[Nut-upsuser] OMNIPLUS1000LCD is "unavailable"

[Arjen de Korte]

Citeren Kenneth R Litko <ken at litkoaero.com>:

> OK... Thank you Arjen.
>
> I've killed the extra processes... But have some new problems. And I still
> cannot connect to the device.
>
> If I run upsdrvctl start (with or without '-u root'):
>
> ------
> klitko at bigdog:/etc/nut$ sudo upsdrvctl start
> Network UPS Tools - UPS driver controller 2.2.1-
> Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1-)
>
> Using subdriver: TrippLite HID 0.2 (experimental)
> Startup timer elapsed, continuing...

This could be due to a problem with handling interrupt reports. If  
memory serves, Tripplite UPSes are broken in this aspect (and generate  
this continuously), so you may be hit by this.

There was a fix for this in nut-2.2.2 (it limits reading them to 32),  
so it would be worthwhile to check if upgrading helps.

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.