r24013 - in /desktop/unstable/libart-lgpl/debian: changelog control control.in patches/70_relibtoolize.patch
slomo at users.alioth.debian.org
slomo at users.alioth.debian.org
Sun Apr 25 09:36:50 UTC 2010
Author: slomo
Date: Sun Apr 25 09:36:48 2010
New Revision: 24013
URL: http://svn.debian.org/wsvn/pkg-gnome/?sc=1&rev=24013
Log:
* New upstream bugfix release:
+ debian/control.in:
- Update Standards-Version and build-depend on autotools-dev.
+ debian/patches/70_relibtoolize.patch:
- Regenerated for the new version.
Modified:
desktop/unstable/libart-lgpl/debian/changelog
desktop/unstable/libart-lgpl/debian/control
desktop/unstable/libart-lgpl/debian/control.in
desktop/unstable/libart-lgpl/debian/patches/70_relibtoolize.patch
Modified: desktop/unstable/libart-lgpl/debian/changelog
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libart-lgpl/debian/changelog?rev=24013&op=diff
==============================================================================
--- desktop/unstable/libart-lgpl/debian/changelog [utf-8] (original)
+++ desktop/unstable/libart-lgpl/debian/changelog [utf-8] Sun Apr 25 09:36:48 2010
@@ -1,8 +1,16 @@
-libart-lgpl (2.3.20-3) UNRELEASED; urgency=low
-
+libart-lgpl (2.3.21-1) unstable; urgency=low
+
+ [ Loic Minier ]
* Properly anchor package name regexp.
- -- Loic Minier <lool at dooz.org> Thu, 26 Jun 2008 20:49:27 +0200
+ [ Sebastian Dröge ]
+ * New upstream bugfix release:
+ + debian/control.in:
+ - Update Standards-Version and build-depend on autotools-dev.
+ + debian/patches/70_relibtoolize.patch:
+ - Regenerated for the new version.
+
+ -- Sebastian Dröge <slomo at debian.org> Sun, 25 Apr 2010 11:35:30 +0200
libart-lgpl (2.3.20-2) unstable; urgency=low
Modified: desktop/unstable/libart-lgpl/debian/control
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libart-lgpl/debian/control?rev=24013&op=diff
==============================================================================
--- desktop/unstable/libart-lgpl/debian/control [utf-8] (original)
+++ desktop/unstable/libart-lgpl/debian/control [utf-8] Sun Apr 25 09:36:48 2010
@@ -1,14 +1,19 @@
+# This file is autogenerated. DO NOT EDIT!
+#
+# Modifications should be made to debian/control.in instead.
+# This file is regenerated automatically in the clean target.
+
Source: libart-lgpl
Section: devel
Priority: optional
Maintainer: Josselin Mouette <joss at debian.org>
Uploaders: Debian GNOME Maintainers <pkg-gnome-maintainers at lists.alioth.debian.org>, Loic Minier <lool at dooz.org>, Sebastian Dröge <slomo at debian.org>, Sebastien Bacher <seb128 at debian.org>
-Standards-Version: 3.7.3
+Standards-Version: 3.8.4
Build-Depends: debhelper (>= 5),
gnome-pkg-tools (>= 0.7),
cdbs,
- dpkg-dev (>= 1.13.19)
-
+ dpkg-dev (>= 1.13.19),
+ autotools-dev
Package: libart-2.0-2
Architecture: any
Section: libs
Modified: desktop/unstable/libart-lgpl/debian/control.in
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libart-lgpl/debian/control.in?rev=24013&op=diff
==============================================================================
--- desktop/unstable/libart-lgpl/debian/control.in [utf-8] (original)
+++ desktop/unstable/libart-lgpl/debian/control.in [utf-8] Sun Apr 25 09:36:48 2010
@@ -3,12 +3,12 @@
Priority: optional
Maintainer: Josselin Mouette <joss at debian.org>
Uploaders: @GNOME_TEAM@
-Standards-Version: 3.7.3
+Standards-Version: 3.8.4
Build-Depends: debhelper (>= 5),
gnome-pkg-tools (>= 0.7),
cdbs,
- dpkg-dev (>= 1.13.19)
-
+ dpkg-dev (>= 1.13.19),
+ autotools-dev
Package: libart-2.0-2
Architecture: any
Section: libs
Modified: desktop/unstable/libart-lgpl/debian/patches/70_relibtoolize.patch
URL: http://svn.debian.org/wsvn/pkg-gnome/desktop/unstable/libart-lgpl/debian/patches/70_relibtoolize.patch?rev=24013&op=diff
==============================================================================
--- desktop/unstable/libart-lgpl/debian/patches/70_relibtoolize.patch [utf-8] (original)
+++ desktop/unstable/libart-lgpl/debian/patches/70_relibtoolize.patch [utf-8] Sun Apr 25 09:36:48 2010
@@ -1,63 +1,5382 @@
-diff -x'*config.sub' -x'*config.guess' -Naur libart-lgpl-2.3.20.old/aclocal.m4 libart-lgpl-2.3.20/aclocal.m4
---- libart-lgpl-2.3.20.old/aclocal.m4 2008-01-30 10:00:40.000000000 +0100
-+++ libart-lgpl-2.3.20/aclocal.m4 2008-01-30 13:42:03.000000000 +0100
-@@ -1,7 +1,7 @@
--# generated automatically by aclocal 1.10 -*- Autoconf -*-
-+# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+diff '-x*config.guess' '-x*config.sub' -Naur libart-lgpl-2.3.21.old/aclocal.m4 libart-lgpl-2.3.21/aclocal.m4
+--- libart-lgpl-2.3.21.old/aclocal.m4 2010-04-01 15:39:43.000000000 +0200
++++ libart-lgpl-2.3.21/aclocal.m4 2010-04-25 11:34:15.560352998 +0200
+@@ -1,4 +1,4 @@
+-# generated automatically by aclocal 1.11 -*- Autoconf -*-
++# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
--# 2005, 2006 Free Software Foundation, Inc.
-+# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
- # This file is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -11,14 +11,17 @@
- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- # PARTICULAR PURPOSE.
-
--m4_if(m4_PACKAGE_VERSION, [2.61],,
--[m4_fatal([this file was generated for autoconf 2.61.
--You have another version of autoconf. If you want to use that,
--you should regenerate the build system entirely.], [63])])
-+m4_ifndef([AC_AUTOCONF_VERSION],
-+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-+m4_if(AC_AUTOCONF_VERSION, [2.61],,
-+[m4_warning([this file was generated for autoconf 2.61.
-+You have another version of autoconf. It may work, but is not guaranteed to.
-+If you have problems, you may need to regenerate the build system entirely.
-+To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
- # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
--# serial 51 AC_PROG_LIBTOOL
-+# serial 51 Debian 1.5.24-2 AC_PROG_LIBTOOL
-
-
- # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-@@ -570,7 +573,6 @@
- esac
+ # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+@@ -13,3321 +13,2351 @@
+
+ m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+-[m4_warning([this file was generated for autoconf 2.63.
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
++[m4_warning([this file was generated for autoconf 2.65.
+ You have another version of autoconf. It may work, but is not guaranteed to.
+ If you have problems, you may need to regenerate the build system entirely.
+ To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+ #
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+-
+-# AM_AUTOMAKE_VERSION(VERSION)
+-# ----------------------------
+-# Automake X.Y traces this macro to ensure aclocal.m4 has been
+-# generated from the m4 files accompanying Automake X.Y.
+-# (This private macro should not be called outside this file.)
+-AC_DEFUN([AM_AUTOMAKE_VERSION],
+-[am__api_version='1.11'
+-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+-dnl require some minimum version. Point them to the right macro.
+-m4_if([$1], [1.11], [],
+- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+-])
+-
+-# _AM_AUTOCONF_VERSION(VERSION)
+-# -----------------------------
+-# aclocal traces this macro to find the Autoconf version.
+-# This is a private macro too. Using m4_define simplifies
+-# the logic in aclocal, which can simply ignore this definition.
+-m4_define([_AM_AUTOCONF_VERSION], [])
+-
+-# AM_SET_CURRENT_AUTOMAKE_VERSION
+-# -------------------------------
+-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+-[AM_AUTOMAKE_VERSION([1.11])dnl
+-m4_ifndef([AC_AUTOCONF_VERSION],
+- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+-
+-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+-
+-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
+ #
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
+
+-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++m4_define([_LT_COPYING], [dnl
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
+ #
+-# Of course, Automake must honor this variable whenever it calls a
+-# tool from the auxiliary directory. The problem is that $srcdir (and
+-# therefore $ac_aux_dir as well) can be either absolute or relative,
+-# depending on how configure is run. This is pretty annoying, since
+-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+-# source directory, any form will work fine, but in subdirectories a
+-# relative path needs to be adjusted first.
++# This file is part of GNU Libtool.
+ #
+-# $ac_aux_dir/missing
+-# fails when called from a subdirectory if $ac_aux_dir is relative
+-# $top_srcdir/$ac_aux_dir/missing
+-# fails if $ac_aux_dir is absolute,
+-# fails when called from a subdirectory in a VPATH build with
+-# a relative $ac_aux_dir
++# GNU Libtool is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
+ #
+-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+-# are both prefixed by $srcdir. In an in-source build this is usually
+-# harmless because $srcdir is `.', but things will broke when you
+-# start a VPATH build or use an absolute $srcdir.
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
+ #
+-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+-# and then we would define $MISSING as
+-# MISSING="\${SHELL} $am_aux_dir/missing"
+-# This will work as long as MISSING is not called from configure, because
+-# unfortunately $(top_srcdir) has no meaning in configure.
+-# However there are other variables, like CC, which are often used in
+-# configure, and could therefore not use this "fixed" $ac_aux_dir.
++# GNU Libtool is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
+ #
+-# Another solution, used here, is to always expand $ac_aux_dir to an
+-# absolute PATH. The drawback is that using absolute paths prevent a
+-# configured tree to be moved without reconfiguration.
+-
+-AC_DEFUN([AM_AUX_DIR_EXPAND],
+-[dnl Rely on autoconf to set up CDPATH properly.
+-AC_PREREQ([2.50])dnl
+-# expand $ac_aux_dir to an absolute path
+-am_aux_dir=`cd $ac_aux_dir && pwd`
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING. If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
++# obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ])
+
+-# AM_CONDITIONAL -*- Autoconf -*-
++# serial 56 LT_INIT
+
+-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# serial 9
++# LT_PREREQ(VERSION)
++# ------------------
++# Complain and exit if this libtool version is less that VERSION.
++m4_defun([LT_PREREQ],
++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
++ [m4_default([$3],
++ [m4_fatal([Libtool version $1 or higher is required],
++ 63)])],
++ [$2])])
+
+-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+-# -------------------------------------
+-# Define a conditional.
+-AC_DEFUN([AM_CONDITIONAL],
+-[AC_PREREQ(2.52)dnl
+- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+-AC_SUBST([$1_TRUE])dnl
+-AC_SUBST([$1_FALSE])dnl
+-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+-m4_define([_AM_COND_VALUE_$1], [$2])dnl
+-if $2; then
+- $1_TRUE=
+- $1_FALSE='#'
+-else
+- $1_TRUE='#'
+- $1_FALSE=
+-fi
+-AC_CONFIG_COMMANDS_PRE(
+-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+- AC_MSG_ERROR([[conditional "$1" was never defined.
+-Usually this means the macro was only invoked conditionally.]])
+-fi])])
+
+-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# _LT_CHECK_BUILDDIR
++# ------------------
++# Complain if the absolute build directory name contains unusual characters
++m4_defun([_LT_CHECK_BUILDDIR],
++[case `pwd` in
++ *\ * | *\ *)
++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
++esac
++])
+
+-# serial 10
+
+-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+-# written in clear, in which case automake, when reading aclocal.m4,
+-# will think it sees a *use*, and therefore will trigger all it's
+-# C support machinery. Also note that it means that autoscan, seeing
+-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++# LT_INIT([OPTIONS])
++# ------------------
++AC_DEFUN([LT_INIT],
++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_BEFORE([$0], [LT_LANG])dnl
++AC_BEFORE([$0], [LT_OUTPUT])dnl
++AC_BEFORE([$0], [LTDL_INIT])dnl
++m4_require([_LT_CHECK_BUILDDIR])dnl
+
++dnl Autoconf doesn't catch unexpanded LT_ macros by default:
++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
++dnl unless we require an AC_DEFUNed macro:
++AC_REQUIRE([LTOPTIONS_VERSION])dnl
++AC_REQUIRE([LTSUGAR_VERSION])dnl
++AC_REQUIRE([LTVERSION_VERSION])dnl
++AC_REQUIRE([LTOBSOLETE_VERSION])dnl
++m4_require([_LT_PROG_LTMAIN])dnl
+
+-# _AM_DEPENDENCIES(NAME)
+-# ----------------------
+-# See how the compiler implements dependency checking.
+-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+-# We try a few techniques and use that to set a single cache variable.
+-#
+-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+-# dependency, and given that the user is not expected to run this macro,
+-# just rely on AC_PROG_CC.
+-AC_DEFUN([_AM_DEPENDENCIES],
+-[AC_REQUIRE([AM_SET_DEPDIR])dnl
+-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+-AC_REQUIRE([AM_DEP_TRACK])dnl
++dnl Parse OPTIONS
++_LT_SET_OPTIONS([$0], [$1])
+
+-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+- [$1], CXX, [depcc="$CXX" am_compiler_list=],
+- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+- [$1], UPC, [depcc="$UPC" am_compiler_list=],
+- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+- [depcc="$$1" am_compiler_list=])
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ltmain"
+
+-AC_CACHE_CHECK([dependency style of $depcc],
+- [am_cv_$1_dependencies_compiler_type],
+-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+- # We make a subdir and do the tests there. Otherwise we can end up
+- # making bogus files that we don't know about and never remove. For
+- # instance it was reported that on HP-UX the gcc test will end up
+- # making a dummy file named `D' -- because `-MD' means `put the output
+- # in D'.
+- mkdir conftest.dir
+- # Copy depcomp to subdir because otherwise we won't find it if we're
+- # using a relative directory.
+- cp "$am_depcomp" conftest.dir
+- cd conftest.dir
+- # We will build objects and dependencies in a subdirectory because
+- # it helps to detect inapplicable dependency modes. For instance
+- # both Tru64's cc and ICC support -MD to output dependencies as a
+- # side effect of compilation, but ICC will put the dependencies in
+- # the current directory while Tru64 will put them in the object
+- # directory.
+- mkdir sub
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
+
+- am_cv_$1_dependencies_compiler_type=none
+- if test "$am_compiler_list" = ""; then
+- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+- fi
+- am__universal=false
+- m4_case([$1], [CC],
+- [case " $depcc " in #(
+- *\ -arch\ *\ -arch\ *) am__universal=true ;;
+- esac],
+- [CXX],
+- [case " $depcc " in #(
+- *\ -arch\ *\ -arch\ *) am__universal=true ;;
+- esac])
++_LT_SETUP
+
+- for depmode in $am_compiler_list; do
+- # Setup a source with many dependencies, because some compilers
+- # like to wrap large dependency lists on column 80 (with \), and
+- # we should not choose a depcomp mode which is confused by this.
+- #
+- # We need to recreate these files for each test, as the compiler may
+- # overwrite some of them when testing with obscure command lines.
+- # This happens at least with the AIX C compiler.
+- : > sub/conftest.c
+- for i in 1 2 3 4 5 6; do
+- echo '#include "conftst'$i'.h"' >> sub/conftest.c
+- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+- # Solaris 8's {/usr,}/bin/sh.
+- touch sub/conftst$i.h
+- done
+- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++# Only expand once:
++m4_define([LT_INIT])
++])# LT_INIT
+
+- # We check with `-c' and `-o' for the sake of the "dashmstdout"
+- # mode. It turns out that the SunPro C++ compiler does not properly
+- # handle `-M -o', and we need to detect this. Also, some Intel
+- # versions had trouble with output in subdirs
+- am__obj=sub/conftest.${OBJEXT-o}
+- am__minus_obj="-o $am__obj"
+- case $depmode in
+- gcc)
+- # This depmode causes a compiler race in universal mode.
+- test "$am__universal" = false || continue
+- ;;
+- nosideeffect)
+- # after this tag, mechanisms are not by side-effect, so they'll
+- # only be used when explicitly requested
+- if test "x$enable_dependency_tracking" = xyes; then
+- continue
+- else
+- break
+- fi
+- ;;
+- msvisualcpp | msvcmsys)
+- # This compiler won't grok `-c -o', but also, the minuso test has
+- # not run yet. These depmodes are late enough in the game, and
+- # so weak that their functioning should not be impacted.
+- am__obj=conftest.${OBJEXT-o}
+- am__minus_obj=
+- ;;
+- none) break ;;
+- esac
+- if depmode=$depmode \
+- source=sub/conftest.c object=$am__obj \
+- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+- >/dev/null 2>conftest.err &&
+- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+- # icc doesn't choke on unknown options, it will just issue warnings
+- # or remarks (even with -Werror). So we grep stderr for any message
+- # that says an option was ignored or not supported.
+- # When given -MP, icc 7.0 and 7.1 complain thusly:
+- # icc: Command line warning: ignoring option '-M'; no argument required
+- # The diagnosis changed in icc 8.0:
+- # icc: Command line remark: option '-MP' not supported
+- if (grep 'ignoring option' conftest.err ||
+- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+- am_cv_$1_dependencies_compiler_type=$depmode
+- break
+- fi
+- fi
+- done
++# Old names:
++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
++dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+- cd ..
+- rm -rf conftest.dir
+-else
+- am_cv_$1_dependencies_compiler_type=none
+-fi
+-])
+-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+-AM_CONDITIONAL([am__fastdep$1], [
+- test "x$enable_dependency_tracking" != xno \
+- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
++m4_defun([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++ case $cc_temp in
++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+ ])
+
+
+-# AM_SET_DEPDIR
+-# -------------
+-# Choose a directory name for dependency files.
+-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+-AC_DEFUN([AM_SET_DEPDIR],
+-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+-])
++# _LT_FILEUTILS_DEFAULTS
++# ----------------------
++# It is okay to use these file commands and assume they have been set
++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
++m4_defun([_LT_FILEUTILS_DEFAULTS],
++[: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++])# _LT_FILEUTILS_DEFAULTS
+
+
+-# AM_DEP_TRACK
+-# ------------
+-AC_DEFUN([AM_DEP_TRACK],
+-[AC_ARG_ENABLE(dependency-tracking,
+-[ --disable-dependency-tracking speeds up one-time build
+- --enable-dependency-tracking do not reject slow dependency extractors])
+-if test "x$enable_dependency_tracking" != xno; then
+- am_depcomp="$ac_aux_dir/depcomp"
+- AMDEPBACKSLASH='\'
++# _LT_SETUP
++# ---------
++m4_defun([_LT_SETUP],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++_LT_DECL([], [host_alias], [0], [The host system])dnl
++_LT_DECL([], [host], [0])dnl
++_LT_DECL([], [host_os], [0])dnl
++dnl
++_LT_DECL([], [build_alias], [0], [The build system])dnl
++_LT_DECL([], [build], [0])dnl
++_LT_DECL([], [build_os], [0])dnl
++dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++dnl
++AC_REQUIRE([AC_PROG_LN_S])dnl
++test -z "$LN_S" && LN_S="ln -s"
++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
++dnl
++AC_REQUIRE([LT_CMD_MAX_LEN])dnl
++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
++dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_CMD_RELOAD])dnl
++m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CMD_OLD_ARCHIVE])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++
++_LT_CONFIG_LIBTOOL_INIT([
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes INIT.
++if test -n "\${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
+ fi
+-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+-AC_SUBST([AMDEPBACKSLASH])dnl
+-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+ ])
++if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
+
+-# Generate code to set up dependency tracking. -*- Autoconf -*-
++_LT_CHECK_OBJDIR
+
+-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++m4_require([_LT_TAG_COMPILER])dnl
++_LT_PROG_ECHO_BACKSLASH
+
+-#serial 5
++case $host_os in
++aix3*)
++ # AIX sometimes has problems with the GCC collect2 program. For some
++ # reason, if we set the COLLECT_NAMES environment variable, the problems
++ # vanish in a puff of smoke.
++ if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++ fi
++ ;;
++esac
+
+-# _AM_OUTPUT_DEPENDENCY_COMMANDS
+-# ------------------------------
+-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+-[{
+- # Autoconf 2.62 quotes --file arguments for eval, but not when files
+- # are listed without --file. Let's play safe and only enable the eval
+- # if we detect the quoting.
+- case $CONFIG_FILES in
+- *\'*) eval set x "$CONFIG_FILES" ;;
+- *) set x $CONFIG_FILES ;;
+- esac
+- shift
+- for mf
+- do
+- # Strip MF so we end up with the name of the file.
+- mf=`echo "$mf" | sed -e 's/:.*$//'`
+- # Check whether this is an Automake generated Makefile or not.
+- # We used to match only the files named `Makefile.in', but
+- # some people rename them; so instead we look at the file content.
+- # Grep'ing the first line is not enough: some people post-process
+- # each Makefile.in and add a new line on top of each file to say so.
+- # Grep'ing the whole file is not good either: AIX grep has a line
+- # limit of 2048, but all sed's we know have understand at least 4000.
+- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+- dirpart=`AS_DIRNAME("$mf")`
+- else
+- continue
+- fi
+- # Extract the definition of DEPDIR, am__include, and am__quote
+- # from the Makefile without running `make'.
+- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+- test -z "$DEPDIR" && continue
+- am__include=`sed -n 's/^am__include = //p' < "$mf"`
+- test -z "am__include" && continue
+- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+- # When using ansi2knr, U may be empty or an underscore; expand it
+- U=`sed -n 's/^U = //p' < "$mf"`
+- # Find all dependency output files, they are included files with
+- # $(DEPDIR) in their names. We invoke sed twice because it is the
+- # simplest approach to changing $(DEPDIR) to its actual value in the
+- # expansion.
+- for file in `sed -n "
+- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+- # Make sure the directory exists.
+- test -f "$dirpart/$file" && continue
+- fdir=`AS_DIRNAME(["$file"])`
+- AS_MKDIR_P([$dirpart/$fdir])
+- # echo "creating $dirpart/$file"
+- echo '# dummy' > "$dirpart/$file"
+- done
+- done
+-}
+-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+-# AM_OUTPUT_DEPENDENCY_COMMANDS
+-# -----------------------------
+-# This macro should only be invoked once -- use via AC_REQUIRE.
+-#
+-# This code is only required when automatic dependency tracking
+-# is enabled. FIXME. This creates each `.P' file that we will
+-# need in order to bootstrap the dependency handling code.
+-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+-[AC_CONFIG_COMMANDS([depfiles],
+- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+-])
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+-# Do all the work for Automake. -*- Autoconf -*-
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
+
+-# serial 16
++# Global variables:
++ofile=libtool
++can_build_shared=yes
+
+-# This macro actually does too much. Some checks are only needed if
+-# your package does certain things. But this isn't really a big deal.
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
+
+-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+-# AM_INIT_AUTOMAKE([OPTIONS])
+-# -----------------------------------------------
+-# The call with PACKAGE and VERSION arguments is the old style
+-# call (pre autoconf-2.50), which is being phased out. PACKAGE
+-# and VERSION should now be passed to AC_INIT and removed from
+-# the call to AM_INIT_AUTOMAKE.
+-# We support both call styles for the transition. After
+-# the next Automake release, Autoconf can make the AC_INIT
+-# arguments mandatory, and then we can depend on a new Autoconf
+-# release and drop the old call support.
+-AC_DEFUN([AM_INIT_AUTOMAKE],
+-[AC_PREREQ([2.62])dnl
+-dnl Autoconf wants to disallow AM_ names. We explicitly allow
+-dnl the ones we care about.
+-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+-AC_REQUIRE([AC_PROG_INSTALL])dnl
+-if test "`cd $srcdir && pwd`" != "`pwd`"; then
+- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+- # is not polluted with repeated "-I."
+- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+- # test to see if srcdir already configured
+- if test -f $srcdir/config.status; then
+- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+- fi
+-fi
++with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+-# test whether we have cygpath
+-if test -z "$CYGPATH_W"; then
+- if (cygpath --version) >/dev/null 2>/dev/null; then
+- CYGPATH_W='cygpath -w'
+- else
+- CYGPATH_W=echo
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$LD" && LD=ld
++test -z "$ac_objext" && ac_objext=o
++
++_LT_CC_BASENAME([$compiler])
++
++# Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++case $deplibs_check_method in
++file_magic*)
++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++ _LT_PATH_MAGIC
+ fi
+-fi
+-AC_SUBST([CYGPATH_W])
++ ;;
++esac
+
+-# Define the identity of the package.
+-dnl Distinguish between old-style and new-style calls.
+-m4_ifval([$2],
+-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+- AC_SUBST([PACKAGE], [$1])dnl
+- AC_SUBST([VERSION], [$2])],
+-[_AM_SET_OPTIONS([$1])dnl
+-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++# Use C for the default configuration in the libtool script
++LT_SUPPORTED_TAG([CC])
++_LT_LANG_C_CONFIG
++_LT_LANG_DEFAULT_CONFIG
++_LT_CONFIG_COMMANDS
++])# _LT_SETUP
+
+-_AM_IF_OPTION([no-define],,
+-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+-# Some tools Automake needs.
+-AC_REQUIRE([AM_SANITY_CHECK])dnl
+-AC_REQUIRE([AC_ARG_PROGRAM])dnl
+-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+-AM_MISSING_PROG(AUTOCONF, autoconf)
+-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+-AM_MISSING_PROG(AUTOHEADER, autoheader)
+-AM_MISSING_PROG(MAKEINFO, makeinfo)
+-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+-# We need awk for the "check" target. The system "awk" is bad on
+-# some platforms.
+-AC_REQUIRE([AC_PROG_AWK])dnl
+-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+- [_AM_PROG_TAR([v7])])])
+-_AM_IF_OPTION([no-dependencies],,
+-[AC_PROVIDE_IFELSE([AC_PROG_CC],
+- [_AM_DEPENDENCIES(CC)],
+- [define([AC_PROG_CC],
+- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+-AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [_AM_DEPENDENCIES(CXX)],
+- [define([AC_PROG_CXX],
+- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+- [_AM_DEPENDENCIES(OBJC)],
+- [define([AC_PROG_OBJC],
+- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+-])
+-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+-AC_CONFIG_COMMANDS_PRE(dnl
+-[m4_provide_if([_AM_COMPILER_EXEEXT],
+- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+-])
++# _LT_PROG_LTMAIN
++# ---------------
++# Note that this code is called both from `configure', and `config.status'
++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
++# `config.status' has no value for ac_aux_dir unless we are using Automake,
++# so we pass a copy along to make sure it has a sensible value anyway.
++m4_defun([_LT_PROG_LTMAIN],
++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
++ltmain="$ac_aux_dir/ltmain.sh"
++])# _LT_PROG_LTMAIN
+
+-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+-dnl mangled by Autoconf and run in a shell conditional statement.
+-m4_define([_AC_COMPILER_EXEEXT],
+-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+-# When config.status generates a header, we must update the stamp-h file.
+-# This file resides in the same directory as the config header
+-# that is generated. The stamp files are numbered to have different names.
++# So that we can recreate a full libtool script including additional
++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
++# in macros and then make a single call at the end using the `libtool'
++# label.
+
+-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+-# loop where config.status creates the headers, so we can generate
+-# our stamp files there.
+-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+-[# Compute $1's index in $config_headers.
+-_am_arg=$1
+-_am_stamp_count=1
+-for _am_header in $config_headers :; do
+- case $_am_header in
+- $_am_arg | $_am_arg:* )
+- break ;;
+- * )
+- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+- esac
+-done
+-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
++# ----------------------------------------
++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL_INIT],
++[m4_ifval([$1],
++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
++ [$1
++])])])
+
+-# AM_PROG_INSTALL_SH
+-# ------------------
+-# Define $install_sh.
+-AC_DEFUN([AM_PROG_INSTALL_SH],
+-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+-if test x"${install_sh}" != xset; then
+- case $am_aux_dir in
+- *\ * | *\ *)
+- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+- *)
+- install_sh="\${SHELL} $am_aux_dir/install-sh"
+- esac
+-fi
+-AC_SUBST(install_sh)])
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# serial 2
++# _LT_CONFIG_LIBTOOL([COMMANDS])
++# ------------------------------
++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL],
++[m4_ifval([$1],
++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
++ [$1
++])])])
+
+-# Check whether the underlying file-system supports filenames
+-# with a leading dot. For instance MS-DOS doesn't.
+-AC_DEFUN([AM_SET_LEADING_DOT],
+-[rm -rf .tst 2>/dev/null
+-mkdir .tst 2>/dev/null
+-if test -d .tst; then
+- am__leading_dot=.
+-else
+- am__leading_dot=_
+-fi
+-rmdir .tst 2>/dev/null
+-AC_SUBST([am__leading_dot])])
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+-# From Jim Meyering
+
+-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
++# -----------------------------------------------------
++m4_defun([_LT_CONFIG_SAVE_COMMANDS],
++[_LT_CONFIG_LIBTOOL([$1])
++_LT_CONFIG_LIBTOOL_INIT([$2])
++])
+
+-# serial 5
+
+-# AM_MAINTAINER_MODE([DEFAULT-MODE])
+-# ----------------------------------
+-# Control maintainer-specific portions of Makefiles.
+-# Default is to disable them, unless `enable' is passed literally.
+-# For symmetry, `disable' may be passed as well. Anyway, the user
+-# can override the default with the --enable/--disable switch.
+-AC_DEFUN([AM_MAINTAINER_MODE],
+-[m4_case(m4_default([$1], [disable]),
+- [enable], [m4_define([am_maintainer_other], [disable])],
+- [disable], [m4_define([am_maintainer_other], [enable])],
+- [m4_define([am_maintainer_other], [enable])
+- m4_warn([syntax], [unexpected argument to AM@&t at _MAINTAINER_MODE: $1])])
+-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+- AC_ARG_ENABLE([maintainer-mode],
+-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
+- (and sometimes confusing) to the casual installer],
+- [USE_MAINTAINER_MODE=$enableval],
+- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+- MAINT=$MAINTAINER_MODE_TRUE
+- AC_SUBST([MAINT])dnl
+-]
+-)
++# _LT_FORMAT_COMMENT([COMMENT])
++# -----------------------------
++# Add leading comment marks to the start of each line, and a trailing
++# full-stop to the whole comment if one is not present already.
++m4_define([_LT_FORMAT_COMMENT],
++[m4_ifval([$1], [
++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
++)])
+
+-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+-# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# serial 4
+
+-# AM_MAKE_INCLUDE()
+-# -----------------
+-# Check to see how make treats includes.
+-AC_DEFUN([AM_MAKE_INCLUDE],
+-[am_make=${MAKE-make}
+-cat > confinc << 'END'
+-am__doit:
+- @echo this is the am__doit target
+-.PHONY: am__doit
+-END
+-# If we don't find an include directive, just comment out the code.
+-AC_MSG_CHECKING([for style of include used by $am_make])
+-am__include="#"
+-am__quote=
+-_am_result=none
+-# First try GNU make style include.
+-echo "include confinc" > confmf
+-# Ignore all kinds of additional output from `make'.
+-case `$am_make -s -f confmf 2> /dev/null` in #(
+-*the\ am__doit\ target*)
+- am__include=include
+- am__quote=
+- _am_result=GNU
+- ;;
+-esac
+-# Now try BSD make style include.
+-if test "$am__include" = "#"; then
+- echo '.include "confinc"' > confmf
+- case `$am_make -s -f confmf 2> /dev/null` in #(
+- *the\ am__doit\ target*)
+- am__include=.include
+- am__quote="\""
+- _am_result=BSD
+- ;;
+- esac
+-fi
+-AC_SUBST([am__include])
+-AC_SUBST([am__quote])
+-AC_MSG_RESULT([$_am_result])
+-rm -f confinc confmf
++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
++# -------------------------------------------------------------------
++# CONFIGNAME is the name given to the value in the libtool script.
++# VARNAME is the (base) name used in the configure script.
++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
++# VARNAME. Any other value will be used directly.
++m4_define([_LT_DECL],
++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
++ [m4_ifval([$1], [$1], [$2])])
++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
++ m4_ifval([$4],
++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
++ lt_dict_add_subkey([lt_decl_dict], [$2],
++ [tagged?], [m4_ifval([$5], [yes], [no])])])
+ ])
+
+-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+-# Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
++# --------------------------------------------------------
++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+-# serial 6
+
+-# AM_MISSING_PROG(NAME, PROGRAM)
+-# ------------------------------
+-AC_DEFUN([AM_MISSING_PROG],
+-[AC_REQUIRE([AM_MISSING_HAS_RUN])
+-$1=${$1-"${am_missing_run}$2"}
+-AC_SUBST($1)])
++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_tag_varnames],
++[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+-# AM_MISSING_HAS_RUN
+-# ------------------
+-# Define MISSING if not defined so far and test if it supports --run.
+-# If it does, set am_missing_run to use it, otherwise, to nothing.
+-AC_DEFUN([AM_MISSING_HAS_RUN],
+-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+-AC_REQUIRE_AUX_FILE([missing])dnl
+-if test x"${MISSING+set}" != xset; then
+- case $am_aux_dir in
+- *\ * | *\ *)
+- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+- *)
+- MISSING="\${SHELL} $am_aux_dir/missing" ;;
+- esac
+-fi
+-# Use eval to expand $SHELL
+-if eval "$MISSING --run true"; then
+- am_missing_run="$MISSING --run "
+-else
+- am_missing_run=
+- AC_MSG_WARN([`missing' script is too old or missing])
+-fi
++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
++# ---------------------------------------------------------
++m4_define([_lt_decl_filter],
++[m4_case([$#],
++ [0], [m4_fatal([$0: too few arguments: $#])],
++ [1], [m4_fatal([$0: too few arguments: $#: $1])],
++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+ ])
+
+-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# AM_PROG_MKDIR_P
+-# ---------------
+-# Check for `mkdir -p'.
+-AC_DEFUN([AM_PROG_MKDIR_P],
+-[AC_PREREQ([2.60])dnl
+-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+-dnl while keeping a definition of mkdir_p for backward compatibility.
+-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+-dnl Makefile.ins that do not define MKDIR_P, so we do our own
+-dnl adjustment using top_builddir (which is defined more often than
+-dnl MKDIR_P).
+-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+-case $mkdir_p in
+- [[\\/$]]* | ?:[[\\/]]*) ;;
+- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+-esac
+-])
++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
++# --------------------------------------------------
++m4_define([lt_decl_quote_varnames],
++[_lt_decl_filter([value], [1], $@)])
+
+-# Helper functions for option handling. -*- Autoconf -*-
+
+-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_dquote_varnames],
++[_lt_decl_filter([value], [2], $@)])
+
+-# serial 4
+
+-# _AM_MANGLE_OPTION(NAME)
+-# -----------------------
+-AC_DEFUN([_AM_MANGLE_OPTION],
+-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_varnames_tagged],
++[m4_assert([$# <= 2])dnl
++_$0(m4_quote(m4_default([$1], [[, ]])),
++ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
++ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
++m4_define([_lt_decl_varnames_tagged],
++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+-# _AM_SET_OPTION(NAME)
+-# ------------------------------
+-# Set option NAME. Presently that only means defining a flag for this option.
+-AC_DEFUN([_AM_SET_OPTION],
+-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+-# _AM_SET_OPTIONS(OPTIONS)
+-# ----------------------------------
+-# OPTIONS is a space-separated list of Automake options.
+-AC_DEFUN([_AM_SET_OPTIONS],
+-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_all_varnames],
++[_$0(m4_quote(m4_default([$1], [[, ]])),
++ m4_if([$2], [],
++ m4_quote(lt_decl_varnames),
++ m4_quote(m4_shift($@))))[]dnl
++])
++m4_define([_lt_decl_all_varnames],
++[lt_join($@, lt_decl_varnames_tagged([$1],
++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
++])
+
+-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+-# -------------------------------------------
+-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+-AC_DEFUN([_AM_IF_OPTION],
+-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+-# Check to make sure that the build environment is sane. -*- Autoconf -*-
++# _LT_CONFIG_STATUS_DECLARE([VARNAME])
++# ------------------------------------
++# Quote a variable value, and forward it to `config.status' so that its
++# declaration there will have the same value as in `configure'. VARNAME
++# must have a single quote delimited value for this to work.
++m4_define([_LT_CONFIG_STATUS_DECLARE],
++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+-# Free Software Foundation, Inc.
++
++# _LT_CONFIG_STATUS_DECLARATIONS
++# ------------------------------
++# We delimit libtool config variables with single quotes, so when
++# we write them to config.status, we have to be sure to quote all
++# embedded single quotes properly. In configure, this macro expands
++# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+ #
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+-# serial 5
+
+-# AM_SANITY_CHECK
+-# ---------------
+-AC_DEFUN([AM_SANITY_CHECK],
+-[AC_MSG_CHECKING([whether build environment is sane])
+-# Just in case
+-sleep 1
+-echo timestamp > conftest.file
+-# Reject unsafe characters in $srcdir or the absolute working directory
+-# name. Accept space and tab only in the latter.
+-am_lf='
+-'
+-case `pwd` in
+- *[[\\\"\#\$\&\'\`$am_lf]]*)
+- AC_MSG_ERROR([unsafe absolute working directory name]);;
+-esac
+-case $srcdir in
+- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+-esac
++# _LT_LIBTOOL_TAGS
++# ----------------
++# Output comment and list of tags supported by the script
++m4_defun([_LT_LIBTOOL_TAGS],
++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
++available_tags="_LT_TAGS"dnl
++])
+
+-# Do `set' in a subshell so we don't clobber the current shell's
+-# arguments. Must try -L first in case configure is actually a
+-# symlink; some systems play weird games with the mod time of symlinks
+-# (eg FreeBSD returns the mod time of the symlink's containing
+-# directory).
+-if (
+- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+- if test "$[*]" = "X"; then
+- # -L didn't work.
+- set X `ls -t "$srcdir/configure" conftest.file`
+- fi
+- rm -f conftest.file
+- if test "$[*]" != "X $srcdir/configure conftest.file" \
+- && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+- # If neither matched, then we have a broken ls. This can happen
+- # if, for instance, CONFIG_SHELL is bash and it inherits a
+- # broken ls alias from the environment. This has actually
+- # happened. Such a system could not be considered "sane".
+- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+-alias in your environment])
+- fi
++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
++# -----------------------------------
++# Extract the dictionary values for VARNAME (optionally with TAG) and
++# expand to a commented shell variable setting:
++#
++# # Some comment about what VAR is for.
++# visible_name=$lt_internal_name
++m4_define([_LT_LIBTOOL_DECLARE],
++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
++ [description])))[]dnl
++m4_pushdef([_libtool_name],
++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
++ [0], [_libtool_name=[$]$1],
++ [1], [_libtool_name=$lt_[]$1],
++ [2], [_libtool_name=$lt_[]$1],
++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
++])
+
+- test "$[2]" = conftest.file
+- )
+-then
+- # Ok.
+- :
+-else
+- AC_MSG_ERROR([newly created file is older than distributed files!
+-Check your system clock])
+-fi
+-AC_MSG_RESULT(yes)])
+
+-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# _LT_LIBTOOL_CONFIG_VARS
++# -----------------------
++# Produce commented declarations of non-tagged libtool config variables
++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
++# section) are produced by _LT_LIBTOOL_TAG_VARS.
++m4_defun([_LT_LIBTOOL_CONFIG_VARS],
++[m4_foreach([_lt_var],
++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+-# AM_PROG_INSTALL_STRIP
+-# ---------------------
+-# One issue with vendor `install' (even GNU) is that you can't
+-# specify the program used to strip binaries. This is especially
+-# annoying in cross-compiling environments, where the build's strip
+-# is unlikely to handle the host's binaries.
+-# Fortunately install-sh will honor a STRIPPROG variable, so we
+-# always use install-sh in `make install-strip', and initialize
+-# STRIPPROG with the value of the STRIP variable (set by the user).
+-AC_DEFUN([AM_PROG_INSTALL_STRIP],
+-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+-# Installed binaries are usually stripped using `strip' when the user
+-# run `make install-strip'. However `strip' might not be the right
+-# tool to use in cross-compilation environments, therefore Automake
+-# will honor the `STRIP' environment variable to overrule this program.
+-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+-if test "$cross_compiling" != no; then
+- AC_CHECK_TOOL([STRIP], [strip], :)
+-fi
+-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+-AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
++# _LT_LIBTOOL_TAG_VARS(TAG)
++# -------------------------
++m4_define([_LT_LIBTOOL_TAG_VARS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+-# serial 2
+
+-# _AM_SUBST_NOTMAKE(VARIABLE)
+-# ---------------------------
+-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+-# This macro is traced by Automake.
+-AC_DEFUN([_AM_SUBST_NOTMAKE])
++# _LT_TAGVAR(VARNAME, [TAGNAME])
++# ------------------------------
++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+-# AM_SUBST_NOTMAKE(VARIABLE)
+-# ---------------------------
+-# Public sister of _AM_SUBST_NOTMAKE.
+-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+-# Check how to create a tarball. -*- Autoconf -*-
++# _LT_CONFIG_COMMANDS
++# -------------------
++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
++# variables for single and double quote escaping we saved from calls
++# to _LT_DECL, we can put quote escaped variables declarations
++# into `config.status', and then the shell code to quote escape them in
++# for loops in `config.status'. Finally, any additional code accumulated
++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
++m4_defun([_LT_CONFIG_COMMANDS],
++[AC_PROVIDE_IFELSE([LT_OUTPUT],
++ dnl If the libtool generation code has been placed in $CONFIG_LT,
++ dnl instead of duplicating it all over again into config.status,
++ dnl then we will have config.status run $CONFIG_LT later, so it
++ dnl needs to know what name is stored there:
++ [AC_CONFIG_COMMANDS([libtool],
++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
++ dnl If the libtool generation code is destined for config.status,
++ dnl expand the accumulated commands and init code now:
++ [AC_CONFIG_COMMANDS([libtool],
++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
++])#_LT_CONFIG_COMMANDS
+
+-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+-#
+-# This file is free software; the Free Software Foundation
+-# gives unlimited permission to copy and/or distribute it,
+-# with or without modifications, as long as this notice is preserved.
+
+-# serial 2
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
++[
+
+-# _AM_PROG_TAR(FORMAT)
+-# --------------------
+-# Check how to create a tarball in format FORMAT.
+-# FORMAT should be one of `v7', `ustar', or `pax'.
+-#
+-# Substitute a variable $(am__tar) that is a command
+-# writing to stdout a FORMAT-tarball containing the directory
+-# $tardir.
+-# tardir=directory && $(am__tar) > result.tar
+-#
+-# Substitute a variable $(am__untar) that extract such
+-# a tarball read from stdin.
+-# $(am__untar) < result.tar
+-AC_DEFUN([_AM_PROG_TAR],
+-[# Always define AMTAR for backward compatibility.
+-AM_MISSING_PROG([AMTAR], [tar])
+-m4_if([$1], [v7],
+- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+- [m4_case([$1], [ustar],, [pax],,
+- [m4_fatal([Unknown tar format])])
+-AC_MSG_CHECKING([how to create a $1 tar archive])
+-# Loop over all known methods to create a tar archive until one works.
+-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+-# Do not fold the above two line into one, because Tru64 sh and
+-# Solaris sh will not grok spaces in the rhs of `-'.
+-for _am_tool in $_am_tools
+-do
+- case $_am_tool in
+- gnutar)
+- for _am_tar in tar gnutar gtar;
+- do
+- AM_RUN_LOG([$_am_tar --version]) && break
+- done
+- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+- am__untar="$_am_tar -xf -"
+- ;;
+- plaintar)
+- # Must skip GNU tar: if it does not support --format= it doesn't create
+- # ustar tarball either.
+- (tar --version) >/dev/null 2>&1 && continue
+- am__tar='tar chf - "$$tardir"'
+- am__tar_='tar chf - "$tardir"'
+- am__untar='tar xf -'
+- ;;
+- pax)
+- am__tar='pax -L -x $1 -w "$$tardir"'
+- am__tar_='pax -L -x $1 -w "$tardir"'
+- am__untar='pax -r'
+- ;;
+- cpio)
+- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+- am__untar='cpio -i -H $1 -d'
+- ;;
+- none)
+- am__tar=false
+- am__tar_=false
+- am__untar=false
+- ;;
+- esac
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+- # If the value was cached, stop now. We just wanted to have am__tar
+- # and am__untar set.
+- test -n "${am_cv_prog_tar_$1}" && break
++sed_quote_subst='$sed_quote_subst'
++double_quote_subst='$double_quote_subst'
++delay_variable_subst='$delay_variable_subst'
++_LT_CONFIG_STATUS_DECLARATIONS
++LTCC='$LTCC'
++LTCFLAGS='$LTCFLAGS'
++compiler='$compiler_DEFAULT'
+
+- # tar/untar a dummy directory, and stop if the command works
+- rm -rf conftest.dir
+- mkdir conftest.dir
+- echo GrepMe > conftest.dir/file
+- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+- rm -rf conftest.dir
+- if test -s conftest.tar; then
+- AM_RUN_LOG([$am__untar <conftest.tar])
+- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+- fi
++# Quote evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_quote_varnames); do
++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ *[[\\\\\\\`\\"\\\$]]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++ ;;
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++ ;;
++ esac
+ done
+-rm -rf conftest.dir
+
+-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+-AC_SUBST([am__tar])
+-AC_SUBST([am__untar])
+-]) # _AM_PROG_TAR
++# Double-quote double-evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_dquote_varnames); do
++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ *[[\\\\\\\`\\"\\\$]]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++ ;;
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++ ;;
++ esac
++done
+
+-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gordon Matzigkeit, 1996
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
++# Fix-up fallback echo if it was mangled by the above quoting rules.
++case \$lt_ECHO in
++*'\\\[$]0 --fallback-echo"')dnl "
++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
++ ;;
++esac
+
+-m4_define([_LT_COPYING], [dnl
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gordon Matzigkeit, 1996
+-#
+-# This file is part of GNU Libtool.
+-#
+-# GNU Libtool is free software; you can redistribute it and/or
+-# modify it under the terms of the GNU General Public License as
+-# published by the Free Software Foundation; either version 2 of
+-# the License, or (at your option) any later version.
+-#
+-# As a special exception to the GNU General Public License,
+-# if you distribute this file as part of a program or library that
+-# is built using GNU Libtool, you may include this file under the
+-# same distribution terms that you use for the rest of that program.
+-#
+-# GNU Libtool is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with GNU Libtool; see the file COPYING. If not, a copy
+-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+-# obtained by writing to the Free Software Foundation, Inc.,
+-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++_LT_OUTPUT_LIBTOOL_INIT
+ ])
+
+-# serial 56 LT_INIT
+-
+-
+-# LT_PREREQ(VERSION)
+-# ------------------
+-# Complain and exit if this libtool version is less that VERSION.
+-m4_defun([LT_PREREQ],
+-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+- [m4_default([$3],
+- [m4_fatal([Libtool version $1 or higher is required],
+- 63)])],
+- [$2])])
+
++# LT_OUTPUT
++# ---------
++# This macro allows early generation of the libtool script (before
++# AC_OUTPUT is called), incase it is used in configure for compilation
++# tests.
++AC_DEFUN([LT_OUTPUT],
++[: ${CONFIG_LT=./config.lt}
++AC_MSG_NOTICE([creating $CONFIG_LT])
++cat >"$CONFIG_LT" <<_LTEOF
++#! $SHELL
++# Generated by $as_me.
++# Run this file to recreate a libtool stub with the current configuration.
+
+-# _LT_CHECK_BUILDDIR
+-# ------------------
+-# Complain if the absolute build directory name contains unusual characters
+-m4_defun([_LT_CHECK_BUILDDIR],
+-[case `pwd` in
+- *\ * | *\ *)
+- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+-esac
+-])
++lt_cl_silent=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++_LTEOF
+
++cat >>"$CONFIG_LT" <<\_LTEOF
++AS_SHELL_SANITIZE
++_AS_PREPARE
+
+-# LT_INIT([OPTIONS])
+-# ------------------
+-AC_DEFUN([LT_INIT],
+-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+-AC_BEFORE([$0], [LT_LANG])dnl
+-AC_BEFORE([$0], [LT_OUTPUT])dnl
+-AC_BEFORE([$0], [LTDL_INIT])dnl
+-m4_require([_LT_CHECK_BUILDDIR])dnl
++exec AS_MESSAGE_FD>&1
++exec AS_MESSAGE_LOG_FD>>config.log
++{
++ echo
++ AS_BOX([Running $as_me.])
++} >&AS_MESSAGE_LOG_FD
+
+-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+-dnl unless we require an AC_DEFUNed macro:
+-AC_REQUIRE([LTOPTIONS_VERSION])dnl
+-AC_REQUIRE([LTSUGAR_VERSION])dnl
+-AC_REQUIRE([LTVERSION_VERSION])dnl
+-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+-m4_require([_LT_PROG_LTMAIN])dnl
++lt_cl_help="\
++\`$as_me' creates a local libtool stub from the current configuration,
++for use in further configure time tests before the real libtool is
++generated.
+
+-dnl Parse OPTIONS
+-_LT_SET_OPTIONS([$0], [$1])
++Usage: $[0] [[OPTIONS]]
+
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ltmain"
++ -h, --help print this help, then exit
++ -V, --version print version number, then exit
++ -q, --quiet do not print progress messages
++ -d, --debug don't remove temporary files
+
+-# Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
++Report bugs to <bug-libtool at gnu.org>."
+
+-_LT_SETUP
++lt_cl_version="\
++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
++configured by $[0], generated by m4_PACKAGE_STRING.
+
+-# Only expand once:
+-m4_define([LT_INIT])
+-])# LT_INIT
++Copyright (C) 2008 Free Software Foundation, Inc.
++This config.lt script is free software; the Free Software Foundation
++gives unlimited permision to copy, distribute and modify it."
+
+-# Old names:
+-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
++while test $[#] != 0
++do
++ case $[1] in
++ --version | --v* | -V )
++ echo "$lt_cl_version"; exit 0 ;;
++ --help | --h* | -h )
++ echo "$lt_cl_help"; exit 0 ;;
++ --debug | --d* | -d )
++ debug=: ;;
++ --quiet | --q* | --silent | --s* | -q )
++ lt_cl_silent=: ;;
+
++ -*) AC_MSG_ERROR([unrecognized option: $[1]
++Try \`$[0] --help' for more information.]) ;;
+
+-# _LT_CC_BASENAME(CC)
+-# -------------------
+-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+-m4_defun([_LT_CC_BASENAME],
+-[for cc_temp in $1""; do
+- case $cc_temp in
+- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+- \-*) ;;
+- *) break;;
++ *) AC_MSG_ERROR([unrecognized argument: $[1]
++Try \`$[0] --help' for more information.]) ;;
+ esac
++ shift
+ done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+-])
+-
+-
+-# _LT_FILEUTILS_DEFAULTS
+-# ----------------------
+-# It is okay to use these file commands and assume they have been set
+-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+-m4_defun([_LT_FILEUTILS_DEFAULTS],
+-[: ${CP="cp -f"}
+-: ${MV="mv -f"}
+-: ${RM="rm -f"}
+-])# _LT_FILEUTILS_DEFAULTS
+-
+-
+-# _LT_SETUP
+-# ---------
+-m4_defun([_LT_SETUP],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-_LT_DECL([], [host_alias], [0], [The host system])dnl
+-_LT_DECL([], [host], [0])dnl
+-_LT_DECL([], [host_os], [0])dnl
+-dnl
+-_LT_DECL([], [build_alias], [0], [The build system])dnl
+-_LT_DECL([], [build], [0])dnl
+-_LT_DECL([], [build_os], [0])dnl
+-dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([LT_PATH_LD])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-dnl
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-test -z "$LN_S" && LN_S="ln -s"
+-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+-dnl
+-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+-dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+-m4_require([_LT_CMD_RELOAD])dnl
+-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+-_LT_CONFIG_LIBTOOL_INIT([
+-# See if we are running on zsh, and set the options which allow our
+-# commands through without removal of \ escapes INIT.
+-if test -n "\${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+-fi
+-])
+-if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
++if $lt_cl_silent; then
++ exec AS_MESSAGE_FD>/dev/null
+ fi
++_LTEOF
+
+-_LT_CHECK_OBJDIR
++cat >>"$CONFIG_LT" <<_LTEOF
++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
++_LTEOF
+
+-m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
++cat >>"$CONFIG_LT" <<\_LTEOF
++AC_MSG_NOTICE([creating $ofile])
++_LT_OUTPUT_LIBTOOL_COMMANDS
++AS_EXIT(0)
++_LTEOF
++chmod +x "$CONFIG_LT"
+
+-case $host_os in
+-aix3*)
+- # AIX sometimes has problems with the GCC collect2 program. For some
+- # reason, if we set the COLLECT_NAMES environment variable, the problems
+- # vanish in a puff of smoke.
+- if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+- fi
+- ;;
+-esac
++# configure is writing to config.log, but config.lt does its own redirection,
++# appending to config.log, which fails on DOS, as config.log is still kept
++# open by configure. Here we exec the FD to /dev/null, effectively closing
++# config.log, so it can be properly (re)opened and appended to by config.lt.
++if test "$no_create" != yes; then
++ lt_cl_success=:
++ test "$silent" = yes &&
++ lt_config_lt_args="$lt_config_lt_args --quiet"
++ exec AS_MESSAGE_LOG_FD>/dev/null
++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++ exec AS_MESSAGE_LOG_FD>>config.log
++ $lt_cl_success || AS_EXIT(1)
++fi
++])# LT_OUTPUT
+
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++# _LT_CONFIG(TAG)
++# ---------------
++# If TAG is the built-in tag, create an initial libtool script with a
++# default configuration from the untagged config vars. Otherwise add code
++# to config.status for appending the configuration named by TAG from the
++# matching tagged config vars.
++m4_defun([_LT_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_CONFIG_SAVE_COMMANDS([
++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
++ m4_if(_LT_TAG, [C], [
++ # See if we are running on zsh, and set the options which allow our
++ # commands through without removal of \ escapes.
++ if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++ fi
+
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++ cfgfile="${ofile}T"
++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
++ $RM "$cfgfile"
+
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++ cat <<_LT_EOF >> "$cfgfile"
++#! $SHELL
+
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++_LT_COPYING
++_LT_LIBTOOL_TAGS
+
+-# Global variables:
+-ofile=libtool
+-can_build_shared=yes
++# ### BEGIN LIBTOOL CONFIG
++_LT_LIBTOOL_CONFIG_VARS
++_LT_LIBTOOL_TAG_VARS
++# ### END LIBTOOL CONFIG
+
+-# All known linkers require a `.a' archive for static linking (except MSVC,
+-# which needs '.lib').
+-libext=a
++_LT_EOF
+
+-with_gnu_ld="$lt_cv_prog_gnu_ld"
++ case $host_os in
++ aix3*)
++ cat <<\_LT_EOF >> "$cfgfile"
++# AIX sometimes has problems with the GCC collect2 program. For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++fi
++_LT_EOF
++ ;;
++ esac
+
+-old_CC="$CC"
+-old_CFLAGS="$CFLAGS"
++ _LT_PROG_LTMAIN
+
+-# Set sane defaults for various variables
+-test -z "$CC" && CC=cc
+-test -z "$LTCC" && LTCC=$CC
+-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+-test -z "$LD" && LD=ld
+-test -z "$ac_objext" && ac_objext=o
++ # We use sed instead of cat because bash on DJGPP gets confused if
++ # if finds mixed CR/LF and LF-only lines. Since sed operates in
++ # text mode, it properly converts lines to CR/LF. This bash problem
++ # is reportedly fixed, but why not run on old versions too?
++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
+-_LT_CC_BASENAME([$compiler])
++ _LT_PROG_XSI_SHELLFNS
+
+-# Only perform the check for file, if the check method requires it
+-test -z "$MAGIC_CMD" && MAGIC_CMD=file
+-case $deplibs_check_method in
+-file_magic*)
+- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- _LT_PATH_MAGIC
+- fi
+- ;;
+-esac
++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
+-# Use C for the default configuration in the libtool script
+-LT_SUPPORTED_TAG([CC])
+-_LT_LANG_C_CONFIG
+-_LT_LANG_DEFAULT_CONFIG
+-_LT_CONFIG_COMMANDS
+-])# _LT_SETUP
++ mv -f "$cfgfile" "$ofile" ||
++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++ chmod +x "$ofile"
++],
++[cat <<_LT_EOF >> "$ofile"
+
++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
++dnl in a comment (ie after a #).
++# ### BEGIN LIBTOOL TAG CONFIG: $1
++_LT_LIBTOOL_TAG_VARS(_LT_TAG)
++# ### END LIBTOOL TAG CONFIG: $1
++_LT_EOF
++])dnl /m4_if
++],
++[m4_if([$1], [], [
++ PACKAGE='$PACKAGE'
++ VERSION='$VERSION'
++ TIMESTAMP='$TIMESTAMP'
++ RM='$RM'
++ ofile='$ofile'], [])
++])dnl /_LT_CONFIG_SAVE_COMMANDS
++])# _LT_CONFIG
+
+-# _LT_PROG_LTMAIN
+-# ---------------
+-# Note that this code is called both from `configure', and `config.status'
+-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+-# so we pass a copy along to make sure it has a sensible value anyway.
+-m4_defun([_LT_PROG_LTMAIN],
+-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+-ltmain="$ac_aux_dir/ltmain.sh"
+-])# _LT_PROG_LTMAIN
+
++# LT_SUPPORTED_TAG(TAG)
++# ---------------------
++# Trace this macro to discover what tags are supported by the libtool
++# --tag option, using:
++# autoconf --trace 'LT_SUPPORTED_TAG:$1'
++AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+-# So that we can recreate a full libtool script including additional
+-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+-# in macros and then make a single call at the end using the `libtool'
+-# label.
++# C support is built-in for now
++m4_define([_LT_LANG_C_enabled], [])
++m4_define([_LT_TAGS], [])
+
+
+-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+-# ----------------------------------------
+-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+-m4_define([_LT_CONFIG_LIBTOOL_INIT],
+-[m4_ifval([$1],
+- [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+- [$1
+-])])])
++# LT_LANG(LANG)
++# -------------
++# Enable libtool support for the given language if not already enabled.
++AC_DEFUN([LT_LANG],
++[AC_BEFORE([$0], [LT_OUTPUT])dnl
++m4_case([$1],
++ [C], [_LT_LANG(C)],
++ [C++], [_LT_LANG(CXX)],
++ [Java], [_LT_LANG(GCJ)],
++ [Fortran 77], [_LT_LANG(F77)],
++ [Fortran], [_LT_LANG(FC)],
++ [Windows Resource], [_LT_LANG(RC)],
++ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
++ [_LT_LANG($1)],
++ [m4_fatal([$0: unsupported language: "$1"])])])dnl
++])# LT_LANG
+
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
++# _LT_LANG(LANGNAME)
++# ------------------
++m4_defun([_LT_LANG],
++[m4_ifdef([_LT_LANG_]$1[_enabled], [],
++ [LT_SUPPORTED_TAG([$1])dnl
++ m4_append([_LT_TAGS], [$1 ])dnl
++ m4_define([_LT_LANG_]$1[_enabled], [])dnl
++ _LT_LANG_$1_CONFIG($1)])dnl
++])# _LT_LANG
+
+-# _LT_CONFIG_LIBTOOL([COMMANDS])
+-# ------------------------------
+-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+-m4_define([_LT_CONFIG_LIBTOOL],
+-[m4_ifval([$1],
+- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+- [$1
+-])])])
+
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
++# _LT_LANG_DEFAULT_CONFIG
++# -----------------------
++m4_defun([_LT_LANG_DEFAULT_CONFIG],
++[AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [LT_LANG(CXX)],
++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
++AC_PROVIDE_IFELSE([AC_PROG_F77],
++ [LT_LANG(F77)],
++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+-# -----------------------------------------------------
+-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+-[_LT_CONFIG_LIBTOOL([$1])
+-_LT_CONFIG_LIBTOOL_INIT([$2])
+-])
++AC_PROVIDE_IFELSE([AC_PROG_FC],
++ [LT_LANG(FC)],
++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
++dnl pulling things in needlessly.
++AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [m4_ifdef([AC_PROG_GCJ],
++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
++ m4_ifdef([A][M_PROG_GCJ],
++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
++ m4_ifdef([LT_PROG_GCJ],
++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+-# _LT_FORMAT_COMMENT([COMMENT])
+-# -----------------------------
+-# Add leading comment marks to the start of each line, and a trailing
+-# full-stop to the whole comment if one is not present already.
+-m4_define([_LT_FORMAT_COMMENT],
+-[m4_ifval([$1], [
+-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+-)])
++AC_PROVIDE_IFELSE([LT_PROG_RC],
++ [LT_LANG(RC)],
++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
++])# _LT_LANG_DEFAULT_CONFIG
+
++# Obsolete macros:
++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
++dnl AC_DEFUN([AC_LIBTOOL_F77], [])
++dnl AC_DEFUN([AC_LIBTOOL_FC], [])
++dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
++# _LT_TAG_COMPILER
++# ----------------
++m4_defun([_LT_TAG_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
+
++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+-# -------------------------------------------------------------------
+-# CONFIGNAME is the name given to the value in the libtool script.
+-# VARNAME is the (base) name used in the configure script.
+-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+-# VARNAME. Any other value will be used directly.
+-m4_define([_LT_DECL],
+-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+- [m4_ifval([$1], [$1], [$2])])
+- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+- m4_ifval([$4],
+- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+- lt_dict_add_subkey([lt_decl_dict], [$2],
+- [tagged?], [m4_ifval([$5], [yes], [no])])])
+-])
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
+
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+-# --------------------------------------------------------
+-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_TAG_COMPILER
+
+
+-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+-# ------------------------------------------------
+-m4_define([lt_decl_tag_varnames],
+-[_lt_decl_filter([tagged?], [yes], $@)])
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++m4_defun([_LT_COMPILER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
++])# _LT_COMPILER_BOILERPLATE
+
+
+-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+-# ---------------------------------------------------------
+-m4_define([_lt_decl_filter],
+-[m4_case([$#],
+- [0], [m4_fatal([$0: too few arguments: $#])],
+- [1], [m4_fatal([$0: too few arguments: $#: $1])],
+- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+- [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+-])
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++m4_defun([_LT_LINKER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
++])# _LT_LINKER_BOILERPLATE
+
++# _LT_REQUIRED_DARWIN_CHECKS
++# -------------------------
++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
++ case $host_os in
++ rhapsody* | darwin*)
++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
++ AC_CHECK_TOOL([LIPO], [lipo], [:])
++ AC_CHECK_TOOL([OTOOL], [otool], [:])
++ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
++ _LT_DECL([], [DSYMUTIL], [1],
++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
++ _LT_DECL([], [NMEDIT], [1],
++ [Tool to change global to local symbols on Mac OS X])
++ _LT_DECL([], [LIPO], [1],
++ [Tool to manipulate fat objects and archives on Mac OS X])
++ _LT_DECL([], [OTOOL], [1],
++ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
++ _LT_DECL([], [OTOOL64], [1],
++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+-# --------------------------------------------------
+-m4_define([lt_decl_quote_varnames],
+-[_lt_decl_filter([value], [1], $@)])
++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
++ [lt_cv_apple_cc_single_mod=no
++ if test -z "${LT_MULTI_MODULE}"; then
++ # By default we will add the -single_module flag. You can override
++ # by either setting the environment variable LT_MULTI_MODULE
++ # non-empty at configure time, or by adding -multi_module to the
++ # link flags.
++ rm -rf libconftest.dylib*
++ echo "int foo(void){return 1;}" > conftest.c
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++ _lt_result=$?
++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
++ lt_cv_apple_cc_single_mod=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -rf libconftest.dylib*
++ rm -f conftest.*
++ fi])
++ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
++ [lt_cv_ld_exported_symbols_list],
++ [lt_cv_ld_exported_symbols_list=no
++ save_LDFLAGS=$LDFLAGS
++ echo "_main" > conftest.sym
++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [lt_cv_ld_exported_symbols_list=yes],
++ [lt_cv_ld_exported_symbols_list=no])
++ LDFLAGS="$save_LDFLAGS"
++ ])
++ case $host_os in
++ rhapsody* | darwin1.[[012]])
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++ darwin1.*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ darwin*) # darwin 5.x on
++ # if running on 10.5 or later, the deployment target defaults
++ # to the OS version, if on x86, and 10.4, the deployment
++ # target defaults to 10.4. Don't you love it?
++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ 10.[[012]]*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ 10.*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ esac
++ ;;
++ esac
++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++ _lt_dar_single_mod='$single_module'
++ fi
++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++ else
++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ fi
++ if test "$DSYMUTIL" != ":"; then
++ _lt_dsymutil='~$DSYMUTIL $lib || :'
++ else
++ _lt_dsymutil=
++ fi
++ ;;
++ esac
++])
+
+
+-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+-# ---------------------------------------------------
+-m4_define([lt_decl_dquote_varnames],
+-[_lt_decl_filter([value], [2], $@)])
++# _LT_DARWIN_LINKER_FEATURES
++# --------------------------
++# Checks for linker and compiler features on darwin
++m4_defun([_LT_DARWIN_LINKER_FEATURES],
++[
++ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_automatic, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
++ case $cc_basename in
++ ifort*) _lt_dar_can_shared=yes ;;
++ *) _lt_dar_can_shared=$GCC ;;
++ esac
++ if test "$_lt_dar_can_shared" = "yes"; then
++ output_verbose_link_cmd=echo
++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++ m4_if([$1], [CXX],
++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
++ fi
++],[])
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++])
+
++# _LT_SYS_MODULE_PATH_AIX
++# -----------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++m4_defun([_LT_SYS_MODULE_PATH_AIX],
++[m4_require([_LT_DECL_SED])dnl
++AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\(.*\)$/\1/
++ p
++ }
++ }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then
++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi],[])
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++])# _LT_SYS_MODULE_PATH_AIX
+
+-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+-# ---------------------------------------------------
+-m4_define([lt_decl_varnames_tagged],
+-[m4_assert([$# <= 2])dnl
+-_$0(m4_quote(m4_default([$1], [[, ]])),
+- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+-m4_define([_lt_decl_varnames_tagged],
+-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
++# _LT_SHELL_INIT(ARG)
++# -------------------
++m4_define([_LT_SHELL_INIT],
++[ifdef([AC_DIVERSION_NOTICE],
++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
++ [AC_DIVERT_PUSH(NOTICE)])
++$1
++AC_DIVERT_POP
++])# _LT_SHELL_INIT
+
+-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+-# ------------------------------------------------
+-m4_define([lt_decl_all_varnames],
+-[_$0(m4_quote(m4_default([$1], [[, ]])),
+- m4_if([$2], [],
+- m4_quote(lt_decl_varnames),
+- m4_quote(m4_shift($@))))[]dnl
+-])
+-m4_define([_lt_decl_all_varnames],
+-[lt_join($@, lt_decl_varnames_tagged([$1],
+- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+-])
+-
+-
+-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+-# ------------------------------------
+-# Quote a variable value, and forward it to `config.status' so that its
+-# declaration there will have the same value as in `configure'. VARNAME
+-# must have a single quote delimited value for this to work.
+-m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+-
+-
+-# _LT_CONFIG_STATUS_DECLARATIONS
+-# ------------------------------
+-# We delimit libtool config variables with single quotes, so when
+-# we write them to config.status, we have to be sure to quote all
+-# embedded single quotes properly. In configure, this macro expands
+-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+-#
+-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
++# _LT_PROG_ECHO_BACKSLASH
++# -----------------------
++# Add some code to the start of the generated configure script which
++# will find an echo command which doesn't interpret backslashes.
++m4_defun([_LT_PROG_ECHO_BACKSLASH],
++[_LT_SHELL_INIT([
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
+
+-# _LT_LIBTOOL_TAGS
+-# ----------------
+-# Output comment and list of tags supported by the script
+-m4_defun([_LT_LIBTOOL_TAGS],
+-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+-available_tags="_LT_TAGS"dnl
+-])
++case X$lt_ECHO in
++X*--fallback-echo)
++ # Remove one level of quotation (which was required for Make).
++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
++ ;;
++esac
+
++ECHO=${lt_ECHO-echo}
++if test "X[$]1" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++elif test "X[$]1" = X--fallback-echo; then
++ # Avoid inline document here, it may be left over
++ :
++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
++ # Yippee, $ECHO works!
++ :
++else
++ # Restart under the correct shell.
++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++fi
+
+-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+-# -----------------------------------
+-# Extract the dictionary values for VARNAME (optionally with TAG) and
+-# expand to a commented shell variable setting:
+-#
+-# # Some comment about what VAR is for.
+-# visible_name=$lt_internal_name
+-m4_define([_LT_LIBTOOL_DECLARE],
+-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+- [description])))[]dnl
+-m4_pushdef([_libtool_name],
+- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+- [0], [_libtool_name=[$]$1],
+- [1], [_libtool_name=$lt_[]$1],
+- [2], [_libtool_name=$lt_[]$1],
+- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+-])
++if test "X[$]1" = X--fallback-echo; then
++ # used as fallback echo
++ shift
++ cat <<_LT_EOF
++[$]*
++_LT_EOF
++ exit 0
++fi
+
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+-# _LT_LIBTOOL_CONFIG_VARS
+-# -----------------------
+-# Produce commented declarations of non-tagged libtool config variables
+-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+-# section) are produced by _LT_LIBTOOL_TAG_VARS.
+-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+-[m4_foreach([_lt_var],
+- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
++if test -z "$lt_ECHO"; then
++ if test "X${echo_test_string+set}" != Xset; then
++ # find a string as large as possible, as long as the shell can cope with it
++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
++ then
++ break
++ fi
++ done
++ fi
+
++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ :
++ else
++ # The Solaris, AIX, and Digital Unix default echo programs unquote
++ # backslashes. This makes it impossible to quote backslashes using
++ # echo "$something" | sed 's/\\/\\\\/g'
++ #
++ # So, first we look for a working echo in the user's PATH.
+
+-# _LT_LIBTOOL_TAG_VARS(TAG)
+-# -------------------------
+-m4_define([_LT_LIBTOOL_TAG_VARS],
+-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for dir in $PATH /usr/ucb; do
++ IFS="$lt_save_ifs"
++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ ECHO="$dir/echo"
++ break
++ fi
++ done
++ IFS="$lt_save_ifs"
+
++ if test "X$ECHO" = Xecho; then
++ # We didn't find a better echo, so look for alternatives.
++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # This shell has a builtin print -r that does the trick.
++ ECHO='print -r'
++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
++ test "X$CONFIG_SHELL" != X/bin/ksh; then
++ # If we have ksh, try running configure again with it.
++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++ export ORIGINAL_CONFIG_SHELL
++ CONFIG_SHELL=/bin/ksh
++ export CONFIG_SHELL
++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
++ else
++ # Try using printf.
++ ECHO='printf %s\n'
++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # Cool, printf works
++ :
++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++ export CONFIG_SHELL
++ SHELL="$CONFIG_SHELL"
++ export SHELL
++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
++ else
++ # maybe with a smaller string...
++ prev=:
+
+-# _LT_TAGVAR(VARNAME, [TAGNAME])
+-# ------------------------------
+-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
++ then
++ break
++ fi
++ prev="$cmd"
++ done
+
++ if test "$prev" != 'sed 50q "[$]0"'; then
++ echo_test_string=`eval $prev`
++ export echo_test_string
++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
++ else
++ # Oops. We lost completely, so just stick with echo.
++ ECHO=echo
++ fi
++ fi
++ fi
++ fi
++ fi
++fi
+
+-# _LT_CONFIG_COMMANDS
+-# -------------------
+-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+-# variables for single and double quote escaping we saved from calls
+-# to _LT_DECL, we can put quote escaped variables declarations
+-# into `config.status', and then the shell code to quote escape them in
+-# for loops in `config.status'. Finally, any additional code accumulated
+-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+-m4_defun([_LT_CONFIG_COMMANDS],
+-[AC_PROVIDE_IFELSE([LT_OUTPUT],
+- dnl If the libtool generation code has been placed in $CONFIG_LT,
+- dnl instead of duplicating it all over again into config.status,
+- dnl then we will have config.status run $CONFIG_LT later, so it
+- dnl needs to know what name is stored there:
+- [AC_CONFIG_COMMANDS([libtool],
+- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+- dnl If the libtool generation code is destined for config.status,
+- dnl expand the accumulated commands and init code now:
+- [AC_CONFIG_COMMANDS([libtool],
+- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+-])#_LT_CONFIG_COMMANDS
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++lt_ECHO=$ECHO
++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
++ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
++fi
+
++AC_SUBST(lt_ECHO)
++])
++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
++_LT_DECL([], [ECHO], [1],
++ [An echo program that does not interpret backslashes])
++])# _LT_PROG_ECHO_BACKSLASH
+
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+-[
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++# _LT_ENABLE_LOCK
++# ---------------
++m4_defun([_LT_ENABLE_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++ [AS_HELP_STRING([--disable-libtool-lock],
++ [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+-sed_quote_subst='$sed_quote_subst'
+-double_quote_subst='$double_quote_subst'
+-delay_variable_subst='$delay_variable_subst'
+-_LT_CONFIG_STATUS_DECLARATIONS
+-LTCC='$LTCC'
+-LTCFLAGS='$LTCFLAGS'
+-compiler='$compiler_DEFAULT'
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *ELF-32*)
++ HPUX_IA64_MODE="32"
++ ;;
++ *ELF-64*)
++ HPUX_IA64_MODE="64"
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++*-*-irix6*)
++ # Find out which ABI we are using.
++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -melf32bsmip"
++ ;;
++ *N32*)
++ LD="${LD-ld} -melf32bmipn32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -melf64bmip"
++ ;;
++ esac
++ else
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -32"
++ ;;
++ *N32*)
++ LD="${LD-ld} -n32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -64"
++ ;;
++ esac
++ fi
++ fi
++ rm -rf conftest*
++ ;;
+
+-# Quote evaled strings.
+-for var in lt_decl_all_varnames([[ \
+-]], lt_decl_quote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+- *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+- ;;
+- *)
+- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+- ;;
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *32-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_i386_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_i386"
++ ;;
++ ppc64-*linux*|powerpc64-*linux*)
++ LD="${LD-ld} -m elf32ppclinux"
++ ;;
++ s390x-*linux*)
++ LD="${LD-ld} -m elf_s390"
++ ;;
++ sparc64-*linux*)
++ LD="${LD-ld} -m elf32_sparc"
++ ;;
++ esac
++ ;;
++ *64-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_x86_64_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ ppc*-*linux*|powerpc*-*linux*)
++ LD="${LD-ld} -m elf64ppc"
++ ;;
++ s390*-*linux*|s390*-*tpf*)
++ LD="${LD-ld} -m elf64_s390"
++ ;;
++ sparc*-*linux*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ ;;
+ esac
+-done
++ fi
++ rm -rf conftest*
++ ;;
+
+-# Double-quote double-evaled strings.
+-for var in lt_decl_all_varnames([[ \
+-]], lt_decl_dquote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+- *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+- ;;
+- *)
+- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++*-*-sco3.2v5*)
++ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++ SAVE_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS -belf"
++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++ [AC_LANG_PUSH(C)
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++ AC_LANG_POP])
++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++ CFLAGS="$SAVE_CFLAGS"
++ fi
++ ;;
++sparc*-*solaris*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *64-bit*)
++ case $lt_cv_prog_gnu_ld in
++ yes*) LD="${LD-ld} -m elf64_sparc" ;;
++ *)
++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++ LD="${LD-ld} -64"
++ fi
++ ;;
++ esac
;;
- *64-bit*)
-- libsuff=64
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
-@@ -1629,13 +1631,11 @@
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ esac
+-done
+-
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
++ fi
++ rm -rf conftest*
+ ;;
+ esac
+
+-_LT_OUTPUT_LIBTOOL_INIT
+-])
+-
+-
+-# LT_OUTPUT
+-# ---------
+-# This macro allows early generation of the libtool script (before
+-# AC_OUTPUT is called), incase it is used in configure for compilation
+-# tests.
+-AC_DEFUN([LT_OUTPUT],
+-[: ${CONFIG_LT=./config.lt}
+-AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
+-exec AS_MESSAGE_LOG_FD>>config.log
+-{
+- echo
+- AS_BOX([Running $as_me.])
+-} >&AS_MESSAGE_LOG_FD
++need_locks="$enable_libtool_lock"
++])# _LT_ENABLE_LOCK
+
+-lt_cl_help="\
+-\`$as_me' creates a local libtool stub from the current configuration,
+-for use in further configure time tests before the real libtool is
+-generated.
+
+-Usage: $[0] [[OPTIONS]]
++# _LT_CMD_OLD_ARCHIVE
++# -------------------
++m4_defun([_LT_CMD_OLD_ARCHIVE],
++[AC_CHECK_TOOL(AR, ar, false)
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1])
+
+- -h, --help print this help, then exit
+- -V, --version print version number, then exit
+- -q, --quiet do not print progress messages
+- -d, --debug don't remove temporary files
++AC_CHECK_TOOL(STRIP, strip, :)
++test -z "$STRIP" && STRIP=:
++_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+-Report bugs to <bug-libtool at gnu.org>."
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++test -z "$RANLIB" && RANLIB=:
++_LT_DECL([], [RANLIB], [1],
++ [Commands used to install an old-style archive])
+
+-lt_cl_version="\
+-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+-configured by $[0], generated by m4_PACKAGE_STRING.
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
+
+-Copyright (C) 2008 Free Software Foundation, Inc.
+-This config.lt script is free software; the Free Software Foundation
+-gives unlimited permision to copy, distribute and modify it."
++if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++ ;;
++ *)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++ ;;
++ esac
++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++fi
++_LT_DECL([], [old_postinstall_cmds], [2])
++_LT_DECL([], [old_postuninstall_cmds], [2])
++_LT_TAGDECL([], [old_archive_cmds], [2],
++ [Commands used to build an old-style archive])
++])# _LT_CMD_OLD_ARCHIVE
+
+-while test $[#] != 0
+-do
+- case $[1] in
+- --version | --v* | -V )
+- echo "$lt_cl_version"; exit 0 ;;
+- --help | --h* | -h )
+- echo "$lt_cl_help"; exit 0 ;;
+- --debug | --d* | -d )
+- debug=: ;;
+- --quiet | --q* | --silent | --s* | -q )
+- lt_cl_silent=: ;;
+
+- -*) AC_MSG_ERROR([unrecognized option: $[1]
+-Try \`$[0] --help' for more information.]) ;;
+-
+- *) AC_MSG_ERROR([unrecognized argument: $[1]
+-Try \`$[0] --help' for more information.]) ;;
+- esac
+- shift
+-done
++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([_LT_COMPILER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ lt_compiler_flag="$3"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ # The option is referenced via a variable to avoid confusing sed.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>conftest.err)
++ ac_status=$?
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s "$ac_outfile"; then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings other than the usual output.
++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ fi
++ $RM conftest*
++])
+
+-if $lt_cl_silent; then
+- exec AS_MESSAGE_FD>/dev/null
++if test x"[$]$2" = xyes; then
++ m4_if([$5], , :, [$5])
++else
++ m4_if([$6], , :, [$6])
+ fi
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<_LTEOF
+-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<\_LTEOF
+-AC_MSG_NOTICE([creating $ofile])
+-_LT_OUTPUT_LIBTOOL_COMMANDS
+-AS_EXIT(0)
+-_LTEOF
+-chmod +x "$CONFIG_LT"
++])# _LT_COMPILER_OPTION
+
+-# configure is writing to config.log, but config.lt does its own redirection,
+-# appending to config.log, which fails on DOS, as config.log is still kept
+-# open by configure. Here we exec the FD to /dev/null, effectively closing
+-# config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+- lt_cl_success=:
+- test "$silent" = yes &&
+- lt_config_lt_args="$lt_config_lt_args --quiet"
+- exec AS_MESSAGE_LOG_FD>/dev/null
+- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+- exec AS_MESSAGE_LOG_FD>>config.log
+- $lt_cl_success || AS_EXIT(1)
+-fi
+-])# LT_OUTPUT
++# Old name:
++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+-# _LT_CONFIG(TAG)
+-# ---------------
+-# If TAG is the built-in tag, create an initial libtool script with a
+-# default configuration from the untagged config vars. Otherwise add code
+-# to config.status for appending the configuration named by TAG from the
+-# matching tagged config vars.
+-m4_defun([_LT_CONFIG],
++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------
++# Check whether the given linker option works
++AC_DEFUN([_LT_LINKER_OPTION],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-_LT_CONFIG_SAVE_COMMANDS([
+- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+- m4_if(_LT_TAG, [C], [
+- # See if we are running on zsh, and set the options which allow our
+- # commands through without removal of \ escapes.
+- if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+- fi
+-
+- cfgfile="${ofile}T"
+- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+- $RM "$cfgfile"
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS $3"
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++ # The linker can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ if test -s conftest.err; then
++ # Append any errors to the config.log.
++ cat conftest.err 1>&AS_MESSAGE_LOG_FD
++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ else
++ $2=yes
++ fi
++ fi
++ $RM -r conftest*
++ LDFLAGS="$save_LDFLAGS"
++])
+
+- cat <<_LT_EOF >> "$cfgfile"
+-#! $SHELL
++if test x"[$]$2" = xyes; then
++ m4_if([$4], , :, [$4])
++else
++ m4_if([$5], , :, [$5])
++fi
++])# _LT_LINKER_OPTION
+
+-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+-#
+-_LT_COPYING
+-_LT_LIBTOOL_TAGS
++# Old name:
++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+-# ### BEGIN LIBTOOL CONFIG
+-_LT_LIBTOOL_CONFIG_VARS
+-_LT_LIBTOOL_TAG_VARS
+-# ### END LIBTOOL CONFIG
+
+-_LT_EOF
++# LT_CMD_MAX_LEN
++#---------------
++AC_DEFUN([LT_CMD_MAX_LEN],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++ i=0
++ teststring="ABCD"
+
+- case $host_os in
+- aix3*)
+- cat <<\_LT_EOF >> "$cfgfile"
+-# AIX sometimes has problems with the GCC collect2 program. For some
+-# reason, if we set the COLLECT_NAMES environment variable, the problems
+-# vanish in a puff of smoke.
+-if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+-fi
+-_LT_EOF
++ case $build_os in
++ msdosdjgpp*)
++ # On DJGPP, this test can blow up pretty badly due to problems in libc
++ # (any single argument exceeding 2000 bytes causes a buffer overrun
++ # during glob expansion). Even if it were fixed, the result of this
++ # check would be larger than it should be.
++ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+- esac
+-
+- _LT_PROG_LTMAIN
+-
+- # We use sed instead of cat because bash on DJGPP gets confused if
+- # if finds mixed CR/LF and LF-only lines. Since sed operates in
+- # text mode, it properly converts lines to CR/LF. This bash problem
+- # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+
+- _LT_PROG_XSI_SHELLFNS
++ gnu*)
++ # Under GNU Hurd, this test is not required because there is
++ # no limit to the length of command line arguments.
++ # Libtool will interpret -1 as no limit whatsoever
++ lt_cv_sys_max_cmd_len=-1;
++ ;;
+
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
++ cygwin* | mingw* | cegcc*)
++ # On Win9x/ME, this test blows up -- it succeeds, but takes
++ # about 5 minutes as the teststring grows exponentially.
++ # Worse, since 9x/ME are not pre-emptively multitasking,
++ # you end up with a "frozen" computer, even though with patience
++ # the test eventually succeeds (with a max line length of 256k).
++ # Instead, let's just punt: use the minimum linelength reported by
++ # all of the supported platforms: 8192 (on NT/2K/XP).
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
+
+- mv -f "$cfgfile" "$ofile" ||
+- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+- chmod +x "$ofile"
+-],
+-[cat <<_LT_EOF >> "$ofile"
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
+
+-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+-dnl in a comment (ie after a #).
+-# ### BEGIN LIBTOOL TAG CONFIG: $1
+-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+-# ### END LIBTOOL TAG CONFIG: $1
+-_LT_EOF
+-])dnl /m4_if
+-],
+-[m4_if([$1], [], [
+- PACKAGE='$PACKAGE'
+- VERSION='$VERSION'
+- TIMESTAMP='$TIMESTAMP'
+- RM='$RM'
+- ofile='$ofile'], [])
+-])dnl /_LT_CONFIG_SAVE_COMMANDS
+-])# _LT_CONFIG
++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++ # This has been around since 386BSD, at least. Likely further.
++ if test -x /sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++ elif test -x /usr/sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++ else
++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ fi
++ # And add a safety zone
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ ;;
+
++ interix*)
++ # We know the value 262144 and hardcode it with a safety zone (like BSD)
++ lt_cv_sys_max_cmd_len=196608
++ ;;
+
+-# LT_SUPPORTED_TAG(TAG)
+-# ---------------------
+-# Trace this macro to discover what tags are supported by the libtool
+-# --tag option, using:
+-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+-AC_DEFUN([LT_SUPPORTED_TAG], [])
+-
++ osf*)
++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++ # nice to cause kernel panics so lets avoid the loop below.
++ # First set a reasonable default.
++ lt_cv_sys_max_cmd_len=16384
++ #
++ if test -x /sbin/sysconfig; then
++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++ *1*) lt_cv_sys_max_cmd_len=-1 ;;
++ esac
++ fi
++ ;;
++ sco3.2v5*)
++ lt_cv_sys_max_cmd_len=102400
++ ;;
++ sysv5* | sco5v6* | sysv4.2uw2*)
++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++ if test -n "$kargmax"; then
++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
++ else
++ lt_cv_sys_max_cmd_len=32768
++ fi
++ ;;
++ *)
++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++ if test -n "$lt_cv_sys_max_cmd_len"; then
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ else
++ # Make teststring a little bigger before we do anything with it.
++ # a 1K string should be a reasonable start.
++ for i in 1 2 3 4 5 6 7 8 ; do
++ teststring=$teststring$teststring
++ done
++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++ # If test is not a shell built-in, we'll probably end up computing a
++ # maximum length that is only half of the actual maximum length, but
++ # we can't tell.
++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
++ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++ test $i != 17 # 1/2 MB should be enough
++ do
++ i=`expr $i + 1`
++ teststring=$teststring$teststring
++ done
++ # Only check the string length outside the loop.
++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
++ teststring=
++ # Add a significant safety factor because C++ compilers can tack on
++ # massive amounts of additional arguments before passing them to the
++ # linker. It appears as though 1/2 is a usable value.
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ fi
++ ;;
++ esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++ AC_MSG_RESULT(none)
++fi
++max_cmd_len=$lt_cv_sys_max_cmd_len
++_LT_DECL([], [max_cmd_len], [0],
++ [What is the maximum length of a command?])
++])# LT_CMD_MAX_LEN
+
+-# C support is built-in for now
+-m4_define([_LT_LANG_C_enabled], [])
+-m4_define([_LT_TAGS], [])
++# Old name:
++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+-# LT_LANG(LANG)
+-# -------------
+-# Enable libtool support for the given language if not already enabled.
+-AC_DEFUN([LT_LANG],
+-[AC_BEFORE([$0], [LT_OUTPUT])dnl
+-m4_case([$1],
+- [C], [_LT_LANG(C)],
+- [C++], [_LT_LANG(CXX)],
+- [Java], [_LT_LANG(GCJ)],
+- [Fortran 77], [_LT_LANG(F77)],
+- [Fortran], [_LT_LANG(FC)],
+- [Windows Resource], [_LT_LANG(RC)],
+- [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+- [_LT_LANG($1)],
+- [m4_fatal([$0: unsupported language: "$1"])])])dnl
+-])# LT_LANG
++# _LT_HEADER_DLFCN
++# ----------------
++m4_defun([_LT_HEADER_DLFCN],
++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
++])# _LT_HEADER_DLFCN
+
+
+-# _LT_LANG(LANGNAME)
+-# ------------------
+-m4_defun([_LT_LANG],
+-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+- [LT_SUPPORTED_TAG([$1])dnl
+- m4_append([_LT_TAGS], [$1 ])dnl
+- m4_define([_LT_LANG_]$1[_enabled], [])dnl
+- _LT_LANG_$1_CONFIG($1)])dnl
+-])# _LT_LANG
++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ----------------------------------------------------------------
++m4_defun([_LT_TRY_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++ [$4]
++else
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<_LT_EOF
++[#line __oline__ "configure"
++#include "confdefs.h"
+
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
+
+-# _LT_LANG_DEFAULT_CONFIG
+-# -----------------------
+-m4_defun([_LT_LANG_DEFAULT_CONFIG],
+-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [LT_LANG(CXX)],
+- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
++#include <stdio.h>
+
+-AC_PROVIDE_IFELSE([AC_PROG_F77],
+- [LT_LANG(F77)],
+- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
+
+-AC_PROVIDE_IFELSE([AC_PROG_FC],
+- [LT_LANG(FC)],
+- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
+
+-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+-dnl pulling things in needlessly.
+-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [m4_ifdef([AC_PROG_GCJ],
+- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+- m4_ifdef([A][M_PROG_GCJ],
+- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+- m4_ifdef([LT_PROG_GCJ],
+- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
++void fnord() { int i=42;}
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
+
+-AC_PROVIDE_IFELSE([LT_PROG_RC],
+- [LT_LANG(RC)],
+- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+-])# _LT_LANG_DEFAULT_CONFIG
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
+
+-# Obsolete macros:
+-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++ return status;
++}]
++_LT_EOF
++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) $1 ;;
++ x$lt_dlneed_uscore) $2 ;;
++ x$lt_dlunknown|x*) $3 ;;
++ esac
++ else :
++ # compilation failed
++ $3
++ fi
++fi
++rm -fr conftest*
++])# _LT_TRY_DLOPEN_SELF
+
+
+-# _LT_TAG_COMPILER
+-# ----------------
+-m4_defun([_LT_TAG_COMPILER],
+-[AC_REQUIRE([AC_PROG_CC])dnl
++# LT_SYS_DLOPEN_SELF
++# ------------------
++AC_DEFUN([LT_SYS_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++ enable_dlopen=unknown
++ enable_dlopen_self=unknown
++ enable_dlopen_self_static=unknown
++else
++ lt_cv_dlopen=no
++ lt_cv_dlopen_libs=
+
+-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
++ case $host_os in
++ beos*)
++ lt_cv_dlopen="load_add_on"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ;;
+
+-# If no C compiler was specified, use CC.
+-LTCC=${LTCC-"$CC"}
++ mingw* | pw32* | cegcc*)
++ lt_cv_dlopen="LoadLibrary"
++ lt_cv_dlopen_libs=
++ ;;
+
+-# If no C compiler flags were specified, use CFLAGS.
+-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++ cygwin*)
++ lt_cv_dlopen="dlopen"
++ lt_cv_dlopen_libs=
++ ;;
+
+-# Allow CC to be a program name with arguments.
+-compiler=$CC
+-])# _LT_TAG_COMPILER
++ darwin*)
++ # if libdl is installed we need to link against it
++ AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++ lt_cv_dlopen="dyld"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ])
++ ;;
+
++ *)
++ AC_CHECK_FUNC([shl_load],
++ [lt_cv_dlopen="shl_load"],
++ [AC_CHECK_LIB([dld], [shl_load],
++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
++ [AC_CHECK_FUNC([dlopen],
++ [lt_cv_dlopen="dlopen"],
++ [AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++ [AC_CHECK_LIB([svld], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++ [AC_CHECK_LIB([dld], [dld_link],
++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
++ ])
++ ])
++ ])
++ ])
++ ])
++ ;;
++ esac
+
+-# _LT_COMPILER_BOILERPLATE
+-# ------------------------
+-# Check for compiler boilerplate output or warnings with
+-# the simple compiler test code.
+-m4_defun([_LT_COMPILER_BOILERPLATE],
+-[m4_require([_LT_DECL_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_compiler_boilerplate=`cat conftest.err`
+-$RM conftest*
+-])# _LT_COMPILER_BOILERPLATE
++ if test "x$lt_cv_dlopen" != xno; then
++ enable_dlopen=yes
++ else
++ enable_dlopen=no
++ fi
+
++ case $lt_cv_dlopen in
++ dlopen)
++ save_CPPFLAGS="$CPPFLAGS"
++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+-# _LT_LINKER_BOILERPLATE
+-# ----------------------
+-# Check for linker boilerplate output or warnings with
+-# the simple link test code.
+-m4_defun([_LT_LINKER_BOILERPLATE],
+-[m4_require([_LT_DECL_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_linker_boilerplate=`cat conftest.err`
+-$RM -r conftest*
+-])# _LT_LINKER_BOILERPLATE
++ save_LDFLAGS="$LDFLAGS"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+-# _LT_REQUIRED_DARWIN_CHECKS
+-# -------------------------
+-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+- case $host_os in
+- rhapsody* | darwin*)
+- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+- AC_CHECK_TOOL([LIPO], [lipo], [:])
+- AC_CHECK_TOOL([OTOOL], [otool], [:])
+- AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+- _LT_DECL([], [DSYMUTIL], [1],
+- [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+- _LT_DECL([], [NMEDIT], [1],
+- [Tool to change global to local symbols on Mac OS X])
+- _LT_DECL([], [LIPO], [1],
+- [Tool to manipulate fat objects and archives on Mac OS X])
+- _LT_DECL([], [OTOOL], [1],
+- [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+- _LT_DECL([], [OTOOL64], [1],
+- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
++ save_LIBS="$LIBS"
++ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+- [lt_cv_apple_cc_single_mod=no
+- if test -z "${LT_MULTI_MODULE}"; then
+- # By default we will add the -single_module flag. You can override
+- # by either setting the environment variable LT_MULTI_MODULE
+- # non-empty at configure time, or by adding -multi_module to the
+- # link flags.
+- rm -rf libconftest.dylib*
+- echo "int foo(void){return 1;}" > conftest.c
+- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+- _lt_result=$?
+- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+- lt_cv_apple_cc_single_mod=yes
+- else
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- fi
+- rm -rf libconftest.dylib*
+- rm -f conftest.*
+- fi])
+- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+- [lt_cv_ld_exported_symbols_list],
+- [lt_cv_ld_exported_symbols_list=no
+- save_LDFLAGS=$LDFLAGS
+- echo "_main" > conftest.sym
+- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [lt_cv_ld_exported_symbols_list=yes],
+- [lt_cv_ld_exported_symbols_list=no])
+- LDFLAGS="$save_LDFLAGS"
++ AC_CACHE_CHECK([whether a program can dlopen itself],
++ lt_cv_dlopen_self, [dnl
++ _LT_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+- case $host_os in
+- rhapsody* | darwin1.[[012]])
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+- darwin1.*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- darwin*) # darwin 5.x on
+- # if running on 10.5 or later, the deployment target defaults
+- # to the OS version, if on x86, and 10.4, the deployment
+- # target defaults to 10.4. Don't you love it?
+- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- 10.[[012]]*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- 10.*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- esac
+- ;;
+- esac
+- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+- _lt_dar_single_mod='$single_module'
+- fi
+- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+- else
+- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- fi
+- if test "$DSYMUTIL" != ":"; then
+- _lt_dsymutil='~$DSYMUTIL $lib || :'
+- else
+- _lt_dsymutil=
++
++ if test "x$lt_cv_dlopen_self" = xyes; then
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++ lt_cv_dlopen_self_static, [dnl
++ _LT_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
++ ])
+ fi
++
++ CPPFLAGS="$save_CPPFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++ LIBS="$save_LIBS"
+ ;;
+ esac
+-])
+
++ case $lt_cv_dlopen_self in
++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++ *) enable_dlopen_self=unknown ;;
++ esac
+
+-# _LT_DARWIN_LINKER_FEATURES
+-# --------------------------
+-# Checks for linker and compiler features on darwin
+-m4_defun([_LT_DARWIN_LINKER_FEATURES],
+-[
+- m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+- case $cc_basename in
+- ifort*) _lt_dar_can_shared=yes ;;
+- *) _lt_dar_can_shared=$GCC ;;
++ case $lt_cv_dlopen_self_static in
++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++ *) enable_dlopen_self_static=unknown ;;
+ esac
+- if test "$_lt_dar_can_shared" = "yes"; then
+- output_verbose_link_cmd=echo
+- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+- m4_if([$1], [CXX],
+-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+- fi
+-],[])
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+-])
++fi
++_LT_DECL([dlopen_support], [enable_dlopen], [0],
++ [Whether dlopen is supported])
++_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
++ [Whether dlopen of programs is supported])
++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
++ [Whether dlopen of statically linked programs is supported])
++])# LT_SYS_DLOPEN_SELF
+
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
+-# Links a minimal program and checks the executable
+-# for the system default hardcoded library path. In most cases,
+-# this is /usr/lib:/lib, but when the MPI compilers are used
+-# the location of the communication and MPI libs are included too.
+-# If we don't find anything, use the default library path according
+-# to the aix ld manual.
+-m4_defun([_LT_SYS_MODULE_PATH_AIX],
+-[m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+-])# _LT_SYS_MODULE_PATH_AIX
++# Old name:
++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+-# _LT_SHELL_INIT(ARG)
+-# -------------------
+-m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
++# _LT_COMPILER_C_O([TAGNAME])
++# ---------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler.
++# This macro does not hard code the compiler like AC_PROG_CC_C_O.
++m4_defun([_LT_COMPILER_C_O],
++[m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++ $RM -r conftest 2>/dev/null
++ mkdir conftest
++ cd conftest
++ mkdir out
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
++ lt_compiler_flag="-o out/conftest2.$ac_objext"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>out/conftest.err)
++ ac_status=$?
++ cat out/conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s out/conftest2.$ac_objext
++ then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++ fi
++ fi
++ chmod u+w . 2>&AS_MESSAGE_LOG_FD
++ $RM conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++ $RM out/* && rmdir out
++ cd ..
++ $RM -r conftest
++ $RM conftest*
++])
++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
++ [Does compiler simultaneously support -c and -o options?])
++])# _LT_COMPILER_C_O
+
+-# _LT_PROG_ECHO_BACKSLASH
+-# -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
+-m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+
+-case X$lt_ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
++# _LT_COMPILER_FILE_LOCKS([TAGNAME])
++# ----------------------------------
++# Check to see if we can do hard links to lock some files if needed
++m4_defun([_LT_COMPILER_FILE_LOCKS],
++[m4_require([_LT_ENABLE_LOCK])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_COMPILER_C_O([$1])
+
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $ECHO works!
+- :
++hard_links="nottested"
++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++ # do not overwrite the value of need_locks provided by the user
++ AC_MSG_CHECKING([if we can lock with hard links])
++ hard_links=yes
++ $RM conftest*
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ touch conftest.a
++ ln conftest.a conftest.b 2>&5 || hard_links=no
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ AC_MSG_RESULT([$hard_links])
++ if test "$hard_links" = no; then
++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++ need_locks=warn
++ fi
+ else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++ need_locks=no
+ fi
++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
++])# _LT_COMPILER_FILE_LOCKS
+
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+- exit 0
++
++# _LT_CHECK_OBJDIR
++# ----------------
++m4_defun([_LT_CHECK_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++ lt_cv_objdir=.libs
++else
++ # MS-DOS does not allow filenames that begin with a dot.
++ lt_cv_objdir=_libs
+ fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++_LT_DECL([], [objdir], [0],
++ [The name of the directory that contains temporary libtool files])dnl
++m4_pattern_allow([LT_OBJDIR])dnl
++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
++ [Define to the sub-directory in which libtool stores uninstalled libraries.])
++])# _LT_CHECK_OBJDIR
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+-if test -z "$lt_ECHO"; then
+- if test "X${echo_test_string+set}" != Xset; then
+- # find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+- then
+- break
+- fi
+- done
+- fi
++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
++# --------------------------------------
++# Check hardcoding attributes.
++m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
++ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
++ # We can hardcode non-existent directories.
++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
++ # If the only mechanism to avoid hardcoding is shlibpath_var, we
++ # have to relink, otherwise we might link with an installed library
++ # when we should be linking with a yet-to-be-installed one
++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
++ # Linking always hardcodes the temporary library directory.
++ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
++ # We can link without hardcoding, and we can hardcode nonexisting dirs.
++ _LT_TAGVAR(hardcode_action, $1)=immediate
++ fi
++else
++ # We cannot hardcode anything, or else we can only hardcode existing
++ # directories.
++ _LT_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
++ # Fast installation is not supported
++ enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++ test "$enable_shared" = no; then
++ # Fast installation is not necessary
++ enable_fast_install=needless
++fi
++_LT_TAGDECL([], [hardcode_action], [0],
++ [How to hardcode a shared library path into an executable])
++])# _LT_LINKER_HARDCODE_LIBPATH
+
+- if test "X$ECHO" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- ECHO='print -r'
+- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- ECHO='printf %s\n'
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
+-
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- ECHO=echo
+- fi
+- fi
+- fi
++# _LT_CMD_STRIPLIB
++# ----------------
++m4_defun([_LT_CMD_STRIPLIB],
++[m4_require([_LT_DECL_EGREP])
++striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++ AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++ case $host_os in
++ darwin*)
++ if test -n "$STRIP" ; then
++ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
+ fi
+- fi
++ ;;
++ *)
++ AC_MSG_RESULT([no])
++ ;;
++ esac
+ fi
++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
++_LT_DECL([], [striplib], [1])
++])# _LT_CMD_STRIPLIB
+
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
+
+-AC_SUBST(lt_ECHO)
+-])
+-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+- [An echo program that does not interpret backslashes])
+-])# _LT_PROG_ECHO_BACKSLASH
++# _LT_SYS_DYNAMIC_LINKER([TAG])
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++m4_defun([_LT_SYS_DYNAMIC_LINKER],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_OBJDUMP])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
++m4_if([$1],
++ [], [
++if test "$GCC" = yes; then
++ case $host_os in
++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++ *) lt_awk_arg="/^libraries:/" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # Ok, now we have the path, separated by spaces, we can step through it
++ # and add multilib dir if necessary.
++ lt_tmp_lt_search_path_spec=
++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++ for lt_sys_path in $lt_search_path_spec; do
++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++ else
++ test -d "$lt_sys_path" && \
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++ fi
++ done
++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++ lt_foo="";
++ lt_count=0;
++ for (lt_i = NF; lt_i > 0; lt_i--) {
++ if ($lt_i != "" && $lt_i != ".") {
++ if ($lt_i == "..") {
++ lt_count++;
++ } else {
++ if (lt_count == 0) {
++ lt_foo="/" $lt_i lt_foo;
++ } else {
++ lt_count--;
++ }
++ }
++ }
++ }
++ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++need_lib_prefix=unknown
++hardcode_into_libs=no
+
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
+
+-# _LT_ENABLE_LOCK
+-# ---------------
+-m4_defun([_LT_ENABLE_LOCK],
+-[AC_ARG_ENABLE([libtool-lock],
+- [AS_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++case $host_os in
++aix3*)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++ shlibpath_var=LIBPATH
+
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case $host in
+-ia64-*-hpux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *ELF-32*)
+- HPUX_IA64_MODE="32"
+- ;;
+- *ELF-64*)
+- HPUX_IA64_MODE="64"
+- ;;
+- esac
+- fi
+- rm -rf conftest*
++ # AIX 3 has no versioning support, so we append a major version to the name.
++ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+-*-*-irix6*)
+- # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -melf32bsmip"
+- ;;
+- *N32*)
+- LD="${LD-ld} -melf32bmipn32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -melf64bmip"
+- ;;
+- esac
++
++aix[[4-9]]*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
++ if test "$host_cpu" = ia64; then
++ # AIX 5 supports IA64
++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ else
++ # With GCC up to 2.95.x, collect2 would create an import file
++ # for dependence libraries. The import file would start with
++ # the line `#! .'. This would cause the generated library to
++ # depend on `.', always an invalid library. This was fixed in
++ # development snapshots of GCC prior to 3.0.
++ case $host_os in
++ aix4 | aix4.[[01]] | aix4.[[01]].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
++ ;;
++ esac
++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++ # soname into executable. Probably we can add versioning support to
++ # collect2, so additional links can be useful in future.
++ if test "$aix_use_runtimelinking" = yes; then
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -32"
+- ;;
+- *N32*)
+- LD="${LD-ld} -n32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -64"
+- ;;
+- esac
++ # We preserve .a as extension for shared libraries through AIX4.2
++ # and later when we are not doing run time linking.
++ library_names_spec='${libname}${release}.a $libname.a'
++ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
++ shlibpath_var=LIBPATH
fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
-@@ -1647,6 +1647,18 @@
+- rm -rf conftest*
+ ;;
+
+-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *32-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_i386_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_i386"
+- ;;
+- ppc64-*linux*|powerpc64-*linux*)
+- LD="${LD-ld} -m elf32ppclinux"
+- ;;
+- s390x-*linux*)
+- LD="${LD-ld} -m elf_s390"
+- ;;
+- sparc64-*linux*)
+- LD="${LD-ld} -m elf32_sparc"
+- ;;
+- esac
+- ;;
+- *64-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_x86_64_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_x86_64"
+- ;;
+- ppc*-*linux*|powerpc*-*linux*)
+- LD="${LD-ld} -m elf64ppc"
+- ;;
+- s390*-*linux*|s390*-*tpf*)
+- LD="${LD-ld} -m elf64_s390"
+- ;;
+- sparc*-*linux*)
+- LD="${LD-ld} -m elf64_sparc"
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
++amigaos*)
++ case $host_cpu in
++ powerpc)
++ # Since July 2007 AmigaOS4 officially supports .so libraries.
++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ ;;
++ m68k)
++ library_names_spec='$libname.ixlibrary $libname.a'
++ # Create ${libname}_ixlibrary.a entries in /sys/libs.
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ ;;
++ esac
+ ;;
+
+-*-*-sco3.2v5*)
+- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+- SAVE_CFLAGS="$CFLAGS"
+- CFLAGS="$CFLAGS -belf"
+- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+- [AC_LANG_PUSH(C)
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+- AC_LANG_POP])
+- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+- CFLAGS="$SAVE_CFLAGS"
+- fi
++beos*)
++ library_names_spec='${libname}${shared_ext}'
++ dynamic_linker="$host_os ld.so"
++ shlibpath_var=LIBRARY_PATH
+ ;;
+-sparc*-*solaris*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *64-bit*)
+- case $lt_cv_prog_gnu_ld in
+- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+- *)
+- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+- LD="${LD-ld} -64"
+- fi
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
++
++bsdi[[45]]*)
++ version_type=linux
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++ # the default ld.so.conf also contains /usr/contrib/lib and
++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++ # libtool to hard-code these into programs
+ ;;
+-esac
+
+-need_locks="$enable_libtool_lock"
+-])# _LT_ENABLE_LOCK
++cygwin* | mingw* | pw32* | cegcc*)
++ version_type=windows
++ shrext_cmds=".dll"
++ need_version=no
++ need_lib_prefix=no
+
++ case $GCC,$host_os in
++ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ library_names_spec='$libname.dll.a'
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname~
++ chmod a+x \$dldir/$dlname~
++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
++ fi'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
+
+-# _LT_CMD_OLD_ARCHIVE
+-# -------------------
+-m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
++ case $host_os in
++ cygwin*)
++ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++ ;;
++ mingw* | cegcc*)
++ # MinGW DLLs use traditional 'lib' prefix
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH printed by
++ # mingw gcc, but we are running on Cygwin. Gcc prints its search
++ # path with ; separators, and with drive letters. We can handle the
++ # drive letters (cygwin fileutils understands them), so leave them,
++ # especially as we might pass files found there to a mingw objdump,
++ # which wouldn't understand a cygwinified path. Ahh.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ ;;
++ pw32*)
++ # pw32 DLLs use 'pw' prefix rather than 'lib'
++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ ;;
++ esac
++ ;;
+
+-AC_CHECK_TOOL(STRIP, strip, :)
+-test -z "$STRIP" && STRIP=:
+-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
++ *)
++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ ;;
++ esac
++ dynamic_linker='Win32 ld.exe'
++ # FIXME: first we should search . and the directory the executable is in
++ shlibpath_var=PATH
++ ;;
+
+-AC_CHECK_TOOL(RANLIB, ranlib, :)
+-test -z "$RANLIB" && RANLIB=:
+-_LT_DECL([], [RANLIB], [1],
+- [Commands used to install an old-style archive])
++darwin* | rhapsody*)
++ dynamic_linker="$host_os dyld"
++ version_type=darwin
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++ soname_spec='${libname}${release}${major}$shared_ext'
++ shlibpath_overrides_runpath=yes
++ shlibpath_var=DYLD_LIBRARY_PATH
++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++ ;;
+
+-# Determine commands to create old-style static archives.
+-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+-old_postinstall_cmds='chmod 644 $oldlib'
+-old_postuninstall_cmds=
++dgux*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
+
+-if test -n "$RANLIB"; then
++freebsd1*)
++ dynamic_linker=no
++ ;;
++
++freebsd* | dragonfly*)
++ # DragonFly does not have aout. When/if they implement a new
++ # versioning mechanism, adjust this.
++ if test -x /usr/bin/objformat; then
++ objformat=`/usr/bin/objformat`
++ else
++ case $host_os in
++ freebsd[[123]]*) objformat=aout ;;
++ *) objformat=elf ;;
++ esac
++ fi
++ version_type=freebsd-$objformat
++ case $version_type in
++ freebsd-elf*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ need_version=no
++ need_lib_prefix=no
++ ;;
++ freebsd-*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++ need_version=yes
++ ;;
++ esac
++ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+- openbsd*)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++ freebsd2*)
++ shlibpath_overrides_runpath=yes
+ ;;
+- *)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++ *) # from 4.6 on, and DragonFly
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
+ ;;
+ esac
+- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+-fi
+-_LT_DECL([], [old_postinstall_cmds], [2])
+-_LT_DECL([], [old_postuninstall_cmds], [2])
+-_LT_TAGDECL([], [old_archive_cmds], [2],
+- [Commands used to build an old-style archive])
+-])# _LT_CMD_OLD_ARCHIVE
++ ;;
+
+-
+-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([_LT_COMPILER_OPTION],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+- lt_compiler_flag="$3"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- # The option is referenced via a variable to avoid confusing sed.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>conftest.err)
+- ac_status=$?
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s "$ac_outfile"; then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings other than the usual output.
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- fi
+- $RM conftest*
+-])
+-
+-if test x"[$]$2" = xyes; then
+- m4_if([$5], , :, [$5])
+-else
+- m4_if([$6], , :, [$6])
+-fi
+-])# _LT_COMPILER_OPTION
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+-
+-
+-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------
+-# Check whether the given linker option works
+-AC_DEFUN([_LT_LINKER_OPTION],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS $3"
+- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+- # The linker can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- if test -s conftest.err; then
+- # Append any errors to the config.log.
+- cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- else
+- $2=yes
+- fi
+- fi
+- $RM -r conftest*
+- LDFLAGS="$save_LDFLAGS"
+-])
+-
+-if test x"[$]$2" = xyes; then
+- m4_if([$4], , :, [$4])
+-else
+- m4_if([$5], , :, [$5])
+-fi
+-])# _LT_LINKER_OPTION
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+-
+-
+-# LT_CMD_MAX_LEN
+-#---------------
+-AC_DEFUN([LT_CMD_MAX_LEN],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-# find the maximum length of command line arguments
+-AC_MSG_CHECKING([the maximum length of command line arguments])
+-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+- i=0
+- teststring="ABCD"
+-
+- case $build_os in
+- msdosdjgpp*)
+- # On DJGPP, this test can blow up pretty badly due to problems in libc
+- # (any single argument exceeding 2000 bytes causes a buffer overrun
+- # during glob expansion). Even if it were fixed, the result of this
+- # check would be larger than it should be.
+- lt_cv_sys_max_cmd_len=12288; # 12K is about right
+- ;;
+-
+- gnu*)
+- # Under GNU Hurd, this test is not required because there is
+- # no limit to the length of command line arguments.
+- # Libtool will interpret -1 as no limit whatsoever
+- lt_cv_sys_max_cmd_len=-1;
+- ;;
+-
+- cygwin* | mingw* | cegcc*)
+- # On Win9x/ME, this test blows up -- it succeeds, but takes
+- # about 5 minutes as the teststring grows exponentially.
+- # Worse, since 9x/ME are not pre-emptively multitasking,
+- # you end up with a "frozen" computer, even though with patience
+- # the test eventually succeeds (with a max line length of 256k).
+- # Instead, let's just punt: use the minimum linelength reported by
+- # all of the supported platforms: 8192 (on NT/2K/XP).
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
+-
+- amigaos*)
+- # On AmigaOS with pdksh, this test takes hours, literally.
+- # So we just punt and use a minimum line length of 8192.
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
+-
+- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+- # This has been around since 386BSD, at least. Likely further.
+- if test -x /sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+- elif test -x /usr/sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+- else
+- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+- fi
+- # And add a safety zone
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- ;;
+-
+- interix*)
+- # We know the value 262144 and hardcode it with a safety zone (like BSD)
+- lt_cv_sys_max_cmd_len=196608
+- ;;
+-
+- osf*)
+- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+- # nice to cause kernel panics so lets avoid the loop below.
+- # First set a reasonable default.
+- lt_cv_sys_max_cmd_len=16384
+- #
+- if test -x /sbin/sysconfig; then
+- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+- *1*) lt_cv_sys_max_cmd_len=-1 ;;
+- esac
+- fi
+- ;;
+- sco3.2v5*)
+- lt_cv_sys_max_cmd_len=102400
+- ;;
+- sysv5* | sco5v6* | sysv4.2uw2*)
+- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+- if test -n "$kargmax"; then
+- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+- else
+- lt_cv_sys_max_cmd_len=32768
+- fi
+- ;;
+- *)
+- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+- if test -n "$lt_cv_sys_max_cmd_len"; then
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- else
+- # Make teststring a little bigger before we do anything with it.
+- # a 1K string should be a reasonable start.
+- for i in 1 2 3 4 5 6 7 8 ; do
+- teststring=$teststring$teststring
+- done
+- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+- # If test is not a shell built-in, we'll probably end up computing a
+- # maximum length that is only half of the actual maximum length, but
+- # we can't tell.
+- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+- test $i != 17 # 1/2 MB should be enough
+- do
+- i=`expr $i + 1`
+- teststring=$teststring$teststring
+- done
+- # Only check the string length outside the loop.
+- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+- teststring=
+- # Add a significant safety factor because C++ compilers can tack on
+- # massive amounts of additional arguments before passing them to the
+- # linker. It appears as though 1/2 is a usable value.
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+- fi
+- ;;
+- esac
+-])
+-if test -n $lt_cv_sys_max_cmd_len ; then
+- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+-else
+- AC_MSG_RESULT(none)
+-fi
+-max_cmd_len=$lt_cv_sys_max_cmd_len
+-_LT_DECL([], [max_cmd_len], [0],
+- [What is the maximum length of a command?])
+-])# LT_CMD_MAX_LEN
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+-
+-
+-# _LT_HEADER_DLFCN
+-# ----------------
+-m4_defun([_LT_HEADER_DLFCN],
+-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+-])# _LT_HEADER_DLFCN
+-
+-
+-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+-# ----------------------------------------------------------------
+-m4_defun([_LT_TRY_DLOPEN_SELF],
+-[m4_require([_LT_HEADER_DLFCN])dnl
+-if test "$cross_compiling" = yes; then :
+- [$4]
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
+-#include "confdefs.h"
+-
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+-
+-#include <stdio.h>
+-
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
+-
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
+-
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
+-
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
+- else
+- puts (dlerror ());
+-
+- return status;
+-}]
+-_LT_EOF
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) $1 ;;
+- x$lt_dlneed_uscore) $2 ;;
+- x$lt_dlunknown|x*) $3 ;;
+- esac
+- else :
+- # compilation failed
+- $3
+- fi
+-fi
+-rm -fr conftest*
+-])# _LT_TRY_DLOPEN_SELF
+-
+-
+-# LT_SYS_DLOPEN_SELF
+-# ------------------
+-AC_DEFUN([LT_SYS_DLOPEN_SELF],
+-[m4_require([_LT_HEADER_DLFCN])dnl
+-if test "x$enable_dlopen" != xyes; then
+- enable_dlopen=unknown
+- enable_dlopen_self=unknown
+- enable_dlopen_self_static=unknown
+-else
+- lt_cv_dlopen=no
+- lt_cv_dlopen_libs=
+-
+- case $host_os in
+- beos*)
+- lt_cv_dlopen="load_add_on"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ;;
+-
+- mingw* | pw32* | cegcc*)
+- lt_cv_dlopen="LoadLibrary"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- cygwin*)
+- lt_cv_dlopen="dlopen"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- darwin*)
+- # if libdl is installed we need to link against it
+- AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+- lt_cv_dlopen="dyld"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ])
+- ;;
+-
+- *)
+- AC_CHECK_FUNC([shl_load],
+- [lt_cv_dlopen="shl_load"],
+- [AC_CHECK_LIB([dld], [shl_load],
+- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+- [AC_CHECK_FUNC([dlopen],
+- [lt_cv_dlopen="dlopen"],
+- [AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+- [AC_CHECK_LIB([svld], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+- [AC_CHECK_LIB([dld], [dld_link],
+- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+- ])
+- ])
+- ])
+- ])
+- ])
+- ;;
+- esac
+-
+- if test "x$lt_cv_dlopen" != xno; then
+- enable_dlopen=yes
+- else
+- enable_dlopen=no
+- fi
+-
+- case $lt_cv_dlopen in
+- dlopen)
+- save_CPPFLAGS="$CPPFLAGS"
+- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+-
+- save_LDFLAGS="$LDFLAGS"
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+-
+- save_LIBS="$LIBS"
+- LIBS="$lt_cv_dlopen_libs $LIBS"
+-
+- AC_CACHE_CHECK([whether a program can dlopen itself],
+- lt_cv_dlopen_self, [dnl
+- _LT_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+- ])
+-
+- if test "x$lt_cv_dlopen_self" = xyes; then
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+- lt_cv_dlopen_self_static, [dnl
+- _LT_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+- ])
+- fi
+-
+- CPPFLAGS="$save_CPPFLAGS"
+- LDFLAGS="$save_LDFLAGS"
+- LIBS="$save_LIBS"
+- ;;
+- esac
+-
+- case $lt_cv_dlopen_self in
+- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+- *) enable_dlopen_self=unknown ;;
+- esac
+-
+- case $lt_cv_dlopen_self_static in
+- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+- *) enable_dlopen_self_static=unknown ;;
+- esac
+-fi
+-_LT_DECL([dlopen_support], [enable_dlopen], [0],
+- [Whether dlopen is supported])
+-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+- [Whether dlopen of programs is supported])
+-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+- [Whether dlopen of statically linked programs is supported])
+-])# LT_SYS_DLOPEN_SELF
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+-
+-
+-# _LT_COMPILER_C_O([TAGNAME])
+-# ---------------------------
+-# Check to see if options -c and -o are simultaneously supported by compiler.
+-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+-m4_defun([_LT_COMPILER_C_O],
+-[m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+- $RM -r conftest 2>/dev/null
+- mkdir conftest
+- cd conftest
+- mkdir out
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- lt_compiler_flag="-o out/conftest2.$ac_objext"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>out/conftest.err)
+- ac_status=$?
+- cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s out/conftest2.$ac_objext
+- then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+- fi
+- fi
+- chmod u+w . 2>&AS_MESSAGE_LOG_FD
+- $RM conftest*
+- # SGI C++ compiler will create directory out/ii_files/ for
+- # template instantiation
+- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+- $RM out/* && rmdir out
+- cd ..
+- $RM -r conftest
+- $RM conftest*
+-])
+-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+- [Does compiler simultaneously support -c and -o options?])
+-])# _LT_COMPILER_C_O
+-
+-
+-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+-# ----------------------------------
+-# Check to see if we can do hard links to lock some files if needed
+-m4_defun([_LT_COMPILER_FILE_LOCKS],
+-[m4_require([_LT_ENABLE_LOCK])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-_LT_COMPILER_C_O([$1])
+-
+-hard_links="nottested"
+-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+- # do not overwrite the value of need_locks provided by the user
+- AC_MSG_CHECKING([if we can lock with hard links])
+- hard_links=yes
+- $RM conftest*
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- touch conftest.a
+- ln conftest.a conftest.b 2>&5 || hard_links=no
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- AC_MSG_RESULT([$hard_links])
+- if test "$hard_links" = no; then
+- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+- need_locks=warn
+- fi
+-else
+- need_locks=no
+-fi
+-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+-])# _LT_COMPILER_FILE_LOCKS
+-
+-
+-# _LT_CHECK_OBJDIR
+-# ----------------
+-m4_defun([_LT_CHECK_OBJDIR],
+-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+-[rm -f .libs 2>/dev/null
+-mkdir .libs 2>/dev/null
+-if test -d .libs; then
+- lt_cv_objdir=.libs
+-else
+- # MS-DOS does not allow filenames that begin with a dot.
+- lt_cv_objdir=_libs
+-fi
+-rmdir .libs 2>/dev/null])
+-objdir=$lt_cv_objdir
+-_LT_DECL([], [objdir], [0],
+- [The name of the directory that contains temporary libtool files])dnl
+-m4_pattern_allow([LT_OBJDIR])dnl
+-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+-])# _LT_CHECK_OBJDIR
+-
+-
+-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+-# --------------------------------------
+-# Check hardcoding attributes.
+-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+-[AC_MSG_CHECKING([how to hardcode library paths into programs])
+-_LT_TAGVAR(hardcode_action, $1)=
+-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+- test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+-
+- # We can hardcode non-existent directories.
+- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+- # If the only mechanism to avoid hardcoding is shlibpath_var, we
+- # have to relink, otherwise we might link with an installed library
+- # when we should be linking with a yet-to-be-installed one
+- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+- # Linking always hardcodes the temporary library directory.
+- _LT_TAGVAR(hardcode_action, $1)=relink
+- else
+- # We can link without hardcoding, and we can hardcode nonexisting dirs.
+- _LT_TAGVAR(hardcode_action, $1)=immediate
+- fi
+-else
+- # We cannot hardcode anything, or else we can only hardcode existing
+- # directories.
+- _LT_TAGVAR(hardcode_action, $1)=unsupported
+-fi
+-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+-
+-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+- # Fast installation is not supported
+- enable_fast_install=no
+-elif test "$shlibpath_overrides_runpath" = yes ||
+- test "$enable_shared" = no; then
+- # Fast installation is not necessary
+- enable_fast_install=needless
+-fi
+-_LT_TAGDECL([], [hardcode_action], [0],
+- [How to hardcode a shared library path into an executable])
+-])# _LT_LINKER_HARDCODE_LIBPATH
+-
+-
+-# _LT_CMD_STRIPLIB
+-# ----------------
+-m4_defun([_LT_CMD_STRIPLIB],
+-[m4_require([_LT_DECL_EGREP])
+-striplib=
+-old_striplib=
+-AC_MSG_CHECKING([whether stripping libraries is possible])
+-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- AC_MSG_RESULT([yes])
+-else
+-# FIXME - insert some real tests, host_os isn't really good enough
+- case $host_os in
+- darwin*)
+- if test -n "$STRIP" ; then
+- striplib="$STRIP -x"
+- old_striplib="$STRIP -S"
+- AC_MSG_RESULT([yes])
+- else
+- AC_MSG_RESULT([no])
+- fi
+- ;;
+- *)
+- AC_MSG_RESULT([no])
+- ;;
+- esac
+-fi
+-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+-_LT_DECL([], [striplib], [1])
+-])# _LT_CMD_STRIPLIB
+-
+-
+-# _LT_SYS_DYNAMIC_LINKER([TAG])
+-# -----------------------------
+-# PORTME Fill in your ld.so characteristics
+-m4_defun([_LT_SYS_DYNAMIC_LINKER],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_OBJDUMP])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_MSG_CHECKING([dynamic linker characteristics])
+-m4_if([$1],
+- [], [
+-if test "$GCC" = yes; then
+- case $host_os in
+- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+- *) lt_awk_arg="/^libraries:/" ;;
+- esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+- # if the path contains ";" then we assume it to be the separator
+- # otherwise default to the standard path separator (i.e. ":") - it is
+- # assumed that no part of a normal pathname contains ";" but that should
+- # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- # Ok, now we have the path, separated by spaces, we can step through it
+- # and add multilib dir if necessary.
+- lt_tmp_lt_search_path_spec=
+- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+- for lt_sys_path in $lt_search_path_spec; do
+- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+- else
+- test -d "$lt_sys_path" && \
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+- fi
+- done
+- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+-BEGIN {RS=" "; FS="/|\n";} {
+- lt_foo="";
+- lt_count=0;
+- for (lt_i = NF; lt_i > 0; lt_i--) {
+- if ($lt_i != "" && $lt_i != ".") {
+- if ($lt_i == "..") {
+- lt_count++;
+- } else {
+- if (lt_count == 0) {
+- lt_foo="/" $lt_i lt_foo;
+- } else {
+- lt_count--;
+- }
+- }
+- }
+- }
+- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+-}'`
+- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+-else
+- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+-fi])
+-library_names_spec=
+-libname_spec='lib$name'
+-soname_spec=
+-shrext_cmds=".so"
+-postinstall_cmds=
+-postuninstall_cmds=
+-finish_cmds=
+-finish_eval=
+-shlibpath_var=
+-shlibpath_overrides_runpath=unknown
+-version_type=none
+-dynamic_linker="$host_os ld.so"
+-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-need_lib_prefix=unknown
+-hardcode_into_libs=no
+-
+-# when you set need_version to no, make sure it does not cause -set_version
+-# flags to be left without arguments
+-need_version=unknown
+-
+-case $host_os in
+-aix3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+- shlibpath_var=LIBPATH
+-
+- # AIX 3 has no versioning support, so we append a major version to the name.
+- soname_spec='${libname}${release}${shared_ext}$major'
+- ;;
+-
+-aix[[4-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- hardcode_into_libs=yes
+- if test "$host_cpu" = ia64; then
+- # AIX 5 supports IA64
+- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- else
+- # With GCC up to 2.95.x, collect2 would create an import file
+- # for dependence libraries. The import file would start with
+- # the line `#! .'. This would cause the generated library to
+- # depend on `.', always an invalid library. This was fixed in
+- # development snapshots of GCC prior to 3.0.
+- case $host_os in
+- aix4 | aix4.[[01]] | aix4.[[01]].*)
+- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+- echo ' yes '
+- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+- :
+- else
+- can_build_shared=no
+- fi
+- ;;
+- esac
+- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+- # soname into executable. Probably we can add versioning support to
+- # collect2, so additional links can be useful in future.
+- if test "$aix_use_runtimelinking" = yes; then
+- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+- # instead of lib<name>.a to let people know that these are not
+- # typical AIX shared libraries.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- else
+- # We preserve .a as extension for shared libraries through AIX4.2
+- # and later when we are not doing run time linking.
+- library_names_spec='${libname}${release}.a $libname.a'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- fi
+- shlibpath_var=LIBPATH
+- fi
+- ;;
+-
+-amigaos*)
+- case $host_cpu in
+- powerpc)
+- # Since July 2007 AmigaOS4 officially supports .so libraries.
+- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- ;;
+- m68k)
+- library_names_spec='$libname.ixlibrary $libname.a'
+- # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+- ;;
+- esac
+- ;;
+-
+-beos*)
+- library_names_spec='${libname}${shared_ext}'
+- dynamic_linker="$host_os ld.so"
+- shlibpath_var=LIBRARY_PATH
+- ;;
+-
+-bsdi[[45]]*)
+- version_type=linux
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+- # the default ld.so.conf also contains /usr/contrib/lib and
+- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+- # libtool to hard-code these into programs
+- ;;
+-
+-cygwin* | mingw* | pw32* | cegcc*)
+- version_type=windows
+- shrext_cmds=".dll"
+- need_version=no
+- need_lib_prefix=no
+-
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+- library_names_spec='$libname.dll.a'
+- # DLL is installed to $(libdir)/../bin by postinstall_cmds
+- postinstall_cmds='base_file=`basename \${file}`~
+- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+- dldir=$destdir/`dirname \$dlpath`~
+- test -d \$dldir || mkdir -p \$dldir~
+- $install_prog $dir/$dlname \$dldir/$dlname~
+- chmod a+x \$dldir/$dlname~
+- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+- fi'
+- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+- dlpath=$dir/\$dldll~
+- $RM \$dlpath'
+- shlibpath_overrides_runpath=yes
+-
+- case $host_os in
+- cygwin*)
+- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+- ;;
+- mingw* | cegcc*)
+- # MinGW DLLs use traditional 'lib' prefix
+- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- ;;
+- pw32*)
+- # pw32 DLLs use 'pw' prefix rather than 'lib'
+- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- ;;
+- esac
+- ;;
+-
+- *)
+- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+- ;;
+- esac
+- dynamic_linker='Win32 ld.exe'
+- # FIXME: first we should search . and the directory the executable is in
+- shlibpath_var=PATH
+- ;;
+-
+-darwin* | rhapsody*)
+- dynamic_linker="$host_os dyld"
+- version_type=darwin
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+- soname_spec='${libname}${release}${major}$shared_ext'
+- shlibpath_overrides_runpath=yes
+- shlibpath_var=DYLD_LIBRARY_PATH
+- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+-m4_if([$1], [],[
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+- ;;
+-
+-dgux*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+-
+-freebsd1*)
+- dynamic_linker=no
+- ;;
+-
+-freebsd* | dragonfly*)
+- # DragonFly does not have aout. When/if they implement a new
+- # versioning mechanism, adjust this.
+- if test -x /usr/bin/objformat; then
+- objformat=`/usr/bin/objformat`
+- else
+- case $host_os in
+- freebsd[[123]]*) objformat=aout ;;
+- *) objformat=elf ;;
+- esac
+- fi
+- version_type=freebsd-$objformat
+- case $version_type in
+- freebsd-elf*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- need_version=no
+- need_lib_prefix=no
+- ;;
+- freebsd-*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+- need_version=yes
+- ;;
+- esac
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_os in
+- freebsd2*)
+- shlibpath_overrides_runpath=yes
+- ;;
+- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+- *) # from 4.6 on, and DragonFly
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- esac
+- ;;
+-
+-gnu*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- hardcode_into_libs=yes
+- ;;
++gnu*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ hardcode_into_libs=yes
++ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+@@ -3430,7 +2460,7 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+@@ -3470,6 +2500,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -76,257 +5395,15698 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -2421,7 +2433,7 @@
+@@ -4057,11 +3099,11 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
-@@ -3455,7 +3467,7 @@
+@@ -4678,7 +3720,7 @@
+ ;;
+ esac
;;
- esac
- ;;
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
-@@ -5136,7 +5148,7 @@
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+@@ -4742,7 +3784,7 @@
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
-@@ -5511,6 +5523,9 @@
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+@@ -4962,7 +4004,7 @@
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+@@ -5167,6 +4209,9 @@
+ cygwin* | mingw* | cegcc*)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
;;
+ linux* | k*bsd*-gnu)
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
-@@ -5716,12 +5731,13 @@
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+@@ -5215,65 +4260,432 @@
+ dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+- case $host_os in
+- cygwin* | mingw* | pw32* | cegcc*)
+- # FIXME: the MSVC++ port hasn't been tested in a loooong time
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- if test "$GCC" != yes; then
+- with_gnu_ld=no
+- fi
+- ;;
+- interix*)
+- # we just hope/assume this is gcc and not c89 (= MSVC++)
+- with_gnu_ld=yes
+- ;;
+- openbsd*)
+- with_gnu_ld=no
+- ;;
+- esac
++ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ # FIXME: the MSVC++ port hasn't been tested in a loooong time
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ if test "$GCC" != yes; then
++ with_gnu_ld=no
++ fi
++ ;;
++ interix*)
++ # we just hope/assume this is gcc and not c89 (= MSVC++)
++ with_gnu_ld=yes
++ ;;
++ openbsd*)
++ with_gnu_ld=no
++ ;;
++ linux* | k*bsd*-gnu)
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ ;;
++ esac
++
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ if test "$with_gnu_ld" = yes; then
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ wlarc='${wl}'
++
++ # Set some defaults for GNU ld with shared library support. These
++ # are reset later if shared libraries are not supported. Putting them
++ # here allows them to be overridden if necessary.
++ runpath_var=LD_RUN_PATH
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ supports_anon_versioning=no
++ case `$LD -v 2>&1` in
++ *GNU\ gold*) supports_anon_versioning=yes ;;
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++ *\ 2.11.*) ;; # other 2.11 versions
++ *) supports_anon_versioning=yes ;;
++ esac
++
++ # See if GNU ld supports shared libraries.
++ case $host_os in
++ aix[[3-9]]*)
++ # On AIX/PPC, the GNU linker is very broken
++ if test "$host_cpu" != ia64; then
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support. If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++_LT_EOF
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)=''
++ ;;
++ m68k)
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ ;;
++ esac
++ ;;
++
++ beos*)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ cygwin* | mingw* | pw32* | cegcc*)
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ interix[[3-9]]*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++ tmp_diet=no
++ if test "$host_os" = linux-dietlibc; then
++ case $cc_basename in
++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
++ esac
++ fi
++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
++ && test "$tmp_diet" = no
++ then
++ tmp_addflag=
++ tmp_sharedflag='-shared'
++ case $cc_basename,$host_cpu in
++ pgcc*) # Portland Group C compiler
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag'
++ ;;
++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag -Mnomain' ;;
++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
++ tmp_addflag=' -i_dynamic' ;;
++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
++ tmp_addflag=' -i_dynamic -nofor_main' ;;
++ ifc* | ifort*) # Intel Fortran compiler
++ tmp_addflag=' -nofor_main' ;;
++ lf95*) # Lahey Fortran 8.1
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ tmp_sharedflag='--shared' ;;
++ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++ tmp_sharedflag='-qmkshrobj'
++ tmp_addflag= ;;
++ esac
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*) # Sun C 5.9
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++ tmp_sharedflag='-G' ;;
++ *Sun\ F*) # Sun Fortran 8.3
++ tmp_sharedflag='-G' ;;
++ esac
++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++ if test "x$supports_anon_versioning" = xyes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++
++ case $cc_basename in
++ xlf*)
++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ if test "x$supports_anon_versioning" = xyes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ fi
++ ;;
++ esac
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++ wlarc=
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ fi
++ ;;
+
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- if test "$with_gnu_ld" = yes; then
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- wlarc='${wl}'
++ solaris*)
++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
+
+- # Set some defaults for GNU ld with shared library support. These
+- # are reset later if shared libraries are not supported. Putting them
+- # here allows them to be overridden if necessary.
+- runpath_var=LD_RUN_PATH
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- supports_anon_versioning=no
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+- *\ 2.11.*) ;; # other 2.11 versions
+- *) supports_anon_versioning=yes ;;
+- esac
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
+
+- # See if GNU ld supports shared libraries.
+- case $host_os in
+- aix[[3-9]]*)
+- # On AIX/PPC, the GNU linker is very broken
+- if test "$host_cpu" != ia64; then
++_LT_EOF
++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++ case `$LD -v 2>&1` in
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+-*** to be unable to reliably create shared libraries on AIX.
+-*** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
+
+ _LT_EOF
++ ;;
++ *)
++ # For security reasons, it is highly recommended that you always
++ # use absolute paths for naming shared libraries, and exclude the
++ # DT_RUNPATH tag from executables and libraries. But doing so
++ # requires that you compile everything twice, which is a pain.
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ sunos4*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ wlarc=
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ *)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++
++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
++ runpath_var=
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ else
++ # PORTME fill in a description of your system's linker (not GNU ld)
++ case $host_os in
++ aix3*)
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++ # Note: this linker hardcodes the directories in LIBPATH if there
++ # are no directories specified by -L.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++ # Neither direct hardcoding nor static linking is supported with a
++ # broken collect2.
++ _LT_TAGVAR(hardcode_direct, $1)=unsupported
++ fi
++ ;;
++
++ aix[[4-9]]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ # If we're using GNU nm, then we don't want the "-C" option.
++ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ else
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ fi
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ ;;
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++ _LT_TAGVAR(archive_cmds, $1)=''
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++ if test "$GCC" = yes; then
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" &&
++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ _LT_TAGVAR(hardcode_direct, $1)=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=
++ fi
++ ;;
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
++
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ _LT_SYS_MODULE_PATH_AIX
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ else
++ if test "$host_cpu" = ia64; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ _LT_SYS_MODULE_PATH_AIX
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ # This is similar to how AIX traditionally builds its shared libraries.
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
fi
;;
+@@ -5292,1351 +4704,1612 @@
+ esac
+ ;;
+
+- beos*)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
++ bsdi[[45]]*)
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ ;;
+
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
++ darwin* | rhapsody*)
++ _LT_DARWIN_LINKER_FEATURES($1)
++ ;;
++
++ dgux*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ freebsd1*)
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++ # support. Future versions do this automatically, but an explicit c++rt0.o
++ # does not break anything, and helps significantly (at the cost of a little
++ # extra space).
++ freebsd2.2*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++ freebsd2*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++ freebsd* | dragonfly*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ hpux9*)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ ;;
++
++ hpux10*)
++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ fi
++ ;;
++
++ hpux11*)
++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ else
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ case $host_cpu in
++ hppa*64*|ia64*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++ *)
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ ;;
++ esac
++ fi
++ ;;
++
++ irix5* | irix6* | nonstopux*)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ # Try to use the -exported_symbol ld option, if it does not
++ # work, assume that -exports_file does not work either and
++ # implicitly export all symbols.
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ AC_LINK_IFELSE(int foo(void) {},
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ )
++ LDFLAGS="$save_LDFLAGS"
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(inherit_rpath, $1)=yes
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
++ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ newsos6)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ *nto* | *qnx*)
++ ;;
++
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ case $host_os in
++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+- interix[[3-9]]*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ os2*)
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+- gnu* | linux* | tpf* | k*bsd*-gnu)
+- tmp_diet=no
+- if test "$host_os" = linux-dietlibc; then
+- case $cc_basename in
+- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+- esac
++ osf3*)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+- && test "$tmp_diet" = no
+- then
+- tmp_addflag=
+- tmp_sharedflag='-shared'
+- case $cc_basename,$host_cpu in
+- pgcc*) # Portland Group C compiler
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag'
+- ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag -Mnomain' ;;
+- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+- tmp_addflag=' -i_dynamic' ;;
+- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+- tmp_addflag=' -i_dynamic -nofor_main' ;;
+- ifc* | ifort*) # Intel Fortran compiler
+- tmp_addflag=' -nofor_main' ;;
+- lf95*) # Lahey Fortran 8.1
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- tmp_sharedflag='--shared' ;;
+- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+- tmp_sharedflag='-qmkshrobj'
+- tmp_addflag= ;;
+- esac
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*) # Sun C 5.9
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- _LT_TAGVAR(compiler_needs_object, $1)=yes
+- tmp_sharedflag='-G' ;;
+- *Sun\ F*) # Sun Fortran 8.3
+- tmp_sharedflag='-G' ;;
+- esac
+- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ ;;
+
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
++ osf4* | osf5*) # as osf3* with the addition of -msym flag
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ else
++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+- case $cc_basename in
+- xlf*)
+- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+- fi
++ # Both c and cxx compiler support -rpath directly
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ ;;
++
++ solaris*)
++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
++ if test "$GCC" = yes; then
++ wlarc='${wl}'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ else
++ case `$CC -V 2>&1` in
++ *"Compilers 5.0"*)
++ wlarc=''
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
++ ;;
++ *)
++ wlarc='${wl}'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'. GCC discards it without `$wl',
++ # but is careful enough not to reorder.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ fi
++ ;;
++ esac
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
-@@ -6153,7 +6169,7 @@
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+- wlarc=
++ sunos4*)
++ if test "x$host_vendor" = xsequent; then
++ # Use $CC to link under sequent, because it throws in some extra .o
++ # files that make .init and .fini sections work.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
+- solaris*)
+- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
++ sysv4)
++ case $host_vendor in
++ sni)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
++ ;;
++ siemens)
++ ## LD is ld it makes a PLAMLIB
++ ## CC just makes a GrossModule.
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ ;;
++ motorola)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
++ ;;
++ esac
++ runpath_var='LD_RUN_PATH'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
+
+-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+-*** create shared libraries on Solaris systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.9.1 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
++ sysv4.3*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
++ ;;
+
+-_LT_EOF
+- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var=LD_RUN_PATH
++ hardcode_runpath_var=yes
++ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
+
+-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+-*** reliably create shared libraries on SCO systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
++ ;;
+
+-_LT_EOF
+- ;;
+- *)
+- # For security reasons, it is highly recommended that you always
+- # use absolute paths for naming shared libraries, and exclude the
+- # DT_RUNPATH tag from executables and libraries. But doing so
+- # requires that you compile everything twice, which is a pain.
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
++
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
+ ;;
+
+- sunos4*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- wlarc=
+- _LT_TAGVAR(hardcode_direct, $1)=yes
++ uts4*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
++ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+- runpath_var=
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ if test x$host_vendor = xsni; then
++ case $host in
++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
++ ;;
++ esac
+ fi
+- else
+- # PORTME fill in a description of your system's linker (not GNU ld)
+- case $host_os in
+- aix3*)
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+- # Note: this linker hardcodes the directories in LIBPATH if there
+- # are no directories specified by -L.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+- # Neither direct hardcoding nor static linking is supported with a
+- # broken collect2.
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- fi
+- ;;
+-
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- fi
+- aix_use_runtimelinking=no
++ fi
++])
++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+- aix_use_runtimelinking=yes
+- break
+- fi
+- done
+- ;;
+- esac
++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
++_LT_DECL([], [extract_expsyms_cmds], [2],
++ [The commands to extract the exported symbol list from a shared archive])
+
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++#
++# Do we need to explicitly link libc?
++#
++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
++x|xyes)
++ # Assume -lc should be added
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+- _LT_TAGVAR(archive_cmds, $1)=''
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++ if test "$enable_shared" = yes && test "$GCC" = yes; then
++ case $_LT_TAGVAR(archive_cmds, $1) in
++ *'~'*)
++ # FIXME: we may have to deal with multi-command sequences.
++ ;;
++ '$CC '*)
++ # Test whether the compiler implicitly links with -lc since on some
++ # systems, -lgcc has to come before -lc. If gcc already passes -lc
++ # to ld, don't add -lc before -lgcc.
++ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
++ $RM conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+- if test "$GCC" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" &&
+- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- ;;
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++ _LT_TAGVAR(allow_undefined_flag, $1)=
++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++ then
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ else
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ fi
++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
++ cat conftest.err 1>&5
+ fi
++ $RM conftest*
++ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
++ ;;
++ esac
++ fi
++ ;;
++esac
++
++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
++ [Whether or not to add -lc for building shared libraries])
++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
++ [enable_shared_with_static_runtimes], [0],
++ [Whether or not to disallow shared libs when runtime libs are static])
++_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
++ [Compiler flag to allow reflexive dlopens])
++_LT_TAGDECL([], [whole_archive_flag_spec], [1],
++ [Compiler flag to generate shared objects directly from archives])
++_LT_TAGDECL([], [compiler_needs_object], [1],
++ [Whether the compiler copes with passing no objects directly])
++_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
++ [Create an old-style archive from a shared archive])
++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
++ [Create a temporary old-style archive to link instead of a shared archive])
++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
++_LT_TAGDECL([], [archive_expsym_cmds], [2])
++_LT_TAGDECL([], [module_cmds], [2],
++ [Commands used to build a loadable module if different from building
++ a shared archive.])
++_LT_TAGDECL([], [module_expsym_cmds], [2])
++_LT_TAGDECL([], [with_gnu_ld], [1],
++ [Whether we are building with GNU ld or not])
++_LT_TAGDECL([], [allow_undefined_flag], [1],
++ [Flag that allows shared libraries with undefined symbols to be built])
++_LT_TAGDECL([], [no_undefined_flag], [1],
++ [Flag that enforces no undefined symbols])
++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
++ [Flag to hardcode $libdir into a binary during linking.
++ This must work even if $libdir does not exist])
++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
++ [[If ld is used when linking, flag to hardcode $libdir into a binary
++ during linking. This must work even if $libdir does not exist]])
++_LT_TAGDECL([], [hardcode_libdir_separator], [1],
++ [Whether we need a single "-rpath" flag with a separated argument])
++_LT_TAGDECL([], [hardcode_direct], [0],
++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++ DIR into the resulting binary])
++_LT_TAGDECL([], [hardcode_direct_absolute], [0],
++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++ DIR into the resulting binary and the resulting library dependency is
++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
++ library is relocated])
++_LT_TAGDECL([], [hardcode_minus_L], [0],
++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
++ into the resulting binary])
++_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
++ into the resulting binary])
++_LT_TAGDECL([], [hardcode_automatic], [0],
++ [Set to "yes" if building a shared library automatically hardcodes DIR
++ into the library and all subsequent libraries and executables linked
++ against it])
++_LT_TAGDECL([], [inherit_rpath], [0],
++ [Set to yes if linker adds runtime paths of dependent libraries
++ to runtime path list])
++_LT_TAGDECL([], [link_all_deplibs], [0],
++ [Whether libtool must link a program against all its dependency libraries])
++_LT_TAGDECL([], [fix_srcfile_path], [1],
++ [Fix the shell variable $srcfile for the compiler])
++_LT_TAGDECL([], [always_export_symbols], [0],
++ [Set to "yes" if exported symbols are required])
++_LT_TAGDECL([], [export_symbols_cmds], [2],
++ [The commands to list exported symbols])
++_LT_TAGDECL([], [exclude_expsyms], [1],
++ [Symbols that should not be listed in the preloaded symbols])
++_LT_TAGDECL([], [include_expsyms], [1],
++ [Symbols that must always be exported])
++_LT_TAGDECL([], [prelink_cmds], [2],
++ [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [file_list_spec], [1],
++ [Specify filename containing input files])
++dnl FIXME: Not yet implemented
++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
++dnl [Compiler flag to generate thread safe objects])
++])# _LT_LINKER_SHLIBS
+
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to export.
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared libraries.
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
+
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)=''
+- ;;
+- m68k)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- ;;
++# _LT_LANG_C_CONFIG([TAG])
++# ------------------------
++# Ensure that the configuration variables for a C compiler are suitably
++# defined. These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_C_CONFIG],
++[m4_require([_LT_DECL_EGREP])dnl
++lt_save_CC="$CC"
++AC_LANG_PUSH(C)
+
+- bsdi[[45]]*)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+- ;;
++# Source file extension for C test sources.
++ac_ext=c
+
+- cygwin* | mingw* | pw32* | cegcc*)
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- # hardcode_libdir_flag_spec is actually meaningless, as there is
+- # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- ;;
++# Object file extension for compiled C test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
+
+- darwin* | rhapsody*)
+- _LT_DARWIN_LINKER_FEATURES($1)
+- ;;
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
+
+- dgux*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
+
+- freebsd1*)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
++_LT_TAG_COMPILER
++# Save the default compiler, since it gets overwritten when the other
++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
++compiler_DEFAULT=$CC
+
+- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+- # support. Future versions do this automatically, but an explicit c++rt0.o
+- # does not break anything, and helps significantly (at the cost of a little
+- # extra space).
+- freebsd2.2*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
+
+- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+- freebsd2*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++if test -n "$compiler"; then
++ _LT_COMPILER_NO_RTTI($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++ LT_SYS_DLOPEN_SELF
++ _LT_CMD_STRIPLIB
+
+- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++ # Report which library types will actually be built
++ AC_MSG_CHECKING([if libtool supports shared libraries])
++ AC_MSG_RESULT([$can_build_shared])
+
+- hpux9*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_direct, $1)=yes
++ AC_MSG_CHECKING([whether to build shared libraries])
++ test "$can_build_shared" = "no" && enable_shared=no
+
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
+
+- hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- fi
+- ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ AC_MSG_RESULT([$enable_shared])
+
+- hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- else
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ AC_MSG_CHECKING([whether to build static libraries])
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ AC_MSG_RESULT([$enable_static])
++
++ _LT_CONFIG($1)
++fi
++AC_LANG_POP
++CC="$lt_save_CC"
++])# _LT_LANG_C_CONFIG
+
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- fi
+- ;;
++# _LT_PROG_CXX
++# ------------
++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
++# compiler, we have our own version here.
++m4_defun([_LT_PROG_CXX],
++[
++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
++AC_PROG_CXX
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++else
++ _lt_caught_CXX_error=yes
++fi
++popdef([AC_MSG_ERROR])
++])# _LT_PROG_CXX
+
+- irix5* | irix6* | nonstopux*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- # Try to use the -exported_symbol ld option, if it does not
+- # work, assume that -exports_file does not work either and
+- # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(inherit_rpath, $1)=yes
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([_LT_PROG_CXX], [])
+
- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+
+- newsos6)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++# _LT_LANG_CXX_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a C++ compiler are suitably
++# defined. These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_CXX_CONFIG],
++[AC_REQUIRE([_LT_PROG_CXX])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
+
+- *nto* | *qnx*)
+- ;;
++AC_LANG_PUSH(C++)
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(compiler_needs_object, $1)=no
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- else
+- case $host_os in
+- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- ;;
+- esac
+- fi
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++# Source file extension for C++ test sources.
++ac_ext=cpp
+
+- os2*)
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+- ;;
++# Object file extension for compiled C++ test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
+
+- osf3*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
++# No sense in running all these tests if we already determined that
++# the CXX compiler isn't working. Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_caught_CXX_error" != yes; then
++ # Code to be used in simple compile tests
++ lt_simple_compile_test_code="int some_variable = 0;"
+
+- osf4* | osf5*) # as osf3* with the addition of -msym flag
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- else
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++ # Code to be used in simple link tests
++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+- # Both c and cxx compiler support -rpath directly
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
++ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++ _LT_TAG_COMPILER
+
+- solaris*)
+- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+- if test "$GCC" = yes; then
+- wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+- else
+- case `$CC -V 2>&1` in
+- *"Compilers 5.0"*)
+- wlarc=''
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+- ;;
+- *)
+- wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+- ;;
+- esac
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'. GCC discards it without `$wl',
+- # but is careful enough not to reorder.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- fi
+- ;;
+- esac
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
++ # save warnings/boilerplate of simple test code
++ _LT_COMPILER_BOILERPLATE
++ _LT_LINKER_BOILERPLATE
++
++ # Allow CC to be a program name with arguments.
++ lt_save_CC=$CC
++ lt_save_LD=$LD
++ lt_save_GCC=$GCC
++ GCC=$GXX
++ lt_save_with_gnu_ld=$with_gnu_ld
++ lt_save_path_LD=$lt_cv_path_LD
++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
++ else
++ $as_unset lt_cv_prog_gnu_ld
++ fi
++ if test -n "${lt_cv_path_LDCXX+set}"; then
++ lt_cv_path_LD=$lt_cv_path_LDCXX
++ else
++ $as_unset lt_cv_path_LD
++ fi
++ test -z "${LDCXX+set}" || LD=$LDCXX
++ CC=${CXX-"c++"}
++ compiler=$CC
++ _LT_TAGVAR(compiler, $1)=$CC
++ _LT_CC_BASENAME([$compiler])
++
++ if test -n "$compiler"; then
++ # We don't want -fno-exception when compiling C++ code, so set the
++ # no_builtin_flag separately
++ if test "$GXX" = yes; then
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++ else
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++ fi
+
+- sunos4*)
+- if test "x$host_vendor" = xsequent; then
+- # Use $CC to link under sequent, because it throws in some extra .o
+- # files that make .init and .fini sections work.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++ if test "$GXX" = yes; then
++ # Set up default GNU C++ configuration
+
+- sysv4)
+- case $host_vendor in
+- sni)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+- ;;
+- siemens)
+- ## LD is ld it makes a PLAMLIB
+- ## CC just makes a GrossModule.
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- ;;
+- motorola)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+- ;;
+- esac
+- runpath_var='LD_RUN_PATH'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++ LT_PATH_LD
+
+- sysv4.3*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+- ;;
++ # Check if GNU C++ uses GNU ld as the underlying linker, since the
++ # archiving commands below assume that GNU ld is being used.
++ if test "$with_gnu_ld" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var=LD_RUN_PATH
+- hardcode_runpath_var=yes
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- fi
+- ;;
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++ # investigate it a little bit more. (MM)
++ wlarc='${wl}'
+
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
++ $GREP 'no-whole-archive' > /dev/null; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
else
-@@ -6584,7 +6600,7 @@
- AC_MSG_RESULT([$SED])
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ with_gnu_ld=no
++ wlarc=
++
++ # A generic and very simple default shared library creation
++ # command for GNU C++ for the case where it uses the native
++ # linker, instead of GNU ld. If possible, this setting should
++ # overridden to take advantage of the native linker features on
++ # the platform it is being used on.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+- ;;
+
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
++ else
++ GXX=no
++ with_gnu_ld=no
++ wlarc=
++ fi
+
+- uts4*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
++ # PORTME: fill in a description of your system's C++ link characteristics
++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ case $host_os in
++ aix3*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ aix_use_runtimelinking=no
+
+- *)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ ;;
++ esac
+
+- if test x$host_vendor = xsni; then
+- case $host in
+- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+- ;;
+- esac
+- fi
+- fi
+-])
+-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
+
+-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+-_LT_DECL([], [extract_expsyms_cmds], [2],
+- [The commands to extract the exported symbol list from a shared archive])
++ _LT_TAGVAR(archive_cmds, $1)=''
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+-#
+-# Do we need to explicitly link libc?
+-#
+-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+-x|xyes)
+- # Assume -lc should be added
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ if test "$GXX" = yes; then
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" &&
++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ _LT_TAGVAR(hardcode_direct, $1)=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=
++ fi
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
+
+- if test "$enable_shared" = yes && test "$GCC" = yes; then
+- case $_LT_TAGVAR(archive_cmds, $1) in
+- *'~'*)
+- # FIXME: we may have to deal with multi-command sequences.
+- ;;
+- '$CC '*)
+- # Test whether the compiler implicitly links with -lc since on some
+- # systems, -lgcc has to come before -lc. If gcc already passes -lc
+- # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $RM conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to
++ # export.
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++ # Determine the default libpath from the value encoded in an empty
++ # executable.
++ _LT_SYS_MODULE_PATH_AIX
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ if test "$host_cpu" = ia64; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ _LT_SYS_MODULE_PATH_AIX
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ # This is similar to how AIX traditionally builds its shared
++ # libraries.
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
+ fi
+- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $RM conftest*
+- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+- ;;
+- esac
+- fi
+- ;;
+-esac
++ ;;
+
+-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+- [Whether or not to add -lc for building shared libraries])
+-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+- [enable_shared_with_static_runtimes], [0],
+- [Whether or not to disallow shared libs when runtime libs are static])
+-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+- [Compiler flag to allow reflexive dlopens])
+-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+- [Compiler flag to generate shared objects directly from archives])
+-_LT_TAGDECL([], [compiler_needs_object], [1],
+- [Whether the compiler copes with passing no objects directly])
+-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+- [Create an old-style archive from a shared archive])
+-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+- [Create a temporary old-style archive to link instead of a shared archive])
+-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+-_LT_TAGDECL([], [archive_expsym_cmds], [2])
+-_LT_TAGDECL([], [module_cmds], [2],
+- [Commands used to build a loadable module if different from building
+- a shared archive.])
+-_LT_TAGDECL([], [module_expsym_cmds], [2])
+-_LT_TAGDECL([], [with_gnu_ld], [1],
+- [Whether we are building with GNU ld or not])
+-_LT_TAGDECL([], [allow_undefined_flag], [1],
+- [Flag that allows shared libraries with undefined symbols to be built])
+-_LT_TAGDECL([], [no_undefined_flag], [1],
+- [Flag that enforces no undefined symbols])
+-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+- [Flag to hardcode $libdir into a binary during linking.
+- This must work even if $libdir does not exist])
+-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+- [[If ld is used when linking, flag to hardcode $libdir into a binary
+- during linking. This must work even if $libdir does not exist]])
+-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+- [Whether we need a single "-rpath" flag with a separated argument])
+-_LT_TAGDECL([], [hardcode_direct], [0],
+- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+- DIR into the resulting binary])
+-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+- DIR into the resulting binary and the resulting library dependency is
+- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+- library is relocated])
+-_LT_TAGDECL([], [hardcode_minus_L], [0],
+- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+- into the resulting binary])
+-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+- into the resulting binary])
+-_LT_TAGDECL([], [hardcode_automatic], [0],
+- [Set to "yes" if building a shared library automatically hardcodes DIR
+- into the library and all subsequent libraries and executables linked
+- against it])
+-_LT_TAGDECL([], [inherit_rpath], [0],
+- [Set to yes if linker adds runtime paths of dependent libraries
+- to runtime path list])
+-_LT_TAGDECL([], [link_all_deplibs], [0],
+- [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+-_LT_TAGDECL([], [always_export_symbols], [0],
+- [Set to "yes" if exported symbols are required])
+-_LT_TAGDECL([], [export_symbols_cmds], [2],
+- [The commands to list exported symbols])
+-_LT_TAGDECL([], [exclude_expsyms], [1],
+- [Symbols that should not be listed in the preloaded symbols])
+-_LT_TAGDECL([], [include_expsyms], [1],
+- [Symbols that must always be exported])
+-_LT_TAGDECL([], [prelink_cmds], [2],
+- [Commands necessary for linking programs (against libraries) with templates])
+-_LT_TAGDECL([], [file_list_spec], [1],
+- [Specify filename containing input files])
+-dnl FIXME: Not yet implemented
+-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+-dnl [Compiler flag to generate thread safe objects])
+-])# _LT_LINKER_SHLIBS
++ beos*)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
+
++ chorus*)
++ case $cc_basename in
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
+
+-# _LT_LANG_C_CONFIG([TAG])
+-# ------------------------
+-# Ensure that the configuration variables for a C compiler are suitably
+-# defined. These variables are subsequently used by _LT_CONFIG to write
+-# the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_C_CONFIG],
+-[m4_require([_LT_DECL_EGREP])dnl
+-lt_save_CC="$CC"
+-AC_LANG_PUSH(C)
++ cygwin* | mingw* | pw32* | cegcc*)
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+-# Source file extension for C test sources.
+-ac_ext=c
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ darwin* | rhapsody*)
++ _LT_DARWIN_LINKER_FEATURES($1)
++ ;;
+
+-# Object file extension for compiled C test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
++ dgux*)
++ case $cc_basename in
++ ec++*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ ghcx*)
++ # Green Hills C++ Compiler
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;"
++ freebsd[[12]]*)
++ # C++ shared libraries reported to be fairly broken before
++ # switch to ELF
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='int main(){return(0);}'
++ freebsd-elf*)
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ ;;
+
+-_LT_TAG_COMPILER
+-# Save the default compiler, since it gets overwritten when the other
+-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+-compiler_DEFAULT=$CC
++ freebsd* | dragonfly*)
++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++ # conventions
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ ;;
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++ gnu*)
++ ;;
+
+-if test -n "$compiler"; then
+- _LT_COMPILER_NO_RTTI($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+- LT_SYS_DLOPEN_SELF
+- _LT_CMD_STRIPLIB
++ hpux9*)
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++ # but as the default
++ # location of the library.
+
+- # Report which library types will actually be built
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
++ case $cc_basename in
++ CC*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aCC*)
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
+
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
++ hpux10*|hpux11*)
++ if test $with_gnu_ld = no; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
++ case $host_cpu in
++ hppa*64*|ia64*)
++ ;;
++ *)
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ ;;
++ esac
++ fi
++ case $host_cpu in
++ hppa*64*|ia64*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++ *)
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++ # but as the default
++ # location of the library.
++ ;;
++ esac
+
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
++ case $cc_basename in
++ CC*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aCC*)
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ esac
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ if test $with_gnu_ld = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ esac
++ fi
++ else
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
+
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
++ interix[[3-9]]*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++ irix5* | irix6*)
++ case $cc_basename in
++ CC*)
++ # SGI C++
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+- _LT_CONFIG($1)
+-fi
+-AC_LANG_POP
+-CC="$lt_save_CC"
+-])# _LT_LANG_C_CONFIG
++ # Archives containing C++ object files must be created using
++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ if test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
++ fi
++ fi
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++ esac
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(inherit_rpath, $1)=yes
++ ;;
+
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-else
+- _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++ # Archives containing C++ object files must be created using
++ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++ ;;
++ icpc* | ecpc* )
++ # Intel C++
++ with_gnu_ld=yes
++ # version 8.0 and above of icpc choke on multiply defined symbols
++ # if we add $predep_objects and $postdep_objects, however 7.1 and
++ # earlier do not add the objects themselves.
++ case `$CC -V 2>&1` in
++ *"Version 7."*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ *) # Version 8.0 or newer
++ tmp_idyn=
++ case $host_cpu in
++ ia64*) tmp_idyn=' -i_dynamic';;
++ esac
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ esac
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ ;;
++ pgCC* | pgcpp*)
++ # Portland Group C++ compiler
++ case `$CC -V` in
++ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++ $RANLIB $oldlib'
++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ ;;
++ *) # Version 6 will use weak symbols
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ ;;
++ esac
+
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ ;;
++ cxx*)
++ # Compaq C++
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+-# _LT_LANG_CXX_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for a C++ compiler are suitably
+-# defined. These variables are subsequently used by _LT_CONFIG to write
+-# the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_EGREP])dnl
++ runpath_var=LD_RUN_PATH
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+-AC_LANG_PUSH(C++)
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(compiler_needs_object, $1)=no
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ ;;
++ xl*)
++ # IBM XL 8.0 on PPC, with GNU ld
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ if test "x$supports_anon_versioning" = xyes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+-# Source file extension for C++ test sources.
+-ac_ext=cpp
++ # Not sure whether something based on
++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
++ # would be better.
++ output_verbose_link_cmd='echo'
+
+-# Object file extension for compiled C++ test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ esac
++ ;;
++ esac
++ ;;
+
+-# No sense in running all these tests if we already determined that
+-# the CXX compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_caught_CXX_error" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="int some_variable = 0;"
++ lynxos*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
+
+- # Code to be used in simple link tests
+- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
++ m88k*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
+
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
++ mvs*)
++ case $cc_basename in
++ cxx*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
+
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
++ netbsd*)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++ wlarc=
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ fi
++ # Workaround some broken pre-1.5 toolchains
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++ ;;
+
+- # Allow CC to be a program name with arguments.
+- lt_save_CC=$CC
+- lt_save_LD=$LD
+- lt_save_GCC=$GCC
+- GCC=$GXX
+- lt_save_with_gnu_ld=$with_gnu_ld
+- lt_save_path_LD=$lt_cv_path_LD
+- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+- else
+- $as_unset lt_cv_prog_gnu_ld
+- fi
+- if test -n "${lt_cv_path_LDCXX+set}"; then
+- lt_cv_path_LD=$lt_cv_path_LDCXX
+- else
+- $as_unset lt_cv_path_LD
+- fi
+- test -z "${LDCXX+set}" || LD=$LDCXX
+- CC=${CXX-"c++"}
+- compiler=$CC
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
++ *nto* | *qnx*)
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ ;;
+
+- if test -n "$compiler"; then
+- # We don't want -fno-exception when compiling C++ code, so set the
+- # no_builtin_flag separately
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+- else
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+- fi
++ openbsd2*)
++ # C++ shared libraries are fairly broken
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
+
+- if test "$GXX" = yes; then
+- # Set up default GNU C++ configuration
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ fi
++ output_verbose_link_cmd=echo
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
+
+- LT_PATH_LD
++ osf3* | osf4* | osf5*)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+- # Check if GNU C++ uses GNU ld as the underlying linker, since the
+- # archiving commands below assume that GNU ld is being used.
+- if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+- # investigate it a little bit more. (MM)
+- wlarc='${wl}'
++ # Archives containing C++ object files must be created using
++ # the KAI C++ compiler.
++ case $host in
++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
++ esac
++ ;;
++ RCC*)
++ # Rational C++ 2.4.1
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ cxx*)
++ case $host in
++ osf3*)
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ ;;
++ *)
++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++ echo "-hidden">> $lib.exp~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
++ $RM $lib.exp'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ ;;
++ esac
+
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+- $GREP 'no-whole-archive' > /dev/null; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- with_gnu_ld=no
+- wlarc=
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+- # A generic and very simple default shared library creation
+- # command for GNU C++ for the case where it uses the native
+- # linker, instead of GNU ld. If possible, this setting should
+- # overridden to take advantage of the native linker features on
+- # the platform it is being used on.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- fi
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++ ;;
++ *)
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ case $host in
++ osf3*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ ;;
++ esac
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+- else
+- GXX=no
+- with_gnu_ld=no
+- wlarc=
+- fi
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+- # PORTME: fill in a description of your system's C++ link characteristics
+- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- case $host_os in
+- aix3*)
++ else
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- aix_use_runtimelinking=no
+
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- case $ld_flag in
+- *-brtl*)
+- aix_use_runtimelinking=yes
+- break
+- ;;
+- esac
+- done
++ sunos4*)
++ case $cc_basename in
++ CC*)
++ # Sun C++ 4.x
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- esac
++ lcc*)
++ # Lucid
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
+
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
++ solaris*)
++ case $cc_basename in
++ CC*)
++ # Sun C++ 4.2, 5.x and Centerline C++
++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ ;;
++ esac
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+- _LT_TAGVAR(archive_cmds, $1)=''
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++ output_verbose_link_cmd='echo'
+
+- if test "$GXX" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" &&
+- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ gcx*)
++ # Green Hills C++ Compiler
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to
+- # export.
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an empty
+- # executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # The C++ compiler must be used to create the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++ ;;
++ *)
++ # GNU C++ compiler with Solaris linker
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared
+- # libraries.
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ else
++ # g++ 2.7 appears to require `-G' NOT `-shared' on this
++ # platform.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ fi
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ ;;
++ esac
++ fi
++ ;;
++ esac
+ ;;
+
+- beos*)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
+
+- chorus*)
+- case $cc_basename in
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+- esac
+- ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
+
+- cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
+
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- darwin* | rhapsody*)
+- _LT_DARWIN_LINKER_FEATURES($1)
+- ;;
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
+
+- dgux*)
++ tandem*)
+ case $cc_basename in
+- ec++*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- ghcx*)
+- # Green Hills C++ Compiler
++ NCC*)
++ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+@@ -6647,644 +6320,538 @@
+ esac
+ ;;
+
+- freebsd[[12]]*)
+- # C++ shared libraries reported to be fairly broken before
+- # switch to ELF
++ vxworks*)
++ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+- freebsd-elf*)
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
++ esac
++
++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++ _LT_TAGVAR(GCC, $1)="$GXX"
++ _LT_TAGVAR(LD, $1)="$LD"
++
++ ## CAVEAT EMPTOR:
++ ## There is no encapsulation within the following macros, do not change
++ ## the running order or otherwise move them around unless you know exactly
++ ## what you are doing...
++ _LT_SYS_HIDDEN_LIBDEPS($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++
++ _LT_CONFIG($1)
++ fi # test -n "$compiler"
++
++ CC=$lt_save_CC
++ LDCXX=$LD
++ LD=$lt_save_LD
++ GCC=$lt_save_GCC
++ with_gnu_ld=$lt_save_with_gnu_ld
++ lt_cv_path_LDCXX=$lt_cv_path_LD
++ lt_cv_path_LD=$lt_save_path_LD
++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++fi # test "$_lt_caught_CXX_error" != yes
++
++AC_LANG_POP
++])# _LT_LANG_CXX_CONFIG
++
++
++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
++# ---------------------------------
++# Figure out "hidden" library dependencies from verbose
++# compiler output when linking a shared library.
++# Parse the compiler output and extract the necessary
++# objects, libraries and library flags.
++m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++# Dependencies to place before and after the object being linked:
++_LT_TAGVAR(predep_objects, $1)=
++_LT_TAGVAR(postdep_objects, $1)=
++_LT_TAGVAR(predeps, $1)=
++_LT_TAGVAR(postdeps, $1)=
++_LT_TAGVAR(compiler_lib_search_path, $1)=
++
++dnl we can't use the lt_simple_compile_test_code here,
++dnl because it contains code intended for an executable,
++dnl not a library. It's possible we should let each
++dnl tag define a new lt_????_link_test_code variable,
++dnl but it's only used here...
++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
++int a;
++void foo (void) { a = 0; }
++_LT_EOF
++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
++class Foo
++{
++public:
++ Foo (void) { a = 0; }
++private:
++ int a;
++};
++_LT_EOF
++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
++ subroutine foo
++ implicit none
++ integer*4 a
++ a=0
++ return
++ end
++_LT_EOF
++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
++ subroutine foo
++ implicit none
++ integer a
++ a=0
++ return
++ end
++_LT_EOF
++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
++public class foo {
++ private int a;
++ public void bar (void) {
++ a = 0;
++ }
++};
++_LT_EOF
++])
++dnl Parse the compiler output and extract the necessary
++dnl objects, libraries and library flags.
++if AC_TRY_EVAL(ac_compile); then
++ # Parse the compiler output and extract the necessary
++ # objects, libraries and library flags.
++
++ # Sentinel used to keep track of whether or not we are before
++ # the conftest object file.
++ pre_test_object_deps_done=no
++
++ for p in `eval "$output_verbose_link_cmd"`; do
++ case $p in
++
++ -L* | -R* | -l*)
++ # Some compilers place space between "-{L,R}" and the path.
++ # Remove the space.
++ if test $p = "-L" ||
++ test $p = "-R"; then
++ prev=$p
++ continue
++ else
++ prev=
++ fi
++
++ if test "$pre_test_object_deps_done" = no; then
++ case $p in
++ -L* | -R*)
++ # Internal compiler library paths should come after those
++ # provided the user. The postdeps already come after the
++ # user supplied libs so there is no need to process them.
++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
++ else
++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
++ fi
++ ;;
++ # The "-l" case would never come before the object being
++ # linked, so don't bother handling this case.
++ esac
++ else
++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
++ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
++ else
++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
++ fi
++ fi
++ ;;
+
+- freebsd* | dragonfly*)
+- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+- # conventions
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- ;;
++ *.$objext)
++ # This assumes that the test object file only shows up
++ # once in the compiler output.
++ if test "$p" = "conftest.$objext"; then
++ pre_test_object_deps_done=yes
++ continue
++ fi
+
+- gnu*)
+- ;;
++ if test "$pre_test_object_deps_done" = no; then
++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
++ _LT_TAGVAR(predep_objects, $1)="$p"
++ else
++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
++ fi
++ else
++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
++ _LT_TAGVAR(postdep_objects, $1)="$p"
++ else
++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
++ fi
++ fi
++ ;;
+
+- hpux9*)
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
++ *) ;; # Ignore the rest.
+
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
++ esac
++ done
+
+- hpux10*|hpux11*)
+- if test $with_gnu_ld = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ # Clean up.
++ rm -f a.out a.exe
++else
++ echo "libtool.m4: error: problem compiling $1 test program"
++fi
+
+- case $host_cpu in
+- hppa*64*|ia64*)
+- ;;
+- *)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
+- esac
+- fi
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+- ;;
+- esac
++$RM -f confest.$objext
+
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test $with_gnu_ld = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- fi
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
++# PORTME: override above test on systems where it is broken
++m4_if([$1], [CXX],
++[case $host_os in
++interix[[3-9]]*)
++ # Interix 3.5 installs completely hosed .la files for C++, so rather than
++ # hack all around it, let's just trust "g++" to DTRT.
++ _LT_TAGVAR(predep_objects,$1)=
++ _LT_TAGVAR(postdep_objects,$1)=
++ _LT_TAGVAR(postdeps,$1)=
++ ;;
+
+- interix[[3-9]]*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
+- irix5* | irix6*)
+- case $cc_basename in
+- CC*)
+- # SGI C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++linux*)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
+
+- # Archives containing C++ object files must be created using
+- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+- fi
+- fi
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+- esac
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(inherit_rpath, $1)=yes
+- ;;
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
+
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
+
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++solaris*)
++ case $cc_basename in
++ CC*)
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ # Adding this requires a known-good setup of shared libraries for
++ # Sun compiler versions before 5.6, else PIC objects from an old
++ # archive will be linked into the output, leading to subtle bugs.
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
++esac
++])
+
+- # Archives containing C++ object files must be created using
+- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+- ;;
+- icpc* | ecpc* )
+- # Intel C++
+- with_gnu_ld=yes
+- # version 8.0 and above of icpc choke on multiply defined symbols
+- # if we add $predep_objects and $postdep_objects, however 7.1 and
+- # earlier do not add the objects themselves.
+- case `$CC -V 2>&1` in
+- *"Version 7."*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- *) # Version 8.0 or newer
+- tmp_idyn=
+- case $host_cpu in
+- ia64*) tmp_idyn=' -i_dynamic';;
+- esac
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- esac
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+- ;;
+- pgCC* | pgcpp*)
+- # Portland Group C++ compiler
+- case `$CC -V` in
+- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+- $RANLIB $oldlib'
+- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+- ;;
+- *) # Version 6 will use weak symbols
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+- ;;
+- esac
++case " $_LT_TAGVAR(postdeps, $1) " in
++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
++esac
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
++fi
++_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
++ [The directories searched by this compiler when creating a shared library])
++_LT_TAGDECL([], [predep_objects], [1],
++ [Dependencies to place before and after the objects being linked to
++ create a shared library])
++_LT_TAGDECL([], [postdep_objects], [1])
++_LT_TAGDECL([], [predeps], [1])
++_LT_TAGDECL([], [postdeps], [1])
++_LT_TAGDECL([], [compiler_lib_search_path], [1],
++ [The library search path used internally by the compiler when linking
++ a shared library])
++])# _LT_SYS_HIDDEN_LIBDEPS
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- ;;
+- cxx*)
+- # Compaq C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+- runpath_var=LD_RUN_PATH
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++# _LT_PROG_F77
++# ------------
++# Since AC_PROG_F77 is broken, in that it returns the empty string
++# if there is no fortran compiler, we have our own version here.
++m4_defun([_LT_PROG_F77],
++[
++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
++AC_PROG_F77
++if test -z "$F77" || test "X$F77" = "Xno"; then
++ _lt_disable_F77=yes
++fi
++popdef([AC_MSG_ERROR])
++])# _LT_PROG_F77
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- xl*)
+- # IBM XL 8.0 on PPC, with GNU ld
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- _LT_TAGVAR(compiler_needs_object, $1)=yes
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([_LT_PROG_F77], [])
+
+- # Not sure whether something based on
+- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+- # would be better.
+- output_verbose_link_cmd='echo'
+
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- esac
+- ;;
+- esac
+- ;;
++# _LT_LANG_F77_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a Fortran 77 compiler are
++# suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_F77_CONFIG],
++[AC_REQUIRE([_LT_PROG_F77])dnl
++AC_LANG_PUSH(Fortran 77)
+
+- lynxos*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+- m88k*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
++# Source file extension for f77 test sources.
++ac_ext=f
+
+- mvs*)
+- case $cc_basename in
+- cxx*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
++# Object file extension for compiled f77 test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
+
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+- wlarc=
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- fi
+- # Workaround some broken pre-1.5 toolchains
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+- ;;
++# No sense in running all these tests if we already determined that
++# the F77 compiler isn't working. Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_F77" != yes; then
++ # Code to be used in simple compile tests
++ lt_simple_compile_test_code="\
++ subroutine t
++ return
++ end
++"
+
+- *nto* | *qnx*)
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- ;;
++ # Code to be used in simple link tests
++ lt_simple_link_test_code="\
++ program t
++ end
++"
+
+- openbsd2*)
+- # C++ shared libraries are fairly broken
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
++ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++ _LT_TAG_COMPILER
+
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- fi
+- output_verbose_link_cmd=echo
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ # save warnings/boilerplate of simple test code
++ _LT_COMPILER_BOILERPLATE
++ _LT_LINKER_BOILERPLATE
+
+- osf3* | osf4* | osf5*)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
++ # Allow CC to be a program name with arguments.
++ lt_save_CC="$CC"
++ lt_save_GCC=$GCC
++ CC=${F77-"f77"}
++ compiler=$CC
++ _LT_TAGVAR(compiler, $1)=$CC
++ _LT_CC_BASENAME([$compiler])
++ GCC=$G77
++ if test -n "$compiler"; then
++ AC_MSG_CHECKING([if libtool supports shared libraries])
++ AC_MSG_RESULT([$can_build_shared])
+
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ AC_MSG_CHECKING([whether to build shared libraries])
++ test "$can_build_shared" = "no" && enable_shared=no
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ AC_MSG_RESULT([$enable_shared])
+
+- # Archives containing C++ object files must be created using
+- # the KAI C++ compiler.
+- case $host in
+- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+- esac
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- cxx*)
+- case $host in
+- osf3*)
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- ;;
+- *)
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+- echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+- $RM $lib.exp'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- ;;
+- esac
++ AC_MSG_CHECKING([whether to build static libraries])
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ AC_MSG_RESULT([$enable_static])
+
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(GCC, $1)="$G77"
++ _LT_TAGVAR(LD, $1)="$LD"
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- case $host in
+- osf3*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- ;;
+- esac
++ ## CAVEAT EMPTOR:
++ ## There is no encapsulation within the following macros, do not change
++ ## the running order or otherwise move them around unless you know exactly
++ ## what you are doing...
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_CONFIG($1)
++ fi # test -n "$compiler"
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++ GCC=$lt_save_GCC
++ CC="$lt_save_CC"
++fi # test "$_lt_disable_F77" != yes
+
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
++AC_LANG_POP
++])# _LT_LANG_F77_CONFIG
+
+- psos*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+
+- sunos4*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.x
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- lcc*)
+- # Lucid
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
++# _LT_PROG_FC
++# -----------
++# Since AC_PROG_FC is broken, in that it returns the empty string
++# if there is no fortran compiler, we have our own version here.
++m4_defun([_LT_PROG_FC],
++[
++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
++AC_PROG_FC
++if test -z "$FC" || test "X$FC" = "Xno"; then
++ _lt_disable_FC=yes
++fi
++popdef([AC_MSG_ERROR])
++])# _LT_PROG_FC
+
+- solaris*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.2, 5.x and Centerline C++
+- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([_LT_PROG_FC], [])
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- ;;
+- esac
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+- output_verbose_link_cmd='echo'
++# _LT_LANG_FC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for a Fortran compiler are
++# suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_FC_CONFIG],
++[AC_REQUIRE([_LT_PROG_FC])dnl
++AC_LANG_PUSH(Fortran)
+
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- gcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+- # The C++ compiler must be used to create the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+- ;;
+- *)
+- # GNU C++ compiler with Solaris linker
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++# Source file extension for fc test sources.
++ac_ext=${ac_fc_srcext-f}
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+- else
+- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+- # platform.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++# Object file extension for compiled fc test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the FC compiler isn't working. Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_FC" != yes; then
++ # Code to be used in simple compile tests
++ lt_simple_compile_test_code="\
++ subroutine t
++ return
++ end
++"
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+- fi
++ # Code to be used in simple link tests
++ lt_simple_link_test_code="\
++ program t
++ end
++"
+
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- ;;
+- esac
+- fi
+- ;;
+- esac
+- ;;
++ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++ _LT_TAG_COMPILER
+
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
++ # save warnings/boilerplate of simple test code
++ _LT_COMPILER_BOILERPLATE
++ _LT_LINKER_BOILERPLATE
+
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
++ # Allow CC to be a program name with arguments.
++ lt_save_CC="$CC"
++ lt_save_GCC=$GCC
++ CC=${FC-"f95"}
++ compiler=$CC
++ GCC=$ac_cv_fc_compiler_gnu
+
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
++ _LT_TAGVAR(compiler, $1)=$CC
++ _LT_CC_BASENAME([$compiler])
+
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
++ if test -n "$compiler"; then
++ AC_MSG_CHECKING([if libtool supports shared libraries])
++ AC_MSG_RESULT([$can_build_shared])
+
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
++ AC_MSG_CHECKING([whether to build shared libraries])
++ test "$can_build_shared" = "no" && enable_shared=no
+
+- vxworks*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
+ ;;
+-
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
++ aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
+ ;;
+ esac
++ AC_MSG_RESULT([$enable_shared])
+
+- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++ AC_MSG_CHECKING([whether to build static libraries])
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ AC_MSG_RESULT([$enable_static])
+
+- _LT_TAGVAR(GCC, $1)="$GXX"
++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+@@ -7302,1636 +6869,2089 @@
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+- CC=$lt_save_CC
+- LDCXX=$LD
+- LD=$lt_save_LD
+ GCC=$lt_save_GCC
+- with_gnu_ld=$lt_save_with_gnu_ld
+- lt_cv_path_LDCXX=$lt_cv_path_LD
+- lt_cv_path_LD=$lt_save_path_LD
+- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+-fi # test "$_lt_caught_CXX_error" != yes
++ CC="$lt_save_CC"
++fi # test "$_lt_disable_FC" != yes
+
+ AC_LANG_POP
+-])# _LT_LANG_CXX_CONFIG
++])# _LT_LANG_FC_CONFIG
+
+
+-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+-# ---------------------------------
+-# Figure out "hidden" library dependencies from verbose
+-# compiler output when linking a shared library.
+-# Parse the compiler output and extract the necessary
+-# objects, libraries and library flags.
+-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-# Dependencies to place before and after the object being linked:
+-_LT_TAGVAR(predep_objects, $1)=
+-_LT_TAGVAR(postdep_objects, $1)=
+-_LT_TAGVAR(predeps, $1)=
+-_LT_TAGVAR(postdeps, $1)=
+-_LT_TAGVAR(compiler_lib_search_path, $1)=
++# _LT_LANG_GCJ_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for the GNU Java Compiler compiler
++# are suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_GCJ_CONFIG],
++[AC_REQUIRE([LT_PROG_GCJ])dnl
++AC_LANG_SAVE
+
+-dnl we can't use the lt_simple_compile_test_code here,
+-dnl because it contains code intended for an executable,
+-dnl not a library. It's possible we should let each
+-dnl tag define a new lt_????_link_test_code variable,
+-dnl but it's only used here...
+-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+-int a;
+-void foo (void) { a = 0; }
+-_LT_EOF
+-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+-class Foo
+-{
+-public:
+- Foo (void) { a = 0; }
+-private:
+- int a;
+-};
+-_LT_EOF
+-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+- subroutine foo
+- implicit none
+- integer*4 a
+- a=0
+- return
+- end
+-_LT_EOF
+-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+- subroutine foo
+- implicit none
+- integer a
+- a=0
+- return
+- end
+-_LT_EOF
+-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+-public class foo {
+- private int a;
+- public void bar (void) {
+- a = 0;
+- }
+-};
+-_LT_EOF
+-])
+-dnl Parse the compiler output and extract the necessary
+-dnl objects, libraries and library flags.
+-if AC_TRY_EVAL(ac_compile); then
+- # Parse the compiler output and extract the necessary
+- # objects, libraries and library flags.
++# Source file extension for Java test sources.
++ac_ext=java
++
++# Object file extension for compiled Java test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++lt_save_GCC=$GCC
++GCC=yes
++CC=${GCJ-"gcj"}
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_TAGVAR(LD, $1)="$LD"
++_LT_CC_BASENAME([$compiler])
++
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++
++if test -n "$compiler"; then
++ _LT_COMPILER_NO_RTTI($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+- # Sentinel used to keep track of whether or not we are before
+- # the conftest object file.
+- pre_test_object_deps_done=no
++ _LT_CONFIG($1)
++fi
+
+- for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
++AC_LANG_RESTORE
+
+- -L* | -R* | -l*)
+- # Some compilers place space between "-{L,R}" and the path.
+- # Remove the space.
+- if test $p = "-L" ||
+- test $p = "-R"; then
+- prev=$p
+- continue
+- else
+- prev=
+- fi
++GCC=$lt_save_GCC
++CC="$lt_save_CC"
++])# _LT_LANG_GCJ_CONFIG
+
+- if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
+- # Internal compiler library paths should come after those
+- # provided the user. The postdeps already come after the
+- # user supplied libs so there is no need to process them.
+- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+- else
+- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+- fi
+- ;;
+- # The "-l" case would never come before the object being
+- # linked, so don't bother handling this case.
+- esac
+- else
+- if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+- else
+- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+- fi
+- fi
+- ;;
+
+- *.$objext)
+- # This assumes that the test object file only shows up
+- # once in the compiler output.
+- if test "$p" = "conftest.$objext"; then
+- pre_test_object_deps_done=yes
+- continue
+- fi
++# _LT_LANG_RC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for the Windows resource compiler
++# are suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_RC_CONFIG],
++[AC_REQUIRE([LT_PROG_RC])dnl
++AC_LANG_SAVE
+
+- if test "$pre_test_object_deps_done" = no; then
+- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+- _LT_TAGVAR(predep_objects, $1)="$p"
+- else
+- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+- fi
+- else
+- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+- _LT_TAGVAR(postdep_objects, $1)="$p"
+- else
+- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+- fi
+- fi
+- ;;
++# Source file extension for RC test sources.
++ac_ext=rc
+
+- *) ;; # Ignore the rest.
++# Object file extension for compiled RC test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
+
+- esac
+- done
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+- # Clean up.
+- rm -f a.out a.exe
+-else
+- echo "libtool.m4: error: problem compiling $1 test program"
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++lt_save_GCC=$GCC
++GCC=
++CC=${RC-"windres"}
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++
++if test -n "$compiler"; then
++ :
++ _LT_CONFIG($1)
+ fi
+
+-$RM -f confest.$objext
++GCC=$lt_save_GCC
++AC_LANG_RESTORE
++CC="$lt_save_CC"
++])# _LT_LANG_RC_CONFIG
+
+-# PORTME: override above test on systems where it is broken
+-m4_if([$1], [CXX],
+-[case $host_os in
+-interix[[3-9]]*)
+- # Interix 3.5 installs completely hosed .la files for C++, so rather than
+- # hack all around it, let's just trust "g++" to DTRT.
+- _LT_TAGVAR(predep_objects,$1)=
+- _LT_TAGVAR(postdep_objects,$1)=
+- _LT_TAGVAR(postdeps,$1)=
+- ;;
+
+-linux*)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
++# LT_PROG_GCJ
++# -----------
++AC_DEFUN([LT_PROG_GCJ],
++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
++ [AC_CHECK_TOOL(GCJ, gcj,)
++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
++ AC_SUBST(GCJFLAGS)])])[]dnl
++])
+
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
++# Old name:
++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
+
+-solaris*)
+- case $cc_basename in
+- CC*)
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
++# LT_PROG_RC
++# ----------
++AC_DEFUN([LT_PROG_RC],
++[AC_CHECK_TOOL(RC, windres,)
++])
+
+- # Adding this requires a known-good setup of shared libraries for
+- # Sun compiler versions before 5.6, else PIC objects from an old
+- # archive will be linked into the output, leading to subtle bugs.
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++# Old name:
++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_RC], [])
++
++
++# _LT_DECL_EGREP
++# --------------
++# If we don't have a new enough Autoconf to choose the best grep
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_EGREP],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_REQUIRE([AC_PROG_FGREP])dnl
++test -z "$GREP" && GREP=grep
++_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
++_LT_DECL([], [EGREP], [1], [An ERE matcher])
++_LT_DECL([], [FGREP], [1], [A literal string matcher])
++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
++AC_SUBST([GREP])
++])
++
++
++# _LT_DECL_OBJDUMP
++# --------------
++# If we don't have a new enough Autoconf to choose the best objdump
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_OBJDUMP],
++[AC_CHECK_TOOL(OBJDUMP, objdump, false)
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
++AC_SUBST([OBJDUMP])
++])
++
++
++# _LT_DECL_SED
++# ------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible. Prefer GNU sed if found.
++m4_defun([_LT_DECL_SED],
++[AC_PROG_SED
++test -z "$SED" && SED=sed
++Xsed="$SED -e 1s/^X//"
++_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
++ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
++])# _LT_DECL_SED
++
++m4_ifndef([AC_PROG_SED], [
++# NOTE: This macro has been submitted for inclusion into #
++# GNU Autoconf as AC_PROG_SED. When it is available in #
++# a released version of Autoconf we should remove this #
++# macro and use it instead. #
++
++m4_defun([AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for lt_ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
++ fi
++ done
++ done
++done
++IFS=$as_save_IFS
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++ test ! -f $lt_ac_sed && continue
++ cat /dev/null > conftest.in
++ lt_ac_count=0
++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++ # Check for GNU sed and select it if it is found.
++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++ lt_cv_path_SED=$lt_ac_sed
++ break
++ fi
++ while true; do
++ cat conftest.in conftest.in >conftest.tmp
++ mv conftest.tmp conftest.in
++ cp conftest.in conftest.nl
++ echo >>conftest.nl
++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++ cmp -s conftest.out conftest.nl || break
++ # 10000 chars as input seems more than enough
++ test $lt_ac_count -gt 10 && break
++ lt_ac_count=`expr $lt_ac_count + 1`
++ if test $lt_ac_count -gt $lt_ac_max; then
++ lt_ac_max=$lt_ac_count
++ lt_cv_path_SED=$lt_ac_sed
+ fi
+- ;;
+- esac
+- ;;
+-esac
++ done
++done
])
-
--# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
-+# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
++SED=$lt_cv_path_SED
++AC_SUBST([SED])
++AC_MSG_RESULT([$SED])
++])#AC_PROG_SED
++])#m4_ifndef
+
+-case " $_LT_TAGVAR(postdeps, $1) " in
+-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+-esac
+- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+-fi
+-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+- [The directories searched by this compiler when creating a shared library])
+-_LT_TAGDECL([], [predep_objects], [1],
+- [Dependencies to place before and after the objects being linked to
+- create a shared library])
+-_LT_TAGDECL([], [postdep_objects], [1])
+-_LT_TAGDECL([], [predeps], [1])
+-_LT_TAGDECL([], [postdeps], [1])
+-_LT_TAGDECL([], [compiler_lib_search_path], [1],
+- [The library search path used internally by the compiler when linking
+- a shared library])
+-])# _LT_SYS_HIDDEN_LIBDEPS
+-
+-
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+- _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
++# Old name:
++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+ dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
++dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+-# _LT_LANG_F77_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for a Fortran 77 compiler are
+-# suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
+
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++# _LT_CHECK_SHELL_FEATURES
++# ------------------------
++# Find out whether the shell is Bourne or XSI compatible,
++# or has some other useful features.
++m4_defun([_LT_CHECK_SHELL_FEATURES],
++[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
++# Try some XSI features
++xsi_shell=no
++( _lt_dummy="a/b/c"
++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,, \
++ && eval 'test $(( 1 + 1 )) -eq 2 \
++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
++ && xsi_shell=yes
++AC_MSG_RESULT([$xsi_shell])
++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+-# Source file extension for f77 test sources.
+-ac_ext=f
++AC_MSG_CHECKING([whether the shell understands "+="])
++lt_shell_append=no
++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
++ >/dev/null 2>&1 \
++ && lt_shell_append=yes
++AC_MSG_RESULT([$lt_shell_append])
++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+-# Object file extension for compiled f77 test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ lt_unset=unset
++else
++ lt_unset=false
++fi
++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+-# No sense in running all these tests if we already determined that
+-# the F77 compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_disable_F77" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++ lt_SP2NL='tr \040 \012'
++ lt_NL2SP='tr \015\012 \040\040'
++ ;;
++ *) # EBCDIC based system
++ lt_SP2NL='tr \100 \n'
++ lt_NL2SP='tr \r\n \100\100'
++ ;;
++esac
++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
++])# _LT_CHECK_SHELL_FEATURES
+
+- # Code to be used in simple link tests
+- lt_simple_link_test_code="\
+- program t
+- end
+-"
+
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
++# _LT_PROG_XSI_SHELLFNS
++# ---------------------
++# Bourne and XSI compatible variants of some useful shell functions.
++m4_defun([_LT_PROG_XSI_SHELLFNS],
++[case $xsi_shell in
++ yes)
++ cat << \_LT_EOF >> "$cfgfile"
+
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE. If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++}
+
+- # Allow CC to be a program name with arguments.
+- lt_save_CC="$CC"
+- lt_save_GCC=$GCC
+- CC=${F77-"f77"}
+- compiler=$CC
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+- GCC=$G77
+- if test -n "$compiler"; then
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
++# func_basename file
++func_basename ()
++{
++ func_basename_result="${1##*/}"
++}
+
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
++# func_dirname_and_basename file append nondir_replacement
++# perform func_basename and func_dirname in a single function
++# call:
++# dirname: Compute the dirname of FILE. If nonempty,
++# add APPEND to the result, otherwise set result
++# to NONDIR_REPLACEMENT.
++# value returned in "$func_dirname_result"
++# basename: Compute filename of FILE.
++# value retuned in "$func_basename_result"
++# Implementation must be kept synchronized with func_dirname
++# and func_basename. For efficiency, we do not delegate to
++# those functions but instead duplicate the functionality here.
++func_dirname_and_basename ()
++{
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++ func_basename_result="${1##*/}"
++}
+
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++func_stripname ()
++{
++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++ # positional parameters, so assign one to ordinary parameter first.
++ func_stripname_result=${3}
++ func_stripname_result=${func_stripname_result#"${1}"}
++ func_stripname_result=${func_stripname_result%"${2}"}
++}
+
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
++# func_opt_split
++func_opt_split ()
++{
++ func_opt_split_opt=${1%%=*}
++ func_opt_split_arg=${1#*=}
++}
+
+- _LT_TAGVAR(GCC, $1)="$G77"
+- _LT_TAGVAR(LD, $1)="$LD"
++# func_lo2o object
++func_lo2o ()
++{
++ case ${1} in
++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++ *) func_lo2o_result=${1} ;;
++ esac
++}
+
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
++# func_xform libobj-or-source
++func_xform ()
++{
++ func_xform_result=${1%.*}.lo
++}
+
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
++# func_arith arithmetic-term...
++func_arith ()
++{
++ func_arith_result=$(( $[*] ))
++}
+
+- GCC=$lt_save_GCC
+- CC="$lt_save_CC"
+-fi # test "$_lt_disable_F77" != yes
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++ func_len_result=${#1}
++}
+
+-AC_LANG_POP
+-])# _LT_LANG_F77_CONFIG
++_LT_EOF
++ ;;
++ *) # Bourne compatible functions.
++ cat << \_LT_EOF >> "$cfgfile"
+
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE. If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++ # Extract subdirectory from the argument.
++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
++ if test "X$func_dirname_result" = "X${1}"; then
++ func_dirname_result="${3}"
++ else
++ func_dirname_result="$func_dirname_result${2}"
++ fi
++}
+
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+- _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
++# func_basename file
++func_basename ()
++{
++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
++}
+
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
++dnl func_dirname_and_basename
++dnl A portable version of this function is already defined in general.m4sh
++dnl so there is no need for it here.
+
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "X${3}" \
++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "X${3}" \
++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
++ esac
++}
+
+-# _LT_LANG_FC_CONFIG([TAG])
+-# -------------------------
+-# Ensure that the configuration variables for a Fortran compiler are
+-# suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
++# sed scripts:
++my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
++my_sed_long_arg='1s/^-[[^=]]*=//'
+
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++# func_opt_split
++func_opt_split ()
++{
++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
++}
+
+-# Source file extension for fc test sources.
+-ac_ext=${ac_fc_srcext-f}
++# func_lo2o object
++func_lo2o ()
++{
++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
++}
+
+-# Object file extension for compiled fc test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
++# func_xform libobj-or-source
++func_xform ()
++{
++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
++}
+
+-# No sense in running all these tests if we already determined that
+-# the FC compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_disable_FC" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
++# func_arith arithmetic-term...
++func_arith ()
++{
++ func_arith_result=`expr "$[@]"`
++}
+
+- # Code to be used in simple link tests
+- lt_simple_link_test_code="\
+- program t
+- end
+-"
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
++}
+
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
++_LT_EOF
++esac
+
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
++case $lt_shell_append in
++ yes)
++ cat << \_LT_EOF >> "$cfgfile"
+
+- # Allow CC to be a program name with arguments.
+- lt_save_CC="$CC"
+- lt_save_GCC=$GCC
+- CC=${FC-"f95"}
+- compiler=$CC
+- GCC=$ac_cv_fc_compiler_gnu
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++ eval "$[1]+=\$[2]"
++}
++_LT_EOF
++ ;;
++ *)
++ cat << \_LT_EOF >> "$cfgfile"
+
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++ eval "$[1]=\$$[1]\$[2]"
++}
+
+- if test -n "$compiler"; then
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
++_LT_EOF
++ ;;
++ esac
++])
+
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
++# Helper functions for option handling. -*- Autoconf -*-
++#
++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
+
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
++# serial 6 ltoptions.m4
+
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+- _LT_TAGVAR(LD, $1)="$LD"
+
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_SYS_HIDDEN_LIBDEPS($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
++# ------------------------------------------
++m4_define([_LT_MANGLE_OPTION],
++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+
+- GCC=$lt_save_GCC
+- CC="$lt_save_CC"
+-fi # test "$_lt_disable_FC" != yes
++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
++# ---------------------------------------
++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
++# matching handler defined, dispatch to it. Other OPTION-NAMEs are
++# saved as a flag.
++m4_define([_LT_SET_OPTION],
++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
++ _LT_MANGLE_DEFUN([$1], [$2]),
++ [m4_warning([Unknown $1 option `$2'])])[]dnl
++])
+
+-AC_LANG_POP
+-])# _LT_LANG_FC_CONFIG
+
++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
++# ------------------------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++m4_define([_LT_IF_OPTION],
++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+-# _LT_LANG_GCJ_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for the GNU Java Compiler compiler
+-# are suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_GCJ_CONFIG],
+-[AC_REQUIRE([LT_PROG_GCJ])dnl
+-AC_LANG_SAVE
+
+-# Source file extension for Java test sources.
+-ac_ext=java
++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
++# -------------------------------------------------------
++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
++# are set.
++m4_define([_LT_UNLESS_OPTIONS],
++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
++ [m4_define([$0_found])])])[]dnl
++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
++])[]dnl
++])
+
+-# Object file extension for compiled Java test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="class foo {}"
++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
++# ----------------------------------------
++# OPTION-LIST is a space-separated list of Libtool options associated
++# with MACRO-NAME. If any OPTION has a matching handler declared with
++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
++# the unknown option and exit.
++m4_defun([_LT_SET_OPTIONS],
++[# Set options
++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++ [_LT_SET_OPTION([$1], _LT_Option)])
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
++m4_if([$1],[LT_INIT],[
++ dnl
++ dnl Simply set some default values (i.e off) if boolean options were not
++ dnl specified:
++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
++ ])
++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
++ ])
++ dnl
++ dnl If no reference was made to various pairs of opposing options, then
++ dnl we run the default mode handler for the pair. For example, if neither
++ dnl `shared' nor `disable-shared' was passed, we enable building of shared
++ dnl archives by default:
++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
++ [_LT_ENABLE_FAST_INSTALL])
++ ])
++])# _LT_SET_OPTIONS
+
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_TAG_COMPILER
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-lt_save_GCC=$GCC
+-GCC=yes
+-CC=${GCJ-"gcj"}
+-compiler=$CC
+-_LT_TAGVAR(compiler, $1)=$CC
+-_LT_TAGVAR(LD, $1)="$LD"
+-_LT_CC_BASENAME([$compiler])
++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
++# -----------------------------------------
++m4_define([_LT_MANGLE_DEFUN],
++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+-# GCJ did not exist at the time GCC didn't implicitly link libc in.
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
++# -----------------------------------------------
++m4_define([LT_OPTION_DEFINE],
++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
++])# LT_OPTION_DEFINE
+
+-if test -n "$compiler"; then
+- _LT_COMPILER_NO_RTTI($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+
+- _LT_CONFIG($1)
+-fi
++# dlopen
++# ------
++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
++])
+
+-AC_LANG_RESTORE
++AU_DEFUN([AC_LIBTOOL_DLOPEN],
++[_LT_SET_OPTION([LT_INIT], [dlopen])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `dlopen' option into LT_INIT's first parameter.])
++])
+
+-GCC=$lt_save_GCC
+-CC="$lt_save_CC"
+-])# _LT_LANG_GCJ_CONFIG
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+-# _LT_LANG_RC_CONFIG([TAG])
+-# -------------------------
+-# Ensure that the configuration variables for the Windows resource compiler
+-# are suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_RC_CONFIG],
+-[AC_REQUIRE([LT_PROG_RC])dnl
+-AC_LANG_SAVE
++# win32-dll
++# ---------
++# Declare package support for building win32 dll's.
++LT_OPTION_DEFINE([LT_INIT], [win32-dll],
++[enable_win32_dll=yes
+
+-# Source file extension for RC test sources.
+-ac_ext=rc
++case $host in
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++ AC_CHECK_TOOL(AS, as, false)
++ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++ AC_CHECK_TOOL(OBJDUMP, objdump, false)
++ ;;
++esac
+
+-# Object file extension for compiled RC test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
++test -z "$AS" && AS=as
++_LT_DECL([], [AS], [0], [Assembler program])dnl
+
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+
+-# Code to be used in simple link tests
+-lt_simple_link_test_code="$lt_simple_compile_test_code"
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
++])# win32-dll
+
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_TAG_COMPILER
++AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++_LT_SET_OPTION([LT_INIT], [win32-dll])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `win32-dll' option into LT_INIT's first parameter.])
++])
+
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-lt_save_GCC=$GCC
+-GCC=
+-CC=${RC-"windres"}
+-compiler=$CC
+-_LT_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
+-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+-if test -n "$compiler"; then
+- :
+- _LT_CONFIG($1)
+-fi
++# _LT_ENABLE_SHARED([DEFAULT])
++# ----------------------------
++# implement the --enable-shared flag, and supports the `shared' and
++# `disable-shared' LT_INIT options.
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_SHARED],
++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([shared],
++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_shared=yes ;;
++ no) enable_shared=no ;;
++ *)
++ enable_shared=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_shared=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+-GCC=$lt_save_GCC
+-AC_LANG_RESTORE
+-CC="$lt_save_CC"
+-])# _LT_LANG_RC_CONFIG
++ _LT_DECL([build_libtool_libs], [enable_shared], [0],
++ [Whether or not to build shared libraries])
++])# _LT_ENABLE_SHARED
++
++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
++# Old names:
++AC_DEFUN([AC_ENABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
++])
+
+-# LT_PROG_GCJ
+-# -----------
+-AC_DEFUN([LT_PROG_GCJ],
+-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+- [AC_CHECK_TOOL(GCJ, gcj,)
+- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+- AC_SUBST(GCJFLAGS)])])[]dnl
++AC_DEFUN([AC_DISABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], [disable-shared])
+ ])
+
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
++
+ dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
++dnl AC_DEFUN([AM_ENABLE_SHARED], [])
++dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+-# LT_PROG_RC
+-# ----------
+-AC_DEFUN([LT_PROG_RC],
+-[AC_CHECK_TOOL(RC, windres,)
+-])
+
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_RC], [])
++# _LT_ENABLE_STATIC([DEFAULT])
++# ----------------------------
++# implement the --enable-static flag, and support the `static' and
++# `disable-static' LT_INIT options.
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_STATIC],
++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([static],
++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_static=yes ;;
++ no) enable_static=no ;;
++ *)
++ enable_static=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_static=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
++ _LT_DECL([build_old_libs], [enable_static], [0],
++ [Whether or not to build static libraries])
++])# _LT_ENABLE_STATIC
+
+-# _LT_DECL_EGREP
+-# --------------
+-# If we don't have a new enough Autoconf to choose the best grep
+-# available, choose the one first in the user's PATH.
+-m4_defun([_LT_DECL_EGREP],
+-[AC_REQUIRE([AC_PROG_EGREP])dnl
+-AC_REQUIRE([AC_PROG_FGREP])dnl
+-test -z "$GREP" && GREP=grep
+-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+-_LT_DECL([], [EGREP], [1], [An ERE matcher])
+-_LT_DECL([], [FGREP], [1], [A literal string matcher])
+-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+-AC_SUBST([GREP])
+-])
++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
++# Old names:
++AC_DEFUN([AC_ENABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
++])
+
+-# _LT_DECL_OBJDUMP
+-# --------------
+-# If we don't have a new enough Autoconf to choose the best objdump
+-# available, choose the one first in the user's PATH.
+-m4_defun([_LT_DECL_OBJDUMP],
+-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+-AC_SUBST([OBJDUMP])
++AC_DEFUN([AC_DISABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], [disable-static])
+ ])
+
++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+-# _LT_DECL_SED
+-# ------------
+-# Check for a fully-functional sed program, that truncates
+-# as few characters as possible. Prefer GNU sed if found.
+-m4_defun([_LT_DECL_SED],
+-[AC_PROG_SED
+-test -z "$SED" && SED=sed
+-Xsed="$SED -e 1s/^X//"
+-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+- [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+-])# _LT_DECL_SED
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_STATIC], [])
++dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+-m4_ifndef([AC_PROG_SED], [
+-# NOTE: This macro has been submitted for inclusion into #
+-# GNU Autoconf as AC_PROG_SED. When it is available in #
+-# a released version of Autoconf we should remove this #
+-# macro and use it instead. #
+
+-m4_defun([AC_PROG_SED],
+-[AC_MSG_CHECKING([for a sed that does not truncate output])
+-AC_CACHE_VAL(lt_cv_path_SED,
+-[# Loop through the user's path and test for sed and gsed.
+-# Then use that list of sed's as ones to test for truncation.
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+- IFS=$as_save_IFS
+- test -z "$as_dir" && as_dir=.
+- for lt_ac_prog in sed gsed; do
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+- fi
+- done
+- done
+-done
+-IFS=$as_save_IFS
+-lt_ac_max=0
+-lt_ac_count=0
+-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+-# along with /bin/sed that truncates output.
+-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+- test ! -f $lt_ac_sed && continue
+- cat /dev/null > conftest.in
+- lt_ac_count=0
+- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+- # Check for GNU sed and select it if it is found.
+- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+- lt_cv_path_SED=$lt_ac_sed
+- break
+- fi
+- while true; do
+- cat conftest.in conftest.in >conftest.tmp
+- mv conftest.tmp conftest.in
+- cp conftest.in conftest.nl
+- echo >>conftest.nl
+- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+- cmp -s conftest.out conftest.nl || break
+- # 10000 chars as input seems more than enough
+- test $lt_ac_count -gt 10 && break
+- lt_ac_count=`expr $lt_ac_count + 1`
+- if test $lt_ac_count -gt $lt_ac_max; then
+- lt_ac_max=$lt_ac_count
+- lt_cv_path_SED=$lt_ac_sed
+- fi
+- done
+-done
++
++# _LT_ENABLE_FAST_INSTALL([DEFAULT])
++# ----------------------------------
++# implement the --enable-fast-install flag, and support the `fast-install'
++# and `disable-fast-install' LT_INIT options.
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_FAST_INSTALL],
++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([fast-install],
++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_fast_install=yes ;;
++ no) enable_fast_install=no ;;
++ *)
++ enable_fast_install=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_fast_install=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
++
++_LT_DECL([fast_install], [enable_fast_install], [0],
++ [Whether or not to optimize for fast installation])dnl
++])# _LT_ENABLE_FAST_INSTALL
++
++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
++
++# Old names:
++AU_DEFUN([AC_ENABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `fast-install' option into LT_INIT's first parameter.])
++])
++
++AU_DEFUN([AC_DISABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `disable-fast-install' option into LT_INIT's first parameter.])
+ ])
+-SED=$lt_cv_path_SED
+-AC_SUBST([SED])
+-AC_MSG_RESULT([$SED])
+-])#AC_PROG_SED
+-])#m4_ifndef
+
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+ dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_SED], [])
++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+-# _LT_CHECK_SHELL_FEATURES
+-# ------------------------
+-# Find out whether the shell is Bourne or XSI compatible,
+-# or has some other useful features.
+-m4_defun([_LT_CHECK_SHELL_FEATURES],
+-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+-# Try some XSI features
+-xsi_shell=no
+-( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
+- && eval 'test $(( 1 + 1 )) -eq 2 \
+- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+- && xsi_shell=yes
+-AC_MSG_RESULT([$xsi_shell])
+-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
++# _LT_WITH_PIC([MODE])
++# --------------------
++# implement the --with-pic flag, and support the `pic-only' and `no-pic'
++# LT_INIT options.
++# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
++m4_define([_LT_WITH_PIC],
++[AC_ARG_WITH([pic],
++ [AS_HELP_STRING([--with-pic],
++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++ [pic_mode="$withval"],
++ [pic_mode=default])
++
++test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
++
++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
++])# _LT_WITH_PIC
+
+-AC_MSG_CHECKING([whether the shell understands "+="])
+-lt_shell_append=no
+-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+- >/dev/null 2>&1 \
+- && lt_shell_append=yes
+-AC_MSG_RESULT([$lt_shell_append])
+-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+- lt_unset=unset
+-else
+- lt_unset=false
+-fi
+-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
++# Old name:
++AU_DEFUN([AC_LIBTOOL_PICMODE],
++[_LT_SET_OPTION([LT_INIT], [pic-only])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `pic-only' option into LT_INIT's first parameter.])
++])
+
+-# test EBCDIC or ASCII
+-case `echo X|tr X '\101'` in
+- A) # ASCII based system
+- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+- lt_SP2NL='tr \040 \012'
+- lt_NL2SP='tr \015\012 \040\040'
+- ;;
+- *) # EBCDIC based system
+- lt_SP2NL='tr \100 \n'
+- lt_NL2SP='tr \r\n \100\100'
+- ;;
+-esac
+-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+-])# _LT_CHECK_SHELL_FEATURES
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
++m4_define([_LTDL_MODE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
++ [m4_define([_LTDL_MODE], [nonrecursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [recursive],
++ [m4_define([_LTDL_MODE], [recursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [subproject],
++ [m4_define([_LTDL_MODE], [subproject])])
+
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
++m4_define([_LTDL_TYPE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [installable],
++ [m4_define([_LTDL_TYPE], [installable])])
++LT_OPTION_DEFINE([LTDL_INIT], [convenience],
++ [m4_define([_LTDL_TYPE], [convenience])])
+
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
++#
++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
+
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
++# serial 6 ltsugar.m4
+
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
++# lt_join(SEP, ARG1, [ARG2...])
++# -----------------------------
++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
++# associated separator.
++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
++# versions in m4sugar had bugs.
++m4_define([lt_join],
++[m4_if([$#], [1], [],
++ [$#], [2], [[$2]],
++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
++m4_define([_lt_join],
++[m4_if([$#$2], [2], [],
++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
++# lt_car(LIST)
++# lt_cdr(LIST)
++# ------------
++# Manipulate m4 lists.
++# These macros are necessary as long as will still need to support
++# Autoconf-2.59 which quotes differently.
++m4_define([lt_car], [[$1]])
++m4_define([lt_cdr],
++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
++ [$#], 1, [],
++ [m4_dquote(m4_shift($@))])])
++m4_define([lt_unquote], $1)
+
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
+
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
++# lt_append(MACRO-NAME, STRING, [SEPARATOR])
++# ------------------------------------------
++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
++# Note that neither SEPARATOR nor STRING are expanded; they are appended
++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
++# No SEPARATOR is output if MACRO-NAME was previously undefined (different
++# than defined and empty).
++#
++# This macro is needed until we can rely on Autoconf 2.62, since earlier
++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
++m4_define([lt_append],
++[m4_define([$1],
++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
+
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
+
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
++# ----------------------------------------------------------
++# Produce a SEP delimited list of all paired combinations of elements of
++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
++# has the form PREFIXmINFIXSUFFIXn.
++# Needed until we can rely on m4_combine added in Autoconf 2.62.
++m4_define([lt_combine],
++[m4_if(m4_eval([$# > 3]), [1],
++ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
++[[m4_foreach([_Lt_prefix], [$2],
++ [m4_foreach([_Lt_suffix],
++ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
++ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
++
++
++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
++# -----------------------------------------------------------------------
++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
++m4_define([lt_if_append_uniq],
++[m4_ifdef([$1],
++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
++ [lt_append([$1], [$2], [$3])$4],
++ [$5])],
++ [lt_append([$1], [$2], [$3])$4])])
++
++
++# lt_dict_add(DICT, KEY, VALUE)
++# -----------------------------
++m4_define([lt_dict_add],
++[m4_define([$1($2)], [$3])])
+
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+- esac
+-}
+
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
++# --------------------------------------------
++m4_define([lt_dict_add_subkey],
++[m4_define([$1($2:$3)], [$4])])
+
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
+
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
++# lt_dict_fetch(DICT, KEY, [SUBKEY])
++# ----------------------------------
++m4_define([lt_dict_fetch],
++[m4_ifval([$3],
++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
+
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
++# -----------------------------------------------------------------
++m4_define([lt_if_dict_fetch],
++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
++ [$5],
++ [$6])])
+
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
+
+-_LT_EOF
+-esac
++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
++# --------------------------------------------------------------
++m4_define([lt_dict_filter],
++[m4_if([$5], [], [],
++ [lt_join(m4_quote(m4_default([$4], [[, ]])),
++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
++])
+
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
++# ltversion.m4 -- version numbers -*- Autoconf -*-
++#
++# Copyright (C) 2004 Free Software Foundation, Inc.
++# Written by Scott James Remnant, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
+
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
+- ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
++# Generated from ltversion.in.
+
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
++# serial 3017 ltversion.m4
++# This file is part of GNU Libtool
+
+-_LT_EOF
+- ;;
+- esac
++m4_define([LT_PACKAGE_VERSION], [2.2.6b])
++m4_define([LT_PACKAGE_REVISION], [1.3017])
++
++AC_DEFUN([LTVERSION_VERSION],
++[macro_version='2.2.6b'
++macro_revision='1.3017'
++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
++_LT_DECL(, macro_revision, 0)
+ ])
+
+-# Helper functions for option handling. -*- Autoconf -*-
++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
- # This file is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
-@@ -6599,7 +6615,7 @@
- [am__api_version='1.10'
- dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
- dnl require some minimum version. Point them to the right macro.
--m4_if([$1], [1.10], [],
-+m4_if([$1], [1.10.1], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
- ])
-
-@@ -6615,8 +6631,10 @@
- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
- # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
--[AM_AUTOMAKE_VERSION([1.10])dnl
--_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
-+[AM_AUTOMAKE_VERSION([1.10.1])dnl
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gary V. Vaughan, 2004
++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++# Written by Scott James Remnant, 2004.
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 6 ltoptions.m4
++# serial 4 lt~obsolete.m4
++
++# These exist entirely to fool aclocal when bootstrapping libtool.
++#
++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
++# which have later been changed to m4_define as they aren't part of the
++# exported API, or moved to Autoconf or Automake where they belong.
++#
++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
++# using a macro with the same name in our local m4/libtool.m4 it'll
++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
++# and doesn't know about Autoconf macros at all.)
++#
++# So we provide this file, which has a silly filename so it's always
++# included after everything else. This provides aclocal with the
++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
++# because those macros already exist, or will be overwritten later.
++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
++#
++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
++# Yes, that means every name once taken will need to remain here until
++# we give up compatibility with versions before 1.7, at which point
++# we need to keep only those names which we still refer to.
+
+ # This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
++
++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
++m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+
++# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+-# ------------------------------------------
+-m4_define([_LT_MANGLE_OPTION],
+-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++# (This private macro should not be called outside this file.)
++AC_DEFUN([AM_AUTOMAKE_VERSION],
++[am__api_version='1.11'
++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
++dnl require some minimum version. Point them to the right macro.
++m4_if([$1], [1.11.1], [],
++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
++])
++
++# _AM_AUTOCONF_VERSION(VERSION)
++# -----------------------------
++# aclocal traces this macro to find the Autoconf version.
++# This is a private macro too. Using m4_define simplifies
++# the logic in aclocal, which can simply ignore this definition.
++m4_define([_AM_AUTOCONF_VERSION], [])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
-
- # AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-@@ -6888,7 +6906,7 @@
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
-- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
-+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
++
++# AM_AUX_DIR_EXPAND -*- Autoconf -*-
++
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
+
+-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+-# ---------------------------------------
+-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+-# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+-# saved as a flag.
+-m4_define([_LT_SET_OPTION],
+-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+- _LT_MANGLE_DEFUN([$1], [$2]),
+- [m4_warning([Unknown $1 option `$2'])])[]dnl
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
+ ])
+
++# AM_CONDITIONAL -*- Autoconf -*-
+
+-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+-# ------------------------------------------------------------
+-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+-m4_define([_LT_IF_OPTION],
+-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# serial 9
+
+-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+-# -------------------------------------------------------
+-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+-# are set.
+-m4_define([_LT_UNLESS_OPTIONS],
+-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+- [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+- [m4_define([$0_found])])])[]dnl
+-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+-])[]dnl
+-])
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])dnl
++AC_SUBST([$1_FALSE])dnl
++_AM_SUBST_NOTMAKE([$1_TRUE])dnl
++_AM_SUBST_NOTMAKE([$1_FALSE])dnl
++m4_define([_AM_COND_VALUE_$1], [$2])dnl
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
++else
++ $1_TRUE='#'
++ $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
+
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+-# ----------------------------------------
+-# OPTION-LIST is a space-separated list of Libtool options associated
+-# with MACRO-NAME. If any OPTION has a matching handler declared with
+-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+-# the unknown option and exit.
+-m4_defun([_LT_SET_OPTIONS],
+-[# Set options
+-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+- [_LT_SET_OPTION([$1], _LT_Option)])
++# serial 10
+
+-m4_if([$1],[LT_INIT],[
+- dnl
+- dnl Simply set some default values (i.e off) if boolean options were not
+- dnl specified:
+- _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+- ])
+- _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+- ])
+- dnl
+- dnl If no reference was made to various pairs of opposing options, then
+- dnl we run the default mode handler for the pair. For example, if neither
+- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+- dnl archives by default:
+- _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+- _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+- _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+- _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+- [_LT_ENABLE_FAST_INSTALL])
+- ])
+-])# _LT_SET_OPTIONS
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
+
+-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+-# -----------------------------------------
+-m4_define([_LT_MANGLE_DEFUN],
+-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
++ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
++ [$1], CXX, [depcc="$CXX" am_compiler_list=],
++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++ [$1], UPC, [depcc="$UPC" am_compiler_list=],
++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
+
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
+
+-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+-# -----------------------------------------------
+-m4_define([LT_OPTION_DEFINE],
+-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+-])# LT_OPTION_DEFINE
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ am__universal=false
++ m4_case([$1], [CC],
++ [case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac],
++ [CXX],
++ [case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac])
+
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+-# dlopen
+-# ------
+-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this. Also, some Intel
++ # versions had trouble with output in subdirs
++ am__obj=sub/conftest.${OBJEXT-o}
++ am__minus_obj="-o $am__obj"
++ case $depmode in
++ gcc)
++ # This depmode causes a compiler race in universal mode.
++ test "$am__universal" = false || continue
++ ;;
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ msvisualcpp | msvcmsys)
++ # This compiler won't grok `-c -o', but also, the minuso test has
++ # not run yet. These depmodes are late enough in the game, and
++ # so weak that their functioning should not be impacted.
++ am__obj=conftest.${OBJEXT-o}
++ am__minus_obj=
++ ;;
++ none) break ;;
++ esac
++ if depmode=$depmode \
++ source=sub/conftest.c object=$am__obj \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_$1_dependencies_compiler_type=none
++fi
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+ ])
+
+-AU_DEFUN([AC_LIBTOOL_DLOPEN],
+-[_LT_SET_OPTION([LT_INIT], [dlopen])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `dlopen' option into LT_INIT's first parameter.])
++
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+ ])
+
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])dnl
++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
++])
+
+-# win32-dll
+-# ---------
+-# Declare package support for building win32 dll's.
+-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+-[enable_win32_dll=yes
++# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+-case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+- AC_CHECK_TOOL(AS, as, false)
+- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+- AC_CHECK_TOOL(OBJDUMP, objdump, false)
+- ;;
+-esac
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-test -z "$AS" && AS=as
+-_LT_DECL([], [AS], [0], [Assembler program])dnl
++#serial 5
+
+-test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[{
++ # Autoconf 2.62 quotes --file arguments for eval, but not when files
++ # are listed without --file. Let's play safe and only enable the eval
++ # if we detect the quoting.
++ case $CONFIG_FILES in
++ *\'*) eval set x "$CONFIG_FILES" ;;
++ *) set x $CONFIG_FILES ;;
++ esac
++ shift
++ for mf
++ do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # Grep'ing the whole file is not good either: AIX grep has a line
++ # limit of 2048, but all sed's we know have understand at least 4000.
++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
++ dirpart=`AS_DIRNAME("$mf")`
++ else
++ continue
++ fi
++ # Extract the definition of DEPDIR, am__include, and am__quote
++ # from the Makefile without running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ am__include=`sed -n 's/^am__include = //p' < "$mf"`
++ test -z "am__include" && continue
++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ # Find all dependency output files, they are included files with
++ # $(DEPDIR) in their names. We invoke sed twice because it is the
++ # simplest approach to changing $(DEPDIR) to its actual value in the
++ # expansion.
++ for file in `sed -n "
++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`AS_DIRNAME(["$file"])`
++ AS_MKDIR_P([$dirpart/$fdir])
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++ done
++}
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+-])# win32-dll
+
+-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-_LT_SET_OPTION([LT_INIT], [win32-dll])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `win32-dll' option into LT_INIT's first parameter.])
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled. FIXME. This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+ ])
+
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
++# Do all the work for Automake. -*- Autoconf -*-
+
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# _LT_ENABLE_SHARED([DEFAULT])
+-# ----------------------------
+-# implement the --enable-shared flag, and supports the `shared' and
+-# `disable-shared' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_SHARED],
+-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([shared],
+- [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+- [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_shared=yes ;;
+- no) enable_shared=no ;;
+- *)
+- enable_shared=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_shared=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
++# serial 16
+
+- _LT_DECL([build_libtool_libs], [enable_shared], [0],
+- [Whether or not to build shared libraries])
+-])# _LT_ENABLE_SHARED
++# This macro actually does too much. Some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
+
+-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.62])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++ fi
++fi
+
+-# Old names:
+-AC_DEFUN([AC_ENABLE_SHARED],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++ [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_CC],
++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_CXX],
++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJC],
++ [_AM_DEPENDENCIES(OBJC)],
++ [define([AC_PROG_OBJC],
++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ ])
+-
+-AC_DEFUN([AC_DISABLE_SHARED],
+-[_LT_SET_OPTION([LT_INIT], [disable-shared])
++_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
++dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
++dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
++dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
++AC_CONFIG_COMMANDS_PRE(dnl
++[m4_provide_if([_AM_COMPILER_EXEEXT],
++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+ ])
+
+-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
++dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
++dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
++dnl mangled by Autoconf and run in a shell conditional statement.
++m4_define([_AC_COMPILER_EXEEXT],
++m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
+
+-# _LT_ENABLE_STATIC([DEFAULT])
+-# ----------------------------
+-# implement the --enable-static flag, and support the `static' and
+-# `disable-static' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_STATIC],
+-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([static],
+- [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+- [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_static=yes ;;
+- no) enable_static=no ;;
+- *)
+- enable_static=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_static=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_arg=$1
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+- _LT_DECL([build_old_libs], [enable_static], [0],
+- [Whether or not to build static libraries])
+-])# _LT_ENABLE_STATIC
++# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++if test x"${install_sh}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
++ *)
++ install_sh="\${SHELL} $am_aux_dir/install-sh"
++ esac
++fi
++AC_SUBST(install_sh)])
+
+-# Old names:
+-AC_DEFUN([AC_ENABLE_STATIC],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+-])
++# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-AC_DEFUN([AC_DISABLE_STATIC],
+-[_LT_SET_OPTION([LT_INIT], [disable-static])
+-])
++# serial 2
+
+-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
+
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
++# From Jim Meyering
+
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# serial 5
+
+-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
++# AM_MAINTAINER_MODE([DEFAULT-MODE])
+ # ----------------------------------
+-# implement the --enable-fast-install flag, and support the `fast-install'
+-# and `disable-fast-install' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_FAST_INSTALL],
+-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([fast-install],
+- [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+- [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_fast_install=yes ;;
+- no) enable_fast_install=no ;;
+- *)
+- enable_fast_install=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_fast_install=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+-
+-_LT_DECL([fast_install], [enable_fast_install], [0],
+- [Whether or not to optimize for fast installation])dnl
+-])# _LT_ENABLE_FAST_INSTALL
+-
+-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+-
+-# Old names:
+-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+-the `fast-install' option into LT_INIT's first parameter.])
+-])
+-
+-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+-the `disable-fast-install' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+-
++# Control maintainer-specific portions of Makefiles.
++# Default is to disable them, unless `enable' is passed literally.
++# For symmetry, `disable' may be passed as well. Anyway, the user
++# can override the default with the --enable/--disable switch.
++AC_DEFUN([AM_MAINTAINER_MODE],
++[m4_case(m4_default([$1], [disable]),
++ [enable], [m4_define([am_maintainer_other], [disable])],
++ [disable], [m4_define([am_maintainer_other], [enable])],
++ [m4_define([am_maintainer_other], [enable])
++ m4_warn([syntax], [unexpected argument to AM@&t at _MAINTAINER_MODE: $1])])
++AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
++ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
++ AC_ARG_ENABLE([maintainer-mode],
++[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
++ (and sometimes confusing) to the casual installer],
++ [USE_MAINTAINER_MODE=$enableval],
++ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
++ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
++ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
++ MAINT=$MAINTAINER_MODE_TRUE
++ AC_SUBST([MAINT])dnl
++]
++)
+
+-# _LT_WITH_PIC([MODE])
+-# --------------------
+-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+-# LT_INIT options.
+-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+-m4_define([_LT_WITH_PIC],
+-[AC_ARG_WITH([pic],
+- [AS_HELP_STRING([--with-pic],
+- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+- [pic_mode="$withval"],
+- [pic_mode=default])
++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
++# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+-])# _LT_WITH_PIC
++# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
++# serial 4
+
+-# Old name:
+-AU_DEFUN([AC_LIBTOOL_PICMODE],
+-[_LT_SET_OPTION([LT_INIT], [pic-only])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `pic-only' option into LT_INIT's first parameter.])
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo this is the am__doit target
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# Ignore all kinds of additional output from `make'.
++case `$am_make -s -f confmf 2> /dev/null` in #(
++*the\ am__doit\ target*)
++ am__include=include
++ am__quote=
++ _am_result=GNU
++ ;;
++esac
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ case `$am_make -s -f confmf 2> /dev/null` in #(
++ *the\ am__doit\ target*)
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ ;;
++ esac
++fi
++AC_SUBST([am__include])
++AC_SUBST([am__quote])
++AC_MSG_RESULT([$_am_result])
++rm -f confinc confmf
+ ])
+
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+-
+-
+-m4_define([_LTDL_MODE], [])
+-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+- [m4_define([_LTDL_MODE], [nonrecursive])])
+-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+- [m4_define([_LTDL_MODE], [recursive])])
+-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+- [m4_define([_LTDL_MODE], [subproject])])
+-
+-m4_define([_LTDL_TYPE], [])
+-LT_OPTION_DEFINE([LTDL_INIT], [installable],
+- [m4_define([_LTDL_TYPE], [installable])])
+-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+- [m4_define([_LTDL_TYPE], [convenience])])
++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+-#
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gary V. Vaughan, 2004
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
++# Free Software Foundation, Inc.
+ #
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 6 ltsugar.m4
++# serial 6
+
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
+
+
+-# lt_join(SEP, ARG1, [ARG2...])
+-# -----------------------------
+-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+-# associated separator.
+-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+-# versions in m4sugar had bugs.
+-m4_define([lt_join],
+-[m4_if([$#], [1], [],
+- [$#], [2], [[$2]],
+- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+-m4_define([_lt_join],
+-[m4_if([$#$2], [2], [],
+- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([missing])dnl
++if test x"${MISSING+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
++ *)
++ MISSING="\${SHELL} $am_aux_dir/missing" ;;
++ esac
++fi
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
+
++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# lt_car(LIST)
+-# lt_cdr(LIST)
+-# ------------
+-# Manipulate m4 lists.
+-# These macros are necessary as long as will still need to support
+-# Autoconf-2.59 which quotes differently.
+-m4_define([lt_car], [[$1]])
+-m4_define([lt_cdr],
+-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+- [$#], 1, [],
+- [m4_dquote(m4_shift($@))])])
+-m4_define([lt_unquote], $1)
++# AM_PROG_MKDIR_P
++# ---------------
++# Check for `mkdir -p'.
++AC_DEFUN([AM_PROG_MKDIR_P],
++[AC_PREREQ([2.60])dnl
++AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
++dnl while keeping a definition of mkdir_p for backward compatibility.
++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
++dnl Makefile.ins that do not define MKDIR_P, so we do our own
++dnl adjustment using top_builddir (which is defined more often than
++dnl MKDIR_P).
++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
++case $mkdir_p in
++ [[\\/$]]* | ?:[[\\/]]*) ;;
++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
++])
+
++# Helper functions for option handling. -*- Autoconf -*-
+
+-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+-# ------------------------------------------
+-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+-# Note that neither SEPARATOR nor STRING are expanded; they are appended
+-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+-# than defined and empty).
++# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+ #
+-# This macro is needed until we can rely on Autoconf 2.62, since earlier
+-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+-m4_define([lt_append],
+-[m4_define([$1],
+- m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+-
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# serial 4
+
+-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+-# ----------------------------------------------------------
+-# Produce a SEP delimited list of all paired combinations of elements of
+-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+-# has the form PREFIXmINFIXSUFFIXn.
+-# Needed until we can rely on m4_combine added in Autoconf 2.62.
+-m4_define([lt_combine],
+-[m4_if(m4_eval([$# > 3]), [1],
+- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+-[[m4_foreach([_Lt_prefix], [$2],
+- [m4_foreach([_Lt_suffix],
+- ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+- [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+-# -----------------------------------------------------------------------
+-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+-m4_define([lt_if_append_uniq],
+-[m4_ifdef([$1],
+- [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+- [lt_append([$1], [$2], [$3])$4],
+- [$5])],
+- [lt_append([$1], [$2], [$3])$4])])
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+-# lt_dict_add(DICT, KEY, VALUE)
+-# -----------------------------
+-m4_define([lt_dict_add],
+-[m4_define([$1($2)], [$3])])
++# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+-# --------------------------------------------
+-m4_define([lt_dict_add_subkey],
+-[m4_define([$1($2:$3)], [$4])])
++# serial 5
+
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
++[AC_MSG_CHECKING([whether build environment is sane])
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Reject unsafe characters in $srcdir or the absolute working directory
++# name. Accept space and tab only in the latter.
++am_lf='
++'
++case `pwd` in
++ *[[\\\"\#\$\&\'\`$am_lf]]*)
++ AC_MSG_ERROR([unsafe absolute working directory name]);;
++esac
++case $srcdir in
++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
++ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
++esac
+
+-# lt_dict_fetch(DICT, KEY, [SUBKEY])
+-# ----------------------------------
+-m4_define([lt_dict_fetch],
+-[m4_ifval([$3],
+- m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+- m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments. Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
++ # -L didn't work.
++ set X `ls -t "$srcdir/configure" conftest.file`
++ fi
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
++ # If neither matched, then we have a broken ls. This can happen
++ # if, for instance, CONFIG_SHELL is bash and it inherits a
++ # broken ls alias from the environment. This has actually
++ # happened. Such a system could not be considered "sane".
++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
++alias in your environment])
++ fi
+
+-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+-# -----------------------------------------------------------------
+-m4_define([lt_if_dict_fetch],
+-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+- [$5],
+- [$6])])
++ test "$[2]" = conftest.file
++ )
++then
++ # Ok.
++ :
++else
++ AC_MSG_ERROR([newly created file is older than distributed files!
++Check your system clock])
++fi
++AC_MSG_RESULT(yes)])
+
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+-# --------------------------------------------------------------
+-m4_define([lt_dict_filter],
+-[m4_if([$5], [], [],
+- [lt_join(m4_quote(m4_default([$4], [[, ]])),
+- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+- [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+-])
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+-# ltversion.m4 -- version numbers -*- Autoconf -*-
+-#
+-# Copyright (C) 2004 Free Software Foundation, Inc.
+-# Written by Scott James Remnant, 2004
++# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+ #
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# Generated from ltversion.in.
++# serial 2
+
+-# serial 3012 ltversion.m4
+-# This file is part of GNU Libtool
++# _AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
++# This macro is traced by Automake.
++AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+-m4_define([LT_PACKAGE_VERSION], [2.2.6])
+-m4_define([LT_PACKAGE_REVISION], [1.3012])
++# AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Public sister of _AM_SUBST_NOTMAKE.
++AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+-AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6'
+-macro_revision='1.3012'
+-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+-_LT_DECL(, macro_revision, 0)
+-])
++# Check how to create a tarball. -*- Autoconf -*-
+
+-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+-#
+-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+-# Written by Scott James Remnant, 2004.
++# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+ #
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 4 lt~obsolete.m4
++# serial 2
+
+-# These exist entirely to fool aclocal when bootstrapping libtool.
+-#
+-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+-# which have later been changed to m4_define as they aren't part of the
+-# exported API, or moved to Autoconf or Automake where they belong.
+-#
+-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+-# using a macro with the same name in our local m4/libtool.m4 it'll
+-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+-# and doesn't know about Autoconf macros at all.)
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of `v7', `ustar', or `pax'.
+ #
+-# So we provide this file, which has a silly filename so it's always
+-# included after everything else. This provides aclocal with the
+-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+-# because those macros already exist, or will be overwritten later.
+-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++# tardir=directory && $(am__tar) > result.tar
+ #
+-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+-# Yes, that means every name once taken will need to remain here until
+-# we give up compatibility with versions before 1.7, at which point
+-# we need to keep only those names which we still refer to.
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++# $(am__untar) < result.tar
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility.
++AM_MISSING_PROG([AMTAR], [tar])
++m4_if([$1], [v7],
++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
++ [m4_case([$1], [ustar],, [pax],,
++ [m4_fatal([Unknown tar format])])
++AC_MSG_CHECKING([how to create a $1 tar archive])
++# Loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++_am_tools=${am_cv_prog_tar_$1-$_am_tools}
++# Do not fold the above two line into one, because Tru64 sh and
++# Solaris sh will not grok spaces in the rhs of `-'.
++for _am_tool in $_am_tools
++do
++ case $_am_tool in
++ gnutar)
++ for _am_tar in tar gnutar gtar;
++ do
++ AM_RUN_LOG([$_am_tar --version]) && break
++ done
++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++ am__untar="$_am_tar -xf -"
++ ;;
++ plaintar)
++ # Must skip GNU tar: if it does not support --format= it doesn't create
++ # ustar tarball either.
++ (tar --version) >/dev/null 2>&1 && continue
++ am__tar='tar chf - "$$tardir"'
++ am__tar_='tar chf - "$tardir"'
++ am__untar='tar xf -'
++ ;;
++ pax)
++ am__tar='pax -L -x $1 -w "$$tardir"'
++ am__tar_='pax -L -x $1 -w "$tardir"'
++ am__untar='pax -r'
++ ;;
++ cpio)
++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++ am__untar='cpio -i -H $1 -d'
++ ;;
++ none)
++ am__tar=false
++ am__tar_=false
++ am__untar=false
++ ;;
++ esac
+
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
++ # If the value was cached, stop now. We just wanted to have am__tar
++ # and am__untar set.
++ test -n "${am_cv_prog_tar_$1}" && break
+
+-m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+-m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+-m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+-m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+-m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+-m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+-m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+-m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+-m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+-m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+-m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+-m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+-m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+-m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+-m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+-m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+-m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+-m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+-m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+-m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+-m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+-m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+-m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+-m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+-m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+-m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+-m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+-m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++ # tar/untar a dummy directory, and stop if the command works
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ echo GrepMe > conftest.dir/file
++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++ rm -rf conftest.dir
++ if test -s conftest.tar; then
++ AM_RUN_LOG([$am__untar <conftest.tar])
++ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
++ fi
++done
++rm -rf conftest.dir
++
++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++AC_MSG_RESULT([$am_cv_prog_tar_$1])])
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
+
+diff '-x*config.guess' '-x*config.sub' -Naur libart-lgpl-2.3.21.old/config.h.in libart-lgpl-2.3.21/config.h.in
+--- libart-lgpl-2.3.21.old/config.h.in 2010-04-01 15:39:46.000000000 +0200
++++ libart-lgpl-2.3.21/config.h.in 2010-04-25 11:34:16.760352370 +0200
+@@ -67,6 +67,9 @@
+ /* Define to the one symbol short name of this package. */
+ #undef PACKAGE_TARNAME
+
++/* Define to the home page for this package. */
++#undef PACKAGE_URL
++
+ /* Define to the version of this package. */
+ #undef PACKAGE_VERSION
+
+diff '-x*config.guess' '-x*config.sub' -Naur libart-lgpl-2.3.21.old/configure libart-lgpl-2.3.21/configure
+--- libart-lgpl-2.3.21.old/configure 2010-04-01 15:39:46.000000000 +0200
++++ libart-lgpl-2.3.21/configure 2010-04-25 11:34:16.335352537 +0200
+@@ -1,20 +1,24 @@
+ #! /bin/sh
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.63 for libart-lgpl 2.3.21.
++# Generated by GNU Autoconf 2.65 for libart-lgpl 2.3.21.
+ #
+ # Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=libart>.
+ #
++#
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
++# Inc.
++#
++#
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+-## --------------------- ##
+-## M4sh Initialization. ##
+-## --------------------- ##
++## -------------------- ##
++## M4sh Initialization. ##
++## -------------------- ##
+
+ # Be more Bourne compatible
+ DUALCASE=1; export DUALCASE # for MKS sh
+-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+@@ -22,23 +26,15 @@
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+ else
+- case `(set -o) 2>/dev/null` in
+- *posix*) set -o posix ;;
++ case `(set -o) 2>/dev/null` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
+ esac
+-
+ fi
+
+
+-
+-
+-# PATH needs CR
+-# Avoid depending upon Character Ranges.
+-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+-as_cr_digits='0123456789'
+-as_cr_alnum=$as_cr_Letters$as_cr_digits
+-
+ as_nl='
+ '
+ export as_nl
+@@ -46,7 +42,13 @@
+ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+ as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++# Prefer a ksh shell builtin over an external printf program on Solaris,
++# but without wasting forks for bash or zsh.
++if test -z "$BASH_VERSION$ZSH_VERSION" \
++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='print -r --'
++ as_echo_n='print -rn --'
++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+ else
+@@ -57,7 +59,7 @@
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+- case $arg in
++ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+@@ -80,13 +82,6 @@
+ }
+ fi
+
+-# Support unset when possible.
+-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+- as_unset=unset
+-else
+- as_unset=false
+-fi
+-
+
+ # IFS
+ # We need space, tab and new line, in precisely that order. Quoting is
+@@ -96,15 +91,15 @@
+ IFS=" "" $as_nl"
+
+ # Find who we are. Look in the path if we contain no directory separator.
+-case $0 in
++case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ for as_dir in $PATH
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+-done
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++ done
+ IFS=$as_save_IFS
+
+ ;;
+@@ -116,12 +111,16 @@
+ fi
+ if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+- { (exit 1); exit 1; }
++ exit 1
+ fi
+
+-# Work around bugs in pre-3.0 UWIN ksh.
+-for as_var in ENV MAIL MAILPATH
+-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++# Unset variables that we do not need and which cause bugs (e.g. in
++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
++# suppresses any "Segmentation fault" message there. '((' could
++# trigger a bug in pdksh 5.2.14.
++for as_var in BASH_ENV ENV MAIL MAILPATH
++do eval test x\${$as_var+set} = xset \
++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+ done
+ PS1='$ '
+ PS2='> '
+@@ -133,330 +132,301 @@
+ LANGUAGE=C
+ export LANGUAGE
+
+-# Required to use basename.
+-if expr a : '\(a\)' >/dev/null 2>&1 &&
+- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+- as_expr=expr
+-else
+- as_expr=false
+-fi
+-
+-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+- as_basename=basename
+-else
+- as_basename=false
+-fi
+-
+-
+-# Name of the executable.
+-as_me=`$as_basename -- "$0" ||
+-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+- X"$0" : 'X\(//\)$' \| \
+- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X/"$0" |
+- sed '/^.*\/\([^/][^/]*\)\/*$/{
+- s//\1/
+- q
+- }
+- /^X\/\(\/\/\)$/{
+- s//\1/
+- q
+- }
+- /^X\/\(\/\).*/{
+- s//\1/
+- q
+- }
+- s/.*/./; q'`
+-
+ # CDPATH.
+-$as_unset CDPATH
+-
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+ if test "x$CONFIG_SHELL" = x; then
+- if (eval ":") 2>/dev/null; then
+- as_have_required=yes
++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '\${1+\"\$@\"}'='\"\$@\"'
++ setopt NO_GLOB_SUBST
+ else
+- as_have_required=no
++ case \`(set -o) 2>/dev/null\` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
+ fi
+-
+- if test $as_have_required = yes && (eval ":
+-(as_func_return () {
+- (exit \$1)
+-}
+-as_func_success () {
+- as_func_return 0
+-}
+-as_func_failure () {
+- as_func_return 1
+-}
+-as_func_ret_success () {
+- return 0
+-}
+-as_func_ret_failure () {
+- return 1
+-}
++"
++ as_required="as_fn_return () { (exit \$1); }
++as_fn_success () { as_fn_return 0; }
++as_fn_failure () { as_fn_return 1; }
++as_fn_ret_success () { return 0; }
++as_fn_ret_failure () { return 1; }
+
+ exitcode=0
+-if as_func_success; then
+- :
+-else
+- exitcode=1
+- echo as_func_success failed.
+-fi
+-
+-if as_func_failure; then
+- exitcode=1
+- echo as_func_failure succeeded.
+-fi
+-
+-if as_func_ret_success; then
+- :
+-else
+- exitcode=1
+- echo as_func_ret_success failed.
+-fi
+-
+-if as_func_ret_failure; then
+- exitcode=1
+- echo as_func_ret_failure succeeded.
+-fi
+-
+-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+- :
++as_fn_success || { exitcode=1; echo as_fn_success failed.; }
++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
++
++else
++ exitcode=1; echo positional parameters were not saved.
++fi
++test x\$exitcode = x0 || exit 1"
++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
++test \$(( 1 + 1 )) = 2 || exit 1"
++ if (eval "$as_required") 2>/dev/null; then :
++ as_have_required=yes
+ else
+- exitcode=1
+- echo positional parameters were not saved.
++ as_have_required=no
+ fi
++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+-test \$exitcode = 0) || { (exit 1); exit 1; }
+-
+-(
+- as_lineno_1=\$LINENO
+- as_lineno_2=\$LINENO
+- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+-") 2> /dev/null; then
+- :
+ else
+- as_candidate_shells=
+- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++as_found=false
+ for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- case $as_dir in
++ as_found=:
++ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
++ # Try only shells that exist, to save several forks.
++ as_shell=$as_dir/$as_base
++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
++ CONFIG_SHELL=$as_shell as_have_required=yes
++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
++ break 2
++fi
++fi
+ done;;
+ esac
++ as_found=false
+ done
++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
++ CONFIG_SHELL=$SHELL as_have_required=yes
++fi; }
+ IFS=$as_save_IFS
+
+
+- for as_shell in $as_candidate_shells $SHELL; do
+- # Try only shells that exist, to save several forks.
+- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+- { ("$as_shell") 2> /dev/null <<\_ASEOF
+-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+- emulate sh
+- NULLCMD=:
+- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+- # is contrary to our usage. Disable this feature.
+- alias -g '${1+"$@"}'='"$@"'
+- setopt NO_GLOB_SUBST
+-else
+- case `(set -o) 2>/dev/null` in
+- *posix*) set -o posix ;;
+-esac
+-
+-fi
+-
+-
+-:
+-_ASEOF
+-}; then
+- CONFIG_SHELL=$as_shell
+- as_have_required=yes
+- if { "$as_shell" 2> /dev/null <<\_ASEOF
+-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+- emulate sh
+- NULLCMD=:
+- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+- # is contrary to our usage. Disable this feature.
+- alias -g '${1+"$@"}'='"$@"'
+- setopt NO_GLOB_SUBST
+-else
+- case `(set -o) 2>/dev/null` in
+- *posix*) set -o posix ;;
+-esac
+-
+-fi
+-
+-
+-:
+-(as_func_return () {
+- (exit $1)
+-}
+-as_func_success () {
+- as_func_return 0
+-}
+-as_func_failure () {
+- as_func_return 1
+-}
+-as_func_ret_success () {
+- return 0
+-}
+-as_func_ret_failure () {
+- return 1
+-}
+-
+-exitcode=0
+-if as_func_success; then
+- :
+-else
+- exitcode=1
+- echo as_func_success failed.
+-fi
+-
+-if as_func_failure; then
+- exitcode=1
+- echo as_func_failure succeeded.
+-fi
+-
+-if as_func_ret_success; then
+- :
+-else
+- exitcode=1
+- echo as_func_ret_success failed.
+-fi
+-
+-if as_func_ret_failure; then
+- exitcode=1
+- echo as_func_ret_failure succeeded.
+-fi
+-
+-if ( set x; as_func_ret_success y && test x = "$1" ); then
+- :
+-else
+- exitcode=1
+- echo positional parameters were not saved.
+-fi
+-
+-test $exitcode = 0) || { (exit 1); exit 1; }
+-
+-(
+- as_lineno_1=$LINENO
+- as_lineno_2=$LINENO
+- test "x$as_lineno_1" != "x$as_lineno_2" &&
+- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+-
+-_ASEOF
+-}; then
+- break
+-fi
+-
+-fi
+-
+- done
+-
+- if test "x$CONFIG_SHELL" != x; then
+- for as_var in BASH_ENV ENV
+- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+- done
++ if test "x$CONFIG_SHELL" != x; then :
++ # We cannot yet assume a decent shell, so we have to provide a
++ # neutralization value for shells without unset; and this also
++ # works around shells that cannot unset nonexistent variables.
++ BASH_ENV=/dev/null
++ ENV=/dev/null
++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ fi
+
+-
+- if test $as_have_required = no; then
+- echo This script requires a shell more modern than all the
+- echo shells that I found on your system. Please install a
+- echo modern shell, or manually run the script under such a
+- echo shell if you do have one.
+- { (exit 1); exit 1; }
++ if test x$as_have_required = xno; then :
++ $as_echo "$0: This script requires a shell more modern than all"
++ $as_echo "$0: the shells that I found on your system."
++ if test x${ZSH_VERSION+set} = xset ; then
++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
++ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
++ else
++ $as_echo "$0: Please tell bug-autoconf at gnu.org and
++$0: http://bugzilla.gnome.org/enter_bug.cgi?product=libart
++$0: about your system, including any error possibly output
++$0: before this message. Then install a modern shell, or
++$0: manually run the script under such a shell if you do
++$0: have one."
++ fi
++ exit 1
+ fi
+-
+-
+ fi
+-
+ fi
++SHELL=${CONFIG_SHELL-/bin/sh}
++export SHELL
++# Unset more variables known to interfere with behavior of common tools.
++CLICOLOR_FORCE= GREP_OPTIONS=
++unset CLICOLOR_FORCE GREP_OPTIONS
++
++## --------------------- ##
++## M4sh Shell Functions. ##
++## --------------------- ##
++# as_fn_unset VAR
++# ---------------
++# Portably unset VAR.
++as_fn_unset ()
++{
++ { eval $1=; unset $1;}
++}
++as_unset=as_fn_unset
++
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
++
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++
++# as_fn_mkdir_p
++# -------------
++# Create "$as_dir" as a directory, including parents if necessary.
++as_fn_mkdir_p ()
++{
+
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
++ esac
++ test -d "$as_dir" || eval $as_mkdir_p || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+-(eval "as_func_return () {
+- (exit \$1)
+-}
+-as_func_success () {
+- as_func_return 0
+-}
+-as_func_failure () {
+- as_func_return 1
+-}
+-as_func_ret_success () {
+- return 0
+-}
+-as_func_ret_failure () {
+- return 1
+-}
++} # as_fn_mkdir_p
++# as_fn_append VAR VALUE
++# ----------------------
++# Append the text in VALUE to the end of the definition contained in VAR. Take
++# advantage of any shell optimizations that allow amortized linear growth over
++# repeated appends, instead of the typical quadratic growth present in naive
++# implementations.
++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
++ eval 'as_fn_append ()
++ {
++ eval $1+=\$2
++ }'
++else
++ as_fn_append ()
++ {
++ eval $1=\$$1\$2
++ }
++fi # as_fn_append
+
+-exitcode=0
+-if as_func_success; then
+- :
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
+ else
+- exitcode=1
+- echo as_func_success failed.
+-fi
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
+
+-if as_func_failure; then
+- exitcode=1
+- echo as_func_failure succeeded.
+-fi
+
+-if as_func_ret_success; then
+- :
++# as_fn_error ERROR [LINENO LOG_FD]
++# ---------------------------------
++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
++# script with status $?, using 1 if that was 0.
++as_fn_error ()
++{
++ as_status=$?; test $as_status -eq 0 && as_status=1
++ if test "$3"; then
++ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
++ fi
++ $as_echo "$as_me: error: $1" >&2
++ as_fn_exit $as_status
++} # as_fn_error
++
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
+ else
+- exitcode=1
+- echo as_func_ret_success failed.
++ as_expr=false
+ fi
+
+-if as_func_ret_failure; then
+- exitcode=1
+- echo as_func_ret_failure succeeded.
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
+ fi
+
+-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+- :
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
+ else
+- exitcode=1
+- echo positional parameters were not saved.
++ as_dirname=false
+ fi
+
+-test \$exitcode = 0") || {
+- echo No shell found that supports shell functions.
+- echo Please tell bug-autoconf at gnu.org about your system,
+- echo including any error possibly output before this message.
+- echo This can help us improve future autoconf versions.
+- echo Configuration will now proceed without shell functions.
+-}
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
+
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+- as_lineno_1=$LINENO
+- as_lineno_2=$LINENO
+- test "x$as_lineno_1" != "x$as_lineno_2" &&
+- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+-
+- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+- # uniformly replaced by the line number. The first 'sed' inserts a
+- # line-number line after each line using $LINENO; the second 'sed'
+- # does the real work. The second script uses 'N' to pair each
+- # line-number line with the line containing $LINENO, and appends
+- # trailing '-' during substitution so that $LINENO is not a special
+- # case at line end.
+- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+- # scripts with optimization help from Paolo Bonzini. Blame Lee
+- # E. McMahon (1931-1989) for sed's syntax. :-)
++ as_lineno_1=$LINENO as_lineno_1a=$LINENO
++ as_lineno_2=$LINENO as_lineno_2a=$LINENO
++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+@@ -473,8 +443,7 @@
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+- { (exit 1); exit 1; }; }
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+@@ -484,29 +453,18 @@
+ exit
+ }
+
+-
+-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+- as_dirname=dirname
+-else
+- as_dirname=false
+-fi
+-
+ ECHO_C= ECHO_N= ECHO_T=
+-case `echo -n x` in
++case `echo -n x` in #(((((
+ -n*)
+- case `echo 'x\c'` in
++ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+- *) ECHO_C='\c';;
++ xy) ECHO_C='\c';;
++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
++ ECHO_T=' ';;
+ esac;;
+ *)
+ ECHO_N='-n';;
+ esac
+-if expr a : '\(a\)' >/dev/null 2>&1 &&
+- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+- as_expr=expr
+-else
+- as_expr=false
+-fi
+
+ rm -f conf$$ conf$$.exe conf$$.file
+ if test -d conf$$.dir; then
+@@ -536,7 +494,7 @@
+ rmdir conf$$.dir 2>/dev/null
+
+ if mkdir -p . 2>/dev/null; then
+- as_mkdir_p=:
++ as_mkdir_p='mkdir -p "$as_dir"'
+ else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+@@ -555,10 +513,10 @@
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+- case $1 in
++ case $1 in #(
+ -*)set "./$1";;
+ esac;
+- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+@@ -573,7 +531,6 @@
+
+
+
+-
+ # Check that we are running under the correct shell.
+ SHELL=${CONFIG_SHELL-/bin/sh}
+
+@@ -722,7 +679,8 @@
+
+
+
+-exec 7<&0 </dev/null 6>&1
++test -n "$DJDIR" || exec 7<&0 </dev/null
++exec 6>&1
+
+ # Name of the host.
+ # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+@@ -740,7 +698,6 @@
+ subdirs=
+ MFLAGS=
+ MAKEFLAGS=
+-SHELL=${CONFIG_SHELL-/bin/sh}
+
+ # Identity of this package.
+ PACKAGE_NAME='libart-lgpl'
+@@ -748,6 +705,7 @@
+ PACKAGE_VERSION='2.3.21'
+ PACKAGE_STRING='libart-lgpl 2.3.21'
+ PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=libart'
++PACKAGE_URL=''
+
+ # Factoring default headers for most tests.
+ ac_includes_default="\
+@@ -908,6 +866,7 @@
+ program_transform_name
+ prefix
+ exec_prefix
++PACKAGE_URL
+ PACKAGE_BUGREPORT
+ PACKAGE_STRING
+ PACKAGE_VERSION
+@@ -1045,8 +1004,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1072,8 +1030,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1277,8 +1234,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1294,8 +1250,7 @@
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+@@ -1325,17 +1280,17 @@
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
+-Try \`$0 --help' for more information." >&2
+- { (exit 1); exit 1; }; }
++ -*) as_fn_error "unrecognized option: \`$ac_option'
++Try \`$0 --help' for more information."
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+- { (exit 1); exit 1; }; }
++ case $ac_envvar in #(
++ '' | [0-9]* | *[!_$as_cr_alnum]* )
++ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
++ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+@@ -1352,15 +1307,13 @@
+
+ if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "missing argument to $ac_option"
+ fi
+
+ if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+- fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+- { (exit 1); exit 1; }; } ;;
++ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+ fi
+@@ -1383,8 +1336,7 @@
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+ done
+
+ # There might be people who depend on the old broken behavior: `$host'
+@@ -1414,11 +1366,9 @@
+ ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ ac_ls_di=`ls -di .` &&
+ ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+- { $as_echo "$as_me: error: working directory cannot be determined" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "working directory cannot be determined"
+ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "pwd does not report name of working directory"
+
+
+ # Find the source files, if location was not specified.
+@@ -1457,13 +1407,11 @@
+ fi
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+- { (exit 1); exit 1; }; }
++ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+ fi
+ ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ ac_abs_confdir=`(
+- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
+- { (exit 1); exit 1; }; }
++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ pwd)`
+ # When building in place, set srcdir=.
+ if test "$ac_abs_confdir" = "$ac_pwd"; then
+@@ -1591,7 +1539,7 @@
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+@@ -1662,455 +1610,868 @@
+ if $ac_init_version; then
+ cat <<\_ACEOF
+ libart-lgpl configure 2.3.21
+-generated by GNU Autoconf 2.63
++generated by GNU Autoconf 2.65
+
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++Copyright (C) 2009 Free Software Foundation, Inc.
+ This configure script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it.
+ _ACEOF
+ exit
+ fi
+-cat >config.log <<_ACEOF
+-This file contains any messages produced by compilers while
+-running configure, to aid debugging if configure makes a mistake.
+
+-It was created by libart-lgpl $as_me 2.3.21, which was
+-generated by GNU Autoconf 2.63. Invocation command line was
++## ------------------------ ##
++## Autoconf initialization. ##
++## ------------------------ ##
++
++# ac_fn_c_try_compile LINENO
++# --------------------------
++# Try to compile conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_compile ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ rm -f conftest.$ac_objext
++ if { { ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compile") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
+- $ $0 $@
++ ac_retval=1
++fi
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++ as_fn_set_status $ac_retval
+
+-_ACEOF
+-exec 5>>config.log
++} # ac_fn_c_try_compile
++
++# ac_fn_c_try_cpp LINENO
++# ----------------------
++# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_cpp ()
+ {
+-cat <<_ASUNAME
+-## --------- ##
+-## Platform. ##
+-## --------- ##
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if { { ac_try="$ac_cpp conftest.$ac_ext"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } >/dev/null && {
++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
+-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+-uname -m = `(uname -m) 2>/dev/null || echo unknown`
+-uname -r = `(uname -r) 2>/dev/null || echo unknown`
+-uname -s = `(uname -s) 2>/dev/null || echo unknown`
+-uname -v = `(uname -v) 2>/dev/null || echo unknown`
++ ac_retval=1
++fi
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++ as_fn_set_status $ac_retval
+
+-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++} # ac_fn_c_try_cpp
+
+-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++# ac_fn_c_try_link LINENO
++# -----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_link ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ rm -f conftest.$ac_objext conftest$ac_exeext
++ if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
+-_ASUNAME
++ ac_retval=1
++fi
++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
++ # interfere with the next link command; also delete a directory that is
++ # left behind by Apple's compiler. We do this before executing the actions.
++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++ as_fn_set_status $ac_retval
+
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+- IFS=$as_save_IFS
+- test -z "$as_dir" && as_dir=.
+- $as_echo "PATH: $as_dir"
+-done
+-IFS=$as_save_IFS
++} # ac_fn_c_try_link
+
+-} >&5
++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
++# -------------------------------------------------------
++# Tests whether HEADER exists and can be compiled using the include files in
++# INCLUDES, setting the cache variable VAR accordingly.
++ac_fn_c_check_header_compile ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++#include <$2>
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ eval "$3=yes"
++else
++ eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+-cat >&5 <<_ACEOF
++} # ac_fn_c_check_header_compile
+
++# ac_fn_c_try_run LINENO
++# ----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
++# that executables *can* be run.
++ac_fn_c_try_run ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
++ { { case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_try") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: program exited with status $ac_status" >&5
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
+-## ----------- ##
+-## Core tests. ##
+-## ----------- ##
++ ac_retval=$ac_status
++fi
++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++ as_fn_set_status $ac_retval
+
+-_ACEOF
++} # ac_fn_c_try_run
+
++# ac_fn_c_check_func LINENO FUNC VAR
++# ----------------------------------
++# Tests whether FUNC exists, setting the cache variable VAR accordingly
++ac_fn_c_check_func ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define $2 innocuous_$2
+
+-# Keep a trace of the command line.
+-# Strip out --no-create and --no-recursion so they do not pile up.
+-# Strip out --silent because we don't want to record it for future runs.
+-# Also quote any args containing shell meta-characters.
+-# Make two passes to allow for proper duplicate-argument suppression.
+-ac_configure_args=
+-ac_configure_args0=
+-ac_configure_args1=
+-ac_must_keep_next=false
+-for ac_pass in 1 2
+-do
+- for ac_arg
+- do
+- case $ac_arg in
+- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+- | -silent | --silent | --silen | --sile | --sil)
+- continue ;;
+- *\'*)
+- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+- esac
+- case $ac_pass in
+- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+- 2)
+- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+- if test $ac_must_keep_next = true; then
+- ac_must_keep_next=false # Got value, back to normal.
+- else
+- case $ac_arg in
+- *=* | --config-cache | -C | -disable-* | --disable-* \
+- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+- | -with-* | --with-* | -without-* | --without-* | --x)
+- case "$ac_configure_args0 " in
+- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+- esac
+- ;;
+- -* ) ac_must_keep_next=true ;;
+- esac
+- fi
+- ac_configure_args="$ac_configure_args '$ac_arg'"
+- ;;
+- esac
+- done
+-done
+-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
++/* System header to define __stub macros and hopefully few prototypes,
++ which can conflict with char $2 (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
+
+-# When interrupted or exit'd, cleanup temporary files, and complete
+-# config.log. We remove comments because anyway the quotes in there
+-# would cause problems or look ugly.
+-# WARNING: Use '\'' to represent an apostrophe within the trap.
+-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+-trap 'exit_status=$?
+- # Save into config.log some information that might help in debugging.
+- {
+- echo
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
+
+- cat <<\_ASBOX
+-## ---------------- ##
+-## Cache variables. ##
+-## ---------------- ##
+-_ASBOX
+- echo
+- # The following way of writing the cache mishandles newlines in values,
+-(
+- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+- eval ac_val=\$$ac_var
+- case $ac_val in #(
+- *${as_nl}*)
+- case $ac_var in #(
+- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+- esac
+- case $ac_var in #(
+- _ | IFS | as_nl) ;; #(
+- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+- *) $as_unset $ac_var ;;
+- esac ;;
+- esac
+- done
+- (set) 2>&1 |
+- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+- *${as_nl}ac_space=\ *)
+- sed -n \
+- "s/'\''/'\''\\\\'\'''\''/g;
+- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+- ;; #(
+- *)
+- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+- ;;
+- esac |
+- sort
+-)
+- echo
++#undef $2
+
+- cat <<\_ASBOX
+-## ----------------- ##
+-## Output variables. ##
+-## ----------------- ##
+-_ASBOX
+- echo
+- for ac_var in $ac_subst_vars
+- do
+- eval ac_val=\$$ac_var
+- case $ac_val in
+- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+- esac
+- $as_echo "$ac_var='\''$ac_val'\''"
+- done | sort
+- echo
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char $2 ();
++/* The GNU C library defines this for functions which it implements
++ to always fail with ENOSYS. Some functions are actually named
++ something starting with __ and the normal name is an alias. */
++#if defined __stub_$2 || defined __stub___$2
++choke me
++#endif
+
+- if test -n "$ac_subst_files"; then
+- cat <<\_ASBOX
+-## ------------------- ##
+-## File substitutions. ##
+-## ------------------- ##
+-_ASBOX
+- echo
+- for ac_var in $ac_subst_files
+- do
+- eval ac_val=\$$ac_var
+- case $ac_val in
+- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+- esac
+- $as_echo "$ac_var='\''$ac_val'\''"
+- done | sort
+- echo
+- fi
+-
+- if test -s confdefs.h; then
+- cat <<\_ASBOX
+-## ----------- ##
+-## confdefs.h. ##
+-## ----------- ##
+-_ASBOX
+- echo
+- cat confdefs.h
+- echo
+- fi
+- test "$ac_signal" != 0 &&
+- $as_echo "$as_me: caught signal $ac_signal"
+- $as_echo "$as_me: exit $exit_status"
+- } >&5
+- rm -f core *.core core.conftest.* &&
+- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+- exit $exit_status
+-' 0
+-for ac_signal in 1 2 13 15; do
+- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+-done
+-ac_signal=0
++int
++main ()
++{
++return $2 ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ eval "$3=yes"
++else
++ eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+-# confdefs.h avoids OS command line length limits that DEFS can exceed.
+-rm -f -r conftest* confdefs.h
++} # ac_fn_c_check_func
+
+-# Predefined preprocessor variables.
++# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
++# --------------------------------------------
++# Tries to find the compile-time value of EXPR in a program that includes
++# INCLUDES, setting VAR accordingly. Returns whether the value could be
++# computed
++ac_fn_c_compute_int ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if test "$cross_compiling" = yes; then
++ # Depending upon the size, compute the lo and hi bounds.
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) >= 0)];
++test_array [0] = 0
+
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_NAME "$PACKAGE_NAME"
++ ;
++ return 0;
++}
+ _ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_lo=0 ac_mid=0
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) <= $ac_mid)];
++test_array [0] = 0
+
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++ ;
++ return 0;
++}
+ _ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_hi=$ac_mid; break
++else
++ as_fn_arith $ac_mid + 1 && ac_lo=$as_val
++ if test $ac_lo -le $ac_mid; then
++ ac_lo= ac_hi=
++ break
++ fi
++ as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ done
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) < 0)];
++test_array [0] = 0
+
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_VERSION "$PACKAGE_VERSION"
++ ;
++ return 0;
++}
+ _ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_hi=-1 ac_mid=-1
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) >= $ac_mid)];
++test_array [0] = 0
+
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_STRING "$PACKAGE_STRING"
++ ;
++ return 0;
++}
+ _ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_lo=$ac_mid; break
++else
++ as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
++ if test $ac_mid -le $ac_hi; then
++ ac_lo= ac_hi=
++ break
++ fi
++ as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ done
++else
++ ac_lo= ac_hi=
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++# Binary search between lo and hi bounds.
++while test "x$ac_lo" != "x$ac_hi"; do
++ as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) <= $ac_mid)];
++test_array [0] = 0
+
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++ ;
++ return 0;
++}
+ _ACEOF
+-
+-
+-# Let the site file select an alternate cache file if it wants to.
+-# Prefer an explicitly selected file to automatically selected ones.
+-ac_site_file1=NONE
+-ac_site_file2=NONE
+-if test -n "$CONFIG_SITE"; then
+- ac_site_file1=$CONFIG_SITE
+-elif test "x$prefix" != xNONE; then
+- ac_site_file1=$prefix/share/config.site
+- ac_site_file2=$prefix/etc/config.site
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_hi=$ac_mid
+ else
+- ac_site_file1=$ac_default_prefix/share/config.site
+- ac_site_file2=$ac_default_prefix/etc/config.site
++ as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+ fi
+-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+-do
+- test "x$ac_site_file" = xNONE && continue
+- if test -r "$ac_site_file"; then
+- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+- sed 's/^/| /' "$ac_site_file" >&5
+- . "$ac_site_file"
+- fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
++case $ac_lo in #((
++?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
++'') ac_retval=1 ;;
++esac
++ else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++static long int longval () { return $2; }
++static unsigned long int ulongval () { return $2; }
++#include <stdio.h>
++#include <stdlib.h>
++int
++main ()
++{
+
+-if test -r "$cache_file"; then
+- # Some versions of bash will fail to source /dev/null (special
+- # files actually), so we avoid doing that.
+- if test -f "$cache_file"; then
+- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+-$as_echo "$as_me: loading cache $cache_file" >&6;}
+- case $cache_file in
+- [\\/]* | ?:[\\/]* ) . "$cache_file";;
+- *) . "./$cache_file";;
+- esac
+- fi
++ FILE *f = fopen ("conftest.val", "w");
++ if (! f)
++ return 1;
++ if (($2) < 0)
++ {
++ long int i = longval ();
++ if (i != ($2))
++ return 1;
++ fprintf (f, "%ld", i);
++ }
++ else
++ {
++ unsigned long int i = ulongval ();
++ if (i != ($2))
++ return 1;
++ fprintf (f, "%lu", i);
++ }
++ /* Do not output a trailing newline, as this causes \r\n confusion
++ on some platforms. */
++ return ferror (f) || fclose (f) != 0;
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++ echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+ else
+- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+-$as_echo "$as_me: creating cache $cache_file" >&6;}
+- >$cache_file
++ ac_retval=1
+ fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++rm -f conftest.val
+
+-# Check that the precious variables saved in the cache have kept the same
+-# value.
+-ac_cache_corrupted=false
+-for ac_var in $ac_precious_vars; do
+- eval ac_old_set=\$ac_cv_env_${ac_var}_set
+- eval ac_new_set=\$ac_env_${ac_var}_set
+- eval ac_old_val=\$ac_cv_env_${ac_var}_value
+- eval ac_new_val=\$ac_env_${ac_var}_value
+- case $ac_old_set,$ac_new_set in
+- set,)
+- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+- ac_cache_corrupted=: ;;
+- ,set)
+- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+- ac_cache_corrupted=: ;;
+- ,);;
+- *)
+- if test "x$ac_old_val" != "x$ac_new_val"; then
+- # differences in whitespace do not lead to failure.
+- ac_old_val_w=`echo x $ac_old_val`
+- ac_new_val_w=`echo x $ac_new_val`
+- if test "$ac_old_val_w" != "$ac_new_val_w"; then
+- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+- ac_cache_corrupted=:
+- else
+- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+- eval $ac_var=\$ac_old_val
+- fi
+- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+- fi;;
+- esac
+- # Pass precious variables to config.status.
+- if test "$ac_new_set" = set; then
+- case $ac_new_val in
+- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+- *) ac_arg=$ac_var=$ac_new_val ;;
+- esac
+- case " $ac_configure_args " in
+- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+- esac
+ fi
+-done
+-if $ac_cache_corrupted; then
+- { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+- { (exit 1); exit 1; }; }
+-fi
+-
+-
+-
+-
+-
+-
+-
++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++ as_fn_set_status $ac_retval
+
++} # ac_fn_c_compute_int
++cat >config.log <<_ACEOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
+
++It was created by libart-lgpl $as_me 2.3.21, which was
++generated by GNU Autoconf 2.65. Invocation command line was
+
++ $ $0 $@
+
++_ACEOF
++exec 5>>config.log
++{
++cat <<_ASUNAME
++## --------- ##
++## Platform. ##
++## --------- ##
+
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
++_ASUNAME
+
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ $as_echo "PATH: $as_dir"
++ done
++IFS=$as_save_IFS
+
++} >&5
+
++cat >&5 <<_ACEOF
+
+
++## ----------- ##
++## Core tests. ##
++## ----------- ##
+
++_ACEOF
+
+
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
++# Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
++ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
++ac_must_keep_next=false
++for ac_pass in 1 2
++do
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *\'*)
++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
++ 2)
++ as_fn_append ac_configure_args1 " '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ as_fn_append ac_configure_args " '$ac_arg'"
++ ;;
++ esac
++ done
++done
++{ ac_configure_args0=; unset ac_configure_args0;}
++{ ac_configure_args1=; unset ac_configure_args1;}
+
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++# WARNING: Use '\'' to represent an apostrophe within the trap.
++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ {
++ echo
+
+-ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
++ cat <<\_ASBOX
++## ---------------- ##
++## Cache variables. ##
++## ---------------- ##
++_ASBOX
++ echo
++ # The following way of writing the cache mishandles newlines in values,
++(
++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) { eval $ac_var=; unset $ac_var;} ;;
++ esac ;;
++ esac
++ done
++ (set) 2>&1 |
++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ sed -n \
++ "s/'\''/'\''\\\\'\'''\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
++ ;; #(
++ *)
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++)
++ echo
+
++ cat <<\_ASBOX
++## ----------------- ##
++## Output variables. ##
++## ----------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
+
++ if test -n "$ac_subst_files"; then
++ cat <<\_ASBOX
++## ------------------- ##
++## File substitutions. ##
++## ------------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++ fi
+
+-ac_config_headers="$ac_config_headers config.h"
++ if test -s confdefs.h; then
++ cat <<\_ASBOX
++## ----------- ##
++## confdefs.h. ##
++## ----------- ##
++_ASBOX
++ echo
++ cat confdefs.h
++ echo
++ fi
++ test "$ac_signal" != 0 &&
++ $as_echo "$as_me: caught signal $ac_signal"
++ $as_echo "$as_me: exit $exit_status"
++ } >&5
++ rm -f core *.core core.conftest.* &&
++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
++ exit $exit_status
++' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
++done
++ac_signal=0
+
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -f -r conftest* confdefs.h
+
+-LIBART_MAJOR_VERSION=2
+-LIBART_MINOR_VERSION=3
+-LIBART_MICRO_VERSION=21
+-LIBART_VERSION=2.3.21
++$as_echo "/* confdefs.h */" > confdefs.h
+
+-LIBART_VERSION_INFO=`expr $LIBART_MAJOR_VERSION + $LIBART_MINOR_VERSION`:$LIBART_MICRO_VERSION:$LIBART_MINOR_VERSION
++# Predefined preprocessor variables.
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_NAME "$PACKAGE_NAME"
++_ACEOF
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++_ACEOF
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_VERSION "$PACKAGE_VERSION"
++_ACEOF
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_STRING "$PACKAGE_STRING"
++_ACEOF
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++_ACEOF
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_URL "$PACKAGE_URL"
++_ACEOF
+
+-am__api_version='1.11'
+
+-ac_aux_dir=
+-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+- if test -f "$ac_dir/install-sh"; then
+- ac_aux_dir=$ac_dir
+- ac_install_sh="$ac_aux_dir/install-sh -c"
+- break
+- elif test -f "$ac_dir/install.sh"; then
+- ac_aux_dir=$ac_dir
+- ac_install_sh="$ac_aux_dir/install.sh -c"
+- break
+- elif test -f "$ac_dir/shtool"; then
+- ac_aux_dir=$ac_dir
+- ac_install_sh="$ac_aux_dir/shtool install -c"
+- break
++# Let the site file select an alternate cache file if it wants to.
++# Prefer an explicitly selected file to automatically selected ones.
++ac_site_file1=NONE
++ac_site_file2=NONE
++if test -n "$CONFIG_SITE"; then
++ ac_site_file1=$CONFIG_SITE
++elif test "x$prefix" != xNONE; then
++ ac_site_file1=$prefix/share/config.site
++ ac_site_file2=$prefix/etc/config.site
++else
++ ac_site_file1=$ac_default_prefix/share/config.site
++ ac_site_file2=$ac_default_prefix/etc/config.site
++fi
++for ac_site_file in "$ac_site_file1" "$ac_site_file2"
++do
++ test "x$ac_site_file" = xNONE && continue
++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
++$as_echo "$as_me: loading site script $ac_site_file" >&6;}
++ sed 's/^/| /' "$ac_site_file" >&5
++ . "$ac_site_file"
+ fi
+ done
+-if test -z "$ac_aux_dir"; then
+- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+- { (exit 1); exit 1; }; }
+-fi
+-
+-# These three variables are undocumented and unsupported,
+-# and are intended to be withdrawn in a future Autoconf release.
+-# They can cause serious problems if a builder's source tree is in a directory
+-# whose full name contains unusual characters.
+-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
++if test -r "$cache_file"; then
++ # Some versions of bash will fail to source /dev/null (special files
++ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
++$as_echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
++ *) . "./$cache_file";;
++ esac
++ fi
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
++$as_echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
++fi
+
+-# Find a good install program. We prefer a C program (faster),
+-# so one script is as good as another. But avoid the broken or
+-# incompatible versions:
+-# SysV /etc/install, /usr/sbin/install
+-# SunOS /usr/etc/install
+-# IRIX /sbin/install
+-# AIX /bin/install
+-# AmigaOS /C/install, which installs bootblocks on floppy discs
+-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in $ac_precious_vars; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
++ eval ac_new_val=\$ac_env_${ac_var}_value
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ # differences in whitespace do not lead to failure.
++ ac_old_val_w=`echo x $ac_old_val`
++ ac_new_val_w=`echo x $ac_new_val`
++ if test "$ac_old_val_w" != "$ac_new_val_w"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ ac_cache_corrupted=:
++ else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
++ eval $ac_var=\$ac_old_val
++ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
++ fi;;
++ esac
++ # Pass precious variables to config.status.
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *) ac_arg=$ac_var=$ac_new_val ;;
++ esac
++ case " $ac_configure_args " in
++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
++ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
++ esac
++ fi
++done
++if $ac_cache_corrupted; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
++fi
++## -------------------- ##
++## Main body of script. ##
++## -------------------- ##
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++
++ac_config_headers="$ac_config_headers config.h"
++
++
++LIBART_MAJOR_VERSION=2
++LIBART_MINOR_VERSION=3
++LIBART_MICRO_VERSION=21
++LIBART_VERSION=2.3.21
++
++LIBART_VERSION_INFO=`expr $LIBART_MAJOR_VERSION + $LIBART_MINOR_VERSION`:$LIBART_MICRO_VERSION:$LIBART_MINOR_VERSION
++
++
++
++
++
++
++
++am__api_version='1.11'
++
++ac_aux_dir=
++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
++ for ac_t in install-sh install.sh shtool; do
++ if test -f "$ac_dir/$ac_t"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/$ac_t -c"
++ break 2
++ fi
++ done
++done
++if test -z "$ac_aux_dir"; then
++ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
++fi
++
++# These three variables are undocumented and unsupported,
++# and are intended to be withdrawn in a future Autoconf release.
++# They can cause serious problems if a builder's source tree is in a directory
++# whose full name contains unusual characters.
++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
++
++
++# Find a good install program. We prefer a C program (faster),
++# so one script is as good as another. But avoid the broken or
++# incompatible versions:
++# SysV /etc/install, /usr/sbin/install
++# SunOS /usr/etc/install
++# IRIX /sbin/install
++# AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # OS/2's system install, which has a completely different semantic
+ # ./install, which can be erroneously created by make from ./install.sh.
+ # Reject install programs that cannot install multiple files.
+-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+ $as_echo_n "checking for a BSD-compatible install... " >&6; }
+ if test -z "$INSTALL"; then
+-if test "${ac_cv_path_install+set}" = set; then
++if test "${ac_cv_path_install+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+@@ -2118,11 +2479,11 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- # Account for people who put trailing slashes in PATH elements.
+-case $as_dir/ in
+- ./ | .// | /cC/* | \
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in #((
++ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+@@ -2159,7 +2520,7 @@
+ ;;
+ esac
+
+-done
++ done
+ IFS=$as_save_IFS
+
+ rm -rf conftest.one conftest.two conftest.dir
+@@ -2175,7 +2536,7 @@
+ INSTALL=$ac_install_sh
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+ $as_echo "$INSTALL" >&6; }
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+@@ -2186,7 +2547,7 @@
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+ $as_echo_n "checking whether build environment is sane... " >&6; }
+ # Just in case
+ sleep 1
+@@ -2197,15 +2558,11 @@
+ '
+ case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+- { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+-$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+- { (exit 1); exit 1; }; };;
++ as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+ esac
+ case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+- { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+-$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+- { (exit 1); exit 1; }; };;
++ as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+ esac
+
+ # Do `set' in a subshell so we don't clobber the current shell's
+@@ -2227,11 +2584,8 @@
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+-alias in your environment" >&5
+-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+-alias in your environment" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "ls -t appears to fail. Make sure there is not a broken
++alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+@@ -2240,13 +2594,10 @@
+ # Ok.
+ :
+ else
+- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+-Check your system clock" >&5
+-$as_echo "$as_me: error: newly created file is older than distributed files!
+-Check your system clock" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "newly created file is older than distributed files!
++Check your system clock" "$LINENO" 5
+ fi
+-{ $as_echo "$as_me:$LINENO: result: yes" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ $as_echo "yes" >&6; }
+ test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+@@ -2274,7 +2625,7 @@
+ am_missing_run="$MISSING --run "
+ else
+ am_missing_run=
+- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+ $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ fi
+
+@@ -2295,9 +2646,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_STRIP+set}" = set; then
++if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$STRIP"; then
+@@ -2308,24 +2659,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ STRIP=$ac_cv_prog_STRIP
+ if test -n "$STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+ $as_echo "$STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2335,9 +2686,9 @@
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+ set dummy strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_STRIP"; then
+@@ -2348,24 +2699,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+ if test -n "$ac_ct_STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+ $as_echo "$ac_ct_STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2374,7 +2725,7 @@
else
- continue
-@@ -6936,13 +6954,13 @@
- # Do all the work for Automake. -*- Autoconf -*-
-
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
--# 2005, 2006 Free Software Foundation, Inc.
-+# 2005, 2006, 2008 Free Software Foundation, Inc.
- #
- # This file is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-
--# serial 12
-+# serial 13
-
- # This macro actually does too much. Some checks are only needed if
- # your package does certain things. But this isn't really a big deal.
-@@ -7047,16 +7065,17 @@
- # our stamp files there.
- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
- [# Compute $1's index in $config_headers.
-+_am_arg=$1
- _am_stamp_count=1
- for _am_header in $config_headers :; do
- case $_am_header in
-- $1 | $1:* )
-+ $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -2387,10 +2738,10 @@
+ fi
+ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+ $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+ if test -z "$MKDIR_P"; then
+- if test "${ac_cv_path_mkdir+set}" = set; then
++ if test "${ac_cv_path_mkdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+@@ -2398,7 +2749,7 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_prog in mkdir gmkdir; do
++ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+@@ -2410,11 +2761,12 @@
+ esac
+ done
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+
++ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+@@ -2422,11 +2774,10 @@
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+- test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+ $as_echo "$MKDIR_P" >&6; }
+
+ mkdir_p="$MKDIR_P"
+@@ -2439,9 +2790,9 @@
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_AWK+set}" = set; then
++if test "${ac_cv_prog_AWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$AWK"; then
+@@ -2452,24 +2803,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ AWK=$ac_cv_prog_AWK
+ if test -n "$AWK"; then
+- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+ $as_echo "$AWK" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2477,11 +2828,11 @@
+ test -n "$AWK" && break
+ done
+
+-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+ $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+ set x ${MAKE-make}
+ ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+ else
+ cat >conftest.make <<\_ACEOF
+@@ -2499,11 +2850,11 @@
+ rm -f conftest.make
+ fi
+ if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ $as_echo "yes" >&6; }
+ SET_MAKE=
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+@@ -2523,9 +2874,7 @@
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+ fi
+
+@@ -2583,7 +2932,7 @@
+
+
+ # Check whether --enable-ansi was given.
+-if test "${enable_ansi+set}" = set; then
++if test "${enable_ansi+set}" = set; then :
+ enableval=$enable_ansi;
+ else
+ enable_ansi=no
+@@ -2598,9 +2947,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}gcc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_CC+set}" = set; then
++if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+@@ -2611,24 +2960,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+ $as_echo "$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2638,9 +2987,9 @@
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+ set dummy gcc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_CC"; then
+@@ -2651,24 +3000,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+ $as_echo "$ac_ct_CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2677,7 +3026,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -2691,9 +3040,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}cc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_CC+set}" = set; then
++if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+@@ -2704,24 +3053,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+ $as_echo "$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2731,9 +3080,9 @@
+ if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_CC+set}" = set; then
++if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+@@ -2745,18 +3094,18 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ if test $ac_prog_rejected = yes; then
+@@ -2775,10 +3124,10 @@
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+ $as_echo "$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2790,9 +3139,9 @@
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_CC+set}" = set; then
++if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+@@ -2803,24 +3152,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- { $as_echo "$as_me:$LINENO: result: $CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+ $as_echo "$CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2834,9 +3183,9 @@
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_CC"; then
+@@ -2847,24 +3196,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+ $as_echo "$ac_ct_CC" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -2877,7 +3226,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -2888,57 +3237,37 @@
+ fi
+
+
+-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
+-See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }; }
++as_fn_error "no acceptable C compiler found in \$PATH
++See \`config.log' for more details." "$LINENO" 5; }
+
+ # Provide some information about the compiler.
+-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+ set X $ac_compile
+ ac_compiler=$2
+-{ (ac_try="$ac_compiler --version >&5"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compiler --version >&5") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }
+-{ (ac_try="$ac_compiler -v >&5"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compiler -v >&5") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }
+-{ (ac_try="$ac_compiler -V >&5"
++for ac_option in --version -v -V -qversion; do
++ { { ac_try="$ac_compiler $ac_option >&5"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compiler -V >&5") 2>&5
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }
++ if test -s conftest.err; then
++ sed '10a\
++... rest of stderr output deleted ...
++ 10q' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ fi
++ rm -f conftest.er1 conftest.err
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++done
+
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -2954,8 +3283,8 @@
+ # Try to create an executable without -o first, disregard a.out.
+ # It will help us diagnose broken compilers, and finding out an intuition
+ # of exeext.
+-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+-$as_echo_n "checking for C compiler default output file name... " >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
++$as_echo_n "checking whether the C compiler works... " >&6; }
+ ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+ # The possible output files:
+@@ -2971,17 +3300,17 @@
+ done
+ rm -f $ac_rmfiles
+
+-if { (ac_try="$ac_link_default"
++if { { ac_try="$ac_link_default"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+ # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+ # in a Makefile. We should not override ac_cv_exeext if it was cached,
+@@ -2998,7 +3327,7 @@
+ # certainly right.
+ break;;
+ *.* )
+- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+@@ -3017,84 +3346,42 @@
+ else
+ ac_file=''
+ fi
+-
+-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+-$as_echo "$ac_file" >&6; }
+-if test -z "$ac_file"; then
+- $as_echo "$as_me: failed program was:" >&5
++if test -z "$ac_file"; then :
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++$as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: C compiler cannot create executables
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
++{ as_fn_set_status 77
++as_fn_error "C compiler cannot create executables
++See \`config.log' for more details." "$LINENO" 5; }; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
+ fi
+-
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
++$as_echo_n "checking for C compiler default output file name... " >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
++$as_echo "$ac_file" >&6; }
+ ac_exeext=$ac_cv_exeext
+
+-# Check that the compiler produces executables we can run. If not, either
+-# the compiler is broken, or we cross compile.
+-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+-$as_echo_n "checking whether the C compiler works... " >&6; }
+-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+-# If not cross compiling, check that we can run a simple program.
+-if test "$cross_compiling" != yes; then
+- if { ac_try='./$ac_file'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- cross_compiling=no
+- else
+- if test "$cross_compiling" = maybe; then
+- cross_compiling=yes
+- else
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
+-If you meant to cross compile, use \`--host'.
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot run C compiled programs.
+-If you meant to cross compile, use \`--host'.
+-See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }; }
+- fi
+- fi
+-fi
+-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
+-
+ rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ ac_clean_files=$ac_clean_files_save
+-# Check that the compiler produces executables we can run. If not, either
+-# the compiler is broken, or we cross compile.
+-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+-$as_echo_n "checking whether we are cross compiling... " >&6; }
+-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+-$as_echo "$cross_compiling" >&6; }
+-
+-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+ $as_echo_n "checking for suffix of executables... " >&6; }
+-if { (ac_try="$ac_link"
++if { { ac_try="$ac_link"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+ # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+ # work properly (i.e., refer to `conftest.exe'), while it won't with
+@@ -3109,32 +3396,83 @@
esac
done
--echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
- #
-@@ -7357,7 +7376,7 @@
-
- # _AM_SUBST_NOTMAKE(VARIABLE)
- # ---------------------------
--# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
-+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
- # This macro is traced by Automake.
- AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-diff -x'*config.sub' -x'*config.guess' -Naur libart-lgpl-2.3.20.old/configure libart-lgpl-2.3.20/configure
---- libart-lgpl-2.3.20.old/configure 2008-01-30 10:00:41.000000000 +0100
-+++ libart-lgpl-2.3.20/configure 2008-01-30 13:42:15.000000000 +0100
-@@ -4468,7 +4468,7 @@
+ else
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+-See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }; }
++as_fn_error "cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." "$LINENO" 5; }
+ fi
+-
+-rm -f conftest$ac_cv_exeext
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
++rm -f conftest conftest$ac_cv_exeext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+ $as_echo "$ac_cv_exeext" >&6; }
+
+ rm -f conftest.$ac_ext
+ EXEEXT=$ac_cv_exeext
+ ac_exeext=$EXEEXT
+-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdio.h>
++int
++main ()
++{
++FILE *f = fopen ("conftest.out", "w");
++ return ferror (f) || fclose (f) != 0;
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files="$ac_clean_files conftest.out"
++# Check that the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
++$as_echo_n "checking whether we are cross compiling... " >&6; }
++if test "$cross_compiling" != yes; then
++ { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if { ac_try='./conftest$ac_cv_exeext'
++ { { case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_try") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; }; then
++ cross_compiling=no
++ else
++ if test "$cross_compiling" = maybe; then
++ cross_compiling=yes
++ else
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error "cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." "$LINENO" 5; }
++ fi
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
++$as_echo "$cross_compiling" >&6; }
++
++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+ $as_echo_n "checking for suffix of object files... " >&6; }
+-if test "${ac_cv_objext+set}" = set; then
++if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -3146,17 +3484,17 @@
+ }
+ _ACEOF
+ rm -f conftest.o conftest.obj
+-if { (ac_try="$ac_compile"
++if { { ac_try="$ac_compile"
+ case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+@@ -3169,31 +3507,23 @@
+ $as_echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
+-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
+-See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }; }
++as_fn_error "cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." "$LINENO" 5; }
+ fi
+-
+ rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+ $as_echo "$ac_cv_objext" >&6; }
+ OBJEXT=$ac_cv_objext
+ ac_objext=$OBJEXT
+-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+ $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+-if test "${ac_cv_c_compiler_gnu+set}" = set; then
++if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -3207,37 +3537,16 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_compiler_gnu=no
++ ac_compiler_gnu=no
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+ $as_echo "$ac_cv_c_compiler_gnu" >&6; }
+ if test $ac_compiler_gnu = yes; then
+ GCC=yes
+@@ -3246,20 +3555,16 @@
+ fi
+ ac_test_CFLAGS=${CFLAGS+set}
+ ac_save_CFLAGS=$CFLAGS
+-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+ $as_echo_n "checking whether $CC accepts -g... " >&6; }
+-if test "${ac_cv_prog_cc_g+set}" = set; then
++if test "${ac_cv_prog_cc_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -3270,35 +3575,11 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- CFLAGS=""
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ CFLAGS=""
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -3309,36 +3590,12 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- :
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++if ac_fn_c_try_compile "$LINENO"; then :
+
+- ac_c_werror_flag=$ac_save_c_werror_flag
++else
++ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -3349,42 +3606,17 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+ $as_echo "$ac_cv_prog_cc_g" >&6; }
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+@@ -3401,18 +3633,14 @@
+ CFLAGS=
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+ $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+-if test "${ac_cv_prog_cc_c89+set}" = set; then
++if test "${ac_cv_prog_cc_c89+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ ac_cv_prog_cc_c89=no
+ ac_save_CC=$CC
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <stdarg.h>
+ #include <stdio.h>
+@@ -3469,32 +3697,9 @@
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+ do
+ CC="$ac_save_CC $ac_arg"
+- rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
++ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+ done
+@@ -3505,17 +3710,19 @@
+ # AC_CACHE_VAL
+ case "x$ac_cv_prog_cc_c89" in
+ x)
+- { $as_echo "$as_me:$LINENO: result: none needed" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+ $as_echo "none needed" >&6; } ;;
+ xno)
+- { $as_echo "$as_me:$LINENO: result: unsupported" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+ $as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+ $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+ esac
++if test "x$ac_cv_prog_cc_c89" != xno; then :
+
++fi
+
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+@@ -3534,7 +3741,7 @@
+ .PHONY: am__doit
+ END
+ # If we don't find an include directive, just comment out the code.
+-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+ $as_echo_n "checking for style of include used by $am_make... " >&6; }
+ am__include="#"
+ am__quote=
+@@ -3562,12 +3769,12 @@
+ fi
+
+
+-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+ $as_echo "$_am_result" >&6; }
+ rm -f confinc confmf
+
+ # Check whether --enable-dependency-tracking was given.
+-if test "${enable_dependency_tracking+set}" = set; then
++if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+ fi
+
+@@ -3587,9 +3794,9 @@
+
+ depcc="$CC" am_compiler_list=
+
+-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+ $as_echo_n "checking dependency style of $depcc... " >&6; }
+-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+@@ -3697,7 +3904,7 @@
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+ $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+ CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+@@ -3717,14 +3924,14 @@
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+ $as_echo_n "checking how to run the C preprocessor... " >&6; }
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+- if test "${ac_cv_prog_CPP+set}" = set; then
++ if test "${ac_cv_prog_CPP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ # Double quotes because CPP needs to be expanded
+@@ -3739,11 +3946,7 @@
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #ifdef __STDC__
+ # include <limits.h>
+@@ -3752,78 +3955,34 @@
+ #endif
+ Syntax error
+ _ACEOF
+-if { (ac_try="$ac_cpp conftest.$ac_ext"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } >/dev/null && {
+- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- }; then
+- :
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++if ac_fn_c_try_cpp "$LINENO"; then :
+
++else
+ # Broken: fails on valid input.
+ continue
+ fi
+-
+ rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <ac_nonexistent.h>
+ _ACEOF
+-if { (ac_try="$ac_cpp conftest.$ac_ext"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } >/dev/null && {
+- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- }; then
++if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+ continue
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+ # Passes both tests.
+ ac_preproc_ok=:
+ break
+ fi
+-
+ rm -f conftest.err conftest.$ac_ext
+
+ done
+ # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+ rm -f conftest.err conftest.$ac_ext
+-if $ac_preproc_ok; then
++if $ac_preproc_ok; then :
+ break
+ fi
+
+@@ -3835,7 +3994,7 @@
+ else
+ ac_cv_prog_CPP=$CPP
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+ $as_echo "$CPP" >&6; }
+ ac_preproc_ok=false
+ for ac_c_preproc_warn_flag in '' yes
+@@ -3846,11 +4005,7 @@
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #ifdef __STDC__
+ # include <limits.h>
+@@ -3859,87 +4014,40 @@
+ #endif
+ Syntax error
+ _ACEOF
+-if { (ac_try="$ac_cpp conftest.$ac_ext"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } >/dev/null && {
+- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- }; then
+- :
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++if ac_fn_c_try_cpp "$LINENO"; then :
+
++else
+ # Broken: fails on valid input.
+ continue
+ fi
+-
+ rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <ac_nonexistent.h>
+ _ACEOF
+-if { (ac_try="$ac_cpp conftest.$ac_ext"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } >/dev/null && {
+- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- }; then
++if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+ continue
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+ # Passes both tests.
+ ac_preproc_ok=:
+ break
+ fi
+-
+ rm -f conftest.err conftest.$ac_ext
+
+ done
+ # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+ rm -f conftest.err conftest.$ac_ext
+-if $ac_preproc_ok; then
+- :
++if $ac_preproc_ok; then :
++
+ else
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+-See \`config.log' for more details." >&2;}
+- { (exit 1); exit 1; }; }; }
++as_fn_error "C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." "$LINENO" 5; }
+ fi
+
+ ac_ext=c
+@@ -3950,35 +4058,27 @@
+
+ # Make sure we can run config.sub.
+ $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+ $as_echo_n "checking build system type... " >&6; }
+-if test "${ac_cv_build+set}" = set; then
++if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ ac_build_alias=$build_alias
+ test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+ test "x$ac_build_alias" = x &&
+- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+ $as_echo "$ac_cv_build" >&6; }
+ case $ac_cv_build in
+ *-*-*) ;;
+-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
+- { (exit 1); exit 1; }; };;
++*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+ esac
+ build=$ac_cv_build
+ ac_save_IFS=$IFS; IFS='-'
+@@ -3994,28 +4094,24 @@
+ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+ $as_echo_n "checking host system type... " >&6; }
+-if test "${ac_cv_host+set}" = set; then
++if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+ else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+ $as_echo "$ac_cv_host" >&6; }
+ case $ac_cv_host in
+ *-*-*) ;;
+-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
+- { (exit 1); exit 1; }; };;
++*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+ esac
+ host=$ac_cv_host
+ ac_save_IFS=$IFS; IFS='-'
+@@ -4038,9 +4134,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}as; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_AS+set}" = set; then
++if test "${ac_cv_prog_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$AS"; then
+@@ -4051,24 +4147,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ AS=$ac_cv_prog_AS
+ if test -n "$AS"; then
+- { $as_echo "$as_me:$LINENO: result: $AS" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+ $as_echo "$AS" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4078,9 +4174,9 @@
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+ set dummy as; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
++if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_AS"; then
+@@ -4091,24 +4187,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AS="as"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_AS=$ac_cv_prog_ac_ct_AS
+ if test -n "$ac_ct_AS"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+ $as_echo "$ac_ct_AS" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4117,7 +4213,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -4130,9 +4226,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$DLLTOOL"; then
+@@ -4143,24 +4239,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ DLLTOOL=$ac_cv_prog_DLLTOOL
+ if test -n "$DLLTOOL"; then
+- { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+ $as_echo "$DLLTOOL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4170,9 +4266,9 @@
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+ set dummy dlltool; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_DLLTOOL"; then
+@@ -4183,24 +4279,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+ if test -n "$ac_ct_DLLTOOL"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+ $as_echo "$ac_ct_DLLTOOL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4209,7 +4305,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -4222,9 +4318,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}objdump; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
++if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$OBJDUMP"; then
+@@ -4235,24 +4331,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ OBJDUMP=$ac_cv_prog_OBJDUMP
+ if test -n "$OBJDUMP"; then
+- { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+ $as_echo "$OBJDUMP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4262,9 +4358,9 @@
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+ set dummy objdump; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_OBJDUMP"; then
+@@ -4275,24 +4371,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+ if test -n "$ac_ct_OBJDUMP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+ $as_echo "$ac_ct_OBJDUMP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4301,7 +4397,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -4336,14 +4432,14 @@
+
+ case `pwd` in
+ *\ * | *\ *)
+- { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+ $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+ esac
+
+
+
+-macro_version='2.2.6'
+-macro_revision='1.3012'
++macro_version='2.2.6b'
++macro_revision='1.3017'
+
+
+
+@@ -4359,9 +4455,9 @@
+
+ ltmain="$ac_aux_dir/ltmain.sh"
+
+-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+ $as_echo_n "checking for a sed that does not truncate output... " >&6; }
+-if test "${ac_cv_path_SED+set}" = set; then
++if test "${ac_cv_path_SED+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+@@ -4369,7 +4465,7 @@
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+- $as_unset ac_script || ac_script=
++ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+@@ -4378,7 +4474,7 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_prog in sed gsed; do
++ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+@@ -4398,7 +4494,7 @@
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+- ac_count=`expr $ac_count + 1`
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+@@ -4413,19 +4509,17 @@
+ $ac_path_SED_found && break 3
+ done
+ done
+-done
++ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+- { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
+-$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_SED=$SED
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+ $as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+@@ -4443,9 +4537,9 @@
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+ $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+-if test "${ac_cv_path_GREP+set}" = set; then
++if test "${ac_cv_path_GREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -z "$GREP"; then
+@@ -4456,7 +4550,7 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_prog in grep ggrep; do
++ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+@@ -4476,7 +4570,7 @@
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+- ac_count=`expr $ac_count + 1`
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+@@ -4491,26 +4585,24 @@
+ $ac_path_GREP_found && break 3
+ done
+ done
+-done
++ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_GREP=$GREP
+ fi
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+ $as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+ $as_echo_n "checking for egrep... " >&6; }
+-if test "${ac_cv_path_EGREP+set}" = set; then
++if test "${ac_cv_path_EGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+@@ -4524,7 +4616,7 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_prog in egrep; do
++ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+@@ -4544,7 +4636,7 @@
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+- ac_count=`expr $ac_count + 1`
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+@@ -4559,12 +4651,10 @@
+ $ac_path_EGREP_found && break 3
+ done
+ done
+-done
++ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_EGREP=$EGREP
+@@ -4572,14 +4662,14 @@
+
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+ $as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+-{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+ $as_echo_n "checking for fgrep... " >&6; }
+-if test "${ac_cv_path_FGREP+set}" = set; then
++if test "${ac_cv_path_FGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+@@ -4593,7 +4683,7 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_prog in fgrep; do
++ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+@@ -4613,7 +4703,7 @@
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+- ac_count=`expr $ac_count + 1`
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+@@ -4628,12 +4718,10 @@
+ $ac_path_FGREP_found && break 3
+ done
+ done
+-done
++ done
+ IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+- { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+-$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+ else
+ ac_cv_path_FGREP=$FGREP
+@@ -4641,7 +4729,7 @@
+
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+ $as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+@@ -4667,7 +4755,7 @@
+
+
+ # Check whether --with-gnu-ld was given.
+-if test "${with_gnu_ld+set}" = set; then
++if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ else
+ with_gnu_ld=no
+@@ -4676,7 +4764,7 @@
+ ac_prog=ld
+ if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+ $as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+@@ -4706,13 +4794,13 @@
+ ;;
+ esac
+ elif test "$with_gnu_ld" = yes; then
+- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+ $as_echo_n "checking for GNU ld... " >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+ $as_echo_n "checking for non-GNU ld... " >&6; }
+ fi
+-if test "${lt_cv_path_LD+set}" = set; then
++if test "${lt_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -z "$LD"; then
+@@ -4743,18 +4831,16 @@
+
+ LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+- { $as_echo "$as_me:$LINENO: result: $LD" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+ $as_echo "$LD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+- { (exit 1); exit 1; }; }
+-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
++test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+ $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+-if test "${lt_cv_prog_gnu_ld+set}" = set; then
++if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+@@ -4767,7 +4853,7 @@
+ ;;
+ esac
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+ $as_echo "$lt_cv_prog_gnu_ld" >&6; }
+ with_gnu_ld=$lt_cv_prog_gnu_ld
+
+@@ -4779,9 +4865,9 @@
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+ $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+-if test "${lt_cv_path_NM+set}" = set; then
++if test "${lt_cv_path_NM+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$NM"; then
+@@ -4828,7 +4914,7 @@
+ : ${lt_cv_path_NM=no}
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+ $as_echo "$lt_cv_path_NM" >&6; }
+ if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+@@ -4839,9 +4925,9 @@
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_DUMPBIN+set}" = set; then
++if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$DUMPBIN"; then
+@@ -4852,24 +4938,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ DUMPBIN=$ac_cv_prog_DUMPBIN
+ if test -n "$DUMPBIN"; then
+- { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+ $as_echo "$DUMPBIN" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4883,9 +4969,9 @@
+ do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_DUMPBIN"; then
+@@ -4896,24 +4982,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+ if test -n "$ac_ct_DUMPBIN"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+ $as_echo "$ac_ct_DUMPBIN" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -4926,7 +5012,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -4946,44 +5032,44 @@
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+ $as_echo_n "checking the name lister ($NM) interface... " >&6; }
+-if test "${lt_cv_nm_interface+set}" = set; then
++if test "${lt_cv_nm_interface+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:4956: $ac_compile\"" >&5)
++ (eval echo "\"\$as_me:5042: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+- (eval echo "\"\$as_me:4959: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
++ (eval echo "\"\$as_me:5045: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+- (eval echo "\"\$as_me:4962: output\"" >&5)
++ (eval echo "\"\$as_me:5048: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+ $as_echo "$lt_cv_nm_interface" >&6; }
+
+-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+ $as_echo_n "checking whether ln -s works... " >&6; }
+ LN_S=$as_ln_s
+ if test "$LN_S" = "ln -s"; then
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ $as_echo "yes" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+ $as_echo "no, using $LN_S" >&6; }
+ fi
+
+ # find the maximum length of command line arguments
+-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+ $as_echo_n "checking the maximum length of command line arguments... " >&6; }
+-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
++if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ i=0
+@@ -5101,10 +5187,10 @@
+ fi
+
+ if test -n $lt_cv_sys_max_cmd_len ; then
+- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+ $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: none" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+ $as_echo "none" >&6; }
+ fi
+ max_cmd_len=$lt_cv_sys_max_cmd_len
+@@ -5118,7 +5204,7 @@
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+
+-{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+ # Try some XSI features
+ xsi_shell=no
+@@ -5128,17 +5214,17 @@
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+-{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+ $as_echo "$xsi_shell" >&6; }
+
+
+-{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+ $as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+ lt_shell_append=no
+ ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+-{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+ $as_echo "$lt_shell_append" >&6; }
+
+
+@@ -5173,14 +5259,14 @@
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+ $as_echo_n "checking for $LD option to reload object files... " >&6; }
+-if test "${lt_cv_ld_reload_flag+set}" = set; then
++if test "${lt_cv_ld_reload_flag+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_ld_reload_flag='-r'
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+ $as_echo "$lt_cv_ld_reload_flag" >&6; }
+ reload_flag=$lt_cv_ld_reload_flag
+ case $reload_flag in
+@@ -5209,9 +5295,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}objdump; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
++if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$OBJDUMP"; then
+@@ -5222,24 +5308,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ OBJDUMP=$ac_cv_prog_OBJDUMP
+ if test -n "$OBJDUMP"; then
+- { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+ $as_echo "$OBJDUMP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5249,9 +5335,9 @@
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+ set dummy objdump; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_OBJDUMP"; then
+@@ -5262,24 +5348,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+ if test -n "$ac_ct_OBJDUMP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+ $as_echo "$ac_ct_OBJDUMP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5288,7 +5374,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -5305,9 +5391,9 @@
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+ $as_echo_n "checking how to recognize dependent libraries... " >&6; }
+-if test "${lt_cv_deplibs_check_method+set}" = set; then
++if test "${lt_cv_deplibs_check_method+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+@@ -5422,11 +5508,11 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
-@@ -4654,7 +4654,6 @@
- esac
- ;;
+@@ -5501,7 +5587,7 @@
+ esac
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+ $as_echo "$lt_cv_deplibs_check_method" >&6; }
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+@@ -5521,9 +5607,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ar; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_AR+set}" = set; then
++if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$AR"; then
+@@ -5534,24 +5620,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ AR=$ac_cv_prog_AR
+ if test -n "$AR"; then
+- { $as_echo "$as_me:$LINENO: result: $AR" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+ $as_echo "$AR" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5561,9 +5647,9 @@
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+ set dummy ar; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_AR"; then
+@@ -5574,24 +5660,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_AR=$ac_cv_prog_ac_ct_AR
+ if test -n "$ac_ct_AR"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+ $as_echo "$ac_ct_AR" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5600,7 +5686,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -5626,9 +5712,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_STRIP+set}" = set; then
++if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$STRIP"; then
+@@ -5639,24 +5725,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ STRIP=$ac_cv_prog_STRIP
+ if test -n "$STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+ $as_echo "$STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5666,9 +5752,9 @@
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+ set dummy strip; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_STRIP"; then
+@@ -5679,24 +5765,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+ if test -n "$ac_ct_STRIP"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+ $as_echo "$ac_ct_STRIP" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5705,7 +5791,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -5725,9 +5811,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_RANLIB+set}" = set; then
++if test "${ac_cv_prog_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$RANLIB"; then
+@@ -5738,24 +5824,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+ $as_echo "$RANLIB" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5765,9 +5851,9 @@
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+ set dummy ranlib; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_RANLIB"; then
+@@ -5778,24 +5864,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+ if test -n "$ac_ct_RANLIB"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+ $as_echo "$ac_ct_RANLIB" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -5804,7 +5890,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -5882,9 +5968,9 @@
+
+
+ # Check for command to grab the raw symbol name followed by C symbol from nm.
+-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+ $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+
+@@ -6000,18 +6086,18 @@
+ int main(){nm_test_var='a';nm_test_func();return(0);}
+ _LT_EOF
+
+- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && test -s "$nlist"; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+@@ -6064,11 +6150,11 @@
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && test -s conftest${ac_exeext}; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+@@ -6102,10 +6188,10 @@
+ lt_cv_sys_global_symbol_to_cdecl=
+ fi
+ if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+- { $as_echo "$as_me:$LINENO: result: failed" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+ $as_echo "failed" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: ok" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+ $as_echo "ok" >&6; }
+ fi
+
+@@ -6132,7 +6218,7 @@
+
+
+ # Check whether --enable-libtool-lock was given.
+-if test "${enable_libtool_lock+set}" = set; then
++if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+ fi
+
+@@ -6144,11 +6230,11 @@
+ ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+@@ -6162,12 +6248,12 @@
+ ;;
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '#line 6165 "configure"' > conftest.$ac_ext
+- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ echo '#line 6251 "configure"' > conftest.$ac_ext
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+@@ -6201,11 +6287,11 @@
+ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+@@ -6254,9 +6340,9 @@
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+ $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+-if test "${lt_cv_cc_needs_belf+set}" = set; then
++if test "${lt_cv_cc_needs_belf+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ ac_ext=c
+@@ -6265,11 +6351,7 @@
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -6280,38 +6362,13 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- lt_cv_cc_needs_belf=no
++ lt_cv_cc_needs_belf=no
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+@@ -6319,7 +6376,7 @@
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+ $as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+@@ -6329,11 +6386,11 @@
+ sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
*64-bit*)
-- libsuff=64
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
-@@ -7392,11 +7391,11 @@
+ case $lt_cv_prog_gnu_ld in
+@@ -6359,9 +6416,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$DSYMUTIL"; then
+@@ -6372,24 +6429,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ DSYMUTIL=$ac_cv_prog_DSYMUTIL
+ if test -n "$DSYMUTIL"; then
+- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+ $as_echo "$DSYMUTIL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6399,9 +6456,9 @@
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+ set dummy dsymutil; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_DSYMUTIL"; then
+@@ -6412,24 +6469,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+ if test -n "$ac_ct_DSYMUTIL"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+ $as_echo "$ac_ct_DSYMUTIL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6438,7 +6495,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -6451,9 +6508,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_NMEDIT+set}" = set; then
++if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$NMEDIT"; then
+@@ -6464,24 +6521,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ NMEDIT=$ac_cv_prog_NMEDIT
+ if test -n "$NMEDIT"; then
+- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+ $as_echo "$NMEDIT" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6491,9 +6548,9 @@
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+ set dummy nmedit; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_NMEDIT"; then
+@@ -6504,24 +6561,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+ if test -n "$ac_ct_NMEDIT"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+ $as_echo "$ac_ct_NMEDIT" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6530,7 +6587,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -6543,9 +6600,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}lipo; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_LIPO+set}" = set; then
++if test "${ac_cv_prog_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$LIPO"; then
+@@ -6556,24 +6613,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ LIPO=$ac_cv_prog_LIPO
+ if test -n "$LIPO"; then
+- { $as_echo "$as_me:$LINENO: result: $LIPO" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+ $as_echo "$LIPO" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6583,9 +6640,9 @@
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+ set dummy lipo; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_LIPO"; then
+@@ -6596,24 +6653,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+ if test -n "$ac_ct_LIPO"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+ $as_echo "$ac_ct_LIPO" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6622,7 +6679,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -6635,9 +6692,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}otool; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_OTOOL+set}" = set; then
++if test "${ac_cv_prog_OTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$OTOOL"; then
+@@ -6648,24 +6705,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ OTOOL=$ac_cv_prog_OTOOL
+ if test -n "$OTOOL"; then
+- { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+ $as_echo "$OTOOL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6675,9 +6732,9 @@
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+ set dummy otool; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_OTOOL"; then
+@@ -6688,24 +6745,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+ if test -n "$ac_ct_OTOOL"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+ $as_echo "$ac_ct_OTOOL" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6714,7 +6771,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -6727,9 +6784,9 @@
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}otool64; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_OTOOL64+set}" = set; then
++if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$OTOOL64"; then
+@@ -6740,24 +6797,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ OTOOL64=$ac_cv_prog_OTOOL64
+ if test -n "$OTOOL64"; then
+- { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+ $as_echo "$OTOOL64" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6767,9 +6824,9 @@
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+ set dummy otool64; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$ac_ct_OTOOL64"; then
+@@ -6780,24 +6837,24 @@
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+ done
+-done
++ done
+ IFS=$as_save_IFS
+
+ fi
+ fi
+ ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+ if test -n "$ac_ct_OTOOL64"; then
+- { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+ $as_echo "$ac_ct_OTOOL64" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -6806,7 +6863,7 @@
+ else
+ case $cross_compiling:$ac_tool_warned in
+ yes:)
+-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+ $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ ac_tool_warned=yes ;;
+ esac
+@@ -6842,9 +6899,9 @@
+
+
+
+- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+ $as_echo_n "checking for -single_module linker flag... " >&6; }
+-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
++if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_apple_cc_single_mod=no
+@@ -6869,22 +6926,18 @@
+ rm -f conftest.*
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+ $as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+ $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -6895,42 +6948,17 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- lt_cv_ld_exported_symbols_list=no
++ lt_cv_ld_exported_symbols_list=no
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+ $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+@@ -6968,16 +6996,12 @@
+ esac
+
+
+-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+ $as_echo_n "checking for ANSI C header files... " >&6; }
+-if test "${ac_cv_header_stdc+set}" = set; then
++if test "${ac_cv_header_stdc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <stdlib.h>
+ #include <stdarg.h>
+@@ -6992,48 +7016,23 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_header_stdc=no
++ ac_cv_header_stdc=no
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <string.h>
+
+ _ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- $EGREP "memchr" >/dev/null 2>&1; then
+- :
++ $EGREP "memchr" >/dev/null 2>&1; then :
++
+ else
+ ac_cv_header_stdc=no
+ fi
+@@ -7043,18 +7042,14 @@
+
+ if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <stdlib.h>
+
+ _ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- $EGREP "free" >/dev/null 2>&1; then
+- :
++ $EGREP "free" >/dev/null 2>&1; then :
++
+ else
+ ac_cv_header_stdc=no
+ fi
+@@ -7064,14 +7059,10 @@
+
+ if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+- if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then :
+ :
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ #include <ctype.h>
+ #include <stdlib.h>
+@@ -7098,118 +7089,34 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- :
++if ac_fn_c_try_run "$LINENO"; then :
++
+ else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-( exit $ac_status )
+-ac_cv_header_stdc=no
++ ac_cv_header_stdc=no
+ fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
+ fi
+
+-
+ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+ $as_echo "$ac_cv_header_stdc" >&6; }
+ if test $ac_cv_header_stdc = yes; then
+
+-cat >>confdefs.h <<\_ACEOF
+-#define STDC_HEADERS 1
+-_ACEOF
++$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+ fi
+
+ # On IRIX 5.3, sys/types and inttypes.h are conflicting.
+-
+-
+-
+-
+-
+-
+-
+-
+-
+ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+-do
+-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+-$as_echo_n "checking for $ac_header... " >&6; }
+-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+- $as_echo_n "(cached) " >&6
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-
+-#include <$ac_header>
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- eval "$as_ac_Header=yes"
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- eval "$as_ac_Header=no"
+-fi
+-
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-fi
+-ac_res=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+-$as_echo "$ac_res" >&6; }
+-as_val=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- if test "x$as_val" = x""yes; then
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
++"
++eval as_val=\$$as_ac_Header
++ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+ #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+ _ACEOF
+@@ -7219,62 +7126,13 @@
+ done
+
+
+-
+ for ac_header in dlfcn.h
+-do
+-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+-$as_echo_n "checking for $ac_header... " >&6; }
+-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+- $as_echo_n "(cached) " >&6
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-
+-#include <$ac_header>
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- eval "$as_ac_Header=yes"
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- eval "$as_ac_Header=no"
+-fi
+-
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-fi
+-ac_res=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+-$as_echo "$ac_res" >&6; }
+-as_val=`eval 'as_val=${'$as_ac_Header'}
+- $as_echo "$as_val"'`
+- if test "x$as_val" = x""yes; then
++do :
++ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
++"
++if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++#define HAVE_DLFCN_H 1
+ _ACEOF
+
+ fi
+@@ -7292,7 +7150,7 @@
+
+
+ # Check whether --enable-shared was given.
+-if test "${enable_shared+set}" = set; then
++if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+@@ -7323,7 +7181,7 @@
+
+
+ # Check whether --enable-static was given.
+-if test "${enable_static+set}" = set; then
++if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+@@ -7355,7 +7213,7 @@
+
+
+ # Check whether --with-pic was given.
+-if test "${with_pic+set}" = set; then
++if test "${with_pic+set}" = set; then :
+ withval=$with_pic; pic_mode="$withval"
+ else
+ pic_mode=default
+@@ -7371,7 +7229,7 @@
+
+
+ # Check whether --enable-fast-install was given.
+-if test "${enable_fast_install+set}" = set; then
++if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+@@ -7452,9 +7310,9 @@
+ setopt NO_GLOB_SUBST
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+ $as_echo_n "checking for objdir... " >&6; }
+-if test "${lt_cv_objdir+set}" = set; then
++if test "${lt_cv_objdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ rm -f .libs 2>/dev/null
+@@ -7467,7 +7325,7 @@
+ fi
+ rmdir .libs 2>/dev/null
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+ $as_echo "$lt_cv_objdir" >&6; }
+ objdir=$lt_cv_objdir
+
+@@ -7560,9 +7418,9 @@
+ case $deplibs_check_method in
+ file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+ $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ case $MAGIC_CMD in
+@@ -7613,10 +7471,10 @@
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+ $as_echo "$MAGIC_CMD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -7626,9 +7484,9 @@
+
+ if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+- { $as_echo "$as_me:$LINENO: checking for file" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+ $as_echo_n "checking for file... " >&6; }
+-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ case $MAGIC_CMD in
+@@ -7679,10 +7537,10 @@
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+ $as_echo "$MAGIC_CMD" >&6; }
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ $as_echo "no" >&6; }
+ fi
+
+@@ -7759,9 +7617,9 @@
+ if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+- { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_prog_compiler_rtti_exceptions=no
+@@ -7777,11 +7635,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:7395: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:7394: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:7780: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7638: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:7399: \$? = $ac_status" >&5
-+ echo "$as_me:7398: \$? = $ac_status" >&5
+- echo "$as_me:7784: \$? = $ac_status" >&5
++ echo "$as_me:7642: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -7682,11 +7681,11 @@
+@@ -7794,7 +7652,7 @@
+ $RM conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+ $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+ if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+@@ -7814,7 +7672,7 @@
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
+
+-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+@@ -7946,7 +7804,7 @@
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+- linux* | k*bsd*-gnu)
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+@@ -8086,7 +7944,7 @@
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+ esac
+-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+ $as_echo "$lt_prog_compiler_pic" >&6; }
+
+
+@@ -8098,9 +7956,9 @@
+ # Check to make sure the PIC flag actually works.
+ #
+ if test -n "$lt_prog_compiler_pic"; then
+- { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+ $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_prog_compiler_pic_works=no
+@@ -8116,11 +7974,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:7685: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:7684: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:8119: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:7977: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:7689: \$? = $ac_status" >&5
-+ echo "$as_me:7688: \$? = $ac_status" >&5
+- echo "$as_me:8123: \$? = $ac_status" >&5
++ echo "$as_me:7981: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -7786,11 +7785,11 @@
+@@ -8133,7 +7991,7 @@
+ $RM conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+ $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+ if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+@@ -8157,9 +8015,9 @@
+ # Check to make sure the static flag actually works.
+ #
+ wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+ $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
++if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_prog_compiler_static_works=no
+@@ -8185,7 +8043,7 @@
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+ $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+ if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+@@ -8200,9 +8058,9 @@
+
+
+
+- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+ $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
++if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_prog_compiler_c_o=no
+@@ -8221,11 +8079,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:7789: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:7788: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:8224: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:8082: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:7793: \$? = $ac_status" >&5
-+ echo "$as_me:7792: \$? = $ac_status" >&5
+- echo "$as_me:8228: \$? = $ac_status" >&5
++ echo "$as_me:8086: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
-@@ -8050,12 +8049,13 @@
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+@@ -8247,7 +8105,7 @@
+ $RM conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+@@ -8255,9 +8113,9 @@
+
+
+
+- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+ $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
++if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+ lt_cv_prog_compiler_c_o=no
+@@ -8276,11 +8134,11 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:8279: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:8137: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+- echo "$as_me:8283: \$? = $ac_status" >&5
++ echo "$as_me:8141: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+@@ -8302,7 +8160,7 @@
+ $RM conftest*
+
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+@@ -8311,7 +8169,7 @@
+ hard_links="nottested"
+ if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+ $as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+@@ -8319,10 +8177,10 @@
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+ $as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+ $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+@@ -8335,7 +8193,7 @@
+
+
+
+- { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+ $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+@@ -8395,6 +8253,9 @@
+ openbsd*)
+ with_gnu_ld=no
+ ;;
++ linux* | k*bsd*-gnu)
++ link_all_deplibs=no
++ ;;
+ esac
+
+ ld_shlibs=yes
+@@ -8416,6 +8277,7 @@
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
++ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+@@ -8507,7 +8369,7 @@
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+- gnu* | linux* | tpf* | k*bsd*-gnu)
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+@@ -8577,7 +8439,7 @@
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+@@ -8752,6 +8614,7 @@
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
fi
+ link_all_deplibs=no
else
- ld_shlibs=no
- fi
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -8777,11 +8640,7 @@
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -8792,27 +8651,7 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -8826,16 +8665,9 @@
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+@@ -8848,11 +8680,7 @@
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -8863,27 +8691,7 @@
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+@@ -8897,16 +8705,9 @@
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+@@ -9118,42 +8919,16 @@
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- cat >conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ int foo(void) {}
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
++if ac_fn_c_try_link "$LINENO"; then :
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+@@ -9166,7 +8941,7 @@
+ link_all_deplibs=yes
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
-@@ -8599,7 +8599,7 @@
- link_all_deplibs=yes
- ;;
-
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -9294,13 +9294,11 @@
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
+@@ -9409,7 +9184,7 @@
+ fi
+ fi
+
+-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+ $as_echo "$ld_shlibs" >&6; }
+ test "$ld_shlibs" = no && can_build_shared=no
+
+@@ -9446,16 +9221,16 @@
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } 2>conftest.err; then
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+@@ -9469,11 +9244,11 @@
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
+ then
+ archive_cmds_need_lc=no
+ else
+@@ -9484,7 +9259,7 @@
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+ $as_echo "$archive_cmds_need_lc" >&6; }
+ ;;
+ esac
+@@ -9648,7 +9423,7 @@
+
+
+
+- { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+ $as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+ if test "$GCC" = yes; then
+@@ -10050,1228 +9825,300 @@
hardcode_into_libs=yes
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+ ;;
+
+-# No shared lib support for Linux oldld, aout, or coff.
+-linux*oldld* | linux*aout* | linux*coff*)
+- dynamic_linker=no
+- ;;
+-
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- # Some binutils ld are patched to set DT_RUNPATH
+- save_LDFLAGS=$LDFLAGS
+- save_libdir=$libdir
+- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-
+-int
+-main ()
+-{
+-
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+- shlibpath_overrides_runpath=yes
+-fi
+-
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+- LDFLAGS=$save_LDFLAGS
+- libdir=$save_libdir
+-
+- # This implies no fast_install, which is unacceptable.
+- # Some rework will be needed to allow for fast_install
+- # before this can be enabled.
+- hardcode_into_libs=yes
+-
+- # Append ld.so.conf contents to the search path
+- if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+- fi
+-
+- # We used to test for /lib/ld.so.1 and disable shared libraries on
+- # powerpc, because MkLinux only supported shared libraries with the
+- # GNU dynamic linker. Since this was broken with cross compilers,
+- # most powerpc-linux boxes support dynamic linking these days and
+- # people can always --disable-shared, the test was removed, and we
+- # assume the GNU/Linux dynamic linker is in use.
+- dynamic_linker='GNU/Linux ld.so'
+- ;;
+-
+-netbsd*)
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- dynamic_linker='NetBSD (a.out) ld.so'
+- else
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='NetBSD ld.elf_so'
+- fi
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+-
+-newsos6)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- ;;
+-
+-*nto* | *qnx*)
+- version_type=qnx
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='ldqnx.so'
+- ;;
+-
+-openbsd*)
+- version_type=sunos
+- sys_lib_dlsearch_path_spec="/usr/lib"
+- need_lib_prefix=no
+- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+- case $host_os in
+- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+- *) need_version=no ;;
+- esac
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- case $host_os in
+- openbsd2.[89] | openbsd2.[89].*)
+- shlibpath_overrides_runpath=no
+- ;;
+- *)
+- shlibpath_overrides_runpath=yes
+- ;;
+- esac
+- else
+- shlibpath_overrides_runpath=yes
+- fi
+- ;;
+-
+-os2*)
+- libname_spec='$name'
+- shrext_cmds=".dll"
+- need_lib_prefix=no
+- library_names_spec='$libname${shared_ext} $libname.a'
+- dynamic_linker='OS/2 ld.exe'
+- shlibpath_var=LIBPATH
+- ;;
+-
+-osf3* | osf4* | osf5*)
+- version_type=osf
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+- ;;
+-
+-rdos*)
+- dynamic_linker=no
+- ;;
+-
+-solaris*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- # ldd complains unless libraries are executable
+- postinstall_cmds='chmod +x $lib'
+- ;;
+-
+-sunos4*)
+- version_type=sunos
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- if test "$with_gnu_ld" = yes; then
+- need_lib_prefix=no
+- fi
+- need_version=yes
+- ;;
+-
+-sysv4 | sysv4.3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_vendor in
+- sni)
+- shlibpath_overrides_runpath=no
+- need_lib_prefix=no
+- runpath_var=LD_RUN_PATH
+- ;;
+- siemens)
+- need_lib_prefix=no
+- ;;
+- motorola)
+- need_lib_prefix=no
+- need_version=no
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+- ;;
+- esac
+- ;;
+-
+-sysv4*MP*)
+- if test -d /usr/nec ;then
+- version_type=linux
+- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+- soname_spec='$libname${shared_ext}.$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- fi
+- ;;
+-
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- version_type=freebsd-elf
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- if test "$with_gnu_ld" = yes; then
+- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+- else
+- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+- case $host_os in
+- sco3.2v5*)
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+- ;;
+- esac
+- fi
+- sys_lib_dlsearch_path_spec='/usr/lib'
+- ;;
+-
+-tpf*)
+- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+-
+-uts4*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+-
+-*)
+- dynamic_linker=no
+- ;;
+-esac
+-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+-$as_echo "$dynamic_linker" >&6; }
+-test "$dynamic_linker" = no && can_build_shared=no
+-
+-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+-if test "$GCC" = yes; then
+- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+-fi
+-
+-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+-fi
+-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+-fi
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+- { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+-hardcode_action=
+-if test -n "$hardcode_libdir_flag_spec" ||
+- test -n "$runpath_var" ||
+- test "X$hardcode_automatic" = "Xyes" ; then
+-
+- # We can hardcode non-existent directories.
+- if test "$hardcode_direct" != no &&
+- # If the only mechanism to avoid hardcoding is shlibpath_var, we
+- # have to relink, otherwise we might link with an installed library
+- # when we should be linking with a yet-to-be-installed one
+- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+- test "$hardcode_minus_L" != no; then
+- # Linking always hardcodes the temporary library directory.
+- hardcode_action=relink
+- else
+- # We can link without hardcoding, and we can hardcode nonexisting dirs.
+- hardcode_action=immediate
+- fi
+-else
+- # We cannot hardcode anything, or else we can only hardcode existing
+- # directories.
+- hardcode_action=unsupported
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+-$as_echo "$hardcode_action" >&6; }
+-
+-if test "$hardcode_action" = relink ||
+- test "$inherit_rpath" = yes; then
+- # Fast installation is not supported
+- enable_fast_install=no
+-elif test "$shlibpath_overrides_runpath" = yes ||
+- test "$enable_shared" = no; then
+- # Fast installation is not necessary
+- enable_fast_install=needless
+-fi
+-
+-
+-
+-
+-
+-
+- if test "x$enable_dlopen" != xyes; then
+- enable_dlopen=unknown
+- enable_dlopen_self=unknown
+- enable_dlopen_self_static=unknown
+-else
+- lt_cv_dlopen=no
+- lt_cv_dlopen_libs=
+-
+- case $host_os in
+- beos*)
+- lt_cv_dlopen="load_add_on"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ;;
+-
+- mingw* | pw32* | cegcc*)
+- lt_cv_dlopen="LoadLibrary"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- cygwin*)
+- lt_cv_dlopen="dlopen"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- darwin*)
+- # if libdl is installed we need to link against it
+- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+-$as_echo_n "checking for dlopen in -ldl... " >&6; }
+-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- ac_check_lib_save_LIBS=$LIBS
+-LIBS="-ldl $LIBS"
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dlopen ();
+-int
+-main ()
+-{
+-return dlopen ();
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_lib_dl_dlopen=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_lib_dl_dlopen=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-LIBS=$ac_check_lib_save_LIBS
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+-else
+-
+- lt_cv_dlopen="dyld"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+-
+-fi
+-
+- ;;
+-
+- *)
+- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
+-$as_echo_n "checking for shl_load... " >&6; }
+-if test "${ac_cv_func_shl_load+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+- For example, HP-UX 11i <limits.h> declares gettimeofday. */
+-#define shl_load innocuous_shl_load
+-
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char shl_load (); below.
+- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+- <limits.h> exists even on freestanding compilers. */
+-
+-#ifdef __STDC__
+-# include <limits.h>
+-#else
+-# include <assert.h>
+-#endif
+-
+-#undef shl_load
+-
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char shl_load ();
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined __stub_shl_load || defined __stub___shl_load
+-choke me
+-#endif
+-
+-int
+-main ()
+-{
+-return shl_load ();
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_func_shl_load=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_func_shl_load=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+-$as_echo "$ac_cv_func_shl_load" >&6; }
+-if test "x$ac_cv_func_shl_load" = x""yes; then
+- lt_cv_dlopen="shl_load"
+-else
+- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+-$as_echo_n "checking for shl_load in -ldld... " >&6; }
+-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- ac_check_lib_save_LIBS=$LIBS
+-LIBS="-ldld $LIBS"
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char shl_load ();
+-int
+-main ()
+-{
+-return shl_load ();
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_lib_dld_shl_load=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_lib_dld_shl_load=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-LIBS=$ac_check_lib_save_LIBS
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
+- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+-else
+- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
+-$as_echo_n "checking for dlopen... " >&6; }
+-if test "${ac_cv_func_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+- For example, HP-UX 11i <limits.h> declares gettimeofday. */
+-#define dlopen innocuous_dlopen
+-
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char dlopen (); below.
+- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+- <limits.h> exists even on freestanding compilers. */
+-
+-#ifdef __STDC__
+-# include <limits.h>
+-#else
+-# include <assert.h>
+-#endif
+-
+-#undef dlopen
+-
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dlopen ();
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined __stub_dlopen || defined __stub___dlopen
+-choke me
+-#endif
+-
+-int
+-main ()
+-{
+-return dlopen ();
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_func_dlopen=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_func_dlopen=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+-$as_echo "$ac_cv_func_dlopen" >&6; }
+-if test "x$ac_cv_func_dlopen" = x""yes; then
+- lt_cv_dlopen="dlopen"
+-else
+- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+-$as_echo_n "checking for dlopen in -ldl... " >&6; }
+-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- ac_check_lib_save_LIBS=$LIBS
+-LIBS="-ldl $LIBS"
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dlopen ();
+-int
+-main ()
+-{
+-return dlopen ();
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_lib_dl_dlopen=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_lib_dl_dlopen=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-LIBS=$ac_check_lib_save_LIBS
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+-else
+- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- ac_check_lib_save_LIBS=$LIBS
+-LIBS="-lsvld $LIBS"
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dlopen ();
+-int
+-main ()
+-{
+-return dlopen ();
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_lib_svld_dlopen=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_lib_svld_dlopen=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-LIBS=$ac_check_lib_save_LIBS
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
+- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+-else
+- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+-$as_echo_n "checking for dld_link in -ldld... " >&6; }
+-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- ac_check_lib_save_LIBS=$LIBS
+-LIBS="-ldld $LIBS"
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++ dynamic_linker=no
++ ;;
++
++# This must be Linux ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ # Some binutils ld are patched to set DT_RUNPATH
++ save_LDFLAGS=$LDFLAGS
++ save_libdir=$libdir
++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+-/* Override any GCC internal prototype to avoid an error.
+- Use char because int might match the return type of a GCC
+- builtin and then its argument prototype would still apply. */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dld_link ();
+ int
+ main ()
+ {
+-return dld_link ();
++
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_lib_dld_dld_link=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_lib_dld_dld_link=no
+-fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
+-LIBS=$ac_check_lib_save_LIBS
++if ac_fn_c_try_link "$LINENO"; then :
++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
++ shlibpath_overrides_runpath=yes
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
+- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LDFLAGS=$save_LDFLAGS
++ libdir=$save_libdir
+
++ # This implies no fast_install, which is unacceptable.
++ # Some rework will be needed to allow for fast_install
++ # before this can be enabled.
++ hardcode_into_libs=yes
+
+-fi
++ # Append ld.so.conf contents to the search path
++ if test -f /etc/ld.so.conf; then
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
-@@ -9312,6 +9310,18 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
++ fi
+
++ # We used to test for /lib/ld.so.1 and disable shared libraries on
++ # powerpc, because MkLinux only supported shared libraries with the
++ # GNU dynamic linker. Since this was broken with cross compilers,
++ # most powerpc-linux boxes support dynamic linking these days and
++ # people can always --disable-shared, the test was removed, and we
++ # assume the GNU/Linux dynamic linker is in use.
++ dynamic_linker='GNU/Linux ld.so'
++ ;;
+
+-fi
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
@@ -338,356 +21098,5011 @@
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
-+
- netbsd*)
- version_type=sunos
- need_lib_prefix=no
-@@ -10137,7 +10147,7 @@
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
--#line 10140 "configure"
-+#line 10150 "configure"
- #include "confdefs.h"
-
- #if HAVE_DLFCN_H
-@@ -10237,7 +10247,7 @@
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
--#line 10240 "configure"
-+#line 10250 "configure"
- #include "confdefs.h"
-
- #if HAVE_DLFCN_H
-@@ -11847,7 +11857,7 @@
- ;;
- esac
- ;;
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
-@@ -12548,7 +12558,7 @@
- ;;
- esac
- ;;
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
-@@ -12657,11 +12667,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:12660: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:12670: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
-- echo "$as_me:12664: \$? = $ac_status" >&5
-+ echo "$as_me:12674: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
-@@ -12761,11 +12771,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:12764: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:12774: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
-- echo "$as_me:12768: \$? = $ac_status" >&5
-+ echo "$as_me:12778: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
-@@ -12833,6 +12843,9 @@
- cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
- ;;
-+ linux* | k*bsd*-gnu)
-+ link_all_deplibs_CXX=no
-+ ;;
- *)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
-@@ -13262,13 +13275,11 @@
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
-@@ -13280,6 +13291,18 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-+netbsdelf*-gnu)
-+ version_type=linux
+
++netbsd*)
++ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ dynamic_linker='NetBSD (a.out) ld.so'
++ else
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='NetBSD ld.elf_so'
++ fi
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
+
+-fi
++newsos6)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ ;;
+
++*nto* | *qnx*)
++ version_type=qnx
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
++ dynamic_linker='ldqnx.so'
+ ;;
-+
- netbsd*)
- version_type=sunos
- need_lib_prefix=no
-@@ -14325,11 +14348,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:14328: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14351: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
-- echo "$as_me:14332: \$? = $ac_status" >&5
-+ echo "$as_me:14355: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
-@@ -14429,11 +14452,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:14432: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14455: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
-- echo "$as_me:14436: \$? = $ac_status" >&5
-+ echo "$as_me:14459: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
-@@ -14693,12 +14716,13 @@
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
-+ link_all_deplibs_F77=no
- else
- ld_shlibs_F77=no
- fi
- ;;
-
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
-@@ -15222,7 +15246,7 @@
- link_all_deplibs_F77=yes
- ;;
-
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
-@@ -15865,13 +15889,11 @@
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
-@@ -15883,6 +15905,18 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-+netbsdelf*-gnu)
+
+-fi
++openbsd*)
++ version_type=sunos
++ sys_lib_dlsearch_path_spec="/usr/lib"
++ need_lib_prefix=no
++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++ case $host_os in
++ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++ *) need_version=no ;;
++ esac
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ case $host_os in
++ openbsd2.[89] | openbsd2.[89].*)
++ shlibpath_overrides_runpath=no
++ ;;
++ *)
++ shlibpath_overrides_runpath=yes
++ ;;
++ esac
++ else
++ shlibpath_overrides_runpath=yes
++ fi
++ ;;
+
++os2*)
++ libname_spec='$name'
++ shrext_cmds=".dll"
++ need_lib_prefix=no
++ library_names_spec='$libname${shared_ext} $libname.a'
++ dynamic_linker='OS/2 ld.exe'
++ shlibpath_var=LIBPATH
++ ;;
+
+-fi
++osf3* | osf4* | osf5*)
++ version_type=osf
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ ;;
+
+- ;;
+- esac
++rdos*)
++ dynamic_linker=no
++ ;;
+
+- if test "x$lt_cv_dlopen" != xno; then
+- enable_dlopen=yes
+- else
+- enable_dlopen=no
+- fi
++solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ # ldd complains unless libraries are executable
++ postinstall_cmds='chmod +x $lib'
++ ;;
+
+- case $lt_cv_dlopen in
+- dlopen)
+- save_CPPFLAGS="$CPPFLAGS"
+- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++sunos4*)
++ version_type=sunos
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ if test "$with_gnu_ld" = yes; then
++ need_lib_prefix=no
++ fi
++ need_version=yes
++ ;;
+
+- save_LDFLAGS="$LDFLAGS"
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++sysv4 | sysv4.3*)
++ version_type=linux
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_vendor in
++ sni)
++ shlibpath_overrides_runpath=no
++ need_lib_prefix=no
++ runpath_var=LD_RUN_PATH
++ ;;
++ siemens)
++ need_lib_prefix=no
++ ;;
++ motorola)
++ need_lib_prefix=no
++ need_version=no
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++ ;;
++ esac
++ ;;
+
+- save_LIBS="$LIBS"
+- LIBS="$lt_cv_dlopen_libs $LIBS"
++sysv4*MP*)
++ if test -d /usr/nec ;then
++ version_type=linux
++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++ soname_spec='$libname${shared_ext}.$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ fi
++ ;;
+
+- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+-if test "${lt_cv_dlopen_self+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- if test "$cross_compiling" = yes; then :
+- lt_cv_dlopen_self=cross
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<_LT_EOF
+-#line 11079 "configure"
+-#include "confdefs.h"
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ version_type=freebsd-elf
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ if test "$with_gnu_ld" = yes; then
++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++ else
++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++ case $host_os in
++ sco3.2v5*)
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++ ;;
++ esac
++ fi
++ sys_lib_dlsearch_path_spec='/usr/lib'
++ ;;
+
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
++tpf*)
++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
-+
- netbsd*)
- version_type=sunos
- need_lib_prefix=no
-@@ -16618,11 +16652,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:16621: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16655: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
-- echo "$as_me:16625: \$? = $ac_status" >&5
-+ echo "$as_me:16659: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
-@@ -16908,11 +16942,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:16911: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16945: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
-- echo "$as_me:16915: \$? = $ac_status" >&5
-+ echo "$as_me:16949: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
-@@ -17012,11 +17046,11 @@
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:17015: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:17049: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
-- echo "$as_me:17019: \$? = $ac_status" >&5
-+ echo "$as_me:17053: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
-@@ -17276,12 +17310,13 @@
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
-+ link_all_deplibs_GCJ=no
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
-@@ -17825,7 +17860,7 @@
- link_all_deplibs_GCJ=yes
- ;;
-
-- netbsd*)
-+ netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
-@@ -18468,13 +18503,11 @@
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
-@@ -18486,6 +18519,18 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-+netbsdelf*-gnu)
+
+-#include <stdio.h>
++uts4*)
+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
++*)
++ dynamic_linker=no
++ ;;
++esac
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
++$as_echo "$dynamic_linker" >&6; }
++test "$dynamic_linker" = no && can_build_shared=no
+
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
+
- netbsd*)
- version_type=sunos
- need_lib_prefix=no
-@@ -21657,21 +21702,22 @@
++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
++fi
++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
++fi
+
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
+
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
+- else
+- puts (dlerror ());
+
+- return status;
+-}
+-_LT_EOF
+- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&5 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+- esac
+- else :
+- # compilation failed
+- lt_cv_dlopen_self=no
+- fi
+-fi
+-rm -fr conftest*
+
+
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+-$as_echo "$lt_cv_dlopen_self" >&6; }
+
+- if test "x$lt_cv_dlopen_self" = xyes; then
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+-if test "${lt_cv_dlopen_self_static+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- if test "$cross_compiling" = yes; then :
+- lt_cv_dlopen_self_static=cross
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<_LT_EOF
+-#line 11175 "configure"
+-#include "confdefs.h"
+
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+
+-#include <stdio.h>
+
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
+
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
+
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
+
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
+- else
+- puts (dlerror ());
+
+- return status;
+-}
+-_LT_EOF
+- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&5 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+- esac
+- else :
+- # compilation failed
+- lt_cv_dlopen_self_static=no
+- fi
+-fi
+-rm -fr conftest*
+
+
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+-$as_echo "$lt_cv_dlopen_self_static" >&6; }
+- fi
+
+- CPPFLAGS="$save_CPPFLAGS"
+- LDFLAGS="$save_LDFLAGS"
+- LIBS="$save_LIBS"
+- ;;
+- esac
+
+- case $lt_cv_dlopen_self in
+- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+- *) enable_dlopen_self=unknown ;;
+- esac
+
+- case $lt_cv_dlopen_self_static in
+- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+- *) enable_dlopen_self_static=unknown ;;
+- esac
+-fi
+
+
+
+@@ -11289,35 +10136,6 @@
+
+
+
+-striplib=
+-old_striplib=
+-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
+-else
+-# FIXME - insert some real tests, host_os isn't really good enough
+- case $host_os in
+- darwin*)
+- if test -n "$STRIP" ; then
+- striplib="$STRIP -x"
+- old_striplib="$STRIP -S"
+- { $as_echo "$as_me:$LINENO: result: yes" >&5
+-$as_echo "yes" >&6; }
+- else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
+- fi
+- ;;
+- *)
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
+- ;;
+- esac
+-fi
+
+
+
+@@ -11330,54 +10148,15 @@
+
+
+
+- # Report which library types will actually be built
+- { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+- { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+-$as_echo "$can_build_shared" >&6; }
+
+- { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+-$as_echo_n "checking whether to build shared libraries... " >&6; }
+- test "$can_build_shared" = "no" && enable_shared=no
+
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+
+- aix[4-9]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+-$as_echo "$enable_shared" >&6; }
+
+- { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+-$as_echo_n "checking whether to build static libraries... " >&6; }
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- { $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+-$as_echo "$enable_static" >&6; }
+
+
+
+
+-fi
+-ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+-CC="$lt_save_CC"
+
+
+
+@@ -11391,375 +10170,277 @@
+
+
+
+- ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+-# Only expand once:
+
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+- # Check whether --enable-maintainer-mode was given.
+-if test "${enable_maintainer_mode+set}" = set; then
+- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+-else
+- USE_MAINTAINER_MODE=no
+-fi
+
+- { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+-$as_echo "$USE_MAINTAINER_MODE" >&6; }
+- if test $USE_MAINTAINER_MODE = yes; then
+- MAINTAINER_MODE_TRUE=
+- MAINTAINER_MODE_FALSE='#'
+-else
+- MAINTAINER_MODE_TRUE='#'
+- MAINTAINER_MODE_FALSE=
+-fi
+
+- MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+-{ $as_echo "$as_me:$LINENO: checking for some Win32 platform" >&5
+-$as_echo_n "checking for some Win32 platform... " >&6; }
+-case "$host" in
+- *-*-mingw*|*-*-cygwin*)
+- platform_win32=yes
+- ;;
+- *)
+- platform_win32=no
+- ;;
+-esac
+-{ $as_echo "$as_me:$LINENO: result: $platform_win32" >&5
+-$as_echo "$platform_win32" >&6; }
+- if test "$platform_win32" = "yes"; then
+- PLATFORM_WIN32_TRUE=
+- PLATFORM_WIN32_FALSE='#'
+-else
+- PLATFORM_WIN32_TRUE='#'
+- PLATFORM_WIN32_FALSE=
+-fi
+
+
+-{ $as_echo "$as_me:$LINENO: checking for native Win32" >&5
+-$as_echo_n "checking for native Win32... " >&6; }
+-case "$host" in
+- *-*-mingw*)
+- os_win32=yes
+- ;;
+- *)
+- os_win32=no
+- ;;
+-esac
+-{ $as_echo "$as_me:$LINENO: result: $os_win32" >&5
+-$as_echo "$os_win32" >&6; }
+- if test "$os_win32" = "yes"; then
+- OS_WIN32_TRUE=
+- OS_WIN32_FALSE='#'
+-else
+- OS_WIN32_TRUE='#'
+- OS_WIN32_FALSE=
+-fi
+
+
+-if test "$os_win32" = "yes"; then
+- # Extract the first word of "lib.exe", so it can be a program name with args.
+-set dummy lib.exe; ac_word=$2
+-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+-$as_echo_n "checking for $ac_word... " >&6; }
+-if test "${ac_cv_prog_ms_librarian+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- if test -n "$ms_librarian"; then
+- ac_cv_prog_ms_librarian="$ms_librarian" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+- IFS=$as_save_IFS
+- test -z "$as_dir" && as_dir=.
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_ms_librarian="yes"
+- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+- break 2
+- fi
+-done
+-done
+-IFS=$as_save_IFS
+
+- test -z "$ac_cv_prog_ms_librarian" && ac_cv_prog_ms_librarian="no"
+-fi
+-fi
+-ms_librarian=$ac_cv_prog_ms_librarian
+-if test -n "$ms_librarian"; then
+- { $as_echo "$as_me:$LINENO: result: $ms_librarian" >&5
+-$as_echo "$ms_librarian" >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
++$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++hardcode_action=
++if test -n "$hardcode_libdir_flag_spec" ||
++ test -n "$runpath_var" ||
++ test "X$hardcode_automatic" = "Xyes" ; then
++
++ # We can hardcode non-existent directories.
++ if test "$hardcode_direct" != no &&
++ # If the only mechanism to avoid hardcoding is shlibpath_var, we
++ # have to relink, otherwise we might link with an installed library
++ # when we should be linking with a yet-to-be-installed one
++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
++ test "$hardcode_minus_L" != no; then
++ # Linking always hardcodes the temporary library directory.
++ hardcode_action=relink
++ else
++ # We can link without hardcoding, and we can hardcode nonexisting dirs.
++ hardcode_action=immediate
++ fi
+ else
+- { $as_echo "$as_me:$LINENO: result: no" >&5
+-$as_echo "no" >&6; }
++ # We cannot hardcode anything, or else we can only hardcode existing
++ # directories.
++ hardcode_action=unsupported
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
++$as_echo "$hardcode_action" >&6; }
+
+-
+-fi
+- if test x$ms_librarian = xyes; then
+- MS_LIB_AVAILABLE_TRUE=
+- MS_LIB_AVAILABLE_FALSE='#'
+-else
+- MS_LIB_AVAILABLE_TRUE='#'
+- MS_LIB_AVAILABLE_FALSE=
++if test "$hardcode_action" = relink ||
++ test "$inherit_rpath" = yes; then
++ # Fast installation is not supported
++ enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++ test "$enable_shared" = no; then
++ # Fast installation is not necessary
++ enable_fast_install=needless
+ fi
+
+
+-if test "x$GCC" = "xyes"; then
+- case " $CFLAGS " in
+- *[\ \ ]-Wall[\ \ ]*) ;;
+- *) CFLAGS="$CFLAGS -Wall" ;;
+- esac
+
+- case " $CFLAGS " in
+- *[\ \ ]-Wmissing-prototypes[\ \ ]*) ;;
+- *) CFLAGS="$CFLAGS -Wmissing-prototypes" ;;
+- esac
+
+- if test "x$enable_ansi" = "xyes"; then
+- case " $CFLAGS " in
+- *[\ \ ]-ansi[\ \ ]*) ;;
+- *) CFLAGS="$CFLAGS -ansi" ;;
+- esac
+
+- case " $CFLAGS " in
+- *[\ \ ]-pedantic[\ \ ]*) ;;
+- *) CFLAGS="$CFLAGS -pedantic" ;;
+- esac
+- fi
+-fi
+
+-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+-# for constant arguments. Useless!
+-{ $as_echo "$as_me:$LINENO: checking for working alloca.h" >&5
+-$as_echo_n "checking for working alloca.h... " >&6; }
+-if test "${ac_cv_working_alloca_h+set}" = set; then
++ if test "x$enable_dlopen" != xyes; then
++ enable_dlopen=unknown
++ enable_dlopen_self=unknown
++ enable_dlopen_self_static=unknown
++else
++ lt_cv_dlopen=no
++ lt_cv_dlopen_libs=
++
++ case $host_os in
++ beos*)
++ lt_cv_dlopen="load_add_on"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ;;
++
++ mingw* | pw32* | cegcc*)
++ lt_cv_dlopen="LoadLibrary"
++ lt_cv_dlopen_libs=
++ ;;
++
++ cygwin*)
++ lt_cv_dlopen="dlopen"
++ lt_cv_dlopen_libs=
++ ;;
++
++ darwin*)
++ # if libdl is installed we need to link against it
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
++$as_echo_n "checking for dlopen in -ldl... " >&6; }
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-#include <alloca.h>
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
+ int
+ main ()
+ {
+-char *p = (char *) alloca (2 * sizeof (int));
+- if (p) return 0;
++return dlopen ();
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_working_alloca_h=yes
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dl_dlopen=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_working_alloca_h=no
++ ac_cv_lib_dl_dlopen=no
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
+-$as_echo "$ac_cv_working_alloca_h" >&6; }
+-if test $ac_cv_working_alloca_h = yes; then
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
++$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
++else
+
+-cat >>confdefs.h <<\_ACEOF
+-#define HAVE_ALLOCA_H 1
+-_ACEOF
++ lt_cv_dlopen="dyld"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
+
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking for alloca" >&5
+-$as_echo_n "checking for alloca... " >&6; }
+-if test "${ac_cv_func_alloca_works+set}" = set; then
++ ;;
++
++ *)
++ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
++if test "x$ac_cv_func_shl_load" = x""yes; then :
++ lt_cv_dlopen="shl_load"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
++$as_echo_n "checking for shl_load in -ldld... " >&6; }
++if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-#ifdef __GNUC__
+-# define alloca __builtin_alloca
+-#else
+-# ifdef _MSC_VER
+-# include <malloc.h>
+-# define alloca _alloca
+-# else
+-# ifdef HAVE_ALLOCA_H
+-# include <alloca.h>
+-# else
+-# ifdef _AIX
+- #pragma alloca
+-# else
+-# ifndef alloca /* predefined by HP cc +Olibcalls */
+-char *alloca ();
+-# endif
+-# endif
+-# endif
+-# endif
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
+ #endif
++char shl_load ();
++int
++main ()
++{
++return shl_load ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dld_shl_load=yes
++else
++ ac_cv_lib_dld_shl_load=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
++$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
++if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
++else
++ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
++if test "x$ac_cv_func_dlopen" = x""yes; then :
++ lt_cv_dlopen="dlopen"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
++$as_echo_n "checking for dlopen in -ldl... " >&6; }
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
+ int
+ main ()
+ {
+-char *p = (char *) alloca (1);
+- if (p) return 0;
++return dlopen ();
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- ac_cv_func_alloca_works=yes
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dl_dlopen=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_func_alloca_works=no
++ ac_cv_lib_dl_dlopen=no
+ fi
+-
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
+-$as_echo "$ac_cv_func_alloca_works" >&6; }
+-
+-if test $ac_cv_func_alloca_works = yes; then
+-
+-cat >>confdefs.h <<\_ACEOF
+-#define HAVE_ALLOCA 1
+-_ACEOF
+-
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
++$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ else
+- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+-# that cause trouble. Some versions do not even contain alloca or
+-# contain a buggy version. If you still want to use their alloca,
+-# use ar to extract alloca.o from them instead of compiling alloca.c.
+-
+-ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+-
+-cat >>confdefs.h <<\_ACEOF
+-#define C_ALLOCA 1
+-_ACEOF
+-
+-
+-{ $as_echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
+-$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+-if test "${ac_cv_os_cray+set}" = set; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
++$as_echo_n "checking for dlopen in -lsvld... " >&6; }
++if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-lsvld $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-#if defined CRAY && ! defined CRAY2
+-webecray
+-#else
+-wenotbecray
+-#endif
+
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++ ;
++ return 0;
++}
+ _ACEOF
+-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- $EGREP "webecray" >/dev/null 2>&1; then
+- ac_cv_os_cray=yes
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_svld_dlopen=yes
+ else
+- ac_cv_os_cray=no
++ ac_cv_lib_svld_dlopen=no
+ fi
+-rm -f conftest*
+-
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
+-$as_echo "$ac_cv_os_cray" >&6; }
+-if test $ac_cv_os_cray = yes; then
+- for ac_func in _getb67 GETB67 getb67; do
+- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
+-$as_echo_n "checking for $ac_func... " >&6; }
+-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
++$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
++if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
++$as_echo_n "checking for dld_link in -ldld... " >&6; }
++if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+- For example, HP-UX 11i <limits.h> declares gettimeofday. */
+-#define $ac_func innocuous_$ac_func
+-
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func (); below.
+- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+- <limits.h> exists even on freestanding compilers. */
+-
+-#ifdef __STDC__
+-# include <limits.h>
+-#else
+-# include <assert.h>
+-#endif
+-
+-#undef $ac_func
+
+ /* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+@@ -11767,1996 +10448,1088 @@
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+-char $ac_func ();
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined __stub_$ac_func || defined __stub___$ac_func
+-choke me
+-#endif
+-
++char dld_link ();
+ int
+ main ()
+ {
+-return $ac_func ();
++return dld_link ();
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest$ac_exeext && {
+- test "$cross_compiling" = yes ||
+- $as_test_x conftest$ac_exeext
+- }; then
+- eval "$as_ac_var=yes"
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dld_dld_link=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ ac_cv_lib_dld_dld_link=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
++$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
++if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
++fi
++
+
+- eval "$as_ac_var=no"
+ fi
+
+-rm -rf conftest.dSYM
+-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+- conftest$ac_exeext conftest.$ac_ext
++
+ fi
+-ac_res=`eval 'as_val=${'$as_ac_var'}
+- $as_echo "$as_val"'`
+- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+-$as_echo "$ac_res" >&6; }
+-as_val=`eval 'as_val=${'$as_ac_var'}
+- $as_echo "$as_val"'`
+- if test "x$as_val" = x""yes; then
+
+-cat >>confdefs.h <<_ACEOF
+-#define CRAY_STACKSEG_END $ac_func
+-_ACEOF
+
+- break
+ fi
+
+- done
++
+ fi
+
+-{ $as_echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
+-$as_echo_n "checking stack direction for C alloca... " >&6; }
+-if test "${ac_cv_c_stack_direction+set}" = set; then
++
++fi
++
++ ;;
++ esac
++
++ if test "x$lt_cv_dlopen" != xno; then
++ enable_dlopen=yes
++ else
++ enable_dlopen=no
++ fi
++
++ case $lt_cv_dlopen in
++ dlopen)
++ save_CPPFLAGS="$CPPFLAGS"
++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++ save_LDFLAGS="$LDFLAGS"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++ save_LIBS="$LIBS"
++ LIBS="$lt_cv_dlopen_libs $LIBS"
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
++$as_echo_n "checking whether a program can dlopen itself... " >&6; }
++if test "${lt_cv_dlopen_self+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- if test "$cross_compiling" = yes; then
+- ac_cv_c_stack_direction=0
++ if test "$cross_compiling" = yes; then :
++ lt_cv_dlopen_self=cross
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-find_stack_direction ()
+-{
+- static char *addr = 0;
+- auto char dummy;
+- if (addr == 0)
+- {
+- addr = &dummy;
+- return find_stack_direction ();
+- }
+- else
+- return (&dummy > addr) ? 1 : -1;
+-}
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<_LT_EOF
++#line 10521 "configure"
++#include "confdefs.h"
+
+-int
+-main ()
+-{
+- return find_stack_direction () < 0;
+-}
+-_ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_c_stack_direction=1
+-else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
+
+-( exit $ac_status )
+-ac_cv_c_stack_direction=-1
+-fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+-fi
++void fnord() { int i=42;}
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
+
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
+
++ return status;
++}
++_LT_EOF
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&5 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
++ esac
++ else :
++ # compilation failed
++ lt_cv_dlopen_self=no
++ fi
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
+-$as_echo "$ac_cv_c_stack_direction" >&6; }
+-
+-cat >>confdefs.h <<_ACEOF
+-#define STACK_DIRECTION $ac_cv_c_stack_direction
+-_ACEOF
++rm -fr conftest*
+
+
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
++$as_echo "$lt_cv_dlopen_self" >&6; }
+
+-
+-
+- { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+-$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+-if test "${ac_cv_c_bigendian+set}" = set; then
++ if test "x$lt_cv_dlopen_self" = xyes; then
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
++$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
++if test "${lt_cv_dlopen_self_static+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- ac_cv_c_bigendian=unknown
+- # See if we're dealing with a universal compiler.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-#ifndef __APPLE_CC__
+- not a universal capable compiler
+- #endif
+- typedef int dummy;
+-
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+-
+- # Check for potential -arch flags. It is not universal unless
+- # there are some -arch flags. Note that *ppc* also matches
+- # ppc64. This check is also rather less than ideal.
+- case "${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}" in #(
+- *-arch*ppc*|*-arch*i386*|*-arch*x86_64*) ac_cv_c_bigendian=universal;;
+- esac
++ if test "$cross_compiling" = yes; then :
++ lt_cv_dlopen_self_static=cross
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<_LT_EOF
++#line 10617 "configure"
++#include "confdefs.h"
+
+-fi
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- if test $ac_cv_c_bigendian = unknown; then
+- # See if sys/param.h defines the BYTE_ORDER macro.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-#include <sys/types.h>
+- #include <sys/param.h>
++#include <stdio.h>
+
+-int
+-main ()
+-{
+-#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+- && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+- && LITTLE_ENDIAN)
+- bogus endian macros
+- #endif
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- # It does; now see whether it defined to BIG_ENDIAN or not.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-#include <sys/types.h>
+- #include <sys/param.h>
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
+
+-int
+-main ()
++void fnord() { int i=42;}
++int main ()
+ {
+-#if BYTE_ORDER != BIG_ENDIAN
+- not big endian
+- #endif
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
+
+- ;
+- return 0;
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
++
++ return status;
+ }
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
++_LT_EOF
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++ (eval $ac_link) 2>&5
+ ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_cv_c_bigendian=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_cv_c_bigendian=no
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&5 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
++ esac
++ else :
++ # compilation failed
++ lt_cv_dlopen_self_static=no
++ fi
+ fi
+-
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++rm -fr conftest*
+
+
+ fi
+-
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
++$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+- if test $ac_cv_c_bigendian = unknown; then
+- # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-#include <limits.h>
+-
+-int
+-main ()
+-{
+-#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+- bogus endian macros
+- #endif
+-
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- # It does; now see whether it defined to _BIG_ENDIAN or not.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-#include <limits.h>
+-
+-int
+-main ()
+-{
+-#ifndef _BIG_ENDIAN
+- not big endian
+- #endif
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_cv_c_bigendian=yes
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ CPPFLAGS="$save_CPPFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++ LIBS="$save_LIBS"
++ ;;
++ esac
++
++ case $lt_cv_dlopen_self in
++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++ *) enable_dlopen_self=unknown ;;
++ esac
+
+- ac_cv_c_bigendian=no
++ case $lt_cv_dlopen_self_static in
++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++ *) enable_dlopen_self_static=unknown ;;
++ esac
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- fi
+- if test $ac_cv_c_bigendian = unknown; then
+- # Compile a test program.
+- if test "$cross_compiling" = yes; then
+- # Try to guess by grepping values from an object file.
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-short int ascii_mm[] =
+- { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+- short int ascii_ii[] =
+- { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+- int use_ascii (int i) {
+- return ascii_mm[i] + ascii_ii[i];
+- }
+- short int ebcdic_ii[] =
+- { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+- short int ebcdic_mm[] =
+- { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+- int use_ebcdic (int i) {
+- return ebcdic_mm[i] + ebcdic_ii[i];
+- }
+- extern int foo;
+
+-int
+-main ()
+-{
+-return use_ascii (foo) == use_ebcdic (foo);
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+- ac_cv_c_bigendian=yes
+- fi
+- if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+- if test "$ac_cv_c_bigendian" = unknown; then
+- ac_cv_c_bigendian=no
+- else
+- # finding both strings is unlikely to happen, but who knows?
+- ac_cv_c_bigendian=unknown
+- fi
+- fi
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+
+- /* Are we little or big endian? From Harbison&Steele. */
+- union
+- {
+- long int l;
+- char c[sizeof (long int)];
+- } u;
+- u.l = 1;
+- return u.c[sizeof (long int) - 1] == 1;
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_c_bigendian=no
+-else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+-( exit $ac_status )
+-ac_cv_c_bigendian=yes
+-fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+-fi
+
+
++
++
++
++
++striplib=
++old_striplib=
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
++$as_echo_n "checking whether stripping libraries is possible... " >&6; }
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++ case $host_os in
++ darwin*)
++ if test -n "$STRIP" ; then
++ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++ else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
++ ;;
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++ ;;
++ esac
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+-$as_echo "$ac_cv_c_bigendian" >&6; }
+- case $ac_cv_c_bigendian in #(
+- yes)
+- cat >>confdefs.h <<\_ACEOF
+-#define WORDS_BIGENDIAN 1
+-_ACEOF
+-;; #(
+- no)
+- ;; #(
+- universal)
+
+-cat >>confdefs.h <<\_ACEOF
+-#define AC_APPLE_UNIVERSAL_BUILD 1
+-_ACEOF
+
+- ;; #(
+- *)
+- { { $as_echo "$as_me:$LINENO: error: unknown endianness
+- presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+-$as_echo "$as_me: error: unknown endianness
+- presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+- { (exit 1); exit 1; }; } ;;
+- esac
+
+
+-# The cast to long int works around a bug in the HP C Compiler
+-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+-# This bug is HP SR number 8606223364.
