<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Tomas<br>
<br>
Thanks for the offer of the fixed udev rules. Please do send - with any
instructions I might need to install it. I'll let you know how it goes.
It appears that my email address is published on this thread anyway.<br>
<br>
BTW: You may have followed this thread from when I was trying to get it
going on the serial port - and that wasn't working either. Out of
interest - I checked the permissions on the serial port ttys0 - and
they did appear to be set as you said the USB port should. I assume
that means the serial port problem I had was something different. I
probably should try launching the serial driver (BelkinUnv) in debug
mode to see if I can find out what the problem is there. If I find
anything - I will also let you know.<br>
<br>
Best regards and many thanks.<br>
<br>
Richard.<br>
<br>
Tomáš Smetana wrote:
<blockquote
cite="mid:20071127085109.272d20be@dhcp-lab-165.englab.brq.redhat.com"
type="cite">
<pre wrap="">On Tue, 27 Nov 2007 16:01:26 +0900
Richard Chapman <a class="moz-txt-link-rfc2396E" href="mailto:rchapman@aardvark.com.au"><rchapman@aardvark.com.au></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi Tomas and Arjen
Thanks for your very expert assistance....
We are definitely getting close to solving this. Maybe there is a
packaging problem - or maybe there is a problem somewhere else in my
system.
If I track down the ups usb port - and change the permissions of the
/dev/bus/usb/xxx/yyy as suggested by Tomas - everything works fine -
as far as I can tell so far at least.
</pre>
</blockquote>
<pre wrap=""><!---->
I have a fixed udev rules file (I can send it to you off-list) that
should fix the problem. Unfortunately I don't have a RHEL-5 system
with usb UPS anywhere around, so it may take some time for me to test
it. After I do so I'll push an updated package to EPEL.
As for the removal of nut from RHEL: I don't know anything else about
the decision than you do.
Regards.
</pre>
</blockquote>
<br>
</body>
</html>