[Nut-upsdev] Is in in process driver for AIPTEK UPS PowerWalker VI 2000 LCD USB

Dimitar Angelov mitko at edabg.com
Mon Oct 18 08:22:11 UTC 2010


Thank you for the response!

Here is the output from lsusb -vvv:
Our UPS is appeared as 'Bus 002 Device 003: ID 0665:5161 Cypress 
Semiconductor USB to Serial'.
----------------------------------------------------------------------
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            9 Hub
   bDeviceSubClass         0 Unused
   bDeviceProtocol         0 Full speed (or root) hub
   bMaxPacketSize0        64
   idVendor           0x1d6b Linux Foundation
   idProduct          0x0001 1.1 root hub
   bcdDevice            2.06
   iManufacturer           3 Linux 2.6.32-bpo.5-amd64 uhci_hcd
   iProduct                2 UHCI Host Controller
   iSerial                 1 0000:00:1d.2
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           25
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xe0
       Self Powered
       Remote Wakeup
     MaxPower                0mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         9 Hub
       bInterfaceSubClass      0 Unused
       bInterfaceProtocol      0 Full speed (or root) hub
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0002  1x 2 bytes
         bInterval             255
Hub Descriptor:
   bLength               9
   bDescriptorType      41
   nNbrPorts             2
   wHubCharacteristic 0x000a
     No power switching (usb 1.0)
     Per-port overcurrent protection
   bPwrOn2PwrGood        1 * 2 milli seconds
   bHubContrCurrent      0 milli Ampere
   DeviceRemovable    0x00
   PortPwrCtrlMask    0xff
  Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
Device Status:     0x0003
   Self Powered
   Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            9 Hub
   bDeviceSubClass         0 Unused
   bDeviceProtocol         0 Full speed (or root) hub
   bMaxPacketSize0        64
   idVendor           0x1d6b Linux Foundation
   idProduct          0x0001 1.1 root hub
   bcdDevice            2.06
   iManufacturer           3 Linux 2.6.32-bpo.5-amd64 uhci_hcd
   iProduct                2 UHCI Host Controller
   iSerial                 1 0000:00:1d.3
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           25
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xe0
       Self Powered
       Remote Wakeup
     MaxPower                0mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         9 Hub
       bInterfaceSubClass      0 Unused
       bInterfaceProtocol      0 Full speed (or root) hub
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0002  1x 2 bytes
         bInterval             255
Hub Descriptor:
   bLength               9
   bDescriptorType      41
   nNbrPorts             2
   wHubCharacteristic 0x000a
     No power switching (usb 1.0)
     Per-port overcurrent protection
   bPwrOn2PwrGood        1 * 2 milli seconds
   bHubContrCurrent      0 milli Ampere
   DeviceRemovable    0x00
   PortPwrCtrlMask    0xff
  Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
Device Status:     0x0003
   Self Powered
   Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               2.00
   bDeviceClass            9 Hub
   bDeviceSubClass         0 Unused
   bDeviceProtocol         0 Full speed (or root) hub
   bMaxPacketSize0        64
   idVendor           0x1d6b Linux Foundation
   idProduct          0x0002 2.0 root hub
   bcdDevice            2.06
   iManufacturer           3 Linux 2.6.32-bpo.5-amd64 ehci_hcd
   iProduct                2 EHCI Host Controller
   iSerial                 1 0000:00:1d.7
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           25
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xe0
       Self Powered
       Remote Wakeup
     MaxPower                0mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         9 Hub
       bInterfaceSubClass      0 Unused
       bInterfaceProtocol      0 Full speed (or root) hub
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0004  1x 4 bytes
         bInterval              12
Hub Descriptor:
   bLength              11
   bDescriptorType      41
   nNbrPorts             8
   wHubCharacteristic 0x000a
     No power switching (usb 1.0)
     Per-port overcurrent protection
   bPwrOn2PwrGood       10 * 2 milli seconds
   bHubContrCurrent      0 milli Ampere
   DeviceRemovable    0x00 0x00
   PortPwrCtrlMask    0xff 0xff
  Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Port 3: 0000.0100 power
    Port 4: 0000.0100 power
    Port 5: 0000.0100 power
    Port 6: 0000.0100 power
    Port 7: 0000.0100 power
    Port 8: 0000.0100 power
Device Status:     0x0003
   Self Powered
   Remote Wakeup Enabled

Bus 002 Device 003: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0665 Cypress Semiconductor
   idProduct          0x5161 USB to Serial
   bcdDevice            0.02
   iManufacturer           1 Cypress Semiconductor
   iProduct                2 USB to Serial
   iSerial                 0
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          3
     bmAttributes         0x80
       (Bus Powered)
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      0 No Subclass
       bInterfaceProtocol      0 None
       iInterface              4 Sample HID
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.00
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      27
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval              32
Device Status:     0x0000
   (Bus Powered)

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            9 Hub
   bDeviceSubClass         0 Unused
   bDeviceProtocol         0 Full speed (or root) hub
   bMaxPacketSize0        64
   idVendor           0x1d6b Linux Foundation
   idProduct          0x0001 1.1 root hub
   bcdDevice            2.06
   iManufacturer           3 Linux 2.6.32-bpo.5-amd64 uhci_hcd
   iProduct                2 UHCI Host Controller
   iSerial                 1 0000:00:1d.1
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           25
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xe0
       Self Powered
       Remote Wakeup
     MaxPower                0mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         9 Hub
       bInterfaceSubClass      0 Unused
       bInterfaceProtocol      0 Full speed (or root) hub
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0002  1x 2 bytes
         bInterval             255
Hub Descriptor:
   bLength               9
   bDescriptorType      41
   nNbrPorts             2
   wHubCharacteristic 0x000a
     No power switching (usb 1.0)
     Per-port overcurrent protection
   bPwrOn2PwrGood        1 * 2 milli seconds
   bHubContrCurrent      0 milli Ampere
   DeviceRemovable    0x00
   PortPwrCtrlMask    0xff
  Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0303 lowspeed power enable connect
Device Status:     0x0003
   Self Powered
   Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            9 Hub
   bDeviceSubClass         0 Unused
   bDeviceProtocol         0 Full speed (or root) hub
   bMaxPacketSize0        64
   idVendor           0x1d6b Linux Foundation
   idProduct          0x0001 1.1 root hub
   bcdDevice            2.06
   iManufacturer           3 Linux 2.6.32-bpo.5-amd64 uhci_hcd
   iProduct                2 UHCI Host Controller
   iSerial                 1 0000:00:1d.0
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           25
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xe0
       Self Powered
       Remote Wakeup
     MaxPower                0mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         9 Hub
       bInterfaceSubClass      0 Unused
       bInterfaceProtocol      0 Full speed (or root) hub
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0002  1x 2 bytes
         bInterval             255
Hub Descriptor:
   bLength               9
   bDescriptorType      41
   nNbrPorts             2
   wHubCharacteristic 0x000a
     No power switching (usb 1.0)
     Per-port overcurrent protection
   bPwrOn2PwrGood        1 * 2 milli seconds
   bHubContrCurrent      0 milli Ampere
   DeviceRemovable    0x00
   PortPwrCtrlMask    0xff
  Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
Device Status:     0x0003
   Self Powered
   Remote Wakeup Enabled
----------------------------------------------------------------------

Best Regards,

Dimitar

On 15.10.2010 г. 18:04, Arjen de Korte wrote:
> Citeren Dimitar Angelov <mitko at edabg.com>:
>
>> Are there in progress development of NUT driver that supports
>> AIPTEK PowerWalker VI 2000 LCD - Art-No 310064
>> (http://www.powerwalker.com/line-interactive.html)?
>
> I don't know, as far as I know we have no specific Aiptek and/or
> PowerWalker projects underway. So unless it is already supported by one
> of the existing drivers, the answer is probably 'no'.
>
> Please provide some more information on the interface being used
> (serial, USB). If USB is used, post the output of 'lsusb -vvv' (run as
> root).
>
> Best regards, Arjen




More information about the Nut-upsdev mailing list