<HTML><BODY>I'm trying to use NUT with PowerCom RPT-1000AP on CentOS 6/7<br><br>ups.conf:<br>[RPT-1000]<br> driver = "usbhid-ups"<br> port = "auto"<br> vendorid = "0D9F"<br> productid = "0004"<br> product = "HID UPS Battery"<br> serial = "004-0D9F-000"<br> vendor = "POWERCOM Co.,LTD"<br> bus = "002"<br> pollfreq = 10<br> offdelay = 120<br> ondelay = 180<br><br>Monitoring works fine, but:<br>upscmd -u UPSUSER -p UPSPASSWD -a RPT-1000AP shutdown.return<br>says "OK" and does nothing.<br><br>Meanwhile apcusd is able to poweroff this UPS correctly.<br>USB dump by apctest "Test kill UPS power" command:<br>CTRL_IN(0.0): 00:00:0000:0000:1030303030 # 2.5421979427337646<br>CTRL_OUT(0.0):21:09:0310:0000:1040000000 # 0.0000979900360107<br>CTRL_IN(0.0): 00:00:0000:0000:1030303030 # 0.0175840854644775<br>CTRL_IN(0.0): 00:00:0000:0000:0f00 # 0.0109839439392090<br>CTRL_OUT(0.0):21:09:030f:0000:0f3c00 # 0.0000259876251221<br>CTRL_IN(0.0): 00:00:0000:0000:0f08 # 0.0591070652008057<br>INTR_IN(0.1): 0a0c20 # 3.8889238834381104<br>INTR_IN(0.1): 0e64 # 0.1909830570220947<br>INTR_IN(0.1): 1401 # 0.1928460597991943<br><--a lot of same messages--><br>INTR_IN(0.1): 0a0d00 # 8.3736109733581543<br>INTR_IN(0.1): 0e52 # 0.1944248676300049<br>INTR_IN(0.1): 1401 # 0.1950931549072266<br>INTR_IN(0.1): 379002 # 0.1951398849487305<br><-- UPS powered OFF here--><br><br>With the best regards!</BODY></HTML>