[Nut-upsuser] driver for my ups

[Alexander Fradiani]

> 
> Did you use the vendorid and subdriver options? Please post the full
> command line. 

i tried the upsdrvctl command, with this configuration
ups.conf:
    [miUPS]
            driver = megatec_usb
            vendorid = 0665
            subdriver = agiler
            port = /dev/bus/usb/001/002

also tried using port "auto".
the result is the same message i posted in the previous message. so this is what i have:
#upsdrvctl -DD start
"Network UPS Tools - UPS driver controller 2.2.0-
 Starting UPS: miUPS
 exec: /lib/nut/megatec_usb -a miUPS 
 Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4           [megatec_usb]
 Carlos Rodrigues (c) 2003-2007
 Serial-over-USB transport layer for Megatec protocol driver   [megatec_usb]
No supported devices found. Please check your device availability  with 'lsusb'
Driver failed to start (exit status=1) "

I still have hopes that this ups can work properly with nut. meanwhile, i have to turn off the pc's at night because i'm not in a stable zone. 

_________________________________________________________________
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy!
http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20070917/04814674/attachment.htm