[pkg-fso-maint] Kernel troubles
gregor herrmann
gregoa at debian.org
Tue Feb 24 15:21:12 UTC 2009
On Tue, 24 Feb 2009 00:49:54 +0100, Luca Capello wrote:
> > * install the linux-image-2.6.28-openmoko-gta02 package
> > * change the /boot/uImage.bin symlink to point to
> > vmlinuz-2.6.28-20090105.git69b2aa26
> The above should be enough.
Thanks for the confirmation.
What I've found out so far is:
* I get a kernel oops as described in
http://lists.linuxtogo.org/pipermail/smartphones-userland/2009-February/001155.html
(dmesg output attached).
* The oops happens "late", i.e. the applications from .xsession are
already started; at the screen I have around this time the
"Requesting resource: ..." messages.
* As you assumed in your reply to Christian, it seems to be wifi
related; if I keep wicd from starting at runlevel 2 all is fine
(except that I can't start it later because I have no eth0).
> Another thing you can do to track the bugs
> is to check if the bus is present in the FSO-MS5 kernel as well,
> something like the following (not tested):
Thanks for the detailed (and perfectly working instructions, I just
had to run `depmod 2.6.28-rc4' after booting into the kernel).
Result: I get the same oops (cf. dmesg.om.txt, which has no diff
output against dmesg.txt).
Cheers,
gregor
--
.''`. Home: http://info.comodo.priv.at/{,blog/} / GPG Key ID: 0x00F3CFE4
: :' : Debian GNU/Linux user, admin, & developer - http://www.debian.org/
`. `' Member of VIBE!AT, SPI Inc., fellow of FSFE | http://got.to/quote/
`- NP: Queen: Innuendo
-------------- next part --------------
[ 0.000000] Linux version 2.6.28-20090105.git69b2aa26 (gismo at agricola) (gcc version 4.3.3 (Debian 4.3.3-3) ) #1 PREEMPT Tue Feb 10 07:05:05 UTC 2009
[ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: GTA02
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03e6e54, node_mem_map c0913000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] CPU S3C2442B (id 0x32440aab)
[ 0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
[ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
[ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] irq: clearing pending ext status 000a12f0
[ 0.000000] irq: clearing pending ext status 000802f0
[ 0.000000] irq: clearing subpending status 00000082
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
[21474536.485000] Console: colour dummy device 80x30
[21474536.485000] console [tty0] enabled
[21474536.490000] console [ttySAC2] enabled
[21474536.495000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[21474536.500000] ... MAX_LOCKDEP_SUBCLASSES: 8
[21474536.505000] ... MAX_LOCK_DEPTH: 48
[21474536.510000] ... MAX_LOCKDEP_KEYS: 8191
[21474536.515000] ... CLASSHASH_SIZE: 4096
[21474536.520000] ... MAX_LOCKDEP_ENTRIES: 8192
[21474536.525000] ... MAX_LOCKDEP_CHAINS: 16384
[21474536.530000] ... CHAINHASH_SIZE: 8192
[21474536.535000] memory used by lock dependency info: 2527 kB
[21474536.540000] per task-struct memory footprint: 2304 bytes
[21474536.545000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[21474536.555000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[21474536.580000] Memory: 128MB = 128MB total
[21474536.580000] Memory: 120504KB available (3608K code, 5484K data, 156K init)
[21474536.590000] Calibrating delay loop... 198.65 BogoMIPS (lpj=496640)
[21474536.690000] Mount-cache hash table entries: 512
[21474536.695000] CPU: Testing write buffer coherency: ok
[21474536.710000] net_namespace: 816 bytes
[21474536.725000] regulator: core version 0.5
[21474536.725000] NET: Registered protocol family 16
[21474536.780000] S3C Power Management, Copyright 2004 Simtec Electronics
[21474536.780000] modem wakeup interrupt
[21474536.785000] wake enabled for irq 17
[21474536.790000] ar6000_wow interrupt
[21474536.790000] wake enabled for irq 49
[21474536.815000] S3C2442: Initialising architecture
[21474536.815000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[21474536.820000] DMA channel 0 at c8808000, irq 33
[21474536.825000] DMA channel 1 at c8808040, irq 34
[21474536.830000] DMA channel 2 at c8808080, irq 35
[21474536.835000] DMA channel 3 at c88080c0, irq 36
[21474536.840000] S3C244X: Clock Support, DVS off
[21474537.005000] usbcore: registered new interface driver usbfs
[21474537.010000] usbcore: registered new interface driver hub
[21474537.015000] usbcore: registered new device driver usb
[21474537.075000] NET: Registered protocol family 2
[21474537.130000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[21474537.140000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[21474537.140000] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[21474537.145000] TCP: Hash tables configured (established 4096 bind 4096)
[21474537.150000] TCP reno registered
[21474537.170000] NET: Registered protocol family 1
[21474537.175000] s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered
[21474537.180000] Enabling FIQ using irq 29
[21474537.180000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
[21474537.195000] gta02-pm-wlan gta02-pm-wlan.0: starting
[21474537.270000] ar6000_wow interrupt
[21474537.420000] ashmem: initialized
[21474537.425000] JFFS2 version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc.
