me for the transfer and investment of the fund, as you manage the money in any investment, and i will like to complete my studies which is the most important thing to me, as i was in my first year in the university, when the crisis started and It is my intention to compensate you with 20% of the total money for your services and the balance shall be my capital investment. ? This is the reason why i decided to contact you once i receive your positive response showing your interest i will put things into action, in the light of the above, I shall appreciate an urgent message indicating your ability and willingness to handle this transaction, awaiting your urgent and positive response, Please do keep this only to yourself, i beg you not to disclose it till i come over because of enemies, I hope to hear from you soon, May truth and love be the guiding word in my refuge. Yours sincerely. Miss Cynthia Stephen David? -------------- next part -------------- An HTML attachment was scrubbed... URL: From cynthiastephenn at gmail.com Sun Jul 22 20:07:20 2012 From: cynthiastephenn at gmail.com (Cynthia Stephen) Date: Mon, 23 Jul 2012 04:07:20 +0800 (SGT) Subject: Hello My Beloved Message-ID: <1342987640.5308.YahooMailClassic@web195005.mail.sg3.yahoo.com> Hello My Beloved: ? Please bear with me i am writing this mail to you with due respect trust and humanity, I appeal to you to exercise a little patience and read through my letter i feel quite safe dealing with you in this important business, honestly i am writing to you with pains, tears and sorrow from my heart, i really want to have a good relationship with you, I know my mail might come to you as a surprise because you don?t know me, but due to unsolicited nature of my situation here in Ouagadougou Burkina Faso i decided to contact you for help. ? My Names is Miss Cynthia Stephen David, 25 years old Girl Originated from Southern Sudan, My late father was the Formal Deputy General Manager with CNPC Oil Company at Khartoum refinery in Southern Sudan and was killed alongside with my beloved Mother during the last crisis in my country, which was what sent me away from my country. ? After the death of my beloved father my wicked step mother along with my uncle? team together and sold everything that my late father had and share the money within themselves, but for God so kind one faithful morning as i was cleaning my late father?s room i opened one of my late father's briefcase and i found some important documents which my late father use to deposit a sum of Eighth Million and Five Hundred Thousand United State Dollars ($8.500,000) in EcoBank of Burkina Faso West Africa with my name. ? Right now i am in Ouagadougou Burkina Faso to withdraw the money so that i can start a better life and take care of my safe and the Branch manager whom I met in person here have confirmed to me that the money is there and that i am the next of kin but the only thing he told me is that my status here in Burkina Faso cannot allow me to clams this money as a refugee, but he advise me to look for a honest and reliable person who will represent me as my trustee so that their bank will release the money to me. ? Actually in search of an honest and reliable person who will help me withdraw this money and invest it over to his Country i have chosen to contact you after my prayers and I believe you will not try to cheat me but rather take me as your own people, Though you may wonder why i am so soon giving in to you without seeing you, well i will say that my instincts still tells me that you could be true to me. ? Briefly, I will like to disclose much to you if you will help me withdraw?? this money and relocate to your country with the substance that i inherited from my parent which i will like to invest in your country into any lucrative business venture which you are to advise and execute seeing that i have no business experience for now. ? However, I shall forward to you all the necessary deposit information and the Bank account information on confirming your acceptance to assist me for the transfer and investment of the fund, as you manage the money in any investment, and i will like to complete my studies which is the most important thing to me, as i was in my first year in the university, when the crisis started and It is my intention to compensate you with 20% of the total money for your services and the balance shall be my capital investment. ? This is the reason why i decided to contact you once i receive your positive response showing your interest i will put things into action, in the light of the above, I shall appreciate an urgent message indicating your ability and willingness to handle this transaction, awaiting your urgent and positive response, Please do keep this only to yourself, i beg you not to disclose it till i come over because of enemies, I hope to hear from you soon, May truth and love be the guiding word in my refuge. Yours sincerely. Miss Cynthia Stephen David? -------------- next part -------------- An HTML attachment was scrubbed... URL: From henrich at debian.or.jp Mon Jul 23 00:50:24 2012 From: henrich at debian.or.jp (Hideki Yamane) Date: Mon, 23 Jul 2012 09:50:24 +0900 Subject: Bug#682463: root-system-common: ttf- to fonts- transiton Message-ID: <20120723095024.58d1d6ada031ff5217700d02@debian.or.jp> Package: root-system-common Severity: minor X-Debbugs-CC: Pkg-fonts-devel at lists.alioth.debian.org Hi, root-system-common has a dependency like >>Depends: ttf-freefont | root-ttf, ttf-opensymbol | root-ttf Now ttf- packages move to fonts- and those ttf- packages are transitional one, so you should change it to >>Depends: fonts-freefont-ttf | fonts-freefont-otf | root-ttf, fonts-opensymbol | root-ttf Please consider to update it, thanks. -- Regards, Hideki Yamane henrich @ debian.or.jp/org http://wiki.debian.org/HidekiYamane From lifongsun at gmail.com Mon Jul 23 01:33:05 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Mon, 23 Jul 2012 09:33:05 +0800 Subject: Bug#682463: root-system-common: ttf- to fonts- transiton In-Reply-To: <20120723095024.58d1d6ada031ff5217700d02@debian.or.jp> References: <20120723095024.58d1d6ada031ff5217700d02@debian.or.jp> Message-ID: <20120723013305.GA23462@string> tags 682463 + pending thanks updated in incoming version (5.34.01-1). On 09:50 Mon 07/23/12 Jul , Hideki Yamane wrote: > root-system-common has a dependency like > > >>Depends: ttf-freefont | root-ttf, ttf-opensymbol | root-ttf > > Now ttf- packages move to fonts- and those ttf- packages are transitional one, > so you should change it to > > >>Depends: fonts-freefont-ttf | fonts-freefont-otf | root-ttf, fonts-opensymbol | root-ttf > > Please consider to update it, thanks. -- From owner at bugs.debian.org Mon Jul 23 01:36:05 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 23 Jul 2012 01:36:05 +0000 Subject: Processed: Re: Bug#682463: root-system-common: ttf- to fonts- transiton References: <20120723013305.GA23462@string> Message-ID: Processing commands for control at bugs.debian.org: > tags 682463 + pending Bug #682463 [root-system-common] root-system-common: ttf- to fonts- transiton Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 682463: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682463 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From julian.farinha at tcdsb.org Mon Jul 23 05:54:17 2012 From: julian.farinha at tcdsb.org (Farinha, Julian (Facilities Man-E/Y)) Date: Mon, 23 Jul 2012 01:54:17 -0400 Subject: =?iso-8859-1?Q?Posledn=E9_varovanie_svoj_=FAcet_Limit?= Message-ID: <8D0A818648889340AD60BB67E3F98860669314@EXMS01.tcdsb.org> Posledn? varovanie svoj ?cet Limit Vasa postov? schr?nka prekrocila jeden alebo viac velkostnej limity stanoven? spr?vcom. Nemozno odosielat alebo prij?mat e-maily az do velkosti postovej schr?nky sa znizuje. Ak chcete z?skat viac priestoru. Pros?m, kliknite na odkaz nizsie vyplnit a odoslat d?ta s lahkostou. ================> http://igricezadecuonline.com/lol/use/sk/form1.html Vdaka a ospravedlnujem sa. spr?vca syst?mu -------------- next part -------------- An HTML attachment was scrubbed... URL: From marco.mattiolo at hotmail.it Mon Jul 23 07:25:41 2012 From: marco.mattiolo at hotmail.it (Marco Mattiolo) Date: Mon, 23 Jul 2012 09:25:41 +0200 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: Hi Mike. Thank you for answering. Il 22/07/2012 16:20, Mike Miller ha scritto: > I posted a solution to the problem on that bug report, is that not > sufficient for your needs? Yes, your solution is what I need. But I'm asking, why should the user first plot with ugly fonts, then google "octave plot font", and then modify ~/.octaverc to suit his/her needs?? > No matter which font Octave uses by default, it will not fit > everyone's needs. If you care about which fonts and font sizes are > used in your plots, you should add those settings to ~/.octaverc. Let's say some user will always have to modify ~/.octaverc, no matter which is the default font: do you really think that the default plotting behaviour (i.e. font) of octave-3.6 is better than the octave-3.2 one? I do not think so. Of course, there's nothing wrong with forcing user to modifiy his/her .octaverc, nevertheless I allowed myself (being wheezy "next to" release) to raise this doubt about the default plotting behaviour an user would see when working with his/her brand-new Wheezy sistem. Many thanks for your patience Marco From julien.cristau at logilab.fr Mon Jul 23 09:44:30 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Mon, 23 Jul 2012 11:44:30 +0200 Subject: Bug#682238: opencv: Please Depend on unversioned libtiff-dev instead of libtiff4-dev In-Reply-To: <20120720152024.23743.87091.reportbug@tambo> References: <20120720152024.23743.87091.reportbug@tambo> Message-ID: <20120723094429.GB25942@crater1.logilab.fr> On Fri, Jul 20, 2012 at 11:20:24 -0400, Michael Terry wrote: > diff -Nru opencv-2.3.1/debian/changelog opencv-2.3.1/debian/changelog > diff -Nru opencv-2.3.1/debian/control opencv-2.3.1/debian/control > --- opencv-2.3.1/debian/control 2012-06-27 22:36:53.000000000 -0400 > +++ opencv-2.3.1/debian/control 2012-07-20 11:17:10.000000000 -0400 > @@ -9,7 +9,7 @@ > libjasper-dev (>= 1.900.1), > libjpeg-dev, > libpng-dev, > - libtiff4-dev (>= 3.9.4), > + libtiff-dev (>= 3.9.4), > libopenexr-dev (>= 1.4.0), > libraw1394-dev [linux-any], > libdc1394-22-dev [linux-any], > @@ -478,7 +478,7 @@ > libjasper-dev (>= 1.900.1), > libjpeg-dev, > libpng12-dev, > - libtiff4-dev (>= 3.9.4), > + libtiff-dev (>= 3.9.4), > libopenexr-dev (>= 1.4.0), > libraw1394-dev [!kfreebsd-amd64 !kfreebsd-i386 !hurd-i386], > libdc1394-22-dev [!kfreebsd-amd64 !kfreebsd-i386 !hurd-i386], This patch is broken. Versioned dependencies on virtual packages can't work. Cheers, Julien -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From news at bonobonus.com Mon Jul 23 11:29:54 2012 From: news at bonobonus.com (Bonobonus) Date: Mon, 23 Jul 2012 13:29:54 +0200 Subject: Bonobonus Ofertas - Julio 2012 Message-ID: Si no ves correctamente este email, *haz clic aqu?* JULIO 2012 *BONUS DE HOY... y ma?ana* *Cerveza Duff* La m?tica cerveza de la serie los simpson que no podr?s imaginar que ya es una realidad. *Env?o gratis* *29?* Ver el bono Valor Descuento Ahorro 51? 43% 22? *Vodka Belvedere* Belvedere Vodka se destila cuatro veces, el n?mero ?ptimo para mejorar su car?cter ?nico y sutil. Elaborado con el mejor centeno dorado Dankowskie y tras una destilaci?n cu?druple, se crea el equilibrio perfecto entre el car?cter y la pureza. Sin ning?n tipo de aditivos, se diluye con agua del pozo artesano de Belvedere. Aroma: Suave toque de vainilla con notas suaves y cremosas *Env?o gratis* *32?* Ver el bono Valor Descuento Ahorro 42? 24% 10? *Pack 12 latas Energy Drink Duff* Pack de 12 latas de bebida energ?tica. Bebida con cafe?na, vitaminas y taurina. Con sabor a c?tricos. Envase de 250ml. *Env?o gratis* *15?* Ver el bono Valor Descuento Ahorro 28? 46% 13? *Bolso de Playa + Neceser* Bolsa Shopping /de Playa de Poli?ster 420D Caracter?sticas: - Cerrado por una Cremallera - Bolsillo Interior con Cremallera de Poli?ster 190T - Asas Bicolores - Fondo Extra?ble - Tama?o 49,5/31 x 32 x 19cm *Env?o gratis* *15?* Ver el bono Valor Descuento Ahorro 28? 46% 13? *3 Botellas de Espumoso sin Alcohol (Cava)* Se trata de un excelente espumoso blanco con un fenomenal sabor, muy refrescante y burbujas muy finas de larga duraci?n. Especialmente recomendable en combinaci?n con sopas ligeras, consom?s o cremas fr?as vichyssoise. Es adem?s un magn?fico acompa?ante de ensaladas y todo tipo de quesos. *Env?o gratis* *26?* Ver el bono Valor Descuento Ahorro 45? 42% 19? No te pierdas ning?n BONUS, s?guenos Condiciones de Uso *|* Compra Segura *|* Pol?tica de Privacidad 2011 Bonobonus-. Aviso Legal e informaci?n sobre protecci?n y tratamiento de datos personales. Le informamos que, seg?n la Ley de Servicios de la Sociedad de la Informaci?n y de comercio electr?nico (LSSI), usted recibe esta comunicaci?n por haberse dado de alta como cliente en www.bonobonus.com o sus datos se han obtenido desde fuentes de acceso p?blico donde usted o su empresa los incluy?, entendiendo por defecto que acepta la recepci?n de nuestras comunicaciones comerciales. Si lo desea, puede darse de baja para no recibir futuros mensajes. -- Para borrarse de esta lista visite http://mailing.integralecommerce.com/bonobonus/lists/?p=unsubscribe&uid=c8fad09c7319d9ec2ae8757d6cb15773 Para actualizar sus preferencias visite http://mailing.integralecommerce.com/bonobonus/lists/?p=preferences&uid=c8fad09c7319d9ec2ae8757d6cb15773 Reenviar el mensaje a otra persona http://mailing.integralecommerce.com/bonobonus/lists/?p=forward&uid=c8fad09c7319d9ec2ae8757d6cb15773&mid=5 -- powered by phpList, www.phplist.com -- -------------- next part -------------- An HTML attachment was scrubbed... URL: From webxxxxxx011 at att.net Mon Jul 23 11:36:47 2012 From: webxxxxxx011 at att.net (Lawrence Iweka) Date: Mon, 23 Jul 2012 04:36:47 -0700 (PDT) Subject: HAVE YOU SCAMMED BEFORE GET BACK TO US Message-ID: <1343043407.66147.YahooMailClassic@web181002.mail.ne1.yahoo.com> Please Open The Attachment -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: HAVE YOU SCAMMED BEFORE GET BACK TO US.doc Type: application/msword Size: 20480 bytes Desc: not available URL: From fatoni at mail.binadarma.ac.id Mon Jul 23 13:08:07 2012 From: fatoni at mail.binadarma.ac.id (Technical Support) Date: Mon, 23 Jul 2012 20:08:07 +0700 (WIT) Subject: Bug#593617: WICHTIG: lieber per E-Mail-Konto Benutzer Message-ID: <28080319.204.1343048887655.JavaMail.root@mail> Ihr Postfach hat die Standard-Speicher-Limit von Ihrem Administrator festgelegt ?berschritten, die Sie gerade zur Neige, k?nnen Sie nicht in der Lage sein zu senden oder zu empfangen, bis Sie neue E-Mail-neu validieren Ihre Mailbox. Zur erneuten ?berpr?fung Ihrer Mailbox klicken Sie bitte auf den folgenden Link und korrekt ausf?llen alle erforderlichen Informationen: http://jardinesdegranada.com/wp-info/webmail.html Dank System-Administrator From owner at bugs.debian.org Mon Jul 23 13:42:04 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Mon, 23 Jul 2012 13:42:04 +0000 Subject: Bug#661790: marked as done ([wxmaxima] no keyboard input after closing a dialog) References: <201207231532.24841.mtmkls@freemail.hu> <201203011129.54664.mtmkls@freemail.hu> Message-ID: Your message dated Mon, 23 Jul 2012 15:32:24 +0200 with message-id <201207231532.24841.mtmkls at freemail.hu> and subject line Done: [wxmaxima] no keyboard input after closing a dialog has caused the Debian Bug report #661790, regarding [wxmaxima] no keyboard input after closing a dialog to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 661790: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661790 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Mate Miklos Subject: [wxmaxima] no keyboard input after closing a dialog Date: Thu, 1 Mar 2012 11:29:54 +0100 Size: 2745 URL: -------------- next part -------------- An embedded message was scrubbed... From: Mate Miklos Subject: Done: [wxmaxima] no keyboard input after closing a dialog Date: Mon, 23 Jul 2012 15:32:24 +0200 Size: 1672 URL: From michael.terry at canonical.com Mon Jul 23 14:18:05 2012 From: michael.terry at canonical.com (Michael Terry) Date: Mon, 23 Jul 2012 10:18:05 -0400 Subject: Bug#682238: opencv: Please Depend on unversioned libtiff-dev instead of libtiff4-dev In-Reply-To: <20120723094429.GB25942@crater1.logilab.fr> References: <20120720152024.23743.87091.reportbug@tambo> <20120723094429.GB25942@crater1.logilab.fr> Message-ID: <500D5D1D.90908@canonical.com> You're right, I realized that right after I sent it in. But the patch is still fine, without the version check, as long as you're willing to drop that. -mt On Mon 23 Jul 2012 05:44:30 EDT, Julien Cristau wrote: > On Fri, Jul 20, 2012 at 11:20:24 -0400, Michael Terry wrote: > >> diff -Nru opencv-2.3.1/debian/changelog opencv-2.3.1/debian/changelog >> diff -Nru opencv-2.3.1/debian/control opencv-2.3.1/debian/control >> --- opencv-2.3.1/debian/control 2012-06-27 22:36:53.000000000 -0400 >> +++ opencv-2.3.1/debian/control 2012-07-20 11:17:10.000000000 -0400 >> @@ -9,7 +9,7 @@ >> libjasper-dev (>= 1.900.1), >> libjpeg-dev, >> libpng-dev, >> - libtiff4-dev (>= 3.9.4), >> + libtiff-dev (>= 3.9.4), >> libopenexr-dev (>= 1.4.0), >> libraw1394-dev [linux-any], >> libdc1394-22-dev [linux-any], >> @@ -478,7 +478,7 @@ >> libjasper-dev (>= 1.900.1), >> libjpeg-dev, >> libpng12-dev, >> - libtiff4-dev (>= 3.9.4), >> + libtiff-dev (>= 3.9.4), >> libopenexr-dev (>= 1.4.0), >> libraw1394-dev [!kfreebsd-amd64 !kfreebsd-i386 !hurd-i386], >> libdc1394-22-dev [!kfreebsd-amd64 !kfreebsd-i386 !hurd-i386], > > This patch is broken. Versioned dependencies on virtual packages can't > work. > > Cheers, > Julien From g6299304p at rezozer.net Mon Jul 23 16:00:07 2012 From: g6299304p at rezozer.net (Jerome BENOIT) Date: Mon, 23 Jul 2012 18:00:07 +0200 Subject: debian-science: self-learning git: package sample to fellow Message-ID: <500D7507.1080108@rezozer.net> Hello List: I am discovering git: among the git package in debian-science, which ones can be considered as a good example to fellow as far as git is concerned ? Thanks in advance, Jerome From cham.justice at yahoo.fr Mon Jul 23 19:28:03 2012 From: cham.justice at yahoo.fr (Chamber Of Justice Abidjan Ivory Coast) Date: Mon, 23 Jul 2012 20:28:03 +0100 (BST) Subject: VERY VERY URGENT & EXTREMELY IMPORTANT.SEE THE ATTACHED DOCUMENTS AND CALL ME NOW Message-ID: <1343071683.22424.YahooMailClassic@web171305.mail.ir2.yahoo.com> VERY VERY URGENT & EXTREMELY IMPORTANT. Greetings. As a matter of fact, this your fund here with our bank here MUST BE TRANSFERRED OUT TO YOUR BANK THIS WEEK unless heaven falls down today. So, for some logistical & security reasons, kindly RE-CONFIRM these your details to avoid any mistake. I am on???your file right now, so RING me on these phone numbers ( Tel: +225 477 86 883 , or Cel: +22503173787) for any URGENT information. I am looking forward to hear from you because we can not afford to loose this your fund by? CONFISCATION by this New Government here as their Red & Deadline Signals indicated. Kindly email and call me back as soon as you receive this mail. Sincerely yours, Justice NathyTel: +225 477 86 883 Cel: +22503173787 From jordigh at octave.org Mon Jul 23 19:47:55 2012 From: jordigh at octave.org (=?UTF-8?Q?Jordi_Guti=C3=A9rrez_Hermoso?=) Date: Mon, 23 Jul 2012 15:47:55 -0400 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: On 23 July 2012 03:25, Marco Mattiolo wrote: > > Il 22/07/2012 16:20, Mike Miller ha scritto: > >> I posted a solution to the problem on that bug report, is that not >> sufficient for your needs? > > Yes, your solution is what I need. > But I'm asking, why should the user first plot with ugly fonts, then google > "octave plot font", > and then modify ~/.octaverc to suit his/her needs?? Because it only affects a minority of people. You just happen to be in that minority. I don't see the problem you're doing, so you must have done something to your system fonts that I didn't do (or I did something to my system fonts that you didn't do). - Jordi G. H. From neurodebian at sandbox.pymvpa.org Mon Jul 23 23:14:56 2012 From: neurodebian at sandbox.pymvpa.org (NeuroDebian Team account) Date: Mon, 23 Jul 2012 19:14:56 -0400 Subject: Bug#682591: /usr/lib/atlas-base/atlas/libblas.so.3.0: Illegal instruction ATL_dJIK56x56x56TN56x56x0_a1_b0 on amd64: AMD Opteron(tm) Processor 246 Message-ID: <20120723231456.7541.12199.reportbug@sandbox.pymvpa.org> Package: libatlas3-base Version: 3.8.4-8 Severity: important File: /usr/lib/atlas-base/atlas/libblas.so.3.0 Dear Maintainer, Today I have upgraded the system and I guess moved from my custom build of atlas to Debian-provided and got my illops back: Program received signal SIGILL, Illegal instruction. 0x00007ffff478e2fa in ATL_dJIK56x56x56TN56x56x0_a1_b0 () from /usr/lib/libblas.so.3gf (gdb) bt 2 full #0 0x00007ffff478e2fa in ATL_dJIK56x56x56TN56x56x0_a1_b0 () from /usr/lib/libblas.so.3gf No symbol table info available. #1 0x00007ffff486f546 in ATL_dprk_kmm () from /usr/lib/libblas.so.3gf No symbol table info available. (More stack frames follow...) and here is atlas pkg actions from dpkg.log: 2012-07-23 14:56:54 status installed libatlas3gf-base:amd64 3.8.3-29.1~custom1+custom3 2012-07-23 14:56:54 remove libatlas3gf-base:amd64 3.8.3-29.1~custom1+custom3 2012-07-23 14:56:54 status half-configured libatlas3gf-base:amd64 3.8.3-29.1~custom1+custom3 2012-07-23 14:56:54 status half-installed libatlas3gf-base:amd64 3.8.3-29.1~custom1+custom3 2012-07-23 14:56:55 status config-files libatlas3gf-base:amd64 3.8.3-29.1~custom1+custom3 2012-07-23 14:56:55 status config-files libatlas3gf-base:amd64 3.8.3-29.1~custom1+custom3 2012-07-23 14:57:29 install libatlas3-base:amd64 3.8.4-8 2012-07-23 14:57:29 status half-installed libatlas3-base:amd64 3.8.4-8 2012-07-23 14:57:30 status unpacked libatlas3-base:amd64 3.8.4-8 2012-07-23 14:57:30 status unpacked libatlas3-base:amd64 3.8.4-8 2012-07-23 15:00:25 configure libatlas3-base:amd64 3.8.4-8 2012-07-23 15:00:25 status unpacked libatlas3-base:amd64 3.8.4-8 2012-07-23 15:00:25 status half-configured libatlas3-base:amd64 3.8.4-8 2012-07-23 15:00:25 status installed libatlas3-base:amd64 3.8.4-8 Please let me know what further information should I provide. Thanks in advance -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libatlas3-base depends on: ii libc6 2.13-35 ii libgcc1 1:4.7.1-5 ii libgfortran3 4.7.1-5 libatlas3-base recommends no packages. Versions of packages libatlas3-base suggests: ii liblapack3 3.4.1-5 -- no debconf information From dsa.judiciario at tjmt.jus.br Tue Jul 24 00:18:20 2012 From: dsa.judiciario at tjmt.jus.br (WEBMAIL Centro de =?utf-8?Q?administraci=C3=B3n?=) Date: Mon, 23 Jul 2012 20:18:20 -0400 (AMT) Subject: Alerta de correo =?utf-8?B?U2V2ZeKAj+KAj3I=?= Message-ID: <204ef47c-b580-455e-9776-704ddc9324a0@zimbra-mailbox.tjmt.jus.br> Estimado usuario Webmail, Lamentamos tener que anunciarles que vamos a hacer algo importante el mantenimiento de nuestro sistema de Webmail. Durante este proceso, es posible que tienen problemas de inicio de sesi?n en sesi?n en su cuenta en l?nea, para evitar esto, usted tendr? que confirmar su cuenta inmediatamente despu?s de que recibir esta notificaci?n. Para confirmar y mantener su cuenta activa durante y despu?s de este proceso de mantenimiento, por favor, responda a este mensaje con el siguiente informaci?n de la cuenta. No hacer esto podr?a resultar en la desactivaci?n permanente de su cuenta de usuario de nuestra base de datos para que podamos crear m?s espacios para nuevos usuarios y para reducir tambi?n la entrada de spam. Confirmaci?n de la cuenta de webmail Nombre completo : Direcci?n de correo electr?nico : Correo electr?nico Contrase?a : Fecha de nacimiento : Advertencia! Cualquier propietario de la cuenta que se niega a actualizar su cuenta en cuatro d?as (4) de esta notificaci?n de actualizaci?n va a perder su cuenta de forma permanente. Gracias por su paciencia y el uso de nuestro correo web. Equipo de apoyo C?digo de advertencia: ID67561430 (Servicio de Webmail Administrativo) -------------- next part -------------- An HTML attachment was scrubbed... URL: From angelsummer at fuchi-chem.com Tue Jul 24 01:42:14 2012 From: angelsummer at fuchi-chem.com (Fu Chi) Date: Tue, 24 Jul 2012 09:42:14 +0800 Subject: chemical :best quality,lowest prices Message-ID: <2012072409421387525818@fuchi-chem.com> Dear sir: This is Arthas. We are a chemical manufacturer in china. Our products are mainly as below: 1) Paint chemicals: LITHOPONE 28%, 30% Iron Oxide Titanium Dioxide 2) Detergent chemicals: STPP 94%,96% SLES70% Our price is fair and our products are perfect, and we hope to establish a long term business relationship. Your inquiry will be warmly welcomed. