Bug#527984: libopenal1: Missing comment marks (#) in alsoft.conf
GSR
gsr.bugs at infernal-iceberg.com
Sun May 10 00:09:45 UTC 2009
Package: libopenal1
Version: 1:1.7.411-1
Severity: normal
Tags: patch
I noticed an app I was testing started to report:
---8<---
AL lib: alcConfig.c:146: config parse error: option without a value: "specified"
AL lib: alcConfig.c:146: config parse error: option without a value: "goes"
AL lib: alcConfig.c:146: config parse error: option without a value: "circular"
AL lib: alcConfig.c:146: config parse error: option without a value: "negative,"
AL lib: alcConfig.c:146: config parse error: option without a value: "speakers"
AL lib: alcConfig.c:146: config parse error: option without a value: "speakers"
AL lib: alcConfig.c:146: config parse error: option without a value: "The"
AL lib: alcConfig.c:146: config parse error: option without a value: "Available"
AL lib: alcConfig.c:146: config parse error: option without a value: "front-right(fr),"
AL lib: alcConfig.c:146: config parse error: option without a value: "The"
AL lib: alcConfig.c:146: config parse error: option without a value: "speakers"
AL lib: alcConfig.c:146: config parse error: option without a value: "front-right(fr),"
AL lib: alcConfig.c:146: config parse error: option without a value: "The"
AL lib: alcConfig.c:146: config parse error: option without a value: "speakers"
AL lib: alcConfig.c:146: config parse error: option without a value: "front-right(fr),"
AL lib: alcConfig.c:146: config parse error: option without a value: "The"
AL lib: alcConfig.c:146: config parse error: option without a value: "speakers"
AL lib: alcConfig.c:146: config parse error: option without a value: "front-center(fc),"
AL lib: alcConfig.c:146: config parse error: option without a value: "back-right(br)."
AL lib: alcConfig.c:146: config parse error: option without a value: "The"
--->8---
I looked in the config file /etc/openal/alsoft.conf and it seems to be
missing some comment marks (#). See attached file for working config.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-1-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages libopenal1 depends on:
ii libc6 2.9-12 GNU C Library: Shared libraries
libopenal1 recommends no packages.
libopenal1 suggests no packages.
-- no debconf information
-------------- next part --------------
# OpenAL config file. Options that are not under a block or are under the
# [general] block are for general, non-backend-specific options. Blocks may
# appear multiple times, and duplicated options will take the last value
# specified.
# The system-wide settings can be put in /etc/openal/alsoft.conf and user-
# specific override settings in ~/.alsoftrc.
# For Windows, these settings should go into %AppData%\alsoft.ini
# The environment variable ALSOFT_CONF can be used to specify another config
# override
# Option and block names are case-insenstive. The supplied values are only
# hints and may not be honored (though generally it'll try to get as close as
# possible). These are the current available settings:
format = AL_FORMAT_STEREO16 # Sets the output format. Can be one of:
# AL_FORMAT_MONO8 (8-bit mono)
# AL_FORMAT_STEREO8 (8-bit stereo)
# AL_FORMAT_QUAD8 (8-bit 4-channel)
# AL_FORMAT_51CHN8 (8-bit 5.1 output)
# AL_FORMAT_61CHN8 (8-bit 6.1 output)
# AL_FORMAT_71CHN8 (8-bit 7.1 output)
# AL_FORMAT_MONO16 (16-bit mono)
# AL_FORMAT_STEREO16 (16-bit stereo)
# AL_FORMAT_QUAD16 (16-bit 4-channel)
# AL_FORMAT_51CHN16 (16-bit 5.1 output)
# AL_FORMAT_61CHN16 (16-bit 6.1 output)
# AL_FORMAT_71CHN16 (16-bit 7.1 output)
# Default is AL_FORMAT_STEREO16
cf_level = 0 # Sets the crossfeed level for stereo output. Valid values are:
