[DebianGIS-dev] r2312 - packages/h5utils/branches/upstream/current
frankie at alioth.debian.org
frankie at alioth.debian.org
Wed Jun 24 12:26:11 UTC 2009
Author: frankie
Date: 2009-06-24 12:26:10 +0000 (Wed, 24 Jun 2009)
New Revision: 2312
Modified:
packages/h5utils/branches/upstream/current/COPYING
packages/h5utils/branches/upstream/current/ChangeLog
packages/h5utils/branches/upstream/current/INSTALL
packages/h5utils/branches/upstream/current/Makefile.am
packages/h5utils/branches/upstream/current/Makefile.in
packages/h5utils/branches/upstream/current/NEWS
packages/h5utils/branches/upstream/current/aclocal.m4
packages/h5utils/branches/upstream/current/arrayh4.c
packages/h5utils/branches/upstream/current/arrayh4.h
packages/h5utils/branches/upstream/current/arrayh5.c
packages/h5utils/branches/upstream/current/arrayh5.h
packages/h5utils/branches/upstream/current/compile
packages/h5utils/branches/upstream/current/config.h.in
packages/h5utils/branches/upstream/current/configure
packages/h5utils/branches/upstream/current/configure.ac
packages/h5utils/branches/upstream/current/copyright.h
packages/h5utils/branches/upstream/current/depcomp
packages/h5utils/branches/upstream/current/h4fromh5.c
packages/h5utils/branches/upstream/current/h5fromh4.1
packages/h5utils/branches/upstream/current/h5fromh4.c
packages/h5utils/branches/upstream/current/h5fromitxt.c
packages/h5utils/branches/upstream/current/h5fromtxt.1
packages/h5utils/branches/upstream/current/h5fromtxt.c
packages/h5utils/branches/upstream/current/h5math.1
packages/h5utils/branches/upstream/current/h5math.c
packages/h5utils/branches/upstream/current/h5topng.c
packages/h5utils/branches/upstream/current/h5totxt.1
packages/h5utils/branches/upstream/current/h5totxt.c
packages/h5utils/branches/upstream/current/h5tov5d.1
packages/h5utils/branches/upstream/current/h5tov5d.c
packages/h5utils/branches/upstream/current/h5tovtk.1
packages/h5utils/branches/upstream/current/h5tovtk.c
packages/h5utils/branches/upstream/current/h5utils.c
packages/h5utils/branches/upstream/current/h5utils.h
packages/h5utils/branches/upstream/current/install-sh
packages/h5utils/branches/upstream/current/missing
packages/h5utils/branches/upstream/current/writepng.c
packages/h5utils/branches/upstream/current/writepng.h
Log:
[svn-upgrade] Integrating new upstream version, h5utils (1.12)
Modified: packages/h5utils/branches/upstream/current/COPYING
===================================================================
--- packages/h5utils/branches/upstream/current/COPYING 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/COPYING 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,8 +1,7 @@
#############################################################################
The h5utils package is
- Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004, 2005
- by the Massachusetts Institute of Technology
+ Copyright (c) 1999-2009 by the Massachusetts Institute of Technology
#############################################################################
The following license applies to all files in the
Modified: packages/h5utils/branches/upstream/current/ChangeLog
===================================================================
--- packages/h5utils/branches/upstream/current/ChangeLog 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/ChangeLog 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1 +1,1250 @@
-Generated by mkdist.sh
+Fri Jun 12 17:34:08 EDT 2009 stevenj at alum.mit.edu
+ * Fixed installation of h5read.oct for Octave 3.x.
+
+ M ./NEWS +2
+ M ./configure.ac -1 +4
+
+Fri Jun 12 17:13:55 EDT 2009 stevenj at alum.mit.edu
+ * flip vertical axis in writepng, corresponding better to user expectations
+
+ M ./NEWS -1 +6
+ M ./configure.ac -1 +1
+ M ./writepng.c -3 +3
+
+Fri Jun 12 17:05:47 EDT 2009 stevenj at alum.mit.edu
+ * mkdist.sh is no longer needed
+
+ R ./mkdist.sh
+
+Fri Jun 12 17:04:59 EDT 2009 stevenj at alum.mit.edu
+ * copyright year bump
+
+ M ./COPYING -2 +1
+ M ./arrayh4.c -1 +1
+ M ./arrayh4.h -1 +1
+ M ./arrayh5.h -1 +1
+ M ./copyright.h -1 +1
+ M ./h4fromh5.1 -1 +1
+ M ./h4fromh5.c -1 +1
+ M ./h5fromh4.1 -1 +1
+ M ./h5fromh4.c -1 +1
+ M ./h5fromitxt.c -1 +1
+ M ./h5fromtxt.1 -1 +1
+ M ./h5fromtxt.c -1 +1
+ M ./h5math.1 -1 +1
+ M ./h5math.c -1 +1
+ M ./h5topng.c -1 +1
+ M ./h5totxt.1 -1 +1
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.1 -1 +1
+ M ./h5tov5d.c -2 +2
+ M ./h5tovtk.c -1 +1
+ M ./h5utils.c -1 +1
+ M ./h5utils.h -1 +1
+ M ./writepng.c -1 +1
+ M ./writepng.h -1 +1
+
+Fri Jun 12 17:03:57 EDT 2009 stevenj at alum.mit.edu
+ * fixed h5tovtk -2, more portable handling of integer types
+
+ M ./NEWS +4
+ M ./configure.ac -11 +13
+ M ./h5tovtk.c -7 +30
+
+Mon Apr 28 15:55:11 EDT 2008 stevenj at alum.mit.edu
+ tagged 1.11.1
+
+
+Mon Apr 28 15:53:59 EDT 2008 stevenj at alum.mit.edu
+ * copyright bump
+
+ M ./arrayh5.c -1 +1
+ M ./copyright.h -1 +1
+ M ./h5tovtk.c -1 +1
+
+Mon Apr 28 15:48:22 EDT 2008 stevenj at alum.mit.edu
+ * bug fix: autoconf 2.60 makes $datadir refer to $datarootdir which refers to $prefix, so we have to call "eval" twice (similar to AC_DEFINE_DIR macro in autoconf macro archive)
+
+ M ./NEWS +5
+ M ./configure.ac -1 +2
+
+Thu Apr 24 15:48:29 EDT 2008 stevenj at alum.mit.edu
+ tagged 1.11
+
+
+Thu Apr 24 15:41:32 EDT 2008 stevenj at alum.mit.edu
+ * added darcs-dist target
+
+ A ./ChangeLog
+ M ./Makefile.am +9
+
+Thu Apr 24 15:39:38 EDT 2008 stevenj at alum.mit.edu
+ * version bump, rm autoconf warning
+
+ M ./NEWS +7
+ M ./configure.ac -1 +2
+
+Thu Apr 24 15:34:39 EDT 2008 stevenj at alum.mit.edu
+ * compatibility with HDF5 1.8
+
+ M ./arrayh5.c +3
+
+Tue Apr 3 13:53:51 EDT 2007 stevenj at alum.mit.edu
+ * fix typo
+
+ M ./h5tovtk.1 -1
+
+Tue Apr 3 13:52:13 EDT 2007 stevenj at alum.mit.edu
+ * h5tovtk should write out dimensions in correct order, not the reverse, according to VTK's column-major convention; thanks to Andreas Wilde for the suggestion and a preliminary patch
+
+ M ./h5tovtk.c -7 +13
+
+Tue Apr 3 13:35:02 EDT 2007 stevenj at alum.mit.edu
+ * darcs updates
+
+ R ./ChangeLog
+ R ./install-sh
+ M ./mkdist.sh -9 +1
+
+Wed Sep 20 11:46:47 EDT 2006 stevenj
+ * version bump
+
+ M ./NEWS +5
+ M ./configure.ac -1 +1
+
+Wed Sep 20 11:41:03 EDT 2006 stevenj
+ * add EXEEXT for Cygwin builds
+
+ M ./configure.ac -5 +5
+
+Fri Oct 21 19:53:29 EDT 2005 stevenj
+ * whoops
+
+ M ./Makefile.am -1 +1
+
+Fri Oct 21 19:53:00 EDT 2005 stevenj
+ * pass .c file to mkoctfile since it may need special compilation flags
+ pass .c file to mkoctfile since it may need special compilation flags
+ (e.g. -fPIC)
+
+
+ M ./Makefile.am -1 +1
+
+Fri Sep 2 17:39:01 EDT 2005 stevenj
+ * version bump
+
+ M ./COPYING -1 +2
+ M ./NEWS +8
+ M ./arrayh4.c -1 +1
+ M ./arrayh5.c -1 +1
+ M ./configure.ac -1 +1
+ M ./copyright.h -1 +1
+ M ./h4fromh5.c -1 +1
+ M ./h5fromh4.1 -2 +2
+ M ./h5fromh4.c -1 +1
+ M ./h5fromitxt.c -1 +1
+ M ./h5fromtxt.1 -2 +2
+ M ./h5fromtxt.c -1 +1
+ M ./h5math.1 -3 +3
+ M ./h5math.c -1 +1
+ M ./h5topng.c -1 +1
+ M ./h5totxt.1 -2 +2
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.1 -2 +2
+ M ./h5tov5d.c -2 +2
+ M ./h5tovtk.1 -1 +1
+ M ./h5tovtk.c -1 +1
+ M ./h5utils.c -1 +1
+ M ./writepng.c -1 +1
+
+Fri Sep 2 15:23:48 EDT 2005 stevenj
+ * added h4fromh5.1, and added -T option to h4fromh5
+
+ A ./h4fromh5.1
+ M ./h4fromh5.c -2 +9
+
+Fri Jul 15 13:37:56 EDT 2005 stevenj
+ * added h4fromh5 (no man page yet)
+
+ M ./Makefile.am -1 +4
+ M ./autogen.sh -1 +1
+ M ./configure.ac -11 +20
+ A ./h4fromh5.c
+
+Fri Jul 15 12:33:34 EDT 2005 stevenj
+ * added autogen.sh
+
+ A ./autogen.sh
+ M ./install-sh -52 +50
+
+Fri Jun 17 13:42:38 EDT 2005 stevenj
+ * improve contrast by making dark-light transitions more gradual
+
+ M ./colormaps/dkbluered -7 +31
+
+Thu Jun 16 15:35:02 EDT 2005 stevenj
+ * added dkbluered colormap, slightly simplified winter colormap
+
+ M ./Makefile.am -1 +1
+ A ./colormaps/dkbluered
+ M ./colormaps/winter -15 +1
+
+Mon Aug 16 16:28:40 EDT 2004 stevenj
+ * simplified
+
+ M ./colormaps/autumn -15 +1
+ M ./colormaps/cool -15 +1
+
+Thu Aug 5 00:53:49 EDT 2004 stevenj
+ * version bump
+
+ M ./NEWS +5
+ M ./configure.ac -1 +1
+
+Tue Aug 3 13:08:30 EDT 2004 stevenj
+ * don't mix declarations with code (thanks to Maarten van Reeuwijk for the bug report)
+
+ M ./h5topng.c -1 +2
+
+Mon Jul 12 21:11:30 EDT 2004 stevenj
+ tagged h5utils-1-9
+
+
+Mon Jul 12 21:11:30 EDT 2004 stevenj
+ * updated NEWS for 1.9
+
+ M ./NEWS -1 +8
+
+Mon Jul 12 21:04:45 EDT 2004 stevenj
+ * update for latest libmatheval
+
+ M ./configure.ac -1 +1
+ M ./h5math.c -8 +16
+
+Sat Jun 5 11:30:54 EDT 2004 stevenj
+ * support Matlab-like notation for slices, tiling overlay/contour to cover data
+
+ M ./arrayh5.c +44
+ M ./arrayh5.h +2
+ M ./h5topng.1.in -4 +14
+ M ./h5topng.c -34 +125
+ M ./writepng.c -32 +37
+ M ./writepng.h +2
+
+Mon May 24 00:51:58 EDT 2004 stevenj
+ * version bump
+
+ M ./NEWS +6
+ M ./configure.ac -1 +1
+
+Mon May 24 00:49:42 EDT 2004 stevenj
+ * added h5math man page etc.
+
+ A ./h5math.1
+ M ./h5math.c -4 +4
+
+Mon May 24 00:32:20 EDT 2004 stevenj
+ * whoops
+
+ M ./h5tov5d.1 -1 +1
+
+Sun May 23 23:32:54 EDT 2004 stevenj
+ * wrapping
+
+ M ./h5math.c -1 +2
+
+Sun May 23 23:11:34 EDT 2004 stevenj
+ * fixed copyright dates in man pages
+
+ M ./h5fromh4.1 -2 +2
+ M ./h5fromtxt.1 -2 +2
+ M ./h5topng.1.in -2 +2
+ M ./h5totxt.1 -2 +2
+ M ./h5tov5d.1 -2 +2
+ M ./h5tovtk.1 -1 +1
+
+Sun May 23 22:14:49 EDT 2004 stevenj
+ * whoops
+
+ M ./h5math.c -2 +4
+
+Sun May 23 22:10:36 EDT 2004 stevenj
+ * make "t" variable the same as the last dimension, consistent with slice convention
+
+ M ./h5math.c -3 +3
+
+Sun May 23 22:05:31 EDT 2004 stevenj
+ * added h5math utility (still needs man page)
+
+ M ./Makefile.am -2 +5
+ M ./configure.ac -1 +13
+ A ./h5math.c
+
+Sun May 23 20:21:52 EDT 2004 stevenj
+ * use my_strdup everywhere, get rid of some compiler warnings
+
+ M ./h5fromh4.c -12 +4
+ M ./h5fromitxt.c -14 +8
+ M ./h5fromtxt.c -10 +4
+ M ./h5topng.c -8
+ M ./h5totxt.c -15 +4
+ M ./h5tov5d.c -8 +2
+ M ./h5tovtk.c -8 +2
+ M ./h5utils.c +11
+ M ./h5utils.h +1
+
+Sat May 22 13:37:54 EDT 2004 stevenj
+ tagged h5utils-1-8
+
+
+Sat May 22 13:37:54 EDT 2004 stevenj
+ * vpath build
+
+ M ./Makefile.am -1 +1
+
+Sat May 22 13:23:35 EDT 2004 stevenj
+ * fixed some formatting problems
+
+ M ./h5topng.1.in -9 +16
+
+Sat May 22 13:19:22 EDT 2004 stevenj
+ * make sure EXTRA_MANS is distributed
+
+ M ./Makefile.am -2 +2
+
+Sat May 22 12:58:44 EDT 2004 stevenj
+ * planned release date
+
+ M ./NEWS -1 +1
+
+Fri May 21 20:55:40 EDT 2004 stevenj
+ * whoops, missing '0'
+
+ M ./h5tovtk.c +3
+
+Fri May 21 20:51:40 EDT 2004 stevenj
+ * note more digits
+
+ M ./NEWS -1 +2
+
+Fri May 21 20:50:14 EDT 2004 stevenj
+ * whoops, screwed up slices
+
+ M ./arrayh5.c -23 +7
+ M ./h5totxt.c -2 +1
+
+Fri May 21 20:34:35 EDT 2004 stevenj
+ * don't know release date yet
+
+ M ./NEWS -1 +1
+
+Fri May 21 20:32:49 EDT 2004 stevenj
+ * new version
+
+ M ./NEWS +24
+ M ./configure.ac -1 +1
+
+Fri May 21 20:25:18 EDT 2004 stevenj
+ * mkdist script
+
+ A ./mkdist.sh
+
+Fri May 21 20:24:48 EDT 2004 stevenj
+ * generate automatically
+
+ M ./ChangeLog -256 +1
+
+Fri May 21 20:23:41 EDT 2004 stevenj
+ * add latest colormaps
+
+ M ./Makefile.am -4 +5
+
+Fri May 21 20:19:06 EDT 2004 stevenj
+ * check for -8 with -A
+
+ M ./h5topng.c +3
+
+Fri May 21 20:17:57 EDT 2004 stevenj
+ * default to 24-bit output, -8 for old behavior
+
+ M ./h5topng.1.in -1 +7
+ M ./h5topng.c -5 +11
+ M ./writepng.c -29 +50
+ M ./writepng.h -2 +2
+
+Fri May 21 19:50:52 EDT 2004 stevenj
+ * updated man pages
+
+ M ./h5topng.1.in -21 +54
+ M ./h5totxt.1 -28 +30
+ M ./h5tov5d.1 -1 +27
+ M ./h5tovtk.1 +29
+
+Fri May 21 18:59:28 EDT 2004 stevenj
+ * added translucent overlay option
+
+ M ./arrayh4.c -1 +1
+ M ./arrayh5.c -2 +2
+ M ./colormaps/bluered -1 +1
+ M ./colormaps/gray -1 +1
+ A ./colormaps/green
+ A ./colormaps/yarg
+ A ./colormaps/yellow
+ M ./copyright.h -1 +1
+ M ./h5fromh4.c -1 +1
+ M ./h5fromitxt.c -1 +1
+ M ./h5fromtxt.c -1 +1
+ M ./h5topng.c -64 +154
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.c -2 +2
+ M ./h5tovtk.c -1 +1
+ M ./h5utils.c -1 +1
+ M ./writepng.c -21 +101
+ M ./writepng.h -2 +4
+
+Fri May 21 16:12:05 EDT 2004 stevenj
+ * make nx = cols by default in h5topng
+
+ M ./h5topng.c -1 +1
+
+Fri May 21 16:10:58 EDT 2004 stevenj
+ * INSTALL is supplied by automake --add-missing
+
+ R ./INSTALL
+
+Fri May 21 16:10:23 EDT 2004 stevenj
+ * support multiple slice dimensions
+
+ M ./INSTALL -23 +26
+ M ./Makefile.am -1 +2
+ M ./arrayh5.c -65 +103
+ M ./arrayh5.h -1 +6
+ M ./configure.ac -2 +17
+ M ./h5fromitxt.c -2 +1
+ M ./h5read.cc -2 +2
+ M ./h5topng.c -18 +32
+ M ./h5totxt.c -36 +35
+ M ./h5tov5d.c -14 +50
+ M ./h5tovtk.c -4 +29
+ M ./install-sh -178 +252
+
+Mon Mar 1 21:28:44 EST 2004 stevenj
+ * added h5fromitxt
+
+ M ./Makefile.am -1 +2
+ A ./h5fromitxt.c
+
+Mon Jul 15 13:27:27 EDT 2002 stevenj
+ tagged h5utils-1-7-2
+
+
+Mon Jul 15 13:27:27 EDT 2002 stevenj
+ * C++ fix for g++ 3.x, from Josselin Mouette
+
+ M ./h5read.cc -1 +1
+
+Fri Jun 14 19:48:39 EDT 2002 stevenj
+ * follow gd lib in initializing alpha before palette (don't know if it matters)
+
+ M ./writepng.c -5 +4
+
+Fri Jun 14 19:48:07 EDT 2002 stevenj
+ * don't use colormap dir for ./<colormap> or /<colormap>
+
+ M ./h5topng.c -1 +2
+
+Wed May 29 23:37:54 EDT 2002 stevenj
+ * added -a and -. flags
+
+ M ./h5totxt.1 +13
+ M ./h5totxt.c -18 +60
+
+Sat Mar 16 17:46:44 EST 2002 stevenj
+ * added 1.7.1 notes
+
+ M ./NEWS +5
+
+Sat Mar 16 17:15:16 EST 2002 stevenj
+ * fixed h5fromh4 and make dist
+
+ M ./Makefile.am -7 +9
+ M ./configure.ac -2 +2
+
+Sat Mar 16 16:58:28 EST 2002 stevenj
+ tagged h5utils-1-7-1
+
+
+Sat Mar 16 16:58:28 EST 2002 stevenj
+ * fixed array overrun causing floating-point exceptions on Alpha (thanks to Marin Soljacic for the bug report)
+
+ M ./writepng.c -5 +7
+
+Thu Mar 14 03:06:28 EST 2002 stevenj
+ * use automake
+
+ A ./Makefile.am
+ R ./Makefile.in
+ A ./configure.ac
+ R ./configure.in
+ M ./h5fromh4.c -1 +1
+ M ./h5fromtxt.c -1 +1
+ M ./h5topng.c -2 +2
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.c -1 +1
+ M ./h5tovtk.c -1 +1
+
+Wed Mar 13 18:48:05 EST 2002 stevenj
+ * use mandir
+
+ M ./Makefile.in -18 +19
+
+Sun Mar 10 19:47:30 EST 2002 stevenj
+ * added URL
+
+ M ./README +1
+
+Sat Mar 9 16:48:15 EST 2002 stevenj
+ tagged h5utils-1-7
+
+
+Sat Mar 9 16:48:15 EST 2002 stevenj
+ * print warning for -c <h5file>
+
+ M ./h5topng.c -2 +3
+
+Sat Mar 9 16:35:59 EST 2002 stevenj
+ * whoops
+
+ M ./Makefile.in -1 +1
+
+Sat Mar 9 16:29:19 EST 2002 stevenj
+ * updated dates
+
+ M ./NEWS -1 +1
+ M ./h5fromh4.1 -1 +1
+ M ./h5fromtxt.1 -1 +1
+ M ./h5topng.1.in -1 +1
+ M ./h5totxt.1 -1 +1
+ M ./h5tov5d.1 -1 +1
+ M ./h5tovtk.1 -1 +1
+
+Sat Mar 9 15:13:29 EST 2002 stevenj
+ * made more GNU-ly correct
+
+ A ./INSTALL
+ A ./README
+ R ./README-h5utils.html
+
+Sat Mar 9 15:09:26 EST 2002 stevenj
+ * added AUTHORS file to be GNU-ly correct
+
+ A ./AUTHORS
+
+Tue Mar 5 02:23:55 EST 2002 stevenj
+ * eliminated code duplication
+
+ M ./Makefile.in -9 +9
+ M ./h5fromh4.c -43 +3
+ M ./h5fromtxt.c -28 +1
+ M ./h5topng.c -42 +3
+ M ./h5totxt.c -28 +1
+ M ./h5tov5d.c -48 +1
+ M ./h5tovtk.c -62 +4
+ A ./h5utils.c
+ A ./h5utils.h
+
+Tue Mar 5 02:06:31 EST 2002 stevenj
+ * finally fixed garbage pixels bug in h5topng
+
+ M ./NEWS +3
+ M ./writepng.c -10 +9
+
+Tue Mar 5 01:36:21 EST 2002 stevenj
+ * added -0 option
+
+ M ./NEWS +3
+ M ./arrayh5.c -51 +55
+ M ./arrayh5.h -1 +2
+ M ./h5read.cc -1 +1
+ M ./h5topng.1.in -1 +8
+ M ./h5topng.c -4 +9
+ M ./h5totxt.1 -1 +8
+ M ./h5totxt.c -3 +8
+ M ./h5tov5d.c -3 +3
+ M ./h5tovtk.c -1 +1
+
+Tue Mar 5 00:03:20 EST 2002 stevenj
+ * added -R option
+
+ M ./NEWS +3
+ M ./h5topng.1.in -1 +9
+ M ./h5topng.c -16 +40
+
+Mon Mar 4 23:25:15 EST 2002 stevenj
+ * added alpha channel support to color maps
+
+ M ./colormaps/autumn -16 +16
+ M ./colormaps/bluered -3 +3
+ M ./colormaps/bone -64 +64
+ M ./colormaps/colorcube -64 +64
+ M ./colormaps/cool -16 +16
+ M ./colormaps/copper -64 +64
+ M ./colormaps/flag -64 +64
+ M ./colormaps/gray -2 +2
+ M ./colormaps/hot -64 +64
+ M ./colormaps/hsv -64 +64
+ M ./colormaps/jet -16 +16
+ M ./colormaps/lines -64 +64
+ M ./colormaps/pink -64 +64
+ M ./colormaps/prism -16 +16
+ M ./colormaps/spring -16 +16
+ M ./colormaps/summer -16 +16
+ M ./colormaps/vga -16 +16
+ M ./colormaps/winter -16 +16
+ M ./h5topng.1.in -3 +4
+ M ./h5topng.c -12 +13
+ M ./writepng.c -4 +31
+ M ./writepng.h -3 +3
+
+Mon Mar 4 22:22:11 EST 2002 stevenj
+ * better error message for -c (catches common mistake)
+
+ M ./h5topng.c -4 +7
+
+Mon Mar 4 22:21:45 EST 2002 stevenj
+ * slight improvements
+
+ M ./h5topng.1.in -8 +7
+
+Mon Mar 4 20:31:24 EST 2002 stevenj
+ * have built-in gray colormap fallback
+
+ M ./h5topng.c -9 +24
+
+Sun Mar 3 23:48:26 EST 2002 stevenj
+ * minor improvements; noted hsv
+
+ M ./h5topng.1.in -8 +11
+
+Sun Mar 3 23:33:46 EST 2002 stevenj
+ * whoops
+
+ R ./h5topng.1
+
+Sun Mar 3 23:32:56 EST 2002 stevenj
+ * linewrapped
+
+ A ./h5topng.1
+ M ./h5topng.1.in -2 +6
+
+Sun Mar 3 23:32:16 EST 2002 stevenj
+ * updated for 1.7
+
+ M ./NEWS +15
+
+Sun Mar 3 23:22:43 EST 2002 stevenj
+ * added
+
+ A ./ChangeLog
+
+Sun Mar 3 23:21:28 EST 2002 stevenj
+ * 2002 copyright year update
+
+ M ./COPYING -1 +1
+ M ./README-h5utils.html -1 +1
+ M ./arrayh4.c -1 +1
+ M ./arrayh4.h -1 +1
+ M ./arrayh5.c -1 +1
+ M ./arrayh5.h -1 +1
+ M ./copyright.h -1 +1
+ M ./h5fromh4.1 -2 +2
+ M ./h5fromh4.c -1 +1
+ M ./h5fromtxt.1 -2 +2
+ M ./h5fromtxt.c -1 +1
+ M ./h5read.cc -1 +1
+ M ./h5topng.1.in -2 +2
+ M ./h5topng.c -1 +1
+ M ./h5totxt.1 -2 +2
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.1 -2 +2
+ M ./h5tov5d.c -2 +2
+ M ./writepng.c -1 +1
+ M ./writepng.h -1 +1
+
+Sun Mar 3 23:17:58 EST 2002 stevenj
+ * fixed h5tovtk man page
+
+ M ./h5tovtk.1 -16 +68
+ M ./h5tovtk.c -6 +6
+
+Fri Mar 1 02:28:33 EST 2002 stevenj
+ * noted location of colormap files
+
+ M ./h5topng.c +1
+
+Fri Mar 1 02:10:52 EST 2002 stevenj
+ * added variable colormap support
+
+ M ./Makefile.in -2 +13
+ M ./configure.in -1 +14
+ R ./h5topng.1
+ A ./h5topng.1.in
+ M ./h5topng.c -5 +83
+ M ./writepng.c -16 +13
+ M ./writepng.h -3 +7
+
+Fri Mar 1 02:10:26 EST 2002 stevenj
+ * synced with latest arrayh5
+
+ M ./h5read.cc -1 +1
+
+Fri Mar 1 01:11:37 EST 2002 stevenj
+ * added some color map files
+
+ A ./colormaps/
+ A ./colormaps/autumn
+ A ./colormaps/bluered
+ A ./colormaps/bone
+ A ./colormaps/colorcube
+ A ./colormaps/cool
+ A ./colormaps/copper
+ A ./colormaps/flag
+ A ./colormaps/gray
+ A ./colormaps/hot
+ A ./colormaps/hsv
+ A ./colormaps/jet
+ A ./colormaps/lines
+ A ./colormaps/pink
+ A ./colormaps/prism
+ A ./colormaps/spring
+ A ./colormaps/summer
+ A ./colormaps/vga
+ A ./colormaps/winter
+
+Sat Jan 5 15:15:11 EST 2002 stevenj
+ * added preliminary h5tovtk
+
+ M ./Makefile.in -2 +16
+ M ./arrayh5.c -1 +5
+ M ./arrayh5.h -1 +1
+ M ./configure.in -1 +28
+ M ./h5topng.c -2 +2
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.c -3 +3
+ A ./h5tovtk.1
+ A ./h5tovtk.c
+
+Mon Oct 15 20:47:15 EDT 2001 stevenj
+ * Use CPPFLAGS and LDFLAGS when calling mkoctfile! Thanks to Max Colice
+ Use CPPFLAGS and LDFLAGS when calling mkoctfile! Thanks to Max Colice
+ for the bug report.
+
+
+ M ./Makefile.in -2 +2
+
+Tue Oct 2 01:09:50 EDT 2001 stevenj
+ * whoops, fixed datatype in -T mode
+
+ M ./h5tov5d.c -10 +8
+
+Sat Sep 22 19:21:04 EDT 2001 stevenj
+ * slight bug fix in -T (?)
+
+ M ./h5tov5d.c -3 +10
+
+Sat Sep 22 18:54:36 EDT 2001 stevenj
+ * added -T option to h5tov5d
+
+ M ./NEWS +2
+ M ./h5tov5d.1 +3
+ M ./h5tov5d.c -26 +46
+
+Sun Mar 18 01:32:07 EST 2001 stevenj
+ * whoops, fixed problem when --without-h5tov5d and --without-h5fromh4 are used. Thanks to Nikola Ivanov Nikolov for the fix.
+
+ M ./Makefile.in -2 +1
+
+Wed Feb 14 13:48:01 EST 2001 stevenj
+ * minor fix
+
+ M ./h5fromtxt.1 -1 +1
+
+Wed Jan 17 00:05:12 EST 2001 stevenj
+ tagged h5utils-1-6
+
+
+Wed Jan 17 00:05:12 EST 2001 stevenj
+ * Don't build h5fromh4 if h4toh5 is present. Bumped version and copyright year.
+
+ M ./COPYING -1 +1
+ M ./NEWS +6
+ M ./README-h5utils.html -1 +1
+ M ./arrayh4.c -1 +1
+ M ./arrayh4.h -1 +1
+ M ./arrayh5.c -1 +1
+ M ./arrayh5.h -1 +1
+ M ./configure.in -8 +21
+ M ./copyright.h -1 +1
+ M ./h5fromh4.1 -2 +2
+ M ./h5fromh4.c -1 +1
+ M ./h5fromtxt.1 -2 +2
+ M ./h5fromtxt.c -1 +1
+ M ./h5read.cc -1 +1
+ M ./h5topng.1 -2 +2
+ M ./h5topng.c -1 +1
+ M ./h5totxt.1 -2 +2
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.1 -2 +2
+ M ./h5tov5d.c -2 +2
+ M ./writepng.c -1 +1
+ M ./writepng.h -1 +1
+
+Sat Dec 9 02:01:59 EST 2000 stevenj
+ * 'make dist' should call autoheader
+
+ M ./Makefile.in -1 +1
+
+Sat Dec 9 02:00:21 EST 2000 stevenj
+ * bumped version number
+
+ M ./NEWS +7
+ M ./configure.in -1 +1
+
+Sat Dec 9 01:58:37 EST 2000 stevenj
+ * Support disabling Octave plugin manually, in case of C++ craziness.
+ Support disabling Octave plugin manually, in case of C++ craziness.
+ Support Vis5d+ header file locations. Support Debian HDF header file
+ locations. Use autoheader.
+
+
+ M ./Makefile.in -1 +1
+ M ./arrayh4.h -1 +5
+ R ./config.h.in
+ M ./configure.in -3 +15
+ M ./h5tov5d.c -1 +3
+
+Fri Jul 28 07:58:39 EDT 2000 stevenj
+ * fixed bug in contour plotting
+
+ M ./writepng.c -7 +11
+
+Sun Jul 9 22:39:52 EDT 2000 stevenj
+ * updated
+
+ M ./NEWS -1 +1
+
+Sun Jul 9 00:43:19 EDT 2000 stevenj
+ * Note that HDF4 libraries are required for h5fromh4.
+
+ M ./README-h5utils.html +3
+
+Sun Jul 9 00:41:45 EDT 2000 stevenj
+ * documented h5fromh4
+
+ M ./README-h5utils.html +8
+
+Tue May 30 02:14:21 EDT 2000 stevenj
+ * Added -S <s> option to h5topng as a shortcut for -X <s> -Y <s>.
+
+ M ./NEWS +2
+ M ./h5topng.1 -2 +4
+ M ./h5topng.c -1 +5
+
+Mon May 29 15:00:00 EDT 2000 stevenj
+ * bumped version
+
+ M ./NEWS -1 +5
+ M ./configure.in -1 +1
+
+Mon May 29 14:56:38 EDT 2000 stevenj
+ * slight fixes
+
+ M ./h5fromh4.1 -5 +7
+
+Mon May 29 14:52:33 EDT 2000 stevenj
+ * added h5fromh4 man page
+
+ A ./h5fromh4.1
+
+Mon May 29 04:51:07 EDT 2000 stevenj
+ * added h5fromh4
+
+ M ./Makefile.in -2 +17
+ A ./arrayh4.c
+ A ./arrayh4.h
+ M ./configure.in +10
+ A ./h5fromh4.c
+
+Mon May 29 04:37:47 EDT 2000 stevenj
+ * got rid of spurious "sep" variable
+
+ M ./h5fromtxt.c -6
+
+Sun May 28 19:13:08 EDT 2000 stevenj
+ tagged h5utils-1-4
+
+
+Sun May 28 19:13:08 EDT 2000 stevenj
+ * added h5fromtxt
+
+ M ./Makefile.in -2 +16
+ M ./NEWS +4
+ M ./README-h5utils.html +11
+ M ./arrayh5.c -16 +125
+ M ./arrayh5.h +4
+ M ./configure.in -1 +1
+ A ./h5fromtxt.1
+ A ./h5fromtxt.c
+ M ./h5topng.c -1 +1
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.c -1 +1
+
+Mon Jan 31 22:14:43 EST 2000 stevenj
+ tagged h5utils-1-3-4
+
+
+Mon Jan 31 22:14:43 EST 2000 stevenj
+ * slight correction
+
+ M ./h5topng.1 -1 +1
+
+Mon Jan 31 22:05:30 EST 2000 stevenj
+ * fix so it works without -C!
+
+ M ./h5topng.c -1 +2
+
+Mon Jan 31 22:02:17 EST 2000 stevenj
+ * bumped version
+
+ M ./NEWS +6
+ M ./configure.in -1 +1
+
+Mon Jan 31 21:59:32 EST 2000 stevenj
+ * improved crude contour feature
+
+ M ./h5topng.1 -2 +2
+ M ./h5topng.c -9 +11
+ M ./writepng.c -41 +45
+ M ./writepng.h -5 +2
+
+Mon Jan 31 20:43:28 EST 2000 stevenj
+ * Fixed display bug; thanks to Christoph Becher for the correction.
+
+ M ./h5topng.1 -2 +5
+
+Sun Jan 30 14:13:13 EST 2000 stevenj
+ * credited 1.3.3 bug report
+
+ M ./NEWS +1
+
+Sun Jan 30 14:06:09 EST 2000 stevenj
+ tagged h5utils-1-3-3
+
+
+Sun Jan 30 14:06:09 EST 2000 stevenj
+ * bumped version
+
+ M ./configure.in -1 +1
+
+Sun Jan 30 14:04:32 EST 2000 stevenj
+ * got rid of compiler warning
+
+ M ./NEWS +4
+ M ./arrayh5.c -2 +2
+
+Sun Jan 30 14:04:07 EST 2000 stevenj
+ * bug fix (uninitialized var)
+
+ M ./writepng.c -2 +1
+
+Fri Jan 28 21:26:20 EST 2000 stevenj
+ tagged h5utils-1-3-2
+
+
+Fri Jan 28 21:26:20 EST 2000 stevenj
+ * added -Z option
+
+ M ./NEWS +2
+ M ./h5topng.1 -1 +5
+ M ./h5topng.c -1 +11
+
+Fri Jan 28 18:03:46 EST 2000 stevenj
+ * fixed typo
+
+ M ./h5topng.c -1 +1
+
+Fri Jan 28 18:01:28 EST 2000 stevenj
+ * now support h5topng -C filename:dataset
+
+ M ./NEWS +4
+ M ./configure.in -1 +1
+ M ./h5topng.1 -2 +4
+ M ./h5topng.c -2 +9
+
+Thu Jan 27 19:54:35 EST 2000 stevenj
+ tagged h5utils-1-3-1
+
+
+Thu Jan 27 19:54:35 EST 2000 stevenj
+ * bumped version
+
+ M ./NEWS +5
+ M ./configure.in -1 +1
+
+Thu Jan 27 19:34:54 EST 2000 stevenj
+ * fixed bug in joining hdf5 files
+
+ M ./h5tov5d.c -1 +1
+
+Thu Jan 27 15:44:19 EST 2000 stevenj
+ * fixed handling of -d option so that it doesn't get overriden if only
+ fixed handling of -d option so that it doesn't get overriden if only
+ a single file specifies a dataset via fname:dataset.
+
+
+ M ./h5topng.c -3 +7
+ M ./h5totxt.c -3 +6
+
+Fri Jan 21 14:12:29 EST 2000 stevenj
+ tagged h5utils-1-3
+
+
+Fri Jan 21 14:12:29 EST 2000 stevenj
+ * documented changes
+
+ M ./NEWS +6
+ M ./README-h5utils.html +6
+
+Thu Jan 20 22:44:13 EST 2000 stevenj
+ * detect -lv5d library
+
+ M ./Makefile.in -1 +1
+ M ./config.h.in +3
+ M ./configure.in -2 +5
+ M ./h5tov5d.c -5 +6
+
+Thu Jan 20 22:36:57 EST 2000 stevenj
+ * added filename:dataset syntax
+
+ M ./arrayh5.c -1
+ M ./arrayh5.h +1
+ M ./configure.in -1 +1
+ M ./h5topng.1 -1 +3
+ M ./h5topng.c -6 +41
+ M ./h5totxt.1 -1 +3
+ M ./h5totxt.c -8 +43
+ M ./h5tov5d.1 -1 +3
+ M ./h5tov5d.c -7 +53
+
+Thu Jan 20 20:35:10 EST 2000 stevenj
+ tagged h5utils-1-2-3
+
+
+Thu Jan 20 20:35:10 EST 2000 stevenj
+ * bumped version
+
+ M ./NEWS +4
+ M ./configure.in -1 +1
+
+Thu Jan 20 20:33:39 EST 2000 stevenj
+ * fixed help message
+
+ M ./h5totxt.c -1 +1
+
+Wed Jan 12 22:52:25 EST 2000 stevenj
+ * use CPPFLAGS when compiling
+
+ M ./Makefile.in -1 +2
+ M ./NEWS +6
+ M ./configure.in -1 +1
+
+Sat Jan 1 12:47:34 EST 2000 stevenj
+ * h5tov5d -o now joins; bumped copyright year
+
+ M ./COPYING -1 +1
+ M ./NEWS +4
+ M ./README-h5utils.html -1 +1
+ M ./arrayh5.c -1 +1
+ M ./arrayh5.h -1 +1
+ M ./configure.in -1 +1
+ M ./copyright.h -1 +1
+ M ./h5read.cc -1 +1
+ M ./h5topng.1 -2 +2
+ M ./h5topng.c -1 +1
+ M ./h5totxt.1 -2 +2
+ M ./h5totxt.c -1 +1
+ M ./h5tov5d.1 -6 +12
+ M ./h5tov5d.c -117 +166
+ M ./writepng.c -1 +1
+ M ./writepng.h -1 +1
+
+Fri Dec 31 21:43:44 EST 1999 stevenj
+ tagged h5utils-1-2
+
+
+Fri Dec 31 21:43:44 EST 1999 stevenj
+ * noted changes
+
+ M ./NEWS +8
+
+Fri Dec 31 21:41:01 EST 1999 stevenj
+ * bumped version
+
+ M ./configure.in -1 +1
+
+Fri Dec 31 21:20:43 EST 1999 stevenj
+ * noted man page
+
+ M ./README-h5utils.html +3
+
+Fri Dec 31 21:17:38 EST 1999 stevenj
+ * updated license
+
+ M ./README-h5utils.html +22
+
+Fri Dec 31 21:05:29 EST 1999 stevenj
+ * added h5tov5d
+
+ M ./COPYING -21 +373
+ M ./Makefile.in -6 +32
+ M ./README-h5utils.html -2 +31
+ M ./configure.in +27
+ A ./copyright.h
+ M ./h5topng.c -23 +1
+ M ./h5totxt.c -23 +1
+ A ./h5tov5d.1
+ A ./h5tov5d.c
+
+Fri Dec 31 16:58:12 EST 1999 stevenj
+ * some cleanup
+
+ M ./configure.in -2 +9
+
+Fri Dec 31 16:55:39 EST 1999 stevenj
+ * Better documentation of (revised) installation.
+
+ M ./README-h5utils.html -6 +9
+
+Fri Dec 31 16:46:31 EST 1999 stevenj
+ * install h5read.oct in right place
+
+ M ./Makefile.in -4 +13
+ M ./configure.in +18
+
+Fri Dec 31 16:01:41 EST 1999 stevenj
+ * fixed install/uninstall rules so that they ignore things that aren't built
+
+ M ./Makefile.in -6 +27
+
+Mon Dec 6 17:49:46 EST 1999 stevenj
+ * small fixes
+
+ M ./README-h5utils.html -4 +5
+
+Mon Dec 6 17:40:56 EST 1999 stevenj
+ * added h5totxt
+
+ M ./Makefile.in -7 +14
+ A ./NEWS
+ M ./README-h5utils.html +8
+ M ./configure.in -1 +1
+ A ./h5totxt.1
+ A ./h5totxt.c
+
+Mon Nov 22 00:02:13 EST 1999 stevenj
+ tagged h5utils-1-0
+
+
+Mon Nov 22 00:02:13 EST 1999 stevenj
+ * don't strip (-s) man page!!
+
+ M ./Makefile.in -1 +1
+
+Sun Nov 21 23:50:36 EST 1999 stevenj
+ * changed README to HTML
+
+ R ./README
+ A ./README-h5utils.html
+
+Sun Nov 21 23:01:59 EST 1999 stevenj
+ * added man page
+
+ M ./Makefile.in +2
+ M ./README -1 +2
+ A ./h5topng.1
+
+Sun Nov 21 21:41:52 EST 1999 stevenj
+ * got rid of garbage file
+
+ R ./.png
+
+Sun Nov 21 21:39:48 EST 1999 stevenj
+ * made sure 'make clean' gets rid of h5read.o
+
+ M ./Makefile.in -1 +1
+
+Sun Nov 21 21:39:04 EST 1999 stevenj
+ * various fixes
+
+ M ./config.h.in +2
+ M ./configure.in -1 +1
+ M ./h5topng.c -4 +39
+
+Sun Nov 21 21:27:45 EST 1999 stevenj
+ * comment-ized license
+
+ M ./COPYING -19 +21
+
+Sun Nov 21 21:26:49 EST 1999 stevenj
+ * added copyright notices
+
+ M ./arrayh5.c +22
+ M ./arrayh5.h +22
+ M ./h5read.cc +22
+ M ./h5topng.c +22
+ M ./writepng.c +22
+ M ./writepng.h -1 +36
+
+Sun Nov 21 21:22:47 EST 1999 stevenj
+ * fixed clean targets
+
+ M ./Makefile.in -1 +4
+
+Sun Nov 21 21:20:16 EST 1999 stevenj
+ * added MIT license
+
+ A ./COPYING
+
+Sun Nov 21 21:19:54 EST 1999 stevenj
+ * autoconfiscated
+
+ R ./Makefile
+ A ./Makefile.in
+ A ./config.h.in
+ A ./configure.in
+ A ./install-sh
+
+Sun Nov 21 20:49:08 EST 1999 stevenj
+ * deleted extraneous files
+
+ R ./.indent.pro
+ R ./README.writepng
+
+Sun Nov 21 20:48:36 EST 1999 stevenj
+ * added README
+
+ A ./README
+
+Sun Nov 21 20:24:59 EST 1999 stevenj
+ * Initial revision
+
+ A ./.indent.pro
+ A ./.png
+ A ./Makefile
+ A ./README.writepng
+ A ./arrayh5.c
+ A ./arrayh5.h
+ A ./h5read.cc
+ A ./h5topng.c
+ A ./writepng.c
+ A ./writepng.h
Modified: packages/h5utils/branches/upstream/current/INSTALL
===================================================================
--- packages/h5utils/branches/upstream/current/INSTALL 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/INSTALL 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,16 +1,19 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-This file is free documentation; the Free Software Foundation gives
+ This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
-These are generic installation instructions.
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -23,9 +26,9 @@
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -35,20 +38,17 @@
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -67,51 +67,66 @@
all sorts of other programs in order to regenerate files that came
with the distribution.
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
Compilers and Options
=====================
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
-You can compile the package for more than one kind of computer at the
+ You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
Installation Names
==================
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
@@ -125,7 +140,7 @@
Optional Features
=================
-Some packages pay attention to `--enable-FEATURE' options to
+ Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -137,14 +152,46 @@
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -152,14 +199,15 @@
where SYSTEM can have one of these forms:
- OS KERNEL-OS
+ OS
+ KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
@@ -170,9 +218,9 @@
Sharing Defaults
================
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -181,7 +229,7 @@
Defining Variables
==================
-Variables not defined in a site shell script can be set in the
+ Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -190,22 +238,30 @@
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script). Here is a another example:
+overridden in the site shell script).
- /bin/bash ./configure CONFIG_SHELL=/bin/bash
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
-`configure' recognizes the following options to control how it operates.
+ `configure' recognizes the following options to control how it
+operates.
`--help'
`-h'
- Print a summary of the options to `configure', and exit.
+ Print a summary of all of the options to `configure', and exit.
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
@@ -231,6 +287,16 @@
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
Modified: packages/h5utils/branches/upstream/current/Makefile.am
===================================================================
--- packages/h5utils/branches/upstream/current/Makefile.am 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/Makefile.am 2009-06-24 12:26:10 UTC (rev 2312)
@@ -42,9 +42,18 @@
oct_DATA = @H5READ@
h5read.oct: h5read.cc arrayh5.h arrayh5.o
- mkoctfile $(DEFS) $(CPPFLAGS) $(srcdir)/h5read.cc arrayh5.o $(LDFLAGS) $(LIBS)
+ mkoctfile $(DEFS) $(CPPFLAGS) $(srcdir)/h5read.cc $(srcdir)/arrayh5.c $(LDFLAGS) $(LIBS)
clean-hook:
rm -f h5read.oct
nobase_dist_pkgdata_DATA = $(COLORMAPS)
+
+# Somewhat hackish. The "right" way to do this is by a dist-hook target,
+# but then darcs check will fail because it doesn't run in the darcs
+# repository.
+darcs-dist: distdir
+ darcs changes --summary > $(distdir)/ChangeLog
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
Modified: packages/h5utils/branches/upstream/current/Makefile.in
===================================================================
--- packages/h5utils/branches/upstream/current/Makefile.in 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/Makefile.in 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -15,17 +16,12 @@
@SET_MAKE@
-SOURCES = $(h4fromh5_SOURCES) $(h5fromh4_SOURCES) $(h5fromitxt_SOURCES) $(h5fromtxt_SOURCES) $(h5math_SOURCES) $(h5topng_SOURCES) $(h5totxt_SOURCES) $(h5tov5d_SOURCES) $(h5tovtk_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -53,13 +49,13 @@
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = h5topng.1
+CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(octdir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
am__objects_1 = arrayh5.$(OBJEXT) h5utils.$(OBJEXT)
am_h4fromh5_OBJECTS = h4fromh5.$(OBJEXT) arrayh4.$(OBJEXT) \
@@ -93,9 +89,10 @@
am_h5tovtk_OBJECTS = h5tovtk.$(OBJEXT) $(am__objects_1)
h5tovtk_OBJECTS = $(am_h5tovtk_OBJECTS)
h5tovtk_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+DEFAULT_INCLUDES = -I. at am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
+am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
@@ -108,17 +105,30 @@
$(h5fromitxt_SOURCES) $(h5fromtxt_SOURCES) $(h5math_SOURCES) \
$(h5topng_SOURCES) $(h5totxt_SOURCES) $(h5tov5d_SOURCES) \
$(h5tovtk_SOURCES)
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(dist_man_MANS) $(nodist_man_MANS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-nobase_dist_pkgdataDATA_INSTALL = $(install_sh_DATA)
-octDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS) $(nodist_man_MANS)
DATA = $(nobase_dist_pkgdata_DATA) $(oct_DATA)
ETAGS = etags
CTAGS = ctags
@@ -126,16 +136,14 @@
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
+ { test ! -d "$(distdir)" \
+ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr "$(distdir)"; }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
@@ -154,11 +162,13 @@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
+GREP = @GREP@
H4TOH5 = @H4TOH5@
H4_LIBS = @H4_LIBS@
H5READ = @H5READ@
H5TOH4 = @H5TOH4@
H5TOPNG_MAN = @H5TOPNG_MAN@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -168,9 +178,8 @@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
MKOCTFILE = @MKOCTFILE@
MORE_H5UTILS = @MORE_H5UTILS@
MORE_H5UTILS_MANS = @MORE_H5UTILS_MANS@
@@ -191,10 +200,11 @@
V5D_FILES = @V5D_FILES@
V5D_INCLUDES = @V5D_INCLUDES@
VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -202,25 +212,37 @@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
+builddir = @builddir@
datadir = @datadir@
datadir_val = @datadir_val@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
+htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
COLORMAPS = colormaps/autumn colormaps/bluered colormaps/bone \
colormaps/colorcube colormaps/cool colormaps/copper colormaps/flag \
colormaps/gray colormaps/green colormaps/hot colormaps/hsv \
@@ -262,15 +284,15 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -286,21 +308,22 @@
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
@@ -310,24 +333,38 @@
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
- $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
- else :; fi; \
- done
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
- rm -f "$(DESTDIR)$(bindir)/$$f"; \
- done
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
@@ -336,31 +373,31 @@
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
h4fromh5$(EXEEXT): $(h4fromh5_OBJECTS) $(h4fromh5_DEPENDENCIES)
@rm -f h4fromh5$(EXEEXT)
- $(LINK) $(h4fromh5_LDFLAGS) $(h4fromh5_OBJECTS) $(h4fromh5_LDADD) $(LIBS)
+ $(LINK) $(h4fromh5_OBJECTS) $(h4fromh5_LDADD) $(LIBS)
h5fromh4$(EXEEXT): $(h5fromh4_OBJECTS) $(h5fromh4_DEPENDENCIES)
@rm -f h5fromh4$(EXEEXT)
- $(LINK) $(h5fromh4_LDFLAGS) $(h5fromh4_OBJECTS) $(h5fromh4_LDADD) $(LIBS)
+ $(LINK) $(h5fromh4_OBJECTS) $(h5fromh4_LDADD) $(LIBS)
h5fromitxt$(EXEEXT): $(h5fromitxt_OBJECTS) $(h5fromitxt_DEPENDENCIES)
@rm -f h5fromitxt$(EXEEXT)
- $(LINK) $(h5fromitxt_LDFLAGS) $(h5fromitxt_OBJECTS) $(h5fromitxt_LDADD) $(LIBS)
+ $(LINK) $(h5fromitxt_OBJECTS) $(h5fromitxt_LDADD) $(LIBS)
h5fromtxt$(EXEEXT): $(h5fromtxt_OBJECTS) $(h5fromtxt_DEPENDENCIES)
@rm -f h5fromtxt$(EXEEXT)
- $(LINK) $(h5fromtxt_LDFLAGS) $(h5fromtxt_OBJECTS) $(h5fromtxt_LDADD) $(LIBS)
+ $(LINK) $(h5fromtxt_OBJECTS) $(h5fromtxt_LDADD) $(LIBS)
h5math$(EXEEXT): $(h5math_OBJECTS) $(h5math_DEPENDENCIES)
@rm -f h5math$(EXEEXT)
- $(LINK) $(h5math_LDFLAGS) $(h5math_OBJECTS) $(h5math_LDADD) $(LIBS)
+ $(LINK) $(h5math_OBJECTS) $(h5math_LDADD) $(LIBS)
h5topng$(EXEEXT): $(h5topng_OBJECTS) $(h5topng_DEPENDENCIES)
@rm -f h5topng$(EXEEXT)
- $(LINK) $(h5topng_LDFLAGS) $(h5topng_OBJECTS) $(h5topng_LDADD) $(LIBS)
+ $(LINK) $(h5topng_OBJECTS) $(h5topng_LDADD) $(LIBS)
h5totxt$(EXEEXT): $(h5totxt_OBJECTS) $(h5totxt_DEPENDENCIES)
@rm -f h5totxt$(EXEEXT)
- $(LINK) $(h5totxt_LDFLAGS) $(h5totxt_OBJECTS) $(h5totxt_LDADD) $(LIBS)
+ $(LINK) $(h5totxt_OBJECTS) $(h5totxt_LDADD) $(LIBS)
h5tov5d$(EXEEXT): $(h5tov5d_OBJECTS) $(h5tov5d_DEPENDENCIES)
@rm -f h5tov5d$(EXEEXT)
- $(LINK) $(h5tov5d_LDFLAGS) $(h5tov5d_OBJECTS) $(h5tov5d_LDADD) $(LIBS)
+ $(LINK) $(h5tov5d_OBJECTS) $(h5tov5d_LDADD) $(LIBS)
h5tovtk$(EXEEXT): $(h5tovtk_OBJECTS) $(h5tovtk_DEPENDENCIES)
@rm -f h5tovtk$(EXEEXT)
- $(LINK) $(h5tovtk_LDFLAGS) $(h5tovtk_OBJECTS) $(h5tovtk_LDADD) $(LIBS)
+ $(LINK) $(h5tovtk_OBJECTS) $(h5tovtk_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -385,226 +422,245 @@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/writepng.Po at am__quote@
.c.o:
- at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
- at am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
h5tov5d-h5tov5d.o: h5tov5d.c
- at am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5tov5d.o -MD -MP -MF "$(DEPDIR)/h5tov5d-h5tov5d.Tpo" -c -o h5tov5d-h5tov5d.o `test -f 'h5tov5d.c' || echo '$(srcdir)/'`h5tov5d.c; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/h5tov5d-h5tov5d.Tpo" "$(DEPDIR)/h5tov5d-h5tov5d.Po"; else rm -f "$(DEPDIR)/h5tov5d-h5tov5d.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5tov5d.o -MD -MP -MF $(DEPDIR)/h5tov5d-h5tov5d.Tpo -c -o h5tov5d-h5tov5d.o `test -f 'h5tov5d.c' || echo '$(srcdir)/'`h5tov5d.c
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/h5tov5d-h5tov5d.Tpo $(DEPDIR)/h5tov5d-h5tov5d.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='h5tov5d.c' object='h5tov5d-h5tov5d.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o h5tov5d-h5tov5d.o `test -f 'h5tov5d.c' || echo '$(srcdir)/'`h5tov5d.c
h5tov5d-h5tov5d.obj: h5tov5d.c
- at am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5tov5d.obj -MD -MP -MF "$(DEPDIR)/h5tov5d-h5tov5d.Tpo" -c -o h5tov5d-h5tov5d.obj `if test -f 'h5tov5d.c'; then $(CYGPATH_W) 'h5tov5d.c'; else $(CYGPATH_W) '$(srcdir)/h5tov5d.c'; fi`; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/h5tov5d-h5tov5d.Tpo" "$(DEPDIR)/h5tov5d-h5tov5d.Po"; else rm -f "$(DEPDIR)/h5tov5d-h5tov5d.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5tov5d.obj -MD -MP -MF $(DEPDIR)/h5tov5d-h5tov5d.Tpo -c -o h5tov5d-h5tov5d.obj `if test -f 'h5tov5d.c'; then $(CYGPATH_W) 'h5tov5d.c'; else $(CYGPATH_W) '$(srcdir)/h5tov5d.c'; fi`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/h5tov5d-h5tov5d.Tpo $(DEPDIR)/h5tov5d-h5tov5d.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='h5tov5d.c' object='h5tov5d-h5tov5d.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o h5tov5d-h5tov5d.obj `if test -f 'h5tov5d.c'; then $(CYGPATH_W) 'h5tov5d.c'; else $(CYGPATH_W) '$(srcdir)/h5tov5d.c'; fi`
h5tov5d-arrayh5.o: arrayh5.c
- at am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-arrayh5.o -MD -MP -MF "$(DEPDIR)/h5tov5d-arrayh5.Tpo" -c -o h5tov5d-arrayh5.o `test -f 'arrayh5.c' || echo '$(srcdir)/'`arrayh5.c; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/h5tov5d-arrayh5.Tpo" "$(DEPDIR)/h5tov5d-arrayh5.Po"; else rm -f "$(DEPDIR)/h5tov5d-arrayh5.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-arrayh5.o -MD -MP -MF $(DEPDIR)/h5tov5d-arrayh5.Tpo -c -o h5tov5d-arrayh5.o `test -f 'arrayh5.c' || echo '$(srcdir)/'`arrayh5.c
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/h5tov5d-arrayh5.Tpo $(DEPDIR)/h5tov5d-arrayh5.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arrayh5.c' object='h5tov5d-arrayh5.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o h5tov5d-arrayh5.o `test -f 'arrayh5.c' || echo '$(srcdir)/'`arrayh5.c
h5tov5d-arrayh5.obj: arrayh5.c
- at am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-arrayh5.obj -MD -MP -MF "$(DEPDIR)/h5tov5d-arrayh5.Tpo" -c -o h5tov5d-arrayh5.obj `if test -f 'arrayh5.c'; then $(CYGPATH_W) 'arrayh5.c'; else $(CYGPATH_W) '$(srcdir)/arrayh5.c'; fi`; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/h5tov5d-arrayh5.Tpo" "$(DEPDIR)/h5tov5d-arrayh5.Po"; else rm -f "$(DEPDIR)/h5tov5d-arrayh5.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-arrayh5.obj -MD -MP -MF $(DEPDIR)/h5tov5d-arrayh5.Tpo -c -o h5tov5d-arrayh5.obj `if test -f 'arrayh5.c'; then $(CYGPATH_W) 'arrayh5.c'; else $(CYGPATH_W) '$(srcdir)/arrayh5.c'; fi`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/h5tov5d-arrayh5.Tpo $(DEPDIR)/h5tov5d-arrayh5.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arrayh5.c' object='h5tov5d-arrayh5.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o h5tov5d-arrayh5.obj `if test -f 'arrayh5.c'; then $(CYGPATH_W) 'arrayh5.c'; else $(CYGPATH_W) '$(srcdir)/arrayh5.c'; fi`
h5tov5d-h5utils.o: h5utils.c
- at am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5utils.o -MD -MP -MF "$(DEPDIR)/h5tov5d-h5utils.Tpo" -c -o h5tov5d-h5utils.o `test -f 'h5utils.c' || echo '$(srcdir)/'`h5utils.c; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/h5tov5d-h5utils.Tpo" "$(DEPDIR)/h5tov5d-h5utils.Po"; else rm -f "$(DEPDIR)/h5tov5d-h5utils.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5utils.o -MD -MP -MF $(DEPDIR)/h5tov5d-h5utils.Tpo -c -o h5tov5d-h5utils.o `test -f 'h5utils.c' || echo '$(srcdir)/'`h5utils.c
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/h5tov5d-h5utils.Tpo $(DEPDIR)/h5tov5d-h5utils.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='h5utils.c' object='h5tov5d-h5utils.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o h5tov5d-h5utils.o `test -f 'h5utils.c' || echo '$(srcdir)/'`h5utils.c
h5tov5d-h5utils.obj: h5utils.c
- at am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5utils.obj -MD -MP -MF "$(DEPDIR)/h5tov5d-h5utils.Tpo" -c -o h5tov5d-h5utils.obj `if test -f 'h5utils.c'; then $(CYGPATH_W) 'h5utils.c'; else $(CYGPATH_W) '$(srcdir)/h5utils.c'; fi`; \
- at am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/h5tov5d-h5utils.Tpo" "$(DEPDIR)/h5tov5d-h5utils.Po"; else rm -f "$(DEPDIR)/h5tov5d-h5utils.Tpo"; exit 1; fi
+ at am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT h5tov5d-h5utils.obj -MD -MP -MF $(DEPDIR)/h5tov5d-h5utils.Tpo -c -o h5tov5d-h5utils.obj `if test -f 'h5utils.c'; then $(CYGPATH_W) 'h5utils.c'; else $(CYGPATH_W) '$(srcdir)/h5utils.c'; fi`
+ at am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/h5tov5d-h5utils.Tpo $(DEPDIR)/h5tov5d-h5utils.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='h5utils.c' object='h5tov5d-h5utils.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(h5tov5d_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o h5tov5d-h5utils.obj `if test -f 'h5utils.c'; then $(CYGPATH_W) 'h5utils.c'; else $(CYGPATH_W) '$(srcdir)/h5utils.c'; fi`
-uninstall-info-am:
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(dist_man_MANS) $(nodist_man_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS) $(nodist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
uninstall-man1:
@$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
- rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
- done
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS) $(nodist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
install-nobase_dist_pkgdataDATA: $(nobase_dist_pkgdata_DATA)
@$(NORMAL_INSTALL)
- test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
- @$(am__vpath_adj_setup) \
- list='$(nobase_dist_pkgdata_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__vpath_adj) \
- echo " $(nobase_dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
- $(nobase_dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
+ test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
+ @list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+ $(am__nobase_list) | while read dir files; do \
+ xfiles=; for file in $$files; do \
+ if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+ test -z "$$xfiles" || { \
+ test "x$$dir" = x. || { \
+ echo "$(MKDIR_P) '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)/$$dir"; }; \
+ echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
+ $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(pkgdatadir)/$$dir" || exit $$?; }; \
done
uninstall-nobase_dist_pkgdataDATA:
@$(NORMAL_UNINSTALL)
- @$(am__vpath_adj_setup) \
- list='$(nobase_dist_pkgdata_DATA)'; for p in $$list; do \
- $(am__vpath_adj) \
- echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
- done
+ @list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+ $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
install-octDATA: $(oct_DATA)
@$(NORMAL_INSTALL)
- test -z "$(octdir)" || $(mkdir_p) "$(DESTDIR)$(octdir)"
- @list='$(oct_DATA)'; for p in $$list; do \
+ test -z "$(octdir)" || $(MKDIR_P) "$(DESTDIR)$(octdir)"
+ @list='$(oct_DATA)'; test -n "$(octdir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(octDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(octdir)/$$f'"; \
- $(octDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(octdir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(octdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(octdir)" || exit $$?; \
done
uninstall-octDATA:
@$(NORMAL_UNINSTALL)
- @list='$(oct_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(octdir)/$$f'"; \
- rm -f "$(DESTDIR)$(octdir)/$$f"; \
- done
+ @list='$(oct_DATA)'; test -n "$(octdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(octdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(octdir)" && rm -f $$files
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
$(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/. $(distdir)/colormaps
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
@@ -613,6 +669,14 @@
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ $(am__remove_distdir)
+
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
@@ -639,6 +703,10 @@
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
@@ -650,9 +718,11 @@
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
@@ -674,13 +744,15 @@
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
+ @$(am__cd) '$(distuninstallcheck_dir)' \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
@@ -702,7 +774,7 @@
all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h
installdirs:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(octdir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
@@ -724,6 +796,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -746,6 +819,8 @@
html: html-am
+html-am:
+
info: info-am
info-am:
@@ -753,12 +828,30 @@
install-data-am: install-man install-nobase_dist_pkgdataDATA \
install-octDATA
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
install-exec-am: install-binPROGRAMS
+install-html: install-html-am
+
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man: install-man1
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -780,34 +873,47 @@
ps-am:
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man \
+uninstall-am: uninstall-binPROGRAMS uninstall-man \
uninstall-nobase_dist_pkgdataDATA uninstall-octDATA
uninstall-man: uninstall-man1
+.MAKE: all install-am install-strip
+
.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
clean-binPROGRAMS clean-generic clean-noinstPROGRAMS ctags \
- dist dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ \
- dist-zip distcheck distclean distclean-compile \
- distclean-generic distclean-hdr distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-binPROGRAMS install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-man1 \
- install-nobase_dist_pkgdataDATA install-octDATA install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binPROGRAMS uninstall-info-am \
+ dist dist-all dist-bzip2 dist-gzip dist-lzma dist-shar \
+ dist-tarZ dist-xz dist-zip distcheck distclean \
+ distclean-compile distclean-generic distclean-hdr \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-binPROGRAMS install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-nobase_dist_pkgdataDATA install-octDATA \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
uninstall-man uninstall-man1 uninstall-nobase_dist_pkgdataDATA \
uninstall-octDATA
h5read.oct: h5read.cc arrayh5.h arrayh5.o
- mkoctfile $(DEFS) $(CPPFLAGS) $(srcdir)/h5read.cc arrayh5.o $(LDFLAGS) $(LIBS)
+ mkoctfile $(DEFS) $(CPPFLAGS) $(srcdir)/h5read.cc $(srcdir)/arrayh5.c $(LDFLAGS) $(LIBS)
clean-hook:
rm -f h5read.oct
+
+# Somewhat hackish. The "right" way to do this is by a dist-hook target,
+# but then darcs check will fail because it doesn't run in the darcs
+# repository.
+darcs-dist: distdir
+ darcs changes --summary > $(distdir)/ChangeLog
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: packages/h5utils/branches/upstream/current/NEWS
===================================================================
--- packages/h5utils/branches/upstream/current/NEWS 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/NEWS 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,3 +1,31 @@
+h5utils 1.12 (6/12/09)
+
+ * The vertical axis in h5topng is now reversed to correspond to
+ what most people seem to expect: increasing coordinates correspond
+ to "up" and "right" in the image, rather than "down" and "right"
+ in the image as in previous versions.
+
+ * Fixed failure in h5tovtk -2; thanks to Karen Lee for the bug report.
+
+ * Fixed installation of h5read.oct for Octave 3.x.
+
+h5utils 1.11.1 (4/28/08)
+
+ * Fixed failure to find colormap files in h5topng 1.11 (due
+ to changes in autoconf 2.60); thanks to bug report from Jiangjun Zheng.
+
+h5utils 1.11 (4/24/08)
+
+ * h5tovtk no longer reverses the dimensions; thanks to Andreas Wilde
+ for the suggestion.
+
+ * Fix compilation failure with HDF5 1.8.
+
+h5utils 1.10.1 (9/20/06)
+
+ * Fixed build problem on Cygwin due to missing ".exe" extension.
+ Thanks to Ken Hill for the bug report.
+
h5utils 1.10 (9/2/05)
* Added h4fromh5 utility. (NCSA seems to be no longer shipping
Modified: packages/h5utils/branches/upstream/current/aclocal.m4
===================================================================
--- packages/h5utils/branches/upstream/current/aclocal.m4 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/aclocal.m4 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,7 +11,15 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -21,14 +29,31 @@
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.5])])
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -85,14 +110,14 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 7
+# serial 9
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -101,8 +126,11 @@
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -116,15 +144,14 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
+# serial 10
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -152,6 +179,7 @@
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
@@ -180,6 +208,16 @@
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -197,7 +235,17 @@
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -207,18 +255,23 @@
break
fi
;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
none) break ;;
esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -269,61 +322,74 @@
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-#serial 3
+#serial 5
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
-done
+}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -354,14 +420,14 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 12
+# serial 16
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -378,16 +444,20 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.62])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
fi
# test whether we have cygpath
@@ -407,6 +477,9 @@
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -422,8 +495,8 @@
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -431,21 +504,38 @@
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -455,18 +545,19 @@
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
+_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
- $1 | $1:* )
+ $_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -477,7 +568,14 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -504,27 +602,38 @@
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t at _MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
+ AC_SUBST([MAINT])dnl
]
)
@@ -532,13 +641,13 @@
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 4
# AM_MAKE_INCLUDE()
# -----------------
@@ -547,7 +656,7 @@
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo done
+ @echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
@@ -557,24 +666,24 @@
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
@@ -582,16 +691,51 @@
rm -f confinc confmf
])
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+dnl Make sure AC_PROG_CC is never called again, or it will override our
+dnl setting of CC.
+m4_define([AC_PROG_CC],
+ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
+])
+
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 6
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -607,7 +751,15 @@
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
@@ -617,7 +769,7 @@
fi
])
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -625,70 +777,33 @@
# AM_PROG_MKDIR_P
# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 4
# _AM_MANGLE_OPTION(NAME)
# -----------------------
@@ -705,7 +820,7 @@
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
@@ -715,14 +830,14 @@
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
# AM_SANITY_CHECK
# ---------------
@@ -731,16 +846,29 @@
# Just in case
sleep 1
echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
+ set X `ls -t "$srcdir/configure" conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -790,9 +918,28 @@
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
Modified: packages/h5utils/branches/upstream/current/arrayh4.c
===================================================================
--- packages/h5utils/branches/upstream/current/arrayh4.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/arrayh4.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/arrayh4.h
===================================================================
--- packages/h5utils/branches/upstream/current/arrayh4.h 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/arrayh4.h 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 1999, 2000, 2001, 2002 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/arrayh5.c
===================================================================
--- packages/h5utils/branches/upstream/current/arrayh5.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/arrayh5.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2008 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@@ -23,6 +23,9 @@
#include <stdlib.h>
#include <string.h>
+/* don't use new HDF5 1.8 API (which isn't even fully documented yet, grrr) */
+#define H5_USE_16_API 1
+
#include <hdf5.h>
#include "arrayh5.h"
Modified: packages/h5utils/branches/upstream/current/arrayh5.h
===================================================================
--- packages/h5utils/branches/upstream/current/arrayh5.h 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/arrayh5.h 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 1999, 2000, 2001, 2002 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/compile
===================================================================
--- packages/h5utils/branches/upstream/current/compile 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/compile 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,9 +1,10 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
-scriptversion=2005-02-03.08
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009 Free Software
+# Foundation, Inc.
# Written by Tom Tromey <tromey at cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -17,8 +18,7 @@
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -103,13 +103,13 @@
fi
# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
+# Note: use `[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
@@ -138,5 +138,6 @@
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
Modified: packages/h5utils/branches/upstream/current/config.h.in
===================================================================
--- packages/h5utils/branches/upstream/current/config.h.in 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/config.h.in 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,8 +1,14 @@
/* config.h.in. Generated from configure.ac by autoheader. */
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
/* datadir installation prefix */
#undef DATADIR
+/* Define to 1 if you have the <arpa/inet.h> header file. */
+#undef HAVE_ARPA_INET_H
+
/* Define to 1 if you have the <hdf.h> header file. */
#undef HAVE_HDF_H
@@ -48,6 +54,12 @@
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
+/* Define to 1 if the system has the type `uint16_t'. */
+#undef HAVE_UINT16_T
+
+/* Define to 1 if the system has the type `uint32_t'. */
+#undef HAVE_UINT32_T
+
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
@@ -58,6 +70,9 @@
*/
#undef HAVE_VIS5Dp_V5D_H
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
/* Name of package */
#undef PACKAGE
@@ -76,18 +91,23 @@
/* Define to the version of this package. */
#undef PACKAGE_VERSION
-/* The size of a `float', as computed by sizeof. */
+/* The size of `float', as computed by sizeof. */
#undef SIZEOF_FLOAT
-/* The size of a `unsigned long', as computed by sizeof. */
-#undef SIZEOF_UNSIGNED_LONG
-
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
-/* Define to 1 if your processor stores words with the most significant byte
- first (like Motorola and SPARC, unlike Intel and VAX). */
-#undef WORDS_BIGENDIAN
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+ significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+# define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+# undef WORDS_BIGENDIAN
+# endif
+#endif
Modified: packages/h5utils/branches/upstream/current/configure
===================================================================
--- packages/h5utils/branches/upstream/current/configure 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/configure 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,28 +1,85 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for h5utils 1.10.
+# Generated by GNU Autoconf 2.63 for h5utils 1.12.
#
# Report bugs to <stevenj at alum.mit.edu>.
#
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
fi
-DUALCASE=1; export DUALCASE # for MKS sh
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
@@ -31,33 +88,60 @@
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -65,157 +149,391 @@
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# CDPATH.
+$as_unset CDPATH
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
fi
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
+ case $as_dir in
/*)
- if ("$as_dir/$as_base" -c '
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell bug-autoconf at gnu.org about your system,
+ echo including any error possibly output before this message.
+ echo This can help us improve future autoconf versions.
+ echo Configuration will now proceed without shell functions.
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -224,7 +542,28 @@
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -233,90 +572,196 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-# CDPATH.
-$as_unset CDPATH
+exec 7<&0 </dev/null 6>&1
-
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-exec 6>&1
-
#
# Initializations.
#
ac_default_prefix=/usr/local
+ac_clean_files=
ac_config_libobj_dir=.
+LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
# Identity of this package.
PACKAGE_NAME='h5utils'
PACKAGE_TARNAME='h5utils'
-PACKAGE_VERSION='1.10'
-PACKAGE_STRING='h5utils 1.10'
+PACKAGE_VERSION='1.12'
+PACKAGE_STRING='h5utils 1.12'
PACKAGE_BUGREPORT='stevenj at alum.mit.edu'
ac_unique_file="h5topng.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-# include <stdint.h>
-# endif
#endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP H5TOPNG_MAN PNG_LIBS H4TOH5 H5TOH4 H4_LIBS MKOCTFILE OCTAVE H5READ OCT_INSTALL_DIR V5D_FILES V5D_INCLUDES datadir_val MORE_H5UTILS MORE_H5UTILS_MANS LIBOBJS LTLIBOBJS'
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+MORE_H5UTILS_MANS
+MORE_H5UTILS
+datadir_val
+V5D_INCLUDES
+V5D_FILES
+OCT_INSTALL_DIR
+H5READ
+OCTAVE
+MKOCTFILE
+H4_LIBS
+H5TOH4
+H4TOH5
+PNG_LIBS
+H5TOPNG_MAN
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+with_hdf4
+with_octave
+with_v5d
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
@@ -339,34 +784,48 @@
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
ac_prev=
+ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
+ eval $ac_prev=\$ac_option
ac_prev=
continue
fi
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
# Accept the important Cygnus configure options, so we can diagnose typos.
- case $ac_option in
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
@@ -388,33 +847,61 @@
--config-cache | -C)
cache_file=config.cache ;;
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ -datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
-disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
-enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
+ eval enable_$ac_useropt=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -441,6 +928,12 @@
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
@@ -465,13 +958,16 @@
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
-localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
+ | --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -536,6 +1032,16 @@
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
@@ -586,26 +1092,38 @@
ac_init_version=: ;;
-with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
esac
- eval "with_$ac_package='$ac_optarg'" ;;
+ eval with_$ac_useropt=\$ac_optarg ;;
-without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
--x)
# Obsolete; use --with-x.
@@ -625,7 +1143,7 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { echo "$as_me: error: unrecognized option: $ac_option
+ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
@@ -634,17 +1152,16 @@
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
+ eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
@@ -653,31 +1170,39 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
+ { $as_echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+ { (exit 1); exit 1; }; } ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
-done
+fi
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
do
- eval ac_val=$`echo $ac_var`
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
done
# There might be people who depend on the old broken behavior: `$host'
@@ -691,7 +1216,7 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
@@ -704,74 +1229,76 @@
test "$silent" = yes && exec 6>/dev/null
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { $as_echo "$as_me: error: working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
+ if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
- fi
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
- { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
#
# Report the --help message.
@@ -780,7 +1307,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures h5utils 1.10 to adapt to many kinds of systems.
+\`configure' configures h5utils 1.12 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -800,14 +1327,11 @@
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
-_ACEOF
-
- cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
+ [$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
+ [PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
@@ -817,18 +1341,25 @@
For better control, use the options below.
Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/h5utils]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
@@ -842,11 +1373,12 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of h5utils 1.10:";;
+ short | recursive ) echo "Configuration of h5utils 1.12:";;
esac
cat <<\_ACEOF
Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
@@ -867,8 +1399,9 @@
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
@@ -876,120 +1409,88 @@
Report bugs to <stevenj at alum.mit.edu>.
_ACEOF
+ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
ac_builddir=.
