No luck unfortunately :-(<br><br>-------------------<br>[myups]<br> driver = megatec_usb<br> port = auto<br> bus=001<br> vendorid = 0f03<br> productid = 0001<br> subdriver = agiler
<br> desc = "Unitek Alpha 1200sx"<br>-------------------<br>[root@www www]# /sbin/upsdrvctl -DD start<br>Network UPS Tools - UPS driver controller 2.2.0-<br>Starting UPS: myups<br>exec: /sbin/megatec_usb -a myups
<br>Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]<br>Carlos Rodrigues (c) 2003-2007<br><br>Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]<br><br>No supported devices found. Please check your device availability with 'lsusb'
<br>and make sure you have an up-to-date version of NUT. If this does not help,<br>try running the driver with at least 'vendorid' and 'subdriver' options<br>specified. Please refer to the man page for details about these options
<br>(man 8 megatec_usb).<br>Please report your results to the NUT user's mailing list<br><<a href="mailto:nut-upsuser@lists.alioth.debian.org">nut-upsuser@lists.alioth.debian.org</a>>.<br>-----------------------------
<br>I've also tried changing the subdriver with no luck. The other options I specified I *think* are ok from the lsusb output. <br><br>The strange thing is that this fails really fast...it's as though it's not even trying to detect the ups....
<br><br>Joe<br><br><br><div class="gmail_quote">On Jan 2, 2008 7:51 PM, Carlos Rodrigues <<a href="mailto:carlos.efr@mail.telepac.pt">carlos.efr@mail.telepac.pt</a>> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="Ih2E3d">On Jan 2, 2008 6:35 PM, Joseph Borg <<a href="mailto:juu.borg@gmail.com">juu.borg@gmail.com</a>> wrote:<br>> This therefore seems to me like some serial-over-usb type protocol. I'm therefore unsure as to what driver to try and use (megatec, megatec_usb) and what device to point it to /dev/ttyS?
<br><br></div>If that UPS has only an USB connection, then megatec doesn't work.<br>"megatec_usb" might work, and the port should be "auto". If it doesn't<br>detect your UPS on the first try, check out the additional options for
<br>the driver.<br><br>--<br><font color="#888888">Carlos Rodrigues<br></font></blockquote></div><br>