[Nut-upsuser] mge-utalk ESV8+ comm problem

[Ivo Karabojkov]

Hi, Arnaud!

As my ESV8+ woprks now I produced two debug outputs - before and after 
applying the patch.
In the next few days I'll do my best to send outputs with Pulsar ES11 
and EL.
I remember with the original (non-patched) driver ES11  didn't work well 
and driver issued messages "could not get multtiplier table, using raw 
readings".

I hope this helps.

Best wishes,
Ivo

On 20.10.2012 14:23 ч., Arnaud Quette wrote:
>
> 2012/10/19 Ivo Karabojkov <karabojkov at kit.bg <mailto:karabojkov at kit.bg>>
>
>     Hi!
>
>
> Hi Ivo,
>
>     Here is my Debug (-DDDD) output of mge-utalk during the
>     malfunction. Do you want to capture new one (when it works)?
>
>
> I would prefer to see the output with the patch I sent.
> to apply it, go into the NUT source dir. and:
> $ patch -p0 < utalk-zz500ms.diff
>
> then make and test as usual.
>
> cheers,
> Arnaud
> -- 
> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.fr
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121021/a340a750/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mge_utalk_not-patched.tar.gz
Type: application/x-gzip
Size: 5662 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121021/a340a750/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mge_utalk_patched.tar.gz
Type: application/x-gzip
Size: 5423 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121021/a340a750/attachment-0001.bin>