[Nut-upsuser] APC 1500 USB problem

[Czuczy Gergely]

Hello,

We have two APC Back-UPS RS 1500 USB stuff, and i've got a bit
of a problem with it and NUT.

The usbdevs output:
addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion
addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion
(UPS1 and UPS2)

I've configured our NUT system to monitor the UPSes, and it went very
fine till the time had arrived for a test. UPS unpower (-> ONBAT), and
test what NUT does to the boxes connected to it.

After I've unplugged the power cable of UPS1, nut started not to notice
that on its cgi interface. It was showing a duplicate of the on-power 
UPS.

After this I've restarted the NUT ups daemon and thus the drivers along
with it. After this restart the drivers haven't been able to find any
suitable UPS for them. I've checked this in both the Linux2.6.19.2 box
it was running in, and in a FreeBSD 6.2-RELEASE-p2. On neither machine
could the driver handle the UPS.

I'm using the newhidups driver to handle these UPSes, since i haven't
been able to find the hidups driver, to check with that.

My question is, what is going on? :) I don't think that this is the
desired functionality of NUT, and we'd like to monitor 3 UPSes (1 is not
yet connected) with NUT, and handle our 7 servers with it in the office.

Technical details:

NUT version:
BSD box: Network UPS Tools upsd 2.0.5
Linux box: Network UPS Tools upsd 2.0.5

Driver config:
[ups1]
        driver = newhidups
        port = /dev/usb/hiddev0

[ups2]
        driver = newhidups
        port = /dev/usb/hiddev1

(this is the linux one. on FreeBSD, it's /dev/ugen{0,1})

startup output on the BSD box:
# /usr/local/etc/rc.d/nut start
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.0.5)

No matching HID UPS found
Driver failed to start (exit status=1)
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.0.5)

No matching HID UPS found
Driver failed to start (exit status=1)

If I've skipped some relevant part, please tell me, and I will
try to send it.

Looking forward for your help in order to make this work.

-- 
Your Sincerely

Gergely Czuczy
Publishing Factory Ltd
http://www.publishing.hu/