[21474537.430000] msgmni has been set to 235
[21474537.445000] alg: No test for stdrng (krng)
[21474537.445000] alg: No test for stdrng (ansi_cprng)
[21474537.450000] io scheduler noop registered
[21474537.450000] io scheduler deadline registered (default)
[21474537.510000] ##### init_resume_dependency_list(head=c03d7cac)
[21474537.515000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
[21474537.525000] ##### init_resume_dependency_list(head=c03d7d88)
[21474537.525000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
[21474537.530000] ##### init_resume_dependency_list(head=c03d7e64)
[21474537.535000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
[21474537.615000] brd: module loaded
[21474537.615000] neo1973-version neo1973-version.0: starting
[21474537.645000] physmap platform flash device: 00200000 at 18000000
[21474537.645000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[21474537.650000] Intel/Sharp Extended Query Table at 0x0039
[21474537.655000] Intel/Sharp Extended Query Table at 0x0039
[21474537.660000] Intel/Sharp Extended Query Table at 0x0039
[21474537.665000] Intel/Sharp Extended Query Table at 0x0039
[21474537.670000] Intel/Sharp Extended Query Table at 0x0039
[21474537.675000] cfi_cmdset_0001: Erase suspend on write enabled
[21474537.680000] erase region 0: offset=0x0,size=0x2000,blocks=8
[21474537.685000] erase region 1: offset=0x10000,size=0x10000,blocks=31
[21474537.690000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
[21474537.700000] RedBoot partition parsing not available
[21474537.715000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
[21474537.715000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
[21474537.720000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
[21474537.725000] Bad block table found at page 131008, version 0x01
[21474537.730000] Bad block table found at page 130944, version 0x01
[21474537.735000] nand_read_bbt: Bad block at 0x01a00000
[21474537.740000] 6 cmdlinepart partitions found on MTD device neo1973-nand
[21474537.745000] Creating 6 MTD partitions on "neo1973-nand":
[21474537.750000] 0x00000000-0x00040000 : "u-boot"
[21474537.765000] 0x00040000-0x00080000 : "u-boot_env"
[21474537.775000] 0x00080000-0x00880000 : "kernel"
[21474537.785000] 0x00880000-0x00920000 : "splash"
[21474537.790000] 0x00920000-0x00960000 : "factory"
[21474537.800000] 0x00960000-0x10000000 : "rootfs"
[21474537.825000] usbcore: registered new interface driver libusual
[21474537.840000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
[21474537.840000] gta02_udc_command S3C2410_UDC_P_DISABLE
[21474537.850000] mice: PS/2 mouse device common for all mice
[21474537.865000] i2c /dev entries driver
[21474537.875000] s3c2440-i2c s3c2440-i2c: slave address 0x10
[21474537.875000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
[21474537.905000] pcf50633 0-0073: Probed device version 19 variant 132
[21474537.955000] input: GTA02 PMU events as /class/input/input0
[21474538.000000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633 as rtc0
[21474538.035000] wake enabled for irq 53
[21474538.040000] s3c2440-ts s3c2440-ts: Starting
[21474538.040000] Created group ts filter len 12 depth 2 close 10 thresh 6
[21474538.045000] Created Median ts filter len 20 depth 2 dec 24
[21474538.050000] Created Mean ts filter len 4 depth 2 thresh 65535
[21474538.055000] Created Linear ts filter depth 2
[21474538.060000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized
[21474538.065000] s3c2440-ts s3c2440-ts: successfully loaded
[21474538.075000] input: s3c2410 TouchScreen as /class/input/input1
[21474538.085000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x40 INT5=0x00
[21474538.100000] neo1973-pm-host neo1973-pm-host.0: starting
[21474538.105000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474538.110000] input: lis302-1 (top) as /class/input/input2
[21474538.130000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474538.140000] lis302dl lis302dl.1: device BOOT reload failed
[21474538.145000] lis302dl lis302dl.1: Found lis302-1 (top)
[21474538.155000] input: lis302-2 (bottom) as /class/input/input3
[21474538.180000] lis302dl lis302dl.2: device BOOT reload failed
[21474538.185000] lis302dl lis302dl.2: Found lis302-2 (bottom)
[21474538.195000] input: Neo1973 Buttons as /class/input/input4
[21474538.225000] wake enabled for irq 48
[21474538.230000] neo1973-resume neo1973-resume.0: starting
[21474538.235000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
[21474538.255000] APM Battery Driver
[21474538.260000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
[21474538.305000] cpuidle: using governor ladder
[21474538.305000] sdhci: Secure Digital Host Controller Interface driver
[21474538.310000] sdhci: Copyright(c) Pierre Ossman
[21474538.325000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[21474538.325000] mapped channel 0 to 0
[21474538.330000] s3c2440-sdi s3c2440-sdi: powered down.
[21474538.335000] s3c2440-sdi s3c2440-sdi: initialisation done.
[21474538.340000] HIFInit
[21474538.355000] Registered led device: neo1973:vibrator
[21474538.360000] Registered led device: gta02-power:orange
[21474538.360000] Registered led device: gta02-power:blue
[21474538.365000] Registered led device: gta02-aux:red
[21474538.415000] usbcore: registered new interface driver usbhid
[21474538.415000] usbhid: v2.6:USB HID core driver
[21474538.430000] logger: created 64K log 'log_main'
[21474538.435000] logger: created 256K log 'log_events'
[21474538.440000] logger: created 64K log 'log_radio'
[21474538.450000] regulator: auto: 3300 mV normal
[21474538.450000] regulator: down1: 1300 <--> 1600 mV normal
[21474538.465000] regulator: down2: 1800 mV normal
[21474538.465000] regulator: ldo1: 3300 <--> 1300 mV normal
[21474538.480000] regulator: ldo2: 3300 mV normal
[21474538.490000] regulator: ldo3: 3000 mV normal
[21474538.500000] regulator: ldo4: 3200 mV normal
[21474538.505000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting
[21474538.515000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 1
[21474538.550000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[21474538.550000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.555000] regulator: ldo5: 3000 mV normal
[21474538.565000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.570000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.580000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.585000] neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power Management:starting
[21474538.600000] regulator: ldo6: 3000 mV normal
[21474538.600000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.605000] regulator: hcldo: 2000 <--> 3300 mV normal
[21474538.630000] Detected S-Media IRQ# pullup, enabling interrupt
[21474538.630000] glamo3362 glamo3362.0: Glamo interrupt registered
[21474538.640000] mmc0: queuing CIS tuple 0x01 length 3
[21474538.660000] mmc0: queuing CIS tuple 0x1a length 5
[21474538.670000] mmc0: queuing CIS tuple 0x1b length 8
[21474538.670000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[21474538.675000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
[21474538.680000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[21474538.690000] mmc0: queuing CIS tuple 0x80 length 1
[21474538.690000] mmc0: queuing CIS tuple 0x81 length 1
[21474538.695000] mmc0: queuing CIS tuple 0x82 length 1
[21474538.700000] mmc0: new SDIO card at address 0001
[21474538.770000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
[21474538.835000] glamo-fb glamo-fb.0: spin_lock_init
[21474538.980000] fbcon_event_notify action=5, data=c781fac0
[21474539.080000] Console: switching to colour frame buffer device 80x58
[21474539.150000] fb0: SMedia Glamo frame buffer device
[21474539.540000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[21474539.595000] AR6000 Reg Code = 0x40000060
[21474539.660000] glamo-spi-gpio glamo-spi-gpio.0: registering c03bf63c: jbt6k74
[21474540.055000] Corgi Backlight Driver Initialized.
[21474540.055000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
[21474540.060000] glamo-mci glamo-mci.0: probe: mapped mci_base:c88a2400 irq:0.
[21474540.070000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
[21474540.075000] glamo-mci glamo-mci.0: initialisation done.
[21474540.080000] regulator: memldo: 1800 mV normal
[21474540.100000] TCP cubic registered
[21474540.105000] NET: Registered protocol family 17
[21474540.110000] Bridge firewalling registered
[21474540.130000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
[21474540.145000] pcf50633-rtc pcf50633-rtc: setting system clock to 2009-02-24 14:20:06 UTC (1235485206)
[21474540.150000] Waiting 5sec before mounting root device...
[21474540.165000] SD power -> 3200mV
[21474540.165000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.175000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.185000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.190000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474540.195000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474540.200000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474540.205000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474540.230000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x40 INT5=0x00
[21474540.260000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474540.290000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474540.310000] SD power -> 2700mV
[21474540.315000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.320000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.330000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.430000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.445000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.450000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
[21474540.460000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
[21474540.465000] mmc1: new high speed SDHC card at address 3d2d
[21474540.475000] mmcblk0: mmc1:3d2d SD08G 3.42 GiB
[21474540.480000] mmcblk0: p1 p2 p3
[21474541.335000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00
[21474541.365000] pcf50633 0-0073: adc result = 6
[21474541.415000] pcf50633 0-0073: usb curlim to 1000 mA
[21474541.490000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474541.520000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474545.185000] kjournald starting. Commit interval 5 seconds
[21474545.395000] EXT3 FS on mmcblk0p2, internal journal
[21474545.400000] EXT3-fs: mounted filesystem with ordered data mode.
[21474545.405000] VFS: Mounted root (ext3 filesystem).
[21474545.410000] Freeing init memory: 156K
[21474570.440000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[21474570.445000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
[21474570.475000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
[21474570.485000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
[21474570.555000] usb usb1: configuration #1 chosen from 1 choice
[21474570.570000] hub 1-0:1.0: USB hub found
[21474570.575000] hub 1-0:1.0: 2 ports detected
[21474570.610000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[21474570.630000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[21474570.635000] usb usb1: Product: S3C24XX OHCI
[21474570.640000] usb usb1: Manufacturer: Linux 2.6.28-20090105.git69b2aa26 ohci_hcd
[21474570.645000] usb usb1: SerialNumber: s3c24xx
[21474570.965000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2
[21474571.215000] usb 1-1: configuration #1 chosen from 1 choice
[21474571.250000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[21474571.260000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21474572.060000] Bluetooth: Core ver 2.13
[21474572.080000] NET: Registered protocol family 31
[21474572.095000] Bluetooth: HCI device and connection manager initialized
[21474572.105000] Bluetooth: HCI socket layer initialized
[21474572.280000] Bluetooth: Generic Bluetooth USB driver ver 0.3
[21474572.295000] usbcore: registered new interface driver btusb
[21474575.190000] Adding 488376k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:488376k
[21474581.395000] EXT3 FS on mmcblk0p2, internal journal
[21474585.535000] g_ether gadget: using random self ethernet address
[21474585.545000] g_ether gadget: using random host ethernet address
[21474585.580000] usb0: MAC fa:01:6d:9c:9d:0f
[21474585.605000] usb0: HOST MAC 0a:b8:87:6c:ca:82
[21474585.610000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[21474585.635000] g_ether gadget: g_ether ready
[21474585.640000] gta02_udc_command S3C2410_UDC_P_ENABLE
[21474586.360000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
[21474588.940000] ASoC version 0.13.2
[21474589.265000] WM8753 Audio Codec 0.16
