[Nut-upsuser] setting up CYBERPOWER CP1500PFCLCD

[Tomasz Przychodzień]

This was only the log from the program. I'm sending my upsmon.conf attached
(I removed nas ip number, admin login and pass (no spaces in parameters)
and also changed back minsupplies to 1), the rest of the settings are the
same as I used.

Best,
Tom

2016-10-26 14:21 GMT+02:00 Charles Lepple <clepple at gmail.com>:

> On Oct 26, 2016, at 4:56 AM, Tomasz Przychodzień wrote:
> >
> > Level     INFO    10/26/2016 10:46:17    Detected OS as Windows NT
> > Level   NOTICE    10/26/2016 10:46:17    Network UPS Tools upsmon 2.0.0.4
> > Level     INFO    10/26/2016 10:46:17    Config Load: MINSUPPLIES set to
> 1
> > Level     INFO    10/26/2016 10:46:17    Config Load: NOTIFYCMD set to
> "c:\Program Files\WinNUT\alertPopup.exe"
> > Level     INFO    10/26/2016 10:46:17    Config Load: POLLFREQ set to 5
> > Level     INFO    10/26/2016 10:46:17    Config Load: POLLFREQALERT set
> to 5
> > Level     INFO    10/26/2016 10:46:17    Config Load: HOSTSYNC set to 15
> > Level     INFO    10/26/2016 10:46:17    Config Load: DEADTIME set to 15
> > Level     INFO    10/26/2016 10:46:17    Config Load: RBWARNTIME set to
> 43200
> > Level     INFO    10/26/2016 10:46:17    Config Load: NOCOMMWARNTIME set
> to 300
> > Level     INFO    10/26/2016 10:46:17    Config Load: FINALDELAY set to 5
>
> I'm not as familiar with WinNUT, but I assume that your MONITOR line
> should be listed here.
>
> If any of the parameters have spaces in them (i.e. the password), make
> sure they are in quotes.
>
> > Level CRITICAL    10/26/2016 10:46:17    Fatal error: insufficient power
> configured!
> > Level CRITICAL    10/26/2016 10:46:17    Sum of power values........: 0
> > Level CRITICAL    10/26/2016 10:46:17    Minimum value (MINSUPPLIES): 1
> > Level CRITICAL    10/26/2016 10:46:17
> > Edit your upsmon.conf and change the values.
> >
> > Should I change MINSUPPLIES to 0? (WinNUT runs then - has "Running as
> Application" status - how can I test if it's really working?). Does it make
> any sense to have MINSUPPLIES at 0?
>
> Given your original description (send a signal to the PC to shut it dow
> during a power outage), MINSUPPLIES should be 1.
>
> The upsmon.conf documentation describes the case where you might set
> MINSUPPLIES to 0 in order to monitor an UPS that is not powering the
> computer: http://networkupstools.org/docs/man/upsmon.conf.html
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161026/9d29c01f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: upsmon.conf
Type: application/octet-stream
Size: 10424 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161026/9d29c01f/attachment-0001.obj>