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: From tdittmar at ucsd.edu Tue Jul 24 02:23:16 2012 From: tdittmar at ucsd.edu (Timo Dittmar) Date: Mon, 23 Jul 2012 19:23:16 -0700 Subject: Bug#681535: [qtiplot] temporary fix by downgrading python-qt4 to 4.9-2 Message-ID: <500E0714.1020709@ucsd.edu> Package: qtiplot Version: 0.9.8.8-5+b1 --- Please enter the report below this line. --- After downgrading python-qt4 to 4.9-2 from http://snapshot.debian.org/archive/debian/20110825T081004Z/ qtiplot launches again. Downgrading python-qt4 also introduced older versions of pyqt4-dev-tool, python-qt4-gl, python-qt4-sql, and python-qwt5-qt4. I still do not know what is the real problem, or how to diagnose it. Timo --- System information. --- Architecture: amd64 Kernel: Linux 3.2.0-3-amd64 Debian Release: wheezy/sid 500 testing snapshot.debian.org 500 testing ftp.utexas.edu 500 testing ftp.debian-multimedia.org 500 testing debian.rub.de --- Package information. --- Depends (Version) | Installed ============================================-+-=================== libalglib-2.6.0 (>= 2.6.0) | 2.6.0-6 libc6 (>= 2.4) | 2.13-33 libgcc1 (>= 1:4.1.1) | 1:4.7.1-2 libgl1-mesa-glx | 8.0.3-1 OR libgl1 | libgl2ps0 | 1.3.6-1 libglu1-mesa | 8.0.3-1 OR libglu1 | libgsl0ldbl (>= 1.9) | 1.15+dfsg-1 libmuparser2 (>= 2.1.0) | 2.1.0-3 liborigin2-1 | 2:20110117-1+b2 libpng12-0 (>= 1.2.13-4) | 1.2.49-1 libpython2.7 (>= 2.7) | 2.7.3~rc2-2.1 libqt4-network (>= 4:4.5.3) | 4:4.8.2-1 libqt4-opengl (>= 4:4.5.3) | 4:4.8.2-1 libqt4-qt3support (>= 4:4.5.3) | 4:4.8.2-1 libqt4-svg (>= 4:4.5.3) | 4:4.8.2-1 libqt4-xml (>= 4:4.5.3) | 4:4.8.2-1 libqtassistantclient4 (>= 4.6.3) | 4.6.3-4 libqtcore4 (>= 4:4.7.0~beta1) | 4:4.8.2-1 libqtexengine1 (>= 0.3) | 0.3-3 libqtgui4 (>= 4:4.6.1) | 4:4.8.2-1 libstdc++6 (>= 4.6) | 4.7.1-2 libtamuanova-0.2 (>= 0.2) | 0.2-2 zlib1g (>= 1:1.1.4) | 1:1.2.7.dfsg-13 python-qt4 | 4.9-2 python-sip (>= 4.9-1) | 4.13.3-2 python (>= 2.6.6-7~) | 2.7.3~rc2-1 Recommends (Version) | Installed ==================================-+-=========== qt-assistant-compat | qtiplot-doc | 0.9.8.8-5 Package's Suggests field is empty. -- Timo Dittmar University of California San Diego Center for Energy Research, EBU-II, Rm 561 9500 Gilman Dr. La Jolla, CA 92093-0417 USA office phone: +1 858 534 6337 From ftpmaster at ftp-master.debian.org Tue Jul 24 03:16:10 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 03:16:10 +0000 Subject: Processing of opencv_2.4.2+dfsg-0exp1_amd64.changes Message-ID: opencv_2.4.2+dfsg-0exp1_amd64.changes uploaded successfully to localhost along with the files: opencv_2.4.2+dfsg-0exp1.dsc opencv_2.4.2+dfsg.orig.tar.gz opencv_2.4.2+dfsg-0exp1.debian.tar.gz opencv-doc_2.4.2+dfsg-0exp1_all.deb libcv-dev_2.4.2+dfsg-0exp1_amd64.deb libcv2.4_2.4.2+dfsg-0exp1_all.deb libhighgui-dev_2.4.2+dfsg-0exp1_amd64.deb libhighgui2.4_2.4.2+dfsg-0exp1_all.deb libcvaux-dev_2.4.2+dfsg-0exp1_amd64.deb libcvaux2.4_2.4.2+dfsg-0exp1_all.deb libopencv-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-core-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-core2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-ml-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-ml2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-imgproc-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-imgproc2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-video-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-video2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-objdetect-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-objdetect2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-highgui-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-highgui2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-calib3d-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-calib3d2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-flann-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-flann2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-features2d-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-features2d2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-legacy-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-legacy2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-contrib-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-contrib2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-ts-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-ts2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-photo-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-photo2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-videostab-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-videostab2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-stitching-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-stitching2.4_2.4.2+dfsg-0exp1_amd64.deb python-opencv_2.4.2+dfsg-0exp1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 24 03:17:23 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 03:17:23 +0000 Subject: opencv_2.4.2+dfsg-0exp1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: libcv-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libcv-dev_2.4.2+dfsg-0exp1_amd64.deb libcv2.4_2.4.2+dfsg-0exp1_all.deb to main/o/opencv/libcv2.4_2.4.2+dfsg-0exp1_all.deb libcvaux-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libcvaux-dev_2.4.2+dfsg-0exp1_amd64.deb libcvaux2.4_2.4.2+dfsg-0exp1_all.deb to main/o/opencv/libcvaux2.4_2.4.2+dfsg-0exp1_all.deb libhighgui-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libhighgui-dev_2.4.2+dfsg-0exp1_amd64.deb libhighgui2.4_2.4.2+dfsg-0exp1_all.deb to main/o/opencv/libhighgui2.4_2.4.2+dfsg-0exp1_all.deb libopencv-calib3d-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-calib3d-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-calib3d2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-calib3d2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-contrib-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-contrib-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-contrib2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-contrib2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-core-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-core-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-core2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-core2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-features2d-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-features2d-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-features2d2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-features2d2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-flann-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-flann-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-flann2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-flann2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-highgui-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-highgui-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-highgui2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-highgui2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-imgproc-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-imgproc-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-imgproc2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-imgproc2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-legacy-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-legacy-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-legacy2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-legacy2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-ml-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-ml-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-ml2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-ml2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-objdetect-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-objdetect-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-objdetect2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-objdetect2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-photo-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-photo-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-photo2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-photo2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-stitching-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-stitching-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-stitching2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-stitching2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-ts-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-ts-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-ts2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-ts2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-video-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-video-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-video2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-video2.4_2.4.2+dfsg-0exp1_amd64.deb libopencv-videostab-dev_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-videostab-dev_2.4.2+dfsg-0exp1_amd64.deb libopencv-videostab2.4_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/libopencv-videostab2.4_2.4.2+dfsg-0exp1_amd64.deb opencv-doc_2.4.2+dfsg-0exp1_all.deb to main/o/opencv/opencv-doc_2.4.2+dfsg-0exp1_all.deb opencv_2.4.2+dfsg-0exp1.debian.tar.gz to main/o/opencv/opencv_2.4.2+dfsg-0exp1.debian.tar.gz opencv_2.4.2+dfsg-0exp1.dsc to main/o/opencv/opencv_2.4.2+dfsg-0exp1.dsc opencv_2.4.2+dfsg.orig.tar.gz to main/o/opencv/opencv_2.4.2+dfsg.orig.tar.gz python-opencv_2.4.2+dfsg-0exp1_amd64.deb to main/o/opencv/python-opencv_2.4.2+dfsg-0exp1_amd64.deb Changes: opencv (2.4.2+dfsg-0exp1) experimental; urgency=low . * New upstream release. * Update debian/control. - Changed Depends from libtiff4-dev to libtiff-dev. (Closes: #682238) - Support eigen2. Add libeigen2-dev to Build-Depends. * Update install file. Change path of samples and add python2. * Update debian/rules. - Remove chmod line. Removed build_all.sh. - Add -r for option of rm command. * Update patches/build-static-libs.patch Override entries for your package: libcv-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libcv2.4_2.4.2+dfsg-0exp1_all.deb - optional devel libcvaux-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libcvaux2.4_2.4.2+dfsg-0exp1_all.deb - optional devel libhighgui-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libhighgui2.4_2.4.2+dfsg-0exp1_all.deb - optional devel libopencv-calib3d-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-calib3d2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-contrib-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-contrib2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-core-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-core2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-features2d-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-features2d2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-flann-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-flann2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-highgui-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-highgui2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-imgproc-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-imgproc2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-legacy-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-legacy2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-ml-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-ml2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-objdetect-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-objdetect2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-photo-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-photo2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-stitching-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-stitching2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-ts-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-ts2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-video-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-video2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs libopencv-videostab-dev_2.4.2+dfsg-0exp1_amd64.deb - optional libdevel libopencv-videostab2.4_2.4.2+dfsg-0exp1_amd64.deb - optional libs opencv-doc_2.4.2+dfsg-0exp1_all.deb - optional doc opencv_2.4.2+dfsg-0exp1.dsc - source devel python-opencv_2.4.2+dfsg-0exp1_amd64.deb - optional python Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Closing bugs: 682238 Thank you for your contribution to Debian. From owner at bugs.debian.org Tue Jul 24 03:21:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 24 Jul 2012 03:21:06 +0000 Subject: Bug#682238: marked as done (opencv: Please Depend on unversioned libtiff-dev instead of libtiff4-dev) References: <20120720152024.23743.87091.reportbug@tambo> Message-ID: Your message dated Tue, 24 Jul 2012 03:17:23 +0000 with message-id and subject line Bug#682238: fixed in opencv 2.4.2+dfsg-0exp1 has caused the Debian Bug report #682238, regarding opencv: Please Depend on unversioned libtiff-dev instead of libtiff4-dev to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 682238: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682238 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Michael Terry Subject: opencv: Please Depend on unversioned libtiff-dev instead of libtiff4-dev Date: Fri, 20 Jul 2012 11:20:24 -0400 Size: 3292 URL: -------------- next part -------------- An embedded message was scrubbed... From: Nobuhiro Iwamatsu Subject: Bug#682238: fixed in opencv 2.4.2+dfsg-0exp1 Date: Tue, 24 Jul 2012 03:17:23 +0000 Size: 20602 URL: From lucas at lucas-nussbaum.net Tue Jul 24 09:40:20 2012 From: lucas at lucas-nussbaum.net (Lucas Nussbaum) Date: Tue, 24 Jul 2012 11:40:20 +0200 Subject: Bug#682642: code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Message-ID: <20120724094020.GA26474@xanadu.blop.info> Source: code-saturne Version: 2.1.7-1 Severity: serious Tags: wheezy sid User: debian-qa at lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: > make[3]: Entering directory `/?PKGBUILDDIR?/gui' > Making all in Base > make[4]: Entering directory `/?PKGBUILDDIR?/gui/Base' > /usr/bin/pyuic4 -o BrowserForm.py BrowserForm.ui > /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory > make[4]: *** [BrowserForm.py] Error 126 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/code-saturne_2.1.7-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. From lucas at lucas-nussbaum.net Tue Jul 24 09:43:42 2012 From: lucas at lucas-nussbaum.net (Lucas Nussbaum) Date: Tue, 24 Jul 2012 11:43:42 +0200 Subject: Bug#682650: feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY) Message-ID: <20120724094342.GA26908@xanadu.blop.info> Source: feel++ Version: 0.91.4-3 Severity: serious Tags: wheezy sid User: debian-qa at lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: > make[1]: Entering directory `/build/feel++-ulH7c2/feel++-0.91.4' > make[1]: Nothing to be done for `update-config'. > make[1]: Leaving directory `/build/feel++-ulH7c2/feel++-0.91.4' > cd obj-x86_64-linux-gnu && cmake /build/feel++-ulH7c2/feel++-0.91.4/. -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_C_COMPILER:FILEPATH="cc" -DCMAKE_CXX_COMPILER:FILEPATH="/usr/bin/g++-4.6" -DCMAKE_C_FLAGS=" -D_FORTIFY_SOURCE=2" -DCMAKE_CXX_FLAGS=" -D_FORTIFY_SOURCE=2" -DCMAKE_SKIP_RPATH=ON -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_CXX_COMPILER=/usr/bin/g++-4.6 -DCMAKE_BUILD_TYPE=Release -DCMAKE_CXX_FLAGS_RELEASE="-O2 -DNDEBUG -g0" -DPETSC_ARCH=linux-gnu-c-opt -DPETSC_DIR=/usr/lib/petscdir/3.2 -DPETSC_EXECUTABLE_RUNS=ON -DFEELPP_ENABLE_TRILINOS=OFF -DFEELPP_ENABLE_APPLICATIONS=OFF -DFEELPP_ENABLE_APPLICATIONS_CRB=ON -DFEELPP_ENABLE_BENCHMARKS=OFF -DFEELPP_ENABLE_TESTS=OFF -DFEELPP_ENABLE_EXAMPLES=OFF -DFEELPP_OPUS_ENABLE_EADS=ON -DBUILD_TESTING=OFF -DFEELPP_ENABLE_DOCUMENTATION=ON -DFEELPP_MINIMAL_CONFIGURATION=ON -DTRILINOS_LIB_NOXLAPACK= -DFEELPP_ENABLE_INSTANTIATION_MODE=OFF /build/feel++-ulH7c2/feel++-0.91.4/. > -- The C compiler identification is GNU 4.7.1 > -- The CXX compiler identification is GNU 4.6.3 > -- The Fortran compiler identification is GNU > -- Check for working C compiler: /usr/bin/cc > -- Check for working C compiler: /usr/bin/cc -- works > -- Detecting C compiler ABI info > -- Detecting C compiler ABI info - done > -- Check for working CXX compiler: /usr/bin/g++-4.6 > -- Check for working CXX compiler: /usr/bin/g++-4.6 -- works > -- Detecting CXX compiler ABI info > -- Detecting CXX compiler ABI info - done > -- Check for working Fortran compiler: /usr/bin/gfortran > -- Check for working Fortran compiler: /usr/bin/gfortran -- works > -- Detecting Fortran compiler ABI info > -- Detecting Fortran compiler ABI info - done > -- Checking whether /usr/bin/gfortran supports Fortran 90 > -- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes > -- Could NOT find Subversion (missing: Subversion_SVN_EXECUTABLE) > -- Could NOT find Git (missing: GIT_EXECUTABLE) > -- [feel++] Global flags: -std=c++0x -pedantic -ftemplate-depth-256 -Wno-inline -Wall -Wno-unused -Wno-sign-compare > -- [feel++] Debug flags: -std=c++0x -pedantic -g -ftemplate-depth-256 -Wno-inline > -- [feel++] Release flags: -std=c++0x -pedantic -g0 -O2 -DNDEBUG -ftemplate-depth-256 -finline-functions -Wno-inline > -- Looking for sys/types.h > -- Looking for sys/types.h - found > -- Looking for stdint.h > -- Looking for stdint.h - found > -- Looking for stddef.h > -- Looking for stddef.h - found > -- Check size of int > -- Check size of int - done > -- Check size of uint > -- Check size of uint - done > -- Check size of size_t > -- Check size of size_t - done > -- Check size of long > -- Check size of long - done > -- Check size of float > -- Check size of float - done > -- Check size of double > -- Check size of double - done > -- Check size of long double > -- Check size of long double - done > -- SIZE_INT=4 > -- SIZE_UINT=4 > -- SIZE_SIZE_T=8 > -- SIZE_LONG=8 > -- SIZE_FLOAT=4 > -- SIZE_DOUBLE=8 > -- SIZE_LONG_DOUBLE=16 > -- Try OpenMP C flag = [-fopenmp] > -- Performing Test OpenMP_FLAG_DETECTED > -- Performing Test OpenMP_FLAG_DETECTED - Success > -- Try OpenMP CXX flag = [-fopenmp] > -- Performing Test OpenMP_FLAG_DETECTED > -- Performing Test OpenMP_FLAG_DETECTED - Success > -- Found OpenMP: -fopenmp > -- Found MPI_C: /usr/lib/openmpi/lib/libmpi.so;/usr/lib/openmpi/lib/libopen-rte.so;/usr/lib/openmpi/lib/libopen-pal.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libnsl.so;/usr/lib/x86_64-linux-gnu/libutil.so;/usr/lib/x86_64-linux-gnu/libm.so;/usr/lib/x86_64-linux-gnu/libdl.so > -- Found MPI_CXX: /usr/lib/openmpi/lib/libmpi_cxx.so;/usr/lib/openmpi/lib/libmpi.so;/usr/lib/openmpi/lib/libopen-rte.so;/usr/lib/openmpi/lib/libopen-pal.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libnsl.so;/usr/lib/x86_64-linux-gnu/libutil.so;/usr/lib/x86_64-linux-gnu/libm.so;/usr/lib/x86_64-linux-gnu/libdl.so > -- Found MPI_Fortran: /usr/lib/openmpi/lib/libmpi_f90.so;/usr/lib/openmpi/lib/libmpi_f77.so;/usr/lib/openmpi/lib/libmpi.so;/usr/lib/openmpi/lib/libopen-rte.so;/usr/lib/openmpi/lib/libopen-pal.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libnsl.so;/usr/lib/x86_64-linux-gnu/libutil.so;/usr/lib/x86_64-linux-gnu/libm.so;/usr/lib/x86_64-linux-gnu/libdl.so > -- Looking for C++ include dlfcn.h > -- Looking for C++ include dlfcn.h - found > -- Looking for dlopen in dl > -- Looking for dlopen in dl - found > -- Found LibXml2: /usr/lib/x86_64-linux-gnu/libxml2.so (found version "2.8.0") > -- Looking for Fortran sgemm > -- Looking for Fortran sgemm - found > -- Looking for include file pthread.h > -- Looking for include file pthread.h - found > -- Looking for pthread_create > -- Looking for pthread_create - not found. > -- Looking for pthread_create in pthreads > -- Looking for pthread_create in pthreads - not found > -- Looking for pthread_create in pthread > -- Looking for pthread_create in pthread - found > -- Found Threads: TRUE > -- A library with BLAS API found. > -- Looking for Fortran cheev > -- Looking for Fortran cheev - found > -- A library with LAPACK API found. > -- Boost version: 1.49.0 > -- Found the following Boost libraries: > -- date_time > -- filesystem > -- system > -- program_options > -- unit_test_framework > -- signals > -- mpi > -- regex > -- serialization > -- Performing Test standard_math_library_linked_to_automatically > -- Performing Test standard_math_library_linked_to_automatically - Success > -- Standard libraries to link to explicitly: none > -- Performing Test COMPILER_SUPPORT_WNOVARIADICMACRO > -- Performing Test COMPILER_SUPPORT_WNOVARIADICMACRO - Success > -- Performing Test COMPILER_SUPPORT_WEXTRA > -- Performing Test COMPILER_SUPPORT_WEXTRA - Success > -- Performing Test COMPILER_SUPPORT_OPENMP > -- Performing Test COMPILER_SUPPORT_OPENMP - Success > -- METIS_INCLUDE_DIR-NOTFOUND > -- Found ANN: /usr/include/ANN > -- Looking for C++ include glpk.h > -- Looking for C++ include glpk.h - found > -- Found GLPK: /usr/include > -- Found LibXml2: /usr/lib/x86_64-linux-gnu/libxml2.so (found suitable version "2.8.0", required is "2.6.27") > -- Found PythonLibs: /usr/lib/libpython2.7.so (found version "2.7.3") > -- PythonLibs: /usr/include/python2.7 /usr/lib/libpython2.7.so > -- Metis: METIS_LIBRARY-NOTFOUND > -- ML: ML_LIBRARY-NOTFOUND > -- Mumps: /usr/lib/libdmumps.so /usr/lib/libmumps_common.so > -- Amd: /usr/lib/libamd.so > -- Umfpack: /usr/lib/libumfpack.so > -- petsc_lib_dir /usr/lib/petscdir/3.2/linux-gnu-c-opt/lib > -- Recognized PETSc install with single library for all packages > -- Performing Test MULTIPASS_TEST_1_petsc_works_minimal > -- Performing Test MULTIPASS_TEST_1_petsc_works_minimal - Failed > -- Performing Test MULTIPASS_TEST_2_petsc_works_allincludes > -- Performing Test MULTIPASS_TEST_2_petsc_works_allincludes - Failed > -- Unable to find library gfortran > -- Unable to find library gfortran > -- Unable to find library gfortran > -- Performing Test MULTIPASS_TEST_3_petsc_works_alllibraries > -- Performing Test MULTIPASS_TEST_3_petsc_works_alllibraries - Failed > -- Performing Test MULTIPASS_TEST_4_petsc_works_all > -- Performing Test MULTIPASS_TEST_4_petsc_works_all - Failed > -- PETSc could not be used, maybe the install is broken. > -- Found PETSc: /usr/lib/petscdir/3.2/include;/usr/lib/petscdir/3.2/linux-gnu-c-opt/include;/usr/include;/usr/include/spooles;/usr/include/scotch;/usr/include/suitesparse;/usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi > -- Looking for /usr/lib/slepcdir/3.2/include//slepc.h > -- Looking for /usr/lib/slepcdir/3.2/include//slepc.h - not found > -- Found SLEPC: /usr/lib/slepcdir/3.2 > -- SLepc found: /usr/lib/slepcdir/3.2 > -- Looking for C++ include pthread.h > -- Looking for C++ include pthread.h - found > -- Looking for include file stdlib.h > -- Looking for include file stdlib.h - found > -- Looking for include file stdarg.h > -- Looking for include file stdarg.h - found > -- Looking for include file string.h > -- Looking for include file string.h - found > -- Looking for include file float.h > -- Looking for include file float.h - found > -- Looking for memchr > -- Looking for memchr - found > -- Looking for free > -- Looking for free - found > -- Looking for include file ctype.h > -- Looking for include file ctype.h - found > -- Looking for include file sys/types.h > -- Looking for include file sys/types.h - found > -- Looking for include file sys/stat.h > -- Looking for include file sys/stat.h - found > -- Looking for include file memory.h > -- Looking for include file memory.h - found > -- Looking for include file strings.h > -- Looking for include file strings.h - found > -- Looking for include file inttypes.h > -- Looking for include file inttypes.h - found > -- Looking for include file stdint.h > -- Looking for include file stdint.h - found > -- Looking for include file unistd.h > -- Looking for include file unistd.h - found > -- Looking for include file stdbool.h > -- Looking for include file stdbool.h - found > -- Looking for include file regex.h > -- Looking for include file regex.h - found > -- Could NOT find OpenTURNS (missing: OpenTURNS_WRAPPER_DIR) > -- VTK not found. Set the VTK_DIR cmake cache entry to the directory containing VTKConfig.cmake. This is either the root of the build tree, or PREFIX/lib/vtk for an installation. For VTK 4.0, this is the location of UseVTK.cmake. This is either the root of the build tree or PREFIX/include/vtk for an installation. > -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY) > -- we work within Feel++ sources > -- Found PythonInterp: /usr/bin/python (found suitable version "2.7.3", required is "2.2") > -- Found Doxygen: /usr/bin/doxygen (found version "1.8.1.2") > -- Found DOXYFILE_IN: /build/feel++-ulH7c2/feel++-0.91.4/doc/api/Doxyfile.in > -- I could not find the latex2html command. > -- Could NOT find Subversion (missing: Subversion_SVN_EXECUTABLE) > -- doc tutorial: > -- apps: > -- ================================================================================ > -- FEELPP_VERSION_MAJOR : 0 > -- FEELPP_VERSION_MINOR : 91 > -- FEELPP_VERSION_MICRO : 4 > -- FEELPP_REVISON : 0 > -- FEELPP_BUILDID : 0 > -- > -- Feel++ Modules : > -- Documentation: ON > -- Testsuite: OFF > -- Applications: OFF > -- Examples: OFF > -- Benchmarks: OFF > -- Research: OFF > -- > -- Feel++ Configuration: > -- CMAKE_BUILD_TYPE: Release > -- CMAKE_CXX_COMPILER: /usr/bin/g++-4.6 > -- CMAKE_CXX_FLAGS: -std=c++0x -pedantic -ftemplate-depth-256 -Wno-inline -std=c++0x > -- CMAKE_CXX_FLAGS_RELEASE: -std=c++0x -pedantic -g0 -O2 -DNDEBUG -ftemplate-depth-256 -finline-functions -Wno-inline -std=c++0x > -- CMAKE_CXX_FLAGS_DEBUG: -std=c++0x -pedantic -g -ftemplate-depth-256 -Wno-inline -std=c++0x > -- > -- FEELPP_ENABLE_SVN: OFF > -- FEELPP_MESH_MAX_ORDER: 1 > -- FEELPP_INSTANTIATION_MODE: > -- FEELPP_ENABLED_OPTIONS: Mpi ANN GLPK Python PETSc SLEPc > -- ================================================================================ > -- Some things you can do now with Feel++: > -- ================================================================================ > -- Command | Description > -- ===============|================================================================ > -- make install | Install to /usr. To change that: > -- | cmake . -DCMAKE_INSTALL_PREFIX=yourpath > -- | Feel++ headers will then be installed to: > -- | include/feel > -- make doc | Generate the manual applications, manual and the API > -- | documentation, requires Doxygen & LaTeX > -- make examples | Generate the examples > -- make benchmarks| Generate the benchmarks(Warning: takes a long time!) > -- make check | Build and run the unit-tests. > -- ================================================================================ > -- > CMake Error: The following variables are used in this project, but they are set to NOTFOUND. > Please set them or make sure they are set and tested correctly in the CMake files: > GMSH_INCLUDE_DIR (ADVANCED) > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4 > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/data > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/feel > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/feel/feelopt > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/api > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > used as include directory in directory /build/feel++-ulH7c2/feel++-0.91.4/doc/manual/tutorial > > -- Configuring incomplete, errors occurred! > make: *** [obj-x86_64-linux-gnu/CMakeCache.txt] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/feel++_0.91.4-3_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. From lucas at lucas-nussbaum.net Tue Jul 24 09:40:49 2012 From: lucas at lucas-nussbaum.net (Lucas Nussbaum) Date: Tue, 24 Jul 2012 11:40:49 +0200 Subject: Bug#682649: yade: FTBFS: sh: 1: pyuic4: not found Message-ID: <20120724094049.GA26692@xanadu.blop.info> Source: yade Version: 0.80.1-2 Severity: serious Tags: wheezy sid User: debian-qa at lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: > make[1]: Entering directory `/?PKGBUILDDIR?' > # remove the profile, if existing, to have clean config > rm -f scons.* > #Output an information about available memory and CPU > cat /proc/meminfo > MemTotal: 17915740 kB > MemFree: 12192584 kB > Buffers: 39032 kB > Cached: 4799812 kB > SwapCached: 0 kB > Active: 1919436 kB > Inactive: 2969456 kB > Active(anon): 1720660 kB > Inactive(anon): 2902276 kB > Active(file): 198776 kB > Inactive(file): 67180 kB > Unevictable: 0 kB > Mlocked: 0 kB > SwapTotal: 423966712 kB > SwapFree: 423966712 kB > Dirty: 480 kB > Writeback: 0 kB > AnonPages: 50032 kB > Mapped: 14800 kB > Shmem: 4572888 kB > Slab: 119980 kB > SReclaimable: 51660 kB > SUnreclaim: 68320 kB > KernelStack: 704 kB > PageTables: 4212 kB > NFS_Unstable: 0 kB > Bounce: 0 kB > WritebackTmp: 0 kB > CommitLimit: 432924580 kB > Committed_AS: 4776204 kB > VmallocTotal: 34359738367 kB > VmallocUsed: 270552 kB > VmallocChunk: 34359467200 kB > HardwareCorrupted: 0 kB > HugePages_Total: 0 > HugePages_Free: 0 > HugePages_Rsvd: 0 > HugePages_Surp: 0 > Hugepagesize: 2048 kB > DirectMap4k: 17920000 kB > DirectMap2M: 0 kB > cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 26 > model name : Intel(R) Xeon(R) CPU X5550 @ 2.67GHz > stepping : 5 > cpu MHz : 2666.760 > cache size : 8192 KB > fpu : yes > fpu_exception : yes > cpuid level : 11 > wp : yes > flags : fpu de tsc msr pae cx8 sep cmov pat clflush mmx fxsr sse sse2 ss ht syscall nx lm constant_tsc rep_good nonstop_tsc aperfmperf pni ssse3 cx16 sse4_1 sse4_2 popcnt hypervisor lahf_lm ida > bogomips : 5333.52 > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 26 > model name : Intel(R) Xeon(R) CPU X5550 @ 2.67GHz > stepping : 5 > cpu MHz : 2666.760 > cache size : 8192 KB > fpu : yes > fpu_exception : yes > cpuid level : 11 > wp : yes > flags : fpu de tsc msr pae cx8 sep cmov pat clflush mmx fxsr sse sse2 ss ht syscall nx lm constant_tsc rep_good nonstop_tsc aperfmperf pni ssse3 cx16 sse4_1 sse4_2 popcnt hypervisor lahf_lm ida > bogomips : 5333.52 > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: > > #optimized build > export MPLCONFIGDIR=/?PKGBUILDDIR?/debian/matplotlib HOME=/?PKGBUILDDIR?/debian/matplotlib; NO_SCONS_GET_RECENT= scons profile=deb buildPrefix=debian runtimePREFIX=/usr version='' brief=0 chunkSize=2 features=vtk,gts,opengl,qt4,openmp,cgal PREFIX=/?PKGBUILDDIR?