<div dir="ltr"><div><div><div><div><div><div><div><div>All,<br><br></div>I recently connected my UPS to my NAS. The NAS detected the UPS, and I checked the "Enable network UPS server" option and added relevant IPs to the "Permitted DiskStation devices" option. The NAS is running DSM 5.2-5592 Update 4, with a NUT version of SDS5-2-2015Q1branch-5579-15061. I then attempted to connect my desktop via SNMP. My desktop is running Arch Linux, with a NUT version of 2.7.3. I seem to be able to connect to the NAS, but snmp-ups errors out with the following message:<br><br>No matching MIB found for sysOID '.1.3.6.1.4.1.8072.3.2.10'!<br>Please report it to NUT developers, with an 'upsc' output for your device.<br>Going back to the classic MIB detection method.<br>No supported device detected<br><br></div></div>Here is the output of upsc on the NAS:<br><br>battery.charge: 100<br>battery.charge.low: 10<br>battery.charge.warning: 50<br>battery.date: not set<br>battery.mfr.date: 2004/11/16<br>battery.runtime: 1170<br>battery.runtime.low: 120<br>battery.type: PbAc<br>battery.voltage: 13.4<br>battery.voltage.nominal: 12.0<br>device.mfr: APC<br>device.model: Back-UPS ES 650<br>device.serial: QB0447141575  <br>device.type: ups<br><a href="http://driver.name">driver.name</a>: usbhid-ups<br>driver.parameter.pollfreq: 30<br>driver.parameter.pollinterval: 5<br>driver.parameter.port: auto<br>driver.version: SDS5-2-2015Q1branch-5579-150611<br>driver.version.data: APC HID 0.95<br>driver.version.internal: 0.38<br>input.sensitivity: high<br>input.transfer.high: 138<br>input.transfer.low: 88<br>input.voltage: 118.0<br>input.voltage.nominal: 120<br>ups.beeper.status: enabled<br>ups.delay.shutdown: 20<br>ups.firmware: 818.w1.D<br>ups.firmware.aux: w1<br>ups.load: 8<br>ups.mfr: APC<br>ups.mfr.date: 2004/11/16<br>ups.model: Back-UPS ES 650<br>ups.productid: 0002<br>ups.serial: QB0447141575  <br>ups.status: OL<br>ups.timer.reboot: 0<br>ups.timer.shutdown: -1<br>ups.vendorid: 051d<br><br></div>I've even extracted the contents of the attached zip file (from Synology's web site) into /usr/share/snmp/mibs/.<br><br></div>Using the exact same configuration options, I can successfully connect from Windows XP using WinNUT 2.0.0.4.<br><br></div>Any ideas?<br><br></div>Thanks,<br></div>Dan<br></div>