<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hello,<br>
<br>
i try to setup NUT service to read/control my UPS but without
success.<br>
Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD
-u root start" i got:<br>
<br>
<blockquote>
<blockquote>
<div align="left"><i><small>Network UPS Tools - UPS driver
controller 2.6.2</small></i><br>
<i><small> 0.000000</small></i><br>
<i><small>If you're not a NUT core developer, chances are that
you're told to enable debugging</small></i><br>
<i><small>to see why a driver isn't working for you. We're
sorry for the confusion, but this is</small></i><br>
<i><small>the 'upsdrvctl' wrapper, not the driver you're
interested in.</small></i><br>
<i><small>Below you'll find one or more lines starting with
'exec:' followed by an absolute</small></i><br>
<i><small>path to the driver binary and some command line
option. This is what the driver</small></i><br>
<i><small>starts and you need to copy and paste that line and
append the debug flags to that</small></i><br>
<i><small>line (less the 'exec:' prefix).</small></i><br>
<i><small> 0.000348 Starting UPS: mustek</small></i><br>
<i><small> 0.000489 exec: /usr/local/ups/bin/blazer_ser
-a mustek -u root</small></i><br>
<i><small>Network UPS Tools - Megatec/Q1 protocol serial
driver 1.51 (2.6.2)</small></i><br>
<i><small>Unable to open auto: No such file or directory</small></i><br>
<i><small>Things to try:</small></i><br>
<i><small> - Check 'port=' in ups.conf</small></i><br>
<i><small> - Check owner/permissions of all parts of path</small></i><br>
<i><small>Fatal error: unusable configuration</small></i><br>
<i><small> 0.003411 Driver failed to start (exit
status=1)<br>
<br>
<br>
</small></i></div>
</blockquote>
</blockquote>
<div align="left"><i><small> </small></i>My "/usr/local/ups/etc/ups.conf"
contain:<br>
<br>
<blockquote>
<blockquote><small>user = root</small><br>
<small>[mustek]</small><br>
<small>driver = blazer_ser</small><br>
<small>port = auto</small></blockquote>
</blockquote>
</div>
<div align="left"><br>
UPS is connected over USB and log from "message" show next on
connect:<br>
<br>
<blockquote>
<blockquote><small>hiddev97: USB HID v1.00 Device [Cypress
Semiconductor USB to Serial] on usb-0000:00:1a.0-1<br>
<br>
<br>
</small></blockquote>
</blockquote>
<big>Can i get some help please? :)<br>
<br>
<br>
<br>
thank you.<br>
</big></div>
<blockquote>
<div align="left"><br>
</div>
</blockquote>
</body>
</html>