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-h5utils configure 1.10
-generated by GNU Autoconf 2.59
+h5utils configure 1.12
+generated by GNU Autoconf 2.63
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
- exit 0
+ exit
fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by h5utils $as_me 1.10, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+It was created by h5utils $as_me 1.12, which was
+generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
_ACEOF
+exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
@@ -1008,7 +1509,7 @@
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
@@ -1020,8 +1521,9 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
+ $as_echo "PATH: $as_dir"
done
+IFS=$as_save_IFS
} >&5
@@ -1043,7 +1545,6 @@
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
-ac_sep=
ac_must_keep_next=false
for ac_pass in 1 2
do
@@ -1054,8 +1555,8 @@
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1076,9 +1577,7 @@
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
+ ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done
@@ -1089,8 +1588,8 @@
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
@@ -1103,20 +1602,35 @@
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
(set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
*)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-}
+ esac |
+ sort
+)
echo
cat <<\_ASBOX
@@ -1127,22 +1641,28 @@
echo
for ac_var in $ac_subst_vars
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
_ASBOX
echo
for ac_var in $ac_subst_files
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
@@ -1154,26 +1674,24 @@
## ----------- ##
_ASBOX
echo
- sed "/^$/d" confdefs.h | sort
+ cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
} >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
- ' 0
+' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
# Predefined preprocessor variables.
@@ -1203,18 +1721,24 @@
# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
fi
-for ac_site_file in $CONFIG_SITE; do
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
@@ -1224,54 +1748,61 @@
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
esac
fi
else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
@@ -1281,18 +1812,15 @@
fi
done
if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; }
fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
@@ -1317,35 +1845,46 @@
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+am__api_version='1.11'
-am__api_version="1.9"
ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
- elif test -f $ac_dir/install.sh; then
+ elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
- elif test -f $ac_dir/shtool; then
+ elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
{ (exit 1); exit 1; }; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -1359,11 +1898,12 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -1382,7 +1922,7 @@
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -1392,30 +1932,43 @@
# program-specific install script used by HP pwplus--don't use.
:
else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
fi
fi
done
done
;;
esac
+
done
+IFS=$as_save_IFS
+rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
- # removed, or if the path is relative.
+ # removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
@@ -1425,21 +1978,38 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
+ set X `ls -t "$srcdir/configure" conftest.file`
fi
rm -f conftest.file
if test "$*" != "X $srcdir/configure conftest.file" \
@@ -1449,9 +2019,9 @@
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1462,81 +2032,209 @@
# Ok.
:
else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
test "$program_prefix" != NONE &&
- program_transform_name="s,^,$program_prefix,;$program_transform_name"
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ $as_echo_n "(cached) " >&6
else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
else
- mkdir_p='$(install_sh) -d'
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
fi
+else
+ STRIP="$ac_cv_prog_STRIP"
fi
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1547,54 +2245,58 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+ { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
test -n "$AWK" && break
done
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
all:
- @echo 'ac_maketemp="$(MAKE)"'
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
rm -f conftest.make
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
SET_MAKE=
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -1607,12 +2309,16 @@
fi
rmdir .tst 2>/dev/null
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
+ fi
fi
# test whether we have cygpath
@@ -1627,7 +2333,7 @@
# Define the identity of the package.
PACKAGE='h5utils'
- VERSION='1.10'
+ VERSION='1.12'
cat >>confdefs.h <<_ACEOF
@@ -1655,96 +2361,6 @@
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- STRIP=$ac_ct_STRIP
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility.
@@ -1758,22 +2374,21 @@
- ac_config_headers="$ac_config_headers config.h"
+ac_config_headers="$ac_config_headers config.h"
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+
+{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
- enableval="$enable_maintainer_mode"
- USE_MAINTAINER_MODE=$enableval
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
else
USE_MAINTAINER_MODE=no
-fi;
- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+fi
-
-if test $USE_MAINTAINER_MODE = yes; then
+ { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
@@ -1794,10 +2409,10 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1808,34 +2423,36 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -1846,38 +2463,49 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
- CC=$ac_ct_CC
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1888,76 +2516,36 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
+
fi
-done
-done
-
fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1969,17 +2557,18 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
@@ -1997,24 +2586,25 @@
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
+ for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2025,38 +2615,40 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
- for ac_prog in cl
+ for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2067,58 +2659,90 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
test -n "$ac_ct_CC" && break
done
- CC=$ac_ct_CC
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
fi
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
cat >conftest.$ac_ext <<_ACEOF
@@ -2137,111 +2761,150 @@
}
_ACEOF
ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link_default") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
;;
- conftest.$ac_ext )
- # This is the source file.
- ;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
break;;
* )
break;;
esac
done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
else
- echo "$as_me: failed program was:" >&5
+ ac_file=''
+fi
+
+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
+$as_echo "$as_me: error: C compiler cannot create executables
See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+ { (exit 77); exit 77; }; }; }
fi
ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-# Check the compiler produces executables we can run. If not, either
+# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
+$as_echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
fi
fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
+# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
@@ -2250,32 +2913,33 @@
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
break;;
* ) break;;
esac
done
else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2293,39 +2957,48 @@
}
_ACEOF
rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2346,50 +3019,54 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_compiler_gnu=no
+ ac_compiler_gnu=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2405,38 +3082,121 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_prog_cc_g=no
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
@@ -2452,12 +3212,12 @@
CFLAGS=
fi
fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+ $as_echo_n "(cached) " >&6
else
- ac_cv_prog_cc_stdc=no
+ ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2491,12 +3251,17 @@
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
+ as 'x'. The following induces an error, until -std is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
+ that's true only with -std. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
@@ -2511,205 +3276,58 @@
return 0;
}
_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:$LINENO: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
*)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2717,60 +3335,58 @@
ac_compiler_gnu=$ac_cv_c_compiler_gnu
DEPDIR="${am__leading_dot}deps"
- ac_config_commands="$ac_config_commands depfiles"
+ac_config_commands="$ac_config_commands depfiles"
am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo done
+ @echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
fi
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
rm -f confinc confmf
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
+ enableval=$enable_dependency_tracking;
+fi
-fi;
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
+ if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
@@ -2780,13 +3396,12 @@
-
depcc="$CC" am_compiler_list=
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
@@ -2811,6 +3426,11 @@
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -2828,7 +3448,17 @@
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -2838,18 +3468,23 @@
break
fi
;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
none) break ;;
esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -2873,13 +3508,11 @@
fi
fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -2890,7 +3523,139 @@
fi
+if test "x$CC" != xcc; then
+ { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
+else
+ { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
+fi
+set dummy $CC; ac_cc=`$as_echo "$2" |
+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.$ac_ext >&5'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+ rm -f conftest2.*
+ if { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+ { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+
+cat >>confdefs.h <<\_ACEOF
+#define NO_MINUS_C_MINUS_O 1
+_ACEOF
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+
+
+
# Checks for header files.
ac_ext=c
@@ -2898,15 +3663,15 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
# Double quotes because CPP needs to be expanded
for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
@@ -2933,35 +3698,35 @@
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2971,34 +3736,34 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
@@ -3016,8 +3781,8 @@
else
ac_cv_prog_CPP=$CPP
fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
@@ -3040,35 +3805,35 @@
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -3078,34 +3843,34 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
@@ -3114,11 +3879,13 @@
if $ac_preproc_ok; then
:
else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
ac_ext=c
@@ -3128,25 +3895,144 @@
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+ $as_echo_n "(cached) " >&6
else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+else
+ ac_cv_path_GREP=$GREP
fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+
+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -3168,36 +4054,33 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_header_stdc=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_header_stdc=no
+ ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
@@ -3252,6 +4135,7 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ctype.h>
+#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -3271,36 +4155,50 @@
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
|| toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
+ return 2;
+ return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
:
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
+
+
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -3311,10 +4209,10 @@
-echo "$as_me:$LINENO: checking for sin in -lm" >&5
-echo $ECHO_N "checking for sin in -lm... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for sin in -lm" >&5
+$as_echo_n "checking for sin in -lm... " >&6; }
if test "${ac_cv_lib_m_sin+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lm $LIBS"
@@ -3325,57 +4223,58 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char sin ();
int
main ()
{
-sin ();
+return sin ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_m_sin=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_m_sin=no
+ ac_cv_lib_m_sin=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_m_sin" >&5
-echo "${ECHO_T}$ac_cv_lib_m_sin" >&6
-if test $ac_cv_lib_m_sin = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_sin" >&5
+$as_echo "$ac_cv_lib_m_sin" >&6; }
+if test "x$ac_cv_lib_m_sin" = x""yes; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBM 1
_ACEOF
@@ -3387,11 +4286,11 @@
for ac_func in snprintf
do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
+$as_echo_n "checking for $ac_func... " >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -3416,71 +4315,70 @@
#undef $ac_func
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
-{
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+#if defined __stub_$ac_func || defined __stub___$ac_func
choke me
-#else
-char (*f) () = $ac_func;
#endif
-#ifdef __cplusplus
-}
-#endif
int
main ()
{
-return f != $ac_func;
+return $ac_func ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
eval "$as_ac_var=yes"
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_var=no"
+ eval "$as_ac_var=no"
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
+ac_res=`eval 'as_val=${'$as_ac_var'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_var'}
+ $as_echo "$as_val"'`
+ if test "x$as_val" = x""yes; then
cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
fi
@@ -3507,10 +4405,10 @@
H5TOPNG=yes
PNG_LIBS=""
-echo "$as_me:$LINENO: checking for inflate in -lz" >&5
-echo $ECHO_N "checking for inflate in -lz... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for inflate in -lz" >&5
+$as_echo_n "checking for inflate in -lz... " >&6; }
if test "${ac_cv_lib_z_inflate+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lz $LIBS"
@@ -3521,57 +4419,58 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char inflate ();
int
main ()
{
-inflate ();
+return inflate ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_z_inflate=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_z_inflate=no
+ ac_cv_lib_z_inflate=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflate" >&5
-echo "${ECHO_T}$ac_cv_lib_z_inflate" >&6
-if test $ac_cv_lib_z_inflate = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflate" >&5
+$as_echo "$ac_cv_lib_z_inflate" >&6; }
+if test "x$ac_cv_lib_z_inflate" = x""yes; then
ok=yes
else
ok=no
@@ -3580,10 +4479,10 @@
if test "$ok" = "yes"; then
LIBS="-lz $LIBS"
- echo "$as_me:$LINENO: checking for png_create_write_struct in -lpng" >&5
-echo $ECHO_N "checking for png_create_write_struct in -lpng... $ECHO_C" >&6
+ { $as_echo "$as_me:$LINENO: checking for png_create_write_struct in -lpng" >&5
+$as_echo_n "checking for png_create_write_struct in -lpng... " >&6; }
if test "${ac_cv_lib_png_png_create_write_struct+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lpng $LIBS"
@@ -3594,57 +4493,58 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char png_create_write_struct ();
int
main ()
{
-png_create_write_struct ();
+return png_create_write_struct ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_png_png_create_write_struct=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_png_png_create_write_struct=no
+ ac_cv_lib_png_png_create_write_struct=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_png_png_create_write_struct" >&5
-echo "${ECHO_T}$ac_cv_lib_png_png_create_write_struct" >&6
-if test $ac_cv_lib_png_png_create_write_struct = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_png_png_create_write_struct" >&5
+$as_echo "$ac_cv_lib_png_png_create_write_struct" >&6; }
+if test "x$ac_cv_lib_png_png_create_write_struct" = x""yes; then
ok=yes
else
ok=no
@@ -3653,18 +4553,18 @@
if test "$ok" = "yes"; then
PNG_LIBS="-lpng"
else
- { echo "$as_me:$LINENO: WARNING: can't find libpng: won't be able to compile h5topng" >&5
-echo "$as_me: WARNING: can't find libpng: won't be able to compile h5topng" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: can't find libpng: won't be able to compile h5topng" >&5
+$as_echo "$as_me: WARNING: can't find libpng: won't be able to compile h5topng" >&2;}
H5TOPNG=no
fi
else
- { echo "$as_me:$LINENO: WARNING: can't find libz: won't be able to compile h5topng" >&5
-echo "$as_me: WARNING: can't find libz: won't be able to compile h5topng" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: can't find libz: won't be able to compile h5topng" >&5
+$as_echo "$as_me: WARNING: can't find libz: won't be able to compile h5topng" >&2;}
H5TOPNG=no
fi
if test $H5TOPNG = yes; then
- MORE_H5UTILS="h5topng $MORE_H5UTILS"
+ MORE_H5UTILS="h5topng\$(EXEEXT) $MORE_H5UTILS"
H5TOPNG_MAN=h5topng.1
fi
@@ -3673,10 +4573,10 @@
###########################################################################
-echo "$as_me:$LINENO: checking for evaluator_get_variables in -lmatheval" >&5
-echo $ECHO_N "checking for evaluator_get_variables in -lmatheval... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for evaluator_get_variables in -lmatheval" >&5
+$as_echo_n "checking for evaluator_get_variables in -lmatheval... " >&6; }
if test "${ac_cv_lib_matheval_evaluator_get_variables+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lmatheval $LIBS"
@@ -3687,57 +4587,58 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char evaluator_get_variables ();
int
main ()
{
-evaluator_get_variables ();
+return evaluator_get_variables ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_matheval_evaluator_get_variables=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_matheval_evaluator_get_variables=no
+ ac_cv_lib_matheval_evaluator_get_variables=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_matheval_evaluator_get_variables" >&5
-echo "${ECHO_T}$ac_cv_lib_matheval_evaluator_get_variables" >&6
-if test $ac_cv_lib_matheval_evaluator_get_variables = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_matheval_evaluator_get_variables" >&5
+$as_echo "$ac_cv_lib_matheval_evaluator_get_variables" >&6; }
+if test "x$ac_cv_lib_matheval_evaluator_get_variables" = x""yes; then
H5MATH=yes
else
H5MATH=no
@@ -3745,11 +4646,11 @@
if test $H5MATH = yes; then
- MORE_H5UTILS="h5math $MORE_H5UTILS"
+ MORE_H5UTILS="h5math\$(EXEEXT) $MORE_H5UTILS"
MORE_H5UTILS_MANS="h5math.1 $MORE_H5UTILS_MANS"
else
- { echo "$as_me:$LINENO: WARNING: can't find libmatheval: won't be able to compile h5math" >&5
-echo "$as_me: WARNING: can't find libmatheval: won't be able to compile h5math" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: can't find libmatheval: won't be able to compile h5math" >&5
+$as_echo "$as_me: WARNING: can't find libmatheval: won't be able to compile h5math" >&2;}
fi
###########################################################################
@@ -3758,10 +4659,10 @@
# thus don't have the superior h4toh5 utility. Similarly for h5toh4.
# Extract the first word of "h4toh5", so it can be a program name with args.
set dummy h4toh5; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_H4TOH5+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$H4TOH5"; then
ac_cv_prog_H4TOH5="$H4TOH5" # Let the user override the test.
@@ -3772,31 +4673,33 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_H4TOH5="h4toh5"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
H4TOH5=$ac_cv_prog_H4TOH5
if test -n "$H4TOH5"; then
- echo "$as_me:$LINENO: result: $H4TOH5" >&5
-echo "${ECHO_T}$H4TOH5" >&6
+ { $as_echo "$as_me:$LINENO: result: $H4TOH5" >&5
+$as_echo "$H4TOH5" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
# Extract the first word of "h5toh4", so it can be a program name with args.
set dummy h5toh4; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_H5TOH4+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$H5TOH4"; then
ac_cv_prog_H5TOH4="$H5TOH4" # Let the user override the test.
@@ -3807,34 +4710,36 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_H5TOH4="h5toh4"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
H5TOH4=$ac_cv_prog_H5TOH4
if test -n "$H5TOH4"; then
- echo "$as_me:$LINENO: result: $H5TOH4" >&5
-echo "${ECHO_T}$H5TOH4" >&6
+ { $as_echo "$as_me:$LINENO: result: $H5TOH4" >&5
+$as_echo "$H5TOH4" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
-# Check whether --with-hdf4 or --without-hdf4 was given.
+
+# Check whether --with-hdf4 was given.
if test "${with_hdf4+set}" = set; then
- withval="$with_hdf4"
- ok=$withval
+ withval=$with_hdf4; ok=$withval
else
ok=maybe
-fi;
+fi
+
if test "x$ok" = xyes; then
H4TOH5=""
H5TOH4=""
@@ -3845,10 +4750,10 @@
HDF4=no
if test "x$H4TOH5" != xh4toh5 -o "x$H5TOH4" != xh5toh4; then
- echo "$as_me:$LINENO: checking for jpeg_start_compress in -ljpeg" >&5
-echo $ECHO_N "checking for jpeg_start_compress in -ljpeg... $ECHO_C" >&6
+ { $as_echo "$as_me:$LINENO: checking for jpeg_start_compress in -ljpeg" >&5
+$as_echo_n "checking for jpeg_start_compress in -ljpeg... " >&6; }
if test "${ac_cv_lib_jpeg_jpeg_start_compress+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ljpeg $LIBS"
@@ -3859,61 +4764,62 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char jpeg_start_compress ();
int
main ()
{
-jpeg_start_compress ();
+return jpeg_start_compress ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_jpeg_jpeg_start_compress=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_jpeg_jpeg_start_compress=no
+ ac_cv_lib_jpeg_jpeg_start_compress=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_jpeg_jpeg_start_compress" >&5
-echo "${ECHO_T}$ac_cv_lib_jpeg_jpeg_start_compress" >&6
-if test $ac_cv_lib_jpeg_jpeg_start_compress = yes; then
- echo "$as_me:$LINENO: checking for DFSDgetdata in -ldf" >&5
-echo $ECHO_N "checking for DFSDgetdata in -ldf... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_jpeg_jpeg_start_compress" >&5
+$as_echo "$ac_cv_lib_jpeg_jpeg_start_compress" >&6; }
+if test "x$ac_cv_lib_jpeg_jpeg_start_compress" = x""yes; then
+ { $as_echo "$as_me:$LINENO: checking for DFSDgetdata in -ldf" >&5
+$as_echo_n "checking for DFSDgetdata in -ldf... " >&6; }
if test "${ac_cv_lib_df_DFSDgetdata+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldf -ljpeg $LIBS"
@@ -3924,76 +4830,77 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char DFSDgetdata ();
int
main ()
{
-DFSDgetdata ();
+return DFSDgetdata ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_df_DFSDgetdata=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_df_DFSDgetdata=no
+ ac_cv_lib_df_DFSDgetdata=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_df_DFSDgetdata" >&5
-echo "${ECHO_T}$ac_cv_lib_df_DFSDgetdata" >&6
-if test $ac_cv_lib_df_DFSDgetdata = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_df_DFSDgetdata" >&5
+$as_echo "$ac_cv_lib_df_DFSDgetdata" >&6; }
+if test "x$ac_cv_lib_df_DFSDgetdata" = x""yes; then
H4_LIBS="-ldf -ljpeg"; HDF4=yes
else
- { echo "$as_me:$LINENO: WARNING: can't find libdf (HDF4): won't be able to compile h5fromh4 or h4fromh5" >&5
-echo "$as_me: WARNING: can't find libdf (HDF4): won't be able to compile h5fromh4 or h4fromh5" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: can't find libdf (HDF4): won't be able to compile h5fromh4 or h4fromh5" >&5
+$as_echo "$as_me: WARNING: can't find libdf (HDF4): won't be able to compile h5fromh4 or h4fromh5" >&2;}
fi
else
- { echo "$as_me:$LINENO: WARNING: can't find libjpeg: won't be able to compile h5fromh4 or h4fromh5" >&5
-echo "$as_me: WARNING: can't find libjpeg: won't be able to compile h5fromh4 or h4fromh5" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: can't find libjpeg: won't be able to compile h5fromh4 or h4fromh5" >&5
+$as_echo "$as_me: WARNING: can't find libjpeg: won't be able to compile h5fromh4 or h4fromh5" >&2;}
fi
if test $HDF4 = yes; then
if test "x$H4TOH5" != xh4toh5; then
- MORE_H5UTILS="h5fromh4 $MORE_H5UTILS"
+ MORE_H5UTILS="h5fromh4\$(EXEEXT) $MORE_H5UTILS"
MORE_H5UTILS_MANS="h5fromh4.1 $MORE_H5UTILS_MANS"
fi
if test "x$H5TOH4" != xh5toh4; then
- MORE_H5UTILS="h4fromh5 $MORE_H5UTILS"
+ MORE_H5UTILS="h4fromh5\$(EXEEXT) $MORE_H5UTILS"
# MORE_H5UTILS_MANS="h4fromh5.1 $MORE_H5UTILS_MANS"
fi
fi
@@ -4011,11 +4918,11 @@
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
inttypes.h stdint.h unistd.h
do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -4028,41 +4935,42 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
eval "$as_ac_Header=yes"
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_Header=no"
+ eval "$as_ac_Header=no"
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ if test "x$as_val" = x""yes; then
cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
@@ -4074,19 +4982,21 @@
for ac_header in hdf.h hdf/hdf.h
do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
+$as_echo_n "checking $ac_header usability... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4097,41 +5007,38 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
+$as_echo_n "checking $ac_header presence... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4140,81 +5047,83 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
## ----------------------------------- ##
## Report this to stevenj at alum.mit.edu ##
## ----------------------------------- ##
_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+as_val=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ if test "x$as_val" = x""yes; then
cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
@@ -4226,10 +5135,10 @@
###########################################################################
-echo "$as_me:$LINENO: checking for H5Fopen in -lhdf5" >&5
-echo $ECHO_N "checking for H5Fopen in -lhdf5... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for H5Fopen in -lhdf5" >&5
+$as_echo_n "checking for H5Fopen in -lhdf5... " >&6; }
if test "${ac_cv_lib_hdf5_H5Fopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lhdf5 $LIBS"
@@ -4240,61 +5149,62 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char H5Fopen ();
int
main ()
{
-H5Fopen ();
+return H5Fopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_hdf5_H5Fopen=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_hdf5_H5Fopen=no
+ ac_cv_lib_hdf5_H5Fopen=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_hdf5_H5Fopen" >&5
-echo "${ECHO_T}$ac_cv_lib_hdf5_H5Fopen" >&6
-if test $ac_cv_lib_hdf5_H5Fopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_hdf5_H5Fopen" >&5
+$as_echo "$ac_cv_lib_hdf5_H5Fopen" >&6; }
+if test "x$ac_cv_lib_hdf5_H5Fopen" = x""yes; then
LIBS="-lhdf5 $LIBS"
else
- { { echo "$as_me:$LINENO: error: hdf5 libraries are required for compilation" >&5
-echo "$as_me: error: hdf5 libraries are required for compilation" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: hdf5 libraries are required for compilation" >&5
+$as_echo "$as_me: error: hdf5 libraries are required for compilation" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -4302,14 +5212,14 @@
###########################################################################
-# Check whether --with-octave or --without-octave was given.
+# Check whether --with-octave was given.
if test "${with_octave+set}" = set; then
- withval="$with_octave"
- ok=$withval
+ withval=$with_octave; ok=$withval
else
ok=yes
-fi;
+fi
+
H5READ=""
OCT_INSTALL_DIR=""
@@ -4318,10 +5228,10 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_MKOCTFILE+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$MKOCTFILE"; then
ac_cv_prog_MKOCTFILE="$MKOCTFILE" # Let the user override the test.
@@ -4332,42 +5242,44 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_MKOCTFILE="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
MKOCTFILE=$ac_cv_prog_MKOCTFILE
if test -n "$MKOCTFILE"; then
- echo "$as_me:$LINENO: result: $MKOCTFILE" >&5
-echo "${ECHO_T}$MKOCTFILE" >&6
+ { $as_echo "$as_me:$LINENO: result: $MKOCTFILE" >&5
+$as_echo "$MKOCTFILE" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
test -n "$MKOCTFILE" && break
done
test -n "$MKOCTFILE" || MKOCTFILE="echo"
if test "$MKOCTFILE" = "echo"; then
- { echo "$as_me:$LINENO: WARNING: can't find mkoctfile: won't be able to compile h5read.oct" >&5
-echo "$as_me: WARNING: can't find mkoctfile: won't be able to compile h5read.oct" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: can't find mkoctfile: won't be able to compile h5read.oct" >&5
+$as_echo "$as_me: WARNING: can't find mkoctfile: won't be able to compile h5read.oct" >&2;}
else
# try to find installation directory
for ac_prog in octave
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_OCTAVE+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$OCTAVE"; then
ac_cv_prog_OCTAVE="$OCTAVE" # Let the user override the test.
@@ -4378,41 +5290,46 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_OCTAVE="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
OCTAVE=$ac_cv_prog_OCTAVE
if test -n "$OCTAVE"; then
- echo "$as_me:$LINENO: result: $OCTAVE" >&5
-echo "${ECHO_T}$OCTAVE" >&6
+ { $as_echo "$as_me:$LINENO: result: $OCTAVE" >&5
+$as_echo "$OCTAVE" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
+
test -n "$OCTAVE" && break
done
test -n "$OCTAVE" || OCTAVE="echo"
- echo "$as_me:$LINENO: checking where octave plugins go" >&5
-echo $ECHO_N "checking where octave plugins go... $ECHO_C" >&6
- OCT_INSTALL_DIR=`echo "DEFAULT_LOADPATH" | $OCTAVE -q | tr ':' '\n' | grep "site/oct" | head -1`
+ { $as_echo "$as_me:$LINENO: checking where octave plugins go" >&5
+$as_echo_n "checking where octave plugins go... " >&6; }
+ OCT_INSTALL_DIR=`echo "path" | $OCTAVE -q 2> /dev/null | grep "/oct/" | head -1`
+ if test -z "$OCT_INSTALL_DIR"; then
+ OCT_INSTALL_DIR=`echo "DEFAULT_LOADPATH" | $OCTAVE -q 2> /dev/null | tr ':' '\n' | grep "site/oct" | head -1`
+ fi
if test -n "$OCT_INSTALL_DIR"; then
- echo "$as_me:$LINENO: result: $OCT_INSTALL_DIR" >&5
-echo "${ECHO_T}$OCT_INSTALL_DIR" >&6
+ { $as_echo "$as_me:$LINENO: result: $OCT_INSTALL_DIR" >&5
+$as_echo "$OCT_INSTALL_DIR" >&6; }
H5READ=h5read.oct
else
- echo "$as_me:$LINENO: result: unknown" >&5
-echo "${ECHO_T}unknown" >&6
- { echo "$as_me:$LINENO: WARNING: can't find where to install octave plugins: won't be able to compile h5read.oct" >&5
-echo "$as_me: WARNING: can't find where to install octave plugins: won't be able to compile h5read.oct" >&2;}
+ { $as_echo "$as_me:$LINENO: result: unknown" >&5
+$as_echo "unknown" >&6; }
+ { $as_echo "$as_me:$LINENO: WARNING: can't find where to install octave plugins: won't be able to compile h5read.oct" >&5
+$as_echo "$as_me: WARNING: can't find where to install octave plugins: won't be able to compile h5read.oct" >&2;}
fi
fi
fi
@@ -4423,21 +5340,21 @@
###########################################################################
-# Check whether --with-v5d or --without-v5d was given.
+# Check whether --with-v5d was given.
if test "${with_v5d+set}" = set; then
- withval="$with_v5d"
- ok=$withval
+ withval=$with_v5d; ok=$withval
else
ok=yes
-fi;
+fi
+
H5TOV5D=no
V5D_FILES=""
V5D_INCLUDES=""
if test "$ok" = "yes"; then
- echo "$as_me:$LINENO: checking for v5dCreate in -lv5d" >&5
-echo $ECHO_N "checking for v5dCreate in -lv5d... $ECHO_C" >&6
+ { $as_echo "$as_me:$LINENO: checking for v5dCreate in -lv5d" >&5
+$as_echo_n "checking for v5dCreate in -lv5d... " >&6; }
if test "${ac_cv_lib_v5d_v5dCreate+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lv5d $LIBS"
@@ -4448,76 +5365,79 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char v5dCreate ();
int
main ()
{
-v5dCreate ();
+return v5dCreate ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_lib_v5d_v5dCreate=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_v5d_v5dCreate=no
+ ac_cv_lib_v5d_v5dCreate=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_v5d_v5dCreate" >&5
-echo "${ECHO_T}$ac_cv_lib_v5d_v5dCreate" >&6
-if test $ac_cv_lib_v5d_v5dCreate = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_v5d_v5dCreate" >&5
+$as_echo "$ac_cv_lib_v5d_v5dCreate" >&6; }
+if test "x$ac_cv_lib_v5d_v5dCreate" = x""yes; then
V5D_FILES="-lv5d"; H5TOV5D=yes
fi
for ac_header in vis5d/v5d.h
do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
+$as_echo_n "checking $ac_header usability... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4528,41 +5448,38 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
+$as_echo_n "checking $ac_header presence... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4571,81 +5488,83 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
## ----------------------------------- ##
## Report this to stevenj at alum.mit.edu ##
## ----------------------------------- ##
_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+as_val=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ if test "x$as_val" = x""yes; then
cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
@@ -4653,17 +5572,17 @@
done
if test "${ac_cv_header_vis5dp_v5d_h+set}" = set; then
- echo "$as_me:$LINENO: checking for vis5d+/v5d.h" >&5
-echo $ECHO_N "checking for vis5d+/v5d.h... $ECHO_C" >&6
+ { $as_echo "$as_me:$LINENO: checking for vis5d+/v5d.h" >&5
+$as_echo_n "checking for vis5d+/v5d.h... " >&6; }
if test "${ac_cv_header_vis5dp_v5d_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_vis5dp_v5d_h" >&5
-echo "${ECHO_T}$ac_cv_header_vis5dp_v5d_h" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_vis5dp_v5d_h" >&5
+$as_echo "$ac_cv_header_vis5dp_v5d_h" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking vis5d+/v5d.h usability" >&5
-echo $ECHO_N "checking vis5d+/v5d.h usability... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking vis5d+/v5d.h usability" >&5
+$as_echo_n "checking vis5d+/v5d.h usability... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4674,41 +5593,38 @@
#include <vis5d+/v5d.h>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
# Is the header present?
-echo "$as_me:$LINENO: checking vis5d+/v5d.h presence" >&5
-echo $ECHO_N "checking vis5d+/v5d.h presence... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking vis5d+/v5d.h presence" >&5
+$as_echo_n "checking vis5d+/v5d.h presence... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4717,79 +5633,77 @@
/* end confdefs.h. */
#include <vis5d+/v5d.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: proceeding with the compiler's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: present but cannot be compiled" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: vis5d+/v5d.h: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: proceeding with the preprocessor's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: vis5d+/v5d.h: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: vis5d+/v5d.h: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
## ----------------------------------- ##
## Report this to stevenj at alum.mit.edu ##
## ----------------------------------- ##
_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-echo "$as_me:$LINENO: checking for vis5d+/v5d.h" >&5
-echo $ECHO_N "checking for vis5d+/v5d.h... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for vis5d+/v5d.h" >&5
+$as_echo_n "checking for vis5d+/v5d.h... " >&6; }
if test "${ac_cv_header_vis5dp_v5d_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_cv_header_vis5dp_v5d_h=$ac_header_preproc
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_vis5dp_v5d_h" >&5
-echo "${ECHO_T}$ac_cv_header_vis5dp_v5d_h" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_vis5dp_v5d_h" >&5
+$as_echo "$ac_cv_header_vis5dp_v5d_h" >&6; }
fi
-if test $ac_cv_header_vis5dp_v5d_h = yes; then
+if test "x$ac_cv_header_vis5dp_v5d_h" = x""yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_VIS5Dp_V5D_H 1
@@ -4799,8 +5713,8 @@
elif test "$ok" != "no"; then
- echo "$as_me:$LINENO: checking for Vis5d object files and headers" >&5
-echo $ECHO_N "checking for Vis5d object files and headers... $ECHO_C" >&6
+ { $as_echo "$as_me:$LINENO: checking for Vis5d object files and headers" >&5
+$as_echo_n "checking for Vis5d object files and headers... " >&6; }
if test -r "$ok/src/v5d.o" -a -r "$ok/src/binio.o" -a -r "$ok/src/v5d.h" -a -r "$ok/src/binio.h"; then
V5D_FILES="$ok/src/v5d.o $ok/src/binio.o"
V5D_INCLUDES="-I$ok/src"
@@ -4809,19 +5723,19 @@
V5D_INCLUDES="-I$ok"
fi
if test -z "$V5D_FILES"; then
- echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
- { { echo "$as_me:$LINENO: error: couldn't read Vis5D object files in $ok" >&5
-echo "$as_me: error: couldn't read Vis5D object files in $ok" >&2;}
+ { $as_echo "$as_me:$LINENO: result: not found" >&5
+$as_echo "not found" >&6; }
+ { { $as_echo "$as_me:$LINENO: error: couldn't read Vis5D object files in $ok" >&5
+$as_echo "$as_me: error: couldn't read Vis5D object files in $ok" >&2;}
{ (exit 1); exit 1; }; }
else
- echo "$as_me:$LINENO: result: found" >&5
-echo "${ECHO_T}found" >&6
+ { $as_echo "$as_me:$LINENO: result: found" >&5
+$as_echo "found" >&6; }
fi
H5TOV5D=yes
fi
if test $H5TOV5D = yes; then
- MORE_H5UTILS="h5tov5d $MORE_H5UTILS"
+ MORE_H5UTILS="h5tov5d\$(EXEEXT) $MORE_H5UTILS"
MORE_H5UTILS_MANS="h5tov5d.1 $MORE_H5UTILS_MANS"
fi
@@ -4830,21 +5744,26 @@
###########################################################################
-for ac_header in netinet/in.h
+
+
+
+for ac_header in arpa/inet.h netinet/in.h stdint.h inttypes.h
do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
+$as_echo_n "checking $ac_header usability... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4855,41 +5774,38 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
+$as_echo_n "checking $ac_header presence... " >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4898,151 +5814,129 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
## ----------------------------------- ##
## Report this to stevenj at alum.mit.edu ##
## ----------------------------------- ##
_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+as_val=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ if test "x$as_val" = x""yes; then
cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
-
-echo "$as_me:$LINENO: checking for htons" >&5
-echo $ECHO_N "checking for htons... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for uint16_t" >&5
+$as_echo_n "checking for uint16_t... " >&6; }
+if test "${ac_cv_type_uint16_t+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_type_uint16_t=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
+$ac_includes_default
int
main ()
{
-unsigned short i; htons(i);
+if (sizeof (uint16_t))
+ return 0;
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- htons=yes
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_HTONS 1
-_ACEOF
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-htons=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $htons" >&5
-echo "${ECHO_T}$htons" >&6
-
-echo "$as_me:$LINENO: checking for unsigned long" >&5
-echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6
-if test "${ac_cv_type_unsigned_long+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5053,158 +5947,64 @@
int
main ()
{
-if ((unsigned long *) 0)
- return 0;
-if (sizeof (unsigned long))
- return 0;
+if (sizeof ((uint16_t)))
+ return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_unsigned_long=yes
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_unsigned_long=no
+ ac_cv_type_uint16_t=yes
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long" >&5
-echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6
-echo "$as_me:$LINENO: checking size of unsigned long" >&5
-echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6
-if test "${ac_cv_sizeof_unsigned_long+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- if test "$ac_cv_type_unsigned_long" = yes; then
- # The cast to unsigned long works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= 0)];
-test_array [0] = 0
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)];
-test_array [0] = 0
- ;
- return 0;
-}
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_uint16_t" >&5
+$as_echo "$ac_cv_type_uint16_t" >&6; }
+if test "x$ac_cv_type_uint16_t" = x""yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_UINT16_T 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- done
+{ $as_echo "$as_me:$LINENO: checking for uint32_t" >&5
+$as_echo_n "checking for uint32_t... " >&6; }
+if test "${ac_cv_type_uint32_t+set}" = set; then
+ $as_echo_n "(cached) " >&6
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+ ac_cv_type_uint32_t=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5215,38 +6015,31 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) < 0)];
-test_array [0] = 0
-
+if (sizeof (uint32_t))
+ return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -5256,269 +6049,130 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= $ac_mid)];
-test_array [0] = 0
-
+if (sizeof ((uint32_t)))
+ return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+ ac_cv_type_uint32_t=yes
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- done
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo= ac_hi=
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)];
-test_array [0] = 0
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_uint32_t" >&5
+$as_echo "$ac_cv_type_uint32_t" >&6; }
+if test "x$ac_cv_type_uint32_t" = x""yes; then
- ;
- return 0;
-}
+cat >>confdefs.h <<_ACEOF
+#define HAVE_UINT32_T 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_unsigned_long=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
-esac
-else
- if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-long longval () { return (long) (sizeof (unsigned long)); }
-unsigned long ulongval () { return (long) (sizeof (unsigned long)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- exit (1);
- if (((long) (sizeof (unsigned long))) < 0)
- {
- long i = longval ();
- if (i != ((long) (sizeof (unsigned long))))
- exit (1);
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long i = ulongval ();
- if (i != ((long) (sizeof (unsigned long))))
- exit (1);
- fprintf (f, "%lu\n", i);
- }
- exit (ferror (f) || fclose (f) != 0);
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_unsigned_long=`cat conftest.val`
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
- ac_cv_sizeof_unsigned_long=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5
-echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
-_ACEOF
-echo "$as_me:$LINENO: checking for float" >&5
-echo $ECHO_N "checking for float... $ECHO_C" >&6
-if test "${ac_cv_type_float+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
+{ $as_echo "$as_me:$LINENO: checking for htons" >&5
+$as_echo_n "checking for htons... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-$ac_includes_default
+#if defined(HAVE_ARPA_INET_H)
+#include <arpa/inet.h>
+#elif defined(HAVE_NETINET_IN_H)
+#include <netinet/in.h>
+#endif
int
main ()
{
-if ((float *) 0)
- return 0;
-if (sizeof (float))
- return 0;
+unsigned short i; htons(i);
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_float=yes
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
+ htons=yes
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_HTONS 1
+_ACEOF
+
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_float=no
+ htons=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_float" >&5
-echo "${ECHO_T}$ac_cv_type_float" >&6
-echo "$as_me:$LINENO: checking size of float" >&5
-echo $ECHO_N "checking size of float... $ECHO_C" >&6
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $htons" >&5
+$as_echo "$htons" >&6; }
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:$LINENO: checking size of float" >&5
+$as_echo_n "checking size of float... " >&6; }
if test "${ac_cv_sizeof_float+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
- if test "$ac_cv_type_float" = yes; then
- # The cast to unsigned long works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
@@ -5531,7 +6185,7 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (float))) >= 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (float))) >= 0)];
test_array [0] = 0
;
@@ -5539,27 +6193,23 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
@@ -5572,7 +6222,7 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (float))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (float))) <= $ac_mid)];
test_array [0] = 0
;
@@ -5580,46 +6230,43 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
+ ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -5629,7 +6276,7 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (float))) < 0)];
+static int test_array [1 - 2 * !(((long int) (sizeof (float))) < 0)];
test_array [0] = 0
;
@@ -5637,27 +6284,23 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
@@ -5670,7 +6313,7 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (float))) >= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (float))) >= $ac_mid)];
test_array [0] = 0
;
@@ -5678,50 +6321,49 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+ ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo= ac_hi=
+ ac_lo= ac_hi=
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
@@ -5735,7 +6377,7 @@
int
main ()
{
-static int test_array [1 - 2 * !(((long) (sizeof (float))) <= $ac_mid)];
+static int test_array [1 - 2 * !(((long int) (sizeof (float))) <= $ac_mid)];
test_array [0] = 0
;
@@ -5743,52 +6385,48 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
+ ac_lo=`expr '(' $ac_mid ')' + 1`
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_float=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (float), 77
+'') if test "$ac_cv_type_float" = yes; then
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (float)
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (float), 77
+$as_echo "$as_me: error: cannot compute sizeof (float)
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; } ;;
+ { (exit 77); exit 77; }; }; }
+ else
+ ac_cv_sizeof_float=0
+ fi ;;
esac
else
- if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5796,8 +6434,8 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-long longval () { return (long) (sizeof (float)); }
-unsigned long ulongval () { return (long) (sizeof (float)); }
+static long int longval () { return (long int) (sizeof (float)); }
+static unsigned long int ulongval () { return (long int) (sizeof (float)); }
#include <stdio.h>
#include <stdlib.h>
int
@@ -5806,109 +6444,128 @@
FILE *f = fopen ("conftest.val", "w");
if (! f)
- exit (1);
- if (((long) (sizeof (float))) < 0)
+ return 1;
+ if (((long int) (sizeof (float))) < 0)
{
- long i = longval ();
- if (i != ((long) (sizeof (float))))
- exit (1);
- fprintf (f, "%ld\n", i);
+ long int i = longval ();
+ if (i != ((long int) (sizeof (float))))
+ return 1;
+ fprintf (f, "%ld", i);
}
else
{
- unsigned long i = ulongval ();
- if (i != ((long) (sizeof (float))))
- exit (1);
- fprintf (f, "%lu\n", i);
+ unsigned long int i = ulongval ();
+ if (i != ((long int) (sizeof (float))))
+ return 1;
+ fprintf (f, "%lu", i);
}
- exit (ferror (f) || fclose (f) != 0);
+ /* Do not output a trailing newline, as this causes \r\n confusion
+ on some platforms. */
+ return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_float=`cat conftest.val`
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (float), 77
+if test "$ac_cv_type_float" = yes; then
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (float)
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (float), 77
+$as_echo "$as_me: error: cannot compute sizeof (float)
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 77); exit 77; }; }; }
+ else
+ ac_cv_sizeof_float=0
+ fi
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-fi
rm -f conftest.val
-else
- ac_cv_sizeof_float=0
fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_float" >&5
-echo "${ECHO_T}$ac_cv_sizeof_float" >&6
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_float" >&5
+$as_echo "$ac_cv_sizeof_float" >&6; }
+
+
+
cat >>confdefs.h <<_ACEOF
#define SIZEOF_FLOAT $ac_cv_sizeof_float
_ACEOF
-if test "x$ac_cv_sizeof_unsigned_long" = "x$ac_cv_sizeof_float"; then
- echo "$as_me:$LINENO: checking for htonl" >&5
-echo $ECHO_N "checking for htonl... $ECHO_C" >&6
- cat >conftest.$ac_ext <<_ACEOF
+{ $as_echo "$as_me:$LINENO: checking for htonl" >&5
+$as_echo_n "checking for htonl... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#ifdef HAVE_NETINET_IN_H
+#if defined(HAVE_ARPA_INET_H)
+#include <arpa/inet.h>
+#elif defined(HAVE_NETINET_IN_H)
#include <netinet/in.h>
#endif
int
main ()
{
-unsigned short i; htonl(i);
+unsigned long i; htonl(i);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
htonl=yes
cat >>confdefs.h <<\_ACEOF
@@ -5916,184 +6573,337 @@
_ACEOF
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-htonl=no
+ htonl=no
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
- echo "$as_me:$LINENO: result: $htonl" >&5
-echo "${ECHO_T}$htonl" >&6
-fi
+{ $as_echo "$as_me:$LINENO: result: $htonl" >&5
+$as_echo "$htonl" >&6; }
if test "x$htons" != xyes -o "x$htonl" != xyes; then
- echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
+
+ { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
if test "${ac_cv_c_bigendian+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
- # See if sys/param.h defines the BYTE_ORDER macro.
