<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Arial; font-size: 10pt; color: #000000'>dmesg:<br><br>Copyright (c) 1992-2010 The FreeBSD Project.<br>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br> The Regents of the University of California. All rights reserved.<br>FreeBSD is a registered trademark of The FreeBSD Foundation.<br>FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:15:35 EST 2011<br> root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64<br>Timecounter "i8254" frequency 1193182 Hz quality 0<br>CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.10-MHz K8-class CPU)<br> Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6<br> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE><br> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM><br> AMD Features=0x20100800<SYSCALL,NX,LM><br> AMD Features2=0x1<LAHF><br> TSC: P-state invariant<br>real memory = 3222274048 (3073 MB)<br>avail memory = 3088437248 (2945 MB)<br>ACPI APIC Table: <COMPAQ GLENWOOD><br>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs<br>FreeBSD/SMP: 1 package(s) x 2 core(s)<br> cpu0 (BSP): APIC ID: 0<br> cpu1 (AP): APIC ID: 1<br>ioapic0: Changing APIC ID to 1<br>ioapic0 <Version 2.0> irqs 0-23 on motherboard<br>netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling<br>wlan: mac acl policy registered<br>ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.<br>ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.<br>module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e10, 0) error 1<br>wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.<br>wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.<br>module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548d0, 0) error 1<br>ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.<br>ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.<br>module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cd0, 0) error 1<br>ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.<br>ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.<br>module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d70, 0) error 1<br>kbd1 at kbdmux0<br>cryptosoft0: <software crypto> on motherboard<br>padlock0: No ACE support.<br>acpi0: <HPQOEM SLIC-WKS> on motherboard<br>acpi0: [ITHREAD]<br>acpi0: Power Button (fixed)<br>acpi0: reservation of 0, a0000 (3) failed<br>acpi0: reservation of 100000, bff00000 (3) failed<br>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000<br>acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0<br>cpu0: <ACPI CPU> on acpi0<br>cpu1: <ACPI CPU> on acpi0<br>acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0<br>Timecounter "HPET" frequency 14318180 Hz quality 900<br>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0<br>pci0: <ACPI PCI bus> on pcib0<br>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0<br>pci1: <ACPI PCI bus> on pcib1<br>vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xe4000000-0xe4ffffff,0xc0000000-0xdfffffff,0xe2000000-0xe3ffffff irq 16 at device 0.0 on pci1<br>pci0: <multimedia, HDA> at device 27.0 (no driver attached)<br>pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0<br>pci16: <ACPI PCI bus> on pcib2<br>em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1000-0x101f mem 0xe0400000-0xe041ffff,0xe0420000-0xe043ffff irq 16 at device 0.0 on pci16<br>em0: Using an MSI interrupt<br>em0: [FILTER]<br>em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1020-0x103f mem 0xe0440000-0xe045ffff,0xe0460000-0xe047ffff irq 17 at device 0.1 on pci16<br>em1: Using an MSI interrupt<br>em1: [FILTER]<br>pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0<br>pci40: <ACPI PCI bus> on pcib3<br>pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0<br>pci63: <ACPI PCI bus> on pcib4<br>bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xe0500000-0xe050ffff irq 17 at device 0.0 on pci63<br>miibus0: <MII bus> on