/debian/inst variant='' CXXFLAGS='-Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security' optimize=1 -j1 march= debug=0 > scons: Reading SConscript files ... > @@@ Using profile deb (scons.profile-deb) @@@ > Eigen 3 math library will be used > Setting number of jobs (using DEB_BUILD_OPTIONS) to `10' > Yade version is `' (0.80.1), installed files will be suffixed with `'. > All intermediary files will be in `/?PKGBUILDDIR?/debian/build'. > Mkdir("/?PKGBUILDDIR?/debian/build") > Checking whether c++ compiler "g++" works...yes > Finding libstdc++ library... (cached) /usr/lib/x86_64-linux-gnu/libstdc++.so.6 > Checking for pthread_exit(NULL) in C library pthread... yes > Checking for Python development files... ok > Checking for C++ header file numpy/ndarrayobject.h... yes > Checking for required python modules... (cached) all ok > Checking boost libraries... all ok > Checking for C++ header file boost/foreach.hpp... yes > Checking for C++ header file Eigen/Core... yes > Checking for C++ header file loki/NullType.h... yes > Checking for glutGetModifiers() in C++ library glut... yes > Checking for QGLViewer() in C++ library qglviewer-qt4... yes > Checking for vtkInstantiator::New() in C++ library vtkCommon... yes > Checking for gts_object_class() in C++ library gts... yes > Checking for CGAL::Exact_predicates_inexact_constructions_kernel::Point_3() in C++ library CGAL... yes > Rebuilding combined files, since the md5 has changed. > scons: done reading SConscript files. > scons: Building targets ... > cp -f debian/build/core/main/main.py debian/inst/bin/yade > Chmod("/?PKGBUILDDIR?/debian/inst/bin/yade", 0755) > cp -f debian/build/core/main/yade-batch debian/inst/bin/yade-batch > Chmod("/?PKGBUILDDIR?/debian/inst/bin/yade-batch", 0755) > gcc -o debian/build/py/3rd-party/pygts-0.3.1/cleanup.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/cleanup.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/face.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/face.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/edge.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/edge.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/object.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/object.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/point.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/point.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/pygts.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/pygts.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/segment.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/segment.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/surface.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/surface.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/triangle.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/triangle.c > gcc -o debian/build/py/3rd-party/pygts-0.3.1/vertex.os -c -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -DPYGTS_HAS_NUMPY -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/3rd-party/pygts-0.3.1/vertex.c > > debian/build/lib/yade-support.cpp > g++ -o debian/build/lib/yade-support.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -frounding-math -ansi -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/lib/yade-support.cpp > In file included from /?PKGBUILDDIR?/lib/opengl/GLUtils.hpp:7:0, > from /?PKGBUILDDIR?/lib/opengl/GLUtils.cpp:1, > from debian/build/lib/yade-support.cpp:14: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > g++ -o debian/build/lib/libyade-support.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -pthread -Bsymbolic-function -ansi -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/lib/yade-support.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -ldl -lm -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lgomp -lglut -lGL -lGLU > cp -f debian/build/lib/libyade-support.so debian/inst/lib/yade/lib/libyade-support.so > gcc -o debian/build/py/_gts.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/3rd-party/pygts-0.3.1/cleanup.os debian/build/py/3rd-party/pygts-0.3.1/face.os debian/build/py/3rd-party/pygts-0.3.1/edge.os debian/build/py/3rd-party/pygts-0.3.1/object.os debian/build/py/3rd-party/pygts-0.3.1/point.os debian/build/py/3rd-party/pygts-0.3.1/pygts.os debian/build/py/3rd-party/pygts-0.3.1/segment.os debian/build/py/3rd-party/pygts-0.3.1/surface.os debian/build/py/3rd-party/pygts-0.3.1/triangle.os debian/build/py/3rd-party/pygts-0.3.1/vertex.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp > cp -f debian/build/py/_gts.so debian/inst/lib/yade/py/gts/_gts.so > ln -s -f ../py/gts/_gts.so debian/inst/lib/yade/lib/lib_gts__python-module.so > > debian/build/core/core.cpp > g++ -o debian/build/core/core.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/core/core.cpp > g++ -o debian/build/core/libcore.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/core/core.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lyade-support -lrt > cp -f debian/build/core/libcore.so debian/inst/lib/yade/lib/libcore.so > > debian/build/plugins0.cpp > g++ -o debian/build/plugins0.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins0.cpp > > debian/build/plugins2.cpp > g++ -o debian/build/plugins2.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins2.cpp > > debian/build/plugins1.cpp > g++ -o debian/build/plugins1.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins1.cpp > > debian/build/plugins3.cpp > g++ -o debian/build/plugins3.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins3.cpp > > debian/build/plugins4.cpp > g++ -o debian/build/plugins4.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins4.cpp > > debian/build/plugins5.cpp > g++ -o debian/build/plugins5.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins5.cpp > In file included from /?PKGBUILDDIR?/pkg/common/Gl1_Sphere.cpp:14:0, > from debian/build/plugins5.cpp:2: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins6.cpp > g++ -o debian/build/plugins6.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins6.cpp > > debian/build/plugins7.cpp > g++ -o debian/build/plugins7.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins7.cpp > > debian/build/plugins8.cpp > g++ -o debian/build/plugins8.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins8.cpp > In file included from /?PKGBUILDDIR?/pkg/dem/Dem3DofGeom_SphereSphere.cpp:102:0, > from debian/build/plugins8.cpp:2: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins9.cpp > g++ -o debian/build/plugins9.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins9.cpp > In file included from /?PKGBUILDDIR?/pkg/dem/ConcretePM.cpp:351:0, > from debian/build/plugins9.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins10.cpp > g++ -o debian/build/plugins10.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins10.cpp > > debian/build/plugins11.cpp > g++ -o debian/build/plugins11.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins11.cpp > > debian/build/plugins12.cpp > g++ -o debian/build/plugins12.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins12.cpp > > debian/build/plugins13.cpp > g++ -o debian/build/plugins13.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins13.cpp > > debian/build/plugins14.cpp > g++ -o debian/build/plugins14.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins14.cpp > > debian/build/plugins15.cpp > g++ -o debian/build/plugins15.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins15.cpp > In file included from /?PKGBUILDDIR?/pkg/dem/L3Geom.cpp:10:0, > from debian/build/plugins15.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins16.cpp > g++ -o debian/build/plugins16.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins16.cpp > > debian/build/plugins17.cpp > g++ -o debian/build/plugins17.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins17.cpp > > debian/build/plugins18.cpp > g++ -o debian/build/plugins18.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins18.cpp > > debian/build/plugins19.cpp > g++ -o debian/build/plugins19.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins19.cpp > In file included from debian/build/include/yade/pkg/common/Gl1_NormPhys.hpp:3:0, > from /?PKGBUILDDIR?/pkg/dem/Shop.cpp:46, > from debian/build/plugins19.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins20.cpp > g++ -o debian/build/plugins20.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins20.cpp > In file included from /?PKGBUILDDIR?/pkg/common/Gl1_Box.cpp:13:0, > from debian/build/plugins20.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins21.cpp > g++ -o debian/build/plugins21.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins21.cpp > > debian/build/plugins22.cpp > g++ -o debian/build/plugins22.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins22.cpp > > debian/build/plugins23.cpp > g++ -o debian/build/plugins23.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins23.cpp > In file included from /usr/include/c++/4.7/backward/strstream:52:0, > from /usr/include/vtk-5.8/vtkIOStream.h:112, > from /usr/include/vtk-5.8/vtkSystemIncludes.h:40, > from /usr/include/vtk-5.8/vtkIndent.h:24, > from /usr/include/vtk-5.8/vtkObjectBase.h:43, > from /usr/include/vtk-5.8/vtkObject.h:41, > from /usr/include/vtk-5.8/vtkCellArray.h:35, > from /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:7, > from debian/build/plugins23.cpp:1: > /usr/include/c++/4.7/backward/backward_warning.h:33:2: warning: #warning This file includes at least one deprecated or antiquated header which may be removed without further notice at a future date. Please use a non-deprecated interface with equivalent functionality instead. For a listing of replacement headers and interfaces, consult the file backward_warning.h. To disable this warning use -Wno-deprecated. [-Wcpp] > In file included from debian/build/plugins23.cpp:1:0: > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp: In member function 'virtual void VTKRecorder::action()': > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:258:40: warning: narrowing conversion of 'std::abs(((double)((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& phys->NormShearPhys::shearForce)))->Eigen::DenseCoeffsBase::operator[] >(0l)))' from 'double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:258:65: warning: narrowing conversion of 'std::abs(((double)((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& phys->NormShearPhys::shearForce)))->Eigen::DenseCoeffsBase::operator[] >(1l)))' from 'double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:258:90: warning: narrowing conversion of 'std::abs(((double)((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& phys->NormShearPhys::shearForce)))->Eigen::DenseCoeffsBase::operator[] >(2l)))' from 'double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:304:46: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& color)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:304:46: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& color)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:304:46: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& color)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:309:42: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& vel)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:309:42: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& vel)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:309:42: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& vel)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:314:52: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& angVel)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:314:52: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& angVel)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:314:52: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& angVel)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:321:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& stress)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:321:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& stress)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:321:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& stress)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:322:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& shear)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:322:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& shear)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:322:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& shear)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:23: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:31: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:39: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:47: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:55: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:63: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:71: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:79: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:87: warning: left operand of comma operator has no effect [-Wunused-value] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 0l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 1l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 2l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 0l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 1l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 2l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 0l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 1l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:332:89: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& ss)))->Eigen::DenseCoeffsBase::operator[] >((0, 2l))' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:361:46: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& color)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:361:46: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& color)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:361:46: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& color)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:366:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& stress)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:366:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& stress)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/dem/VTKRecorder.cpp:366:51: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& stress)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'float' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins24.cpp > g++ -o debian/build/plugins24.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins24.cpp > > debian/build/plugins25.cpp > g++ -o debian/build/plugins25.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins25.cpp > In file included from /?PKGBUILDDIR?/pkg/dem/Tetra.cpp:415:0, > from debian/build/plugins25.cpp:2: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins26.cpp > g++ -o debian/build/plugins26.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins26.cpp > > debian/build/plugins27.cpp > g++ -o debian/build/plugins27.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins27.cpp > > debian/build/plugins28.cpp > g++ -o debian/build/plugins28.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins28.cpp > > debian/build/plugins29.cpp > g++ -o debian/build/plugins29.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins29.cpp > > debian/build/plugins30.cpp > g++ -o debian/build/plugins30.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins30.cpp > > debian/build/plugins31.cpp > g++ -o debian/build/plugins31.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins31.cpp > > debian/build/plugins32.cpp > g++ -o debian/build/plugins32.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins32.cpp > In file included from debian/build/plugins32.cpp:1:0: > /?PKGBUILDDIR?/pkg/dem/MicroMacroAnalyser.cpp: In member function 'CGT::TriaxialState& MicroMacroAnalyser::makeState(unsigned int, const char*)': > /?PKGBUILDDIR?/pkg/dem/MicroMacroAnalyser.cpp:116:7: warning: variable 'fictiousFirst' set but not used [-Wunused-but-set-variable] > > debian/build/plugins33.cpp > g++ -o debian/build/plugins33.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins33.cpp > > debian/build/plugins34.cpp > g++ -o debian/build/plugins34.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins34.cpp > > debian/build/plugins35.cpp > g++ -o debian/build/plugins35.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins35.cpp > > debian/build/plugins36.cpp > g++ -o debian/build/plugins36.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins36.cpp > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from debian/build/include/yade/pkg/dem/DomainLimiter.hpp:70, > from /?PKGBUILDDIR?/pkg/dem/DomainLimiter.cpp:1, > from debian/build/plugins36.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > In file included from debian/build/plugins36.cpp:2:0: > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp: In member function 'void OpenGLRenderer::render(const boost::shared_ptr&, Body::id_t)': > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:181:65: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::lightPos)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:181:65: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::lightPos)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:181:65: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::lightPos)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:184:86: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::lightColor)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:184:86: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::lightColor)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:184:86: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::lightColor)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:191:69: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::light2Pos)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:191:69: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::light2Pos)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:191:69: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::light2Pos)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:194:90: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::light2Color)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:194:90: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::light2Color)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /?PKGBUILDDIR?/pkg/common/OpenGLRenderer.cpp:194:90: warning: narrowing conversion of '((Eigen::DenseCoeffsBase, 1>*)((Eigen::DenseBase >*)(&((OpenGLRenderer*)this)->OpenGLRenderer::light2Color)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'Eigen::DenseCoeffsBase, 1>::Scalar {aka double}' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins37.cpp > g++ -o debian/build/plugins37.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins37.cpp > > debian/build/plugins38.cpp > g++ -o debian/build/plugins38.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins38.cpp > > debian/build/plugins39.cpp > g++ -o debian/build/plugins39.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins39.cpp > In file included from /?PKGBUILDDIR?/pkg/common/Wall.cpp:26:0, > from debian/build/plugins39.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins40.cpp > g++ -o debian/build/plugins40.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins40.cpp > > debian/build/plugins41.cpp > g++ -o debian/build/plugins41.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins41.cpp > > debian/build/plugins42.cpp > g++ -o debian/build/plugins42.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins42.cpp > In file included from /?PKGBUILDDIR?/pkg/dem/Dem3DofGeom_WallSphere.cpp:78:0, > from debian/build/plugins42.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins43.cpp > g++ -o debian/build/plugins43.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins43.cpp > > debian/build/plugins44.cpp > g++ -o debian/build/plugins44.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins44.cpp > > debian/build/plugins45.cpp > g++ -o debian/build/plugins45.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins45.cpp > > debian/build/plugins46.cpp > g++ -o debian/build/plugins46.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins46.cpp > In file included from /?PKGBUILDDIR?/pkg/common/Gl1_Facet.cpp:13:0, > from debian/build/plugins46.cpp:2: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins47.cpp > g++ -o debian/build/plugins47.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins47.cpp > > debian/build/plugins48.cpp > g++ -o debian/build/plugins48.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins48.cpp > > debian/build/plugins49.cpp > g++ -o debian/build/plugins49.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins49.cpp > > debian/build/plugins50.cpp > g++ -o debian/build/plugins50.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins50.cpp > > debian/build/plugins51.cpp > g++ -o debian/build/plugins51.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins51.cpp > In file included from /?PKGBUILDDIR?/pkg/dem/Dem3DofGeom_FacetSphere.cpp:180:0, > from debian/build/plugins51.cpp:2: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > > debian/build/plugins52.cpp > g++ -o debian/build/plugins52.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins52.cpp > > debian/build/plugins53.cpp > g++ -o debian/build/plugins53.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins53.cpp > > debian/build/plugins54.cpp > g++ -o debian/build/plugins54.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/plugins54.cpp > In file included from /?PKGBUILDDIR?/pkg/common/Gl1_Aabb.cpp:12:0, > from debian/build/plugins54.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > g++ -o debian/build/libplugins.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/plugins0.os debian/build/plugins2.os debian/build/plugins1.os debian/build/plugins3.os debian/build/plugins4.os debian/build/plugins5.os debian/build/plugins6.os debian/build/plugins7.os debian/build/plugins8.os debian/build/plugins9.os debian/build/plugins10.os debian/build/plugins11.os debian/build/plugins12.os debian/build/plugins13.os debian/build/plugins14.os debian/build/plugins15.os debian/build/plugins16.os debian/build/plugins17.os debian/build/plugins18.os debian/build/plugins19.os debian/build/plugins20.os debian/build/plugins21.os debian/build/plugins22.os debian/build/plugins23.os debian/build/plugins24.os debian/build/plugins25.os debian/build/plugins26.os debian/build/plugins27.os debian/build/plugins28.os debian/build/plugins29.os debian/build/plugins30.os debian/build/plugins31.os debian/build/plugins32.os debian/build/plugins33.os debian/build/plugins34.os debian/build/plugins35.os debian/build/plugins36.os debian/build/plugins37.os debian/build/plugins38.os debian/build/plugins39.os debian/build/plugins40.os debian/build/plugins41.os debian/build/plugins42.os debian/build/plugins43.os debian/build/plugins44.os debian/build/plugins45.os debian/build/plugins46.os debian/build/plugins47.os debian/build/plugins48.os debian/build/plugins49.os debian/build/plugins50.os debian/build/plugins51.os debian/build/plugins52.os debian/build/plugins53.os debian/build/plugins54.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lyade-support -lcore > cp -f debian/build/libplugins.so debian/inst/lib/yade/plugins/libplugins.so > cp -f py/3rd-party/pygts-0.3.1/__init__.py debian/inst/lib/yade/py/gts/__init__.py > cp -f py/3rd-party/pygts-0.3.1/pygts.py debian/inst/lib/yade/py/gts/pygts.py > g++ -o debian/build/py/mathWrap/miniEigen.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -Idebian/build/lib -Ilib py/mathWrap/miniEigen.cpp > g++ -o debian/build/py/miniEigen.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/mathWrap/miniEigen.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lcore > cp -f debian/build/py/miniEigen.so debian/inst/lib/yade/py/miniEigen.so > cp -f py/3rd-party/mtTkinter-0.3/mtTkinter.py debian/inst/lib/yade/py/mtTkinter.py > g++ -o debian/build/py/WeightedAverage2d.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/WeightedAverage2d.cpp > g++ -o debian/build/py/WeightedAverage2d.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/WeightedAverage2d.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp > cp -f debian/build/py/WeightedAverage2d.so debian/inst/lib/yade/py/yade/WeightedAverage2d.so > cp -f debian/build/py/__init__.py debian/inst/lib/yade/py/yade/__init__.py > g++ -o debian/build/py/wrapper/customConverters.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/wrapper/customConverters.cpp > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from py/wrapper/customConverters.cpp:42: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > g++ -o debian/build/py/_customConverters.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/wrapper/customConverters.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lcore -lyade-support -lplugins > cp -f debian/build/py/_customConverters.so debian/inst/lib/yade/py/yade/_customConverters.so > g++ -o debian/build/py/_eudoxos.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/_eudoxos.cpp > In file included from /usr/include/c++/4.7/backward/strstream:52:0, > from /usr/include/vtk-5.8/vtkIOStream.h:112, > from /usr/include/vtk-5.8/vtkSystemIncludes.h:40, > from /usr/include/vtk-5.8/vtkIndent.h:24, > from /usr/include/vtk-5.8/vtkObjectBase.h:43, > from /usr/include/vtk-5.8/vtkObject.h:41, > from /usr/include/vtk-5.8/vtkLocator.h:53, > from /usr/include/vtk-5.8/vtkAbstractPointLocator.h:27, > from /usr/include/vtk-5.8/vtkIncrementalPointLocator.h:42, > from /usr/include/vtk-5.8/vtkPointLocator.h:39, > from py/_eudoxos.cpp:13: > /usr/include/c++/4.7/backward/backward_warning.h:33:2: warning: #warning This file includes at least one deprecated or antiquated header which may be removed without further notice at a future date. Please use a non-deprecated interface with equivalent functionality instead. For a listing of replacement headers and interfaces, consult the file backward_warning.h. To disable this warning use -Wno-deprecated. [-Wcpp] > g++ -o debian/build/py/_eudoxos.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/_eudoxos.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lcore -lyade-support -lplugins > cp -f debian/build/py/_eudoxos.so debian/inst/lib/yade/py/yade/_eudoxos.so > cp -f py/_extraDocs.py debian/inst/lib/yade/py/yade/_extraDocs.py > g++ -o debian/build/py/pack/_packObb.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/pack/_packObb.cpp > g++ -o debian/build/py/_packObb.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/pack/_packObb.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp > cp -f debian/build/py/_packObb.so debian/inst/lib/yade/py/yade/_packObb.so > g++ -o debian/build/py/pack/_packPredicates.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/pack/_packPredicates.cpp > g++ -o debian/build/py/_packPredicates.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/pack/_packPredicates.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -l_gts__python-module > cp -f debian/build/py/_packPredicates.so debian/inst/lib/yade/py/yade/_packPredicates.so > > debian/build/py/packSpherePadder.cpp > g++ -o debian/build/py/packSpherePadder.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/py/packSpherePadder.cpp > g++ -o debian/build/py/_packSpherePadder.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/packSpherePadder.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lcore -lyade-support -lplugins > cp -f debian/build/py/_packSpherePadder.so debian/inst/lib/yade/py/yade/_packSpherePadder.so > g++ -o debian/build/py/pack/_packSpheres.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/pack/_packSpheres.cpp > g++ -o debian/build/py/_packSpheres.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/pack/_packSpheres.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lcore -lyade-support -lplugins > cp -f debian/build/py/_packSpheres.so debian/inst/lib/yade/py/yade/_packSpheres.so > g++ -o debian/build/py/_utils.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include py/_utils.cpp > g++ -o debian/build/py/_utils.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/py/_utils.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lcore -lyade-support -lplugins > cp -f debian/build/py/_utils.so debian/inst/lib/yade/py/yade/_utils.so > cp -f py/bodiesHandling.py debian/inst/lib/yade/py/yade/bodiesHandling.py > g++ -o debian/build/core/main/pyboot.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include core/main/pyboot.cpp > g++ -o debian/build/core/boot.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib debian/build/core/main/pyboot.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lyade-support -lcore > cp -f debian/build/core/boot.so debian/inst/lib/yade/py/yade/boot.so > cp -f debian/build/py/config.py debian/inst/lib/yade/py/yade/config.py > cp -f py/eudoxos.py debian/inst/lib/yade/py/yade/eudoxos.py > cp -f py/export.py debian/inst/lib/yade/py/yade/export.py > cp -f py/geom.py debian/inst/lib/yade/py/yade/geom.py > cp -f py/linterpolation.py debian/inst/lib/yade/py/yade/linterpolation.py > cp -f py/manpage.py debian/inst/lib/yade/py/yade/manpage.py > cp -f py/pack/pack.py debian/inst/lib/yade/py/yade/pack.py > cp -f py/params.py debian/inst/lib/yade/py/yade/params.py > cp -f py/plot.py debian/inst/lib/yade/py/yade/plot.py > cp -f py/post2d.py debian/inst/lib/yade/py/yade/post2d.py > cp -f gui/qt4/Inspector.py debian/inst/lib/yade/py/yade/qt/Inspector.py > cp -f gui/qt4/SerializableEditor.py debian/inst/lib/yade/py/yade/qt/SerializableEditor.py > g++ -o debian/build/gui/qt4/GLViewer.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include gui/qt4/GLViewer.cpp > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from gui/qt4/GLViewer.hpp:6, > from gui/qt4/GLViewer.cpp:11: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > g++ -o debian/build/gui/qt4/OpenGLManager.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include gui/qt4/OpenGLManager.cpp > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from gui/qt4/GLViewer.hpp:6, > from gui/qt4/OpenGLManager.hpp:3, > from gui/qt4/OpenGLManager.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > g++ -o debian/build/gui/qt4/_GLViewer.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include gui/qt4/_GLViewer.cpp > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from gui/qt4/GLViewer.hpp:6, > from gui/qt4/_GLViewer.cpp:1: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /usr/share/qt4/bin/moc -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -o debian/build/gui/qt4/moc_GLViewer.cc gui/qt4/GLViewer.hpp > g++ -o debian/build/gui/qt4/moc_GLViewer.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/gui/qt4/moc_GLViewer.cc > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from debian/build/gui/qt4/../../../../gui/qt4/GLViewer.hpp:6, > from debian/build/gui/qt4/moc_GLViewer.cc:10: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > /usr/share/qt4/bin/moc -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -o debian/build/gui/qt4/moc_OpenGLManager.cc gui/qt4/OpenGLManager.hpp > g++ -o debian/build/gui/qt4/moc_OpenGLManager.os -c -pipe -Wall -Wall -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -frounding-math -fopenmp -O3 -pthread -fPIC -DQT_GUI_LIB -DQT_CORE_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_SHARED -DPYGTS_HAS_NUMPY -DYADE_CGAL -DYADE_GTS -DYADE_OPENGL -DYADE_OPENMP -DYADE_QT4 -DYADE_VTK -DYADE_OPENMP -DYADE_CAST=static_cast -DYADE_PTR_CAST=static_pointer_cast -DNDEBUG -I/usr/include/vtk-5.0 -I/usr/include/vtk-5.2 -I/usr/include/vtk-5.4 -I/usr/include/vtk-5.6 -I/usr/include/vtk-5.8 -I/usr/include/vtk -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/eigen3 -Idebian/build/include -Iinclude -I/usr/include/python2.7 -I/usr/include/qt4 -I/usr/include/qt4/QtCore -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include debian/build/gui/qt4/moc_OpenGLManager.cc > In file included from debian/build/include/yade/pkg/common/OpenGLRenderer.hpp:8:0, > from debian/build/gui/qt4/../../../../gui/qt4/GLViewer.hpp:6, > from debian/build/gui/qt4/../../../../gui/qt4/OpenGLManager.hpp:3, > from debian/build/gui/qt4/moc_OpenGLManager.cc:10: > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp: In function 'void glMaterialv(GLenum, GLenum, Type) [with Type = Eigen::Matrix; GLenum = unsigned int]': > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(0l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(1l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > debian/build/include/yade/lib/opengl/OpenGLWrapper.hpp:197:154: warning: narrowing conversion of '((const Eigen::DenseCoeffsBase, 0>*)((const Eigen::DenseBase >*)(& params)))->Eigen::DenseCoeffsBase::operator[] >(2l)' from 'const double' to 'const GLfloat {aka const float}' inside { } is ill-formed in C++11 [-Wnarrowing] > g++ -o debian/build/gui/_GLViewer.so -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions -L. -lpython2.7 -pthread -Wl,--export-dynamic -shared -rdynamic -Wl,-rpath=\$ORIGIN/../extra -Wl,-rpath=\$ORIGIN/../gui -Wl,-rpath=\$ORIGIN/../lib -Wl,-rpath=\$ORIGIN/../py -Wl,-rpath=\$ORIGIN/../plugins -Wl,-rpath=\$ORIGIN/../../extra -Wl,-rpath=\$ORIGIN/../../gui -Wl,-rpath=\$ORIGIN/../../lib -Wl,-rpath=\$ORIGIN/../../py -Wl,-rpath=\$ORIGIN/../../plugins -Wl,-rpath=\$ORIGIN/../lib/yade/lib -Wl,-rpath=\$ORIGIN/../../../gui debian/build/gui/qt4/GLViewer.os debian/build/gui/qt4/OpenGLManager.os debian/build/gui/qt4/_GLViewer.os debian/build/gui/qt4/moc_GLViewer.os debian/build/gui/qt4/moc_OpenGLManager.os -Ldebian/inst/lib/yade/extra -Ldebian/inst/lib/yade/gui -Ldebian/inst/lib/yade/lib -Ldebian/inst/lib/yade/py -Ldebian/inst/lib/yade/plugins -lpthread -lpthread -ldl -lutil -lboost_system -lboost_thread -lboost_date_time -lboost_filesystem -lboost_iostreams -lboost_regex -lboost_serialization -lboost_program_options -lboost_python -lglut -lQtXml -lQtOpenGL -lQtGui -lQtCore -lqglviewer-qt4 -lvtkCommon -lvtkHybrid -lvtkFiltering -lvtkRendering -lvtkIO -lvtkexoIIc -lvtkParallel -lvtkGraphics -lvtkverdict -lvtkImaging -lvtkftgl -lvtkDICOMParser -lvtkmetaio -lgts -lm -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0 -lgts -lCGAL -lgmpxx -lgmp -lyade-support -lgomp -lqglviewer-qt4 -lcore -lyade-support -lplugins > cp -f debian/build/gui/_GLViewer.so debian/inst/lib/yade/py/yade/qt/_GLViewer.so > cp -f gui/qt4/__init__.py debian/inst/lib/yade/py/yade/qt/__init__.py > pyrcc4 -o /?PKGBUILDDIR?/debian/build/gui/qt4/img_rc.py gui/qt4/img.qrc > cp -f debian/build/gui/qt4/img_rc.py debian/inst/lib/yade/py/yade/qt/img_rc.py > pyuic4 -o /?PKGBUILDDIR?/debian/build/gui/qt4/ui_controller.py gui/qt4/controller.ui > sh: 1: pyuic4: not found > scons: *** [debian/build/gui/qt4/ui_controller.py] Error 127 > scons: building terminated because of errors. > make[1]: *** [override_dh_auto_build-arch] Error 2 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/yade_0.80.1-2_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. From ftpmaster at ftp-master.debian.org Tue Jul 24 14:46:45 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 14:46:45 +0000 Subject: Processing of nlopt_2.2.4+dfsg-2_amd64.changes Message-ID: nlopt_2.2.4+dfsg-2_amd64.changes uploaded successfully to localhost along with the files: nlopt_2.2.4+dfsg-2.dsc nlopt_2.2.4+dfsg-2.debian.tar.gz libnlopt0_2.2.4+dfsg-2_amd64.deb libnlopt-dev_2.2.4+dfsg-2_amd64.deb python-nlopt_2.2.4+dfsg-2_amd64.deb octave-nlopt_2.2.4+dfsg-2_amd64.deb libnlopt-guile0_2.2.4+dfsg-2_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 24 14:47:47 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 14:47:47 +0000 Subject: nlopt_2.2.4+dfsg-2_amd64.changes ACCEPTED into unstable Message-ID: Accepted: libnlopt-dev_2.2.4+dfsg-2_amd64.deb to main/n/nlopt/libnlopt-dev_2.2.4+dfsg-2_amd64.deb libnlopt-guile0_2.2.4+dfsg-2_amd64.deb to main/n/nlopt/libnlopt-guile0_2.2.4+dfsg-2_amd64.deb libnlopt0_2.2.4+dfsg-2_amd64.deb to main/n/nlopt/libnlopt0_2.2.4+dfsg-2_amd64.deb nlopt_2.2.4+dfsg-2.debian.tar.gz to main/n/nlopt/nlopt_2.2.4+dfsg-2.debian.tar.gz nlopt_2.2.4+dfsg-2.dsc to main/n/nlopt/nlopt_2.2.4+dfsg-2.dsc octave-nlopt_2.2.4+dfsg-2_amd64.deb to main/n/nlopt/octave-nlopt_2.2.4+dfsg-2_amd64.deb python-nlopt_2.2.4+dfsg-2_amd64.deb to main/n/nlopt/python-nlopt_2.2.4+dfsg-2_amd64.deb Changes: nlopt (2.2.4+dfsg-2) unstable; urgency=low . [Sergey B Kirpichev] * Install libnlopt_guile.so (Closes: #679619) * Add multiarch support . [ Rafael Laboissiere ] * debian/rules: - Install the .oct file in the appropriate directory (Closes: #679617) . * Add Sergey B Kirpichev to Uploaders Override entries for your package: libnlopt-dev_2.2.4+dfsg-2_amd64.deb - extra libdevel libnlopt-guile0_2.2.4+dfsg-2_amd64.deb - extra devel libnlopt0_2.2.4+dfsg-2_amd64.deb - extra devel nlopt_2.2.4+dfsg-2.dsc - source devel octave-nlopt_2.2.4+dfsg-2_amd64.deb - extra devel python-nlopt_2.2.4+dfsg-2_amd64.deb - extra python Announcing to debian-devel-changes at lists.debian.org Closing bugs: 679617 679619 Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 24 14:47:50 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 14:47:50 +0000 Subject: nlopt override disparity Message-ID: There are disparities between your recently accepted upload and the override file for the following file(s): libnlopt-guile0_2.2.4+dfsg-2_amd64.deb: package says section is math, override says devel. libnlopt0_2.2.4+dfsg-2_amd64.deb: package says section is libs, override says devel. octave-nlopt_2.2.4+dfsg-2_amd64.deb: package says section is math, override says devel. Please note that a list of new sections were recently added to the archive: cli-mono, database, debug, fonts, gnu-r, gnustep, haskell, httpd, java, kernel, lisp, localization, ocaml, php, ruby, vcs, video, xfce, zope. At this time a script was used to reclassify packages into these sections. If this is the case, please only reply to this email if the new section is inappropriate, otherwise please update your package at the next upload. Either the package or the override file is incorrect. If you think the override is correct and the package wrong please fix the package so that this disparity is fixed in the next upload. If you feel the override is incorrect then please file a bug against ftp.debian.org and explain why. Please INCLUDE the list of packages as seen above, or we won't be able to deal with your request due to missing information. Please make sure that the subject of the bug you file follows the following format: Subject: override: BINARY1:section/priority, [...], BINARYX:section/priority Include the justification for the change in the body of the mail please. [NB: this is an automatically generated mail; if you already filed a bug and have not received a response yet, please ignore this mail. Your bug needs to be processed by a human and will be in due course, but until then the installer will send these automated mails; sorry.] -- Debian distribution maintenance software (This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster at debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 24 15:36:49 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 15:36:49 +0000 Subject: Processing of astk_1.10.4-4_amd64.changes Message-ID: astk_1.10.4-4_amd64.changes uploaded successfully to localhost along with the files: astk_1.10.4-4.dsc astk_1.10.4-4.debian.tar.gz code-aster-gui_1.10.4-4_all.deb code-aster-run_1.10.4-4_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 24 15:47:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 15:47:09 +0000 Subject: astk_1.10.4-4_amd64.changes REJECTED Message-ID: Reject Reasons: astk_1.10.4-4_amd64.changes file already known to dak md5sum and/or size mismatch on existing copy of astk_1.10.4-4.debian.tar.gz. md5sum and/or size mismatch on existing copy of astk_1.10.4-4.dsc. code-aster-gui_1.10.4-4_all.deb: can not overwrite existing copy already in the archive. md5sum and/or size mismatch on existing copy of code-aster-gui_1.10.4-4_all.deb. code-aster-run_1.10.4-4_all.deb: can not overwrite existing copy already in the archive. md5sum and/or size mismatch on existing copy of code-aster-run_1.10.4-4_all.deb. astk_1.10.4-4.dsc: old version (1.10.4-4) in unstable >= new version (1.10.4-4) targeted at unstable. can not overwrite existing copy of 'astk_1.10.4-4.debian.tar.gz' already in the archive. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From ftpmaster at ftp-master.debian.org Tue Jul 24 16:46:54 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 16:46:54 +0000 Subject: Processing of trilinos_10.8.5.dfsg-1_amd64.changes Message-ID: trilinos_10.8.5.dfsg-1_amd64.changes uploaded successfully to localhost along with the files: trilinos_10.8.5.dfsg-1.dsc trilinos_10.8.5.dfsg.orig.tar.gz trilinos_10.8.5.dfsg-1.debian.tar.gz libtrilinos_10.8.5.dfsg-1_amd64.deb libtrilinos-dev_10.8.5.dfsg-1_amd64.deb libtrilinos-dbg_10.8.5.dfsg-1_amd64.deb python-pytrilinos_10.8.5.dfsg-1_amd64.deb libtrilinos-doc_10.8.5.dfsg-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 24 16:47:19 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 24 Jul 2012 16:47:19 +0000 Subject: trilinos_10.8.5.dfsg-1_amd64.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From gladky.anton at gmail.com Tue Jul 24 17:32:54 2012 From: gladky.anton at gmail.com (Anton Gladky) Date: Tue, 24 Jul 2012 19:32:54 +0200 Subject: Bug#682650: feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY) In-Reply-To: <20120724094342.GA26908@xanadu.blop.info> References: <20120724094342.GA26908@xanadu.blop.info> Message-ID: tags 682650 + pending thanks Should be fixed in rev.45277 Anton From owner at bugs.debian.org Tue Jul 24 17:36:08 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 24 Jul 2012 17:36:08 +0000 Subject: Processed: Re: Bug#682650: feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY) References: Message-ID: Processing commands for control at bugs.debian.org: > tags 682650 + pending Bug #682650 [src:feel++] feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY) Added tag(s) pending. > thanks Stopping processing here. Please contact me if you need assistance. -- 682650: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682650 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From owner at bugs.debian.org Tue Jul 24 18:03:26 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 24 Jul 2012 18:03:26 +0000 Subject: Processed: reassign 682642 to pyqt4-dev-tools, reassign 682635 to pyqt4-dev-tools ... References: <1343152758-959-bts-jcristau@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > reassign 682642 pyqt4-dev-tools 4.9.3-3 Bug #682642 [src:code-saturne] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Bug reassigned from package 'src:code-saturne' to 'pyqt4-dev-tools'. No longer marked as found in versions code-saturne/2.1.7-1. Ignoring request to alter fixed versions of bug #682642 to the same values previously set Bug #682642 [pyqt4-dev-tools] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Marked as found in versions python-qt4/4.9.3-3. > reassign 682635 pyqt4-dev-tools Bug #682635 [src:dff] dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Bug reassigned from package 'src:dff' to 'pyqt4-dev-tools'. No longer marked as found in versions dff/1.2.0+dfsg.1-1. Ignoring request to alter fixed versions of bug #682635 to the same values previously set > reassign 682632 pyqt4-dev-tools Bug #682632 [src:pyacidobasic] pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:pyacidobasic' to 'pyqt4-dev-tools'. No longer marked as found in versions pyacidobasic/2.2-1. Ignoring request to alter fixed versions of bug #682632 to the same values previously set > reassign 682645 pyqt4-dev-tools Bug #682645 [src:pymecavideo] pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:pymecavideo' to 'pyqt4-dev-tools'. No longer marked as found in versions pymecavideo/6.0-5. Ignoring request to alter fixed versions of bug #682645 to the same values previously set > reassign 682630 pyqt4-dev-tools Bug #682630 [src:pysatellites] pysatellites: FTBFS: make[1]: pyuic4: Command not found Bug reassigned from package 'src:pysatellites' to 'pyqt4-dev-tools'. No longer marked as found in versions pysatellites/1.0-6. Ignoring request to alter fixed versions of bug #682630 to the same values previously set > reassign 682626 pyqt4-dev-tools Bug #682626 [src:qct] qct: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:qct' to 'pyqt4-dev-tools'. No longer marked as found in versions qct/1.7-3. Ignoring request to alter fixed versions of bug #682626 to the same values previously set > reassign 682638 pyqt4-dev-tools Bug #682638 [src:scolasync] scolasync: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:scolasync' to 'pyqt4-dev-tools'. No longer marked as found in versions scolasync/3.1-1. Ignoring request to alter fixed versions of bug #682638 to the same values previously set > reassign 682623 pyqt4-dev-tools Bug #682623 [src:uicilibris] uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:uicilibris' to 'pyqt4-dev-tools'. No longer marked as found in versions uicilibris/1.8-1. Ignoring request to alter fixed versions of bug #682623 to the same values previously set > reassign 682646 pyqt4-dev-tools Bug #682646 [pyqt4-dev-tools] pyuic4 should use python, not python3 Ignoring request to reassign bug #682646 to the same package > reassign 682649 pyqt4-dev-tools Bug #682649 [src:yade] yade: FTBFS: sh: 1: pyuic4: not found Bug reassigned from package 'src:yade' to 'pyqt4-dev-tools'. No longer marked as found in versions yade/0.80.1-2. Ignoring request to alter fixed versions of bug #682649 to the same values previously set > reassign 682628 pyqt4-dev-tools Bug #682628 [src:hachoir-metadata] hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Bug reassigned from package 'src:hachoir-metadata' to 'pyqt4-dev-tools'. No longer marked as found in versions hachoir-metadata/1.3.3-1. Ignoring request to alter fixed versions of bug #682628 to the same values previously set > forcemerge 682642 682635 682632 682645 682630 682626 682638 682623 682646 682649 682628 682637 Bug #682642 [pyqt4-dev-tools] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Bug #682637 [pyqt4-dev-tools] qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682635 [pyqt4-dev-tools] dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682628 [pyqt4-dev-tools] hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Marked as found in versions python-qt4/4.9.3-3. Bug #682645 [pyqt4-dev-tools] pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682623 [pyqt4-dev-tools] uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682626 [pyqt4-dev-tools] qct: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682632 [pyqt4-dev-tools] pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682646 [pyqt4-dev-tools] pyuic4 should use python, not python3 Marked as found in versions python-qt4/4.9.3-3. Bug #682638 [pyqt4-dev-tools] scolasync: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682630 [pyqt4-dev-tools] pysatellites: FTBFS: make[1]: pyuic4: Command not found Marked as found in versions python-qt4/4.9.3-3. Bug #682649 [pyqt4-dev-tools] yade: FTBFS: sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Merged 682623 682626 682628 682630 682632 682635 682637 682638 682642 682645 682646 682649 > thanks Stopping processing here. Please contact me if you need assistance. -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 682626: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682626 682628: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682628 682630: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682630 682632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682632 682635: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682635 682637: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682637 682638: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682638 682642: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682642 682645: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682645 682646: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682646 682649: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682649 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From michael.terry at canonical.com Tue Jul 24 21:10:29 2012 From: michael.terry at canonical.com (Michael Terry) Date: Tue, 24 Jul 2012 17:10:29 -0400 Subject: Bug#682714: vmtk: Please use unversioned libtiff-dev rather than libtiff4-dev Message-ID: <20120724211029.879.57704.reportbug@tambo> Package: vmtk Version: 1.0.1-1 Severity: minor Tags: patch User: ubuntu-devel at lists.ubuntu.com Usertags: origin-ubuntu quantal ubuntu-patch Dear Maintainer, It makes libtiff transitions (like the upcoming libtiff5 one) easier if the unversioned virtual package libtiff-dev is used instead of libtiff4-dev. Thanks for considering the patch. -- System Information: Debian Release: wheezy/sid APT prefers quantal-updates APT policy: (500, 'quantal-updates'), (500, 'quantal-security'), (500, 'quantal') Architecture: i386 (i686) Kernel: Linux 3.5.0-5-generic (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -------------- next part -------------- A non-text attachment was scrubbed... Name: vmtk_1.0.1-1ubuntu1.debdiff Type: text/x-diff Size: 763 bytes Desc: not available URL: From marco.mattiolo at hotmail.it Wed Jul 25 08:33:22 2012 From: marco.mattiolo at hotmail.it (Marco Mattiolo) Date: Wed, 25 Jul 2012 10:33:22 +0200 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: Il 23/07/2012 21:47, Jordi Guti?rrez Hermoso ha scritto: > On 23 July 2012 03:25, Marco Mattiolo wrote: >> But I'm asking, why should the user first plot with ugly fonts, then google >> "octave plot font", >> and then modify ~/.octaverc to suit his/her needs?? > Because it only affects a minority of people. You just happen to be in > that minority. I don't see the problem you're doing, so you must have > done something to your system fonts that I didn't do (or I did > something to my system fonts that you didn't do). > > - Jordi G. H. > > Hi Jordi, and thank you for answering. I'm not sure to be minority, so I've done a test on two different machines: on debian wheezy live (so brand-new os and none ~/.octaverc) sudo apt-get install octave octave octave:1> andamenti_tensione_corrente with the attached .m script. The plot in the popup window is ok (as in my previous tests), but the font in png output looks awful (as before). Please test the minimal script, my result is https://lh4.googleusercontent.com/-qIJVt3ZgymA/UA-ulr2-DZI/AAAAAAAAAhg/43BFnYLskkU/s800/andamenti_minimal.png Thank you Marco -------------- next part -------------- f=50; omega=2*pi*f; numcond=3; %numero dei subconduttori per fase raggiocond=31.5/2/1000; %raggio dei subconduttori [m] raggiofascio=230.94/1000; %raggio crf dei conduttori a fascio [m] D_12=9; %distanza fasi 1-2 [metri] D_23=9; D_31=18; D=(D_12*D_23*D_31)^(1/3); %distanza media geometrica tra le fasi d_eq=2*(numcond*raggiocond*((raggiofascio)^(numcond-1)))^(1/numcond); r=0; %resistenza chilometrica [ohm/km] l=(0.033/numcond +0.46*log10(2*D/d_eq))*0.001; %induttanza chilometrica [H/km] c=24.14/(log10(2*D/d_eq))*1e-9; % [F/km] g=0; z=r+i*omega*l; y=g+i*omega*c; %calcolo k e Z0 k=(z*y)^0.5; Z0=(z/y)^0.5; Za=(2/3)*Z0; %linea al 150% della pot.nat. h=0; for phi_a=-pi/2:pi/18:pi/2 ++h; Va=380000*(cos(phi_a)+i*sin(phi_a)); Ia=Va/Za; arrivo=[Va;Ia]; for lunghezza=1:15000 %matrice di trasmissione Tpd=[cosh(k*lunghezza),Z0*sinh(k*lunghezza);(1/Z0)*sinh(k*lunghezza),cosh(k*lunghezza)]; partenza=Tpd*arrivo; Vp(h,lunghezza)=imag(partenza(1)); Ip(h,lunghezza)=imag(partenza(2)); endfor subplot(2,1,1) if (h==10) %phi_a=0 plot(Vp(h,1:15000),'b'); elseif h==13 %phi_a=30 plot(Vp(h,1:15000),'k'); elseif h==16 %phi_a=60 plot(Vp(h,1:15000),'r'); elseif h==19 %phi_a=90 plot(Vp(h,1:15000),'c'); endif hold on subplot(2,1,2) if (h==10) %phi_a=0 plot(Ip(h,1:15000),'b'); elseif h==13 %phi_a=30 plot(Ip(h,1:15000),'k'); elseif h==16 %phi_a=60 plot(Ip(h,1:15000),'r'); elseif h==19 %phi_a=90 plot(Ip(h,1:15000),'c'); endif hold on endfor %ciclo for dell'argomento della tensione di arrivo %Inviluppo for lunghezza=1:15000 inviluppoV(lunghezza)=0; inviluppoI(lunghezza)=0; for h=1:19 if abs(Vp(h,lunghezza))>inviluppoV(lunghezza) inviluppoV(lunghezza)=abs(Vp(h,lunghezza)); endif if abs(Ip(h,lunghezza))>inviluppoI(lunghezza) inviluppoI(lunghezza)=abs(Ip(h,lunghezza)); endif endfor endfor subplot(2,1,1) plot(inviluppoV,'*'); plot(-inviluppoV,'*'); subplot(2,1,2) plot(inviluppoI,'*'); plot(-inviluppoI,'*'); %end Inviluppo subplot(2,1,1) title('Andamenti di tensione e corrente di linea aerea ideale funzionante al 150% della propria potenza naturale') ylabel('Tensione [V]') axis([0 15000]) set (gca(), 'xdir', 'reverse') hold off subplot(2,1,2) ylabel('Corrente [A]') xlabel('Distanza dall''arrivo della linea [km]') axis([0 15000]) set (gca(), 'xdir', 'reverse') hold off %Salvataggio grafici print -dpng andamenti_aerea_reale_potnat.png -------------- next part -------------- subplot(2,1,1) title('Andamenti di tensione e corrente di linea aerea ideale funzionante al 150% della propria potenza naturale') ylabel('Tensione [V]') axis([0 15000]) set (gca(), 'xdir', 'reverse') hold off subplot(2,1,2) ylabel('Corrente [A]') xlabel('Distanza dall''arrivo della linea [km]') axis([0 15000]) set (gca(), 'xdir', 'reverse') hold off %Salvataggio grafici print -dpng andamenti_aerea_reale_potnat.png From ftpmaster at ftp-master.debian.org Wed Jul 25 11:37:43 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 25 Jul 2012 11:37:43 +0000 Subject: Processing of eclib_2012-07-03-1_amd64.changes Message-ID: eclib_2012-07-03-1_amd64.changes uploaded successfully to localhost along with the files: eclib_2012-07-03-1.dsc eclib_2012-07-03.orig.tar.gz eclib_2012-07-03-1.debian.tar.gz libec0_2012-07-03-1_amd64.deb libec-dev_2012-07-03-1_amd64.deb eclib-tools_2012-07-03-1_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 25 11:47:11 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 25 Jul 2012 11:47:11 +0000 Subject: eclib_2012-07-03-1_amd64.changes is NEW Message-ID: Your package contains new components which requires manual editing of the override file. It is ok otherwise, so please be patient. New packages are usually added to the override file about once a week. From jordigh at octave.org Wed Jul 25 12:31:05 2012 From: jordigh at octave.org (=?UTF-8?Q?Jordi_Guti=C3=A9rrez_Hermoso?