[Nut-upsuser] Belkin F6C550-AVR on Squeeze

[Josu Lazkano]

Hello list, I am trying to configure Belkin F6C550-AVR UPS on a Squeeze server.

I try with "usbhid-ups" but I get "(driver(s) failed)" message on service start.

This is my config:

nano /etc/nut/nut.conf
MODE=standalone

nano /etc/nut/ups.conf
[belkin]
driver = usbhid-ups
#driver = megatec_usb
port = auto

nano /etc/nut/upsd.conf
LISTEN 127.0.0.1 3493

nano /etc/nut/upsmon.conf
MONITOR belkin at localhost 1 admin pass master

nano /etc/nut/upsd.users
[admin]
        password = pass
        actions = SET
        instcmds = ALL
        allowfrom = localhost
        upsmon master

This is my lsusb output:

$ lsusb
Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial

Can you help with this? I am reading lots of tutorial and howtos but
there is no way to get it working.

Thanks for your help and best regards.

-- 
Josu Lazkano