Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0) 0.000000 send_to_all: SETINFO driver.parameter.port "auto" 0.000056 debug level is '5' 0.132441 Checking device (1D6B/0003) (004/001) 0.132483 - VendorID: 1d6b 0.132490 - ProductID: 0003 0.132495 - Manufacturer: unknown 0.132501 - Product: unknown 0.132506 - Serial Number: unknown 0.132511 - Bus: 004 0.132516 Trying to match device 0.132522 Device does not match - skipping 0.132531 Checking device (1D6B/0003) (003/001) 0.132547 - VendorID: 1d6b 0.132553 - ProductID: 0003 0.132559 - Manufacturer: unknown 0.132564 - Product: unknown 0.132569 - Serial Number: unknown 0.132574 - Bus: 003 0.132579 Trying to match device 0.132584 Device does not match - skipping 0.132592 Checking device (8087/0024) (002/002) 0.132605 - VendorID: 8087 0.132610 - ProductID: 0024 0.132615 - Manufacturer: unknown 0.132621 - Product: unknown 0.132626 - Serial Number: unknown 0.132630 - Bus: 002 0.132635 Trying to match device 0.132641 Device does not match - skipping 0.132648 Checking device (1D6B/0002) (002/001) 0.132663 - VendorID: 1d6b 0.132669 - ProductID: 0002 0.132674 - Manufacturer: unknown 0.132679 - Product: unknown 0.132684 - Serial Number: unknown 0.132689 - Bus: 002 0.132694 Trying to match device 0.132699 Device does not match - skipping 0.132706 Checking device (0665/5161) (001/010) 0.136925 - VendorID: 0665 0.136941 - ProductID: 5161 0.136948 - Manufacturer: Cypress Semiconductor 0.136954 - Product: USB to Serial 0.136960 - Serial Number: unknown 0.136965 - Bus: 001 0.136971 Trying to match device 0.136977 Device matches 0.136990 failed to claim USB device: could not claim interface 0: Device or resource busy 0.193524 detached kernel driver from USB device... 0.194699 send_to_all: SETINFO ups.vendorid "0665" 0.194717 send_to_all: SETINFO ups.productid "5161" 0.194729 send_to_all: SETINFO device.type "ups" 0.194737 send_to_all: SETINFO driver.version "2.6.0" 0.194744 send_to_all: SETINFO driver.version.internal "0.03" 0.194752 send_to_all: SETINFO driver.name "blazer_usb" 0.194758 Trying megatec protocol... 0.195462 send: Q1 0.563527 read: (230.7 230.7 230.7 019 50.1 13.5 25.0 00001001 0.563573 send_to_all: SETINFO input.voltage "230.7" 0.563585 send_to_all: SETINFO input.voltage.fault "230.7" 0.563594 send_to_all: SETINFO output.voltage "230.7" 0.563619 send_to_all: SETINFO ups.load "19" 0.563628 send_to_all: SETINFO input.frequency "50.1" 0.563638 send_to_all: SETINFO battery.voltage "13.50" 0.563647 send_to_all: SETINFO ups.temperature "25.0" 0.563655 send_to_all: SETINFO beeper.status "enabled" 0.563663 send_to_all: SETINFO ups.type "offline / line interactive" 0.563676 send_to_all: SETINFO ups.status "OL" 0.563683 Status read in 1 tries 0.563689 Supported UPS detected with megatec protocol 0.564446 send: F 0.755438 read: #230.0 003 12.00 50.0 0.755467 send_to_all: SETINFO input.voltage.nominal "230" 0.755477 send_to_all: SETINFO input.current.nominal "3.0" 0.755488 send_to_all: SETINFO battery.voltage.nominal "12.0" 0.755497 send_to_all: SETINFO input.frequency.nominal "50" 0.755510 Ratings read in 1 tries 0.756084 send: I 1.756636 read: could not claim interface 0: Device or resource busy 1.756660 blazer_vendor: short reply 1.756668 Vendor information read 1 failed 1.757836 send: I 2.758276 read: could not claim interface 0: Device or resource busy 2.758298 blazer_vendor: short reply 2.758305 Vendor information read 2 failed 2.758964 send: I 3.760021 read: could not claim interface 0: Device or resource busy 3.760042 blazer_vendor: short reply 