[Nut-upsuser] Installing NUT for PowerWalker VI 1500 LCD

[Danijel Šili]

Since the provided drivers come with absolutely no installation
instructions, I turned to NUT.

The compatibility list says "blazer_usb" should be used for PowerWalker's
devices, so that's what I put in my conf:

[pwvi]
        driver = blazer_usb
        port = auto
        desc = "PowerWalker VI 1500 LCD"

Since I use Ubuntu Server 13.10 so I installed nut from apt.

The product information PDF for the device in quesetion is
http://www.powerwalker.com/datasheet/Line-Interactive/PowerWalker%20VI%201500%20LCD.pdf

Below is the output from several commands:
I tried to look through the maillist archives but found nothing useful.

$ sudo upsdrvctl

Network UPS Tools - UPS driver controller 2.6.4
Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4)
No supported devices found. Please check your device availability with
'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these
options
(man 8 blazer).

Driver failed to start (exit status=1)

$ sudo /lib/nut/blazer_usb -DD -a pwvi

Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4)
   0.000000     debug level is '2'
   0.162399     Checking device (1D6B/0001) (003/001)
   0.226303     - VendorID: 1d6b
   0.226814     - ProductID: 0001
   0.227249     - Manufacturer: unknown
   0.227696     - Product: unknown
   0.228174     - Serial Number: unknown
   0.228621     - Bus: 003
   0.229088     Trying to match device
   0.229544     Device does not match - skipping
   0.230051     Checking device (1D6B/0002) (002/001)
   0.254327     - VendorID: 1d6b
   0.254361     - ProductID: 0002
   0.254372     - Manufacturer: unknown
   0.254382     - Product: unknown
   0.254392     - Serial Number: unknown
   0.254402     - Bus: 002
   0.254412     Trying to match device
   0.254425     Device does not match - skipping
   0.254450     Checking device (1D6B/0002) (001/001)
   0.254529     - VendorID: 1d6b
   0.254541     - ProductID: 0002
   0.254551     - Manufacturer: unknown
   0.254561     - Product: unknown
   0.254571     - Serial Number: unknown
   0.254581     - Bus: 001
   0.254590     Trying to match device
   0.254602     Device does not match - skipping
   0.254616     No appropriate HID device found
   0.254636     No supported devices found. Please check your device
availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these
options
(man 8 blazer).

$ lsusb

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 006: ID 0665:5161 Cypress Semiconductor USB to Serial
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Thanks for any help or guidance you can give me,
Shinhan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20131128/3abb3282/attachment.html>