<p dir="ltr">You will need at least 2.6.4 for this unit, but it's really blazer_usb.</p>
<p dir="ltr">Cheers,<br>
Arnaud<br>
(sent from my S3... please excuse my brevity)</p>
<div class="gmail_quote">Le 23 nov. 2012 09:40, "Walter O. Dari" <<a href="mailto:wlinuxw@gmail.com" target="_blank">wlinuxw@gmail.com</a>> a écrit :<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Results:<br>
<br>
wodari@svrsw2:/usr/local/<u></u>MonitorSoftware$ lsusb<br>
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd<br>
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br>
<br>
<br>
1<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
ups.conf<br>
<br>
[maxim]<br>
driver = blazer_usb<br>
port = auto<br>
desc = "SW servers"<br>
<br>
<br>
wodari@svrsw2:~$ /sbin/upsdrvctl start<br>
Network UPS Tools - UPS driver controller 2.4.3<br>
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)<br>
No supported devices found. Please check your device availability with 'lsusb'<br>
and make sure you have an up-to-date version of NUT. If this does not help,<br>
try running the driver with at least 'subdriver', 'vendorid' and 'productid'<br>
options specified. Please refer to the man page for details about these options<br>
(man 8 blazer).<br>
<br>
Driver failed to start (exit status=1)<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
<br>
2<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
ups.conf<br>
<br>
[maxim]<br>
driver = megatec_usb<br>
port = auto<br>
desc = "SW servers"<br>
<br>
<br>
wodari@svrsw2:~$ /sbin/upsdrvctl start<br>
Network UPS Tools - UPS driver controller 2.4.3<br>
Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)<br>
Serial-over-USB transport layer 0.10<br>
No supported devices found. Please check your device availability with 'lsusb'<br>
and make sure you have an up-to-date version of NUT. If this does not help,<br>
try running the driver with at least 'vendorid' and 'subdriver' options<br>
specified. Please refer to the man page for details about these options<br>
(man 8 megatec_usb).<br>
Please report your results to the NUT user's mailing list<br>
<<a href="mailto:nut-upsuser@lists.alioth.debian.org" target="_blank">nut-upsuser@lists.alioth.<u></u>debian.org</a>>.<br>
<br>
Driver failed to start (exit status=1)<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
<br>
3<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
ups.conf<br>
<br>
[maxim]<br>
driver = bcmxcp_usb<br>
port = auto<br>
desc = "SW servers"<br>
<br>
<br>
wodari@svrsw2:~$ /sbin/upsdrvctl start<br>
Network UPS Tools - UPS driver controller 2.4.3<br>
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)<br>
USB communication subdriver 0.18<br>
Can't open POWERWARE USB device, retrying ...<br>
Can't open POWERWARE USB device, retrying ...<br>
Can't open POWERWARE USB device, retrying ...<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
<br>
4<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
ups.conf<br>
<br>
[maxim]<br>
driver = tripplite_usb<br>
port = auto<br>
desc = "SW servers"<br>
<br>
<br>
wodari@svrsw2:~$ /sbin/upsdrvctl start<br>
Network UPS Tools - UPS driver controller 2.4.3<br>
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)<br>
Warning: This is an experimental driver.<br>
Some features may not function correctly.<br>
<br>
No matching USB/HID UPS found<br>
Driver failed to start (exit status=1)<br>
------------------------------<u></u>------------------------------<u></u>------------<br>
<br>
<br>
More info...<br>
<br>
I'm use Debian Squeeze<br>
<br>
wodari@svrsw2:~$ uname -a<br>
Linux svrsw2 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux<br>
<br>
wodari@svrsw2:~$ upsrw maxim<br>
Can't connect: Connection failure: Connection refused<br>
<br>
wodari@svrsw2:~$ upscmd -l maxim<br>
Error: Connection failure: Connection refused<br>
<br>
<br>
<br>
Walter<br>
<br>
<br>
<br>
<br>
El 23/11/12 04:18, Arnaud Quette escribió:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
HolÃ<br>
<br>
Try blazer_usb. Please report back if everything is working as per<br>
<a href="http://www.networkupstools.org/stable-hcl.html#footnotes" target="_blank">http://www.networkupstools.<u></u>org/stable-hcl.html#footnotes</a><br>
<br>
Cheers<br>
Arnaud<br>
(sent from my S3... please excuse my brevity)<br>
<br>
Le 21 nov. 2012 23:13, "Walter O. Dari" <<a href="mailto:wlinuxw@gmail.com" target="_blank">wlinuxw@gmail.com</a><br>
<mailto:<a href="mailto:wlinuxw@gmail.com" target="_blank">wlinuxw@gmail.com</a>>> a écrit :<br>
<br>
Hello:<br>
<br>
I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.<br>
Connects to the PC by a USB 2.0 port.<br>
I wanted to use nut, but this brand is not on the list of nut drivers.<br>
<br>
lsusb returns:<br>
<br>
...<br>
Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd<br>
...<br>
<br>
I did not find this manufacturer in the driver list.<br>
<br>
Anyone know if you can have compatibility with other make and model<br>
of UPS.<br>
<br>
With what driver it could start testing?<br>
<br>
Greetings and thanks,<br>
Walter<br>
<br>
(original Spanish text translated by Google)<br>
</blockquote>
</blockquote></div>