[Manpages-de-devel] Accepted sysvinit 2.88dsf-13.3 (source all amd64)

Roger Leigh rleigh at debian.org
Sat Apr 16 16:08:33 UTC 2011 

-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160

Format: 1.8
Date: Sat, 16 Apr 2011 01:17:29 +0100
Source: sysvinit
Binary: sysvinit sysvinit-utils sysv-rc initscripts
Architecture: source amd64 all
Version: 2.88dsf-13.3
Distribution: experimental
Urgency: low
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel at lists.alioth.debian.org>
Changed-By: Roger Leigh <rleigh at debian.org>
Description: 
 initscripts - scripts for initializing and shutting down the system
 sysv-rc    - System-V-like runlevel change mechanism
 sysvinit   - System-V-like init utilities
 sysvinit-utils - System-V-like utilities
Closes: 186892 353943 378776 406685 423405 481546 483643 503805 530582 564635 585543 599241 599734 607136 612594 616571 620191 620735
Changes: 
 sysvinit (2.88dsf-13.3) experimental; urgency=low
 .
   [ Roger Leigh ]
   * Non-maintainer upload.
   * Support for new top-level directory /run to replace /var/run,
     /var/lock, /dev/shm and /lib/init/rw as a place to store transient
     writable data which should not be preserved across a system
     reboot (Closes: #186892, #616571, #620191).  /run fixes existing
     issues with RAMRUN and RAMLOCK options using tmpfs on /var/run and
     /var/lock (Closes: #423405, #481546, #564635, #607136, #620735).
     Additionally, /run/shm replaces /dev/shm and may share the same
     tmpfs as /run if RAMSHM is set to "no" in /etc/default/rcS.  /tmp
     may also be configured to be a tmpfs if RAMTMP is set to "yes" in
     /etc/default/rcS.  /tmp may also be configured to use /run directly if
     it is symlinked to /run/tmp, for example.
     Summary:
       /var/run → /run
       /var/lock → /run/lock
       /dev/shm → /run/shm
       /lib/init/rw → /run (not transitioned automatically)
       /dev/.* → /run (not transitioned automatically)
     These changes do not take effect until the system is rebooted as
     is currently done for /lib/init/rw setup.  Prior to a reboot, the
     paths are made available via bind/nullfs/firmlink mounts, depending on
     the platform.  Following a reboot, the old paths will be converted to
     symlinks, or bind/nullfs/firmlink mounts where symlinking is not
     possible, to allow access via either the old or new paths, to permit
     programs using the old paths to transition to use the new paths for
     wheezy.
     - debian/initscripts.postinst:
       Take chroot detection logic from udev postinst (existing logic was
       broken).  Add detection logic for vserver environments and Hurd.
       Trigger reboot to complete transition.
       If the system has not yet transitioned to a tmpfs-based /run, set up
       bind mounts as follows:
         /var/run → /run
         /var/lock → /run/lock
         /dev/shm → /run/shm
       On reboot, the system will complete the migration to a tmpfs-based
       /run; this creates the directory heierachy from the old paths to
       enable the use of the new /run paths prior to a restart.  This means
       packages may transition to using /run with a versioned dependency
       upon initscripts.
       Remove special handling for RAMRUN and RAMLOCK, which is now taken
       care of by /run.
       If in a chroot environment, just create symlinks from the new names
       to the existing locations, since otherwise the changes would be
       lost, and since rcS scripts aren't run the transition won't
       complete.
     - debian/src/initscripts/Makefile:
       Provide top-level /run.
     - debian/src/initscripts/doc/README.Debian:
       Document new use of RUN_SIZE and LOCK_SIZE.
       Document use of /run rather than /lib/init/rw.
       Document use of SHM_SIZE and TMP_SIZE.
     - debian/src/initscripts/etc/init.d/checkroot.sh:
       Use /run in place of /lib/init/rw.
     - debian/src/initscripts/etc/default/tmpfs:
       Document TMPFS_SIZE, RUN_SIZE and LOCK_SIZE (Closes: #483643).
       Document TMP_SIZE and SHM_SIZE.
     - debian/src/initscripts/etc/init.d/mountkernfs.sh:
       Create /run, /run/sendsigs.omit.d and /run/lock.
       Mount /run/lock as a separate tmpfs if RAMLOCK=yes.
       /run/lock has 01777 permissions to match /var/lock.
       Mount /tmp as a separate tmpfs if RAMTMP=yes or / is being mounted
       read-only (Closes: #503805, #585543).
       Drop mounting of /var/run and /var/lock.
     - debian/src/initscripts/etc/init.d/mountdevsubfs.sh:
       Create /run/shm.  Mount /run/shm as a separate tmpfs if RAMSHM=yes.
     - debian/src/initscripts/etc/init.d/mtab.sh:
       domtab mirrors behaviour of domount in mount-functions exactly, to
       prevent duplicate mounts (required for bind mount support).