bge0<br>brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0<br>brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto<br>bge0: [FILTER]<br>uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3000-0x301f irq 20 at device 29.0 on pci0<br>uhci0: [ITHREAD]<br>usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0<br>uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3020-0x303f irq 18 at device 29.1 on pci0<br>uhci1: [ITHREAD]<br>usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1<br>uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 21 at device 29.2 on pci0<br>uhci2: [ITHREAD]<br>usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2<br>uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3060-0x307f irq 22 at device 29.3 on pci0<br>uhci3: [ITHREAD]<br>usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3<br>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0a04000-0xe0a043ff irq 20 at device 29.7 on pci0<br>ehci0: [ITHREAD]<br>usbus4: EHCI version 1.0<br>usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0<br>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0<br>pci5: <ACPI PCI bus> on pcib5<br>isab0: <PCI-ISA bridge> at device 31.0 on pci0<br>isa0: <ISA bus> on isab0<br>atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af irq 17 at device 31.1 on pci0<br>ata0: <ATA channel 0> on atapci0<br>ata0: [ITHREAD]<br>atapci1: <Intel ICH7 SATA300 controller> port 0x30d0-0x30d7,0x30e8-0x30eb,0x30d8-0x30df,0x30ec-0x30ef,0x30b0-0x30bf mem 0xe0a04400-0xe0a047ff irq 19 at device 31.2 on pci0<br>atapci1: [ITHREAD]<br>atapci1: AHCI called from vendor specific driver<br>atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM not supported<br>ata2: <ATA channel 0> on atapci1<br>ata2: [ITHREAD]<br>ata3: <ATA channel 1> on atapci1<br>ata3: [ITHREAD]<br>ata4: <ATA channel 2> on atapci1<br>ata4: [ITHREAD]<br>ata5: <ATA channel 3> on atapci1<br>ata5: [ITHREAD]<br>acpi_button0: <Power Button> on acpi0<br>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0<br>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0<br>atkbd0: <AT Keyboard> irq 1 on atkbdc0<br>kbd0 at atkbd0<br>atkbd0: [GIANT-LOCKED]<br>atkbd0: [ITHREAD]<br>ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0<br>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode<br>ppc0: FIFO with 16/16/13 bytes threshold<br>ppc0: [ITHREAD]<br>ppbus0: <Parallel port bus> on ppc0<br>plip0: <PLIP network interface> on ppbus0<br>plip0: [ITHREAD]<br>lpt0: <Printer> on ppbus0<br>lpt0: [ITHREAD]<br>lpt0: Interrupt-driven port<br>ppi0: <Parallel I/O> on ppbus0<br>uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0<br>uart0: [FILTER]<br>fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0<br>fdc0: [FILTER]<br>orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff on isa0<br>sc0: <System console> at flags 0x100 on isa0<br>sc0: VGA <16 virtual consoles, flags=0x300><br>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br>est0: <Enhanced SpeedStep Frequency Control> on cpu0<br>p4tcc0: <CPU Frequency Thermal Control> on cpu0<br>est1: <Enhanced SpeedStep Frequency Control> on cpu1<br>p4tcc1: <CPU Frequency Thermal Control> on cpu1<br>Timecounters tick every 1.000 msec<br>IPsec: Initialized Security Association Processing.<br>usbus0: 12Mbps Full Speed USB v1.0<br>usbus1: 12Mbps Full Speed USB v1.0<br>usbus2: 12Mbps Full Speed USB v1.0<br>usbus3: 12Mbps Full Speed USB v1.0<br>usbus4: 480Mbps High Speed USB v2.0<br>ugen0.1: <Intel> at usbus0<br>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0<br>ugen1.1: <Intel> at usbus1<br>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1<br>ugen2.1: <Intel> at usbus2<br>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2<br>ugen3.1: <Intel> at usbus3<br>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3<br>ugen4.1: <Intel> at usbus4<br>uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4<br>uhub0: 2 ports with 2 removable, self powered<br>uhub1: 2 ports with 2 removable, self powered<br>uhub2: 2 ports with 2 removable, self powered<br>uhub3: 2 ports with 2 removable, self powered<br>acd0: DVDROM <LITE-ON DVD SOHD-16P9S/FQSD> at ata0-master UDMA40 <br>ad4: 114473MB <WDC WD1200JD-00HBB0 08.02D08> at ata2-master UDMA100 SATA 1.5Gb/s<br>SMP: AP CPU #1 Launched!