=) Date: Wed, 25 Jul 2012 08:31:05 -0400 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: On 25 July 2012 04:33, Marco Mattiolo wrote: > Please test the minimal script, my result is > https://lh4.googleusercontent.com/-qIJVt3ZgymA/UA-ulr2-DZI/AAAAAAAAAhg/43BFnYLskkU/s800/andamenti_minimal.png As I said, I didn't see this problem. I also don't use gnuplot to plot. Have you tried with the OpenGL backend? If you want this to work for gnuplot, looks to me like you have to file a bug with the ghostscript package to use a different default font. Also, I'm font blind, so I don't personally care about this problem either. - Jordi G. H. From noreply at release.debian.org Wed Jul 25 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Wed, 25 Jul 2012 16:39:14 +0000 Subject: yorick 2.2.02+dfsg-6 MIGRATED to testing Message-ID: FYI: The status of the yorick source package in Debian's testing distribution has changed. Previous version: 2.2.02+dfsg-1 Current version: 2.2.02+dfsg-6 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Wed Jul 25 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Wed, 25 Jul 2012 16:39:14 +0000 Subject: eigen3 3.1.0-1 MIGRATED to testing Message-ID: FYI: The status of the eigen3 source package in Debian's testing distribution has changed. Previous version: 3.1.0~rc1-1 Current version: 3.1.0-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From noreply at release.debian.org Wed Jul 25 16:39:14 2012 From: noreply at release.debian.org (Debian testing watch) Date: Wed, 25 Jul 2012 16:39:14 +0000 Subject: gyoto 0.0.3-5 MIGRATED to testing Message-ID: FYI: The status of the gyoto source package in Debian's testing distribution has changed. Previous version: 0.0.3-1 Current version: 0.0.3-5 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From mrs.marycheng_2012 at yahoo.com.hk Wed Jul 25 20:19:56 2012 From: mrs.marycheng_2012 at yahoo.com.hk (Mrs Mary Cheng) Date: Wed, 25 Jul 2012 17:19:56 -0300 Subject: Please contact me for a better brief of my offer !!! Message-ID: <20120725171956.ebe2ntyzj2koowsc@secure.upf.br> Hello, I have a transaction of mutual benefits, which I would like to share with you, for you to handle with me from my bank. I need you to assist me in executing this Business Project from Hong kong to your country. It involves an amount which I cannot state the exact amounts and full details due to security reasons, I like to acquire with your help and you will be compensated adequately upon your readiness to proceed with me. After the successful transaction, If you are interested in treating this business with utmost confidentiality and trust, send your response to my personal, Email: mrs.marycheng_2012 at yahoo.com.hk Thank you. Yours sincerely, Mrs Mary Cheng From ftpmaster at ftp-master.debian.org Wed Jul 25 21:13:47 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 25 Jul 2012 21:13:47 +0000 Subject: Processing of gmsh_2.6.1.dfsg-3_amd64.changes Message-ID: gmsh_2.6.1.dfsg-3_amd64.changes uploaded successfully to localhost along with the files: gmsh_2.6.1.dfsg-3.dsc gmsh_2.6.1.dfsg-3.debian.tar.gz gmsh_2.6.1.dfsg-3_amd64.deb libgmsh2_2.6.1.dfsg-3_amd64.deb libgmsh-dev_2.6.1.dfsg-3_amd64.deb gmsh-doc_2.6.1.dfsg-3_all.deb python-gmsh_2.6.1.dfsg-3_amd64.deb libjava-gmsh2_2.6.1.dfsg-3_amd64.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Wed Jul 25 21:17:19 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Wed, 25 Jul 2012 21:17:19 +0000 Subject: gmsh_2.6.1.dfsg-3_amd64.changes ACCEPTED into unstable Message-ID: Accepted: gmsh-doc_2.6.1.dfsg-3_all.deb to main/g/gmsh/gmsh-doc_2.6.1.dfsg-3_all.deb gmsh_2.6.1.dfsg-3.debian.tar.gz to main/g/gmsh/gmsh_2.6.1.dfsg-3.debian.tar.gz gmsh_2.6.1.dfsg-3.dsc to main/g/gmsh/gmsh_2.6.1.dfsg-3.dsc gmsh_2.6.1.dfsg-3_amd64.deb to main/g/gmsh/gmsh_2.6.1.dfsg-3_amd64.deb libgmsh-dev_2.6.1.dfsg-3_amd64.deb to main/g/gmsh/libgmsh-dev_2.6.1.dfsg-3_amd64.deb libgmsh2_2.6.1.dfsg-3_amd64.deb to main/g/gmsh/libgmsh2_2.6.1.dfsg-3_amd64.deb libjava-gmsh2_2.6.1.dfsg-3_amd64.deb to main/g/gmsh/libjava-gmsh2_2.6.1.dfsg-3_amd64.deb python-gmsh_2.6.1.dfsg-3_amd64.deb to main/g/gmsh/python-gmsh_2.6.1.dfsg-3_amd64.deb Changes: gmsh (2.6.1.dfsg-3) unstable; urgency=low . * [af505ec] Prevent overwriting of libgmsh.so.2 due to splitting the package. Policy 7.6.1. (Closes: #682164) Override entries for your package: gmsh-doc_2.6.1.dfsg-3_all.deb - optional doc gmsh_2.6.1.dfsg-3.dsc - source math gmsh_2.6.1.dfsg-3_amd64.deb - optional math libgmsh-dev_2.6.1.dfsg-3_amd64.deb - optional libdevel libgmsh2_2.6.1.dfsg-3_amd64.deb - optional math libjava-gmsh2_2.6.1.dfsg-3_amd64.deb - optional java python-gmsh_2.6.1.dfsg-3_amd64.deb - optional python Announcing to debian-devel-changes at lists.debian.org Closing bugs: 682164 Thank you for your contribution to Debian. From owner at bugs.debian.org Wed Jul 25 21:21:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Wed, 25 Jul 2012 21:21:13 +0000 Subject: Bug#682164: marked as done (trying to overwrite '/usr/lib/libgmsh.so.2', which is also in package gmsh 2.6.0.dfsg-2) References: <871uk7ih3z.fsf@deep-thought.43-1.org> Message-ID: Your message dated Wed, 25 Jul 2012 21:17:19 +0000 with message-id and subject line Bug#682164: fixed in gmsh 2.6.1.dfsg-3 has caused the Debian Bug report #682164, regarding trying to overwrite '/usr/lib/libgmsh.so.2', which is also in package gmsh 2.6.0.dfsg-2 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 682164: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682164 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Ansgar Burchardt Subject: trying to overwrite '/usr/lib/libgmsh.so.2', which is also in package gmsh 2.6.0.dfsg-2 Date: Thu, 19 Jul 2012 23:19:28 +0200 Size: 2071 URL: -------------- next part -------------- An embedded message was scrubbed... From: Anton Gladky Subject: Bug#682164: fixed in gmsh 2.6.1.dfsg-3 Date: Wed, 25 Jul 2012 21:17:19 +0000 Size: 6658 URL: From owner at bugs.debian.org Thu Jul 26 12:15:03 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Thu, 26 Jul 2012 12:15:03 +0000 Subject: Processed: Re: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot References: <501131AB.6090002@ramacher.at> <20120722135954.14323.77090.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: Processing control commands: > tags 682410 + patch Bug #682410 [viennacl] viennacl: FTBFS in a minimal sid amd64 chroot Added tag(s) patch. -- 682410: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682410 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From sebastian at ramacher.at Thu Jul 26 12:01:47 2012 From: sebastian at ramacher.at (Sebastian Ramacher) Date: Thu, 26 Jul 2012 14:01:47 +0200 Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: <20120722135954.14323.77090.reportbug@cake.ae.cs.uni-frankfurt.de> References: <20120722135954.14323.77090.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: <501131AB.6090002@ramacher.at> Control: tags 682410 + patch On 22/07/12 15:59, Andreas Beckmann wrote: > make[3]: Entering directory `/tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu' > /usr/bin/cmake -E cmake_progress_report /tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu/CMakeFiles 88 > [ 85%] Building CXX object examples/parameters/CMakeFiles/matrixparams.dir/matrix.cpp.o > cd /tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu/examples/parameters && /usr/bin/c++ -Wall -pedantic -I/tmp/buildd/viennacl-1.2.0 -I/tmp/buildd/viennacl-1.2.0/obj-x86_64-linux-gnu -I/tmp/bu > ildd/viennacl-1.2.0/external -o CMakeFiles/matrixparams.dir/matrix.cpp.o -c /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp > In file included from /tmp/buildd/viennacl-1.2.0/viennacl/matrix.hpp:28:0, > from /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:20: > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp: In instantiation of 'void viennacl::linalg::prod_impl(const viennacl::matrix_expression IGNMENT>, const viennacl::matrix, viennacl::op_trans>&, const viennacl::vector&, viennacl::vector&) [with SC > ALARTYPE = float; F = viennacl::row_major; unsigned int ALIGNMENT = 1u; unsigned int VECTOR_ALIGNMENT = 1u]': > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:1023:9: required from 'viennacl::vector& viennacl::vector::operator=(const vienna > cl::vector_expression, const viennacl::matrix, viennacl::op_trans>, const vie > nnacl::vector, viennacl::op_prod>&) [with F = viennacl::row_major; unsigned int MAT_ALIGNMENT = 1u; SCALARTYPE = float; unsigned int ALIGNMENT = 1u]' > /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix_functors.hpp:90:3: required from 'void matrix_trans_vec_mul(TestData&) [with TestData = test_data, viennacl::vecto > r, viennacl::matrix >]' > /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:154:3: required from 'int run_matrix_benchmark(test_config&, viennacl::io::parameter_database&) [with ScalarType = float]' > /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:237:42: required from here > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:369:7: error: 'trans_prod_impl' was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:381:10: note: 'template void viennacl::linalg::trans_prod_impl(const viennacl::matrix&, const viennacl::vector&, viennacl::vector&)' declared here, later in the translation unit > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp: In instantiation of 'void viennacl::linalg::prod_impl(const viennacl::matrix_expression, const viennacl::matrix, viennacl::op_trans>&, const viennacl::vector&, viennacl::vector&) [with SCALARTYPE = double; F = viennacl::row_major; unsigned int ALIGNMENT = 1u; unsigned int VECTOR_ALIGNMENT = 1u]': > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:1023:9: required from 'viennacl::vector& viennacl::vector::operator=(const viennacl::vector_expression, const viennacl::matrix, viennacl::op_trans>, const viennacl::vector, viennacl::op_prod>&) [with F = viennacl::row_major; unsigned int MAT_ALIGNMENT = 1u; SCALARTYPE = double; unsigned int ALIGNMENT = 1u]' > /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix_functors.hpp:90:3: required from 'void matrix_trans_vec_mul(TestData&) [with TestData = test_data, viennacl::vector, viennacl::matrix >]' > /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:154:3: required from 'int run_matrix_benchmark(test_config&, viennacl::io::parameter_database&) [with ScalarType = double]' > /tmp/buildd/viennacl-1.2.0/examples/parameters/matrix.cpp:253:45: required from here > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:369:7: error: 'trans_prod_impl' was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] > /tmp/buildd/viennacl-1.2.0/viennacl/linalg/matrix_operations.hpp:381:10: note: 'template void viennacl::linalg::trans_prod_impl(const viennacl::matrix&, const viennacl::vector&, viennacl::vector&)' declared here, later in the translation unit > make[3]: *** [examples/parameters/CMakeFiles/matrixparams.dir/matrix.cpp.o] Error 1 Please find attached a patch to fix this FTBFS. Kind regards -- Sebastian Ramacher -------------- next part -------------- A non-text attachment was scrubbed... Name: 682410.patch Type: text/x-diff Size: 1933 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: From christophe.trophime at lncmi.cnrs.fr Thu Jul 26 12:22:16 2012 From: christophe.trophime at lncmi.cnrs.fr (trophime) Date: Thu, 26 Jul 2012 14:22:16 +0200 Subject: Bug#682866: [oce] could you please add multiarch support? Message-ID: <1343305336.23497.103.camel@calcul8.lcmi.local> Package: oce Version: 0.9.1-3 Severity: wishlist --- Please enter the report below this line. --- I would need to have both amd64 and i386 version of OCE on my Debian box to run some mesh generation tools from DISTENE/INRIA. From noreply at release.debian.org Thu Jul 26 16:39:10 2012 From: noreply at release.debian.org (Debian testing watch) Date: Thu, 26 Jul 2012 16:39:10 +0000 Subject: lapack 3.4.1-5 MIGRATED to testing Message-ID: FYI: The status of the lapack source package in Debian's testing distribution has changed. Previous version: 3.4.1-4 Current version: 3.4.1-5 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From me at karlrupp.net Thu Jul 26 19:48:23 2012 From: me at karlrupp.net (Karl Rupp) Date: Thu, 26 Jul 2012 12:48:23 -0700 (PDT) Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: References: Message-ID: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> Hi Sebastian, thanks for the patch. Just two short questions: * Which compiler (version) did you use? * Do you happen to know whether the error shows up with ViennaCL 1.3.0 as well? Thanks and best regards, Karli (ViennaCL lead developer) From sebastian at ramacher.at Thu Jul 26 20:23:27 2012 From: sebastian at ramacher.at (Sebastian Ramacher) Date: Thu, 26 Jul 2012 22:23:27 +0200 Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> References: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> Message-ID: <5011A73F.6070102@ramacher.at> Hi Karl, On 26/07/12 21:48, Karl Rupp wrote: > thanks for the patch. Just two short questions: > * Which compiler (version) did you use? gcc 4.7 > * Do you happen to know whether the error shows up with ViennaCL 1.3.0 as well? ViennaCL 1.3.0 has the same issue. Michael Wild's package at mentors.debian.net [1] already contains the fix and he opened a bug report upstream [2]. Kind regards [1] http://mentors.debian.net/package/viennacl [2] http://sourceforge.net/tracker/?func=detail&aid=3530507&group_id=322140&atid=1353702 -- Sebastian Ramacher -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: From raybuntu at googlemail.com Thu Jul 26 20:44:00 2012 From: raybuntu at googlemail.com (Radostan Riedel) Date: Thu, 26 Jul 2012 22:44:00 +0200 Subject: cctbx package In-Reply-To: References: Message-ID: <20120726204400.GD9188@gmail.com> On Thu, 26. Jul 20:30, Fr?d?ric-Emmanuel Picca wrote: > It would be nice to switch from debian-science mailing list to debian-science-maintainer which seems > much more appropriate for packaging questions. > > So please register and continue the discussion on the maintainer one. > > thanks for your attention OK thanks, I was wondering if this discussion is appropriate in debian-science. regards Radi From frederic-emmanuel.picca at synchrotron-soleil.fr Thu Jul 26 20:53:05 2012 From: frederic-emmanuel.picca at synchrotron-soleil.fr (=?iso-8859-1?Q?PICCA_Fr=E9d=E9ric-Emmanuel?=) Date: Thu, 26 Jul 2012 20:53:05 +0000 Subject: cctbx package In-Reply-To: <20120726204400.GD9188@gmail.com> References: , <20120726204400.GD9188@gmail.com> Message-ID: > OK thanks, I was wondering if this discussion is appropriate in debian-science. no more :) . so your description of the pickled environment is interesting. You seems to says that other project using this libtbx library should beneficiate of your work. So the sastbx should be much easily package once done with cctbx. Nevertheless it seems to me that upstream is duplicating also this libtbx in the other project... I will be unavailable from Friday morning to Monday evening. But you seems to be completely autonomous now :) cheers Fred From raybuntu at googlemail.com Thu Jul 26 21:10:08 2012 From: raybuntu at googlemail.com (Radostan Riedel) Date: Thu, 26 Jul 2012 23:10:08 +0200 Subject: cctbx package In-Reply-To: References: <20120726204400.GD9188@gmail.com> Message-ID: <20120726211008.GA7881@gmail.com> On Thu, 26. Jul 20:53, Fr?d?ric-Emmanuel Picca wrote: > > OK thanks, I was wondering if this discussion is appropriate in debian-science. > > no more :) > . > so your description of the pickled environment is interesting. You seems to says that other project using this libtbx library should beneficiate of your work. > So the sastbx should be much easily package once done with cctbx. > > Nevertheless it seems to me that upstream is duplicating also this libtbx in the other project... > > > I will be unavailable from Friday morning to Monday evening. > But you seems to be completely autonomous now :) I know the code by heart ;). I'm not sure if this could be easy to remove that runtime dependency. A lot of tests are using this to find module paths etc. and would give us key errors. But when tests are not so important I can create an new environment object every time at runtime (btw. it needs to write PYTHON_VERSION_MAJOR_MINOR file to the disk but /tmp is enough) but I'd have to patch the methods that can produce keyerrors. I don't think upstream will accept that. Anyway, I wish you a nice weekend! Thanks for your patience and your willing to teach and sponsor me. I really appreciate it and I already learned a lot. Greetings Radi From me at karlrupp.net Thu Jul 26 21:23:32 2012 From: me at karlrupp.net (Karl Rupp) Date: Thu, 26 Jul 2012 23:23:32 +0200 Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: <5011A73F.6070102@ramacher.at> References: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> <5011A73F.6070102@ramacher.at> Message-ID: <5011B554.7090508@karlrupp.net> Hi Sebastian, ah, thanks for the info. We'll include the fix with the upcoming 1.3.1 release. Thanks a lot :-) Best regards, Karli On 07/26/2012 10:23 PM, Sebastian Ramacher wrote: > Hi Karl, > > On 26/07/12 21:48, Karl Rupp wrote: >> thanks for the patch. Just two short questions: >> * Which compiler (version) did you use? > > gcc 4.7 > >> * Do you happen to know whether the error shows up with ViennaCL 1.3.0 as well? > > ViennaCL 1.3.0 has the same issue. Michael Wild's package at mentors.debian.net > [1] already contains the fix and he opened a bug report upstream [2]. > > Kind regards > > [1] http://mentors.debian.net/package/viennacl > [2] > http://sourceforge.net/tracker/?func=detail&aid=3530507&group_id=322140&atid=1353702 > From wild at ifd.mavt.ethz.ch Thu Jul 26 20:39:45 2012 From: wild at ifd.mavt.ethz.ch (Michael Wild) Date: Thu, 26 Jul 2012 22:39:45 +0200 Subject: Bug#682410: Re: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: <5011A73F.6070102@ramacher.at> References: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> <5011A73F.6070102@ramacher.at> Message-ID: <5011AB11.5020407@ifd.mavt.ethz.ch> On 07/26/2012 10:23 PM, Sebastian Ramacher wrote: > Hi Karl, > > On 26/07/12 21:48, Karl Rupp wrote: >> thanks for the patch. Just two short questions: >> * Which compiler (version) did you use? > > gcc 4.7 > >> * Do you happen to know whether the error shows up with ViennaCL 1.3.0 as well? > > ViennaCL 1.3.0 has the same issue. Michael Wild's package at mentors.debian.net > [1] already contains the fix and he opened a bug report upstream [2]. > > Kind regards > > [1] http://mentors.debian.net/package/viennacl > [2] > http://sourceforge.net/tracker/?func=detail&aid=3530507&group_id=322140&atid=1353702 > Thanks Sebastian. How should I proceed? Should I upload viennacl-1.2.0-2 to mentors and ask for sponsorship? I don't suppose that 1.3.0-1 would be uploadable due to the freeze, right? Michael From sebastian at ramacher.at Thu Jul 26 22:45:02 2012 From: sebastian at ramacher.at (Sebastian Ramacher) Date: Fri, 27 Jul 2012 00:45:02 +0200 Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: <5011AB11.5020407@ifd.mavt.ethz.ch> References: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> <5011A73F.6070102@ramacher.at> <5011AB11.5020407@ifd.mavt.ethz.ch> Message-ID: <5011C86E.7080808@ramacher.at> Hi Michael, On 26/07/12 22:39, Michael Wild wrote: > How should I proceed? Should I upload viennacl-1.2.0-2 to mentors and > ask for sponsorship? I don't suppose that 1.3.0-1 would be uploadable > due to the freeze, right? > > Michael The diff between 1.2.0-1 and 1.3.0-1 is huge: 311 files changed, 19800 insertions(+), 3235 deletions(-) So viennacl 1.2.0-2 with only the fix for this bug sounds like the best idea to me. That'd make it easier for the Release Team to review the diff and to grant a freeze exception to viennacl eventually. Kind regards -- Sebastian Ramacher -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: From sebastian at ramacher.at Thu Jul 26 23:16:36 2012 From: sebastian at ramacher.at (Sebastian Ramacher) Date: Fri, 27 Jul 2012 01:16:36 +0200 Subject: Bug#682907: World Wind 1.4 is available Message-ID: <20120726231636.18737.38620.reportbug@localhost> Source: worldwind Version: 0.5.0-8 Severity: wishlist -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Please package the new World Wind release. - -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (650, 'unstable'), (601, 'testing'), (600, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAEBCAAGBQJQEc/UAAoJEGny/FFupxmTNjMQAIcejqgmSdjc5tGfk16/E1Bw 5rrH/b5b0ra1AA7sYaV5M6t8H3ab/XOZZhf2mcpkRLs8Ouy5PmF2Ibdc211bl7bC 3BUtbC9TE93iEcgXoXHQV0jsAAfrF/I2Tzux4SX69QtWmakhMf2nw+YtiPbDoXzi rV/botTj0tAWsgZcfDwXlH2Kn0F39nufVtyPWhh6d8L1gH+gdgpFohobRG7rsdjZ gr5A5gCX77Frh68KTvwDG/GSO7D3RAZx2QLuJFBCxX/urEvWHdFzYIA0/B4Uwj+9 8Tfqyvm85XL+kH/yu3X9+eKx/QhoHIG5pBjUbtKNf9fT6ZVULCS4BnLbL4+hr7lB UmQM5Wma/y50/Anrtxn39RJnVgDwIBYNzKUSHeya4MpP8flq4dgIVpohgKmIoEU4 nh5fFjaDGaGkltic+yjIBZhbyc/9ju7DU3wxFSGebyfnVjcHFD3b6q36LdmF/ApI +09wycxzZ/wgW+Ng0rn0w2RrvOJMmYhpTiNcBQqecj2EZVcV5riXIyD5nGVFD9V4 Z6MkG0BzNInpB9WKuLXfAZ+SiNJEtw7BWioXjSVdxJTzr0RlF7Dq8CgDcqwbHTt+ OsSEIC4VpUFBULCP770T7gFnvUWZrtsU4rCMQ7T4KKU63Dtz9T5BHWMXGlMDuVB3 jyeBLnir63aCd4s4+xYc =NCWh -----END PGP SIGNATURE----- From psanchez at bsisd.esc18.net Fri Jul 27 00:11:58 2012 From: psanchez at bsisd.esc18.net (Sanchez, Patsy A.) Date: Thu, 26 Jul 2012 19:11:58 -0500 Subject: NOKIA Message-ID: <6CDFF538170CED44A89FDCE3AE3203F407DF482D9D@primary-mail.bsisd.esc18.net> Congratulations! Your code number 098664 has won you a prize money of ?700,000.00 Pounds. Nokia is celebrating her 56 years anniversary and we are giving out this lump sum as a way of showing our appreciation. For your claims, kindly send email to claimsconsultant2011 at yahoo.com.hk for verification. Nokia Mobile Promo. (c) Nokia Connecting People -------------- next part -------------- An HTML attachment was scrubbed... URL: From donglueruff at yahoo.cn Fri Jul 27 00:24:00 2012 From: donglueruff at yahoo.cn (mpkgckid) Date: Fri, 27 Jul 2012 08:24:00 +0800 (CST) Subject: =?utf-8?B?6K+35p+l5pS2Me+8gQ==?= Message-ID: <1343348640.57410.YahooMailClassic@web92415.mail.cnh.yahoo.com> ?????? ? ? ???...?????136 8230 8656? ????QQ? 1596891248:???????????????????????????? ?????????????? -------------- next part -------------- An HTML attachment was scrubbed... URL: From psanchez at bsisd.esc18.net Fri Jul 27 00:12:04 2012 From: psanchez at bsisd.esc18.net (Sanchez, Patsy A.) Date: Thu, 26 Jul 2012 19:12:04 -0500 Subject: NOKIA Message-ID: <6CDFF538170CED44A89FDCE3AE3203F407DF482D9E@primary-mail.bsisd.esc18.net> Congratulations! Your code number 098664 has won you a prize money of ?700,000.00 Pounds. Nokia is celebrating her 56 years anniversary and we are giving out this lump sum as a way of showing our appreciation. For your claims, kindly send email to claimsconsultant2011 at yahoo.com.hk for verification. Nokia Mobile Promo. (c) Nokia Connecting People -------------- next part -------------- An HTML attachment was scrubbed... URL: From Tonya.Goff at owasso.k12.ok.us Fri Jul 27 00:42:37 2012 From: Tonya.Goff at owasso.k12.ok.us (Tonya Goff) Date: Fri, 27 Jul 2012 00:42:37 +0000 Subject: Dear web user, Message-ID: <7F8EE5670DA9E14498F83C3187239AAB273293@EXMAIL2.owasso.k12.ok.us> Dear web user, Will are currently running on maintainers in our database and your email has runs20.9GB at of 20.10 in other for your email not to be deleted out of our database PLEASE CLICK HERE to follow the instruction.Sorry for the inconvenience DATA BASE. SERVE YOU BETTER -------------- next part -------------- An HTML attachment was scrubbed... URL: From themiwi at users.sourceforge.net Fri Jul 27 05:56:45 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 05:56:45 +0000 Subject: Bug#682927: freefoam: FTBFS with GCC-4.7 because of missing qualifications of template-dependent names Message-ID: <20120727055645.10852.69607.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: serious Tags: upstream patch Justification: fails to build from source (but built successfully in the past) Dear Maintainer, g++-4.7 is more strict about qualifiying template-dependent names than previous versions where, and hence freefoam fails to build from source. The issue has been fixed in the upstream repository: http://repo.or.cz/w/freefoam.git?a=commit;h=6ba7fe4ed4cf45de8edd362bea123acb89bfab82 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash -------------- next part -------------- A non-text attachment was scrubbed... Name: missing-qualifications-of-template-dependent-names.diff Type: text/x-diff Size: 54966 bytes Desc: not available URL: From themiwi at users.sourceforge.net Fri Jul 27 04:46:10 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 06:46:10 +0200 Subject: Bug#682410: viennacl: FTBFS in a minimal sid amd64 chroot In-Reply-To: <5011C86E.7080808@ramacher.at> References: <5cb98009-2d80-44d5-94a4-155d74c90ec3@googlegroups.com> <5011A73F.6070102@ramacher.at> <5011AB11.5020407@ifd.mavt.ethz.ch> <5011C86E.7080808@ramacher.at> Message-ID: <50121D12.9010201@users.sourceforge.net> On 07/27/2012 12:45 AM, Sebastian Ramacher wrote: > Hi Michael, > > On 26/07/12 22:39, Michael Wild wrote: >> How should I proceed? Should I upload viennacl-1.2.0-2 to mentors and >> ask for sponsorship? I don't suppose that 1.3.0-1 would be uploadable >> due to the freeze, right? >> >> Michael > > The diff between 1.2.0-1 and 1.3.0-1 is huge: > 311 files changed, 19800 insertions(+), 3235 deletions(-) > > So viennacl 1.2.0-2 with only the fix for this bug sounds like the best idea to > me. That'd make it easier for the Release Team to review the diff and to grant a > freeze exception to viennacl eventually. > > Kind regards > The frustrating thing about this is that I uploaded 1.3.0-1 to mentors back in *march* and prodded the mentors and science lists multiple times... I will prepare a 1.2.0-2 version containing this fix as soon as I can. Michael From themiwi at users.sourceforge.net Fri Jul 27 06:40:59 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 06:40:59 +0000 Subject: Bug#682931: freefoam: The freefoam-log utility fails on truncated logs Message-ID: <20120727064059.13915.86506.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: normal Tags: upstream patch Dear Maintainer, freefoam-log fails to work with a truncated log file where some of the data at the last time-step is cut off (e.g. because the user aborted the program). This is already fixed in upstream: http://repo.or.cz/w/freefoam.git?a=commit;h=12af016309fc4828035e16290bc128955507ed43 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information -------------- next part -------------- A non-text attachment was scrubbed... Name: handle-truncated-logs-in-freefoam-log.diff Type: text/x-diff Size: 1000 bytes Desc: not available URL: From owner at bugs.debian.org Fri Jul 27 09:27:12 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 27 Jul 2012 09:27:12 +0000 Subject: Processed: your mail References: <50125EC1.1060404@users.sourceforge.net> Message-ID: Processing commands for control at bugs.debian.org: > severity 682943 serious Bug #682943 [freefoam] freefoam: The libfreefoam package installs *.so links which should be in libfreefoam-dev Severity set to 'serious' from 'normal' > thanks Stopping processing here. Please contact me if you need assistance. -- 682943: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682943 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From themiwi at users.sourceforge.net Fri Jul 27 07:28:54 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 07:28:54 +0000 Subject: Bug#682940: freefoam: FTBFS because of a missing build-dependency on graphviz Message-ID: <20120727072854.21318.16034.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: serious Justification: fails to build from source Dear Maintainer, Building the Doxygen documentation fails because of a missing build-dependency on graphviz. Without the dot utility Doxygen is not able to generate the graphs. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information From themiwi at users.sourceforge.net Fri Jul 27 07:53:49 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 07:53:49 +0000 Subject: Bug#682942: freefoam: debian/copyright does not cover all files Message-ID: <20120727075349.23226.55418.