<div dir="ltr">Hi Charles,<div><br></div><div>Have managed to make some progress after a fashion. Got the unit to work on the jessie version of NUT (2.7.2). upsc does output the unit parameters, along with the mis-scaled voltage readings described at <a href="http://networkupstools.org/ddl/Mini-Box.com/OpenUPS2.html">http://networkupstools.org/ddl/Mini-Box.com/OpenUPS2.html</a>. Am now trying to get the shutdown sequence to work properly. </div><div><br></div><div>Have been following this: <a href="http://networkupstools.org/docs/user-manual.chunked/ar01s06.html">http://networkupstools.org/docs/user-manual.chunked/ar01s06.html</a></div><div>Unit performs as described in the "Testing shutdowns" section.</div><div><br></div><div>I have another question that I am hoping to get some clarification with.</div><div><br></div><div>The ups unit does not transit into OB LB even when Battery Charge falls below the LB level. The unit does initiate power off properly when Battery Charge/Runtime reaches 0. </div><div>Is this correct? Or should there be an earlier transition and shutdown triggered by OB LB? <br></div><div><br></div><div>I have also not been able to successfully get NOTIFYMSG or NOTIFYFLAG to work successfully although I suspect that has to do with my configuration of NOTIFYCMD. Will pursue that a little more. </div><div><br></div><div>Cheers</div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On 4 August 2017 at 20:09, Song Teck <span dir="ltr"><<a href="mailto:songteck@gmail.com" target="_blank">songteck@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi Charles, Tim, <div><br></div><div>Ah, thanks for bit about the dependencies. Would have thought them to be version specific. </div><div><br></div><div>Tried with the client and server debs but it seems too many dependency differences between wheezy and jessie. I also tried upgrading from wheezy to jessie wholesale to see if that worked and it did solve nut but in the process broke something else that's more critical so I'll give the following another try:</div><div><br></div><div>1) try Tim's suggestion of searching for the "new" upsdrvctl or failing that, </div><div>2) uninstalling 2.6.5 and then installing 2.7.4 via tar</div><div><br></div><div>Cheers</div></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On 3 August 2017 at 19:21, Charles Lepple <span dir="ltr"><<a href="mailto:clepple@gmail.com" target="_blank">clepple@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span>On Aug 3, 2017, at 5:35 AM, Song Teck <<a href="mailto:songteck@gmail.com" target="_blank">songteck@gmail.com</a>> wrote:<br>
><br>
> That package is supposed to install both server and client (according to the description at <a href="https://packages.debian.org/stretch/nut" rel="noreferrer" target="_blank">https://packages.debian.org/st<wbr>retch/nut</a> anyway). I'll try both server and client individually later and see if that helps.<br>
><br>
</span>Right, but only if you install it via apt. If you install the 2.7.4 .deb with dpkg, and you have the 2.6.4 nut-client and nut-server .debs installed, the dependencies are satisfied. (The nut metapackage does not depend on specific versions.)</blockquote></div><br></div>
</div></div></blockquote></div><br></div>