       Bind mount /run/init and drop mounting of /var/run.  Mount /run/lock
       in place of /var/lock.
       Mount /tmp if RAMTMP=yes.
       Mount /run/shm if RAMSHM=yes.
     - debian/src/initscripts/etc/init.d/sendsigs:
       Use new paths:
         files: /run/sendsigs.omit /lib/init/rw/sendsigs.omit
         dirs: /run/sendsigs.omit.d/ /lib/init/rw/sendsigs.omit.d/
     - debian/src/initscripts/etc/init.d/umountfs:
       Ignore /run.  Continue to ignore /lib/init/rw in order to handle
       clean shutdown.  No longer ignore /var/run and /var/lock.
     - debian/src/initscripts/etc/init.d/umountnfs.sh:
       Check for presence of .ramfs than configuration variable when
       skipping /var/run and /var/lock.
       Ignore /run.  Continue to ignore /lib/init/rw in order to handle
       clean shutdown.  No longer ignore /var/run and /var/lock.
     - debian/src/initscripts/lib/init/bootclean.sh
       Don't clean /var/run and /var/lock (Closes: #378776).  Because
       these directories are now a tmpfs, cleaning no longer makes sense.
     - debian/src/initscripts/lib/init/tmpfs.sh:
       Read /etc/default/tmpfs and provide defaults if unset.
     - debian/src/initscripts/lib/init/mount-functions.sh:
       Support bind mounts in domount() (Closes: #353943).
       Drop support for mounting /var/run and /var/lock as separate
       tmpfs filesystems.  Symlink /var/run to /run and /var/lock to
       /run/lock if possible.  If /var/run and /var/lock are directories,
       attempt to remove and symlink if successful, or else bind mount.
     - debian/src/initscripts/lib/init/vars.sh:
       Read /etc/default/rcS and provide defaults if unset.
     - debian/src/initscripts/man/rcS.5:
       Drop documentation of RAMRUN.
       Update documentation for RAMLOCK (Closes: #406685).
       Document RAMTMP and RAMSHM.
     - debian/src/initscripts/share/default.rcS:
       Remove RAMRUN.
       Add RAMSHM and RAMTMP.
       RAMLOCK, RAMSHM and RAMTMP default to enabled for new installs.
 .
   [ Michael Biebl ]
   * Remove dead usplash support code (Closes: #599241, #599734, #612594).
 .
   [ Martin F. Krafft ]
   * Add comments to /etc/default/rcS (Closes: #530582).
 .
   [ Samuel Thibault ]
   Hurd portability for initscripts postinst and init scripts.
   Hurd does not currently support tmpfs mounts, but will do in the
   future.  Use firmlinks in place of bind mounts.
Checksums-Sha1: 
 be9d988363ea206734abf37e28aa05c0e6562b4e 1532 sysvinit_2.88dsf-13.3.dsc
 de3efda313a5c2f31d54eadeeff76b161da65156 172561 sysvinit_2.88dsf-13.3.diff.gz
 b78268833a44e50f9cd3e2f9c973e586e1950092 123172 sysvinit_2.88dsf-13.3_amd64.deb
 124dd7d5976ab932b12836aa034285adf38ebadc 123756 sysvinit-utils_2.88dsf-13.3_amd64.deb
 549bda85e582e268f0c845f510af1f15c0a78e23 75664 initscripts_2.88dsf-13.3_amd64.deb
 b2825862ee97b31ff274955be71a231546dd7c83 76464 sysv-rc_2.88dsf-13.3_all.deb
Checksums-Sha256: 
 07d58ffae680f2875127b9192a7e2d9e4ac5d43df44592d5c353992e869352a6 1532 sysvinit_2.88dsf-13.3.dsc
 661a477552f9be1a0f1f112b392a0f18f6007ca5490fc94079c771f90671cfcf 172561 sysvinit_2.88dsf-13.3.diff.gz
 4c1472aef05058062225daddf11d4390824a73b7bdea886508b26b1f6722495f 123172 sysvinit_2.88dsf-13.3_amd64.deb
 7990833fcea2c8b52bf91f7e2dfce748ec285270926aa2f86ffc3dcf8e9881fd 123756 sysvinit-utils_2.88dsf-13.3_amd64.deb
 5f9af575d548648a96c07412df3c4a83fde14575b3cc714b16203211736795b2 75664 initscripts_2.88dsf-13.3_amd64.deb
 dd1393d8206bb5b320d42f92b100636108396edb59fb993a69823aea04cae57a 76464 sysv-rc_2.88dsf-13.3_all.deb
Files: 
 ce5a50face05beafa6cab9642a0bb95a 1532 admin required sysvinit_2.88dsf-13.3.dsc
 6dbe29e91350698e63857ae24de5ffbf 172561 admin required sysvinit_2.88dsf-13.3.diff.gz
 7518abcfd4f81b48129b56d32e0ae9a8 123172 admin required sysvinit_2.88dsf-13.3_amd64.deb
 9a672f235a3a1cae9b0435ee3397c41c 123756 admin required sysvinit-utils_2.88dsf-13.3_amd64.deb
 281d99c48bda7dd1abf32b74c5f91ab2 75664 admin required initscripts_2.88dsf-13.3_amd64.deb
 c802c38a538c6e39e05b6d079833e4f9 76464 admin required sysv-rc_2.88dsf-13.3_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iEYEAREDAAYFAk2puNAACgkQVcFcaSW/uEgMKwCg7OelUXpt8gjS5XCQJ6fdnL8N
cvMAniD5GrfZsHPB8tn1OIkv3OQNnDoB
=KEGe
-----END PGP SIGNATURE-----


Accepted:
initscripts_2.88dsf-13.3_amd64.deb
  to main/s/sysvinit/initscripts_2.88dsf-13.3_amd64.deb
sysv-rc_2.88dsf-13.3_all.deb
  to main/s/sysvinit/sysv-rc_2.88dsf-13.3_all.deb
sysvinit-utils_2.88dsf-13.3_amd64.deb
  to main/s/sysvinit/sysvinit-utils_2.88dsf-13.3_amd64.deb
sysvinit_2.88dsf-13.3.diff.gz
  to main/s/sysvinit/sysvinit_2.88dsf-13.3.diff.gz
sysvinit_2.88dsf-13.3.dsc
  to main/s/sysvinit/sysvinit_2.88dsf-13.3.dsc
sysvinit_2.88dsf-13.3_amd64.deb
  to main/s/sysvinit/sysvinit_2.88dsf-13.3_amd64.deb

More information about the Manpages-de-devel mailing list