<div dir="ltr"><div>I have a brand new Eaton 5E UPS purchased in Australia.</div><div><br></div><div>Details:</div><div>Eaton 5E</div><div>Model: 5E650iUSB-AU</div><div>Date: best I can find is the shipping date to supplier on box label - May 2014</div>

<div><br></div><div>OS:</div><div>Ubuntu 14.04 Server edition</div><div>Nut 2.7.1</div><div>Installed via apt-get install nut</div><div><br></div><div>I have two problems I would like to fix.</div><div><br></div><div>First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can mute the beeper temporarily (and this works) but that most UPSs do not allow you to permanently turn it off (I tried using upsrw but it said beeper.status was read only).</div>

<div><br></div><div>So is there a way to auto-mute the beeper? e.g on system boot or on power failure?</div><div><br></div><div>Next I did some testing and I think I have a power race (is that the right term?). Basically if I switch off the AC, wait for battery to drain and the system to shutdown and turn off (the PC only so far). If I then turn the AC back on before the ~20 sec delay before the UPS turns off and on again the computer never boots automatically (I have set BIOS to power on after AC back).</div>

<div><br></div><div>If I let the UPS turn off before I turn AC back on the computer will boot automatically.</div><div><br></div><div>I think the problem is that either the UPS is now power cycling the load when AC is on and it reboots, or it is not turning it off for long enough for the PSU/computer to register this as a AC off and on event. When the UPS reboots it beeps and I can hear a relay click so it must do something when it reboots with power on.</div>

<div><br></div><div>How can I add a delay between UPS power off, and power on?</div><div><br></div><div>Here is output of upsc in case it helps:</div><div><div>leith@server:~$ upsc eaton</div><div>Init SSL without certificate database</div>

<div>battery.charge: 35</div><div>battery.runtime: 1076</div><div>battery.type: PbAc</div><div>device.mfr: EATON</div><div>device.model: 5E 650i</div><div>device.type: ups</div><div><a href="http://driver.name">driver.name</a>: usbhid-ups</div>

<div>driver.parameter.pollfreq: 30</div><div>driver.parameter.pollinterval: 2</div><div>driver.parameter.port: auto</div><div>driver.version: 2.7.1</div><div>driver.version.data: MGE HID 1.32</div><div>driver.version.internal: 0.38</div>

<div>input.voltage: 247.0</div><div>outlet.1.status: on</div><div>outlet.desc: Main Outlet</div><div><a href="http://outlet.id">outlet.id</a>: 1</div><div>outlet.switchable: no</div><div>output.frequency: 50.0</div><div>
output.frequency.nominal: 50</div>
<div>output.voltage: 246.0</div><div>output.voltage.nominal: 230</div><div>ups.beeper.status: disabled</div><div>ups.delay.shutdown: 20</div><div>ups.firmware: 01.04.0016</div><div>ups.load: 11</div><div>ups.mfr: EATON</div>

<div>ups.model: 5E 650i</div><div>ups.power.nominal: 650</div><div>ups.productid: ffff</div><div>ups.start.battery: yes</div><div>ups.status: OL CHRG</div><div>ups.timer.shutdown: -1</div><div>ups.vendorid: 0463</div></div>

<div><br></div><div>Thanks,<br>Leith Bade<br><a href="mailto:leith@leithalweapon.geek.nz">leith@leithalweapon.geek.nz</a><br></div>
</div>