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: serious Justification: Policy 12.5 Dear Maintainer, Quite a few files, authors and licenses present in from the source package are not mentioned in the debian/copyright file. Files: *.C *.H *.L *.C.in *.c *.h *.unv *.msh *.agr *.gplt *.xy *.geo *.dat data/templates/foamCommentStyles etc/* Copyright: Copyright (C) 1991-2010 OpenCFD Ltd. License: GPL-3+ Files: doc/UserGuide/*.txt Copyright: Copyright (C) 2000-2010 OpenCFD Ltd. License: GFDL-NIV-1.2 Files: */CMakeLists.txt *.cmake *.cmake.in *.xsl *.py *.py.in *.patch */forceLink.C data/asciidoc/*.conf data/editor-modes/foamdict-mode.el doc/man/manSource/*.1.in.txt src/OSspecific/POSIX/dummyPrintStack.C src/OSspecific/POSIX/printStack.C src/OpenFOAM/db/IOstreams/Pstreams/*Impl.H src/OpenFOAM/db/IOstreams/Pstreams/*Impl.C src/Pstream/*/*Impl.H data/templates/*.C data/templates/*.H data/templates/foamScript data/shellFunctions/bashCompletion/freefoam data/shellFunctions/zshCompletion/_freefoam FOAMConfig.h.in data/utilities/findBogusClassDoc data/utilities/foamPackSource data/utilities/updateChangeLog doc/Doxygen/FoamFooter.html doc/Doxygen/FoamHeader.html.in Copyright: 2008-2012, Michael Wild License: GPL-3+ Files: doc/UserGuide/*.asy doc/UserGuide/*.png doc/UserGuide/images/tut_plateHole_leftPatch_sigmaxx.xy doc/UserGuide/images/post_Ux_0 doc/js/MathJaxMacros.js Copyright: Copyright (C) 2008-2012 Michael Wild License: GFDL-NIV-1.2 On Debian systems, the full text of the GNU Free Documentation License version 1.2 can be found in the file '/usr/share/common-licenses/GFDL-1.2' Files: data/asciidoc/html.conf Copyright: 2008-2012, Michael Wild 2008 by Stuart Rackham License: GPL-2 On Debian systems, the full text of the GNU General Public License version 2 can be found in the file '/usr/share/common-licenses/GPL-2' Files: src/OpenFOAM/primitives/random/BSD_random.c Copyright: 1983, Regents of the University of California License: BSD-4-clause Files: src/OpenFOAM/db/IOstreams/gzstream/gzstream.h src/OpenFOAM/db/IOstreams/gzstream/gzstream.C Copyright: 2001, Deepak Bandyopadhyay, Lutz Kettner License: LGPL-2.1+ Files: data/python/FreeFOAM/compat.py Copyright: 2001-2007, Python Software 2003-2005, Peter Astrand 2008-2012, Michael Wild License: PSF-2 and GPL-3+ -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information From themiwi at users.sourceforge.net Fri Jul 27 09:30:06 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 09:30:06 +0000 Subject: Bug#682953: freefoam: The libfreefoam package does not have the SOVERSION in its name Message-ID: <20120727093006.30336.17970.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: serious Justification: Policy 8.1 Dear Maintainer, According to policy section 8.1, shared library packages must have the SOVERSION appended to the base package name. I.e. it should be called libfreefoam1. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information From themiwi at users.sourceforge.net Fri Jul 27 08:03:01 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 08:03:01 +0000 Subject: Bug#682943: freefoam: The libfreefoam package installs *.so links which should be in libfreefoam-dev Message-ID: <20120727080301.23740.82207.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: normal Dear Maintainer, The package libfreefoam contains the *.so development symlinks which according to policy section 8.4 should go into the libfreefoam-dev package. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information From angel at debian.org Fri Jul 27 10:44:26 2012 From: angel at debian.org (Angel Abad) Date: Fri, 27 Jul 2012 12:44:26 +0200 Subject: Bug#682956: gyoto: FTBFS with binutils-gold Message-ID: <20120727104426.1108.44598.reportbug@bangalore> Package: gyoto Severity: minor User: peter.fritzsche at gmx.de Usertags: no-add-needed Dear Maintainer, gyoto package fails to build from source with binutils-gold, see the log g++ -o gyoto -Wl,-Bsymbolic-functions -Wl,-z,relro -lxerces-c -lxerces-c -lstdc++ -lm -lxerces-c -lcfitsio gyoto.o -L../lib -lgyoto -ldl gyoto.o: In function `sigint_handler(int)': /build/buildd/gyoto-0.0.3/bin/gyoto.C:52: undefined reference to `ffppx' /build/buildd/gyoto-0.0.3/bin/gyoto.C:53: undefined reference to `ffclos' /build/buildd/gyoto-0.0.3/bin/gyoto.C:54: undefined reference to `ffrprt' gyoto.o: In function `xercesc_3_1::XMLAttDefList::~XMLAttDefList()': /usr/include/xercesc/framework/XMLAttDefList.hpp:158: undefined reference to `xercesc_3_1::XMemory::operator delete(void*)' gyoto.o: In function `xercesc_3_1::DTDEntityDecl::~DTDEntityDecl()': /usr/include/xercesc/validators/DTD/DTDEntityDecl.hpp:160: undefined reference to `xercesc_3_1::XMLEntityDecl::~XMLEntityDecl()' gyoto.o: In function `~DTDEntityDecl': /usr/include/xercesc/validators/DTD/DTDEntityDecl.hpp:160: undefined reference to `xercesc_3_1::XMLEntityDecl::~XMLEntityDecl()' gyoto.o: In function `xercesc_3_1::DTDEntityDecl::~DTDEntityDecl()': /usr/include/xercesc/validators/DTD/DTDEntityDecl.hpp:162: undefined reference to `xercesc_3_1::XMemory::operator delete(void*)' gyoto.o: In function `main': [...] Patch attached! -- System Information: Debian Release: wheezy/sid APT prefers precise-updates APT policy: (500, 'precise-updates'), (500, 'precise-security'), (500, 'precise'), (100, 'precise-backports') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -------------- next part -------------- A non-text attachment was scrubbed... Name: fix-ftbfs-with-binutils-gold Type: text/x-diff Size: 578 bytes Desc: not available URL: From themiwi at users.sourceforge.net Fri Jul 27 06:56:25 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 06:56:25 +0000 Subject: Bug#682934: freefoam: The -doc and -srcDoc options fail to find the Doxygen docs Message-ID: <20120727065625.14429.71267.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: normal Tags: upstream patch Dear Maintainer, When using the -doc or -srcDoc options, the Doxygen docs are not found. There are three problems: 1. The file /usr/share/freefoam/DoxyDocIndex is in the libfreefoam-dev package, while it should be in freefoam-dev-doc. 2. The file /usr/share/freefoam/DoxyDocIndex assumes that the documentation is in /usr/share/doc/freefoam/API, while it actually is in /usr/share/doc/freefoam-dev-doc/API. This can be solved by either symlinking that directory or by patching DoxyDocIndex. 3. The DoxyDocIndex uses an old name-mangling assumption of Doxygen. When looking for the source documentation (-srcDoc option) it assumes that the documentation file ends in *-source.html, while Doxygen versions newer than 1.5.7 use *_source.html. This problem is fixed in upstream: http://repo.or.cz/w/freefoam.git?a=commit;h71a4abe02b972e10e8e232e85836b2e2252ee064 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information -------------- next part -------------- A non-text attachment was scrubbed... Name: doxygen-generated-file-names-breakage.diff Type: text/x-diff Size: 2671 bytes Desc: not available URL: From ccssit201202 at hotmail.com Fri Jul 27 10:53:26 2012 From: ccssit201202 at hotmail.com (ccssit201202) Date: Fri, 27 Jul 2012 18:53:26 +0800 Subject: JLR Mongoose & HINO Diagnostic explorer & related auto diagnostic tools promotion in 2012 Year Message-ID: Dear . Nice to meet you here , I am Alice.We are a professional manufacturer of car diagnostics tools, automotive scan tools, diesel engine diagnostics, auto scanner diagnostic, and car repairing tools in China. below is our new promoation for auto diagnostic tools,These are our new product ,please check, if interested,welcom to enquiry. More Product Information Please Visit Our Website As : http://www.ccssit.cn, http://advanced-diagnostics.com.cn, http://www.ccssit.net http://www.ccssit.cn/Html/ProductView.asp?ID=357&SortID=138 1.HINO Diagnostic explorer Hino-Bowie V2.03 Hino Diagnostic eXplorer The HINO Diagnostic eXplorer (hereafter referred to as HINO DX) is a tool equipped with all the functions needed to diagnose trouble, check functions, and configure the settings of the electronic systems built into HINO engines. Main Functions Acquires and deletes trouble data. Links diagnostic trouble codes read from the ECU to corresponding diagnostic work flow sequences and directly displays the required data. Obtains sensor conditions from the vehicle when trouble occurs (Freeze Frame function). Monitors the sensors and actuators equipped on the engine (Data Monitor function) and tests the operation of solenoid valves by forcefully operating them (Active Test function). Simulates diagnostic work with only a PC(Simulation function). Automatically saves fetched ECU data and analyzes trouble based on the saved data even when the cause of trouble cannot be grasped. Aisin Transmission data viewing and diagnostics-2001-2007 Model Years * Display and Clear Diagnostic Codes * Display live data for diagnosis MDTICs Engine data viewing and diagnostics-2001-2004 Model Years * Display and Clear Diagnostic Codes * Display live data for diagnosis J05 & J08 Engine data viewing and diagnostics 2005-2008 Model Years * Display and Clear Diagnostic Codes * Display live data for diagnosis-Specific data can be selected Full Customization Capability * Turn on Engine Protection Shutdown System * Set Maximum Vehicle Speed * Set Maximum Cruise Control Speed * Set PTO idle speeds fixed and variable * Change Injector Calibration QR Code when replacing injectors * Supply Pump relearning when replacing SCV or supply pump * Complete DPF testing and regeneration capabillity * Built in Help Menus for troubleshooting specific diagnostics The package includes: 1.Diagnositc interface 2.OBDII Cable 3.USB Cable 4.Diagnostic Software 2.JLR Mongoose for Jaguar and Land Rover http://www.ccssit.cn/Html/ProductView.asp?ID=359&SortID=138 JLR Mongoose for Jaguar and Land Rover Mongoose is a low-cost, high-performance vehicle network interface that connects a laptop directly to the Bus Network via the OBD-II connector. Drew Technologies designed this product to be affordable for Professional Technicians, CarPCs, the aftermarket, and automotive enthusiasts. The package includes: Mongoose JLR vehicle interface for Jaguar & Land Rover Installation CD with device driver (J2534 compatible) The Mongoose JLR includes a J2534 driver and delivers full-speed (12mps) USB 2.0 performance. This version is compatible with late model J2534 compliant Jaguar & Land Rover models. This includes 1999 & Up Jaguar and 2005 & up Land Rover, requires a subscription to IDS version 125 & up Key Features of the Mongoose JLR for Jaguar & Land Rover J2534 and J2534-1 compliant device driver Commercial Range (0 to +70?) Dimensions: 3" x 1.75" Operating Voltage: Bus-powered by USB Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver Lost cost, high performance pass-thru diagnostic tool for use with PC USB Diagnostics tool for CAN and ISO9141 vehicles Supports reprogramming for Jaguar 1999 & up, Land Rover 2005 & up. Simple packaging with electronics contained inside the cable. J2534 and J2534-1 compliant device driver Commercial Range (0 to +70?) Dimensions: 3" x 1.75" Operating Voltage: Bus-powered by USB Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver Bus Protocols supported by the Mongoose JLR for Jaguar & Land Rover CAN Bus (details published soon) More details published soon, will work with IDS 125 software subscription for dealer level diagnostics & module programming. Instructions to acquire IDS 125 here at this link. Diagnostics with the Mongoose JLR for Jaguar & Land Rover The Mongoose JLR is a USB pass-thru device that utilizes the SAE J2534-1 API. What this means is that the Mongoose JLR uses a standard communications interface to the vehicle, allowing it to work with 3rd party diagnostic applications. Different diagnostics and data logging applications supported are currently supported by the Mongoose, with more being added all of the time. NEW! Jaguar / Land Rover are now supported for dealer level diagnostics & module programming using their software (available here) and the Mongoose JLR. This includes 1999 & Up Jaguar and 2005 & up Land Rover, requires a subscription to IDS version 125 & up. Instructions to acquire IDS 128 here at this link. After sale service: Free update during one year Free repair and maintenance service in one year Free technical support by internet or via phone Delivery time:in 1 -3 working day have a confirmation with your payment. Looking forward to your favorable and prompt reply Faithfully Yours Alice China Century Technology Co., Ltd ------------------------------------------------------------------------------------------------------------ Contact us Tel: 0086-0797-8459933 Fax: 0086-0797-8459833 Skype: ccssitalice E-mail: auto204 at reliablediag.com MSN: ccssit.clark at hotmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From themiwi at users.sourceforge.net Fri Jul 27 06:08:31 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 06:08:31 +0000 Subject: Bug#682928: freefoam: Contains non-DFSG-free files Message-ID: <20120727060831.10918.97136.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: serious Justification: Policy 2.1 Dear Maintainer, The source package contains several non-free files. Namely, these are: * Removed by upstream in commit e0497b96c7c179ff85d76a06245171a119e291ba: - applications/test/readCHEMKINIII/CHEMKINdata/chem.* - applications/test/readCHEMKINIII/CHEMKINdata/therm* - applications/test/readCHEMKINIII/CHEMKINdata/test.inp - applications/test/readCHEMKINIII/CHEMKINdata/ckinterp.f * Removed by upstream in commit 1db671676931e31d12da133f3fd2d80c0c68f019: - applications/utilities/postProcessing/dataConversion/foamToFieldview9/write_binary_uns.c - applications/utilities/postProcessing/dataConversion/foamToFieldview9/fv_reader_tags.h * Removed by upstream in commit b77175cec63bd7cdc007b301ee2980f104e41150: - applications/utilities/postProcessing/graphics/ensightFoamReader/* * Removed by upstream in commit d0b5c16e1f8debd80ad8a5b7c281c0b54af3c8d5: - applications/utilities/surface/surfaceCoarsen/bunnylod/rabdata.[Ch] * Removed by upstream in commit e9f13e87806ceb9996d9e26dc586f4fa766d767c: - applications/utilities/mesh/conversion/kivaToFoam/kiva3v-valves.* -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash From themiwi at users.sourceforge.net Fri Jul 27 06:44:50 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Fri, 27 Jul 2012 06:44:50 +0000 Subject: Bug#682932: freefoam: The freefoam-log utility writes to $PWD/logs/ instead of /logs/ Message-ID: <20120727064450.14298.11863.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: normal Tags: upstream patch Dear Maintainer, This issue has been fixed by upstream in: http://repo.or.cz/w/freefoam.git?a=commit;h=aad97ace1c6144f64f751642c44ce60cef9066d6 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information -------------- next part -------------- A non-text attachment was scrubbed... Name: correct-output-directory-for-freefoam-log.diff Type: text/x-diff Size: 1274 bytes Desc: not available URL: From devel at baptiste-carvello.net Fri Jul 27 12:34:57 2012 From: devel at baptiste-carvello.net (Baptiste Carvello) Date: Fri, 27 Jul 2012 14:34:57 +0200 Subject: cctbx package In-Reply-To: <20120726211008.GA7881@gmail.com> References: <20120726211008.GA7881@gmail.com> Message-ID: <50128AF1.4080300@baptiste-carvello.net> Hello Radi, I just pushed my changes (commit 34c2a375). On my machine, it builds, and the python modules in python-cctbx seem to be usable. If you've got any remarks, just tell me (I'm now subscribed on the -maintainers list). Cheers, Baptiste From owner at bugs.debian.org Fri Jul 27 14:21:12 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 27 Jul 2012 14:21:12 +0000 Subject: Processed: Bug#682968: Raise severity as it fixes an RC bug References: <20120727140445.GB2774@marvin.lan> Message-ID: Processing commands for control at bugs.debian.org: > severity 682968 serious Bug #682968 [sponsorship-requests] RFS: viennacl/1.2.0-2 Severity set to 'serious' from 'normal' > retitle 682968 RFS: viennacl/1.2.0-2 [RC] Bug #682968 [sponsorship-requests] RFS: viennacl/1.2.0-2 Changed Bug title to 'RFS: viennacl/1.2.0-2 [RC]' from 'RFS: viennacl/1.2.0-2' > block 682410 by 682968 Bug #682410 [viennacl] viennacl: FTBFS in a minimal sid amd64 chroot 682410 was not blocked by any bugs. 682410 was not blocking any bugs. Added blocking bug(s) of 682410: 682968 > package sponsorship-requests Limiting to bugs with field 'package' containing at least one of 'sponsorship-requests' Limit currently set to 'package':'sponsorship-requests' > user sponsorship-requests at packages.debian.org Setting user to sponsorship-requests at packages.debian.org (was benoit.knecht at fsfe.org). > usertags 682968 for-wheezy There were no usertags set. Usertags are now: for-wheezy. > End of message, stopping processing here. Please contact me if you need assistance. -- 682410: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682410 682968: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682968 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From raybuntu at googlemail.com Fri Jul 27 16:09:09 2012 From: raybuntu at googlemail.com (Radostan Riedel) Date: Fri, 27 Jul 2012 18:09:09 +0200 Subject: cctbx package In-Reply-To: <50128AF1.4080300@baptiste-carvello.net> References: <20120726211008.GA7881@gmail.com> <50128AF1.4080300@baptiste-carvello.net> Message-ID: <20120727160909.GA5322@gmail.com> On Fri, 27. Jul 14:34, Baptiste Carvello wrote: > Hello Radi, Hello Baptiste, > > I just pushed my changes (commit 34c2a375). On my machine, it builds, > and the python modules in python-cctbx seem to be usable. If you've got > any remarks, just tell me (I'm now subscribed on the -maintainers list). I really have to say great work! I just read a bit the code and haven't test it yet but your code looks good. I need to explain a little bit about that modify libtbx_env method. I couldn't set the paths for all dispatcher scripts so I just did a: reset_dispatcher_bookkeeping() What basically deletes all. This was just a temporary fix. Problem is that the paths are hold in a dict "_dispatcher_registry". Problem is that the key is a relocatable_path object and the value is a list or tuple of relocatable_path objects. Maybe you can look into it and find a nice way to set the correct paths. regards Radi From ftpmaster at ftp-master.debian.org Fri Jul 27 18:47:21 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 27 Jul 2012 18:47:21 +0000 Subject: ceres-solver_1.1.1-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: ceres-solver-doc_1.1.1-1_all.deb to main/c/ceres-solver/ceres-solver-doc_1.1.1-1_all.deb ceres-solver_1.1.1-1.debian.tar.gz to main/c/ceres-solver/ceres-solver_1.1.1-1.debian.tar.gz ceres-solver_1.1.1-1.dsc to main/c/ceres-solver/ceres-solver_1.1.1-1.dsc ceres-solver_1.1.1.orig.tar.gz to main/c/ceres-solver/ceres-solver_1.1.1.orig.tar.gz libceres-dev_1.1.1-1_amd64.deb to main/c/ceres-solver/libceres-dev_1.1.1-1_amd64.deb libceres1_1.1.1-1_amd64.deb to main/c/ceres-solver/libceres1_1.1.1-1_amd64.deb Changes: ceres-solver (1.1.1-1) unstable; urgency=low . * Initial release (Closes: #673238) Override entries for your package: ceres-solver-doc_1.1.1-1_all.deb - optional doc ceres-solver_1.1.1-1.dsc - source math libceres-dev_1.1.1-1_amd64.deb - optional libdevel libceres1_1.1.1-1_amd64.deb - optional libs Announcing to debian-devel-changes at lists.debian.org Closing bugs: 673238 Thank you for your contribution to Debian. From marco.mattiolo at hotmail.it Fri Jul 27 19:17:25 2012 From: marco.mattiolo at hotmail.it (Marco Mattiolo) Date: Fri, 27 Jul 2012 21:17:25 +0200 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: Il 25/07/2012 14:31, Jordi Guti?rrez Hermoso ha scritto: > If you want this to work for gnuplot, looks to me like you have to > file a bug with the ghostscript package to use a different default font. This was my first question http://lists.alioth.debian.org/pipermail/pkg-octave-devel/2012-July/009533.html I'm having some trouble with plotting in Octave on Wheezy, and cannot understand which package (octave, gnuplot, or one of their dependencies) is to blame. So thank you for answering it: ghostscript has changed the default font in octave+gnuplot upgrade from squeeze to wheezy. Il 25/07/2012 14:31, Jordi Guti?rrez Hermoso ha scritto: > I also don't use gnuplot to plot. Have you tried with the OpenGL backend? With graphics_toolkit("fltk") before starting andamenti_minimal.m, I get a wonderful output both on popup window and on png. But with the other file previously attached (andamenti_tensione_corrente.m), the popup window contains black rectangles and octave's memory consumption rises and I have to kill octave process before bricking the entire system, resulting in no png output. Marco From jordigh at octave.org Fri Jul 27 20:04:42 2012 From: jordigh at octave.org (=?UTF-8?Q?Jordi_Guti=C3=A9rrez_Hermoso?=) Date: Fri, 27 Jul 2012 16:04:42 -0400 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: On 27 July 2012 15:17, Marco Mattiolo wrote: > But with the other file previously attached (andamenti_tensione_corrente.m), > the popup window contains black rectangles and octave's memory consumption > rises and > I have to kill octave process before bricking the entire system, resulting > in no png output. Okay, this is a bug. I've reported it: https://savannah.gnu.org/bugs/?36980 Thanks for testing. - Jordi G. H. From dktrkranz at debian.org Fri Jul 27 21:10:10 2012 From: dktrkranz at debian.org (Luca Falavigna) Date: Fri, 27 Jul 2012 23:10:10 +0200 (CEST) Subject: Bug#683021: FTBFS on arm*: multiple definition of `typeinfo for FunctionParserBase::FunctionWrapper' Message-ID: <20120727211010.F0AC9540213@utumno> Source: fparser Version: 4.5-0.1 Severity: serious Justification: fails to build from source fparser fails to build from source on arm*, but built in the past: /bin/bash ./libtool --tag=CXX --mode=link g++ -g -O2 -release 4.3 -o libfparser.la -rpath /usr/lib fparser.lo fpoptimizer.lo libtool: link: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/arm-linux-gnueabi/4.6/../../../arm-linux-gnueabi/crti.o /usr/lib/gcc/arm-linux-gnueabi/4.6/crtbeginS.o .libs/fparser.o .libs/fpoptimizer.o -L/usr/lib/gcc/arm-linux-gnueabi/4.6 -L/usr/lib/gcc/arm-linux-gnueabi/4.6/../../../arm-linux-gnueabi -L/usr/lib/gcc/arm-linux-gnueabi/4.6/../../.. -L/lib/arm-linux-gnueabi -L/usr/lib/arm-linux-gnueabi -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/arm-linux-gnueabi/4.6/crtendS.o /usr/lib/gcc/arm-linux-gnueabi/4.6/../../../arm-linux-gnueabi/crtn.o -O2 -Wl,-soname -Wl,libfparser-4.3.so -o .libs/libfparser-4.3.so .libs/fpoptimizer.o:(.rodata+0x1b0c): multiple definition of `typeinfo name for FunctionParserBase::FunctionWrapper' .libs/fparser.o:(.rodata+0x1e8): first defined here .libs/fpoptimizer.o:(.data.rel.ro+0x0): multiple definition of `typeinfo for FunctionParserBase::FunctionWrapper' .libs/fparser.o:(.data.rel.ro+0x0): first defined here collect2: ld returned 1 exit status make[1]: *** [libfparser.la] Error 1 make[1]: Leaving directory `/build/buildd-fparser_4.5-0.1-armel-aHWgBY/fparser-4.5' dh_auto_build: make -j1 returned exit code 2 make: *** [build-arch] Error 2 https://buildd.debian.org/status/fetch.php?pkg=fparser&arch=armel&ver=4.5-0.1&stamp=1338356252 https://buildd.debian.org/status/fetch.php?pkg=fparser&arch=armhf&ver=4.5-0.1&stamp=1338357033 From mtmiller at ieee.org Fri Jul 27 21:46:57 2012 From: mtmiller at ieee.org (Mike Miller) Date: Fri, 27 Jul 2012 17:46:57 -0400 Subject: [Pkg-octave-devel] Wrong octave/gnuplot plot output In-Reply-To: References: Message-ID: On Fri, Jul 27, 2012 at 3:17 PM, Marco Mattiolo wrote: > Il 25/07/2012 14:31, Jordi Guti?rrez Hermoso ha scritto: > >> If you want this to work for gnuplot, looks to me like you have to file a >> bug with the ghostscript package to use a different default font. > > > This was my first question > http://lists.alioth.debian.org/pipermail/pkg-octave-devel/2012-July/009533.html > > I'm having some trouble with plotting in Octave on Wheezy, and cannot > understand which package (octave, gnuplot, or one of their dependencies) > is to blame. > > > So thank you for answering it: ghostscript has changed the default font > in octave+gnuplot upgrade from squeeze to wheezy. Not quite. Octave changed the way it specifies what "default font" means to the gnuplot backend, namely from specifying a default of "" to the string "{}". Refer to the bug report leading to that change [1], there was a good reason for it. IIRC what this ends up doing is making ghostscript now choose the default font rather than gnuplot. This is why Jordi points out it is ghostscript's default font that you have a problem with. If you generate an eps file instead of png you can compare the font selection directly in the files, you will see the difference. Added bonus, this takes ghostscript out of the equation. Also, go back to your squeeze system, try explictly setting your font name to "{}" or "NotARealFont" in Octave on your squeeze setup, and see what your resulting plots on screen and in png output look like. I bet you'll see the same as on wheezy. [1] https://savannah.gnu.org/bugs/index.php?32118 -- mike From ftpmaster at ftp-master.debian.org Fri Jul 27 22:12:46 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 27 Jul 2012 22:12:46 +0000 Subject: Processing of viennacl_1.2.0-2_amd64.changes Message-ID: viennacl_1.2.0-2_amd64.changes uploaded successfully to localhost along with the files: viennacl_1.2.0-2.dsc viennacl_1.2.0-2.debian.tar.gz libviennacl-dev_1.2.0-2_all.deb libviennacl-doc_1.2.0-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Fri Jul 27 22:17:54 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Fri, 27 Jul 2012 22:17:54 +0000 Subject: viennacl_1.2.0-2_amd64.changes ACCEPTED into unstable Message-ID: Accepted: libviennacl-dev_1.2.0-2_all.deb to contrib/v/viennacl/libviennacl-dev_1.2.0-2_all.deb libviennacl-doc_1.2.0-2_all.deb to contrib/v/viennacl/libviennacl-doc_1.2.0-2_all.deb viennacl_1.2.0-2.debian.tar.gz to contrib/v/viennacl/viennacl_1.2.0-2.debian.tar.gz viennacl_1.2.0-2.dsc to contrib/v/viennacl/viennacl_1.2.0-2.dsc Changes: viennacl (1.2.0-2) unstable; urgency=low . * [432b5df] Change debian branch to debian/1.2.0 * [815d6d8] Fix declaration order of prod_impl() and trans_prod_impl() - Added d/p/0004-Fix-declaration-order-of-prod_impl-trans_prod_impl.patch (Closes: 682410) Override entries for your package: libviennacl-dev_1.2.0-2_all.deb - extra contrib/libdevel libviennacl-doc_1.2.0-2_all.deb - extra contrib/doc viennacl_1.2.0-2.dsc - source contrib/science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 682410 Thank you for your contribution to Debian. From owner at bugs.debian.org Fri Jul 27 22:21:03 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Fri, 27 Jul 2012 22:21:03 +0000 Subject: Bug#682410: marked as done (viennacl: FTBFS in a minimal sid amd64 chroot) References: <20120722135954.14323.77090.