[Nut-upsdev] Problem with detecting "Mustek PowerMust 2000VA"

[Vladimir Micovic]

# dmesg | grep ttyUSB
show nothing.
if you need to check something, here is whole dmesg: 
http://pastebin.com/mNdUmGKH (there is kernel ver.)

and here lsub with verobse:
# /sbin/lsusb -vvv -d 0665:5161

        Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
        Device Descriptor:
           bLength                18
           bDescriptorType         1
           bcdUSB               1.10
           bDeviceClass            0 (Defined at Interface level)
           bDeviceSubClass         0
           bDeviceProtocol         0
           bMaxPacketSize0         8
           idVendor           0x0665 Cypress Semiconductor
           idProduct          0x5161 USB to Serial
           bcdDevice            0.02
           iManufacturer           1 Cypress Semiconductor
           iProduct                2 USB to Serial
           iSerial                 0
           bNumConfigurations      1
           Configuration Descriptor:
             bLength                 9
             bDescriptorType         2
             wTotalLength           34
             bNumInterfaces          1
             bConfigurationValue     1
             iConfiguration          3
             bmAttributes         0x80
             MaxPower              100mA
             Interface Descriptor:
               bLength                 9
               bDescriptorType         4
               bInterfaceNumber        0
               bAlternateSetting       0
               bNumEndpoints           1
               bInterfaceClass         3 Human Interface Device
               bInterfaceSubClass      0 No Subclass
               bInterfaceProtocol      0 None
               iInterface              4 Sample HID
                 HID Device Descriptor:
                   bLength                 9
                   bDescriptorType        33
                   bcdHID               1.00
                   bCountryCode            0 Not supported
                   bNumDescriptors         1
                   bDescriptorType        34 Report
                   wDescriptorLength      27
                  Report Descriptors:
                    ** UNAVAILABLE **
               Endpoint Descriptor:
                 bLength                 7
                 bDescriptorType         5
                 bEndpointAddress     0x81  EP 1 IN
                 bmAttributes            3
                   Transfer Type            Interrupt
                   Synch Type               None
                   Usage Type               Data
                 wMaxPacketSize     0x0008  1x 8 bytes
                 bInterval              32



On 02-Jan-12 4:57 PM, Petr Kubánek wrote:
> run:
>
> dmesg
>
> and look for ttyUSB (dmesg | less should be more usefull)
>
> Petr
>
> Vladimir Micovic píše v Po 02. 01. 2012 v 16:51 +0100:
>> Hello,
>>
>> i am subscribe to list :S
>> How can i see which port can be setup? I need just to try to read data
>> from him, after that i will setup nut by myself i guess :)
>>
>> lsusb show this:
>>
>> Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
>>
>>
>> best regards and thank you.
>>
>>
>> p.s: HNY! :)
>>
>> _______________________________________________
>> Nut-upsdev mailing list
>> Nut-upsdev at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20120102/561afcf7/attachment-0001.html>