# 0 - No crossfeed
# 1 - Low crossfeed
# 2 - Middle crossfeed
# 3 - High crossfeed (virtual speakers are closer to itself)
# 4 - Low easy crossfeed
# 5 - Middle easy crossfeed
# 6 - High easy crossfeed
# Default is 0. Users of headphones may want to try various
# settings. Has no effect on non-stereo modes.
frequency = 44100 # Sets the output frequency. Default is 44100
refresh = 4096 # Sets the buffer size, in frames. Default is 4096. Note that
# the actual granularity may or may not be less than this.
sources = 256 # Sets the maximum number of allocatable sources. Lower values
# may help for systems with apps that try to play more sounds
# than the CPU can handle. Default is 256
stereodup = # Sets whether to duplicate stereo sounds on the rear and side
# speakers for 4+ channel output. This can make stereo sources
# substantially louder than mono or even 4+ channel sources, but
# provides a "fuller" playback quality. True, yes, on, and non-0
# values will duplicate stereo sources. 0 and anything else will
# cause stereo sounds to only play out the front speakers.
# Default is false
drivers = # Sets the backend driver list order, comma-seperated. Unknown
# backends and duplicated names are ignored, and unlisted backends
# won't be considered for use. An empty list means the default.
# Default is:
# alsa,oss,solaris,dsound,winmm,port,wave
excludefx = # Sets which effects to exclude, preventing apps from using them.
# This can help for apps that try to use effects which are too CPU
# intensive for the system to handle. Available effects are:
# reverb
# Default is empty (all available effects enabled)
layout_STEREO = # Sets the speaker layout when using stereo output. Values are
# specified in degrees, where 0 is straight in front, negative
# goes left, and positive goes right. The values must define a
# circular pattern, starting with the back-left at the most
# negative, around the front to back-center. Unspecified
# speakers will remain at their default position. Available
# speakers are front-left(fl) and front-right(fr).
# The default is:
fl=-90, fr=90
layout_QUAD = # Sets the speaker layout when using quadriphonic output.
# Available speakers are back-left(bl), front-left(fl),
# front-right(fr), and back-right(br).
# The default is:
bl=-135, fl=-45, fr=45, br=135
layout_51CHN = # Sets the speaker layout when using 5.1 output. Available
# speakers are back-left(bl), front-left(fl), front-center(fc),
# front-right(fr), and back-right(br).
# The default is:
bl=-110, fl=-30, fc=0, fr=30, br=110
layout_61CHN = # Sets the speaker layout when using 6.1 output. Available
# speakers are side-left(sl), front-left(fl), front-center(fc),
# front-right(fr), side-right(sr), and back-center(bc).
# The default is:
sl=-90, fl=-30, fc=0, fr=30, sr=90, bc=180
layout_71CHN = # Sets the speaker layout when using 7.1 output. Available
# speakers are back-left(bl), side-left(sl), front-left(fl),
# front-center(fc), front-right(fr), side-right(sr), and
# back-right(br).
# The default is:
bl=-150, sl=-90, fl=-30, fc=0, fr=30, sr=90 br=150
[alsa] # ALSA backend stuff
device = default # Sets the device name for the default playback device.
# Default is default
periods = 0 # Sets the number of update buffers for playback. A value of 0
# means auto-select. Default is 0
capture = default # Sets the device name for the default capture device.
# Default is default
mmap = true # Sets whether to try using mmap mode (helps reduce latencies and
# CPU consumption). If mmap isn't available, it will automatically
# fall back to non-mmap mode. True, yes, on, and non-0 values will
# attempt to use mmap. 0 and anything else will force mmap off.
# Default is true.
[oss] # OSS backend stuff
device = /dev/dsp # Sets the device name for OSS output. Default is /dev/dsp
periods = 4 # Sets the number of update buffers. Default is 4
capture = /dev/dsp # Sets the device name for OSS capture. Default is /dev/dsp
[solaris] # Solaris backend stuff
device = /dev/audio # Sets the device name for Solaris output. Default is
# /dev/audio
[dsound] # DirectSound backend stuff
periods = 4 # Sets the number of updates for the output buffer. Default is 4
[winmm] # Windows Multimedia backend stuff
# Nothing yet...
[port] # PortAudio backend stuff
device = -1 # Sets the device index for output. Negative values will use the
# default as given by PortAudio itself. Default is -1
periods = 4 # Sets the number of update buffers. Default is 4
[wave] # Wave File Writer stuff
file = # Sets the filename of the wave file to write to. An empty name
# prevents the backend from opening, even when explicitly requested.
# THIS WILL OVERWRITE EXISTING FILES WITHOUT QUESTION!
# Default is empty
More information about the Pkg-games-devel
mailing list