Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine.<br>I've followed all the basic guides on setting up NUT and UPS' but have had no luck. <br><br>My current
ups.conf is:<br>[cyberpower-gentoo]<br> driver = cyberpower<br> port = /dev/ttyS0<br> desc = Workstation<br><br><br>Upon running /etc/init.d/upsd start or upsdrv start I get:<br><br> * Starting UPS drivers ...
<br>Network UPS Tools - UPS driver controller 2.2.0<br>Network UPS Tools - CyberPower driver 1.00 (2.2.0)<br>Giving up on hardware detection after 3 tries<br>Unable to get initial hardware info string<br>Driver failed to start (exit status=1)
<br> * Failed to start UPS drivers! <br><br><br>I know it's on ttyS0(I only have one port, but the other 3 ttyS' compiled in the kernel timeout after about 1 second). ttyS0 takes about 15seconds to timeout.<br>I also tried connecting it via USB but had no luck either, don't believe its supported for this model. Have also tried powerpanel and cpsups drivers.
<br><br>Any advice here, would be much appreciated! Thank you!<br>