Bug#538030: grub-ieee1275 fails to install bootblock

Alexander Vlasov Alexander.Vlasov at Sun.COM
Wed Jul 22 15:26:05 UTC 2009


Package: grub-ieee1275
Version: 1.96+20090709-1
Severity: normal

I got a problem trying to setup grub as a bootloader on Ultra45 machine with 
LSI SAS controller.

Namely, after installing a package I tried to run grub-install, but it failed 
with following diagnostic message:

---
grub-mkdevicemap: error: Cannot open SAS PHY ID 
'/sys/devices/root/f0063e50/pci0000:02/0000:02:00.0/0000:03:09.0/0000:0a:00.0/0000:0b:01.0/host0/port-0:0/end_device-0:0/sas_device:end_device-0:0/phy_identifier'
---

I tried to create device map manually, and this message disappeared, 
grub-install finished successfully; however boot loader is still SILO.

Regardless of device.map file, the error message above can be reproduced if 
grub-setup being invoked with `--recheck' option.

The machine in question is Ultra45, HW info follows:
# lspci | grep SCSI
0000:0b:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X 
Fusion-MPT SAS (rev 02)

appropriate dmesg part:
[   57.705793] scsi0 : ioc0: LSISAS1064 A3, FwRev=01080300h, Ports=1, MaxQ=511, 
IRQ=11
[   57.728772] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HDS7225S A94A 
PQ: 0 ANSI: 5
[   57.757453] Driver 'sd' needs updating - please use bus_type methods
[   57.761410] sd 0:0:0:0: [sda] 488390625 512-byte hardware sectors: (250 
GB/232 GiB)
[   57.768028] sd 0:0:0:0: [sda] Write Protect is off
[   57.771009] sd 0:0:0:0: [sda] Mode Sense: 67 00 00 08
[   57.772982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   57.782675]  sda: sda1 sda2 sda3
[   57.805259] sd 0:0:0:0: [sda] Attached SCSI disk


Tho problems (error message and grub boot sector not actually installed) joined 
in one report since I believe they're somehow related.


-- System Information:
Debian Release: squeeze/sid
   APT prefers unstable
   APT policy: (500, 'unstable')
Architecture: sparc

Kernel: Linux 2.6.30-1-sparc64-smp (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages grub-ieee1275 depends on:
ii  grub-common              1.96+20090709-1 GRand Unified Bootloader, version
ii  libc6                    2.9-20          GNU C Library: Shared libraries
ii  ucf                      3.0018          Update Configuration File: preserv

grub-ieee1275 recommends no packages.

Versions of packages grub-ieee1275 suggests:
pn  genisoimage                   <none>     (no description available)
pn  os-prober                     <none>     (no description available)

-- no debconf information





More information about the Pkg-grub-devel mailing list