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: Your message dated Fri, 27 Jul 2012 22:17:54 +0000 with message-id and subject line Bug#682410: fixed in viennacl 1.2.0-2 has caused the Debian Bug report #682410, regarding viennacl: FTBFS in a minimal sid amd64 chroot to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 682410: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682410 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Andreas Beckmann Subject: viennacl: FTBFS in a minimal sid amd64 chroot Date: Sun, 22 Jul 2012 15:59:54 +0200 Size: 23722 URL: -------------- next part -------------- An embedded message was scrubbed... From: Michael Wild Subject: Bug#682410: fixed in viennacl 1.2.0-2 Date: Fri, 27 Jul 2012 22:17:54 +0000 Size: 5288 URL: From raybuntu at googlemail.com Fri Jul 27 22:30:27 2012 From: raybuntu at googlemail.com (Radostan Riedel) Date: Sat, 28 Jul 2012 00:30:27 +0200 Subject: cctbx package In-Reply-To: <50128AF1.4080300@baptiste-carvello.net> References: <20120726211008.GA7881@gmail.com> <50128AF1.4080300@baptiste-carvello.net> Message-ID: <20120727223027.GB2531@gmail.com> On Fri, 27. Jul 14:34, Baptiste Carvello wrote: Hi Baptiste, don't forget to prepend yourself into "Uploaders" in debian/control. regards Radi From ucko at debian.org Fri Jul 27 22:41:36 2012 From: ucko at debian.org (Aaron M. Ucko) Date: Fri, 27 Jul 2012 18:41:36 -0400 Subject: Bug#683029: ceres-solver: FTBFS on i386, more?: several tests fail Message-ID: <20120727224136.18320.50630.reportbug@ghostwheel.internal.ucko.debian.net> Source: ceres-solver Version: 1.1.1-1 Severity: serious Justification: fails to build from source The automated build of ceres-solver on i386 failed with test suite errors stemming from a mix of heap corruption and numeric discrepancies: https://buildd.debian.org/status/fetch.php?pkg=ceres-solver&arch=i386&ver=1.1.1-1&stamp=1343417409 Other platforms may be affected as well. Could you please take a look? Thanks! From ucko at debian.org Fri Jul 27 23:07:30 2012 From: ucko at debian.org (Aaron M. Ucko) Date: Fri, 27 Jul 2012 19:07:30 -0400 Subject: Bug#683035: ceres-solver: FTBFS on non-Linux: errors compiling corrector_test.cc Message-ID: <20120727230730.18530.34599.reportbug@ghostwheel.internal.ucko.debian.net> Source: ceres-solver Version: 1.1.1-1 Severity: serious Justification: fails to build from source For some reason, the builds of ceres-solver on hurd-i386 and kfreebsd-i386 failed when they hit corrector_test.cc, somehow not honoring its scope declarations properly; the key errors have the form /.../ceres-solver-1.1.1/internal/ceres/corrector_test.cc:54:17: error: 'Corrector' was not declared in this scope /.../ceres-solver-1.1.1/internal/ceres/corrector_test.cc:54:17: note: suggested alternative: In file included from /.../ceres-solver-1.1.1/internal/ceres/corrector_test.cc:31:0: /.../ceres-solver-1.1.1/internal/ceres/corrector.h:49:7: note: 'ceres::internal::Corrector' I'm not sure what's going on here, or why it's specifically affecting that file or those platforms; a visit to upstream's source browser shows no obvious cause for concern, and moreover no platform-specific definitions that could make trouble. Could you please take a look? You can find the logs at https://buildd.debian.org/status/fetch.php?pkg=ceres-solver&arch=hurd-i386&ver=1.1.1-1&stamp=1343419060 https://buildd.debian.org/status/fetch.php?pkg=ceres-solver&arch=kfreebsd-i386&ver=1.1.1-1&stamp=1343416042 Thanks! From claims_dept_elgordo at live.com Sat Jul 28 00:05:07 2012 From: claims_dept_elgordo at live.com (claims_dept_elgordo at live.com) Date: Sat, 28 Jul 2012 02:05:07 +0200 Subject: FINAL NOTIFICATION Message-ID: <201207280005.q6S00J1R005417@mail.ucla.edu> Final Notification Your E-mail(ID)haS won ?500,000.00 Euros through an electronic ballot selection in the Elgordo Spanish International computer Programmed lottery.TCK:(SP/Lt.o489/851)/BTCH (ESP:LT.10/K205) For due remitance of funds contact Bank claims Agent below. Globanet Financial Servives. Dr.Carlos.Garcia.Rodriguez. EMAIL: global_net_org at aol.com Tel:+34-602-718-153 (1)Name(2) Sex (3)Age (4)Maritual Status (5)Residence (6)Tel.(7) Amount won Legalization of your CASH PRIZE is required before payment. Congratulation,once again! Mrs.Marisa Ana Prado publicity Secretary From ralph.ronnquist at gmail.com Sat Jul 28 01:27:07 2012 From: ralph.ronnquist at gmail.com (Ralph Ronnquist) Date: Sat, 28 Jul 2012 11:27:07 +1000 Subject: Bug#681646: Test example Message-ID: <50133FEB.8020705@gmail.com> The following is an example of this bug by a very small session, after having removed ~/.gnuplot_history before starting gnuplot. I have added my own numbering of the commands. -------------------- 1: gnuplot> a=5;plot x 2: gnuplot> plot x 3: gnuplot> history 1 history 4: gnuplot> plot x 5: gnuplot> plot x 6: gnuplot> plot 2*x 7: gnuplot> history 1 history 2 plot 2*x 3 history 8: gnuplot> plot x 9: gnuplot> q -------------------- Command #1 was typed as is. Command #2 was obtained by up-arrow, 6*left-arrow, 4*rubout, enter. Command #3 was typed as is; before typing, up-arrow recall showed me command #1 and not #2. But neither are in the history (file). Command #4 was typed as is; recall before typing showed #3 and #1, not #2. Command #5 was typed as is; recall before typing shows #3 and #1, not #2 or #4. Command #6 was typed as is; recall before typing shows #3 and #1, not #2, #4 or #5. Command #7 was typed as is; recall before typing shows #6, #3 and #1, not #2, #4 or #5. Command #8 was typed as is; recall before typing shows #7, #6, #3 and #1, not #2, #4 or #5. Command #9 was typed as is; recall before typing shows #7, #6, #3 and #1, not #2, #4, #5 or #8. From owner at bugs.debian.org Sat Jul 28 03:48:03 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 28 Jul 2012 03:48:03 +0000 Subject: Processed: tagging 682411 References: <1343447053-3758-bts-treinen@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > tags 682411 + patch Bug #682411 [worldwind] worldwind: FTBFS in sid Added tag(s) patch. > thanks Stopping processing here. Please contact me if you need assistance. -- 682411: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682411 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From treinen at free.fr Sat Jul 28 03:49:45 2012 From: treinen at free.fr (Ralf Treinen) Date: Sat, 28 Jul 2012 05:49:45 +0200 Subject: Bug#682411: worldwind: FTBFS in sid Message-ID: <20120728034945.GD2160@free.fr> Patch for the FTBFS: --- worldwind-0.5.0/debian/rules +++ worldwind-0.5.0/debian/rules @@ -6,7 +6,8 @@ include /usr/share/cdbs/1/rules/patchsys-quilt.mk # This software doesn't compile (at the moment) with gcj -JAVA_HOME := /usr/lib/jvm/java-6-openjdk/ +BUILDARCH ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH) +JAVA_HOME = /usr/lib/jvm/java-6-openjdk-$(BUILDARCH)/ DEB_JARS := ant-nodeps jogl gluegen-rt DEB_ANT_BUILD_TARGET := build DEB_ANT_CLEAN_TARGET := clean.all -Ralf. From kazeemadams101 at gmail.com Sat Jul 28 02:55:30 2012 From: kazeemadams101 at gmail.com (Kazeem Adams) Date: Sat, 28 Jul 2012 10:55:30 +0800 Subject: I NEED YOUR KIND ASSIATANCE Message-ID: -- *Good day Sir/Madam,* * I'm Kazeem Adams and I work with a Fiscal Institution here in Asia. We had a customer and mogul by name Badri Patarkatsishvili from Georgia, who had a balance of $18,200,000.00usd before he died of a heart condition and since then, our office have been expecting his family member(s) for the heritage of the deposit, but none has surfaced and the account has been tagged for dormancy.** **The policy of our fiscal institution however stipulates a limited time period for such heritage to be made or the finances' will be written off going by the record of the incident, the time limit for the claim is closing up soon for the next of kin to show up or the account will be closed and i came to have the knowledge of this account as the auditor in this fiscal institution. So if you are interested kindly reply me to furnish you with more details.* * ** Kind Regards**,** Kazeem Adams.* -------------- next part -------------- An HTML attachment was scrubbed... URL: From ftpmaster at ftp-master.debian.org Sat Jul 28 08:52:59 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sat, 28 Jul 2012 08:52:59 +0000 Subject: Bug#683040: Removed package(s) from unstable Message-ID: We believe that the bug you reported is now fixed; the following package(s) have been removed from unstable: ceres-solver | 1.1.1-1 | source ceres-solver-doc | 1.1.1-1 | all libceres-dev | 1.1.1-1 | amd64, powerpc libceres1 | 1.1.1-1 | amd64, powerpc ------------------- Reason ------------------- ROM; FTBFS ---------------------------------------------- Note that the package(s) have simply been removed from the tag database and may (or may not) still be in the pool; this is not a bug. The package(s) will be physically removed automatically when no suite references them (and in the case of source, when no binary references it). Please also remember that the changes have been done on the master archive and will not propagate to any mirrors (ftp.debian.org included) until the next dinstall run at the earliest. Packages are usually not removed from testing by hand. Testing tracks unstable and will automatically remove packages which were removed from unstable when removing them from testing causes no dependency problems. The release team can force a removal from testing if it is really needed, please contact them if this should be the case. We try to close Bugs which have been reported against this package automatically. But please check all old bugs, if they where closed correctly or should have been re-assign to another package. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 683040 at bugs.debian.org. The full log for this bug can be viewed at http://bugs.debian.org/683040 This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster at debian.org. Debian distribution maintenance software pp. Luca Falavigna (the ftpmaster behind the curtain) From ftpmaster at ftp-master.debian.org Sat Jul 28 08:53:03 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sat, 28 Jul 2012 08:53:03 +0000 Subject: Bug#683040: Removed package(s) from unstable Message-ID: Version: 1.1.1-1+rm Dear submitter, as the package ceres-solver has just been removed from the Debian archive unstable we hereby close the associated bug reports. We are sorry that we couldn't deal with your issue properly. For details on the removal, please see http://bugs.debian.org/683040 The version of this package that was in Debian prior to this removal can still be found using http://snapshot.debian.org/. This message was generated automatically; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster at debian.org. Debian distribution maintenance software pp. Luca Falavigna (the ftpmaster behind the curtain) From owner at bugs.debian.org Sat Jul 28 08:54:13 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 28 Jul 2012 08:54:13 +0000 Subject: Bug#683029: marked as done (ceres-solver: FTBFS on i386, more?: several tests fail) References: <20120727224136.18320.50630.reportbug@ghostwheel.internal.ucko.debian.net> Message-ID: Your message dated Sat, 28 Jul 2012 08:53:03 +0000 with message-id and subject line Bug#683040: Removed package(s) from unstable has caused the Debian Bug report #683029, regarding ceres-solver: FTBFS on i386, more?: several tests fail to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 683029: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683029 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: "Aaron M. Ucko" Subject: ceres-solver: FTBFS on i386, more?: several tests fail Date: Fri, 27 Jul 2012 18:41:36 -0400 Size: 2481 URL: -------------- next part -------------- An embedded message was scrubbed... From: Debian FTP Masters Subject: Bug#683040: Removed package(s) from unstable Date: Sat, 28 Jul 2012 08:53:03 +0000 Size: 2427 URL: From owner at bugs.debian.org Sat Jul 28 08:54:15 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sat, 28 Jul 2012 08:54:15 +0000 Subject: Bug#683035: marked as done (ceres-solver: FTBFS on non-Linux: errors compiling corrector_test.cc) References: <20120727230730.18530.34599.reportbug@ghostwheel.internal.ucko.debian.net> Message-ID: Your message dated Sat, 28 Jul 2012 08:53:03 +0000 with message-id and subject line Bug#683040: Removed package(s) from unstable has caused the Debian Bug report #683035, regarding ceres-solver: FTBFS on non-Linux: errors compiling corrector_test.cc to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 683035: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683035 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: "Aaron M. Ucko" Subject: ceres-solver: FTBFS on non-Linux: errors compiling corrector_test.cc Date: Fri, 27 Jul 2012 19:07:30 -0400 Size: 3914 URL: -------------- next part -------------- An embedded message was scrubbed... From: Debian FTP Masters Subject: Bug#683040: Removed package(s) from unstable Date: Sat, 28 Jul 2012 08:53:03 +0000 Size: 2427 URL: From web.offer.66663153 at att.net Sun Jul 29 01:44:42 2012 From: web.offer.66663153 at att.net (Mr. David) Date: Sat, 28 Jul 2012 18:44:42 -0700 (PDT) Subject: No subject Message-ID: <1343526282.67166.YahooMailClassic@web184404.mail.bf1.yahoo.com> Do you need a loan? if yes, contact us for more info. -------------- next part -------------- An HTML attachment was scrubbed... URL: From skirpichev at gmail.com Sun Jul 29 09:23:34 2012 From: skirpichev at gmail.com (Sergey B Kirpichev) Date: Sun, 29 Jul 2012 13:23:34 +0400 Subject: Bug#682273: libnlopt0: new upstream release (2.3) Message-ID: <20120729092334.GA21506@darkstar.order.hcn-strela.ru> FYI, new upstream release is included in my original packaging effort: http://mentors.debian.net/package/nlopt From themiwi at users.sourceforge.net Sun Jul 29 12:29:56 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Sun, 29 Jul 2012 12:29:56 +0000 Subject: Bug#683175: libfreefoam-dev: Template files /usr/share/freefoam/data/templates/* should be in /usr/share/freefoam/templates Message-ID: <20120729122956.26608.58298.reportbug@localhost6.localdomain6> Package: libfreefoam-dev Version: 0.1.0-1 Severity: normal Tags: upstream patch Dear Maintainer, The source template files in /usr/share/freefoam/data/templates/* should actually be installed into /usr/share/freefoam/templates, where /usr/share/freefoam/utilities/foamNew expects them to be. This is a problem in the build system and is fixed by the upstream commit http://repo.or.cz/w/freefoam.git?a=commit;h=97511926f09c0fe720ed61bb1ced5acfd38c73bb -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages libfreefoam-dev depends on: ii libfreefoam 0.1.0-1 ii python 2.7.3-1 libfreefoam-dev recommends no packages. libfreefoam-dev suggests no packages. -- no debconf information -------------- next part -------------- A non-text attachment was scrubbed... Name: fix-Installation-dirs-for-AsciiDoc-XHTML-UserGuide-and-template-files.diff Type: text/x-diff Size: 3477 bytes Desc: not available URL: From owner at bugs.debian.org Sun Jul 29 12:39:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 29 Jul 2012 12:39:06 +0000 Subject: Processed: block 679762 with 680931 References: <1343563017-2622-bts-fgeyer@debian.org> Message-ID: Processing commands for control at bugs.debian.org: > block 679762 with 680931 Bug #679762 [src:dolfin] dolfin: FTBFS: Armadillo could not be found. Be sure to set ARMADILLO_DIR. (missing: ARMADILLO_TEST_RUNS) 679762 was not blocked by any bugs. 679762 was not blocking any bugs. Added blocking bug(s) of 679762: 680931 > thanks Stopping processing here. Please contact me if you need assistance. -- 679762: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679762 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From themiwi at users.sourceforge.net Sun Jul 29 12:43:15 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Sun, 29 Jul 2012 12:43:15 +0000 Subject: Bug#683176: freefoam: The /usr/share/freefoam/data/foamLog.db is in the wrong place and package Message-ID: <20120729124315.26921.10104.reportbug@localhost6.localdomain6> Package: freefoam Version: 0.1.0-1 Severity: normal Tags: upstream Dear Maintainer, Related to #683175, the file /usr/share/freefoam/data/foamLog.db should be installed into /usr/share/freefoam/foamLog.db where the freefoam-log utility expects it to be. This is a problem in the build system and fixed by the commit http://repo.or.cz/w/freefoam.git?a=commit;h=97511926f09c0fe720ed61bb1ced5acfd38c73bb The second issue is that the file should be in the freefoam binary package, not libfreefoam-dev as it is required by the freefoam-log utility to run. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages freefoam depends on: ii libc6 2.13-34 ii libfreefoam 0.1.0-1 ii libgcc1 1:4.7.1-5 ii libreadline6 6.2-8 ii libstdc++6 4.7.1-5 ii mpi-default-bin 1.0.1 ii python 2.7.3-1 ii tcsh [c-shell] 6.18.01-2 ii zlib1g 1:1.2.7.dfsg-13 freefoam recommends no packages. freefoam suggests no packages. -- no debconf information From owner at bugs.debian.org Sun Jul 29 12:51:06 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 29 Jul 2012 12:51:06 +0000 Subject: Processed: Blocking 683176 by 683175 References: <50153101.3050904@users.sourceforge.net> Message-ID: Processing commands for control at bugs.debian.org: > block 683176 by 683175 Bug #683176 [freefoam] freefoam: The /usr/share/freefoam/data/foamLog.db is in the wrong place and package 683176 was not blocked by any bugs. 683176 was not blocking any bugs. Added blocking bug(s) of 683176: 683175 > thanks Stopping processing here. Please contact me if you need assistance. -- 683176: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683176 Debian Bug Tracking System Contact owner at bugs.debian.org with problems From ftpmaster at ftp-master.debian.org Sun Jul 29 20:27:11 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 29 Jul 2012 20:27:11 +0000 Subject: Processing of worldwind_0.5.0-9_amd64.changes Message-ID: worldwind_0.5.0-9_amd64.changes uploaded successfully to localhost along with the files: worldwind_0.5.0-9.dsc worldwind_0.5.0-9.diff.gz worldwind_0.5.0-9_all.deb libworldwind-java_0.5.0-9_all.deb worldwind-doc_0.5.0-9_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Sun Jul 29 20:47:53 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Sun, 29 Jul 2012 20:47:53 +0000 Subject: worldwind_0.5.0-9_amd64.changes ACCEPTED into unstable Message-ID: Accepted: libworldwind-java_0.5.0-9_all.deb to non-free/w/worldwind/libworldwind-java_0.5.0-9_all.deb worldwind-doc_0.5.0-9_all.deb to non-free/w/worldwind/worldwind-doc_0.5.0-9_all.deb worldwind_0.5.0-9.diff.gz to non-free/w/worldwind/worldwind_0.5.0-9.diff.gz worldwind_0.5.0-9.dsc to non-free/w/worldwind/worldwind_0.5.0-9.dsc worldwind_0.5.0-9_all.deb to non-free/w/worldwind/worldwind_0.5.0-9_all.deb Changes: worldwind (0.5.0-9) unstable; urgency=low . * Team upload * debian/rules: use the build-architecture to determine the correct value of JAVA_HOME (closes: #682411) Override entries for your package: libworldwind-java_0.5.0-9_all.deb - optional non-free/java worldwind-doc_0.5.0-9_all.deb - optional non-free/doc worldwind_0.5.0-9.dsc - source non-free/science worldwind_0.5.0-9_all.deb - optional non-free/science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 682411 Thank you for your contribution to Debian. From owner at bugs.debian.org Sun Jul 29 20:51:07 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Sun, 29 Jul 2012 20:51:07 +0000 Subject: Bug#682411: marked as done (worldwind: FTBFS in sid) References: <20120722140332.5353.21346.reportbug@cake.ae.cs.uni-frankfurt.de> Message-ID: Your message dated Sun, 29 Jul 2012 20:47:53 +0000 with message-id and subject line Bug#682411: fixed in worldwind 0.5.0-9 has caused the Debian Bug report #682411, regarding worldwind: FTBFS in sid to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 682411: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682411 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Andreas Beckmann Subject: worldwind: FTBFS in sid Date: Sun, 22 Jul 2012 16:03:32 +0200 Size: 14847 URL: -------------- next part -------------- An embedded message was scrubbed... From: Ralf Treinen Subject: Bug#682411: fixed in worldwind 0.5.0-9 Date: Sun, 29 Jul 2012 20:47:53 +0000 Size: 4751 URL: From sylvestre at debian.org Sun Jul 29 21:03:23 2012 From: sylvestre at debian.org (Sylvestre Ledru) Date: Sun, 29 Jul 2012 23:03:23 +0200 Subject: Bug#682907: World Wind 1.4 is available In-Reply-To: <20120726231636.18737.38620.reportbug@localhost> References: <20120726231636.18737.38620.reportbug@localhost> Message-ID: <5015A51B.6000108@debian.org> Le 27/07/2012 01:16, Sebastian Ramacher a ?crit : > Please package the new World Wind release. wahou :| I packaged the last release (0.5) in May 2008 :) However, looks like it is going to take sometime. Upstream zip is a mess: * mix of sources and package * lot of dependencies [1] * plenty of various native libs [2] * various other issues If you want to give it a try, you are welcome. I might take sometime to package it but, as it is a non-free package, I don't have much interest in it. Sylvestre [1] ./build/lib/batik/lib/batik-parser.jar ./build/lib/batik/lib/batik-gvt.jar ./build/lib/batik/lib/xalan-2.6.0.jar ./build/lib/batik/lib/pdf-transcoder.jar ./build/lib/batik/lib/batik-util.jar ./build/lib/batik/lib/batik-swing.jar ./build/lib/batik/lib/batik-gui-util.jar ./build/lib/batik/lib/batik-script.jar ./build/lib/batik/lib/batik-dom.jar ./build/lib/batik/lib/batik-extension.jar ./build/lib/batik/lib/xml-apis-ext.jar ./build/lib/batik/lib/batik-awt-util.jar ./build/lib/batik/lib/batik-svggen.jar ./build/lib/batik/lib/batik-xml.jar ./build/lib/batik/lib/batik-css.jar ./build/lib/batik/lib/xml-apis.jar ./build/lib/batik/lib/batik-anim.jar ./build/lib/batik/lib/batik-ext.jar ./build/lib/batik/lib/batik-svg-dom.jar ./build/lib/batik/lib/batik-bridge.jar ./build/lib/batik/lib/batik-codec.jar ./build/lib/batik/lib/batik-transcoder.jar ./build/lib/batik/lib/xerces_2_5_0.jar ./build/lib/batik/lib/js.jar ./build/lib/batik/batik-rasterizer.jar ./build/lib/junit-4.5.jar ./build/lib/worldwind-buildutil.jar [2] $ ls -1 *.so *.jnilib *.dll gluegen-rt.dll jogl_awt.dll jogl_cg.dll jogl.dll libgluegen-rt.jnilib libgluegen-rt.so libjogl_awt.jnilib libjogl_awt.so libjogl_cg.jnilib libjogl_cg.so libjogl.jnilib libjogl.so libwebview.jnilib WebView32.dll WebView64.dll From ftpmaster at debian.org Sun Jul 29 21:34:56 2012 From: ftpmaster at debian.org (Luca Falavigna) Date: Sun, 29 Jul 2012 21:34:56 +0000 Subject: Comments regarding herwig++_2.6.0-1_amd64.changes Message-ID: Hi, one of our tireless trainees have some questions about your package: - The binary package "herwig++" contains 39 MB of shared libraries, and only one 40 kB executable named "Herwig++". The libs should go into a binary package named "libherwig++". The source package also creates a herwig++-dev package, which should be renamed libherwig++-dev. However, there are many shared libraries in this package, all with different sonames. - The herwig++-dev package doesn't contain static libraries, only header files, but is Architecture: any. - The executable Herwig++ does not link directly to the shared libraries, but loads them dynamically, so maybe they are meant to be plugins instead of shared libraries. Are the shared libs meant to be used by anything other than the Herwig++ executable? If not, there is no need for the herwig++-dev package, and then also the current binary package herwig++ would make more sense. - debian/copyright fails to mention "Copyright (C) 2008-2011 Simon Platzer -- simon.plaetzer at desy.de" that is in many files in Exsample2/exsample/. He is also mentioned in many files in MatrixElement/Matchbox/ in the comments above functions. - debian/copyright lists all individual authors, but many source files are "Copyright (C) 2002-2011 The Herwig Collaboration". - The long description is very short on details, even for high energy physicists I think. In any case, the description of the original HERWIG program is: "HERWIG is a Monte Carlo package for simulating Hadron Emission Reactions With Interfering Gluons". Perhaps even better would be to write something similar to the abstract of http://arxiv.org/abs/0803.0883. Cheers, Luca From mbanck at debian.org Sun Jul 29 23:40:49 2012 From: mbanck at debian.org (Michael Banck) Date: Mon, 30 Jul 2012 01:40:49 +0200 Subject: Bug#683226: mpich2: Segfaults if ssh is not available Message-ID: <20120729234049.GA2919@nighthawk.chemicalconnection.dyndns.org> Package: mpich2 Version: 1.4.1-4 Severity: important Tags: patch In a minimal unstable chroot, after installing mpich2 with --no-install-recommends: nighthawk:/tmp# mpirun /bin/true Segmentation fault nighthawk:/tmp# apt-get install --no-install-recommends openssh-client [...] nighthawk:/tmp# mpirun /bin/true nighthawk:/tmp# echo $? 0 nighthawk:/tmp# mv /usr/bin/ssh{,_} nighthawk:/tmp# mpirun /bin/true Segmentation fault nighthawk:/tmp# This also makes mpi-default enabled packages on MPICH architectures segfault in test suites, see e.g. (grep for "1.1.1.1" or "Segmentation fault"): https://buildd.debian.org/status/fetch.php?pkg=aces3&arch=mips&ver=3.0.6-5&stamp=1342693895 Not sure whether it would help the test suite, but this seems to be a known bug (http://trac.mcs.anl.gov/projects/mpich2/ticket/1576) with a known fix: http://trac.mcs.anl.gov/projects/mpich2/changeset/9543 I have not tested this patch. Michael -- System Information: Debian Release: 6.0.2 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash From mbanck at debian.org Mon Jul 30 00:02:50 2012 From: mbanck at debian.org (Michael Banck) Date: Mon, 30 Jul 2012 02:02:50 +0200 Subject: Bug#683226: mpich2: Segfaults if ssh is not available In-Reply-To: <20120729234049.GA2919@nighthawk.chemicalconnection.dyndns.org> References: <20120729234049.GA2919@nighthawk.chemicalconnection.dyndns.org> Message-ID: <20120730000250.GJ23457@nighthawk.chemicalconnection.dyndns.org> On Mon, Jul 30, 2012 at 01:40:49AM +0200, Michael Banck wrote: > nighthawk:/tmp# mpirun /bin/true > Segmentation fault I forgot to mention the backtrace: #0 0x00421020 in HYDU_get_abs_wd () No symbol table info available. #1 0x0042127c in HYDU_find_in_path () No symbol table info available. #2 0x00421d48 in HYDU_find_full_path () No symbol table info available. #3 0x004398a0 in HYDT_bscd_common_launch_procs () No symbol table info available. #4 0x0042e310 in HYDT_bsci_launch_procs () No symbol table info available. #5 0x0040b630 in ?? () No symbol table info available. > Not sure whether it would help the test suite, but this seems to be a > known bug (http://trac.mcs.anl.gov/projects/mpich2/ticket/1576) To make it clear that this is indeed apparently the above bug report. Michael From mbanck at debian.org Mon Jul 30 00:35:00 2012 From: mbanck at debian.org (Michael Banck) Date: Mon, 30 Jul 2012 02:35:00 +0200 Subject: Bug#683226: mpich2: Segfaults if ssh is not available In-Reply-To: <20120730000250.GJ23457@nighthawk.chemicalconnection.dyndns.org> References: <20120729234049.GA2919@nighthawk.chemicalconnection.dyndns.org> <20120730000250.GJ23457@nighthawk.chemicalconnection.dyndns.org> Message-ID: <20120730003500.GK23457@nighthawk.chemicalconnection.dyndns.org> Hi, On Mon, Jul 30, 2012 at 02:02:50AM +0200, Michael Banck wrote: > On Mon, Jul 30, 2012 at 01:40:49AM +0200, Michael Banck wrote: > > nighthawk:/tmp# mpirun /bin/true > > Segmentation fault I have rebuilt mpich2 with the patch I mentioned and now it no longer segfaults: Preparing to replace mpich2 1.4.1-4 (using .../tmp/mpich2_1.4.1-4.1_amd64.deb) ... Unpacking replacement mpich2 ... Preparing to replace libmpich2-3 1.4.1-4 (using .../libmpich2-3_1.4.1-4.1_amd64.deb) ... Unpacking replacement libmpich2-3 ... Setting up libmpich2-3 (1.4.1-4.1) ... Setting up mpich2 (1.4.1-4.1) ... (unstable-amd64-sbuild)root at hartree:/home/mba/build# mpirun /bin/true (unstable-amd64-sbuild)root at hartree:/home/mba/build# echo $? 0 [...] dpkg: warning: downgrading mpich2 from 1.4.1-4.1 to 1.4.1-4 (Reading database ... 11856 files and directories currently installed.) Preparing to replace mpich2 1.4.1-4.1 (using .../mpich2_1.4.1-4_amd64.deb) ... Unpacking replacement mpich2 ... dpkg: warning: downgrading libmpich2-3 from 1.4.1-4.1 to 1.4.1-4 Preparing to replace libmpich2-3 1.4.1-4.1 (using .../libmpich2-3_1.4.1-4_amd64.deb) ... Unpacking replacement libmpich2-3 ... Setting up libmpich2-3 (1.4.1-4) ... Setting up mpich2 (1.4.1-4) ... (unstable-amd64-sbuild)root at hartree:/home/mba/build# mpirun /bin/true Segmentation fault The patch is attached. Cheers, Michael -------------- next part -------------- A non-text attachment was scrubbed... Name: mpich2-1.4.1.patch Type: text/x-diff Size: 288 bytes Desc: not available URL: From dylynahwf at yahoo.com Mon Jul 30 02:06:28 2012 From: dylynahwf at yahoo.com (=?GB2312?B?t72x47/svd2w7MDto6E=?