[Nut-upsuser] libusb not recognized?

Charles Lepple clepple at gmail.com
Fri Nov 11 12:59:09 UTC 2011


[Andrew: please subscribe to the nut-upsuser list:
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
Also, please gzip any attached logs.]

>  Hello,
>
>     I downloaded NUT ver 2.6.2 and tried it on my Linux development  
> board. when I configure and it notified me that "USB drivers  
> requested, but libusb not found."
>     Then I download libusb v1.0.8 and install it to my board, and re- 
> configure NUT, still "USB drivers requested, but libusb not found".  
> I look into config.log, and found that usb.h not found.
>     I tried Google and install libusb-compat. Then usb.h was found,  
> and libusb version is recognized. However, still "USB drivers  
> requested, but libusb not found"...

Correct, NUT is only designed to work with the libusb-0.1 API  
(provided by libusb-compat).

>
>     I could not fing any more solution of that. Therefore, I turn to  
> developers. config.log is attached. Here are my hardware and  
> software configurations:
> CPU: Marvell 88E6281 with ARM926ejs
> Linux ver: 2.6.31.8
> cinfigure commnd:
> ./configure --with-usb --with-doc \
> --host=arm-mv5sft-linux-gnueabi \
> --prefix=/mnt/ARM_FS \
>
How did you install libusb-1.0? It appears that the actual .so file  
was not installed properly:

configure:7259: checking for libusb version via pkg-config
configure:7278: result: 0.1.12 found
configure:7281: checking for libusb cflags
configure:7298: result: -I/mnt/ARM_FS/include
configure:7301: checking for libusb ldflags
configure:7318: result: -L/mnt/ARM_FS/lib -lusb
configure:7323: checking for usb.h
configure:7323: arm-mv5sft-linux-gnueabi-gcc -c -I/mnt/ARM_FS/ 
include    conftest.c >&5
configure:7323: $? = 0
configure:7323: result: yes
configure:7338: checking for usb_init
configure:7338: arm-mv5sft-linux-gnueabi-gcc -o conftest -I/mnt/ARM_FS/ 
include     conftest.c -L/mnt/ARM_FS/lib -lusb   >&5
/root/uboot_NAS/cross/bin/../lib/gcc/arm-mv5sft-linux-gnueabi/ 
4.3.2/../../../../arm-mv5sft-linux-gnueabi/bin/ld: warning:  
libusb-1.0.so.0, needed by /mnt/ARM_FS/lib/libusb.so, not found (try  
using -rpath or -rpath-link)
/mnt/ARM_FS/lib/libusb.so: undefined reference to `libusb_clear_halt'
/mnt/ARM_FS/lib/libusb.so: undefined reference to  
`libusb_get_device_address'
/mnt/ARM_FS/lib/libusb.so: undefined reference to `libusb_close'
/mnt/ARM_FS/lib/libusb.so: undefined reference to `libusb_unref_device'
[...]

The libusb-1.0.so.0 file should be in the same directory as libusb.so,  
meaning that -rpath* options shouldn't be necessary. But if there is  
something special about the way libusb was installed (packaging, etc.)  
then you might need to fiddle with those options.

>
>    Any suggestions?
>    Thanks!
>
>
> Best Regards
> --
> Andrew Chang
> 2011-11-09
>
>
>
> <config.log>
>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config.log.gz
Type: application/x-gzip
Size: 9959 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20111111/51b2aa0d/attachment.bin>


More information about the Nut-upsuser mailing list