<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi all,<br>
<br>
I've finally gotten around to setting up the netbook that controls
my UPS and I would like to make sure that I've got the metacode
correct before configuring nut :)<br>
<br>
Here's what I've got:<br>
Belkin UPS F6C120auUNV<br>
<ul>
<li>Batteries recently replaced</li>
<li>On battery: 24 port switch, PoE AP, antenna power booster,
ADSL modem, MythTV server, 19" monitor</li>
<li>
On surge protection: Netbook (details below)</li>
<li>I would like the UPS to turn off at 20% battery capacity</li>
</ul>
Netbook with Debian 7.7.0, <br>
<ul>
<li>Attached via USB to Belkin UPS</li>
<li>Battery in netbook lasts three hours, it will outlast the UPS
by a fair way, so does not need UPS battery supply</li>
<li>‘master’ where upsd runs</li>
<li>runs upsc, upsd, upsmon, upsc, nut-cgi, apache, nagios<br>
</li>
</ul>
MythTV server with Ubuntu 14.04<br>
<ul>
<li>plugged into Belkin UPS</li>
<li>to be turned off within 5 minutes of loss of supply</li>
<li>to be turned back on after 15 minutes of return of supply
(WOL?)<br>
</li>
<li>2xSSD drives, 1x4Tb 3.5”, 1x250Gb 2.5”</li>
<li>‘slave’ system</li>
</ul>
I'm digging through the nut documentation now, I'm sure that I can
configure nut to do all of this... right?<br>
<br>
Thanks,<br>
Greg<br>
<br>
</body>
</html>