=) Date: Mon, 30 Jul 2012 10:06:28 +0800 Subject: lg-001329@163.comzmfp Message-ID: <201207301006287508701@yahoo.com> An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Gsq8681.jpg Type: image/pjpeg Size: 16643 bytes Desc: not available URL: From lifongsun at gmail.com Mon Jul 30 02:07:04 2012 From: lifongsun at gmail.com (Lifeng Sun) Date: Mon, 30 Jul 2012 10:07:04 +0800 Subject: Comments regarding herwig++_2.6.0-1_amd64.changes In-Reply-To: References: Message-ID: <20120730020704.GA13537@string> Hi, On 21:34 Sun 07/29/12 Jul , Luca Falavigna wrote: > one of our tireless trainees have some questions about your package: > > - The binary package "herwig++" contains 39 MB of shared libraries, > and only one 40 kB executable named "Herwig++". The libs should go > into a binary package named "libherwig++". The source package also > creates a herwig++-dev package, which should be renamed > libherwig++-dev. However, there are many shared libraries in this > package, all with different sonames. The shared libraries in the binary "herwig++" package are all plugins of the executable Herwig++ program, so it makes sense to ship them in "herwig++" binary package. > - The herwig++-dev package doesn't contain static libraries, only > header files, but is Architecture: any. it's not a sufficient reason to declare a package "Architecture: all" if it contains only header files, some header files might be arch-dep, e.g. config.h generated by autotools. In this package, although likely all header files are arch-indep, the "herwig-config" script is arch-dep (I admit it's quite easy to make it arch-indep). > - The executable Herwig++ does not link directly to the shared > libraries, but loads them dynamically, so maybe they are meant to > be plugins instead of shared libraries. Are the shared libs meant > to be used by anything other than the Herwig++ executable? If not, > there is no need for the herwig++-dev package, and then also the > current binary package herwig++ would make more sense. no, they are not designed for anything other than the Herwig++ executable program. On the other hand, the header files in herwig++-dev package is used for Herwig++ plugin development. Herwig++ plugins link against libThePEG (that's why the package depends on libthepeg-dev) and dynamically load other Herwig++ plugins. > - debian/copyright fails to mention "Copyright (C) 2008-2011 Simon > Platzer -- simon.plaetzer at desy.de" that is in many files in > Exsample2/exsample/. He is also mentioned in many files in > MatrixElement/Matchbox/ in the comments above functions. "Simon Platzer" is mentioned as "Simon Pl?tzer" in debian/copyright. > - debian/copyright lists all individual authors, but many source > files are "Copyright (C) 2002-2011 The Herwig Collaboration". will fix. > - The long description is very short on details, even for high > energy physicists I think. In any case, the description of the > original HERWIG program is: "HERWIG is a Monte Carlo package for > simulating Hadron Emission Reactions With Interfering > Gluons". Perhaps even better would be to write something similar > to the abstract of http://arxiv.org/abs/0803.0883. Herwig++ is a C++ re-written of HERWIG, which is a well-known package in high energy physics community for decades. If HERWIG does not ring any bell for one, the package is not likely for him/her. I will extend the description as you wish, however. Thank you for the comments, Lifeng -- From balaji at mcs.anl.gov Mon Jul 30 05:06:21 2012 From: balaji at mcs.anl.gov (Pavan Balaji) Date: Mon, 30 Jul 2012 00:06:21 -0500 Subject: Bug#683226: mpich2: Segfaults if ssh is not available In-Reply-To: <20120730003500.GK23457@nighthawk.chemicalconnection.dyndns.org> References: <20120729234049.GA2919@nighthawk.chemicalconnection.dyndns.org> <20120730000250.GJ23457@nighthawk.chemicalconnection.dyndns.org> <20120730003500.GK23457@nighthawk.chemicalconnection.dyndns.org> Message-ID: <5016164D.8040707@mcs.anl.gov> Thanks for the bug report, Michael. This was already fixed in the MPICH2 trunk, but perhaps after 1.4.1p1 was released. In any case, it should appear in the next release -- mpich2-1.5. -- Pavan On 07/29/2012 07:35 PM, Michael Banck wrote: > Hi, > > On Mon, Jul 30, 2012 at 02:02:50AM +0200, Michael Banck wrote: >> On Mon, Jul 30, 2012 at 01:40:49AM +0200, Michael Banck wrote: >>> nighthawk:/tmp# mpirun /bin/true >>> Segmentation fault > > I have rebuilt mpich2 with the patch I mentioned and now it no longer > segfaults: > > Preparing to replace mpich2 1.4.1-4 (using > .../tmp/mpich2_1.4.1-4.1_amd64.deb) ... > Unpacking replacement mpich2 ... > Preparing to replace libmpich2-3 1.4.1-4 (using > .../libmpich2-3_1.4.1-4.1_amd64.deb) ... > Unpacking replacement libmpich2-3 ... > Setting up libmpich2-3 (1.4.1-4.1) ... > Setting up mpich2 (1.4.1-4.1) ... > (unstable-amd64-sbuild)root at hartree:/home/mba/build# mpirun /bin/true > (unstable-amd64-sbuild)root at hartree:/home/mba/build# echo $? > 0 > [...] > dpkg: warning: downgrading mpich2 from 1.4.1-4.1 to 1.4.1-4 > (Reading database ... 11856 files and directories currently installed.) > Preparing to replace mpich2 1.4.1-4.1 (using > .../mpich2_1.4.1-4_amd64.deb) ... > Unpacking replacement mpich2 ... > dpkg: warning: downgrading libmpich2-3 from 1.4.1-4.1 to 1.4.1-4 > Preparing to replace libmpich2-3 1.4.1-4.1 (using > .../libmpich2-3_1.4.1-4_amd64.deb) ... > Unpacking replacement libmpich2-3 ... > Setting up libmpich2-3 (1.4.1-4) ... > Setting up mpich2 (1.4.1-4) ... > (unstable-amd64-sbuild)root at hartree:/home/mba/build# mpirun /bin/true > Segmentation fault > > The patch is attached. > > > Cheers, > > Michael > -- Pavan Balaji http://www.mcs.anl.gov/~balaji From brlink at debian.org Mon Jul 30 07:10:50 2012 From: brlink at debian.org (Bernhard R. Link) Date: Mon, 30 Jul 2012 09:10:50 +0200 Subject: Comments regarding herwig++_2.6.0-1_amd64.changes In-Reply-To: <20120730020704.GA13537@string> References: <20120730020704.GA13537@string> Message-ID: <20120730071042.GA23468@client.brlink.eu> * Lifeng Sun [120730 04:07]: > > - The herwig++-dev package doesn't contain static libraries, only > > header files, but is Architecture: any. > > it's not a sufficient reason to declare a package "Architecture: all" > if it contains only header files, some header files might be arch-dep, In case someone reads this thread when looking for information about libraries: Also consider the .so symlinks to libraries. They can easily be architecture dependent (and usually definitely are once the package is multiarchified). > e.g. config.h generated by autotools. Having a config.h in the header files is quite a problem on its own. Apart from namespace issues (those files will usually have identifiers that clash with configure headers in programs using those options), they can easily be no longer fitting to the machine they are thus exported. (But yes, especially scientific software is usually so full of problems that one cannot fix them all). Bernhard R. Link From mbanck at debian.org Mon Jul 30 09:32:00 2012 From: mbanck at debian.org (Michael Banck) Date: Mon, 30 Jul 2012 11:32:00 +0200 Subject: Bug#683226: mpich2: Segfaults if ssh is not available In-Reply-To: <5016164D.8040707@mcs.anl.gov> References: <20120729234049.GA2919@nighthawk.chemicalconnection.dyndns.org> <20120730000250.GJ23457@nighthawk.chemicalconnection.dyndns.org> <20120730003500.GK23457@nighthawk.chemicalconnection.dyndns.org> <5016164D.8040707@mcs.anl.gov> Message-ID: <20120730093200.GL23457@nighthawk.chemicalconnection.dyndns.org> Hi, On Mon, Jul 30, 2012 at 12:06:21AM -0500, Pavan Balaji wrote: > Thanks for the bug report, Michael. This was already fixed in the > MPICH2 trunk, but perhaps after 1.4.1p1 was released. In any case, > it should appear in the next release -- mpich2-1.5. Indeed, but as Debian is frozen I think applying this patch to 1.4.1 and asking for an unblock by the release team is warranted. The alternative would be to add openssh-client to mpich2's Depends (and similarily ask for a freeze exception). Also, I wonder whether this bug should be release critical as it pretty much renders mpich2 useless unless an additional undeclared package (openssh-client) is installed. Michael From ftpmaster at ftp-master.debian.org Mon Jul 30 13:43:23 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 30 Jul 2012 13:43:23 +0000 Subject: Processing of scirenderer_0.5.2-1_i386.changes Message-ID: scirenderer_0.5.2-1_i386.changes uploaded successfully to localhost along with the files: scirenderer_0.5.2-1.dsc scirenderer_0.5.2.orig.tar.gz scirenderer_0.5.2-1.debian.tar.gz libscirenderer-java_0.5.2-1_all.deb libscirenderer-java-doc_0.5.2-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Mon Jul 30 13:47:32 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 30 Jul 2012 13:47:32 +0000 Subject: scirenderer_0.5.2-1_i386.changes ACCEPTED into experimental Message-ID: Accepted: libscirenderer-java-doc_0.5.2-1_all.deb to main/s/scirenderer/libscirenderer-java-doc_0.5.2-1_all.deb libscirenderer-java_0.5.2-1_all.deb to main/s/scirenderer/libscirenderer-java_0.5.2-1_all.deb scirenderer_0.5.2-1.debian.tar.gz to main/s/scirenderer/scirenderer_0.5.2-1.debian.tar.gz scirenderer_0.5.2-1.dsc to main/s/scirenderer/scirenderer_0.5.2-1.dsc scirenderer_0.5.2.orig.tar.gz to main/s/scirenderer/scirenderer_0.5.2.orig.tar.gz Changes: scirenderer (0.5.2-1) experimental; urgency=low . * New upstream release Override entries for your package: libscirenderer-java-doc_0.5.2-1_all.deb - optional doc libscirenderer-java_0.5.2-1_all.deb - optional java scirenderer_0.5.2-1.dsc - source java Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From noreply at release.debian.org Mon Jul 30 16:39:16 2012 From: noreply at release.debian.org (Debian testing watch) Date: Mon, 30 Jul 2012 16:39:16 +0000 Subject: r-cran-msm 1.1-1 MIGRATED to testing Message-ID: FYI: The status of the r-cran-msm source package in Debian's testing distribution has changed. Previous version: 1.0-1 Current version: 1.1-1 -- This email is automatically generated once a day. As the installation of new packages into testing happens multiple times a day you will receive later changes on the next day. See http://release.debian.org/testing-watch/ for more information. From ftpmaster at ftp-master.debian.org Mon Jul 30 19:53:56 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 30 Jul 2012 19:53:56 +0000 Subject: Processing of worldwind_0.5.0-10_amd64.changes Message-ID: worldwind_0.5.0-10_amd64.changes uploaded successfully to localhost along with the files: worldwind_0.5.0-10.dsc worldwind_0.5.0-10.diff.gz worldwind_0.5.0-10_all.deb libworldwind-java_0.5.0-10_all.deb worldwind-doc_0.5.0-10_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Mon Jul 30 20:50:19 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 30 Jul 2012 20:50:19 +0000 Subject: worldwind_0.5.0-10_amd64.changes ACCEPTED into unstable Message-ID: Accepted: libworldwind-java_0.5.0-10_all.deb to non-free/w/worldwind/libworldwind-java_0.5.0-10_all.deb worldwind-doc_0.5.0-10_all.deb to non-free/w/worldwind/worldwind-doc_0.5.0-10_all.deb worldwind_0.5.0-10.diff.gz to non-free/w/worldwind/worldwind_0.5.0-10.diff.gz worldwind_0.5.0-10.dsc to non-free/w/worldwind/worldwind_0.5.0-10.dsc worldwind_0.5.0-10_all.deb to non-free/w/worldwind/worldwind_0.5.0-10_all.deb Changes: worldwind (0.5.0-10) unstable; urgency=low . * debian/rules: really fix JAVA_HOME by setting to /usr/lib/jvm/default-java/ Thanks to Sylvestre Ledru for the indication. Override entries for your package: libworldwind-java_0.5.0-10_all.deb - optional non-free/java worldwind-doc_0.5.0-10_all.deb - optional non-free/doc worldwind_0.5.0-10.dsc - source non-free/science worldwind_0.5.0-10_all.deb - optional non-free/science Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Mon Jul 30 21:09:12 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 30 Jul 2012 21:09:12 +0000 Subject: Processing of scilab-celestlab_2.4.2-1-1_amd64.changes Message-ID: scilab-celestlab_2.4.2-1-1_amd64.changes uploaded successfully to localhost along with the files: scilab-celestlab_2.4.2-1-1.dsc scilab-celestlab_2.4.2-1.orig.tar.bz2 scilab-celestlab_2.4.2-1-1.debian.tar.gz scilab-celestlab_2.4.2-1-1_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Mon Jul 30 21:17:19 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Mon, 30 Jul 2012 21:17:19 +0000 Subject: scilab-celestlab_2.4.2-1-1_amd64.changes ACCEPTED into experimental Message-ID: Accepted: scilab-celestlab_2.4.2-1-1.debian.tar.gz to main/s/scilab-celestlab/scilab-celestlab_2.4.2-1-1.debian.tar.gz scilab-celestlab_2.4.2-1-1.dsc to main/s/scilab-celestlab/scilab-celestlab_2.4.2-1-1.dsc scilab-celestlab_2.4.2-1-1_all.deb to main/s/scilab-celestlab/scilab-celestlab_2.4.2-1-1_all.deb scilab-celestlab_2.4.2-1.orig.tar.bz2 to main/s/scilab-celestlab/scilab-celestlab_2.4.2-1.orig.tar.bz2 Changes: scilab-celestlab (2.4.2-1-1) experimental; urgency=low . * New upstream release * Standards-Version updated to version 3.9.3 Override entries for your package: scilab-celestlab_2.4.2-1-1.dsc - source math scilab-celestlab_2.4.2-1-1_all.deb - optional math Announcing to debian-experimental-changes at lists.debian.org Announcing to debian-devel-changes at lists.debian.org Thank you for your contribution to Debian. From uknl.er at yahoo.co.uk Mon Jul 30 21:24:38 2012 From: uknl.er at yahoo.co.uk (Lottery Board) Date: Tue, 31 Jul 2012 03:54:38 +0630 Subject: Attn: Winner Message-ID: <20120730212438.M53685@yahoo.co.uk> You have won ?2,696,385 in our Online World Promotions. For the Claim of your award forward Your Full Names: Contact Address: Telephone Number Age: Occupation: to Mr. Marc Kenneth E-mail Address marc_kenneth_77 at yahoo.co.uk From mirandasajid at inbox.com Mon Jul 30 22:36:32 2012 From: mirandasajid at inbox.com (Miss miranda Sajid) Date: Tue, 31 Jul 2012 00:36:32 +0200 (CEST) Subject: Bug#675207: Greetings my dear Message-ID: <13463406.2082531343687792461.JavaMail.defaultUser@defaultHost> Hello, My names is Miranda. How are you doing? Hope fine. From web12_brian at att.net Mon Jul 30 22:49:54 2012 From: web12_brian at att.net (Brian Buschek) Date: Mon, 30 Jul 2012 15:49:54 -0700 (PDT) Subject: My Good Friend Message-ID: <1343688594.77514.YahooMailClassic@web182206.mail.bf1.yahoo.com> Please read attached private message from Brian Buschek -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Hello My Good Friend.docx Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document Size: 11033 bytes Desc: not available URL: From amy at fwvolvo.com.tw Mon Jul 30 23:42:29 2012 From: amy at fwvolvo.com.tw (FACCO GROUP LTD) Date: Tue, 31 Jul 2012 06:42:29 +0700 Subject: Inquiry......., Message-ID: <20120731004550.3AF291287B5@mail.fwvolvo.com.tw> Dear Seller, We are interested in your products,Would you please provide us with the following information: 1. Prices FOB 2. Payment Terms 3. Handling Time 4. Minimum Order Quantity (MOQ) 5. Specified delivery date from the Date of Order We would appreciate a quick reply. Best Wishes, FACCO GROUP LTD From Ludmila.Stanova at fses.uniba.sk Tue Jul 31 05:39:47 2012 From: Ludmila.Stanova at fses.uniba.sk (=?iso-8859-1?Q?Stanov=E1=2C_Ludmila?=) Date: Tue, 31 Jul 2012 07:39:47 +0200 Subject: =?iso-8859-1?Q?Upgrade_e-mailov=E9ho_=FActu_Limit?= Message-ID: <85E0009797EAFB44A41263E6BA79ECDA01291FF4@postar.rec.uniba.sk> Upgrade e-mailov?ho ?ctu Limit Vasa postov? schr?nka prekrocila jeden alebo viac velkostnej limity stanoven? spr?vcom. Nemozno odosielat alebo prij?mat e-maily az do velkosti postovej schr?nky sa znizuje. Ak chcete z?skat viac priestoru. Pros?m, kliknite na odkaz nizsie vyplnit a odoslat d?ta s lahkostou. ================> http://www.decofusta.org/form/use/sk/form1.html Vdaka a ospravedlnujem sa. spr?vca syst?mu -------------- next part -------------- An HTML attachment was scrubbed... URL: From themiwi at users.sourceforge.net Tue Jul 31 07:25:39 2012 From: themiwi at users.sourceforge.net (Michael Wild) Date: Tue, 31 Jul 2012 07:25:39 +0000 Subject: Bug#683369: freefoam-dev-doc: The API documentation is unusable Message-ID: <20120731072539.25963.65072.reportbug@localhost6.localdomain6> Package: freefoam-dev-doc Version: 0.1.0-1 Severity: minor Dear Maintainer, The API documnetation contained in freefoam-dev-doc is almost unusable for two reasons: 1) The CSS and image resources are not installed, the rendered pages are completely disfigured. 2) More importantly, the header snippet doc/Doxygen/FoamHeader.html in the upstream sources is completely outdated and does not work well together with the Doxygen present in Debian unstable (1.8.1.2). As a consequence the dynamic HTML sections do not work -- i.e. one cannot see the graphs, inherited members etc. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-27-generic (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash freefoam-dev-doc depends on no packages. Versions of packages freefoam-dev-doc recommends: ii python 2.7.3-2 freefoam-dev-doc suggests no packages. -- no debconf information From julien.cristau at logilab.fr Tue Jul 31 09:06:44 2012 From: julien.cristau at logilab.fr (Julien Cristau) Date: Tue, 31 Jul 2012 11:06:44 +0200 Subject: Bug#683374: oce: trouble loading plugin Message-ID: <20120731090644.GA626@crater2.logilab.fr> Package: oce Version: 0.10-1 Severity: normal Plugin::Load in src/Plugin/Plugin.cxx basically does dlopen("lib" + $name_of_the_plugin + ".so"). When $name_of_the_plugin is FWOSPlugin that fails unless liboce-ocaf-lite-dev is installed, which seems like it shouldn't be necessary. I'm not sure if this is a bug in the application, if Plugin::Load should be able to find the versioned file, or if libFWOSPlugin.so should be shipped in the runtime lib package (in a suitably versioned directory). Any hint welcome. Cheers, Julien -- System Information: Debian Release: 6.0.5 APT prefers stable APT policy: (990, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=C, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- Julien Cristau Logilab http://www.logilab.fr/ Informatique scientifique & gestion de connaissances From bouzim at gmail.com Tue Jul 31 11:55:20 2012 From: bouzim at gmail.com (D. Barbier) Date: Tue, 31 Jul 2012 13:55:20 +0200 Subject: Bug#683374: oce: trouble loading plugin In-Reply-To: <20120731090644.GA626@crater2.logilab.fr> References: <20120731090644.GA626@crater2.logilab.fr> Message-ID: On 2012/7/31 Julien Cristau wrote: > Package: oce > Version: 0.10-1 > Severity: normal > > Plugin::Load in src/Plugin/Plugin.cxx basically does > dlopen("lib" + $name_of_the_plugin + ".so"). When $name_of_the_plugin > is FWOSPlugin that fails unless liboce-ocaf-lite-dev is installed, which > seems like it shouldn't be necessary. I'm not sure if this is a bug in > the application, if Plugin::Load should be able to find the versioned > file, or if libFWOSPlugin.so should be shipped in the runtime lib Hello Julien, We may move libFWOSPlugin.so into /usr/lib/oce-0.10. DRAWEXE will work just fine (because of its rpath settings), but Plugin::Load would have to be taught to look into this directory if we want to not break other applications. Another idea is to edit /usr/share/oce-0.10/src/StdResource/Plugin and replace a148e300-5740-11d1-a904-080036aaa103.Location: FWOSPlugin by a148e300-5740-11d1-a904-080036aaa103.Location: FWOSPlugin-3 A symlink libFWOSPlugin-3.so --> libFWOSPlugin.so.3 will then do the trick. I prefer this solution, no change is required in source files. Denis From ftpmaster at ftp-master.debian.org Tue Jul 31 18:17:16 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 31 Jul 2012 18:17:16 +0000 Subject: herwig++_2.6.0-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: herwig++-data_2.6.0-1_all.deb to main/h/herwig++/herwig++-data_2.6.0-1_all.deb herwig++-dev_2.6.0-1_amd64.deb to main/h/herwig++/herwig++-dev_2.6.0-1_amd64.deb herwig++_2.6.0-1.debian.tar.gz to main/h/herwig++/herwig++_2.6.0-1.debian.tar.gz herwig++_2.6.0-1.dsc to main/h/herwig++/herwig++_2.6.0-1.dsc herwig++_2.6.0-1_amd64.deb to main/h/herwig++/herwig++_2.6.0-1_amd64.deb herwig++_2.6.0.orig.tar.gz to main/h/herwig++/herwig++_2.6.0.orig.tar.gz Changes: herwig++ (2.6.0-1) unstable; urgency=low . * Initial release (Closes: #636988) Override entries for your package: herwig++-data_2.6.0-1_all.deb - optional science herwig++-dev_2.6.0-1_amd64.deb - optional science herwig++_2.6.0-1.dsc - optional science herwig++_2.6.0-1_amd64.deb - optional science Announcing to debian-devel-changes at lists.debian.org Closing bugs: 636988 Thank you for your contribution to Debian. From ftpmaster at debian.org Tue Jul 31 18:21:33 2012 From: ftpmaster at debian.org (Luca Falavigna) Date: Tue, 31 Jul 2012 18:21:33 +0000 Subject: trilinos_10.8.5.dfsg-1_amd64.changes REJECTED Message-ID: Hi, one of our tireless trainees left some questions about your package: * Python packaging is generally correct, but the package doesn't have a versioned depends on python-numpy nor does it use dh_numpy. This is a recipe for tears. Using dh_numpy will help proper versioning of the numpy depends. * Minor point, the X-Python-Version field in the binary control stanza for python-pytrilinos is a no-op that should be removed. * Empty debian/libtrilinos-doc.docs seems like it should be removed. * debian/README.source doesn't need to mention quilt since it's source format 3. * The library package doesn't match soname. This was also in the sqeeze version of the package, but it's still wrong. Even if upstream bumps sonumber every release, it still makes sense to have the versions match for proper transition. * The cmake snippets in libtrilinos-dev are under a ~BSD like license which is not mentioned in debian/copyright. * This is also true for packages/epetraext/src/, although the wording is slightly different. * Copyright years for Sandia's LGPL 2.1 code in the package are incomplete. packages/piro/src/Piro_ValidPiroParameters.cpp is copyright 2010. Others, throughout the package are 2001 and 2009. * packages/tpetra/doc/MatrixMatrixReport/snllineblk.eps is Copyright: ((C) 1987-1996 Adobe Systems Incorporated All Rights Reserved) - No sign of a license, so non-free and must be removed. Same with packages/tpetra/doc/MatrixMatrixReport/DOEbwlogo.eps. These copyrights appear to be embedded based on the epa files being created with Adobe Illustrator. So these are not the preferred form of modification, regardles of the license. * packages/amesos2/doc/amesos2_logo.eps, packages/PyTrilinos/doc/UsersGuide/snllineblk.eps, and packages/PyTrilinos/doc/UsersGuide/DOEbwlogo.eps appear to suffer similar problems. * packages/PyTrilinos/doc/UsersGuide/PyTrilinos.eps: % This copyright applies to everything between here and the %%EndProlog: % Copyright (C) 2003 artofcode LLC, Benicia, CA. All rights reserved. * packages/rythmos/doc/design_document/snllineblk.eps:%%Copyright: ((C) 1987-1996 Adobe Systems Incorporated All Rights Reserved) * packages/rythmos/doc/design_document/DOEbwlogo.eps:%%Copyright: ((C) 1987-1996 Adobe Systems Incorporated All Rights Reserved) * There are quite a number of other eps files with apparently problematic coppyright claims. * packages/rythmos/adapters/gaasp/tpl_src is Copyright (c) 2007-8 Colorado State University. (but GPL licensed) and not mentioned in debian/copyright. Cheers, Luca === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns. From ftpmaster at debian.org Tue Jul 31 19:19:18 2012 From: ftpmaster at debian.org (Luca Falavigna) Date: Tue, 31 Jul 2012 19:19:18 +0000 Subject: Comments regarding eclib_2012-07-03-1_amd64.changes Message-ID: Hi, please note you stated License: LGPL-2+ in copyright file, while the license header contains the GPL-2+ (which is correct). Please fix it in future uploads, together with the link to common-licenses. Cheers, Luca From ftpmaster at ftp-master.debian.org Tue Jul 31 19:32:09 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 31 Jul 2012 19:32:09 +0000 Subject: eclib_2012-07-03-1_amd64.changes ACCEPTED into unstable Message-ID: Accepted: eclib-tools_2012-07-03-1_amd64.deb to main/e/eclib/eclib-tools_2012-07-03-1_amd64.deb eclib_2012-07-03-1.debian.tar.gz to main/e/eclib/eclib_2012-07-03-1.debian.tar.gz eclib_2012-07-03-1.dsc to main/e/eclib/eclib_2012-07-03-1.dsc eclib_2012-07-03.orig.tar.gz to main/e/eclib/eclib_2012-07-03.orig.tar.gz libec-dev_2012-07-03-1_amd64.deb to main/e/eclib/libec-dev_2012-07-03-1_amd64.deb libec0_2012-07-03-1_amd64.deb to main/e/eclib/libec0_2012-07-03-1_amd64.deb Changes: eclib (2012-07-03-1) unstable; urgency=low . * Upgraded to latest upstream. . eclib (2012-06-01-1) unstable; urgency=low . * Initial release (Closes: #673143). Override entries for your package: eclib-tools_2012-07-03-1_amd64.deb - optional math eclib_2012-07-03-1.dsc - source math libec-dev_2012-07-03-1_amd64.deb - optional libdevel libec0_2012-07-03-1_amd64.deb - optional math Announcing to debian-devel-changes at lists.debian.org Closing bugs: 673143 Thank you for your contribution to Debian. From ftpmaster at ftp-master.debian.org Tue Jul 31 21:16:40 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 31 Jul 2012 21:16:40 +0000 Subject: Processing of spyder_2.1.10-2_i386.changes Message-ID: spyder_2.1.10-2_i386.changes uploaded successfully to localhost along with the files: spyder_2.1.10-2.dsc spyder_2.1.10-2.debian.tar.gz spyder_2.1.10-2_all.deb python-spyderlib_2.1.10-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org) From ftpmaster at ftp-master.debian.org Tue Jul 31 21:19:03 2012 From: ftpmaster at ftp-master.debian.org (Debian FTP Masters) Date: Tue, 31 Jul 2012 21:19:03 +0000 Subject: spyder_2.1.10-2_i386.changes ACCEPTED into unstable Message-ID: Accepted: python-spyderlib_2.1.10-2_all.deb to main/s/spyder/python-spyderlib_2.1.10-2_all.deb spyder_2.1.10-2.debian.tar.gz to main/s/spyder/spyder_2.1.10-2.debian.tar.gz spyder_2.1.10-2.dsc to main/s/spyder/spyder_2.1.10-2.dsc spyder_2.1.10-2_all.deb to main/s/spyder/spyder_2.1.10-2_all.deb Changes: spyder (2.1.10-2) unstable; urgency=low . * debian/pacthes - 0003-from-upstream-fix-1098.patch (new) (Closes: #678339) Override entries for your package: python-spyderlib_2.1.10-2_all.deb - extra python spyder_2.1.10-2.dsc - source devel spyder_2.1.10-2_all.deb - extra devel Announcing to debian-devel-changes at lists.debian.org Closing bugs: 678339 Thank you for your contribution to Debian. From owner at bugs.debian.org Tue Jul 31 21:21:08 2012 From: owner at bugs.debian.org (Debian Bug Tracking System) Date: Tue, 31 Jul 2012 21:21:08 +0000 Subject: Bug#678339: marked as done ([spyder] Error message in internal console when saving file) References: <20120621002352.1e3223dd@Fuddel> Message-ID: Your message dated Tue, 31 Jul 2012 21:19:03 +0000 with message-id and subject line Bug#678339: fixed in spyder 2.1.10-2 has caused the Debian Bug report #678339, regarding [spyder] Error message in internal console when saving file to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner at bugs.debian.org immediately.) -- 678339: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678339 Debian Bug Tracking System Contact owner at bugs.debian.org with problems -------------- next part -------------- An embedded message was scrubbed... From: Martin Manns Subject: [spyder] Error message in internal console when saving file Date: Thu, 21 Jun 2012 00:23:52 +0200 Size: 5424 URL: -------------- next part -------------- An embedded message was scrubbed... From: =?utf-8?q?Picca_Fr=C3=A9d=C3=A9ric-Emmanuel?= Subject: Bug#678339: fixed in spyder 2.1.10-2 Date: Tue, 31 Jul 2012 21:19:03 +0000 Size: 4407 URL: