[hamradio-commits] [dump1090-mutability] 172/172: debian/dump1090-mutability.templates: translation fields marked
Matteo F. Vescovi
mfv at moszumanska.debian.org
Sun Jan 28 13:45:57 UTC 2018
This is an automated email from the git hooks/post-receive script.
mfv pushed a commit to branch master
in repository dump1090-mutability.
commit 2de741c263f265382ca263dd17517928f2b53f1d
Author: Matteo F. Vescovi <mfv at debian.org>
Date: Sat Jan 27 23:28:02 2018 +0100
debian/dump1090-mutability.templates: translation fields marked
Gbp-Dch: Ignore
---
debian/dump1090-mutability.templates | 82 ++++++++++++++++++------------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/debian/dump1090-mutability.templates b/debian/dump1090-mutability.templates
index fc9929e..c5ad46a 100644
--- a/debian/dump1090-mutability.templates
+++ b/debian/dump1090-mutability.templates
@@ -1,5 +1,5 @@
Template: dump1090-mutability/auto-start
-Description: Start dump1090 automatically?
+_Description: Start dump1090 automatically?
dump1090 can be started automatically via an init-script.
Otherwise, the init-script does nothing; you must run dump1090 by hand.
.
@@ -10,21 +10,21 @@ Type: boolean
Default: true
Template: dump1090-mutability/run-as-user
-Description: User to run dump1090 as:
+_Description: User to run dump1090 as:
When started automatically, dump1090 runs as an unprivileged system user.
This user will be created if it does not yet exist.
Type: string
Default: dump1090
Template: dump1090-mutability/log-file
-Description: Path to log to:
+_Description: Path to log to:
When started automatically, dump1090 will log its output somewhere. This
log will contain any startup errors, and periodic statistics reports.
Type: string
Default: /var/log/dump1090-mutability.log
Template: dump1090-mutability/rtlsdr-device
-Description: RTL-SDR dongle to use:
+_Description: RTL-SDR dongle to use:
If you have only one dongle connected, you can leave this blank.
.
Otherwise, you can provide the serial number (more reliable) or device
@@ -36,7 +36,7 @@ Type: string
Default:
Template: dump1090-mutability/rtlsdr-gain
-Description: RTL-SDR gain, in dB:
+_Description: RTL-SDR gain, in dB:
The tuner gain used by dump1090 can be provided as a value in dB, or
"max" to use the maximum gain available, or "agc" to use the tuner's AGC to
control the gain. If unsure, choose "max".
@@ -44,7 +44,7 @@ Type: string
Default: max
Template: dump1090-mutability/rtlsdr-ppm
-Description: RTL-SDR frequency correction, in PPM:
+_Description: RTL-SDR frequency correction, in PPM:
The oscillator in each RTL-SDL dongle is not perfectly accurate. You can
choose a correction factor, in parts-per-million, to correct for this. The
correction factor varies from dongle to dongle, and also varies with operating
@@ -54,7 +54,7 @@ Type: string
Default: 0
Template: dump1090-mutability/decode-fixcrc
-Description: Fix detected CRC errors?
+_Description: Fix detected CRC errors?
dump1090 can fix unambiguous single-bit CRC errors detected in received
messages. This allows weaker messages to be decoded. It can slightly increase
the rate of undetected errors, but this is not usually significant.
@@ -62,7 +62,7 @@ Type: boolean
Default: true
Template: dump1090-mutability/decode-lat
-Description: Latitude of receiver, in decimal degrees:
+_Description: Latitude of receiver, in decimal degrees:
If the location of the receiver is provided, dump1090 can do
local position decoding in cases where insufficient position messages are
received for unambiguous global position decoding.
@@ -70,7 +70,7 @@ Type: string
Default:
Template: dump1090-mutability/decode-lon
-Description: Longitude of receiver, in decimal degrees:
+_Description: Longitude of receiver, in decimal degrees:
If the location of the receiver is provided, dump1090 can do
local position decoding in cases where insufficient position messages are
received for unambiguous global position decoding.
@@ -78,7 +78,7 @@ Type: string
Default:
Template: dump1090-mutability/decode-max-range
-Description: Absolute maximum range of receiver, in nautical miles:
+_Description: Absolute maximum range of receiver, in nautical miles:
If the maximum range of the receiver is provided, dump1090 can filter
out impossible position reports that are due to aircraft that transmit
bad data.
