<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<div class="moz-text-html" lang="x-western"> Udo van den Heuvel
schreef:
<blockquote cite="mid45BCD772.4020504@xs4all.nl" type="cite">
<pre wrap="">Arjen de Korte wrote:
</pre>
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">This suggests that sweex doesn't know what UPS'es they are actually
shipping. Or to stupid to include the right manual..
</pre>
</blockquote>
<pre wrap="">Spot on. I have told them this more than two years ago, but apparently
they just don't care about it. They are notorious for not caring at all
about this... :-(
</pre>
</blockquote>
<pre wrap=""><!---->
Did you try the Powermust driver?
It works OK with my Sweex 800VA UPSses.
</pre>
</blockquote>
No i did not.
<blockquote cite="mid45BCD772.4020504@xs4all.nl" type="cite"></blockquote>
And ... drum rolls..<br>
<br>
Hurray it works. Both Mustek and the newer Megatec driver worked.<br>
<br>
So i am the proud owner of a Mustek UPS.<br>
<br>
for future reference. I used <br>
user=nut<br>
[sweex]<br>
driver = mustek<br>
port = /dev/ttyS0<br>
desc = "Sweex 1000VA UPS"<br>
<br>
and<br>
user=nut <br>
[sweex]<br>
driver = megatec<br>
port = /dev/ttyS0<br>
desc = "Sweex 1000VA UPS"<br>
<br>
<br>
I am using the megatec driver now because it has the most features.<br>
<br>
<br>
Thank you all very much!<br>
<br>
Greetings Herman.<br>
<br>
------------<br>
warning boring stuf below<br>
<br>
<br>
Network UPS Tools - mustek UPS driver 0.2 (2.0.5)<br>
This driver is obsolete and has been replaced by the "megatec" driver.
It will be removed somewhere in the near future.<br>
Syncing with UPS: . done<br>
Identifying UPS: . done<br>
Detected UPS on /dev/ttyS0<br>
<br>
/usr/local/ups/bin/upsc sweex@localhost<br>
battery.charge: 80.0<br>
battery.voltage: 12.9<br>
driver.name: mustek<br>
driver.parameter.port: /dev/ttyS0<br>
driver.version: 2.0.5<br>
driver.version.internal: 0.2<br>
input.frequency: 50.0<br>
input.voltage: 222.8<br>
output.voltage: 222.8<br>
ups.load: 026<br>
ups.mfr: Mustek<br>
ups.model: PowerMust<br>
ups.status: OL<br>
<br>
<br>
<br>
Using the megatec driver i got:<br>
nut@systemoperator:/usr/local/ups/etc$ /usr/local/ups/bin/upsc
sweex@localhost<br>
battery.charge: 80.0<br>
battery.voltage: 12.90<br>
battery.voltage.nominal: 12.0<br>
driver.name: megatec<br>
driver.parameter.port: /dev/ttyS0<br>
driver.version: 2.0.5<br>
driver.version.internal: 1.5<br>
input.frequency: 49.9<br>
input.voltage: 221.9<br>
input.voltage.fault: 165.0<br>
input.voltage.maximum: 222.0<br>
input.voltage.minimum: 221.4<br>
output.voltage: 221.9<br>
output.voltage.nominal: 220.0<br>
ups.beeper.status: disabled<br>
ups.delay.shutdown: 0<br>
ups.delay.start: 2<br>
ups.load: 26.0<br>
ups.mfr:<br>
ups.model: SMART UPS VER:1.00<br>
ups.serial: unknown<br>
ups.status: OL<br>
ups.temperature: 28.5<br>
<br>
</div>
</body>
</html>