Hi all,<br><br>This is my first experience with NUT.<br>I'm trying to test a Liebert PSA 1500 UPS, connected via USB to a single PC.<br>I have followed the instruction in the "Configuration" section of the online user manual.<br>
<br>Everything seems to be fine, except that, when I run "upsc
liebert@localhost ups.status", it retuns "OB", even if the UPS is
currently online.<br><br>Here are the information related to my system:<br>
<ul><li>Debian 6.0 on Intel Pentium 4; kernel version 2.6.32-5-686;</li><li>NUT version 2.4.3-1.1squeeze1, installed with package system;</li><li>UPS: Liebert PSA1500MT3-230U</li></ul>My ups.conf is the following:<br>[liebert]<br>
driver = usbhid-ups<br> port = auto<br> desc = "Liebert PSA1500MT3 UPS"<br><br>The result of "upsdrvctl start" is:<br><div style="margin-left: 40px;">Network UPS Tools - UPS driver controller 2.4.3<br>
Network UPS Tools - Generic HID driver 0.34 (2.4.3)<br>USB communication driver 0.31<br>Using subdriver: Belkin HID 0.12<br></div><br>The result of "upsd" is:<br><div style="margin-left: 40px;">Network UPS Tools upsd 2.4.3<br>
listening on 127.0.0.1 port 3493<br>listening on ::1 port 3493<br>Connected to UPS [liebert]: usbhid-ups-liebert<br></div><br>The complete list obtained with "upsc" is:<br><div style="margin-left: 40px;">battery.charge.low: 38<br>
battery.charge.warning: 38<br>battery.type: PbAc<br>device.mfr: Emerson Network Power<br>device.model: LiebertPSA<br>device.serial:<br>device.type: ups<br><a href="http://driver.name/" target="_blank">driver.name</a>: usbhid-ups<br>
driver.parameter.pollfreq: 30<br>
driver.parameter.pollinterval: 2<br>driver.parameter.port: auto<br>driver.version: 2.4.3<br>driver.version.data: Belkin HID 0.12<br>driver.version.internal: 0.34<br>ups.mfr: Emerson Network Power<br>ups.model: LiebertPSA<br>
ups.productid: 0001<br>ups.serial:<br>ups.status: OB<br>ups.vendorid: 10af<br></div><br>What problem could be there?<br><br>I would like to paste also a complete tracing of "/lib/nut/usbhid-ups -DDDDD -a liebert", but the message would become too big.<br>
Please tell me if there is any relevant portion that I could paste here.<br>Thanks in advance for your help.<br>Pier<br><br>