[Nut-upsuser] Ablerex 625L USB version

[Lau Kim Ping]

***********************
Your mail has been scanned by InterScan MSS.
***********************


Peter,

Thanks for your help.  I will email the manufacturer's engineer to see if he can help.

****

>On Sun, 24 Sep 2006 20:22:36 -0300 (ADT)
>selinger at mathstat.dal.ca (Peter Selinger) wrote:
>
>I don't know, this doesn't look so good. Your UPS reports "0" as the
>value for everything. I don't know what to do about it. -- Peter
>
>Lau Kim Ping wrote:
>> 
>> 
>> Peter,
>> 
>> Thank you very much for the patch.  After applying your patch, newhidups & upsd ran successfully.  The output of upsc is as follow:
>> 
>> driver.name: newhidups
>> driver.parameter.port: auto
>> driver.version: 2.1.0
>> unmapped.ablerexups.batterysystem.batterysystemid: 0
>> unmapped.ablerexups.batterysystem.presentstatus.good: 0
>> unmapped.ablerexups.batterysystem.presentstatus.used: 0
>> unmapped.ablerexups.batterysystem.temperature: 0
>> unmapped.ablerexups.batterysystem.test: 0
>> unmapped.ablerexups.batterysystem.voltage: 0
>> unmapped.ablerexups.flow.configactivepower: 0
>> unmapped.ablerexups.flow.configapparentpower: 0
>> unmapped.ablerexups.flow.configfrequency: 0
>> unmapped.ablerexups.flow.configvoltage: 0
>> unmapped.ablerexups.flow.delaybeforeshutdown: 0
>> unmapped.ablerexups.flow.delaybeforestartup: 0
>> unmapped.ablerexups.flow.flowid: 0
>> unmapped.ablerexups.flow.highvoltagetransfer: 0
>> unmapped.ablerexups.flow.imanufacturer: 0
>> unmapped.ablerexups.flow.iproduct: 0
>> unmapped.ablerexups.flow.iserialnumber: 0
>> unmapped.ablerexups.flow.lowvoltagetransfer: 0
>> unmapped.ablerexups.powerconverter.output.presentstatus.ablerex1: 0
>> ups.mfr: UIS Ablerex
>> ups.model: Ablerex USB Interface 049e
>> 
>> I then turned off the main switch & then ran upsc again.  Even the UPS was on battery, the output of upsc remained the same.  I was hopping at least one of the values would dropped to a negative value.  What should I do next?  Thanks.
>> 
>> ****
>> 
>> On Sat, 23 Sep 2006 16:06:37 -0300 (ADT)
>> selinger at mathstat.dal.ca (Peter Selinger) wrote:
>> 
>> >The patch I just sent may not work; please try this one instead. 
>> >-- Peter
>> >
>> 
>