@@ -95,7 +95,7 @@ Type: string
Default: 300
Template: dump1090-mutability/net-ri-port
-Description: Portsfor AVR-format input connections (0 disables):
+_Description: Portsfor AVR-format input connections (0 disables):
dump1090 can accept connections to receive data from other sources in
several formats. This setting controls the port dump1090 will listen
on for AVR ("raw") format input connections.
@@ -103,7 +103,7 @@ Type: string
Default: 30001
Template: dump1090-mutability/net-ro-port
-Description: Ports for AVR-format output connections (0 disables):
+_Description: Ports for AVR-format output connections (0 disables):
dump1090 can forward ADS-B messages to other software in several formats.
This setting controls the port dump1090 will listen on for AVR ("raw")
format output connections.
@@ -111,7 +111,7 @@ Type: string
Default: 30002
Template: dump1090-mutability/net-bi-port
-Description: Ports for Beast-format input connections (0 disables):
+_Description: Ports for Beast-format input connections (0 disables):
dump1090 can accept connections to receive data from other sources in
several formats. This setting controls the port dump1090 will listen
on for Beast ("binary") format input connections.
@@ -119,7 +119,7 @@ Type: string
Default: 30004,30104
Template: dump1090-mutability/net-bo-port
-Description: Ports for Beast-format output connections (0 disables):
+_Description: Ports for Beast-format output connections (0 disables):
dump1090 can forward ADS-B messages to other software in several formats.
This setting controls the port dump1090 will listen on for Beast ("binary")
format output connections.
@@ -127,7 +127,7 @@ Type: string
Default: 30005
Template: dump1090-mutability/net-sbs-port
-Description: Ports for SBS-format output connections (0 disables):
+_Description: Ports for SBS-format output connections (0 disables):
dump1090 can forward ADS-B messages to other software in several formats.
This setting controls the port dump1090 will listen on for SBS BaseStation
format output connections.
@@ -135,7 +135,7 @@ Type: string
Default: 30003
Template: dump1090-mutability/net-heartbeat
-Description: Seconds between heartbeat messages (0 disables):
+_Description: Seconds between heartbeat messages (0 disables):
If there is no other data sent on a network connection, dump1090 can
periodically send an empty heartbeat message to ensure that the
connection stays established. This setting controls the interval
@@ -144,7 +144,7 @@ Type: string
Default: 60
Template: dump1090-mutability/net-out-size
-Description: Minimum output message size:
+_Description: Minimum output message size:
To avoid sending many small network messages, output connections will
accumulate data waiting to be sent until either a minimum size is reached
or a maximum delay is reached. This setting controls the minimum size,
@@ -153,7 +153,7 @@ Type: string
Default: 500
Template: dump1090-mutability/net-out-interval
-Description: Maximum output buffering time:
+__Description: Maximum output buffering time:
To avoid sending many small network messages, output connections will
buffer data waiting to be sent until either a minimum size is reached
or a maximum delay is reached. This setting controls the maximum delay,
@@ -162,14 +162,14 @@ Type: string
Default: 1
Template: dump1090-mutability/net-buffer
-Description: SO_SNDBUF size:
+_Description: SO_SNDBUF size:
Here you can specify the TCP send buffer size to use on network connections.
Type: select
Choices: 65536, 131072, 262144
Default: 262144
Template: dump1090-mutability/net-bind-address
-Description: Interface address to bind to (blank for all interfaces):
+_Description: Interface address to bind to (blank for all interfaces):
If you want to limit incoming connections to a particular interface,
specify the interface address here. A blank value will bind to the wildcard
address, allowing connections on all interfaces.
@@ -180,14 +180,14 @@ Type: string
Default: 127.0.0.1
Template: dump1090-mutability/stats-interval
-Description: Interval between logging stats, in seconds:
+_Description: Interval between logging stats, in seconds:
dump1090 will periodically log message reception stats to its logfile.
This setting controls how often that is done.
Type: string
Default: 3600
Template: dump1090-mutability/use-lighttpd
-Description: Enable the lighttpd integration?
+_Description: Enable the lighttpd integration?
dump1090 can serve a virtual radar map via a separate webserver.
This package includes a configuration for lighttpd that does this.
