[Nut-upsuser] Eaton Powerware

[Peter Selinger]

Charles Lepple wrote:
> 
> On 5/9/06, John Anderson <john at drc.org.nz> wrote:
> > I then add bcmxcp_usb to the usb compile list in Makefile and when I run
> > ./configure and then make usb it resets itself so that bcmxcp_usb is not
> > on the list.
> 
> bcmxcp_usb is added to @USB_DRIVER_LIST@ by configure, but only if it
> finds a working libusb. You should not have to edit the Makefile (or
> Makefile.in) for 2.0.3.
> 
> Be sure that "libusb-config" is on your path. If not, you may only
> have the libusb runtime, and you will need to download the development
> package for your particular distribution, or install it from source.
> 
> Home page for libusb: http://libusb.sourceforge.net/ (use the stable
> 0.1.x branch, not the experimental 1.0 branch.)

But John said that newhidups was built, so this should not be the
problem. Have you tried:

cd drivers
make bcmxcp_usb

This also works for me. -- Peter