-cat >conftest.$ac_ext <<_ACEOF
+ ac_cv_c_bigendian=unknown
+ # See if we're dealing with a universal compiler.
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#ifndef __APPLE_CC__
+ not a universal capable compiler
+ #endif
+ typedef int dummy;
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+
+ # Check for potential -arch flags. It is not universal unless
+ # there are some -arch flags. Note that *ppc* also matches
+ # ppc64. This check is also rather less than ideal.
+ case "${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}" in #(
+ *-arch*ppc*|*-arch*i386*|*-arch*x86_64*) ac_cv_c_bigendian=universal;;
+ esac
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if sys/param.h defines the BYTE_ORDER macro.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <sys/types.h>
-#include <sys/param.h>
+ #include <sys/param.h>
int
main ()
{
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
-#endif
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+ && LITTLE_ENDIAN)
+ bogus endian macros
+ #endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
# It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
-#include <sys/param.h>
+ #include <sys/param.h>
int
main ()
{
#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
+ not big endian
+ #endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_c_bigendian=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_c_bigendian=no
+ ac_cv_c_bigendian=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-# It does not; compile a test program.
-if test "$cross_compiling" = yes; then
- # try to guess the endianness by grepping values into an object file
- ac_cv_c_bigendian=unknown
- cat >conftest.$ac_ext <<_ACEOF
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+#include <limits.h>
+
int
main ()
{
- _ascii (); _ebcdic ();
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+ bogus endian macros
+ #endif
+
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ # It does; now see whether it defined to _BIG_ENDIAN or not.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_c_bigendian=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_c_bigendian=no
fi
-if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
- if test "$ac_cv_c_bigendian" = unknown; then
- ac_cv_c_bigendian=no
- else
- # finding both strings is unlikely to happen, but who knows?
- ac_cv_c_bigendian=unknown
- fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # Compile a test program.
+ if test "$cross_compiling" = yes; then
+ # Try to guess by grepping values from an object file.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+short int ascii_mm[] =
+ { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+ short int ascii_ii[] =
+ { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+ int use_ascii (int i) {
+ return ascii_mm[i] + ascii_ii[i];
+ }
+ short int ebcdic_ii[] =
+ { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+ short int ebcdic_mm[] =
+ { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+ int use_ebcdic (int i) {
+ return ebcdic_mm[i] + ebcdic_ii[i];
+ }
+ extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+ ac_cv_c_bigendian=yes
+ fi
+ if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+ fi
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -6101,62 +6911,86 @@
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+$ac_includes_default
int
main ()
{
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- } u;
- u.l = 1;
- exit (u.c[sizeof (long) - 1] == 1);
+
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long int l;
+ char c[sizeof (long int)];
+ } u;
+ u.l = 1;
+ return u.c[sizeof (long int) - 1] == 1;
+
+ ;
+ return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_c_bigendian=no
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
ac_cv_c_bigendian=yes
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
+
+
+ fi
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-case $ac_cv_c_bigendian in
- yes)
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+ yes)
+ cat >>confdefs.h <<\_ACEOF
+#define WORDS_BIGENDIAN 1
+_ACEOF
+;; #(
+ no)
+ ;; #(
+ universal)
cat >>confdefs.h <<\_ACEOF
-#define WORDS_BIGENDIAN 1
+#define AC_APPLE_UNIVERSAL_BUILD 1
_ACEOF
- ;;
- no)
- ;;
- *)
- { { echo "$as_me:$LINENO: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-echo "$as_me: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+
+ ;; #(
+ *)
+ { { $as_echo "$as_me:$LINENO: error: unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+$as_echo "$as_me: error: unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
{ (exit 1); exit 1; }; } ;;
-esac
+ esac
fi
@@ -6168,6 +7002,7 @@
save_prefix=$prefix
test "x$prefix" = xNONE && prefix=$ac_default_prefix
eval datadir_val=$datadir
+eval datadir_val=$datadir_val
prefix=$save_prefix
@@ -6182,7 +7017,7 @@
###########################################################################
- ac_config_files="$ac_config_files Makefile h5topng.1"
+ac_config_files="$ac_config_files Makefile h5topng.1"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -6202,39 +7037,59 @@
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
+ ;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-} |
+ esac |
+ sort
+) |
sed '
+ /^ac_cv_env_/b end
t clear
- : clear
+ :clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- echo "not updating unwritable cache $cache_file"
+ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
@@ -6243,66 +7098,62 @@
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+ { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+ { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+ { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+
: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -6315,23 +7166,79 @@
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
fi
-DUALCASE=1; export DUALCASE # for MKS sh
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
@@ -6340,33 +7247,60 @@
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -6374,159 +7308,122 @@
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# CDPATH.
+$as_unset CDPATH
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -6535,7 +7432,28 @@
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -6544,77 +7462,60 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
exec 6>&1
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
+# values after options handling.
+ac_log="
+This file was extended by h5utils $as_me 1.12, which was
+generated by GNU Autoconf 2.63. Invocation command line was
-This file was extended by h5utils $as_me 1.10, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
_ACEOF
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
-cat >>$CONFIG_STATUS <<\_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
-h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet, --silent
+ do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
Configuration files:
$config_files
@@ -6626,83 +7527,84 @@
$config_commands
Report bugs to <bug-autoconf at gnu.org>."
+
_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-h5utils config.status 1.10
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+h5utils config.status 1.12
+configured by $0, generated by GNU Autoconf 2.63,
+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
- -*)
+ *)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
esac
case $ac_option in
# Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ { $as_echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+ -*) { $as_echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
- *) ac_config_targets="$ac_config_targets $1" ;;
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
esac
shift
@@ -6716,40 +7618,54 @@
fi
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
fi
_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
-cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
-# INIT-COMMANDS section.
+# INIT-COMMANDS
#
-
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF
+# Handling of arguments.
for ac_config_target in $ac_config_targets
do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "h5topng.1" ) CONFIG_FILES="$CONFIG_FILES h5topng.1" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "h5topng.1") CONFIG_FILES="$CONFIG_FILES h5topng.1" ;;
+
+ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
+
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
@@ -6761,827 +7677,793 @@
fi
# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
-
# Create a (secure) tmp directory for tmp files.
{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
} ||
{
- echo "$me: cannot create a temporary directory in ." >&2
+ $as_echo "$as_me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr='
+'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# CONFIG_FILES section.
-#
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s, at SHELL@,$SHELL,;t t
-s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s, at exec_prefix@,$exec_prefix,;t t
-s, at prefix@,$prefix,;t t
-s, at program_transform_name@,$program_transform_name,;t t
-s, at bindir@,$bindir,;t t
-s, at sbindir@,$sbindir,;t t
-s, at libexecdir@,$libexecdir,;t t
-s, at datadir@,$datadir,;t t
-s, at sysconfdir@,$sysconfdir,;t t
-s, at sharedstatedir@,$sharedstatedir,;t t
-s, at localstatedir@,$localstatedir,;t t
-s, at libdir@,$libdir,;t t
-s, at includedir@,$includedir,;t t
-s, at oldincludedir@,$oldincludedir,;t t
-s, at infodir@,$infodir,;t t
-s, at mandir@,$mandir,;t t
-s, at build_alias@,$build_alias,;t t
-s, at host_alias@,$host_alias,;t t
-s, at target_alias@,$target_alias,;t t
-s, at DEFS@,$DEFS,;t t
-s, at ECHO_C@,$ECHO_C,;t t
-s, at ECHO_N@,$ECHO_N,;t t
-s, at ECHO_T@,$ECHO_T,;t t
-s, at LIBS@,$LIBS,;t t
-s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s, at INSTALL_DATA@,$INSTALL_DATA,;t t
-s, at CYGPATH_W@,$CYGPATH_W,;t t
-s, at PACKAGE@,$PACKAGE,;t t
-s, at VERSION@,$VERSION,;t t
-s, at ACLOCAL@,$ACLOCAL,;t t
-s, at AUTOCONF@,$AUTOCONF,;t t
-s, at AUTOMAKE@,$AUTOMAKE,;t t
-s, at AUTOHEADER@,$AUTOHEADER,;t t
-s, at MAKEINFO@,$MAKEINFO,;t t
-s, at install_sh@,$install_sh,;t t
-s, at STRIP@,$STRIP,;t t
-s, at ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s, at INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s, at mkdir_p@,$mkdir_p,;t t
-s, at AWK@,$AWK,;t t
-s, at SET_MAKE@,$SET_MAKE,;t t
-s, at am__leading_dot@,$am__leading_dot,;t t
-s, at AMTAR@,$AMTAR,;t t
-s, at am__tar@,$am__tar,;t t
-s, at am__untar@,$am__untar,;t t
-s, at MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s, at MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s, at MAINT@,$MAINT,;t t
-s, at CC@,$CC,;t t
-s, at CFLAGS@,$CFLAGS,;t t
-s, at LDFLAGS@,$LDFLAGS,;t t
-s, at CPPFLAGS@,$CPPFLAGS,;t t
-s, at ac_ct_CC@,$ac_ct_CC,;t t
-s, at EXEEXT@,$EXEEXT,;t t
-s, at OBJEXT@,$OBJEXT,;t t
-s, at DEPDIR@,$DEPDIR,;t t
-s, at am__include@,$am__include,;t t
-s, at am__quote@,$am__quote,;t t
-s, at AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s, at AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s, at AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s, at CCDEPMODE@,$CCDEPMODE,;t t
-s, at am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s, at am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s, at CPP@,$CPP,;t t
-s, at EGREP@,$EGREP,;t t
-s, at H5TOPNG_MAN@,$H5TOPNG_MAN,;t t
-s, at PNG_LIBS@,$PNG_LIBS,;t t
-s, at H4TOH5@,$H4TOH5,;t t
-s, at H5TOH4@,$H5TOH4,;t t
-s, at H4_LIBS@,$H4_LIBS,;t t
-s, at MKOCTFILE@,$MKOCTFILE,;t t
-s, at OCTAVE@,$OCTAVE,;t t
-s, at H5READ@,$H5READ,;t t
-s, at OCT_INSTALL_DIR@,$OCT_INSTALL_DIR,;t t
-s, at V5D_FILES@,$V5D_FILES,;t t
-s, at V5D_INCLUDES@,$V5D_INCLUDES,;t t
-s, at datadir_val@,$datadir_val,;t t
-s, at MORE_H5UTILS@,$MORE_H5UTILS,;t t
-s, at MORE_H5UTILS_MANS@,$MORE_H5UTILS_MANS,;t t
-s, at LIBOBJS@,$LIBOBJS,;t t
-s, at LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+ { (exit 1); exit 1; }; }
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
+$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
+ { (exit 1); exit 1; }; }
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ ac_file_inputs="$ac_file_inputs '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
-
ac_builddir=.
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s, at configure_input@,$configure_input,;t t
-s, at srcdir@,$ac_srcdir,;t t
-s, at abs_srcdir@,$ac_abs_srcdir,;t t
-s, at top_srcdir@,$ac_top_srcdir,;t t
-s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s, at builddir@,$ac_builddir,;t t
-s, at abs_builddir@,$ac_abs_builddir,;t t
-s, at top_builddir@,$ac_top_builddir,;t t
-s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
-s, at INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; }
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ rm -f "$tmp/stdin"
case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
{ (exit 1); exit 1; }; }
- # Do quote $f, to prevent DOS paths from being IFS'd.
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
{ (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- # Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h. The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status. Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless. Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo ' :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
- # Write a limited-size here document to $tmp/defines.sed.
- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#define' lines.
- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/defines.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo ' fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
- # Write a limited-size here document to $tmp/undefs.sed.
- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#undef'
- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/undefs.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
- rm -f conftest.undefs
- mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- echo "/* Generated by configure. */" >$tmp/config.h
- else
- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
- cat $tmp/in >>$tmp/config.h
- rm -f $tmp/in
- if test x"$ac_file" != x-; then
- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- rm -f $ac_file
- mv $tmp/config.h $ac_file
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; }
fi
else
- cat $tmp/config.h
- rm -f $tmp/config.h
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
+$as_echo "$as_me: error: could not create -" >&2;}
+ { (exit 1); exit 1; }; }
fi
-# Compute $ac_file's index in $config_headers.
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
- $ac_file | $ac_file:* )
+ $_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
+ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
- ac_builddir=.