+-{ $as_echo "$as_me:$LINENO: checking size of char" >&5
+-$as_echo_n "checking size of char... " >&6; }
+-if test "${ac_cv_sizeof_char+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- if test "$cross_compiling" = yes; then
+- # Depending upon the size, compute the lo and hi bounds.
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (char))) >= 0)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=0 ac_mid=0
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (char))) <= $ac_mid)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid; break
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_lo=`expr $ac_mid + 1`
+- if test $ac_lo -le $ac_mid; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid + 1`
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (char))) < 0)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=-1 ac_mid=-1
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (char))) >= $ac_mid)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=$ac_mid; break
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_hi=`expr '(' $ac_mid ')' - 1`
+- if test $ac_mid -le $ac_hi; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid`
+-fi
++ # Report which library types will actually be built
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
++$as_echo_n "checking if libtool supports shared libraries... " >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
++$as_echo "$can_build_shared" >&6; }
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
++$as_echo_n "checking whether to build shared libraries... " >&6; }
++ test "$can_build_shared" = "no" && enable_shared=no
++
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++
++ aix[4-9]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
++$as_echo "$enable_shared" >&6; }
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
++$as_echo_n "checking whether to build static libraries... " >&6; }
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
++$as_echo "$enable_static" >&6; }
++
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_lo= ac_hi=
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-# Binary search between lo and hi bounds.
+-while test "x$ac_lo" != "x$ac_hi"; do
+- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (char))) <= $ac_mid)];
+-test_array [0] = 0
++CC="$lt_save_CC"
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_lo=`expr '(' $ac_mid ')' + 1`
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-done
+-case $ac_lo in
+-?*) ac_cv_sizeof_char=$ac_lo;;
+-'') if test "$ac_cv_type_char" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (char)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (char)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
+- else
+- ac_cv_sizeof_char=0
+- fi ;;
+-esac
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-static long int longval () { return (long int) (sizeof (char)); }
+-static unsigned long int ulongval () { return (long int) (sizeof (char)); }
+-#include <stdio.h>
+-#include <stdlib.h>
+-int
+-main ()
+-{
+
+- FILE *f = fopen ("conftest.val", "w");
+- if (! f)
+- return 1;
+- if (((long int) (sizeof (char))) < 0)
+- {
+- long int i = longval ();
+- if (i != ((long int) (sizeof (char))))
+- return 1;
+- fprintf (f, "%ld", i);
+- }
+- else
+- {
+- unsigned long int i = ulongval ();
+- if (i != ((long int) (sizeof (char))))
+- return 1;
+- fprintf (f, "%lu", i);
+- }
+- /* Do not output a trailing newline, as this causes \r\n confusion
+- on some platforms. */
+- return ferror (f) || fclose (f) != 0;
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_sizeof_char=`cat conftest.val`
+-else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+-( exit $ac_status )
+-if test "$ac_cv_type_char" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (char)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (char)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
+- else
+- ac_cv_sizeof_char=0
+- fi
+-fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+-fi
+-rm -f conftest.val
+-fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5
+-$as_echo "$ac_cv_sizeof_char" >&6; }
+
+
+
+-cat >>confdefs.h <<_ACEOF
+-#define SIZEOF_CHAR $ac_cv_sizeof_char
+-_ACEOF
+
+
+-ART_SIZEOF_CHAR=$ac_cv_sizeof_char
+
+-# The cast to long int works around a bug in the HP C Compiler
+-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+-# This bug is HP SR number 8606223364.
+-{ $as_echo "$as_me:$LINENO: checking size of short" >&5
+-$as_echo_n "checking size of short... " >&6; }
+-if test "${ac_cv_sizeof_short+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- if test "$cross_compiling" = yes; then
+- # Depending upon the size, compute the lo and hi bounds.
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (short))) >= 0)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=0 ac_mid=0
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (short))) <= $ac_mid)];
+-test_array [0] = 0
++ ac_config_commands="$ac_config_commands libtool"
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid; break
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_lo=`expr $ac_mid + 1`
+- if test $ac_lo -le $ac_mid; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid + 1`
++
++
++# Only expand once:
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
++$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
++ # Check whether --enable-maintainer-mode was given.
++if test "${enable_maintainer_mode+set}" = set; then :
++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
++else
++ USE_MAINTAINER_MODE=no
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
++$as_echo "$USE_MAINTAINER_MODE" >&6; }
++ if test $USE_MAINTAINER_MODE = yes; then
++ MAINTAINER_MODE_TRUE=
++ MAINTAINER_MODE_FALSE='#'
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ MAINTAINER_MODE_TRUE='#'
++ MAINTAINER_MODE_FALSE=
++fi
+
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (short))) < 0)];
+-test_array [0] = 0
++ MAINT=$MAINTAINER_MODE_TRUE
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=-1 ac_mid=-1
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (short))) >= $ac_mid)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for some Win32 platform" >&5
++$as_echo_n "checking for some Win32 platform... " >&6; }
++case "$host" in
++ *-*-mingw*|*-*-cygwin*)
++ platform_win32=yes
++ ;;
++ *)
++ platform_win32=no
++ ;;
+ esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=$ac_mid; break
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $platform_win32" >&5
++$as_echo "$platform_win32" >&6; }
++ if test "$platform_win32" = "yes"; then
++ PLATFORM_WIN32_TRUE=
++ PLATFORM_WIN32_FALSE='#'
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ PLATFORM_WIN32_TRUE='#'
++ PLATFORM_WIN32_FALSE=
++fi
+
+- ac_hi=`expr '(' $ac_mid ')' - 1`
+- if test $ac_mid -le $ac_hi; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid`
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for native Win32" >&5
++$as_echo_n "checking for native Win32... " >&6; }
++case "$host" in
++ *-*-mingw*)
++ os_win32=yes
++ ;;
++ *)
++ os_win32=no
++ ;;
++esac
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $os_win32" >&5
++$as_echo "$os_win32" >&6; }
++ if test "$os_win32" = "yes"; then
++ OS_WIN32_TRUE=
++ OS_WIN32_FALSE='#'
++else
++ OS_WIN32_TRUE='#'
++ OS_WIN32_FALSE=
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
++
++if test "$os_win32" = "yes"; then
++ # Extract the first word of "lib.exe", so it can be a program name with args.
++set dummy lib.exe; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ms_librarian+set}" = set; then :
++ $as_echo_n "(cached) " >&6
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ if test -n "$ms_librarian"; then
++ ac_cv_prog_ms_librarian="$ms_librarian" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ms_librarian="yes"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
+
+- ac_lo= ac_hi=
++ test -z "$ac_cv_prog_ms_librarian" && ac_cv_prog_ms_librarian="no"
+ fi
+-
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++ms_librarian=$ac_cv_prog_ms_librarian
++if test -n "$ms_librarian"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ms_librarian" >&5
++$as_echo "$ms_librarian" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-# Binary search between lo and hi bounds.
+-while test "x$ac_lo" != "x$ac_hi"; do
+- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (short))) <= $ac_mid)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid
++fi
++ if test x$ms_librarian = xyes; then
++ MS_LIB_AVAILABLE_TRUE=
++ MS_LIB_AVAILABLE_FALSE='#'
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ MS_LIB_AVAILABLE_TRUE='#'
++ MS_LIB_AVAILABLE_FALSE=
++fi
++
++
++if test "x$GCC" = "xyes"; then
++ case " $CFLAGS " in
++ *[\ \ ]-Wall[\ \ ]*) ;;
++ *) CFLAGS="$CFLAGS -Wall" ;;
++ esac
++
++ case " $CFLAGS " in
++ *[\ \ ]-Wmissing-prototypes[\ \ ]*) ;;
++ *) CFLAGS="$CFLAGS -Wmissing-prototypes" ;;
++ esac
++
++ if test "x$enable_ansi" = "xyes"; then
++ case " $CFLAGS " in
++ *[\ \ ]-ansi[\ \ ]*) ;;
++ *) CFLAGS="$CFLAGS -ansi" ;;
++ esac
+
+- ac_lo=`expr '(' $ac_mid ')' + 1`
++ case " $CFLAGS " in
++ *[\ \ ]-pedantic[\ \ ]*) ;;
++ *) CFLAGS="$CFLAGS -pedantic" ;;
++ esac
++ fi
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-done
+-case $ac_lo in
+-?*) ac_cv_sizeof_short=$ac_lo;;
+-'') if test "$ac_cv_type_short" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (short)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (short)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
+- else
+- ac_cv_sizeof_short=0
+- fi ;;
+-esac
++# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
++# for constant arguments. Useless!
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
++$as_echo_n "checking for working alloca.h... " >&6; }
++if test "${ac_cv_working_alloca_h+set}" = set; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
+-static long int longval () { return (long int) (sizeof (short)); }
+-static unsigned long int ulongval () { return (long int) (sizeof (short)); }
+-#include <stdio.h>
+-#include <stdlib.h>
++#include <alloca.h>
+ int
+ main ()
+ {
+-
+- FILE *f = fopen ("conftest.val", "w");
+- if (! f)
+- return 1;
+- if (((long int) (sizeof (short))) < 0)
+- {
+- long int i = longval ();
+- if (i != ((long int) (sizeof (short))))
+- return 1;
+- fprintf (f, "%ld", i);
+- }
+- else
+- {
+- unsigned long int i = ulongval ();
+- if (i != ((long int) (sizeof (short))))
+- return 1;
+- fprintf (f, "%lu", i);
+- }
+- /* Do not output a trailing newline, as this causes \r\n confusion
+- on some platforms. */
+- return ferror (f) || fclose (f) != 0;
+-
++char *p = (char *) alloca (2 * sizeof (int));
++ if (p) return 0;
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_sizeof_short=`cat conftest.val`
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_working_alloca_h=yes
+ else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-( exit $ac_status )
+-if test "$ac_cv_type_short" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (short)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (short)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
+- else
+- ac_cv_sizeof_short=0
+- fi
++ ac_cv_working_alloca_h=no
+ fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+-fi
+-rm -f conftest.val
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5
+-$as_echo "$ac_cv_sizeof_short" >&6; }
+-
+-
+-
+-cat >>confdefs.h <<_ACEOF
+-#define SIZEOF_SHORT $ac_cv_sizeof_short
+-_ACEOF
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
++$as_echo "$ac_cv_working_alloca_h" >&6; }
++if test $ac_cv_working_alloca_h = yes; then
+
++$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+-ART_SIZEOF_SHORT=$ac_cv_sizeof_short
++fi
+
+-# The cast to long int works around a bug in the HP C Compiler
+-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+-# This bug is HP SR number 8606223364.
+-{ $as_echo "$as_me:$LINENO: checking size of int" >&5
+-$as_echo_n "checking size of int... " >&6; }
+-if test "${ac_cv_sizeof_int+set}" = set; then
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
++$as_echo_n "checking for alloca... " >&6; }
++if test "${ac_cv_func_alloca_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+ else
+- if test "$cross_compiling" = yes; then
+- # Depending upon the size, compute the lo and hi bounds.
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
++#ifdef __GNUC__
++# define alloca __builtin_alloca
++#else
++# ifdef _MSC_VER
++# include <malloc.h>
++# define alloca _alloca
++# else
++# ifdef HAVE_ALLOCA_H
++# include <alloca.h>
++# else
++# ifdef _AIX
++ #pragma alloca
++# else
++# ifndef alloca /* predefined by HP cc +Olibcalls */
++char *alloca ();
++# endif
++# endif
++# endif
++# endif
++#endif
++
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (int))) >= 0)];
+-test_array [0] = 0
+-
++char *p = (char *) alloca (1);
++ if (p) return 0;
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=0 ac_mid=0
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_func_alloca_works=yes
++else
++ ac_cv_func_alloca_works=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
++$as_echo "$ac_cv_func_alloca_works" >&6; }
++
++if test $ac_cv_func_alloca_works = yes; then
++
++$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
++
++else
++ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
++# that cause trouble. Some versions do not even contain alloca or
++# contain a buggy version. If you still want to use their alloca,
++# use ar to extract alloca.o from them instead of compiling alloca.c.
++
++ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
++
++$as_echo "#define C_ALLOCA 1" >>confdefs.h
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
++$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
++if test "${ac_cv_os_cray+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (int))) <= $ac_mid)];
+-test_array [0] = 0
++#if defined CRAY && ! defined CRAY2
++webecray
++#else
++wenotbecray
++#endif
+
+- ;
+- return 0;
+-}
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid; break
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "webecray" >/dev/null 2>&1; then :
++ ac_cv_os_cray=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ ac_cv_os_cray=no
++fi
++rm -f conftest*
+
+- ac_lo=`expr $ac_mid + 1`
+- if test $ac_lo -le $ac_mid; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid + 1`
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
++$as_echo "$ac_cv_os_cray" >&6; }
++if test $ac_cv_os_cray = yes; then
++ for ac_func in _getb67 GETB67 getb67; do
++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
++eval as_val=\$$as_ac_var
++ if test "x$as_val" = x""yes; then :
++
++cat >>confdefs.h <<_ACEOF
++#define CRAY_STACKSEG_END $ac_func
++_ACEOF
++
++ break
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++fi
+
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
++$as_echo_n "checking stack direction for C alloca... " >&6; }
++if test "${ac_cv_c_stack_direction+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test "$cross_compiling" = yes; then :
++ ac_cv_c_stack_direction=0
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ $ac_includes_default
+ int
+-main ()
++find_stack_direction ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (int))) < 0)];
+-test_array [0] = 0
+-
+- ;
+- return 0;
++ static char *addr = 0;
++ auto char dummy;
++ if (addr == 0)
++ {
++ addr = &dummy;
++ return find_stack_direction ();
++ }
++ else
++ return (&dummy > addr) ? 1 : -1;
+ }
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=-1 ac_mid=-1
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
++
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (int))) >= $ac_mid)];
+-test_array [0] = 0
+-
+- ;
+- return 0;
++ return find_stack_direction () < 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=$ac_mid; break
++if ac_fn_c_try_run "$LINENO"; then :
++ ac_cv_c_stack_direction=1
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ ac_cv_c_stack_direction=-1
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++fi
+
+- ac_hi=`expr '(' $ac_mid ')' - 1`
+- if test $ac_mid -le $ac_hi; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid`
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
++$as_echo "$ac_cv_c_stack_direction" >&6; }
++cat >>confdefs.h <<_ACEOF
++#define STACK_DIRECTION $ac_cv_c_stack_direction
++_ACEOF
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_lo= ac_hi=
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-# Binary search between lo and hi bounds.
+-while test "x$ac_lo" != "x$ac_hi"; do
+- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
++$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
++if test "${ac_cv_c_bigendian+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_cv_c_bigendian=unknown
++ # See if we're dealing with a universal compiler.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifndef __APPLE_CC__
++ not a universal capable compiler
++ #endif
++ typedef int dummy;
++
+ _ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++
++ # Check for potential -arch flags. It is not universal unless
++ # there are at least two -arch flags with different values.
++ ac_arch=
++ ac_prev=
++ for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
++ if test -n "$ac_prev"; then
++ case $ac_word in
++ i?86 | x86_64 | ppc | ppc64)
++ if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
++ ac_arch=$ac_word
++ else
++ ac_cv_c_bigendian=universal
++ break
++ fi
++ ;;
++ esac
++ ac_prev=
++ elif test "x$ac_word" = "x-arch"; then
++ ac_prev=arch
++ fi
++ done
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ if test $ac_cv_c_bigendian = unknown; then
++ # See if sys/param.h defines the BYTE_ORDER macro.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
++#include <sys/types.h>
++ #include <sys/param.h>
++
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (int))) <= $ac_mid)];
+-test_array [0] = 0
++#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
++ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
++ && LITTLE_ENDIAN)
++ bogus endian macros
++ #endif
+
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_lo=`expr '(' $ac_mid ')' + 1`
+-fi
+-
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-done
+-case $ac_lo in
+-?*) ac_cv_sizeof_int=$ac_lo;;
+-'') if test "$ac_cv_type_int" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (int)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (int)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
+- else
+- ac_cv_sizeof_int=0
+- fi ;;
+-esac
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ # It does; now see whether it defined to BIG_ENDIAN or not.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
+-static long int longval () { return (long int) (sizeof (int)); }
+-static unsigned long int ulongval () { return (long int) (sizeof (int)); }
+-#include <stdio.h>
+-#include <stdlib.h>
++#include <sys/types.h>
++ #include <sys/param.h>
++
+ int
+ main ()
+ {
+-
+- FILE *f = fopen ("conftest.val", "w");
+- if (! f)
+- return 1;
+- if (((long int) (sizeof (int))) < 0)
+- {
+- long int i = longval ();
+- if (i != ((long int) (sizeof (int))))
+- return 1;
+- fprintf (f, "%ld", i);
+- }
+- else
+- {
+- unsigned long int i = ulongval ();
+- if (i != ((long int) (sizeof (int))))
+- return 1;
+- fprintf (f, "%lu", i);
+- }
+- /* Do not output a trailing newline, as this causes \r\n confusion
+- on some platforms. */
+- return ferror (f) || fclose (f) != 0;
++#if BYTE_ORDER != BIG_ENDIAN
++ not big endian
++ #endif
+
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_sizeof_int=`cat conftest.val`
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_c_bigendian=yes
+ else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-( exit $ac_status )
+-if test "$ac_cv_type_int" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (int)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (int)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
+- else
+- ac_cv_sizeof_int=0
+- fi
+-fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++ ac_cv_c_bigendian=no
+ fi
+-rm -f conftest.val
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
+-$as_echo "$ac_cv_sizeof_int" >&6; }
+-
+-
+-
+-cat >>confdefs.h <<_ACEOF
+-#define SIZEOF_INT $ac_cv_sizeof_int
+-_ACEOF
+-
+-
+-ART_SIZEOF_INT=$ac_cv_sizeof_int
+-
+-# The cast to long int works around a bug in the HP C Compiler
+-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+-# This bug is HP SR number 8606223364.
+-{ $as_echo "$as_me:$LINENO: checking size of long" >&5
+-$as_echo_n "checking size of long... " >&6; }
+-if test "${ac_cv_sizeof_long+set}" = set; then
+- $as_echo_n "(cached) " >&6
+-else
+- if test "$cross_compiling" = yes; then
+- # Depending upon the size, compute the lo and hi bounds.
+-cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ fi
++ if test $ac_cv_c_bigendian = unknown; then
++ # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
++#include <limits.h>
++
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (long))) >= 0)];
+-test_array [0] = 0
++#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
++ bogus endian macros
++ #endif
+
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=0 ac_mid=0
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ # It does; now see whether it defined to _BIG_ENDIAN or not.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
++#include <limits.h>
++
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (long))) <= $ac_mid)];
+-test_array [0] = 0
++#ifndef _BIG_ENDIAN
++ not big endian
++ #endif
+
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid; break
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_c_bigendian=yes
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- ac_lo=`expr $ac_mid + 1`
+- if test $ac_lo -le $ac_mid; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid + 1`
++ ac_cv_c_bigendian=no
+ fi
+-
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ fi
++ if test $ac_cv_c_bigendian = unknown; then
++ # Compile a test program.
++ if test "$cross_compiling" = yes; then :
++ # Try to guess by grepping values from an object file.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-$ac_includes_default
++short int ascii_mm[] =
++ { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
++ short int ascii_ii[] =
++ { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
++ int use_ascii (int i) {
++ return ascii_mm[i] + ascii_ii[i];
++ }
++ short int ebcdic_ii[] =
++ { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
++ short int ebcdic_mm[] =
++ { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
++ int use_ebcdic (int i) {
++ return ebcdic_mm[i] + ebcdic_ii[i];
++ }
++ extern int foo;
++
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (long))) < 0)];
+-test_array [0] = 0
+-
++return use_ascii (foo) == use_ebcdic (foo);
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=-1 ac_mid=-1
+- while :; do
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
++ ac_cv_c_bigendian=yes
++ fi
++ if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
++ if test "$ac_cv_c_bigendian" = unknown; then
++ ac_cv_c_bigendian=no
++ else
++ # finding both strings is unlikely to happen, but who knows?
++ ac_cv_c_bigendian=unknown
++ fi
++ fi
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ $ac_includes_default
+ int
+ main ()
+ {
+-static int test_array [1 - 2 * !(((long int) (sizeof (long))) >= $ac_mid)];
+-test_array [0] = 0
++
++ /* Are we little or big endian? From Harbison&Steele. */
++ union
++ {
++ long int l;
++ char c[sizeof (long int)];
++ } u;
++ u.l = 1;
++ return u.c[sizeof (long int) - 1] == 1;
+
+ ;
+ return 0;
+ }
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_lo=$ac_mid; break
++if ac_fn_c_try_run "$LINENO"; then :
++ ac_cv_c_bigendian=no
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ ac_cv_c_bigendian=yes
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++fi
+
+- ac_hi=`expr '(' $ac_mid ')' - 1`
+- if test $ac_mid -le $ac_hi; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid`
++ fi
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
++$as_echo "$ac_cv_c_bigendian" >&6; }
++ case $ac_cv_c_bigendian in #(
++ yes)
++ $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
++;; #(
++ no)
++ ;; #(
++ universal)
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+- done
++$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
++
++ ;; #(
++ *)
++ as_fn_error "unknown endianness
++ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
++ esac
++
++
++# The cast to long int works around a bug in the HP C Compiler
++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
++# This bug is HP SR number 8606223364.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char" >&5
++$as_echo_n "checking size of char... " >&6; }
++if test "${ac_cv_sizeof_char+set}" = set; then :
++ $as_echo_n "(cached) " >&6
+ else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (char))" "ac_cv_sizeof_char" "$ac_includes_default"; then :
+
+- ac_lo= ac_hi=
++else
++ if test "$ac_cv_type_char" = yes; then
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ as_fn_set_status 77
++as_fn_error "cannot compute sizeof (char)
++See \`config.log' for more details." "$LINENO" 5; }; }
++ else
++ ac_cv_sizeof_char=0
++ fi
+ fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char" >&5
++$as_echo "$ac_cv_sizeof_char" >&6; }
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-# Binary search between lo and hi bounds.
+-while test "x$ac_lo" != "x$ac_hi"; do
+- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-int
+-main ()
+-{
+-static int test_array [1 - 2 * !(((long int) (sizeof (long))) <= $ac_mid)];
+-test_array [0] = 0
+
+- ;
+- return 0;
+-}
++
++cat >>confdefs.h <<_ACEOF
++#define SIZEOF_CHAR $ac_cv_sizeof_char
+ _ACEOF
+-rm -f conftest.$ac_objext
+-if { (ac_try="$ac_compile"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_compile") 2>conftest.er1
+- ac_status=$?
+- grep -v '^ *+' conftest.er1 >conftest.err
+- rm -f conftest.er1
+- cat conftest.err >&5
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && {
+- test -z "$ac_c_werror_flag" ||
+- test ! -s conftest.err
+- } && test -s conftest.$ac_objext; then
+- ac_hi=$ac_mid
+-else
+- $as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+
+- ac_lo=`expr '(' $ac_mid ')' + 1`
+-fi
+
+-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+-done
+-case $ac_lo in
+-?*) ac_cv_sizeof_long=$ac_lo;;
+-'') if test "$ac_cv_type_long" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++ART_SIZEOF_CHAR=$ac_cv_sizeof_char
++
++# The cast to long int works around a bug in the HP C Compiler
++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
++# This bug is HP SR number 8606223364.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5
++$as_echo_n "checking size of short... " >&6; }
++if test "${ac_cv_sizeof_short+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short" "$ac_includes_default"; then :
++
++else
++ if test "$ac_cv_type_short" = yes; then
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (long)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
++{ as_fn_set_status 77
++as_fn_error "cannot compute sizeof (short)
++See \`config.log' for more details." "$LINENO" 5; }; }
+ else
+- ac_cv_sizeof_long=0
+- fi ;;
+-esac
+-else
+- cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h. */
++ ac_cv_sizeof_short=0
++ fi
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5
++$as_echo "$ac_cv_sizeof_short" >&6; }
++
++
++
++cat >>confdefs.h <<_ACEOF
++#define SIZEOF_SHORT $ac_cv_sizeof_short
+ _ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h. */
+-$ac_includes_default
+-static long int longval () { return (long int) (sizeof (long)); }
+-static unsigned long int ulongval () { return (long int) (sizeof (long)); }
+-#include <stdio.h>
+-#include <stdlib.h>
+-int
+-main ()
+-{
+
+- FILE *f = fopen ("conftest.val", "w");
+- if (! f)
+- return 1;
+- if (((long int) (sizeof (long))) < 0)
+- {
+- long int i = longval ();
+- if (i != ((long int) (sizeof (long))))
+- return 1;
+- fprintf (f, "%ld", i);
+- }
+- else
+- {
+- unsigned long int i = ulongval ();
+- if (i != ((long int) (sizeof (long))))
+- return 1;
+- fprintf (f, "%lu", i);
+- }
+- /* Do not output a trailing newline, as this causes \r\n confusion
+- on some platforms. */
+- return ferror (f) || fclose (f) != 0;
+
+- ;
+- return 0;
+-}
++ART_SIZEOF_SHORT=$ac_cv_sizeof_short
++
++# The cast to long int works around a bug in the HP C Compiler
++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
++# This bug is HP SR number 8606223364.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
++$as_echo_n "checking size of int... " >&6; }
++if test "${ac_cv_sizeof_int+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then :
++
++else
++ if test "$ac_cv_type_int" = yes; then
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++{ as_fn_set_status 77
++as_fn_error "cannot compute sizeof (int)
++See \`config.log' for more details." "$LINENO" 5; }; }
++ else
++ ac_cv_sizeof_int=0
++ fi
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5
++$as_echo "$ac_cv_sizeof_int" >&6; }
++
++
++
++cat >>confdefs.h <<_ACEOF
++#define SIZEOF_INT $ac_cv_sizeof_int
+ _ACEOF
+-rm -f conftest$ac_exeext
+-if { (ac_try="$ac_link"
+-case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_link") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+- { (case "(($ac_try" in
+- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+- *) ac_try_echo=$ac_try;;
+-esac
+-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+-$as_echo "$ac_try_echo") >&5
+- (eval "$ac_try") 2>&5
+- ac_status=$?
+- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_sizeof_long=`cat conftest.val`
++
++
++ART_SIZEOF_INT=$ac_cv_sizeof_int
++
++# The cast to long int works around a bug in the HP C Compiler
++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
++# This bug is HP SR number 8606223364.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
++$as_echo_n "checking size of long... " >&6; }
++if test "${ac_cv_sizeof_long+set}" = set; then :
++ $as_echo_n "(cached) " >&6
+ else
+- $as_echo "$as_me: program exited with status $ac_status" >&5
+-$as_echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then :
+
+-( exit $ac_status )
+-if test "$ac_cv_type_long" = yes; then
+- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++else
++ if test "$ac_cv_type_long" = yes; then
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long)
+-See \`config.log' for more details." >&5
+-$as_echo "$as_me: error: cannot compute sizeof (long)
+-See \`config.log' for more details." >&2;}
+- { (exit 77); exit 77; }; }; }
++{ as_fn_set_status 77
++as_fn_error "cannot compute sizeof (long)
++See \`config.log' for more details." "$LINENO" 5; }; }
+ else
+ ac_cv_sizeof_long=0
+ fi
+ fi
+-rm -rf conftest.dSYM
+-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+-fi
+-rm -f conftest.val
++
+ fi
+-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
+ $as_echo "$ac_cv_sizeof_long" >&6; }
+
+
+@@ -13804,13 +11577,13 @@
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+- *) $as_unset $ac_var ;;
++ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+@@ -13818,8 +11591,8 @@
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+- # `set' does not quote correctly, so add quotes (double-quote
+- # substitution turns \\\\ into \\, and sed turns \\ into \).
++ # `set' does not quote correctly, so add quotes: double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+@@ -13842,11 +11615,11 @@
+ if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+ $as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+ $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
- rm -f "$tmp/out12"
- # Compute $ac_file's index in $config_headers.
-+_am_arg=$ac_file
- _am_stamp_count=1
- for _am_header in $config_headers :; do
- case $_am_header in
-- $ac_file | $ac_file:* )
-+ $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ fi
+@@ -13866,8 +11639,8 @@
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+ done
+ LIBOBJS=$ac_libobjs
+
+@@ -13883,46 +11656,28 @@
+ fi
+
+ if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${PLATFORM_WIN32_TRUE}" && test -z "${PLATFORM_WIN32_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"PLATFORM_WIN32\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"PLATFORM_WIN32\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "conditional \"PLATFORM_WIN32\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${OS_WIN32_TRUE}" && test -z "${OS_WIN32_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"OS_WIN32\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"OS_WIN32\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "conditional \"OS_WIN32\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+ if test -z "${MS_LIB_AVAILABLE_TRUE}" && test -z "${MS_LIB_AVAILABLE_FALSE}"; then
+- { { $as_echo "$as_me:$LINENO: error: conditional \"MS_LIB_AVAILABLE\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&5
+-$as_echo "$as_me: error: conditional \"MS_LIB_AVAILABLE\" was never defined.
+-Usually this means the macro was only invoked conditionally." >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "conditional \"MS_LIB_AVAILABLE\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
+ fi
+
+
+@@ -13930,9 +11685,10 @@
+ ac_write_fail=0
+ ac_clean_files_save=$ac_clean_files
+ ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+ $as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++as_write_fail=0
++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+ #! $SHELL
+ # Generated by $as_me.
+ # Run this file to recreate the current configuration.
+@@ -13942,17 +11698,18 @@
+ debug=false
+ ac_cs_recheck=false
+ ac_cs_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_ACEOF
+
+-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+-## --------------------- ##
+-## M4sh Initialization. ##
+-## --------------------- ##
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
++## -------------------- ##
++## M4sh Initialization. ##
++## -------------------- ##
+
+ # Be more Bourne compatible
+ DUALCASE=1; export DUALCASE # for MKS sh
+-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+@@ -13960,23 +11717,15 @@
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+ else
+- case `(set -o) 2>/dev/null` in
+- *posix*) set -o posix ;;
++ case `(set -o) 2>/dev/null` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
+ esac
+-
+ fi
+
+
+-
+-
+-# PATH needs CR
+-# Avoid depending upon Character Ranges.
+-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+-as_cr_digits='0123456789'
+-as_cr_alnum=$as_cr_Letters$as_cr_digits
+-
+ as_nl='
+ '
+ export as_nl
+@@ -13984,7 +11733,13 @@
+ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+ as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++# Prefer a ksh shell builtin over an external printf program on Solaris,
++# but without wasting forks for bash or zsh.
++if test -z "$BASH_VERSION$ZSH_VERSION" \
++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='print -r --'
++ as_echo_n='print -rn --'
++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+ else
+@@ -13995,7 +11750,7 @@
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+- case $arg in
++ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+@@ -14018,13 +11773,6 @@
+ }
+ fi
+
+-# Support unset when possible.
+-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+- as_unset=unset
+-else
+- as_unset=false
+-fi
+-
+
+ # IFS
+ # We need space, tab and new line, in precisely that order. Quoting is
+@@ -14034,15 +11782,15 @@
+ IFS=" "" $as_nl"
+
+ # Find who we are. Look in the path if we contain no directory separator.
+-case $0 in
++case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ for as_dir in $PATH
+ do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+-done
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++ done
+ IFS=$as_save_IFS
+
+ ;;
+@@ -14054,12 +11802,16 @@
+ fi
+ if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+- { (exit 1); exit 1; }
++ exit 1
+ fi
+
+-# Work around bugs in pre-3.0 UWIN ksh.
+-for as_var in ENV MAIL MAILPATH
+-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++# Unset variables that we do not need and which cause bugs (e.g. in
++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
++# suppresses any "Segmentation fault" message there. '((' could
++# trigger a bug in pdksh 5.2.14.
++for as_var in BASH_ENV ENV MAIL MAILPATH
++do eval test x\${$as_var+set} = xset \
++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+ done
+ PS1='$ '
+ PS2='> '
+@@ -14071,7 +11823,89 @@
+ LANGUAGE=C
+ export LANGUAGE
+
+-# Required to use basename.
++# CDPATH.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++
++# as_fn_error ERROR [LINENO LOG_FD]
++# ---------------------------------
++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
++# script with status $?, using 1 if that was 0.
++as_fn_error ()
++{
++ as_status=$?; test $as_status -eq 0 && as_status=1
++ if test "$3"; then
++ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
++ fi
++ $as_echo "$as_me: error: $1" >&2
++ as_fn_exit $as_status
++} # as_fn_error
++
++
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
++
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++
++# as_fn_unset VAR
++# ---------------
++# Portably unset VAR.
++as_fn_unset ()
++{
++ { eval $1=; unset $1;}
++}
++as_unset=as_fn_unset
++# as_fn_append VAR VALUE
++# ----------------------
++# Append the text in VALUE to the end of the definition contained in VAR. Take
++# advantage of any shell optimizations that allow amortized linear growth over
++# repeated appends, instead of the typical quadratic growth present in naive
++# implementations.
++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
++ eval 'as_fn_append ()
++ {
++ eval $1+=\$2
++ }'
++else
++ as_fn_append ()
++ {
++ eval $1=\$$1\$2
++ }
++fi # as_fn_append
++
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
++else
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
++
++
+ if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+@@ -14085,8 +11919,12 @@
+ as_basename=false
+ fi
+
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
+
+-# Name of the executable.
+ as_me=`$as_basename -- "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+@@ -14106,76 +11944,25 @@
+ }
+ s/.*/./; q'`
+
+-# CDPATH.
+-$as_unset CDPATH
+-
+-
+-
+- as_lineno_1=$LINENO
+- as_lineno_2=$LINENO
+- test "x$as_lineno_1" != "x$as_lineno_2" &&
+- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+-
+- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+- # uniformly replaced by the line number. The first 'sed' inserts a
+- # line-number line after each line using $LINENO; the second 'sed'
+- # does the real work. The second script uses 'N' to pair each
+- # line-number line with the line containing $LINENO, and appends
+- # trailing '-' during substitution so that $LINENO is not a special
+- # case at line end.
+- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+- # scripts with optimization help from Paolo Bonzini. Blame Lee
+- # E. McMahon (1931-1989) for sed's syntax. :-)
+- sed -n '
+- p
+- /[$]LINENO/=
+- ' <$as_myself |
+- sed '
+- s/[$]LINENO.*/&-/
+- t lineno
+- b
+- :lineno
+- N
+- :loop
+- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+- t loop
+- s/-\n.*//
+- ' >$as_me.lineno &&
+- chmod +x "$as_me.lineno" ||
+- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+- { (exit 1); exit 1; }; }
+-
+- # Don't try to exec as it changes $[0], causing all sort of problems
+- # (the dirname of $[0] is not the place where we might find the
+- # original and so on. Autoconf is especially sensitive to this).
+- . "./$as_me.lineno"
+- # Exit status is that of the last command.
+- exit
+-}
+-
+-
+-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+- as_dirname=dirname
+-else
+- as_dirname=false
+-fi
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ ECHO_C= ECHO_N= ECHO_T=
+-case `echo -n x` in
++case `echo -n x` in #(((((
+ -n*)
+- case `echo 'x\c'` in
++ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+- *) ECHO_C='\c';;
++ xy) ECHO_C='\c';;
++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
++ ECHO_T=' ';;
+ esac;;
+ *)
+ ECHO_N='-n';;
+ esac
+-if expr a : '\(a\)' >/dev/null 2>&1 &&
+- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+- as_expr=expr
+-else
+- as_expr=false
+-fi
+
+ rm -f conf$$ conf$$.exe conf$$.file
+ if test -d conf$$.dir; then
+@@ -14204,8 +11991,56 @@
+ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+ rmdir conf$$.dir 2>/dev/null
+
++
++# as_fn_mkdir_p
++# -------------
++# Create "$as_dir" as a directory, including parents if necessary.
++as_fn_mkdir_p ()
++{
++
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
++ esac
++ test -d "$as_dir" || eval $as_mkdir_p || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
++
++
++} # as_fn_mkdir_p
+ if mkdir -p . 2>/dev/null; then
+- as_mkdir_p=:
++ as_mkdir_p='mkdir -p "$as_dir"'
+ else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+@@ -14224,10 +12059,10 @@
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+- case $1 in
++ case $1 in #(
+ -*)set "./$1";;
+ esac;
+- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+@@ -14242,13 +12077,19 @@
+
+
+ exec 6>&1
++## ----------------------------------- ##
++## Main body of $CONFIG_STATUS script. ##
++## ----------------------------------- ##
++_ASEOF
++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+-# Save the log message, to keep $[0] and so on meaningful, and to
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# Save the log message, to keep $0 and so on meaningful, and to
+ # report actual input values of CONFIG_FILES etc. instead of their
+ # values after options handling.
+ ac_log="
+ This file was extended by libart-lgpl $as_me 2.3.21, which was
+-generated by GNU Autoconf 2.63. Invocation command line was
++generated by GNU Autoconf 2.65. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+@@ -14280,13 +12121,15 @@
+
+ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ ac_cs_usage="\
+-\`$as_me' instantiates files from templates according to the
+-current configuration.
++\`$as_me' instantiates files and other configuration actions
++from templates according to the current configuration. Unless the files
++and actions are specified as TAGs, all are instantiated by default.
+
+-Usage: $0 [OPTION]... [FILE]...
++Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
++ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+@@ -14305,16 +12148,17 @@
+ Configuration commands:
+ $config_commands
+
+-Report bugs to <bug-autoconf at gnu.org>."
++Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=libart>."
+
+ _ACEOF
+ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ ac_cs_version="\\
+ libart-lgpl config.status 2.3.21
+-configured by $0, generated by GNU Autoconf 2.63,
+- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
++configured by $0, generated by GNU Autoconf 2.65,
++ with options \\"\$ac_cs_config\\"
+
+-Copyright (C) 2008 Free Software Foundation, Inc.
++Copyright (C) 2009 Free Software Foundation, Inc.
+ This config.status script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it."
+
+@@ -14350,6 +12194,8 @@
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
++ --config | --confi | --conf | --con | --co | --c )
++ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+@@ -14357,20 +12203,19 @@
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
++ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+- CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
++ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+- { $as_echo "$as_me: error: ambiguous option: $1
+-Try \`$0 --help' for more information." >&2
+- { (exit 1); exit 1; }; };;
++ as_fn_error "ambiguous option: \`$1'
++Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+@@ -14378,11 +12223,10 @@
+ ac_cs_silent=: ;;
+
+ # This is an error.
+- -*) { $as_echo "$as_me: error: unrecognized option: $1
+-Try \`$0 --help' for more information." >&2
+- { (exit 1); exit 1; }; } ;;
++ -*) as_fn_error "unrecognized option: \`$1'
++Try \`$0 --help' for more information." ;;
+
+- *) ac_config_targets="$ac_config_targets $1"
++ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+@@ -14700,9 +12544,7 @@
+ "libart-config") CONFIG_FILES="$CONFIG_FILES libart-config" ;;
+ "gen_art_config.sh") CONFIG_FILES="$CONFIG_FILES gen_art_config.sh" ;;
+
+- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+- { (exit 1); exit 1; }; };;
++ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
--echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
--$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X$ac_file : 'X\(//\)[^/]' \| \
-- X$ac_file : 'X\(//\)$' \| \
-- X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
--echo X$ac_file |
-+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$_am_arg" : 'X\(//\)[^/]' \| \
-+ X"$_am_arg" : 'X\(//\)$' \| \
-+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$_am_arg" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
+
+@@ -14729,7 +12571,7 @@
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ ' 0
+- trap '{ (exit 1); exit 1; }' 1 2 13 15
++ trap 'as_fn_exit 1' 1 2 13 15
+ }
+ # Create a (secure) tmp directory for tmp files.
+
+@@ -14740,11 +12582,7 @@
+ {
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+-} ||
+-{
+- $as_echo "$as_me: cannot create a temporary directory in ." >&2
+- { (exit 1); exit 1; }
+-}
++} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+ # Set up the scripts for CONFIG_FILES section.
+ # No need to generate them if there are no CONFIG_FILES.
+@@ -14752,10 +12590,16 @@
+ if test -n "$CONFIG_FILES"; then
+
+
+-ac_cr='
'
++ac_cr=`echo X | tr X '\015'`
++# On cygwin, bash can eat \r inside `` if the user requested igncr.
++# But we know of no other shell where ac_cr would be empty at this
++# point, so we can use a bashism as a fallback.
++if test "x$ac_cr" = x; then
++ eval ac_cr=\$\'\\r\'
++fi
+ ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+ if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+- ac_cs_awk_cr='\\r'
++ ac_cs_awk_cr='\r'
+ else
+ ac_cs_awk_cr=$ac_cr
+ fi
+@@ -14769,24 +12613,18 @@
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+ } >conf$$subs.sh ||
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ ac_delim='%!_!# '
+ for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+@@ -14808,7 +12646,7 @@
+ t delim
+ :nl
+ h
+-s/\(.\{148\}\).*/\1/
++s/\(.\{148\}\)..*/\1/
+ t more1
+ s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+ p
+@@ -14822,7 +12660,7 @@
+ t nl
+ :delim
+ h
+-s/\(.\{148\}\).*/\1/
++s/\(.\{148\}\)..*/\1/
+ t more2
+ s/["\\]/\\&/g; s/^/"/; s/$/"/
+ p
+@@ -14875,9 +12713,7 @@
+ else
+ cat
+ fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+- { (exit 1); exit 1; }; }
++ || as_fn_error "could not setup config files machinery" "$LINENO" 5
+ _ACEOF
+
+ # VPATH may cause trouble with some makes, so we remove $(srcdir),
+@@ -14918,9 +12754,7 @@
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
+-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+@@ -15005,9 +12839,7 @@
+ _ACAWK
+ _ACEOF
+ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+- { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
+-$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "could not setup config headers machinery" "$LINENO" 5
+ fi # test -n "$CONFIG_HEADERS"
+
+
+@@ -15020,9 +12852,7 @@
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+- { (exit 1); exit 1; }; };;
++ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+@@ -15050,12 +12880,10 @@
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+- { (exit 1); exit 1; }; };;
++ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+- ac_file_inputs="$ac_file_inputs '$ac_f'"
++ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+@@ -15066,7 +12894,7 @@
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+ $as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+@@ -15079,9 +12907,7 @@
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; } ;;
++ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+@@ -15109,47 +12935,7 @@
q
-@@ -21708,7 +21754,7 @@
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
-- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
-+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
- $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
-diff -x'*config.sub' -x'*config.guess' -Naur libart-lgpl-2.3.20.old/ltmain.sh libart-lgpl-2.3.20/ltmain.sh
---- libart-lgpl-2.3.20.old/ltmain.sh 2007-08-29 13:52:51.000000000 +0200
-+++ libart-lgpl-2.3.20/ltmain.sh 2007-11-27 22:23:09.000000000 +0100
-@@ -43,7 +43,7 @@
+ }
+ s/.*/./; q'`
+- { as_dir="$ac_dir"
+- case $as_dir in #(
+- -*) as_dir=./$as_dir;;
+- esac
+- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+- as_dirs=
+- while :; do
+- case $as_dir in #(
+- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+- *) as_qdir=$as_dir;;
+- esac
+- as_dirs="'$as_qdir' $as_dirs"
+- as_dir=`$as_dirname -- "$as_dir" ||
+-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$as_dir" : 'X\(//\)[^/]' \| \
+- X"$as_dir" : 'X\(//\)$' \| \
+- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$as_dir" |
+- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+- s//\1/
+- q
+- }
+- /^X\(\/\/\)[^/].*/{
+- s//\1/
+- q
+- }
+- /^X\(\/\/\)$/{
+- s//\1/
+- q
+- }
+- /^X\(\/\).*/{
+- s//\1/
+- q
+- }
+- s/.*/./; q'`
+- test -d "$as_dir" && break
+- done
+- test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+- { (exit 1); exit 1; }; }; }
++ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+ case "$ac_dir" in
+@@ -15206,7 +12992,6 @@
+ # If the template does not know about datarootdir, expand it.
+ # FIXME: This hack should be removed a few years after 2.60.
+ ac_datarootdir_hack=; ac_datarootdir_seen=
+-
+ ac_sed_dataroot='
+ /datarootdir/ {
+ p
+@@ -15216,12 +13001,11 @@
+ /@docdir@/p
+ /@infodir@/p
+ /@localedir@/p
+-/@mandir@/p
+-'
++/@mandir@/p'
+ case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+ *datarootdir*) ac_datarootdir_seen=yes;;
+ *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+ $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+ _ACEOF
+ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+@@ -15231,7 +13015,7 @@
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+- s&\\\${datarootdir}&$datarootdir&g' ;;
++ s&\\\${datarootdir}&$datarootdir&g' ;;
+ esac
+ _ACEOF
+
+@@ -15260,14 +13044,12 @@
+ $ac_datarootdir_hack
+ "
+ eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++ || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+ test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ which seems to be undefined. Please make sure it is defined." >&5
+ $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ which seems to be undefined. Please make sure it is defined." >&2;}
+@@ -15277,9 +13059,7 @@
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+@@ -15290,25 +13070,19 @@
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+- { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+ $as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+-$as_echo "$as_me: error: could not create $ac_file" >&2;}
+- { (exit 1); exit 1; }; }
++ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+- || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
+-$as_echo "$as_me: error: could not create -" >&2;}
+- { (exit 1); exit 1; }; }
++ || as_fn_error "could not create -" "$LINENO" 5
+ fi
+ # Compute "$ac_file"'s index in $config_headers.
+ _am_arg="$ac_file"
+@@ -15346,7 +13120,7 @@
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+ $as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+@@ -15441,47 +13215,7 @@
+ q
+ }
+ s/.*/./; q'`
+- { as_dir=$dirpart/$fdir
+- case $as_dir in #(
+- -*) as_dir=./$as_dir;;
+- esac
+- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+- as_dirs=
+- while :; do
+- case $as_dir in #(
+- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+- *) as_qdir=$as_dir;;
+- esac
+- as_dirs="'$as_qdir' $as_dirs"
+- as_dir=`$as_dirname -- "$as_dir" ||
+-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$as_dir" : 'X\(//\)[^/]' \| \
+- X"$as_dir" : 'X\(//\)$' \| \
+- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+-$as_echo X"$as_dir" |
+- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+- s//\1/
+- q
+- }
+- /^X\(\/\/\)[^/].*/{
+- s//\1/
+- q
+- }
+- /^X\(\/\/\)$/{
+- s//\1/
+- q
+- }
+- /^X\(\/\).*/{
+- s//\1/
+- q
+- }
+- s/.*/./; q'`
+- test -d "$as_dir" && break
+- done
+- test -z "$as_dirs" || eval "mkdir $as_dirs"
+- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+- { (exit 1); exit 1; }; }; }
++ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+@@ -16136,15 +13870,12 @@
+ done # for ac_tag
+
+
+-{ (exit 0); exit 0; }
++as_fn_exit 0
+ _ACEOF
+-chmod +x $CONFIG_STATUS
+ ac_clean_files=$ac_clean_files_save
+
+ test $ac_write_fail = 0 ||
+- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+- { (exit 1); exit 1; }; }
++ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+ # configure is writing to config.log, and then calls config.status.
+@@ -16165,10 +13896,10 @@
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+- $ac_cs_success || { (exit 1); exit 1; }
++ $ac_cs_success || as_fn_exit $?
+ fi
+ if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+- { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+ $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+ fi
+
+diff '-x*config.guess' '-x*config.sub' -Naur libart-lgpl-2.3.21.old/ltmain.sh libart-lgpl-2.3.21/ltmain.sh
+--- libart-lgpl-2.3.21.old/ltmain.sh 2010-04-01 15:39:39.000000000 +0200
++++ libart-lgpl-2.3.21/ltmain.sh 2010-04-25 11:34:11.388351801 +0200
+@@ -1,6 +1,6 @@
+ # Generated from ltmain.m4sh.
+
+-# ltmain.sh (GNU libtool) 2.2.6
++# ltmain.sh (GNU libtool) 2.2.6b
+ # Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+@@ -65,7 +65,7 @@
+ # compiler: $LTCC
+ # compiler flags: $LTCFLAGS
+ # linker: $LD (gnu? $with_gnu_ld)
+-# $progname: (GNU libtool) 2.2.6
++# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2
+ # automake: $automake_version
+ # autoconf: $autoconf_version
+ #
+@@ -73,9 +73,9 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
--VERSION=1.5.24
-+VERSION="1.5.24 Debian 1.5.24-2"
- TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
-
- # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-@@ -2122,7 +2122,10 @@
+-VERSION=2.2.6
++VERSION="2.2.6b Debian-2.2.6b-2"
+ TIMESTAMP=""
+-package_revision=1.3012
++package_revision=1.3017
+
+ # Be Bourne compatible
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+@@ -116,15 +116,15 @@
+
+ : ${CP="cp -f"}
+ : ${ECHO="echo"}
+-: ${EGREP="/usr/bin/grep -E"}
+-: ${FGREP="/usr/bin/grep -F"}
+-: ${GREP="/usr/bin/grep"}
++: ${EGREP="/bin/grep -E"}
++: ${FGREP="/bin/grep -F"}
++: ${GREP="/bin/grep"}
+ : ${LN_S="ln -s"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+-: ${SED="/opt/local/bin/gsed"}
++: ${SED="/bin/sed"}
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
+
+@@ -5033,7 +5033,10 @@
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
@@ -698,16 +26113,101 @@
+ ;;
esac
fi
- if test "$pass" = dlopen; then
-@@ -3244,6 +3247,11 @@
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+@@ -5344,19 +5347,19 @@
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ if $opt_duplicate_deps ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
++ tmp_libs="$tmp_libs $deplib"
++ done
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- deplibs="$deplib $deplibs"
+- if $opt_duplicate_deps ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done
+ continue
+ fi # $pass = conv
+
+@@ -5893,6 +5896,7 @@
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
++ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+@@ -6206,6 +6210,9 @@
revision="$number_minor"
lt_irix_increment=no
;;
+ *)
-+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
-+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-+ exit $EXIT_FAILURE
++ func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+ ;;
esac
;;
no)
+diff '-x*config.guess' '-x*config.sub' -Naur libart-lgpl-2.3.21.old/Makefile.in libart-lgpl-2.3.21/Makefile.in
+--- libart-lgpl-2.3.21.old/Makefile.in 2010-04-01 15:39:49.000000000 +0200
++++ libart-lgpl-2.3.21/Makefile.in 2010-04-25 11:34:17.804352369 +0200
+@@ -1,4 +1,4 @@
+-# Makefile.in generated by automake 1.11 from Makefile.am.
++# Makefile.in generated by automake 1.11.1 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+@@ -210,6 +210,7 @@
+ PACKAGE_NAME = @PACKAGE_NAME@
+ PACKAGE_STRING = @PACKAGE_STRING@
+ PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ RANLIB = @RANLIB@
+@@ -749,7 +750,8 @@
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+- || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
++ || find "$(distdir)" -type d ! -perm -755 \
++ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+@@ -792,17 +794,17 @@
+ distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
++ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
++ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
++ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
++ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
More information about the pkg-gnome-commits
mailing list