<br><div class="gmail_quote">2012/8/11 Massimo Gais <span dir="ltr"><<a href="mailto:simosagi9@gmail.com" target="_blank">simosagi9@gmail.com</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="im">On Fri, Aug 10, 2012 at 11:58 PM, Arnaud Quette <<a href="mailto:aquette.dev@gmail.com">aquette.dev@gmail.com</a>> wrote:<br>
><br>
> the driver runs fine. you should get a good upsc output now.<br>
> the "Comm lost" msg are part of code adjustments needed, but the code<br>
> already handle this fine, and recovers (check "entering get_answer(33)" for<br>
> example).<br>
><br>
> could you please confirm this by sending the upsc output, and starting<br>
> upsmon to monitor on the RPi?<br>
><br>
<br>
</div>Hello Arnaud,<br></blockquote><div><br>Hi Masssimo,<br> <br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
the driver seems indeed to be working fine, except the 'Lost comm'<br>
message at beginning. I started the upsc and I can get the expected<br>
output:<br>
<br>
ambient.temperature.high: 1<br>
battery.charge.low: 11<br>
battery.voltage:  13.7<br>
device.mfr: Eaton<br>
device.model: POWERWARE UPS    700i<br>
device.serial:<br>
device.type: ups<br>
<a href="http://driver.name" target="_blank">driver.name</a>: bcmxcp_usb<br>
driver.parameter.pollinterval: 2<br>
driver.parameter.port: auto<br>
driver.parameter.shutdown_delay: 60<br>
driver.version: 2.6.5<br>
driver.version.internal: 0.26<br>
input.frequency:  49.9<br>
input.frequency.high: 55<br>
input.frequency.low: 45<br>
input.frequency.nominal: 50<br>
input.transfer.boost.high: 207<br>
input.transfer.high: 275<br>
input.transfer.low: 178<br>
input.transfer.trim.low: 250<br>
input.voltage: 238<br>
input.voltage.nominal: 230<br>
output.current:   0.6<br>
output.current.nominal:   1.8<br>
output.frequency:  49.9<br>
output.phases: 1<br>
output.voltage: 238<br>
output.voltage.nominal: 230<br>
ups.beeper.status: enabled<br>
ups.firmware: Cont:00.50 Inve:01.50<br>
ups.load:  33.3<br>
ups.mfr: Eaton<br>
ups.model: POWERWARE UPS    700i<br>
ups.power.nominal: 700<br>
ups.serial:<br>
ups.status: OL<br>
ups.test.result: Done and passed<br>
<br>
Before I'm ready to keep upsmon running and execute some tests with<br>
the UPS I have to do some cleanup but the basics seems to be in place.<br></blockquote></div><br>great!<br>I'll probably bother you with some more testing, once the final code enter the subversion repos.<br><br>cheers,<br>
Arno<br><br>