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p $dirpart/$fdir
- else
- as_dir=$dirpart/$fdir
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir=$dirpart/$fdir
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
-
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
-done
+}
;;
+
esac
-done
-_ACEOF
+done # for ac_tag
-cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
+test $ac_write_fail = 0 ||
+ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
@@ -7602,4 +8484,8 @@
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
Modified: packages/h5utils/branches/upstream/current/configure.ac
===================================================================
--- packages/h5utils/branches/upstream/current/configure.ac 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/configure.ac 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,5 +1,5 @@
# Process this file with autoconf to produce a configure script.
-AC_INIT(h5utils, 1.10, stevenj at alum.mit.edu)
+AC_INIT(h5utils, 1.12, stevenj at alum.mit.edu)
AM_INIT_AUTOMAKE(1.6)
AC_CONFIG_SRCDIR([h5topng.c])
AM_CONFIG_HEADER(config.h)
@@ -7,6 +7,7 @@
# Checks for programs.
AC_PROG_CC
+AM_PROG_CC_C_O
# Checks for header files.
AC_HEADER_STDC
@@ -53,7 +54,7 @@
fi
if test $H5TOPNG = yes; then
- MORE_H5UTILS="h5topng $MORE_H5UTILS"
+ MORE_H5UTILS="h5topng\$(EXEEXT) $MORE_H5UTILS"
H5TOPNG_MAN=h5topng.1
fi
@@ -65,7 +66,7 @@
AC_CHECK_LIB(matheval, evaluator_get_variables, H5MATH=yes, H5MATH=no)
if test $H5MATH = yes; then
- MORE_H5UTILS="h5math $MORE_H5UTILS"
+ MORE_H5UTILS="h5math\$(EXEEXT) $MORE_H5UTILS"
MORE_H5UTILS_MANS="h5math.1 $MORE_H5UTILS_MANS"
else
AC_MSG_WARN([can't find libmatheval: won't be able to compile h5math])
@@ -99,11 +100,11 @@
if test $HDF4 = yes; then
if test "x$H4TOH5" != xh4toh5; then
- MORE_H5UTILS="h5fromh4 $MORE_H5UTILS"
+ MORE_H5UTILS="h5fromh4\$(EXEEXT) $MORE_H5UTILS"
MORE_H5UTILS_MANS="h5fromh4.1 $MORE_H5UTILS_MANS"
fi
if test "x$H5TOH4" != xh5toh4; then
- MORE_H5UTILS="h4fromh5 $MORE_H5UTILS"
+ MORE_H5UTILS="h4fromh5\$(EXEEXT) $MORE_H5UTILS"
# MORE_H5UTILS_MANS="h4fromh5.1 $MORE_H5UTILS_MANS"
fi
fi
@@ -132,7 +133,10 @@
# try to find installation directory
AC_CHECK_PROGS(OCTAVE, octave, echo)
AC_MSG_CHECKING(where octave plugins go)
- OCT_INSTALL_DIR=`echo "DEFAULT_LOADPATH" | $OCTAVE -q | tr ':' '\n' | grep "site/oct" | head -1`
+ OCT_INSTALL_DIR=`echo "path" | $OCTAVE -q 2> /dev/null | grep "/oct/" | head -1`
+ if test -z "$OCT_INSTALL_DIR"; then
+ OCT_INSTALL_DIR=`echo "DEFAULT_LOADPATH" | $OCTAVE -q 2> /dev/null | tr ':' '\n' | grep "site/oct" | head -1`
+ fi
if test -n "$OCT_INSTALL_DIR"; then
AC_MSG_RESULT($OCT_INSTALL_DIR)
H5READ=h5read.oct
@@ -174,7 +178,7 @@
H5TOV5D=yes
fi
if test $H5TOV5D = yes; then
- MORE_H5UTILS="h5tov5d $MORE_H5UTILS"
+ MORE_H5UTILS="h5tov5d\$(EXEEXT) $MORE_H5UTILS"
MORE_H5UTILS_MANS="h5tov5d.1 $MORE_H5UTILS_MANS"
fi
AC_SUBST(V5D_FILES)
@@ -182,26 +186,28 @@
###########################################################################
-AC_CHECK_HEADERS([netinet/in.h])
+AC_CHECK_HEADERS([arpa/inet.h netinet/in.h stdint.h inttypes.h])
+AC_CHECK_TYPES([uint16_t, uint32_t])
AC_MSG_CHECKING([for htons])
-AC_TRY_LINK([#ifdef HAVE_NETINET_IN_H
+AC_TRY_LINK([#if defined(HAVE_ARPA_INET_H)
+#include <arpa/inet.h>
+#elif defined(HAVE_NETINET_IN_H)
#include <netinet/in.h>
#endif], [unsigned short i; htons(i);], [htons=yes
AC_DEFINE([HAVE_HTONS],1,[Define if you have htons.])], htons=no)
AC_MSG_RESULT($htons)
-AC_CHECK_SIZEOF(unsigned long)
AC_CHECK_SIZEOF(float)
-if test "x$ac_cv_sizeof_unsigned_long" = "x$ac_cv_sizeof_float"; then
- AC_MSG_CHECKING([for htonl])
- AC_TRY_LINK([#ifdef HAVE_NETINET_IN_H
+AC_MSG_CHECKING([for htonl])
+AC_TRY_LINK([#if defined(HAVE_ARPA_INET_H)
+#include <arpa/inet.h>
+#elif defined(HAVE_NETINET_IN_H)
#include <netinet/in.h>
-#endif], [unsigned short i; htonl(i);], [htonl=yes
- AC_DEFINE([HAVE_HTONL],1,[Define if you have htonl.])], htonl=no)
- AC_MSG_RESULT($htonl)
-fi
+#endif], [unsigned long i; htonl(i);], [htonl=yes
+ AC_DEFINE([HAVE_HTONL],1,[Define if you have htonl.])], htonl=no)
+AC_MSG_RESULT($htonl)
if test "x$htons" != xyes -o "x$htonl" != xyes; then
AC_C_BIGENDIAN
@@ -215,6 +221,7 @@
save_prefix=$prefix
test "x$prefix" = xNONE && prefix=$ac_default_prefix
eval datadir_val=$datadir
+eval datadir_val=$datadir_val
prefix=$save_prefix
AC_DEFINE_UNQUOTED(DATADIR, "$datadir_val", [datadir installation prefix])
Modified: packages/h5utils/branches/upstream/current/copyright.h
===================================================================
--- packages/h5utils/branches/upstream/current/copyright.h 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/copyright.h 2009-06-24 12:26:10 UTC (rev 2312)
@@ -4,7 +4,7 @@
/* License and copyright string for inclusion in program output: */
#define COPYRIGHT \
-"Copyright (c) 2005 Massachusetts Institute of Technology\n"\
+"Copyright (c) 1999-2009 Massachusetts Institute of Technology\n"\
"\n"\
"Permission is hereby granted, free of charge, to any person obtaining\n"\
"a copy of this software and associated documentation files (the\n"\
Modified: packages/h5utils/branches/upstream/current/depcomp
===================================================================
--- packages/h5utils/branches/upstream/current/depcomp 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/depcomp 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,9 +1,10 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2005-02-09.22
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,9 +17,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -86,12 +85,34 @@
depmode=dashmstdout
fi
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u="sed s,\\\\\\\\,/,g"
+ depmode=msvisualcpp
+fi
+
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
stat=$?
if test $stat -eq 0; then :
else
@@ -178,14 +199,14 @@
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
-' ' ' >> $depfile
- echo >> $depfile
+' ' ' >> "$depfile"
+ echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
+ >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -201,34 +222,39 @@
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile"
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
if test -f "$tmpdepfile"; then
- outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -276,6 +302,51 @@
rm -f "$tmpdepfile"
;;
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -288,13 +359,13 @@
if test "$libtool" = yes; then
# With Tru64 cc, shared objects can also be used to make a
- # static library. This mecanism is used in libtool 1.4 series to
+ # static library. This mechanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in in $dir.libs/$base.o.d and
+ # compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
@@ -345,7 +416,7 @@
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
@@ -396,32 +467,39 @@
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no
- for arg in "$@"; do
+ cleared=no eat=no
+ for arg
+ do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
@@ -441,7 +519,7 @@
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
@@ -467,7 +545,8 @@
done
"$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
@@ -478,13 +557,27 @@
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
+ # always write the preprocessed file to stdout.
"$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
IFS=" "
for arg
do
case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
@@ -497,16 +590,23 @@
;;
esac
done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
none)
exec "$@"
;;
@@ -525,5 +625,6 @@
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
Modified: packages/h5utils/branches/upstream/current/h4fromh5.c
===================================================================
--- packages/h5utils/branches/upstream/current/h4fromh5.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h4fromh5.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5fromh4.1
===================================================================
--- packages/h5utils/branches/upstream/current/h5fromh4.1 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5fromh4.1 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2005 Massachusetts Institute of Technology
+.\" Copyright (c) 1999-2009 Massachusetts Institute of Technology
.\"
.\" Permission is hereby granted, free of charge, to any person obtaining
.\" a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5fromh4.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5fromh4.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5fromh4.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5fromitxt.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5fromitxt.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5fromitxt.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5fromtxt.1
===================================================================
--- packages/h5utils/branches/upstream/current/h5fromtxt.1 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5fromtxt.1 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2005 Massachusetts Institute of Technology
+.\" Copyright (c) 1999-2009 Massachusetts Institute of Technology
.\"
.\" Permission is hereby granted, free of charge, to any person obtaining
.\" a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5fromtxt.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5fromtxt.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5fromtxt.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5math.1
===================================================================
--- packages/h5utils/branches/upstream/current/h5math.1 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5math.1 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2005 Massachusetts Institute of Technology
+.\" Copyright (c) 1999-2009 Massachusetts Institute of Technology
.\"
.\" Permission is hereby granted, free of charge, to any person obtaining
.\" a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5math.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5math.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5math.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5topng.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5topng.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5topng.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5totxt.1
===================================================================
--- packages/h5utils/branches/upstream/current/h5totxt.1 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5totxt.1 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2005 Massachusetts Institute of Technology
+.\" Copyright (c) 1999-2009 Massachusetts Institute of Technology
.\"
.\" Permission is hereby granted, free of charge, to any person obtaining
.\" a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5totxt.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5totxt.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5totxt.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5tov5d.1
===================================================================
--- packages/h5utils/branches/upstream/current/h5tov5d.1 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5tov5d.1 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2005 Massachusetts Institute of Technology
+.\" Copyright (c) 1999-2009 Massachusetts Institute of Technology
.\"
.\" Permission is hereby granted, free of charge, to any person obtaining
.\" a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5tov5d.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5tov5d.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5tov5d.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* [ IMPORTANT: Note that the following is DIFFERENT from the license
* for the rest of the h5utils package. ]
@@ -306,7 +306,7 @@
return EXIT_SUCCESS;
case 'V':
printf("h5tov5d " PACKAGE_VERSION " by Steven G. Johnson\n"
- "Copyright (c) 2005 Massachusetts Institute of Technology\n"
+ "Copyright (c) 1999-2009 Massachusetts Institute of Technology\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
Modified: packages/h5utils/branches/upstream/current/h5tovtk.1
===================================================================
--- packages/h5utils/branches/upstream/current/h5tovtk.1 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5tovtk.1 2009-06-24 12:26:10 UTC (rev 2312)
@@ -81,7 +81,6 @@
you specify coordinates in one (or more) slice dimension(s), via the
.B -xyzt
options.
-.SH OPTIONS
.TP
\fB\-1\fR, \fB\-2\fR, \fB\-4\fR
Use 1 , 2, or 4 bytes to store each data point in the
Modified: packages/h5utils/branches/upstream/current/h5tovtk.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5tovtk.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5tovtk.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@@ -28,15 +28,36 @@
#include <unistd.h>
-#ifdef HAVE_NETINET_IN_H
+#include "config.h"
+
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+
+#if defined(HAVE_ARPA_INET_H)
+# include <arpa/inet.h>
+#elif defined(HAVE_NETINET_IN_H)
# include <netinet/in.h>
#endif
-#include "config.h"
#include "arrayh5.h"
#include "copyright.h"
#include "h5utils.h"
+#ifdef HAVE_UINT16_T
+typedef uint16_t my_uint16_t;
+#else
+typedef unsigned short my_uint16_t;
+#endif
+#ifdef HAVE_UINT32_T
+typedef uint32_t my_uint32_t;
+#else
+typedef unsigned long my_uint32_t;
+#endif
+
#define CHECK(cond, msg) { if (!(cond)) { fprintf(stderr, "h5tovtk error: %s\n", msg); exit(EXIT_FAILURE); } }
void usage(FILE *f)
@@ -94,8 +115,8 @@
"ORIGIN %g %g %g\n"
"SPACING %g %g %g\n",
is_binary ? "BINARY" : "ASCII",
- nz, ny, nx,
- oz, oy, ox, sz, sy, sx);
+ nx, ny, nz,
+ ox, oy, oz, sx, sy, sz);
}
static void write_vtk_value(FILE *f, double v, int store_bytes, int fix_bytes,
@@ -116,7 +137,7 @@
}
case 2:
{
- unsigned short i;
+ my_uint16_t i;
i = floor((v - min) * 65535.0 / (max - min) + 0.5);
if (fix_bytes) {
#if defined(HAVE_HTONS)
@@ -134,8 +155,8 @@
{
float fv = v;
if (fix_bytes) {
-#if defined(HAVE_HTONL) && (SIZEOF_FLOAT == SIZEOF_UNSIGNED_LONG)
- unsigned long *i = (unsigned long *) &fv;
+#if defined(HAVE_HTONL) && (SIZEOF_FLOAT == 4)
+ my_uint32_t *i = (my_uint32_t *) &fv;
*i = htonl(*i);
#elif ! defined(WORDS_BIGENDIAN)
unsigned char swap, *bytes;
@@ -247,8 +268,10 @@
CHECK(store_bytes != 4 || sizeof(float) == 4,
"'float' is wrong size for -4");
- CHECK(store_bytes != 2 || sizeof(unsigned short) == 4,
- "'short' is wrong size for -2");
+ CHECK(store_bytes != 4 || sizeof(my_uint32_t) == 4,
+ "missing 4-byte integer type for -4");
+ CHECK(store_bytes != 2 || sizeof(my_uint16_t) == 2,
+ "missing 2-byte integer type for -2");
a = (arrayh5*) malloc(sizeof(arrayh5) * (na = argc - optind));
CHECK(a, "out of memory");
@@ -302,7 +325,7 @@
if (!combine) {
FILE *f;
- int i, N = nx * ny * nz;
+ int ix, iy, iz, N = nx * ny * nz;
if (verbose)
printf("writing \"%s\" from %dx%dx%d input data.\n",
@@ -323,9 +346,13 @@
"LOOKUP_TABLE default\n",
N, found_dname, vtk_datatype[store_bytes]);
- for (i = 0; i < N; ++i)
+ for (iz = 0; iz < nz; ++iz)
+ for (iy = 0; iy < ny; ++iy)
+ for (ix = 0; ix < nx; ++ix) {
+ int i = (ix*ny + iy)*nz + iz;
write_vtk_value(f, a[ia].data[i], store_bytes,
fix_byte_order, min, max, invert);
+ }
if (f != stdout)
fclose(f);
@@ -338,7 +365,7 @@
if (combine) {
FILE *f;
- int i, N = nx * ny * nz;
+ int ix, iy, iz, N = nx * ny * nz;
if (verbose)
printf("writing \"%s\" from %dx%dx%d input data.\n",
@@ -368,8 +395,10 @@
na, N, vtk_datatype[store_bytes]);
}
- for (i = 0; i < N; ++i) {
- int ia;
+ for (iz = 0; iz < nz; ++iz)
+ for (iy = 0; iy < ny; ++iy)
+ for (ix = 0; ix < nx; ++ix) {
+ int ia, i = (ix*ny + iy)*nz + iz;
for (ia = 0; ia < na; ++ia)
write_vtk_value(f, a[ia].data[i], store_bytes,
fix_byte_order, min, max, invert);
Modified: packages/h5utils/branches/upstream/current/h5utils.c
===================================================================
--- packages/h5utils/branches/upstream/current/h5utils.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5utils.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/h5utils.h
===================================================================
--- packages/h5utils/branches/upstream/current/h5utils.h 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/h5utils.h 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 1999, 2000, 2001, 2002 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
Modified: packages/h5utils/branches/upstream/current/install-sh
===================================================================
--- packages/h5utils/branches/upstream/current/install-sh 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/install-sh 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2005-02-02.21
+scriptversion=2009-04-28.21; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,38 +39,68 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
+
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
-chmodcmd="$chmodprog 0755"
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
chowncmd=
-chgrpcmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+
src=
dst=
dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
no_target_directory=
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,81 +110,86 @@
In the 4th, create DIRECTORIES.
Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
+ --help display this help and exit.
+ --version display version info and exit.
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
"
-while test -n "$1"; do
+while test $# -ne 0; do
case $1 in
- -c) shift
- continue;;
+ -c) ;;
- -d) dir_arg=true
- shift
- continue;;
+ -C) copy_on_change=true;;
+ -d) dir_arg=true;;
+
-g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
+ shift;;
--help) echo "$usage"; exit $?;;
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
+ shift;;
- -s) stripcmd=$stripprog
- shift
- continue;;
+ -s) stripcmd=$stripprog;;
- -t) dstarg=$2
- shift
- shift
- continue;;
+ -t) dst_arg=$2
+ shift;;
- -T) no_target_directory=true
- shift
- continue;;
+ -T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
- *) # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- test -n "$dir_arg$dstarg" && break
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
+ --) shift
break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
esac
+ shift
done
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
+
+if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
@@ -164,24 +199,47 @@
exit 0
fi
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
for src
do
# Protect names starting with `-'.
case $src in
- -*) src=./$src ;;
+ -*) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
- src=
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
- if test -d "$dst"; then
- mkdircmd=:
- chmodcmd=
- else
- mkdircmd=$mkdirprog
- fi
- else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
@@ -190,71 +248,199 @@
exit 1
fi
- if test -z "$dstarg"; then
+ if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
- dst=$dstarg
+ dst=$dst_arg
# Protect names starting with `-'.
case $dst in
- -*) dst=./$dst ;;
+ -*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
+ echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
- dst=$dst/`basename "$src"`
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
fi
fi
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+ obsolete_mkdir_used=false
- # Make sure that the destination directory exists.
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
- shift
- IFS=$oIFS
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- pathcomp=
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test -d "$pathcomp" || exit
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
- pathcomp=$pathcomp/
- done
+ fi
fi
if test -n "$dir_arg"; then
- $doit $mkdircmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
- dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
@@ -262,10 +448,9 @@
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -273,51 +458,63 @@
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
- || {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
- }
- }
- fi || { (exit 1); exit 1; }
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
done
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit 0
-}
-
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
Modified: packages/h5utils/branches/upstream/current/missing
===================================================================
--- packages/h5utils/branches/upstream/current/missing 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/missing 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,10 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2005-02-08.22
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -33,6 +31,8 @@
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -44,7 +44,7 @@
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -77,6 +77,7 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -86,6 +87,9 @@
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
Send bug reports to <bug-automake at gnu.org>."
exit $?
;;
@@ -103,15 +107,22 @@
esac
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
- lex|yacc)
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
- tar)
+ tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
@@ -135,7 +146,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case "$1" in
+case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -145,7 +156,7 @@
touch aclocal.m4
;;
- autoconf)
+ autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -154,7 +165,7 @@
touch configure
;;
- autoheader)
+ autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -164,7 +175,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -184,7 +195,7 @@
while read f; do touch "$f"; done
;;
- autom4te)
+ autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -192,8 +203,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
@@ -207,80 +218,78 @@
fi
;;
- bison|yacc)
+ bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
- lex|flex)
+ lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
- help2man)
+ help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit 1
+ exit $?
fi
;;
- makeinfo)
+ makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -289,18 +298,27 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
touch $file
;;
- tar)
+ tar*)
shift
# We have already tried tar in the generic part.
@@ -314,13 +332,13 @@
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
@@ -353,5 +371,6 @@
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
Modified: packages/h5utils/branches/upstream/current/writepng.c
===================================================================
--- packages/h5utils/branches/upstream/current/writepng.c 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/writepng.c 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 2005 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@@ -383,7 +383,7 @@
return;
}
}
- for (row = 0; row < height; ++row) {
+ for (row = height-1; row >= 0; --row) {
REAL x = row * scalex;
int n = PIN(0,(int) (x + 0.5), data_height-1);
double delta = x - n;
@@ -401,7 +401,7 @@
data_height,
mask ? mask + (n%mny) : NULL,
mask ? mask + (n3%mny) : NULL,
- mask_thresh, mask_prev, row == 0,
+ mask_thresh, mask_prev, row == height-1,
mask_byte, mnx, mny,
overlay != 0,
overlay + (n%ony), overlay + (n2%ony),
@@ -415,7 +415,7 @@
1,
mask ? mask + (n%mnx) * mny : NULL,
mask ? mask + (n3%mnx) * mny : NULL,
- mask_thresh, mask_prev, row == 0,
+ mask_thresh, mask_prev, row == height-1,
mask_byte, mny, 1,
overlay != 0,
overlay + (n%onx) * ony,
Modified: packages/h5utils/branches/upstream/current/writepng.h
===================================================================
--- packages/h5utils/branches/upstream/current/writepng.h 2009-06-24 12:19:57 UTC (rev 2311)
+++ packages/h5utils/branches/upstream/current/writepng.h 2009-06-24 12:26:10 UTC (rev 2312)
@@ -1,4 +1,4 @@
-/* Copyright (c) 1999, 2000, 2001, 2002 Massachusetts Institute of Technology
+/* Copyright (c) 1999-2009 Massachusetts Institute of Technology
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
More information about the Pkg-grass-devel
mailing list