[Nut-upsdev] [HCL] <Fideltronik INIGO> <Viper 1200> supported by <nutdrv_qx>

[AWa.]

Device  manufacturer: Fideltronik INIGO
Device  name: Viper 1200
Device type: UPS
Bus type: USB
WWW: http://fideltronikinigo.com/viper/viper-1200/
 
" nut-scanner -U" output:
[nutdev1]
        driver = "blazer_usb"
        port = "auto"
        vendorid = "0001"
        productid = "0000"
        product = "MEC0003"
        vendor = "MEC"
        bus = "004" 
---------------------------------------------------

But "blazer_usb" driver  does not work with this device.

 
My working "ups.conf":
  [Viper1200]
        driver = "nutdrv_qx"
        port = "auto"
        vendorid = "0001"
        productid = "0000"
        product = "MEC0003"
        vendor = "MEC"
        bus = "004"
        default.battery.voltage.high = 27.50
        default.battery.voltage.low  = 20.90
        offdelay = 60
        ondelay = 60
        desc = "Fideltronik  Viper 1200 UPS"
        runtimecal = 60,100,900,21
        idleload = 10
        chargetime = 28800
---------------------------------------------------

"lsusb  -s 004:0002 -v": http://bpa.ksu.pl/pub/lsusb.txt  (28kB)

"nutdrv_qx  -a Viper1200  -DDDD" output (init):  http://bpa.ksu.pl/pub/nutdrv_qx_start.txt  (7kB)

Supported command:
 UPS Information Command (I)
   1.817212	send: I
   1.817224	command index: 0x0c
   2.008115	read: #                1200VA     VER 1.00  
 
 UPS Rating Information (F)
   2.239335	send: F
   2.239347	command index: 0x0d
   2.354142	read: #230.0 5.2 24.00 50.0
 
 Status Inquiry (Q1)
   2.008223	send: Q1
   2.008233	command index: 0x03
   2.239141	read: (226.2 226.2 226.2   0 50.0 27.7 25.0 00001001
 
 beeper.toggle (Q)
   - if the beeper emits a beep at the time when command is issued the beep never ends... 
   - the beeper can not be switched off if UPS is on line.
      396.231354	instcmd(beeper.toggle, [NULL])
      396.231400	send: Q
      396.231414	command index: 0x07
      396.250914	read: UPS No Ack
      396.250947	instcmd: FAILED
   
 load.off (S00R0000)
   - load are switched off after 30s,
   - "C" command will not break the shutdown.
   - nutdrv_qx output: http://bpa.ksu.pl/pub/nutdrv_qx_load.off.txt (4kB)

 load.on or shutdown.stop (C)
   - load are switched on after 10s,
   - stop olny "shutdown.return",
   - nutdrv_qx output: http://bpa.ksu.pl/pub/nutdrv_qx_load.on.txt (2kB)

 shutdown.return (S01R0001)
   - load is switched on immediately, the "Rxx" part does not matter,
   - "C" command can break the shutdown.
   - nutdrv_qx output: http://bpa.ksu.pl/pub/nutdrv_qx_shutdown.return.txt (7kB)

 shutdown.stayoff (S01)
   - "C" command will not break the shutdown.
   - nutdrv_qx output: http://bpa.ksu.pl/pub/nutdrv_qx_shutdown.stayoff.txt (7kB)
 

Unsupported command:
 Status Inquiry *disable (D)
   0.200806	send: D
   0.200815	read: D

 test.battery.start
     2070.664898	instcmd(test.battery.start, [NULL])
     2070.664919	send: T10
     2070.664933	read: T10
     2070.664944	instcmd: FAILED
 
 test.battery.start.deep
     2083.480425	instcmd(test.battery.start.deep, [NULL])
     2083.480476	send: TL
     2083.480493	read: TL
     2083.480504	instcmd: FAILED
 
 test.battery.start.quick
     2091.280535	instcmd(test.battery.start.quick, [NULL])
     2091.280593	send: T
     2091.280609	read: T
     2091.280620	instcmd: FAILED
 
 test.battery.stop
     2099.425817	instcmd(test.battery.stop, [NULL])
     2099.425865	send: CT
     2099.425882	read: CT
     2099.425907	instcmd: FAILED

Others:
 Temperature reported by UPS is set to constant value of 25.0C it is not real temperature.

Discharge and die sequence:
 http://bpa.ksu.pl/pub/nutdrv_qx_off.txt (209kB)
  
"upsc" output:
  on line: http://bpa.ksu.pl/pub/nutdrv_qx_upsc.txt (1kB)
  on battery: http://bpa.ksu.pl/pub/nutdrv_qx_upsc_OB.txt (1kB)

-- 
Best regards,
AWa.