[21474589.285000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
[21474589.295000] asoc: WM8753 Voice <-> Bluetooth mapping ok
[21474589.540000] pcf50633 0-0073: usb curlim to 500 mA
[21474614.135000] NET: Registered protocol family 10
[21474624.760000] usb0: no IPv6 routers present
[21474626.205000] glamo-mci glamo-mci.0: command timeout, continuing
[21474654.480000] Bluetooth: L2CAP ver 2.11
[21474654.505000] Bluetooth: L2CAP socket layer initialized
[21474655.175000] Bluetooth: RFCOMM socket layer initialized
[21474655.180000] Bluetooth: RFCOMM TTY layer initialized
[21474655.225000] Bluetooth: RFCOMM ver 1.10
[21474658.640000] AR6000 Reg Code = 0x800001ff
[21474665.880000] eth0: no IPv6 routers present
[21474675.410000] fbcon_event_notify action=1, data=c6ed9dc8
[21474732.610000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x01 INT4=0x00 INT5=0x00
[21474732.670000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474732.690000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474799.395000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[21474799.420000] usb 1-1: USB disconnect, address 2
[21474799.420000] btusb_intr_complete: hci0 urb c6d80e60 failed to resubmit (19)
[21474799.430000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[21474799.475000] btusb_send_frame: hci0 urb c6e7d820 submission failed
[21474799.995000] debug_hdr_ptr: 0x800018b0
[21474805.085000] Unable to handle kernel NULL pointer dereference at virtual address 00000126
[21474805.090000] pgd = c1bb8000
[21474805.090000] [00000126] *pgd=36c6a031<7>ar6000_wow interrupt
[21474805.105000] , *pte=00000000, *ppte=00000000
[21474805.105000] Internal error: Oops: 17 [#1] PREEMPT
[21474805.105000] Modules linked in: rfcomm l2cap ipv6 snd_soc_neo1973_gta02_wm8753 snd_soc_s3c24xx_i2s snd_soc_s3c24xx snd_soc_wm8753 snd_soc_core snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd g_ether btusb bluetooth ohci_hcd
[21474805.105000] CPU: 0 Not tainted (2.6.28-20090105.git69b2aa26 #1)
[21474805.105000] PC is at wmi_get_power_mode_cmd+0xc/0x14
[21474805.105000] LR is at ar6000_ioctl_giwpower+0x14/0x18
[21474805.105000] pc : [<c0234af8>] lr : [<c022e9f8>] psr: 20000013
[21474805.105000] sp : c1befd98 ip : c1befda8 fp : c1befda4
[21474805.105000] r10: 00008b2d r9 : c79f2000 r8 : 00000001
[21474805.105000] r7 : 03d37c30 r6 : c0300098 r5 : c1befe88 r4 : 00008b2d
[21474805.105000] r3 : 00000000 r2 : c1befe88 r1 : c1befe2c r0 : 00000000
[21474805.105000] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[21474805.105000] Control: c000717f Table: 31bb8000 DAC: 00000015
[21474805.105000] Process iwconfig (pid: 2231, stack limit = 0xc1bee268)
[21474805.105000] Stack: (0xc1befd98 to 0xc1bf0000)
[21474805.105000] fd80: c1befdb4 c1befda8
[21474805.105000] fda0: c022e9f8 c0234afc c1befe1c c1befdb8 c02d803c c022e9f4 c1befe2c c1befdc8
[21474805.105000] fdc0: c026ff10 c03e1ec4 c03e19d4 22222222 22222222 22222222 22222222 22222222
[21474805.105000] fde0: c1befe04 00008b2d 00000000 c79f2000 c1befe1c 00008b2d c1befe78 c090e6e4
[21474805.105000] fe00: 03d37c30 00000001 c1bee000 03d37c30 c1befe54 c1befe20 c02d7b98 c02d7fdc
[21474805.105000] fe20: c022e9e4 c0181580 c6c6e2c0 00008b2d c1befefc 00000000 00008b2d c1befe78
[21474805.105000] fe40: c090e6e4 00000000 c1befecc c1befe58 c0267b24 c02d7aec 40030f3c c6c6e2f8
[21474805.105000] fe60: c1befe84 c1befe70 c02decc0 c00442e4 c6c6e2f4 c6c6e2f8 30687465 00000000
[21474805.105000] fe80: 00000000 00000000 000f4240 00000002 00000038 03d37e08 c1befebc c1befea8
[21474805.105000] fea0: c0062fc4 c6ffa600 00008b2d 03d37c30 c6ffa600 c0030024 c1bee000 03d37c30
[21474805.105000] fec0: c1befeec c1befed0 c02573bc c0267480 c006906c c6ffa600 03d37c30 00008b2d
[21474805.105000] fee0: c1beff0c c1befef0 c00b13d4 c02571ac c1beffac c74aa5c8 c6ffa600 00008b2d
[21474805.105000] ff00: c1beff7c c1beff10 c00b19c8 c00b13a8 c0030024 c6f91444 c1beff3c c1beff28
[21474805.105000] ff20: c02ded10 c00442e4 00000002 c6f91420 c1beff5c c1beff40 c00a2b1c c02decec
[21474805.105000] ff40: 00000000 00000002 c74aa580 00000119 c1beff84 00000002 03d37c30 00008b2d
[21474805.105000] ff60: c6ffa600 c0030024 c1bee000 03d37924 c1beffa4 c1beff80 c00b1a60 c00b154c
[21474805.105000] ff80: ffffffff 00000000 03d37c30 03d37eed 00000002 00000036 00000000 c1beffa8
[21474805.105000] ffa0: c002fea0 c00b1a30 03d37c30 03d37eed 00000002 00008b2d 03d37c30 03d37c3f
[21474805.105000] ffc0: 03d37c30 03d37eed 00000002 00000036 03d37e04 00000000 03d37924 00000000
[21474805.105000] ffe0: 03d377b8 03d377a8 0000ac10 401a4fbc 60000010 00000002 4023b850 00000000
[21474805.105000] Backtrace:
[21474805.105000] [<c0234aec>] (wmi_get_power_mode_cmd+0x0/0x14) from [<c022e9f8>] (ar6000_ioctl_giwpower+0x14/0x18)
[21474805.105000] [<c022e9e4>] (ar6000_ioctl_giwpower+0x0/0x18) from [<c02d803c>] (ioctl_standard_call+0x70/0x3c4)
[21474805.105000] [<c02d7fcc>] (ioctl_standard_call+0x0/0x3c4) from [<c02d7b98>] (wext_handle_ioctl+0xbc/0x224)
[21474805.105000] [<c02d7adc>] (wext_handle_ioctl+0x0/0x224) from [<c0267b24>] (dev_ioctl+0x6b4/0x71c)
[21474805.105000] r8:00000000 r7:c090e6e4 r6:c1befe78 r5:00008b2d r4:00000000
[21474805.105000] [<c0267470>] (dev_ioctl+0x0/0x71c) from [<c02573bc>] (sock_ioctl+0x220/0x260)
[21474805.105000] [<c025719c>] (sock_ioctl+0x0/0x260) from [<c00b13d4>] (vfs_ioctl+0x3c/0x9c)
[21474805.105000] r6:00008b2d r5:03d37c30 r4:c6ffa600
[21474805.105000] [<c00b1398>] (vfs_ioctl+0x0/0x9c) from [<c00b19c8>] (do_vfs_ioctl+0x48c/0x4e4)
[21474805.105000] r6:00008b2d r5:c6ffa600 r4:c74aa5c8
[21474805.105000] [<c00b153c>] (do_vfs_ioctl+0x0/0x4e4) from [<c00b1a60>] (sys_ioctl+0x40/0x60)
[21474805.105000] [<c00b1a20>] (sys_ioctl+0x0/0x60) from [<c002fea0>] (ret_fast_syscall+0x0/0x2c)
[21474805.105000] r7:00000036 r6:00000002 r5:03d37eed r4:03d37c30
[21474805.105000] Code: c02fc634 e1a0c00d e92dd800 e24cb004 (e5d00126)
[21474805.110000] ---[ end trace 368ed6f8a1c96d59 ]---
-------------- next part --------------
[ 0.000000] Linux version 2.6.28-rc4 (sschmidt at shell) (gcc version 4.1.2) #1 PREEMPT Mon Feb 2 19:51:28 UTC 2009
[ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: GTA02
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03e4eb4, node_mem_map c0911000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] CPU S3C2442B (id 0x32440aab)
[ 0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
[ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
[ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] irq: clearing pending ext status 000812f0
[ 0.000000] irq: clearing pending ext status 000802d0
[ 0.000000] irq: clearing subpending status 00000082
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
[21474536.485000] Console: colour dummy device 80x30
[21474536.485000] console [tty0] enabled
[21474536.490000] console [ttySAC2] enabled
[21474536.495000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[21474536.500000] ... MAX_LOCKDEP_SUBCLASSES: 8
[21474536.505000] ... MAX_LOCK_DEPTH: 48
[21474536.505000] ... MAX_LOCKDEP_KEYS: 8191
[21474536.510000] ... CLASSHASH_SIZE: 4096
[21474536.515000] ... MAX_LOCKDEP_ENTRIES: 8192
[21474536.520000] ... MAX_LOCKDEP_CHAINS: 16384
[21474536.525000] ... CHAINHASH_SIZE: 8192
[21474536.530000] memory used by lock dependency info: 2527 kB
[21474536.535000] per task-struct memory footprint: 2304 bytes
[21474536.540000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[21474536.545000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[21474536.575000] Memory: 128MB = 128MB total
[21474536.575000] Memory: 120504KB available (3616K code, 5484K data, 140K init)
[21474536.580000] Calibrating delay loop... 198.65 BogoMIPS (lpj=496640)
[21474536.685000] Mount-cache hash table entries: 512
[21474536.690000] CPU: Testing write buffer coherency: ok
[21474536.705000] net_namespace: 816 bytes
[21474536.715000] regulator: core version 0.5
[21474536.720000] NET: Registered protocol family 16
[21474536.775000] S3C Power Management, Copyright 2004 Simtec Electronics
[21474536.775000] modem wakeup interrupt
[21474536.780000] wake enabled for irq 17
[21474536.785000] wake enabled for irq 49
[21474536.805000] S3C2442: Initialising architecture
[21474536.805000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[21474536.810000] DMA channel 0 at c8808000, irq 33
[21474536.815000] DMA channel 1 at c8808040, irq 34
[21474536.820000] DMA channel 2 at c8808080, irq 35
[21474536.825000] DMA channel 3 at c88080c0, irq 36
[21474536.830000] S3C244X: Clock Support, DVS off
[21474536.995000] usbcore: registered new interface driver usbfs
[21474537.000000] usbcore: registered new interface driver hub
[21474537.005000] usbcore: registered new device driver usb
[21474537.065000] NET: Registered protocol family 2
[21474537.120000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[21474537.130000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[21474537.130000] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[21474537.135000] TCP: Hash tables configured (established 4096 bind 4096)
[21474537.140000] TCP reno registered
[21474537.160000] NET: Registered protocol family 1
[21474537.165000] s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered
[21474537.170000] Enabling FIQ using irq 29
[21474537.170000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
[21474537.185000] gta02-pm-wlan gta02-pm-wlan.0: starting
[21474537.410000] ashmem: initialized
[21474537.415000] JFFS2 version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc.
