[debian-yeeloong-project] Loongson console display text

[Tzafrir Cohen]

Hi,

Thanks for the quick reply,

On Sat, Aug 28, 2010 at 11:06:58PM +0800, liushiwei wrote:
>  yeeloong run debia6, just above this 3 patches.
> 
> sm712 patch:
> http://www.bjlx.org.cn/loongson2f/squeeze/xserver-xorg-video-siliconmotion/98_sm712_CRT_enable.diff
> http://www.bjlx.org.cn/loongson2f/squeeze/xserver-xorg-video-siliconmotion/99_xf86-video-siliconmotion-1.7.3-fix-loongson.diff

I get the following error, either when I try to build your package or
when I try to apply your second patch:

libtool: compile:  gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../src -I..
-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes
-Wmissing-declarations -Wnested-externs -fno-strict-aliasing
-Wbad-function-cast -Wformat=2 -Wold-style-definition
-Wdeclaration-after-statement -fvisibility=hidden -I/usr/include/xorg
-I/usr/include/pixman-1 -Wall -g -O2 -MT smi_video.lo -MD -MP -MF
.deps/smi_video.Tpo -c ../../src/smi_video.c  -fPIC -DPIC -o
.libs/smi_video.o
/tmp/ccBqSRfw.s: Assembler messages:
/tmp/ccBqSRfw.s:4469: Error: illegal operands `xor $f0,$f0,$f0'
/tmp/ccBqSRfw.s:4470: Error: opcode not supported on this processor:
mips1 (mips1) `ldc1 $f4,($6)'
/tmp/ccBqSRfw.s:4471: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f2,$f4,$f0'
/tmp/ccBqSRfw.s:4472: Error: opcode not supported on this processor:
mips1 (mips1) `punpckhbh $f4,$f4,$f0'
/tmp/ccBqSRfw.s:4473: Error: opcode not supported on this processor:
mips1 (mips1) `ldc1 $f16,8($6)'
/tmp/ccBqSRfw.s:4474: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f14,$f16,$f0'
/tmp/ccBqSRfw.s:4475: Error: opcode not supported on this processor:
mips1 (mips1) `punpckhbh $f16,$f16,$f0'
/tmp/ccBqSRfw.s:4478: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f8,$f8,$f12'
/tmp/ccBqSRfw.s:4479: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f6,$f0,$f8'
/tmp/ccBqSRfw.s:4480: Error: opcode not supported on this processor:
mips1 (mips1) `punpckhbh $f8,$f0,$f8'
/tmp/ccBqSRfw.s:4483: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f18,$f18,$f12'
/tmp/ccBqSRfw.s:4484: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f10,$f0,$f18'
/tmp/ccBqSRfw.s:4485: Error: opcode not supported on this processor:
mips1 (mips1) `punpckhbh $f12,$f0,$f18'
/tmp/ccBqSRfw.s:4486: Error: illegal operands `or $f2,$f2,$f6'
/tmp/ccBqSRfw.s:4487: Error: illegal operands `or $f4,$f4,$f8'
/tmp/ccBqSRfw.s:4488: Error: illegal operands `or $f14,$f14,$f10'
/tmp/ccBqSRfw.s:4489: Error: illegal operands `or $f16,$f16,$f12'
/tmp/ccBqSRfw.s:4490: Error: opcode not supported on this processor:
mips1 (mips1) `sdc1 $f2,($23)'
/tmp/ccBqSRfw.s:4491: Error: opcode not supported on this processor:
mips1 (mips1) `sdc1 $f4,8($23)'
/tmp/ccBqSRfw.s:4495: Error: opcode not supported on this processor:
mips1 (mips1) `sdc1 $f14,0x10($23)'
/tmp/ccBqSRfw.s:4496: Error: opcode not supported on this processor:
mips1 (mips1) `sdc1 $f16,0x18($23)'
/tmp/ccBqSRfw.s:4511: Error: illegal operands `xor $f0,$f0,$f0'
/tmp/ccBqSRfw.s:4512: Error: opcode not supported on this processor:
mips1 (mips1) `ldc1 $f4,($6)'
/tmp/ccBqSRfw.s:4513: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f2,$f4,$f0'
/tmp/ccBqSRfw.s:4514: Error: opcode not supported on this processor:
mips1 (mips1) `punpckhbh $f4,$f4,$f0'
/tmp/ccBqSRfw.s:4517: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f8,$f8,$f12'
/tmp/ccBqSRfw.s:4518: Error: opcode not supported on this processor:
mips1 (mips1) `punpcklbh $f6,$f0,$f8'
/tmp/ccBqSRfw.s:4519: Error: opcode not supported on this processor:
mips1 (mips1) `punpckhbh $f8,$f0,$f8'
/tmp/ccBqSRfw.s:4520: Error: illegal operands `or $f2,$f2,$f6'
/tmp/ccBqSRfw.s:4521: Error: illegal operands `or $f4,$f4,$f8'
/tmp/ccBqSRfw.s:4522: Error: opcode not supported on this processor:
mips1 (mips1) `sdc1 $f2,($23)'
/tmp/ccBqSRfw.s:4523: Error: opcode not supported on this processor:
mips1 (mips1) `sdc1 $f4,8($23)'
make[3]: *** [smi_video.lo] Error 1
make[3]: Leaving directory
`/home/tzafrir/Packs/siliconmotion/sm-loongson-1.7.3/build/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory
`/home/tzafrir/Packs/siliconmotion/sm-loongson-1.7.3/build'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/tzafrir/Packs/siliconmotion/sm-loongson-1.7.3/build'
make: *** [build-stamp] Error 2

> 
> xorg-server-1.7.7 patch:
> http://www.bjlx.org.cn/loongson2f/squeeze/xorg-server/xorg-server-1.7.7_999_loongson-mips-sarea.diff
> 
> 
> 
> 
> /etc/X11/xorg.conf:
> http://www.bjlx.org.cn/loongson2f/squeeze/xorg-server/xorg.conf.yeeloong

Is there really a need for such a xorg.conf file?

-- 
Tzafrir Cohen         | tzafrir at jabber.org | VIM is
http://tzafrir.org.il |                    | a Mutt's
tzafrir at cohens.org.il |                    |  best
tzafrir at debian.org    |                    | friend