[Nut-upsdev] megatec_usb: Ippon BackComfoPro (06da:0003 Phoenixtec Power)

[Roman Mamedov]

On Fri, 19 Dec 2008 23:42:03 +0100
Arjen de Korte <nut+devel at de-korte.org> wrote:

> This is a known problem with some UPS'es that lock up if you send
> them the 'F\r' and 'I\r' commands. Put the 'norating' and 'novendor'
> flags in 'ups.conf' (seen 'man 8 blazer') and you'll probably be fine
> (after replugging the UPS).

Unfortunately that does not help.

ups.conf: 

[ippon-blazer]
        driver = blazer_usb
        port = auto
        vendorid = 06da
        productid = 0003
        norating
        novendor

log:

$ sudo ./blazer_usb -DDD -a ippon-blazer
Network UPS Tools - Megatec/Q1
protocol USB driver 0.02 (2.3.0-1660M) debug level is '3'
Checking device (1D6B/0002) (002/001)
- VendorID: 1d6b
- ProductID: 0002
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (06DA/0003) (001/006)
- VendorID: 06da
- ProductID: 0003
- Manufacturer: CTN
- Product: USB UPS
- Serial Number: unknown
- Bus: 001
Trying to match device
Device matches
Trying megatec protocol...
send: Q1
read: (206.0 206.4 206.4 023 50.1 13.8 25.0 00001001
Status read in 1 tries
Supported UPS detected with megatec protocol
send: Connection timed out
blazer_command: Connection timed out
blazer_status: short reply
Communications with UPS lost: status read failed!
dstate_init: sock /var/run/nut//blazer_usb-ippon-blazer open on fd 5
send: Timer expired
blazer_command: Timer expired
blazer_status: short reply
Communications with UPS lost: status read failed!
send: Timer expired
blazer_command: Timer expired
blazer_status: short reply
Communications with UPS lost: status read failed!
send: Timer expired
blazer_command: Timer expired
blazer_status: short reply
send: Timer expired
blazer_command: Timer expired
blazer_status: short reply
send: Timer expired
blazer_command: Timer expired
blazer_status: short reply



-- 
With respect,
Roman