<div>I am not an expert on this matter but I can tell you I am having issues with Freebsd 10.2 with a Tripp Lite ups myself <br/>
<br/>
Hopefully a dev can look in to FreeBSD 10.2<br/>
<br/>
<font color="#888888"><font color="#888888">Sent from my LG G3.</font></font><br/><br/>-----Original Message-----<br/>From: Mario Lobo <mlobo@digiart.art.br><br/>To: nut-upsuser@lists.alioth.debian.org<br/>Sent: Thu, 20 Aug 2015 3:50 PM<br/>Subject: [Nut-upsuser] APC BACK UPS 2200 model BZ2200BI-BR<br/><br/></div>Hi;
<br/>
<br/>
I'm having some trouble to comunicate with my just bought (08/17/15)
<br/>
Ups. According to SOLIS(8):
<br/>
<br/>
SUPPORTED HARDWARE
<br/>
<br/>
This driver has been tested with :
<br/>
<br/>
Solis 1000 VA
<br/>
Solis 1500 VA
<br/>
Solis 2000 VA
<br/>
Solis 3000 VA
<br/>
Back-UPS BZ1200-BR
<br/>
Back-UPS BZ2200BI-BR
<br/>
<br/>
So solis is the one to go for.
<br/>
<br/>
<br/>
Here is my scenario:
<br/>
<br/>
SW: nut-2.7.3 (compiled from ports)
<br/>
OS: FreeBSD 10.2-STABLE #2 r286923
<br/>
UPS: APC BACK UPS 2200 model BZ2200BI-BR (usb interface)
<br/>
using a printer-like usb cable (bundled)
<br/>
<br/>
When I plug it in, here is what comes up:
<br/>
<br/>
ugen1.2: <APC BY SCHNEIDER ELECTRIC> at usbus1
<br/>
umodem0: <APC BY SCHNEIDER ELECTRIC APC USB SERIAL CONVERTER.,
<br/>
class 2/0, rev 2.00/1.00, addr 2> on usbus1
<br/>
umodem0: data interface 1, has no CM over data, has no break
<br/>
<br/>
<br/>
[>]usbconfig list
<br/>
<br/>
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL
<br/>
(12Mbps) pwr=SAVE (0mA)
<br/>
<br/>
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0
<br/>
md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
<br/>
<br/>
ugen2.1: <EHCI root HUB Intel>at usbus2, cfg=0 md=HOST spd=HIGH
<br/>
(480Mbps) pwr=SAVE (0mA)
<br/>
<br/>
ugen1.2:<APC USB SERIAL CONVERTER. APC BY SCHNEIDER ELECTRIC> at
<br/>
usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
<br/>
<br/>
<br/>
And here are the devices I get after pluging it in:
<br/>
<br/>
ttyU0
<br/>
<a href="http://ttyU0.init">ttyU0.init</a>
<br/>
<a href="http://ttyU0.lock">ttyU0.lock</a>
<br/>
<br/>
cuaU0
<br/>
<a href="http://cuaU0.init">cuaU0.init</a>
<br/>
<a href="http://cuaU0.lock">cuaU0.lock</a>
<br/>
<br/>
ugen1.2 (ugen1.2 -> usb/1.2.0)
<br/>
<br/>
(no umodem0 device shows)
<br/>
<br/>
<br/>
** <a href="http://ups.conf">ups.conf</a>
<br/>
<br/>
[lobos]
<br/>
driver = solis
<br/>
port = /dev/ttyU0 (or cuaU0, or ugen1.2)
<br/>
<br/>
<br/>
*** RESULTS
<br/>
<br/>
** ugen1.2
<br/>
<br/>
[>]/usr/local/libexec/nut/solis -D -a lobos -u root
<br/>
Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3)
<br/>
<a href="tel:0000000">0.000000</a> debug level is '1'
<br/>
<a href="tel:0001551">0.001551</a> tcgetattr(/dev/ugen1.2): Inappropriate ioctl for device
<br/>
<br/>
** ttyU0
<br/>
<br/>
[>]/usr/local/libexec/nut/solis -D -a lobos -u root
<br/>
Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3)
<br/>
<a href="tel:0000000">0.000000</a> debug level is '1'
<br/>
21.249301 Solis not detected! aborting ...
<br/>
<br/>
** cuaU0
<br/>
<br/>
[>]/usr/local/libexec/nut/solis -D -a lobos -u root
<br/>
Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3)
<br/>
<a href="tel:0000000">0.000000</a> debug level is '1'
<br/>
21.065536 Solis not detected! aborting ...
<br/>
<br/>
<br/>
using 'upsdrvctl -t -u root start lobos' yields the same results.
<br/>
<br/>
<br/>
On windows it works with the software that I downloaded for it
<br/>
but the server is FreeBSD. Windows is just the desktop I use for
<br/>
occasional audio production.
<br/>
<br/>
<br/>
Would anyone have any pointers of what else I can try to make this
<br/>
work?
<br/>
<br/>
Thanks for any suggestions.
<br/>
<br/>
--
<br/>
Mario Lobo
<br/>
<a href="http://www.mallavoodoo.com.br">http://www.mallavoodoo.com.br</a>
<br/>
FreeBSD since 2.2.8 [not Pro-Audio.... YET!!]
<br/>
<br/>
"UNIX was not designed to stop you from doing stupid things,
<br/>
because that would also stop you from doing clever things."
<br/>
<br/>
_______________________________________________
<br/>
Nut-upsuser mailing list
<br/>
<a href="mailto:Nut-upsuser@lists.alioth.debian.org">Nut-upsuser@lists.alioth.debian.org</a>
<br/>
<a href="http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser">http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser</a>
<br/>