<br>Root mount waiting for: usbus4<br>Root mount waiting for: usbus4<br>uhub4: 8 ports with 8 removable, self powered<br>Trying to mount root from ufs:/dev/ad4s1a<br>WARNING: / was not properly dismounted<br>WARNING: R/W mount of / denied. Filesystem is not clean - run fsck<br>pflog0: promiscuous mode enabled<br>bge0: link state changed to UP<br>em0: link state changed to UP<br>ugen0.2: <American Power Conversion> at usbus0<br>uhid0: <American Power Conversion Smart-UPS C 1000 FW:UPS 02.2 / ID=1000, class 0/0, rev 2.00/1.06, addr 2> on usbus0<br><br><br><br><br>usbconfig:<br><br>ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON<br>ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON<br>ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON<br>ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON<br>ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON<br>ugen0.2: <Smart-UPS C 1000 FW:UPS 02.2 / ID=1000 American Power Conversion> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON<br><br><hr id="zwchr"><b>From: </b>"Daniel O'Connor" <doconnor@gsoft.com.au><br><b>To: </b>cmb991@comcast.net<br><b>Cc: </b>"Charles Lepple" <clepple@gmail.com>, "nut-upsuser" <nut-upsuser@lists.alioth.debian.org><br><b>Sent: </b>Thursday, September 6, 2012 8:45:10 AM<br><b>Subject: </b>Re: [Nut-upsuser] APC Smart UPS C1000<br><br><br>On 06/09/2012, at 22:06, cmb991@comcast.net wrote:<br>> Is that what you are looking for? I'm not sure what you mean by usbconfig, I don't see any logs for NUT on pfSense.<br><br>Login via SSH.<br>Run 'dmesg' and 'usbconfig' and post the results here.<br><br>> <br>> <br>> <br>> <br>> From: "Daniel O'Connor" <doconnor@gsoft.com.au><br>> To: cmb991@comcast.net<br>> Cc: "Charles Lepple" <clepple@gmail.com>, "nut-upsuser" <nut-upsuser@lists.alioth.debian.org><br>> Sent: Wednesday, September 5, 2012 6:47:40 PM<br>> Subject: Re: [Nut-upsuser] APC Smart UPS C1000<br>> <br>> <br>> On 05/09/2012, at 23:58, cmb991@comcast.net wrote:<br>> > 1. Does it show up in dmesg, or when you run usbconfig? (pfsense is based on FreeBSD right?)<br>> > <br>> > 2. What version of NUT do you have installed?<br>> > <br>> > Running 'upsc -h' should show the version, eg..<br>> > [midget 10:55] ~ >upsc -h <br>> > Network UPS Tools upsc 2.6.4-Unversioned directory<br>> > <br>> > usage: upsc -l | -L [<hostname>[:port]]<br>> > <snip><br>> > <br>> > <br>> > My Response Was:<br>> > 1. The only thing that shows up is when I enable it, it sends a broadcasted message saying that it can't find the UPS.<br>> > 2. On pfSense, the versions of the packages are listed. This is the version on mine. Version 2.2.2_5 pkg 1.4.<br>> > [2.0.1-RELEASE][admin@host.domain.org]/root(2): upsc -h<br>> > Network UPS Tools upsc 2.2.2<br>> > <br>> > Where do you see the other two questions? And which one of these did I not answer right?<br>> <br>> I asked if pfSense was FreeBSD based, you said OpenBSD but it's really based on FreeBSD (and it makes a difference especially for USB related matters).<br>> <br>> Can you paste the output of dmesg and usbconfig with the UPS connected please?<br>> <br>> --<br>> Daniel O'Connor software and network engineer<br>> for Genesis Software - http://www.gsoft.com.au<br>> "The nice thing about standards is that there<br>> are so many of them to choose from."<br>> -- Andrew Tanenbaum<br>> GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C<br><br>--<br>Daniel O'Connor software and network engineer<br>for Genesis Software - http://www.gsoft.com.au<br>"The nice thing about standards is that there<br>are so many of them to choose from."<br> -- Andrew Tanenbaum<br>GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C<br><br><br><br><br><br><br></div></body></html>