[root@saboteur ~]# /sbin/blazer_ser -DDDDD -a inform send_to_all: SETINFO driver.parameter.port "/dev/ttyS1" debug level is '5' Trying megatec protocol... send: Q1 read: (210.5 140.0 244.5 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO input.voltage.fault "140.0" send_to_all: SETINFO output.voltage "244.5" send_to_all: SETINFO ups.load "28" send_to_all: SETINFO input.frequency "50.0" send_to_all: SETINFO battery.voltage "27.00" send_to_all: SETINFO ups.temperature "25.0" send_to_all: SETINFO beeper.status "disabled" send_to_all: SETINFO ups.type "offline / line interactive" send_to_all: SETINFO ups.status "OL BOOST" Status read in 1 tries Supported UPS detected with megatec protocol send: F read: #230.0 0.0 024.0 50.0 send_to_all: SETINFO input.voltage.nominal "230" send_to_all: SETINFO input.current.nominal "0.0" send_to_all: SETINFO battery.voltage.nominal "24.0" send_to_all: SETINFO input.frequency.nominal "50" Ratings read in 1 tries send: I read: # IN01064B send_to_all: SETINFO ups.mfg "" send_to_all: SETINFO ups.model "" send_to_all: SETINFO ups.firmware "IN01064B" Vendor information read in 1 tries Battery runtime will not be calculated (runtimecal not set) send_to_all: SETINFO ups.delay.start "180" send_to_all: SETINFO ups.delay.shutdown "30" send_to_all: ADDCMD beeper.toggle send_to_all: ADDCMD load.off send_to_all: ADDCMD load.on send_to_all: ADDCMD shutdown.return send_to_all: ADDCMD shutdown.stayoff send_to_all: ADDCMD shutdown.stop send_to_all: ADDCMD test.battery.start send_to_all: ADDCMD test.battery.start.deep send_to_all: ADDCMD test.battery.start.quick send_to_all: ADDCMD test.battery.stop send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send_to_all: DATAOK dstate_init: sock /var/run/nut/blazer_ser-inform open on fd 5 send_to_all: SETINFO driver.version "2.4.1" send_to_all: SETINFO driver.version.internal "1.51" send_to_all: SETINFO driver.name "blazer_ser" send_to_all: SETINFO driver.parameter.pollinterval "2" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (210.5 140.0 244.5 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO output.voltage "244.5" send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send_to_all: SETINFO ups.load "28" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.5 140.0 244.5 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO output.voltage "244.5" send_to_all: SETINFO ups.load "28" send: Q1 read: (210.5 140.0 244.5 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send_to_all: SETINFO ups.load "28" send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (000.0 140.0 208.5 036 47.0 25.0 25.0 10001000 send_to_all: SETINFO input.voltage "0.0" send_to_all: SETINFO output.voltage "208.5" send_to_all: SETINFO ups.load "36" send_to_all: SETINFO input.frequency "47.0" send_to_all: SETINFO battery.voltage "25.00" send_to_all: SETINFO ups.status "OB" send: Q1 read: (000.0 140.0 220.0 036 47.0 24.0 25.0 10001000 send_to_all: SETINFO output.voltage "220.0" send_to_all: SETINFO battery.voltage "24.00" send: Q1 read: (000.0 140.0 230.0 040 47.0 23.0 25.0 10001000 send_to_all: SETINFO output.voltage "230.0" send_to_all: SETINFO ups.load "40" send_to_all: SETINFO battery.voltage "23.00" send: Q1 read: (000.0 140.0 230.0 040 47.0 23.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 23.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 039 47.0 23.0 25.0 10001000 send_to_all: SETINFO ups.load "39" send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send_to_all: SETINFO ups.load "40" send_to_all: SETINFO battery.voltage "24.00" send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 24.0 25.0 10001000 send: Q1 read: (000.0 140.0 230.0 040 47.0 23.0 25.0 10001000 send_to_all: SETINFO battery.voltage "23.00" send: Q1 read: (210.5 140.0 244.5 029 50.0 25.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO output.voltage "244.5" send_to_all: SETINFO ups.load "29" send_to_all: SETINFO input.frequency "50.0" send_to_all: SETINFO battery.voltage "25.00" send_to_all: SETINFO ups.status "OL BOOST" send: Q1 read: (210.5 140.0 244.5 028 50.0 25.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (210.5 140.0 244.5 029 50.0 25.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.5 140.0 244.5 029 50.0 26.0 25.0 00101000 send_to_all: SETINFO battery.voltage "26.00" send: Q1 read: (210.5 140.0 244.5 029 50.0 26.0 25.0 00101000 send: Q1 read: (210.5 140.0 244.5 029 50.0 26.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send: Q1 read: (210.5 140.0 244.5 029 50.0 26.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO output.voltage "244.5" send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 028 50.0 26.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (210.0 140.0 244.0 029 50.0 26.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send_to_all: SETINFO battery.voltage "27.00" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (210.5 140.0 244.5 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO output.voltage "244.5" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send: Q1 read: (210.0 140.0 244.0 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 027 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "27" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO ups.load "28" send: Q1 read: (210.5 140.0 244.5 029 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.5" send_to_all: SETINFO output.voltage "244.5" send_to_all: SETINFO ups.load "29" send: Q1 read: (210.0 140.0 244.0 028 50.0 27.0 25.0 00101000 send_to_all: SETINFO input.voltage "210.0" send_to_all: SETINFO output.voltage "244.0" send_to_all: SETINFO ups.load "28" ^CSignal 2: exiting