[Nut-upsuser] Fry's Electronics UPS...

[hyouko at gmail.com]

2015-04-23 19:16 GMT+02:00 James Hammond <james_r_hammond at hotmail.com>:
> #lsusb
>
> Bus 001 Device 003: ID 0001:0000 Fry's Electronics

[...]

>   iManufacturer           1 ATCL FOR UPS
>   iProduct                1 ATCL FOR UPS
>   iSerial                 1 ATCL FOR UPS

[...]

> root at unifi:/lib/nut# ./blazer_usb -DD -a nutdev1
> Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1)
>    0.000000     debug level is '2'

[...]

>    0.244816     Checking device (0001/0000) (001/003)
>    0.244939     - VendorID: 0001
>    0.244961     - ProductID: 0000
>    0.244973     - Manufacturer: unknown
>    0.244984     - Product: unknown
>    0.244992     - Serial Number: unknown
>    0.245003     - Bus: 001
>    0.245015     Trying to match device
>    0.245134     Device does not match - skipping

What happened to the iManufacturer/iProduct/iSerialNumber strings?
Try removing the 'product'/'serial'/'vendor'/'bus' lines from here:

> [nutdev1]
>         driver = "blazer_usb"
>         port = "auto"
>         vendorid = "0001"
>         productid = "0000"
>         product = "ATCL FOR UPS"
>         serial = "ATCL FOR UPS"
>         vendor = "ATCL FOR UPS"
>         bus = "001"

Then try again.
(I'm not expecting it to work but.. who knows..)

> Is there anything else I can try or just forget it?

It could work with drivers 'nutdrv_atcl_usb' (available since NUT
version 2.7.2) or with 'nutdrv_qx' (since 2.7.3).