3.760050 Vendor information read 3 failed 3.760056 Vendor information unavailable 3.760063 Battery runtime will not be calculated (runtimecal not set) 3.760076 send_to_all: SETINFO ups.delay.start "180" 3.760085 send_to_all: SETINFO ups.delay.shutdown "30" 3.760092 send_to_all: ADDCMD beeper.toggle 3.760098 send_to_all: ADDCMD load.off 3.760104 send_to_all: ADDCMD load.on 3.760110 send_to_all: ADDCMD shutdown.return 3.760116 send_to_all: ADDCMD shutdown.stayoff 3.760123 send_to_all: ADDCMD shutdown.stop 3.760129 send_to_all: ADDCMD test.battery.start 3.760135 send_to_all: ADDCMD test.battery.start.deep 3.760142 send_to_all: ADDCMD test.battery.start.quick 3.760148 send_to_all: ADDCMD test.battery.stop 3.760938 send: Q1 4.115391 read: (230.7 231.1 230.7 019 50.1 13.5 25.0 00001001 4.115423 send_to_all: SETINFO input.voltage.fault "231.1" 4.115446 send_to_all: DATAOK 4.115503 dstate_init: sock /var/run/nut/blazer_usb-soyntec open on fd 5 4.115515 send_to_all: SETINFO driver.parameter.pollinterval "2" 4.116204 send: Q1 4.467429 read: (230.7 231.1 231.1 019 50.1 13.5 25.0 00001001 4.467466 send_to_all: SETINFO output.voltage "231.1" 5.838873 new connection on fd 6 5.838909 send_to_one: SETINFO battery.voltage "13.50" 5.838923 send_to_one: SETINFO battery.voltage.nominal "12.0" 5.838931 send_to_one: SETINFO beeper.status "enabled" 5.838939 send_to_one: SETINFO device.type "ups" 5.838947 send_to_one: SETINFO driver.name "blazer_usb" 5.838954 send_to_one: SETINFO driver.parameter.pollinterval "2" 5.838961 send_to_one: SETINFO driver.parameter.port "auto" 5.838969 send_to_one: SETINFO driver.version "2.6.0" 5.838977 send_to_one: SETINFO driver.version.internal "0.03" 5.838984 send_to_one: SETINFO input.current.nominal "3.0" 5.838992 send_to_one: SETINFO input.frequency "50.1" 5.838999 send_to_one: SETINFO input.frequency.nominal "50" 5.839006 send_to_one: SETINFO input.voltage "230.7" 5.839014 send_to_one: SETINFO input.voltage.fault "231.1" 5.839021 send_to_one: SETINFO input.voltage.nominal "230" 5.839028 send_to_one: SETINFO output.voltage "231.1" 5.839035 send_to_one: SETINFO ups.delay.shutdown "30" 5.839054 send_to_one: SETINFO ups.delay.start "180" 5.839062 send_to_one: SETINFO ups.load "19" 5.839069 send_to_one: SETINFO ups.productid "5161" 5.839076 send_to_one: SETINFO ups.status "OL" 5.839083 send_to_one: SETINFO ups.temperature "25.0" 5.839090 send_to_one: SETINFO ups.type "offline / line interactive" 5.839098 send_to_one: SETINFO ups.vendorid "0665" 5.839105 send_to_one: ADDCMD beeper.toggle 5.839112 send_to_one: ADDCMD load.off 5.839119 send_to_one: ADDCMD load.on 5.839126 send_to_one: ADDCMD shutdown.return 5.839133 send_to_one: ADDCMD shutdown.stayoff 5.839140 send_to_one: ADDCMD shutdown.stop 5.839146 send_to_one: ADDCMD test.battery.start 5.839153 send_to_one: ADDCMD test.battery.start.deep 5.839160 send_to_one: ADDCMD test.battery.start.quick 5.839169 send_to_one: ADDCMD test.battery.stop 5.839176 send_to_one: DATAOK 5.839183 send_to_one: DUMPDONE 6.117135 send: Q1 6.483450 read: (230.7 231.1 230.7 019 50.1 13.5 25.0 00001001 6.483481 send_to_all: SETINFO output.voltage "230.7" 8.119240 send: Q1 8.467467 read: (230.7 231.1 230.7 019 50.1 13.5 25.0 00001001 Broadcast Message from nut@tron (somewhere) at 13:11 ... Communications with UPS soyntec@localhost established 10.120718 send: Q1 10.483419 read: (231.1 230.7 230.7 019 50.1 13.5 25.0 00001001 10.483449 send_to_all: SETINFO input.voltage "231.1" 10.483467 send_to_all: SETINFO input.voltage.fault "230.7" ^C 11.730901 Signal 2: exiting