Hello,<br>I own some Ablerex MARS 3000 (MS3000RT) UPS.<br>Following the thread here :<br><a href="http://osdir.com/ml/monitoring.nut.user/2006-04/msg00091.html">http://osdir.com/ml/monitoring.nut.user/2006-04/msg00091.html</a><br>
I would have the following issues :<br>1. The battery charge displayed seems wrong : It always shows 100.0 - even when the battery is disconnected for replacement.<br>2. Battery voltage 2.29 is also static ...and wrong. The initial assumption of being the voltage per unit seems wrong : the ups uses  8 x 12V batteries. 8*12 = 96V , same as  battery.voltage.nominal: which is correct.<br>
The initial poster seems to have more credible results at least regarding the battery.charge: variable, however in my case the value is wrong.<br><br>System params :<br><br>#upsc Ablerex2<br>battery.charge: 100.0<br>battery.voltage: 2.29<br>
battery.voltage.nominal: 96.0<br><a href="http://driver.name">driver.name</a>: megatec<br>driver.parameter.pollinterval: 2<br>driver.parameter.port: /dev/ttyUSB0<br>driver.version: 2.2.0-<br>driver.version.internal: 1.5.4<br>
input.frequency: 50.0<br>input.voltage: 227.1<br>input.voltage.fault: 190.0<br>input.voltage.maximum: 230.6<br>input.voltage.minimum: 216.5<br>output.voltage: 221.3<br>output.voltage.nominal: 220.0<br>ups.beeper.status: disabled<br>
ups.delay.shutdown: 0<br>ups.delay.start: 2<br>ups.load: 95.0<br>ups.mfr: Ablerex<br>ups.model: MS3000RT MS02035C<br>ups.serial: unknown<br>ups.status: OL<br>ups.temperature: 55.8<br><br>Any ideea about the cause of the anomalies ? <br>
<br><br>Thank you in advance.<br>