[Nut-upsuser] UPS/NUT with openSUSE 13.1

[Rob Groner]

And now....suddenly, and so far unexplainably....it works again.  I did the same as before, installed openSUSE 13.1 from scratch, then installed the libusb* libraries.  And now...it works, so far reliably.

I'm certain that there is some micro-step I started doing different than last time.  For example, I used to install jedit from the command line after install, but I had started installing it at the same time as the OS install.  There's NO WAY that should make a difference....but it certainly could be.

I also discovered that the "#! /bin/bash"  comment at the top of the shutdown script file was crucial...who knew?

Thank you all for the patient help.  I'm now putting the system through some systematic shutdown testing to make sure it's good, and then I'll start again from scratch and make sure I can repeat it, and then I'll finally be able to move on with wrapping this thing up.

Rob Groner
Software Engineer Level II

RTD Embedded Technologies, Inc.
ISO 9001 and AS9100 Certified
Ph: +1 814-234-8087
www.rtd.com

> -----Original Message-----
> From: Nut-upsuser [mailto:nut-upsuser-
> bounces+rgroner=rtd.com at lists.alioth.debian.org] On Behalf Of Rob Groner
> Sent: Wednesday, September 23, 2015 9:02 AM
> To: Charles Lepple <clepple at gmail.com>
> Cc: nut-upsuser Mailing List <nut-upsuser at lists.alioth.debian.org>
> Subject: Re: [Nut-upsuser] UPS/NUT with openSUSE 13.1
> 
> 
> >As I am not familiar with openSUSE's ldconfig, is there an /etc/ld.so.conf or
> /etc/ld.so.conf.d/* entry >pointing to /usr/local/lib64? I am not sure if libusb-
> 0.1 tries to rerun ldconfig after installing, but if after >uninstalling libusb-
> compat, there are problems linking to the real libusb-0.1, then it can't hurt to
> re-run >ldconfig (as root).
> 
> There's actually both of those things....ld.so.conf and the ld.so.conf.d
> directory.  There are entries in the ld.so.conf file for /usr/local/lib and
> /usr/local/lib64.
> 
> 
> Rob Groner
> Software Engineer Level II
> 
> RTD Embedded Technologies, Inc.
> ISO 9001 and AS9100 Certified
> Ph: +1 814-234-8087
> www.rtd.com
> 
> 
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser