<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.18.0">
</HEAD>
<BODY>
Hello Jordi,<BR>
<BR>
Blast. That worked!<BR>
<BR>
Note: the information needed to build alsa is out of date in the README.Debian.<BR>
<BR>
what I did:<BR>
<BR>
sudo aptitude install module-assistant alsa-source<BR>
sudo m-a prepare<BR>
sudo m-a build alsa<BR>
sudo m-a install alsa<BR>
<BR>
sudo alsaconf<BR>
<BR>
(but this didn't get debian sound system working so then I rebooted).<BR>
<BR>
Ferry<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<BR>
</TD>
</TR>
</TABLE>
<BR>
Op maandag 31-03-2008 om 01:50 uur [tijdzone +0200], schreef Jordi Mallach:
<BLOCKQUOTE TYPE=CITE>
<PRE>
<FONT COLOR="#000000">On Sun, Mar 30, 2008 at 10:33:06PM +0200, Ferry Toth wrote:</FONT>
<FONT COLOR="#000000">> After just upgrading linux-image-686 from 2.6.22 to 2.6.24+13 my Meastro3 does not work anymore.</FONT>
<FONT COLOR="#000000">> The version of alsa-base has not changed (remains 1.016-1) however syslog shows:</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> Maestro3: probe of 0000:02:01.0 failed with error -2</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> The lines preceeding this one are:</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKC] - GSI 7 (level, low) -> IRQ 7</FONT>
<FONT COLOR="#000000">> ACPI: PCI interrupt for device 0000:02:01.0 disabled.</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> cat /proc/asound/version</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> gives</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> Advanced Linux Sound architecture driver Version 1.0.15</FONT>
<FONT COLOR="#000000">Can you try building alsa-modules 1.0.16? For this, you'll need</FONT>
<FONT COLOR="#000000">alsa-source and module-assistant, as described in alsa-source's</FONT>
<FONT COLOR="#000000">README.Debian document.</FONT>
<FONT COLOR="#000000">Thanks.</FONT>
</PRE>
</BLOCKQUOTE>
</BODY>
</HTML>