[Nut-upsuser] Tripplite SU2200XL
t004 at kbocek.com
Wed May 31 19:42:03 UTC 2006
I installed an SNMP web card in my Tripplite ups and here's what I get:
$upsc tripplite1-snmp at localhost
ups.mfr: Tripp Lite
The battery.voltage and input.frequency values appear to be off by a factor of 10.
Did you do anything special to your install?
Gregory Gulik wrote:
> I have a very similar UPS with the SNMP module and it works fine. Here
> are all the fields I get with upsc:
> battery.charge: 100.0
> battery.voltage: 040.8
> driver.name: snmp-ups
> driver.parameter.port: tripplite1
> driver.version: 2.0.0
> driver.version.internal: 0.40
> input.frequency: 059.9
> input.voltage: 115.0
> ups.firmware.aux: Tripp Lite 3.0.37 (GAPI 2.0)
> ups.load: 020.0
> ups.mfr: Tripp Lite
> ups.model: SMART1500RMXL2Ua
> ups.status: OL
> Kirk Bocek wrote:
>> Well, bummer. I was hoping to get this to work. Thanks for your help
>> I guess I'm going to have to spring for an SNMP module for this UPS.
>> Do you know if
>> Tripplite has done anything wonky in their implementation that would
>> cause a problem
>> with nut's SNMP interface?
More information about the Nut-upsuser