[21474537.420000] msgmni has been set to 235
[21474537.435000] alg: No test for stdrng (krng)
[21474537.435000] alg: No test for stdrng (ansi_cprng)
[21474537.435000] io scheduler noop registered
[21474537.440000] io scheduler deadline registered (default)
[21474537.495000] ##### init_resume_dependency_list(head=c03d5c9c)
[21474537.495000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
[21474537.500000] ##### init_resume_dependency_list(head=c03d5d78)
[21474537.505000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
[21474537.515000] ##### init_resume_dependency_list(head=c03d5e54)
[21474537.520000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
[21474537.605000] brd: module loaded
[21474537.605000] neo1973-version neo1973-version.0: starting
[21474537.635000] physmap platform flash device: 00200000 at 18000000
[21474537.635000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[21474537.640000] Intel/Sharp Extended Query Table at 0x0039
[21474537.645000] Intel/Sharp Extended Query Table at 0x0039
[21474537.650000] Intel/Sharp Extended Query Table at 0x0039
[21474537.655000] Intel/Sharp Extended Query Table at 0x0039
[21474537.660000] Intel/Sharp Extended Query Table at 0x0039
[21474537.665000] cfi_cmdset_0001: Erase suspend on write enabled
[21474537.670000] erase region 0: offset=0x0,size=0x2000,blocks=8
[21474537.675000] erase region 1: offset=0x10000,size=0x10000,blocks=31
[21474537.680000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
[21474537.685000] RedBoot partition parsing not available
[21474537.700000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
[21474537.705000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
[21474537.710000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
[21474537.715000] Bad block table found at page 131008, version 0x01
[21474537.720000] Bad block table found at page 130944, version 0x01
[21474537.725000] nand_read_bbt: Bad block at 0x01a00000
[21474537.730000] 6 cmdlinepart partitions found on MTD device neo1973-nand
[21474537.735000] Creating 6 MTD partitions on "neo1973-nand":
[21474537.740000] 0x00000000-0x00040000 : "u-boot"
[21474537.750000] 0x00040000-0x00080000 : "u-boot_env"
[21474537.760000] 0x00080000-0x00880000 : "kernel"
[21474537.770000] 0x00880000-0x00920000 : "splash"
[21474537.780000] 0x00920000-0x00960000 : "factory"
[21474537.790000] 0x00960000-0x10000000 : "rootfs"
[21474537.810000] usbcore: registered new interface driver libusual
[21474537.825000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
[21474537.830000] gta02_udc_command S3C2410_UDC_P_DISABLE
[21474537.840000] mice: PS/2 mouse device common for all mice
[21474537.855000] i2c /dev entries driver
[21474537.860000] s3c2440-i2c s3c2440-i2c: slave address 0x10
[21474537.860000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
[21474537.895000] pcf50633 0-0073: Probed device version 19 variant 132
[21474537.945000] input: GTA02 PMU events as /class/input/input0
[21474537.990000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633 as rtc0
[21474538.025000] wake enabled for irq 53
[21474538.025000] s3c2440-ts s3c2440-ts: Starting
[21474538.030000] Created group ts filter len 12 depth 2 close 10 thresh 6
[21474538.035000] Created Median ts filter len 20 depth 2 dec 24
[21474538.040000] Created Mean ts filter len 4 depth 2 thresh 65535
[21474538.045000] Created Linear ts filter depth 2
[21474538.050000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized
[21474538.055000] s3c2440-ts s3c2440-ts: successfully loaded
[21474538.065000] input: s3c2410 TouchScreen as /class/input/input1
[21474538.070000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x40 INT5=0x00
[21474538.095000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474538.100000] neo1973-pm-host neo1973-pm-host.0: starting
[21474538.105000] input: lis302-1 (top) as /class/input/input2
[21474538.115000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474538.125000] lis302dl lis302dl.1: Found lis302-1 (top)
[21474538.130000] input: lis302-2 (bottom) as /class/input/input3
[21474538.150000] lis302dl lis302dl.2: Found lis302-2 (bottom)
[21474538.155000] input: Neo1973 Buttons as /class/input/input4
[21474538.190000] wake enabled for irq 48
[21474538.195000] neo1973-resume neo1973-resume.0: starting
[21474538.200000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
[21474538.220000] APM Battery Driver
[21474538.225000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
[21474538.270000] cpuidle: using governor ladder
[21474538.270000] sdhci: Secure Digital Host Controller Interface driver
[21474538.275000] sdhci: Copyright(c) Pierre Ossman
[21474538.285000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[21474538.290000] mapped channel 0 to 0
[21474538.295000] s3c2440-sdi s3c2440-sdi: powered down.
[21474538.295000] s3c2440-sdi s3c2440-sdi: initialisation done.
[21474538.300000] HIFInit
[21474538.315000] Registered led device: neo1973:vibrator
[21474538.315000] Registered led device: gta02-power:orange
[21474538.320000] Registered led device: gta02-power:blue
[21474538.325000] Registered led device: gta02-aux:red
[21474538.375000] usbcore: registered new interface driver usbhid
[21474538.375000] usbhid: v2.6:USB HID core driver
[21474538.390000] logger: created 64K log 'log_main'
[21474538.395000] logger: created 256K log 'log_events'
[21474538.395000] logger: created 64K log 'log_radio'
[21474538.410000] regulator: auto: 3300 mV normal
[21474538.410000] regulator: down1: 1300 <--> 1600 mV normal
[21474538.425000] regulator: down2: 1800 mV normal
[21474538.425000] regulator: ldo1: 3300 <--> 1300 mV normal
[21474538.440000] regulator: ldo2: 3300 mV normal
[21474538.450000] regulator: ldo3: 3000 mV normal
[21474538.460000] regulator: ldo4: 3200 mV normal
[21474538.465000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting
[21474538.475000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 1
[21474538.510000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[21474538.510000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.515000] regulator: ldo5: 3000 mV normal
[21474538.525000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.530000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.540000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.545000] neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power Management:starting
[21474538.560000] regulator: ldo6: 3000 mV normal
[21474538.560000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[21474538.565000] regulator: hcldo: 2000 <--> 3300 mV normal
[21474538.590000] Detected S-Media IRQ# pullup, enabling interrupt
[21474538.590000] glamo3362 glamo3362.0: Glamo interrupt registered
[21474538.600000] mmc0: queuing CIS tuple 0x01 length 3
[21474538.620000] mmc0: queuing CIS tuple 0x1a length 5
[21474538.630000] mmc0: queuing CIS tuple 0x1b length 8
[21474538.630000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[21474538.635000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[21474538.640000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
[21474538.650000] mmc0: queuing CIS tuple 0x80 length 1
[21474538.650000] mmc0: queuing CIS tuple 0x81 length 1
[21474538.655000] mmc0: queuing CIS tuple 0x82 length 1
[21474538.660000] mmc0: new SDIO card at address 0001
[21474538.735000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
[21474538.800000] glamo-fb glamo-fb.0: spin_lock_init
[21474538.945000] fbcon_event_notify action=5, data=c781fa88
[21474539.035000] Console: switching to colour frame buffer device 80x58
[21474539.105000] fb0: SMedia Glamo frame buffer device
[21474539.500000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[21474539.560000] AR6000 Reg Code = 0x40000060
[21474539.625000] glamo-spi-gpio glamo-spi-gpio.0: registering c03bd62c: jbt6k74
[21474540.015000] Corgi Backlight Driver Initialized.
