[Nut-upsdev] Re: [Nut-upsuser] Network UPS Tools version 2.0.5 released

[Henning Brauer]

* Kjell Claesson <kjell.claesson at epost.tidanet.se> [2007-01-17 22:01]:
> (Sorry if you get this email again. My isp have some trouble.)
> 
> Hi.
> 
> Yes Arnaud i check this out.
> 
> ons 2007-01-17 klockan 03:29 +0100 skrev Henning Brauer:
> > * Arnaud Quette <aquette.dev at gmail.com> [2007-01-15 16:44]:
> > > Network UPS Tools version 2.0.5 has been released.
> > 
> > bcmxcp stopped working with my compaqs completely. 2.0.3 works.
> > 
> 
> Have you tested 2.0.4 ? It should work as it use the same driver as
> 2.0.3.

no, haven't used 2.0.4

> Recomend you to set the baud_rate in ups.conf.
> Then you don't see all the baudhunting errors.

used tohave that, removed for debugging this issue

> The problem come from reading the 'ups topology data'.
> 
> I suppose you are building from source so can you comment out
> this in the bcmxcp.c file.

i'm actually using the openbsd port (well, 2.0.5 is not yet comitted 
there because of this), but i can arrange for that

-- 
Henning Brauer, hb at bsws.de, henning at openbsd.org
BS Web Services, http://bsws.de
Full-Service ISP - Secure Hosting, Mail and DNS Services
Dedicated Servers, Rootservers, Application Hosting - Hamburg & Amsterdam