<div dir="ltr">Hi,<div><br></div><div>I'm trying to get NUT-Installer-2.6.5-6.msi working on my homelab Hyper-V Server 2016, so this is Hyper-V variant that is free ... without a desktop experience.</div><div>I got it installed perfectly, but it seems to display any information from my APC UPS connected to my Synology NAS.</div><div><br></div><div>etc\nut.conf<br></div><div>MODE=netclient<br></div><div><br></div><div>etc\upsmon.conf</div><div>MONITOR <a href="mailto:ups@192.168.1.10">ups@192.168.1.10</a> 1 upsmon secret slave<br></div><div><br></div><div>When I run bin\upsc <a href="mailto:ups@192.168.1.10">ups@192.168.1.10</a> it gives no error message .. just a blank line.</div><div><br></div><div><div>I tested the client as well on my Windows 10 client, there it works with the same config.</div></div><div>And upsc.exe gives all the amount of info you need.</div><div><br></div><div>I also got it running on another Synology and had it running on a linux client earlier.</div><div><br></div><div>Haven't found a way to get logging going,<br></div><div><div>Any that could help me further?</div></div><div><br></div><div>Thanks in advance,</div><div>Mathé</div></div>