[21474540.015000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
[21474540.020000] glamo-mci glamo-mci.0: probe: mapped mci_base:c88a2400 irq:0.
[21474540.030000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
[21474540.035000] glamo-mci glamo-mci.0: initialisation done.
[21474540.040000] regulator: memldo: 1800 mV normal
[21474540.065000] TCP cubic registered
[21474540.065000] NET: Registered protocol family 17
[21474540.070000] Bridge firewalling registered
[21474540.090000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
[21474540.105000] pcf50633-rtc pcf50633-rtc: setting system clock to 2009-02-24 15:11:42 UTC (1235488302)
[21474540.110000] Waiting 5sec before mounting root device...
[21474540.125000] SD power -> 3200mV
[21474540.125000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.135000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.140000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.145000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474540.150000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474540.155000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474540.160000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474540.185000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x40 INT5=0x00
[21474540.210000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474540.235000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474540.250000] SD power -> 2700mV
[21474540.255000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.260000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.265000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.375000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.390000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
[21474540.395000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
[21474540.400000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
[21474540.405000] mmc1: new high speed SDHC card at address 3d2d
[21474540.415000] mmcblk0: mmc1:3d2d SD08G 3.42 GiB
[21474540.420000] mmcblk0: p1 p2 p3
[21474541.300000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00
[21474541.325000] pcf50633 0-0073: adc result = 6
[21474541.370000] pcf50633 0-0073: usb curlim to 1000 mA
[21474541.445000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474541.475000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474545.145000] kjournald starting. Commit interval 5 seconds
[21474545.370000] EXT3 FS on mmcblk0p2, internal journal
[21474545.380000] EXT3-fs: mounted filesystem with ordered data mode.
[21474545.385000] VFS: Mounted root (ext3 filesystem).
[21474545.390000] Freeing init memory: 140K
[21474570.295000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[21474570.300000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
[21474570.325000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
[21474570.330000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
[21474570.405000] usb usb1: configuration #1 chosen from 1 choice
[21474570.420000] hub 1-0:1.0: USB hub found
[21474570.430000] hub 1-0:1.0: 2 ports detected
[21474570.465000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[21474570.470000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[21474570.475000] usb usb1: Product: S3C24XX OHCI
[21474570.495000] usb usb1: Manufacturer: Linux 2.6.28-rc4 ohci_hcd
[21474570.500000] usb usb1: SerialNumber: s3c24xx
[21474570.810000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2
[21474571.080000] usb 1-1: configuration #1 chosen from 1 choice
[21474571.110000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[21474571.115000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21474572.490000] Bluetooth: Core ver 2.13
[21474572.505000] NET: Registered protocol family 31
[21474572.510000] Bluetooth: HCI device and connection manager initialized
[21474572.515000] Bluetooth: HCI socket layer initialized
[21474572.695000] Bluetooth: Generic Bluetooth USB driver ver 0.3
[21474572.715000] usbcore: registered new interface driver btusb
[21474575.825000] Adding 488376k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:488376k
[21474581.575000] EXT3 FS on mmcblk0p2, internal journal
[21474586.190000] g_ether gadget: using random self ethernet address
[21474586.200000] g_ether gadget: using random host ethernet address
[21474586.245000] usb0: MAC 06:d0:c7:34:40:cd
[21474586.265000] usb0: HOST MAC 1a:68:e7:60:d6:60
[21474586.295000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[21474586.300000] g_ether gadget: g_ether ready
[21474586.315000] gta02_udc_command S3C2410_UDC_P_ENABLE
[21474587.025000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
[21474590.050000] pcf50633 0-0073: usb curlim to 500 mA
[21474591.080000] ASoC version 0.13.2
[21474591.685000] WM8753 Audio Codec 0.16
[21474591.760000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
[21474591.770000] asoc: WM8753 Voice <-> Bluetooth mapping ok
[21474618.695000] NET: Registered protocol family 10
[21474629.610000] usb0: no IPv6 routers present
[21474654.895000] Bluetooth: L2CAP ver 2.11
[21474654.940000] Bluetooth: L2CAP socket layer initialized
[21474656.205000] Bluetooth: RFCOMM socket layer initialized
[21474656.210000] Bluetooth: RFCOMM TTY layer initialized
[21474656.215000] Bluetooth: RFCOMM ver 1.10
[21474661.125000] AR6000 Reg Code = 0x800001ff
[21474668.275000] eth0: no IPv6 routers present