To use that configuration, enable this option.
@@ -195,7 +195,7 @@ Type: boolean
Default: true
Template: dump1090-mutability/json-dir
-Description: Directory to write JSON aircraft state to:
+_Description: Directory to write JSON aircraft state to:
As this can be written frequently, you should select a location
that is not on a sdcard. The default path under /run is on tmpfs
and will not write to the sdcard.
@@ -206,7 +206,7 @@ Type: string
Default: /run/dump1090-mutability
Template: dump1090-mutability/json-interval
-Description: Interval between writing JSON aircraft state, in seconds:
+_Description: Interval between writing JSON aircraft state, in seconds:
dump1090 periodically write a list of aircraft, in JSON format, for use
by the virtual radar view when using an external webserver. This setting
controls the directory to write to.
@@ -217,7 +217,7 @@ Type: string
Default: 1
Template: dump1090-mutability/json-location-accuracy
-Description: Receiver location accuracy to show in the web interface:
+_Description: Receiver location accuracy to show in the web interface:
dump1090 can provide the configured receiver location to the web map,
so that the map can show distances from the receiver.
.
@@ -238,70 +238,70 @@ Choices: approximate, exact, none
Default: approximate
Template: dump1090-mutability/log-decoded-messages
-Description: Log all decoded messages?
+_Description: Log all decoded messages?
dump1090 can log all decoded messages as text to the logfile.
This can result in a very large logfile! Usually you don't need this.
Type: boolean
Default: false
Template: dump1090-mutability/extra-args
-Description: Extra arguments to pass to dump1090:
+_Description: Extra arguments to pass to dump1090:
Here you can add any extra arguments you want to pass to dump1090.
Type: string
Default:
Template: dump1090-mutability/invalid-is_unsigned_int
-Description: Value must be an unsigned integer.
+_Description: Value must be an unsigned integer.
Type: error
Template: dump1090-mutability/invalid-is_unsigned_int_or_empty
-Description: Value must be an unsigned integer, or blank.
+_Description: Value must be an unsigned integer, or blank.
Type: error
Template: dump1090-mutability/invalid-is_positive_int
-Description: Value must be a positive integer.
+_Description: Value must be a positive integer.
Type: error
Template: dump1090-mutability/invalid-is_signed_int
-Description: Value must be an integer.
+_Description: Value must be an integer.
Type: error
Template: dump1090-mutability/invalid-is_signed_int_or_empty
-Description: Value must be an integer, or blank.
+_Description: Value must be an integer, or blank.
Type: error
Template: dump1090-mutability/invalid-is_not_empty
-Description: Value cannot be empty.
+_Description: Value cannot be empty.
Type: error
Template: dump1090-mutability/invalid-is_port_number
-Description: Value must be a valid port number (1024-65535), or zero to disable.
+_Description: Value must be a valid port number (1024-65535), or zero to disable.
Type: error
Template: dump1090-mutability/invalid-is_port_list
-Description: Value must be a comma-separated list of valid port numbers (1024-65535), or zero to disable.
+_Description: Value must be a comma-separated list of valid port numbers (1024-65535), or zero to disable.
Type: error
Template: dump1090-mutability/invalid-is_ipaddrish_or_empty
-Description: Value must be an IP address or empty.
+_Description: Value must be an IP address or empty.
Type: error
Template: dump1090-mutability/invalid-is_number
-Description: Value must be a decimal number
+_Description: Value must be a decimal number
Type: error
Template: dump1090-mutability/invalid-is_number_or_empty
-Description: Value must be a decimal number or empty.
+_Description: Value must be a decimal number or empty.
Type: error
Template: dump1090-mutability/invalid-is_unsigned_number
-Description: Value must be a non-negative number.
+_Description: Value must be a non-negative number.
Type: error
Template: dump1090-mutability/invalid-is_valid_gain
-Description: Value must be a numeric gain value, or "max", or "agc".
+_Description: Value must be a numeric gain value, or "max", or "agc".
Type: error
Template: dump1090-mutability/invalid-is_non_root_user
-Description: Value must be a username (without spaces) that isn't root.
+_Description: Value must be a username (without spaces) that isn't root.
Type: error
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-hamradio/dump1090-mutability.git
More information about the pkg-hamradio-commits
mailing list