[21474672.660000] fbcon_event_notify action=1, data=c61bbdd0
[21474680.345000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x01 INT4=0x00 INT5=0x00
[21474680.445000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474680.470000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00
[21474802.990000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[21474803.010000] usb 1-1: USB disconnect, address 2
[21474803.010000] btusb_intr_complete: hci0 urb c6d920e0 failed to resubmit (19)
[21474803.020000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[21474803.055000] btusb_send_frame: hci0 urb c6d920e0 submission failed
[21474803.960000] debug_hdr_ptr: 0x800018b0
[21474808.690000] ar6000_wow interrupt
[21474810.185000] Unable to handle kernel NULL pointer dereference at virtual address 00000126
[21474810.185000] pgd = c2228000
[21474810.190000] [00000126] *pgd=36392031, *pte=00000000, *ppte=00000000
[21474810.205000] Internal error: Oops: 17 [#1] PREEMPT
[21474810.205000] Modules linked in: rfcomm l2cap ipv6 snd_soc_neo1973_gta02_wm8753 snd_soc_s3c24xx_i2s snd_soc_s3c24xx snd_soc_wm8753 snd_soc_core snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd g_ether btusb bluetooth ohci_hcd
[21474810.205000] CPU: 0 Not tainted (2.6.28-rc4 #1)
[21474810.205000] PC is at wmi_get_power_mode_cmd+0xc/0x14
[21474810.205000] LR is at ar6000_ioctl_giwpower+0x14/0x18
[21474810.205000] pc : [<c0230d98>] lr : [<c022afd8>] psr: 20000013
[21474810.205000] sp : c6323da0 ip : c6323db0 fp : c6323dac
[21474810.205000] r10: 00000000 r9 : c6322000 r8 : 00000001
[21474810.205000] r7 : 00008b2d r6 : c02fc4fc r5 : c6323e80 r4 : c6323e90
[21474810.205000] r3 : 00000000 r2 : c6323e90 r1 : c6323e34 r0 : 00000000
[21474810.205000] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[21474810.205000] Control: c000717f Table: 32228000 DAC: 00000015
[21474810.205000] Process iwconfig (pid: 2242, stack limit = 0xc6322268)
[21474810.205000] Stack: (0xc6323da0 to 0xc6324000)
[21474810.205000] 3da0: c6323dbc c6323db0 c022afd8 c0230d9c c6323e24 c6323dc0 c02d4328 c022afd4
[21474810.205000] 3dc0: 00000001 c6323e34 c7a0a000 c03dfa34 c6323e80 22222222 22222222 22222222
[21474810.205000] 3de0: 22222222 22222222 c6323e0c 00008b2d c6323e80 c090c754 c6323e24 00008b2d
[21474810.205000] 3e00: c6323e80 c090c754 03d35c30 00000001 c6322000 00000000 c6323e5c c6323e28
[21474810.205000] 3e20: c02d3f40 c02d42d0 c022afc4 00000000 c6323e6c 00008b2d c0066f38 00000000
[21474810.205000] 3e40: 00008b2d 03d35c30 c6323e80 c090c754 c6323ed4 c6323e60 c02644ac c02d3e1c
[21474810.205000] 3e60: c6323e84 c6323e70 c02db600 c003fa68 c7a5e2f4 c7a5e2f8 c6323ea4 c6323e88
[21474810.205000] 3e80: 30687465 00000000 00000000 00000000 000f4240 00000002 00000038 03d35e08
[21474810.205000] 3ea0: c005ea20 c017d2f8 c6323fb0 c6345ca0 00008b2d 03d35c30 03d35c30 c002bfe4
[21474810.205000] 3ec0: c6322000 03d35924 c6323ef4 c6323ed8 c025535c c0263e14 c03b9334 c6345ca0
[21474810.205000] 3ee0: 03d35c30 00008b2d c6323f14 c6323ef8 c00abd64 c0255158 c002b218 c6345ca0
[21474810.205000] 3f00: c76fc328 00008b2d c6323f7c c6323f18 c00ac34c c00abd38 c6c8cca4 c7872240
[21474810.205000] 3f20: c6323f44 c6323f30 c005ea20 c017d2f8 c6323fb0 00000200 c6323f84 c6323f48
[21474810.205000] 3f40: c0031668 c005ea04 00000002 00000000 00000002 00000000 c6345ca0 fffffff7
[21474810.205000] 3f60: 00008b2d 00000036 c002bfe4 03d35924 c6323fa4 c6323f80 c00ac3f0 c00abedc
[21474810.205000] 3f80: c00317c8 00000000 ffffffff 03d35c30 03d35eed 00000002 00000000 c6323fa8
[21474810.205000] 3fa0: c002be60 c00ac3c0 03d35c30 03d35eed 00000002 00008b2d 03d35c30 03d35c3f
[21474810.205000] 3fc0: 03d35c30 03d35eed 00000002 00000036 03d35e04 00000000 03d35924 00000000
[21474810.205000] 3fe0: 03d357b8 03d357a8 0000ac10 401a4fbc 60000010 00000002 00000002 00000014
[21474810.205000] Backtrace:
[21474810.205000] [<c0230d8c>] (wmi_get_power_mode_cmd+0x0/0x14) from [<c022afd8>] (ar6000_ioctl_giwpower+0x14/0x18)
[21474810.205000] [<c022afc4>] (ar6000_ioctl_giwpower+0x0/0x18) from [<c02d4328>] (ioctl_standard_call+0x68/0x3a8)
[21474810.205000] [<c02d42c0>] (ioctl_standard_call+0x0/0x3a8) from [<c02d3f40>] (wext_handle_ioctl+0x134/0x224)
[21474810.205000] [<c02d3e0c>] (wext_handle_ioctl+0x0/0x224) from [<c02644ac>] (dev_ioctl+0x6a8/0x72c)
[21474810.205000] r8:c090c754 r7:c6323e80 r6:03d35c30 r5:00008b2d r4:00000000
[21474810.205000] [<c0263e04>] (dev_ioctl+0x0/0x72c) from [<c025535c>] (sock_ioctl+0x214/0x254)
[21474810.205000] [<c0255148>] (sock_ioctl+0x0/0x254) from [<c00abd64>] (vfs_ioctl+0x3c/0x9c)
[21474810.205000] r6:00008b2d r5:03d35c30 r4:c6345ca0
[21474810.205000] [<c00abd28>] (vfs_ioctl+0x0/0x9c) from [<c00ac34c>] (do_vfs_ioctl+0x480/0x4e4)
[21474810.205000] r6:00008b2d r5:c76fc328 r4:c6345ca0
[21474810.205000] [<c00abecc>] (do_vfs_ioctl+0x0/0x4e4) from [<c00ac3f0>] (sys_ioctl+0x40/0x60)
[21474810.205000] [<c00ac3b0>] (sys_ioctl+0x0/0x60) from [<c002be60>] (ret_fast_syscall+0x0/0x2c)
[21474810.205000] r6:00000002 r5:03d35eed r4:03d35c30
[21474810.205000] Code: c02f8a78 e1a0c00d e92dd800 e24cb004 (e5d00126)
[21474810.210000] ---[ end trace ff1ed2d28f735b5e ]---
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
Url : http://lists.alioth.debian.org/pipermail/pkg-fso-maint/attachments/20090224/4dce6e90/attachment-0001.pgp
More information about the pkg-fso-maint
mailing list